5195 Diverse5300 u g [1] - BTBT Diverse 5300 – Edition 1 – 1st September ’03 BT Diverse Helpline – 08457 908 070 2 Charger Contact points Display option buttons The OPTIONbuttons

User GuideBT DIVERSE 5300ADDITIONAL HANDSET AND CHARGER

This equipment is not designed for makingemergency telephone calls when the power fails.Alternative arrangements should be made foraccess to emergency services.

FOR S

MS

TEXT MESSAGIN

G

YOU MUST S

UBSCRIBE

TO A C

ALLER DIS

PLAY SERVIC

E

AND YOU M

UST NOT W

ITHHOLD

YOUR TELEPHONE N

UMBER.

A QUARTERLY

FEE IS

PAYABLE.

BT Diverse 5300 – Edition 1 – 1st September ’03 – 5195

BT Diverse 5300 – Edition 1 – 1st September ’03

Please open this page for an ‘At a glance’ guideto your BT Diverse 5300.

5

1 2 3

4 6

7 8 9

0

abc def

ghi jkl mno

tuv wxyzpqrs

+

R

➤

➤INT MENU

1


At a glance

1

Microphone

Hash/Keyguard

Hold down to switch thekeypad guard on and off.

Extra Directory

Used to store an additional 10 names andnumbers.

Keypad

Red phone

Press to end a call, returnthe display to idle or turnthe power on and off.

Display

Displays the status of your handset.

Handsfree

Use to answer calls or make a call in handsfree mode.

Green phone

For making andanswering calls.

Recall

Press for use with switchboards and certain Network Services or press and hold to enter a pause.

Calls list

Lets you access yourlists – calls and SMS.

Right hand side

Takes you into the redial list.

Left hand side

Allows you to make an internal call.

Right hand side

Takes you into the menu options.

Left hand side

Lets you set the alarm clock.

Star/bell

Switches the handsetringer on and off.

One button

As well as being thenumber one button holddown to access yourVoice Mail service.

Directory

Used to store numbersand names in the directory.


BT Diverse Helpline – 08457 908 0702

Charger

Contact points

Display option buttons

The OPTION buttons allowyou to select options withineach menu that are shownon the display.

MENUINT

Press the right side of thebutton to confirm (OK)menu selection.

Press the left side of thebutton for and right side ofthe button for when goingthrough the menu options.

Handset displayWhen in IDLE SCREENmode and the clock has been set.

Charger underside

Power socket

3


In this guide

At a glance 1

Main menu structure 4Messages 5

Quick guide to handset settings 6

Quick guide to handsetdisplay icons 7

Introduction 8Unpacking your BT Diverse 5300 8For your records 8

Safety information 9

Setting up 10

Using the telephone 15Making and ending calls 15Handsfree 16Using the directory 17Character map 18VIP ringing 19Redial 22Secrecy 23Paging and internal calls 23

Caller Display and otherBT Calling Features 26

Caller Display 26Calls list 26Call Waiting 29Other BT Calling Features 29

Additional features 32Voice Mail 32

Handset settings 34Alarm clock 36Appointment call 37Walk and talk 41Room monitor 42

Help 45

General information 47Guarantee 47BT Accessories and

Replacement Items 47Technical information 48

Index 49

Hints and tips boxes

In this user guide, we’ve includedhelpful tips and important notes.They are shown in boxes like this.

Helpline

If you experience any dif ficultieswith your BT Diverse 5300, pleasecall the BT Diverse Helpline on 08457 908 070.

Please refer to the separate UsingSMS User Guide for instructions onusing the SMS functionality.




4

Menu structure

Please note that you will only see all the below menu options if you are registeredto a BT Diverse 5310 base station.

SMS Write message

Incoming

Outgoing

Settings Service Centres Service Centre 1 ->

Service Centre 5

SMS Mailboxes SMS > 1-3

Notify Number

Notify Type Missed Calls

Select Services Withhold Number

For All Calls Call Divert All Calls

No Answer

When Busy

Call Waiting On

Off

Cancel Ringback

Additional Features Room Monitor Call Internal

Call External

Level

Walk and Talk

Calender/Clock Set Appointment Enter Date

Enter Time

Enter Text

Alarm Clock Enter Alarm Time

Date/Time

Time Mode 12 Hour

24 Hour

Audio Settings Earpiece Volume

Handsfree Volume

Ringer Volume

Ringer Melody External Calls

Internal Calls

Appointment

Alarm Clock

All Ringer Tones

Advisory Tones Key Tones

Battery Low On

During Call

Confirmation Tone



5

Messages

Press to get to your Mailbox and access your text messages, voicemail andCalls list.

The following functions are available:

Note

If your handset is registered to a BT Diverse 5350 answering machine base, youwill have additional menu’s in Voice Mail. Please refer to your BT Diverse 5350guide to see what further menus are now available.

SMS

Network Mailbox

Calls List Delete entry

Copy to directory

Date and time

Status

Delete list

Handset Settings Auto Answer

Language

Register Handset

Select base

Reset Handset

Base Settings System-PIN

Base Reset

Additional Features Dialling mode Tone

Pulse

Tone-Earth

Recall 80 ms

to

800 ms

Repeater Mode

Listening in System – PIN

Voice Mail Set Key 1 Network Mailbox



Quick guide to handset settingsSwitch the handsetOFF/ON: Hold down.(default is ON)

Switch Keyguard Hold down.on/off

Switch handset Hold down.ringer off

Make a call or .

Redial a number to scroll through the list to dial.

Copy a displayed to display Copy to directory add namenumber in the redial

display shows Save entry . list to the directory

Dial from the to name or number you want to dial . directory

Dial from Calls list to display Calls List to display the number you want .

Adjust handsfree volume whilst in Display shows Volume to decrease/increase volume .handsfree mode

Adjust earpiecedisplay shows Volume to decrease/increase volume .

volume

Make internal call then select handset and click on .

Call all handsets to Call All .

Transfer call to then select handset and click on . When user answers press .

another handset

Put caller on hold then select handset and click on . When finished press .

while you make Back will be selected press .

an internal call

Set date and time to display Calendar/Clock to display Date/Time

enter date enter time . Select am/pm .

➤

➤

OK OK

OK

OK

OK OK

OK

Int

Int

Int

Int

OK

OK OK OK

OK

OK

Menu

Menu

Menu

Menu

Menu

OK

Menu

Pageno

15

40

34

15

22

22

19

27

16

34

23

23

24

24

14



7

Quick guide to handsetdisplay icons

Redial, lists up to the last 10 dialled number.

Flashes to indicate new messages (e.g Calls or SMS).

For calling other handsets.

Opens the menu.

Shows the status of the handset battery.

Scroll through the menu.

Confirms the function displayed.

Scroll left and right when entering numbers or messages.

Deletes numbers/characters (from left to right).

Ringer off.

Handset locked.

Shows the number of the handset and is displayed in top left hand corner.

Appears when the time and date is set, allows access to Calendar/Clockfunctionality.

INT

MENU

OK

�C

eg. 1

If anything is missing, please contactyour place of purchase immediately.

One BT Diverse 5300charger

One BT Diverse 5300 handset

One power supply for the charger

Two AAA rechargeable batteries

One belt clip

Battery compartment cover



8

INT

RO

DU

CT

ION

Introduction

Unpacking your BT Diverse 5300

For guarantee purposes proof ofpurchase is required so please keepyour receipt.

For your records

Date of purchase:

Place of purchase:



9

SA

FET

Y IN

FOR

MA

TIO

N

Safety information

Safety information

GeneralOnly use the power supply includedwith the product. Using anunauthorised power supply willinvalidate your guarantee and maydamage the telephone. Power supplynumber is C39280 -Z4-C478.

For the handset use only AAA 1.2VNickel Metal Hydride (NiMH)rechargeable batteries with a minimumcapacity of 700 mAh. Never use otherbatteries or conventional alkalinebatteries. They could lead to a shortcircuit or destroy the battery casing.Batteries and accessories are availablefrom www.withandwithoutwires.comor call 0870 240 5522.

If the Keyguard is switched on, it isNOT possible to make calls, includingemergency numbers (999/112).

Do not open the charger or handset(other than to change batteries). Thiscould expose you to high voltages orother risks.

Radio signals transmitted between thehandset and base may cause interferenceto hearing aids.

This product should not be used nearemergency/intensive care medicalequipment and should not be used bypeople with pacemakers.

Never dispose of batteries in a fire. Thereis a serious risk of explosion and/or therelease of highly toxic chemicals.

CleaningSimply clean the charger and handsetwith a damp (not wet) cloth, or an anti-static wipe. Never use householdpolish as this will damage the product.Never use a dry cloth as this may cause a static shock.

EnvironmentalDo not expose to direct sunlight.

The product may heat up when thebatteries are being recharged. This isnormal. However, we recommend thatyou do not place the product on antique/veneered wood to avoid damage.

Do not stand your product on carpets orother surfaces which generate fibres, orplace it in locations preventing the freeflow of air over its surfaces.

Do not submerge any part of your product in water and do not use it indamp or humid conditions, such asbathrooms.

Do not expose your product to fire,explosive or other hazardous conditions.

There is a slight chance that your phonecould be damaged by an electrical storm.We recommend that you unplug thepower and telephone line cord during anelectrical storm.



10

SE

TT

ING

UP

Plan the location

Situate your product close enough to a mains power socket so that the cablewill reach.

Make sure it is at least 1 metre awayfrom other electrical products to avoidinterference.

Do not situate the product in thebathroom or other humid areas.

IMPORTANT

Please note that your handset is NOTregistered to a base station. The BTDiverse 5300 handset will be easilyregistered once you complete the steps1 to 3 below.

2 Plug the power supply unitinto the wall socket

Setting up

1 Connect the charger

Plug the power supply cable into thepower socket at the back of your charger.

3 Registering and chargingthe handset

The display is protected by a plasticfilm. You can remove this protectiveplastic film from the display.



11

SE

TT

ING

UP

Insert the two batteries supplied, asindicated inside the batterycompartment and slide the batterycompartment cover shut.

Insert the batteries Registering the handset

If the icons on the display flash continuously...

It means that the handset is notregistered with the base station.

Ensure you have correctly carried outstep 3 above. If the product is still notregistered see Registering Manuallyon page 12.

All additional handsets you purchasewill need to be individually registeredwith the base station before they will work.

The battery cover may be found in thepackaging with the batteries.

WARNING

Under no circumstances should non-rechargeable batteries be used.Using incorrect batteries will invalidateyour guarantee and may damage thetelephone.

To register your handset to a BT Diverse5310 or 5350 base station, place it in themain BT Diverse 5300 base station withthe display facing upward. After approx.one minute, the handset's internalnumber is displayed (e.g. 2). Successful registration is signalled by a confirmation tone.

Replace the newly registered handsetinto the charger and leave to charge forapproximately 16 hours. The chargingstatus icon flashes on the handset toindicate that the batteries are beingcharged.

When the handset is registered thedisplay will show:



12

SE

TT

ING

UP

To de-register a handset

Press the INT navigationbutton to display the list ofinternal handsets registered to the base.

Press the UP or DOWNnavigation button to select thehandset you want to de-register.

Press the MENU options button.

Press the DOWN navigationbutton until the display showsDe-register Handset.

Press the OK options button.

Enter the base station PIN(original setting = 0000).


Display shows de-registerhandset?

Press the OK options buttonto confirm de-registration.

Press the RED PHONE buttonto return to the idle screen.

MENU

OK

OK

OK

INT

If the base is not a 5310 or5350 you will need to followthe user guide for the basestation you are registering the5300 handset to.

To manually register a BT Diverse 5300 handset toanother base station

If you want to register yourhandset to another base stationyou will need to manuallyregister it.

On the handset to be registered:


Press the DOWN navigationbutton until the display showsHandset Settings.


Press the DOWN navigationbutton until the display showsRegister Handset.


Enter system PIN.


If the base station is a BT Diverse 5310 or 5350 basepress the PAGE button forapproximately three seconds.

After approximately one minutethe handset will display itsinternal number. The handsetis now registered and thehandset display will return tothe idle screen.

MENU

OK

OK

OK



13

SE

TT

ING

UP

Battery level icons

When the batteries are almost flat abeep sounds and the display shows theempty battery icon. You will need torecharge your handset before you canuse it. The various states of charge areshown below:

Batteries fully charged

Batteries at 66%

Batteries at 33%

Batteries empty

Out of range?

If you go out of range of a base stationfor a long time while your handset isswitched ON, it may take more than20 minutes to ‘find’ the base stationagain when you come back withinrange. However, by simply switchingthe handset OFF for a moment, thenON again, it will find the base stationwithin a few seconds.

Battery performance

Batteries and case may become warmduring charging. This is normal.

Under ideal conditions, the handsetbatteries should give about 13 hourstalktime or 170 hours standby time ona single charge. However, new NiMHbatteries do not reach their fullcapacity until they have been innormal use for several days.

The charge capacity of rechargeablebatteries will reduce with time as theywear out, so reducing the talk/standbytime of the handset. Eventually theywill need to be replaced. New batteriesare available fromwww.withandwithoutwires.comor call 0870 240 5522.

If you replace the handset batteries with ones that have been fully charged,the battery indicator will not show fulluntil the next charge cycle has beencompleted. Charge the handset untilthe batteries register full again. Fromthen on the display will be correct.



14

SE

TT

ING

UP

Setting the date and time

Press the Menu options button.

Press the DOWN navigationbutton until the display showsCalender/Clock.

Press the OK options button.Set Appointment appears.

Press the DOWN navigationbutton until the display showsDate/Time.


Enter the day/month/year, e.g.05 10 03 for 5th October 2003.


Enter the time – hours/minutes.e.g. 0925 for 9:25am.


Use the UP/DOWN navigationbuttons to select am/pm if in 12hour mode.


Press the DOWN navigationbutton to Time Mode.


Use the UP/DOWN navigationbuttons to select 12 or 24 hourdisplay (12hr is the default).


Press the RED PHONE buttonuntil you reach the idle display.

OK

MENU

OK

OK

OK

OK

OK

OK

4 To fit the belt clip

Fit the belt clip onto the back of thehandset.

SSlloott



15

US

ING

To make an external call

Ensure the handset isswitched ON.

Press the GREEN PHONEbutton. You will hear the dialtone.

Dial the number.

Using the telephone

Preparatory dialling

Enter the phone number first.

If you make a mistake pressthe �C options button toremove any incorrect digits.

Press the GREEN PHONEbutton to dial the number.

Making and ending calls

To end a call

Press the RED PHONE button.

Note

To exit a menu at any time, press theRED PHONE button. This will takeyou back one step. Keep pressing theRED PHONE button to return to theidle screen.

To switch the handset poweron and off

Press and hold the REDPHONE button to switch thehandset off.

Press and hold the REDPHONE button to switch thehandset on again. Call timer

Your handset automatically times theduration of all external calls, showing iton the display during your call and for a few seconds after it is finished.

�C



16

US

ING

To receive an external call

Press the GREEN PHONEbutton to answer the call.

Or

If the handset is on the base,simply lift it up and speak.You do not need to press theGREEN PHONE button.

This is called Autotalk. Youcan switch autotalk off so youalways have to press theGREEN PHONE button toanswer a call, see page 39.

To make a handsfree call

Dial the number

Press the HANDSFREE button.The loudspeaker is switchedon and you hear the numberbeing dialled.

To switch back to using thehandset at any time, press theGREEN PHONE button.

Handsfree

Handsfree allows you to talk to yourcaller without holding the handset andenables other people in the room tolisten to the conversation. Your handsare left free, for example to take notes.

To adjust the handsfreevolume whilst in handsfreemode

Whilst in handsfree mode andyou want to increase ordecrease the handsfree volume.

Press the MENU optionsbutton.

Press the OK options button toselect volume.

Using the LEFT or RIGHTnavigation buttons you caneither increase or decrease thevolume.

Press the OK options button if you want to save the newvolume setting.

MENU

OK

OK

➤

➤

Note

You can test the handsfree function bydialling the BT speaking clock on 123.



17

US

ING

Note

If you need to replace the handset inthe base station during a call, forexample, because the battery is flat,hold down the HANDSFREE button.

To switch to handsfree duringa call

During a call you can switch tohandsfree mode:

Press the HANDSFREE button.The call is transferred to theloudspeaker.

Press the GREEN PHONEbutton to switch back to usingthe handset.

To answer a call in handsfree

When the phone rings:

Press the HANDSFREE button.The call is transferred to theloudspeaker.

To store an entry in thedirectory

Press the DIRECTORY button.

Press the MENU options button.Display shows New Entry.


Enter the telephone number.

Press the OK options button toenter the name.

Enter the name.

Entering names:Enter the name using the letterson the keypad. For example, toenter the name TOM:

Press the 8 button, T appearson the display.

Press the 6 button three timesuntil the display shows O.

Then press the 6 button todisplay m.

For the full character map, see page 18.

Press the MENU optionsbutton. Display shows SaveEntry.

Press the OK options button to confirm.


OK

OK

MENU

Using the directory

You can store up to 100 names andnumbers in the telephone directory.You can enter up to 32 digits and up to16 characters.

OK

MENU

8 tuv

6 mno

6 mno

➤

➤

➤

➤



18

US

ING

Note

The first letter of each name, and thefirst letter after a punctuation markare automatically shown as capitals.Letters are always added to the left ofthe cursor.

Press to switch between capitalsand lower case.

Press to move the cursor.

Press to delete from right to left.

Press 1 to enter a blank space.1

�C

1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14thpress press press press press press press press press press press press press press

1 € £ $ ¥

a b c 2 ä á à â ã ç

d e f 3 ë é è ê

g h i 4 ï í ì î

j k l 5

m n o 6 ö ñ ó ò ô õ

p q r s 7 ß

t u v 8 ü ú ù û

w x y z 9 ÿ y æ ø å

a➔ A ✱ / ( ) < = > %

. , ? ! 0 + - : ¿ ¡ “ ‘ ; –

# @ \ & §

0 +

9wxyz

8 tuv

7pqrs

6 mno

5 jkl

4 ghi

3 def

2 abc

1

Character map

These are the characters you can use when storing a directory entry.



19

US

ING

To dial a number in thedirectory


Press the DOWN navigationbutton to scroll through thenames which are listed inalphabetical order.

Or

Enter the first letter of thename you want, e.g. for Emma,press 3 twice to search fornames beginning with E.

Press the GREEN PHONEbutton. The number is dialled.

To mark a directory entry asa VIP caller


Use the DOWN navigationbutton to scroll to the entryyou want.

Press the MENU button.

Press the DOWN navigationbutton until the display showsVIP Entry.


You will hear the currentmelody. Use the DOWNnavigation button to select amelody (1-10). You will heareach melody as you scrollthrough.


Press the RED PHONE buttonto return to the idle screen.

The entry is now stored in thedirectory with VIP next to it.

To view directory entry


Press the DOWN navigationbutton to scroll through theentries.

Or

Press the first letter of thename you are looking for.


VIP ringing

You can mark directory entries ofcallers who are important to you as VIPcallers. You can also allocate aparticular melody to VIP callers so youcan tell who is calling from the melody.The VIP melody will sound after thefirst ring tone.

MENU

OK

OK

3 def



20

US

ING

To copy an entry to anotherDiverse 5000 handset

You can copy individualdirectory entries from thedirectory or extra directory to another Diverse 5000handset that is registered tothe same base.

Press the DIRECTORY orEXTRA DIRECTORY button toopen the directory.

Press the DOWN navigationbutton to scroll to the entryyou want to copy.


Press the DOWN navigationbutton until the display showsSend Entry.


Use the DOWN navigationbutton to select the handsetyou wish to copy the entry to.



To edit a directory entry


Use the keypad to enter thefirst letter of the name youwish to edit.

Then press the DOWNnavigation button to scroll tothe exact entry.


Press the DOWN navigationbutton until Edit Entry isdisplayed.

Press the OK button.

Edit the number, if necessary,using the LEFT/RIGHT andDELETE buttons.

Press the OK button.

The name will be displayed.Edit the name if necessary byusing the LEFT/RIGHT andDELETE buttons as above.

If the name is correct, pressthe MENU button, Save Entry

is displayed.

Press the OK button. Thedisplay will show Entry Saved.


OK

OK

OK

MENU

MENU

�C

�C

MENU

OK

OK



21

US

ING

To delete an entry

Press the DIRECTORY buttonand open the directory.

Press the DOWN navigationbutton to scroll to the entryyou want to delete.


Press the DOWN navigationbutton until the display showsDelete Entry.

Press the OK options button to confirm. You hear aconfirmation beep.


MENU

OK

To delete the entire directory

Press the DIRECTORY buttonand open the directory.


Press the DOWN navigationbutton until the display showsDelete List.

Press the OK options button.Delete List? is displayed.



MENU

OK

OK

To copy the entire directoryto another Diverse 5000handset

You can copy the entiredirectory or extra directory toanother Diverse 5000 handsetthat is registered to the samebase.

Press the DIRECTORY orEXTRA DIRECTORY button toopen the directory.

Press the DOWN navigationbutton to scroll to the entryyou want to copy.


Press the DOWN navigationbutton until the display showsSend List.


Use the DOWN navigationbutton to select the handsetyou wish to copy the entiredirectory to.



MENU

OK

OK



22

US

ING

To copy numbers shown inthe redial list to the directory

Press the REDIAL optionsbutton.

Press the DOWN navigationbutton to scroll to the numberyou want to copy.


Press the DOWN navigationbutton until the display showsCopy to Directory.


Press the OK options buttonagain.

Enter the name (for details, see page 16).

Press the MENU options button.The display shows Save Entry.



OK

OK

OK

MENU

MENU

Note

To cancel any procedure, press theRED PHONE button until the displayreturns to idle.

Extra directory

Your BT Diverse 5300 has anadditional 10 name and numberdirectory. It is recommendedthat this is used for specialnumbers i.e. doctor, dentist,takeaway numbers.

Press the EXTRA DIRECTORYbutton.

The structure of this directoryis the same as the maindirectory. You can follow theinstructions starting on page 16for storing, dialling, viewing,editing and deleting thesenames and numbers.

To dial a number in the redial list

Press the REDIAL optionsbutton. The last numberdialled will be displayed.

Press the DOWN navigationbutton to scroll through theredial list.

Press the GREEN PHONEbutton to dial the number.

Redial

Your handset automatically saves thelast 10 telephone numbers dialled into aredial list.



23

US

ING

Paging and internal calls

You can alert handset users that theyare wanted, or locate a missing handset.

If you have multiple handsetsregistered to the base you can makeinternal calls between handsets.

Press the INT options button.

A list of all the handsets thatare registered to the base arelisted, you can select any ofthem.

Your handset is identified by INT 1 <.

Press the DOWN navigationbutton to highlight thehandset you want to call andpress the GREEN PHONEbutton.

Or

Press the handset number youwant to call on the keypad.

Or

Select the Call All option to page all the handsetsregistered to the base andpress the GREEN PHONEbutton.

The line will be seized by thefirst handset user to answerthe call.

Call All

INT

Secrecy

When on a call you can talk to someonein the same room, without your callerhearing.

To switch secrecy on/off

During a call:

Press the INT options button.The microphone is switchedoff. The caller hears musicaltones.

Press the RED PHONE buttonto return to the caller.

INT

To delete a number from theredial list

Press the REDIAL optionsbutton.

Press the DOWN navigationbutton to select the numberfor deletion.


Press the DOWN navigationbutton until the display showsDelete Entry.

Press OK to confirm deletion.


MENU

OK



24

US

ING

To put an external call on holdwhile you make an internal call

This enables you to ask anotherhandset user a question andthen get straight back to yourcaller.

During a call:

Press the INT options buttonto display the list of handsets.Your caller hears musicaltones.

Press the UP or DOWNnavigation button to select thehandset you want to call.

Or

Press the handset number youwant to call on the keypad.

Press the GREEN PHONEbutton to call.

You can now speak with theother handset user.

To return to yourexternal caller:

Press the MENU button andBack will be displayed.

Select the OK options buttonwhich will reconnect you tothe external call.

MENU

OK

INT

To transfer an external callbetween handsets

You can forward an externalcall to another handsetregistered to the base.

During an external call:

Press the INT options buttonto display the list of handsets.Your caller hears musicaltones.

Press the UP or DOWNnavigation button to select thehandset you want to call orCall all handsets.

Press the GREEN PHONEoptions button to call. When theother handset answers you cantell them you are transferringthe call.

Press the RED PHONE buttonto put the call through.

Note

You can also put the call throughwithout announcing it by immediatelypressing the RED PHONE button afterdialling the other handset.

Note

You can also page all handsets bypressing the PAGE button on the basestation.

INT



25

US

ING

To answer a waiting callduring an internal call

If you are making an internalcall and hear the Call Waitingtone you can immediately takethe incoming call.


To accept Call Waiting, pressthe OK options button.

Or

To reject Call Waiting, pressthe DOWN navigation button.

The display shows rejectCall Waiting.


MENU

OK

OK

Note

If you accept Call Waiting you willautomatically terminate yourinternal call.



26

BT

CA

LLIN

G F

EA

TU

RE

S

Caller Display and otherBT Calling Features

IMPORTANT

To use Caller Display and Call Waitingyou must first subscribe to the Servicesfrom your Network Provider. For moreinformation on BT’s Calling Featurescall BT free on 0800 800 150.

Note

Calls that are ‘withheld’, ‘unavailable’or ‘international’ are not stored in theCalls list, as there is no telephonenumber sent via the Network.

Note

If you have a new call in your Callslist, the icon will flash on thehandset display.

If you subscribe to a Caller DisplayService you can see who is calling youon your handset display, as well as thedate and time of their call (unless thenumber has been withheld).

If you have stored a name to go withthe number in your handset directory,the name will be displayed as well.

Please ensure that you have stored thefull telephone number, including the areacode, otherwise the name will not matchthe number stored in the directory.

If the caller has withheld their number,the display will show WITHHELD.

If you call from another internalhandset, the display shows the handsetnumber and INT.

Calls list

The Calls list contains the telephonenumbers of your last 10 callers.

Whether you take a call or not, thecaller’s details are stored in the Callslist. You can display, scroll through anddial numbers in the list and copy theminto the directory.

If a call is received when the Calls listis full then the oldest entry will bedeleted automatically.

The button lets you open:

• Text messages (SMS).

• Network Mailbox.

• Calls list.



27

BT

CA

LLING

FEA

TU

RE

S

To view the Calls list

When you have new calls, theicon flashes in the display.

Press the ENVELOPE button.

Press the DOWN navigationbutton until the display shows,e.g. Calls List: 03+07.

In this example, you havereceived 3 new calls and youhave 7 old calls (calls you havealready viewed).

Press the OK options button todisplay the most recent numberthat called you.

Press the UP or DOWNnavigation button to display all your new calls, followed byall your old calls.

WHEN A CALLS LIST ENTRY IS DISPLAYED YOU HAVE THEFOLLOWING OPTIONS:

To call the number:

Press the GREEN PHONEbutton. The number displayedis dialled.

To display the date and timethe call was received:


Press the DOWN navigationbutton until the display showsDate and Time.


The date and time of the callare displayed.

Press the OK options button toreturn to the Calls list.

To display the status of the call:


Press the DOWN navigationbutton until the display showsStatus.


The display shows whether thecall is a New Call or an OldCall and the number of thecall in the Calls list, e.g. 01/10 –the first call in a list of ten.

Press the OK options button toreturn to the Calls list.

OK

MENU

OK

OK

Note

To exit the Calls list at any time,press the RED PHONE button untilyou reach the idle display.

MENU

OK

OK



28

BT

CA

LLIN

G F

EA

TU

RE

S

To copy a number from theCalls list to the directory:


Press the DOWN navigationbutton until the display showsCopy to Directory.


The number is displayed.


The display shows <Enter Name>.

Enter the name of the personusing the keypad.


The display shows Save Entry.


Entry Saved is displayed.

The display automaticallyreturns to show the Calls list.

To delete a call from the Calls list:


The display shows Delete Entry.


The display shows Entry hasbeen deleted!

The display then shows thenext Calls list entry.

To delete the whole Calls list:


Press the DOWN navigationbutton until the display showsDelete List.


The display shows Calls listempty!


MENU

OK

MENU

OK

MENU

OK

OK

MENU

OK

SMS (text messaging)

For instructions on using the SMSfunctionality, please refer to the separate‘Using SMS user guide’.

Network Mailbox

By pressing the button you canalso access your network mailbox facilitywhether it is behind a switchboard orvia 1571.

For instructions on setting up andoperating this function, please refer topage 32, “To set one-touch access to yourmessages”.



29

BT

CA

LLING

FEA

TU

RE

S

To accept a waiting call

During a call when you hearthe Call Waiting beeps:

The number (and name ifstored in the directory) of thesecond caller will appear onthe display.


Display shows Accept Call

Waiting.


Press the UP or DOWNnavigation buttons to togglebetween callers.

Call Waiting

If you also subscribe to a Call WaitingService, when you are on a call andanother person tries to call you, thesecond caller’s number will appear onthe handset display and you will hearan intermittent beep through thehandset. This is to alert you to theother caller waiting to speak to you.

OK

Other BT Calling Features

Your BT Diverse 5300 handset helps youuse your Network’s special services. Forfull details ask your Network provider.

Options before you make a callBefore making a call you can:• Withhold your number from being

sent for one call.• Switch Call Waiting on/off.• Switch off Ring Back.• Divert all calls to another number

(must be subscribed to).

MENU

To withhold your numberfrom being sent

Your number appears on thedisplay of the person you call.You can withhold it from thenext call.


Press the DOWN navigationbutton until the display showsSelect Services.


The display shows WithholdNumber.


Enter the telephone numberyou want to call.

Press the OK options button to dial.

The number is dialled and yournumber is withheld for this call.

OK

OK

OK

MENU



30

BT

CA

LLIN

G F

EA

TU

RE

S

To switch Call Waiting on/off

You can choose whether to haveyour Call Waiting serviceswitched on or off depending onwhat you are doing i.e. if youare using the Internet via yourPC and do not want Call Waitingto interrupt you.


Press the DOWN navigationbutton until the display showsSelect Services.


Press the DOWN navigationbutton until the display showsFor All Calls.


Press the DOWN navigationbutton until display shows Call Waiting.


Press the DOWN navigationbutton to choose between Onor Off.



Ring Back Off

If you make a call and thenumber is engaged you canset your telephone to ring youback once the number is freeby pressing 5. If you want tocancel this request i.e. if youhave to go out before the callrings back.


Display shows SelectServices.


Press the DOWN navigationbutton until Cancel Ringbackis displayed.

You will hear a Networkmessage confirming yourdivert request.



OK

OK

OK

OK

MENU

OK

OK

MENU

5 jkl



31

BT

CA

LLING

FEA

TU

RE

S

To set Call Divert

You can divert all incomingcalls to another number whereyou can be reached.

You can divert calls:

• All calls – calls are putstraight through to the numberyou have set.

• No answer – calls areforwarded if your phone isnot answered.

• When busy – calls areforwarded if your phone isengaged.


Press the DOWN navigationbutton until the display showsSelect Services highlighted.


Press the DOWN navigationbutton until the display showsFor All Calls.


Display shows Call Divert.


Press the UP or DOWNnavigation button to displaythe option you want All Calls, No Answer or When Busy.


Select On or Off.


Enter the telephone numberyou want your calls diverted to.


You will hear a Networkmessage confirming yourdivert request.


OK

OK

OK

OK

OK

OK

MENU

Note

Call Divert requires subscription from your Network provider. Youmay be charged a subscription fee.



32

AD

DIT

ION

AL

FEA

TU

RE

S

To set one-touch access toyour messages


Press the DOWN navigationbutton until the display showsVoice Mail.


The display shows Set Key 1.


The display shows NetworkMailbox.


Enter the telephone number of your messaging service. For example, 1571 to access the‘BT Answer’ voice mail service.

Press the OK options button.Display shows Entry Saved.


MENU

OK

OK

OK

OK

Voice Mail

If you have Call Minder or a NetworkMessaging Service on your telephoneline you can set the 1 button to accessyour messages.

Additional features

To set up quick access toyour Voice Mail service whenbehind a switchboard e.g.Meridian Mail

Follow the steps previouslygiven, but when you come toenter the telephone number ofyour messaging service, youwill need to follow the examplebelow:

Enter the access number foryour messaging service, e.g. 7000.

Press and hold the RECALLbutton until P is displayed toenter a pause in the diallingsequence.

Enter your extension number,followed by a hash, e.g. 1234 #.

Press and hold the RECALLbutton until P is displayed toenter another pause in thedialling sequence.

Enter your PIN followed by ahash, e.g. 000000 #.

The entire number shouldlook like this:

7000P1234#P000000#

R

R



33

AD

DIT

ION

AL FE

AT

UR

ES

Press and hold down the1 button or access your networkmailbox via the button.

When set up it will take you intoyour message service. If duringthe set up you entered yoursecurity PIN as well as thetelephone number you will betaken quickly into yourmessages. If the security PINwas not included you will haveto enter this number now,followed by a #.

You will then be taken intoyour messages.


Note

If you store your security PIN as partof the quick access number, anyonewith access to the handset will be able to retrieve your messages.

Note

If your handset is registered to ananswering machine base i.e. BT Diverse 5350 you will be given thechoice of accessing your answeringmachine messages or NetworkMessaging Service. See your BT Diverse 5350 user guide for furtherinformation.

To retrieve messages fromyour Voice Mail service



OK

1



34

HA

ND

SE

T S

ET

TIN

GS

To change the earpiece volumeand handsfree volume

You can choose from:

• 3 earpiece volume levels

• 5 handsfree loudspeakervolume levels.


Press the DOWN navigationbutton until the display showsAudio Settings.


The display shows EarpieceVolume.

Press the OK options button.You hear the current earpiecevolume.

Press the LEFT or RIGHTnavigation button to set thevolume level you want.


Press the DOWN navigationbutton to select the handsfreevolume.

Press the OK options button.You hear the current handsfreevolume.

Press the LEFT or RIGHTnavigation button to set thevolume level you want.

Press the OK options button toconfirm and save the settings.


Handset settingsYou can choose a range of settings to suit yourpersonal preferences.

To set the ringer volume and melody

You can choose from:

• 5 ringer volumes (originalsetting = 3)

• Crescendo ring (increasingvolume)

• Ringer off• 10 ringer melodies




Press the DOWN navigationbutton until the display showsRinger Volume.

Press the OK options button.You hear the current ringervolume.

MENU

OK

OK

MENU

OK

OK

OK

OK

OK



35

HA

ND

SE

T S

ET

TIN

GS

Press the LEFT or RIGHTnavigation button to set theringer level you want.


Press the DOWN navigationbutton to select the ringermelody.


Select whether external calls orinternal calls:


Press the UP or DOWNnavigation button to set theringer melody you want. The melody is played and itsnumber shown.

Press the OK options button toconfirm and save the settings.

A is displayed next to the Set melody.


OK

OK

OK

OK

Shortcut button

If you want to switch the handsetringer off quickly you can also pressand hold the button. The icon is displayed. To turn the handsetringer back on press and hold downthe button again and the symbolwill disappear.

To change the displaylanguage




Press the DOWN navigationbutton until the display showsLanguage.


Press the DOWN navigationbutton to display the languageyou want.



OK

OK

OK

MENU



36

HA

ND

SE

T S

ET

TIN

GS

Alarm clock

You can use your handset as an alarmclock. You must set the date and timebefore the alarm will work. The alarm willring daily until the setting is turned off.

To set the alarm

Press the ALARM CLOCKoptions button.

Display shows Alarm Clock.


Display shows Enter alarm

time and the first digit of thetime will be flashing.

Enter the time you want thealarm to go off at.


Use the UP/DOWN navigationbutton to select am/pm if in 12hour mode.


Display shows Entry Saved.


The icon will be displayedin the top right of the handsetdisplay to indicate that thealarm has been set.

To stop the alarm ringing

When the alarm goes off itsounds like an incoming calland lasts for about 30 seconds.The display will also show < < < Alarm Clock > > > flashing.

Press any button to switch thealarm off.

To cancel the alarm setting

The alarm will ring daily untilyou cancel the setting.

Press the ALARM CLOCKoptions button.

Display shows Alarm Clock

with a above the OKoptions button.


You will hear a tone and the will disappear. Press the

RED PHONE button until youreach the idle display.

The icon will havedisappeared from the top ofthe handset display.

Note

The alarm will only sound if thehandset is in idle mode. The alarmwill not sound if the Room Monitorfunction is being used.

OK

OK

OK

OK



37

HA

ND

SE

T S

ET

TIN

GS

Appointment call

You can use your handset to remindyourself of an appointment. You can setthe time and date of the appointmentand enter a name for it. The alarm willring on the time and date you have set.

To set the appointment call




Display shows Set Appointment.


Display shows Enter Date:

and the first digit is flashing.

Enter the day and month ofthe appointment, e.g . for 20thMay enter 20.05.


Display shows Enter Time:

and the first digit is flashing.

Enter the hours and minutesof the appointment.


Use the UP/DOWN navigationbutton to select am/pm if in 12hour mode.


Display shows < Enter Text >.

Enter a name for theappointment, e.g. Dentist,using the keypad letters.


Display shows Entry Saved.

Press the RED PHONE buttonto return to the idle display.

The icon will be displayedin the top right of the handsetdisplay to indicate that theappointment has been set.

Note

Your handset will only display anappointment if the handset is in idlemode. An appointment will not bedisplayed if the Room Monitor functionis being used or if a call is in progress.

MENU

OK

OK

OK

OK

OK

OK



38

HA

ND

SE

T S

ET

TIN

GS

To stop the appointment callalarm ringing

When the alarm goes off itsounds like an incoming calland lasts for about 30 seconds.The display will also flash thename of the appointment.

Press the OK options button toswitch the alarm off.

To cancel a set appointment call




Display shows Set Appointmentwith a underneath it.


You will hear a tone and the will disappear to indicate

that the appointment has beencancelled.


The icon will havedisappeared from the top ofthe handset display.

To switch off your handset’sbeeps and tones

You can switch off and on:

• Key beeps when you presseach button on your handset

• Confirmation beeps when youhave finished making a settingor action on your handset.

• Battery Low warning beep.You can also set this to soundonly during a call.




Press the DOWN navigationbutton until the display showsAdvisory Tones.


Press the OK navigationbutton to switch the key tonesOn or Off.

Press the DOWN navigationbutton to move to the next line.


Press the UP or DOWNnavigation button to switch thebattery low beep On or Off or tosound only during a call.

Press the OK options button toconfirm the settings.


OK

OK

OK

OK

OK

MENU

OK

MENU

OK

OK



39

HA

ND

SE

T S

ET

TIN

GS

To switch auto talk on or off

When you receive a call, youcan answer it simply by liftingthe handset off the base station.This is called auto-talk. Whenyou switch auto-talk off, youanswer all calls by pressingthe GREEN PHONE button.




The display shows AutoAnswer.

Press the OK options button.A indicates auto talk isswitched on. Press the OKoptions button again to switchauto-talk off.


MENU

OK

OK

To reset a handset

You can restore a handset toits factory settings.

The handset’s Registration,the Directory and the Calls listare not affected.




Press the DOWN navigationbutton until the display showsReset Handset.


The display shows reset todefault?

Press the OK options button toconfirm reset.

The settings after a reset will be:

Ringer volume 3Ringer melody 1Auto talk OnBattery low beep OnRoom monitor level offRoom monitor level highTime control offDisplay language EnglishRedial list deleted


MENU

OK

OK

OK



40

HA

ND

SE

T S

ET

TIN

GS

To give a handset a namerather than a number

The handsets when registeredare assigned numbers e.g. INT 1.You can give the handset aname instead of a number tomatch the user or location, e.g. Anne or Office. The name can be up to 10characters long.

Press the INT options buttonto enter the internal call menu.

Press the UP or DOWNnavigation button to select thehandset you want to changethe name or number of.

Press the DOWN navigationbutton to display ChangeHandset Name.

To switch keyguard on and off

You can lock the keypad so thatit cannot be used accidentallywhile carrying it around.

Press and hold the # button.When the keyguard isswitched on, the display willshow the icon.

Press and hold the # button toswitch the keyguard off.

INT

To change the internal numberof a handset

Your handsets are automaticallyassigned internal numbersbetween 1-6. You can changethese numbers.

Press the INT options buttonto display the list of handsets.

Press the UP or DOWNnavigation button to select thehandset you want.


Edit Handset No. is displayed.


MENU

OK

Note

This name will only appear in theinternal list of handsets.

INT


Press the �C options button to delete the old name.

Enter the name you want (seepage 16).

Press the OK options button toconfirm.


OK

OK

�C



41

HA

ND

SE

T S

ET

TIN

GS

To switch walk and talk modeon and off

To switch walk and talk on:


Press the DOWN navigationbutton until the display showsAdditional Features.


Display shows Room Monitor.

Press the DOWN navigationbutton until the display showsWalk and Talk.


You will hear a tone and thedisplay will show Walk and Talk.

To switch walk and talk off:


Display shows Walk and Talk

Off.


The display will return to theidle screen.

Enter an available number. If the number is alreadyassigned to another handsetyou hear a beep. Select anothernumber.

If required, press the UP orDOWN navigation button toselect another handset and usethe Keypad to change thenumber.



OK

• The handsets are registered todifferent bases but are both set toBest Base.

• One of the handsets is not registeredand the other handset is registered asBest Base.

• Neither handset is registered.

Walk and talk

If you have more than one Diverse 5000handset then you can use the walk andtalk mode. This allows two handsets tocommunicate with each other outsidethe range of the base station. When theyare out of range, however, they cannotreceive external calls. The maximumrange between the communicatinghandsets is 300 metres outdoors inideal conditions. Please note thatbatteries are used more quickly in walkand talk mode.

Communication between two handsets ispossible when:

• Both handsets are registered to thesame base and have currentlyselected that base.

MENU

OK

OK

MENU

OK



42

HA

ND

SE

T S

ET

TIN

GS

To use walk and talk

To call a handset:

When you have switched walkand talk mode on for at leasttwo handsets as shown onpage 41:

Press the GREEN PHONEbutton.

Display will show Walk and Talk

Call to all

All handsets that are in walkand talk mode will be called.The connection will be madewith the first handset toanswer the walk and talk call.

To answer a call:

Press the GREEN PHONEbutton to take the call.

To end a call:

Press the RED PHONE button.

Room monitor

You can use a handset as a room monitor.If a certain noise level is reached, forexample a baby crying, the handset willautomatically dial an internal or externalnumber which you have set.

The following points should be consideredwhen using the room monitor:

• If you store an external number thathas an answering machine connected,it should be switched off.

• Make sure Call barring is not set.

• Any incoming calls on the handsetbeing used as the room monitor willnot ring at the handset, however, the display will show when you havea call.

• The battery power is used up morequickly. If using for long periods oftime it may be advisable to place thehandset in the base to ensure that thebattery does not run out.

• When an external number is called itwill ring for approximately 90 secondsbut room monitor calls to an internalnumber are unlimited.



43

HA

ND

SE

T S

ET

TIN

GS

To enter an external orinternal number for yourroom monitor call






Display shows CallInternal

Either:

To enter an internal number:


Enter the internal handsetnumber.


Or:

To enter an external number:

Press the DOWN navigationbutton to scroll to Call

External

and press the OK optionsbutton.

Display shows < Enter Number >

Enter the telephone number.

Display shows Entry Saved

and then Room Monitor set to:

with the last four digits of thetelephone number.

To set the room monitorsensitivity level






Press the DOWN navigationbutton until the display showsLevel.


Use the UP/DOWN navigationbutton to select either Low orHigh.


A will be displayed toindicate that the level has been set.


MENU

OK

OK

OK

OK

OK

MENU

OK

OK

OK

OK



44

HA

ND

SE

T S

ET

TIN

GS

To switch the room monitoroff from another phone

When you are called by theroom monitor you can switchoff the room monitor from that phone.

Answer the call.

Press the 9 and # button. The room monitor will beswitched off.

To switch the room monitor off


Display will show Room Monitor off.


Note

The other room monitor functions, e.g. no ringer will remain until youpress the MENU options button and OKoptions button on the handset that isset to room monitor.

MENU

OK

9wxyz



45

HE

LP

Help

Try these solutions to the most common problems.

Problem Possible cause Solution

Handset not registering. The base is not powered. Make sure that the power supplyThere are no batteries in the is plugged in at the base and handset. switched on. Make sure that the

rechargeable batteries (included)are fitted in the handset correctly.Switch the handset off and thenback on again, place the handseton to the base again and leave for approx. 1 minute to tryregistering again.

If this is still unsuccessful, then try amanual registration (see page 12).

You have forgotten your base You have changed the PIN. Try entering the default PIN (0000).station PIN number. If you have changed the PIN and

cannot remember the number you will need to contact the BT DiverseHelpline on 08457 908070.

No display. The handset is switched off. Hold down RED PHONE for1 second.

Charge or replace the batteries.

Nothing happens when you press Keyguard may be switched on. Hold down the # button forany button. 1 second.

No connection between handset Are you out of range of the base Move closer to the base station.and base station. station.

Handset is not registered. Register the handset.

Base station is not switched on. Check the mains power is connectedcorrectly.

Handset on the base does not Is the handset placed on the base Make sure that the handset is placedcharge. properly? on the base or in the charger correctly.

You will hear a confirmation tone.

Are the batteries in correctly? Check that you have put the batteriesin the right way, you will hear aconfirmation tone.



46

HE

LP

Handset does not ring. The handset ringer may be Hold down ✱ to switch the ringerswitched off. back on.

The incoming caller’s number is The caller’s number has been Caller has to allow their number tonot displayed even though you withheld. be sent.have Caller Display.

You keep hearing the error beep You have pressed the wrong Check the prompts in the display(a descending tone). button in a sequence. or refer to instructions in the

user guide.



47

GE

NE

RA

L INFO

RM

AT

ION

General information

Within the 12-month guarantee period:

If you experience difficulty using theproduct, prior to returning yourproduct, please read the Help sectionbeginning on page 45, or contact theBT Diverse Helpline on 08457 908070for assistance.

In the unlikely event of a defectoccurring, please follow the Helpline’sinstructions for replacement or repair.

Outside the 12-month guarantee period:

If your product needs repair after theguarantee period has ended, the repairmust meet the approval requirementsfor connection to the telephone network.We recommend that you call the Helplineon 08457 908070 and ask for detailsof our recommended repair agents.

Guarantee

Your BT Diverse 5300 is guaranteed fora period of 12 months from the date ofpurchase.

Subject to the terms listed below theguarantee will provide for the repair of,or at BT’s or its agent’s discretion theoption to replace the BT Diverse 5300,or any component thereof, (other thanbatteries), which is identified as faultyor below standard, or as a result ofinferior workmanship or materials.Products over 28 days old from thedate of purchase may be replaced witha refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply todefects that occur within the 12month guarantee period.

• Proof of purchase is provided.• The equipment is returned to BT or

its agent as instructed.• This guarantee does not cover any

faults or defects caused by accidents,misuse, fair wear and tear, neglect,tampering with the equipment, orany attempt at adjustment or repairother than through approved agents.

• This guarantee does not affect your statutory rights.

BT Accessories and Replacement Items

For a full range of accessories andreplacement items for BT productsplease call 0870 240 5522, or visit:



48

GE

NE

RA

L IN

FOR

MA

TIO

N

Technical information

How many telephones can you have onthe line?

All items of equipment have a RingerEquivalence Number (REN) which isused to calculate the number of itemsthat may be connected to any onetelephone line.

The BT Diverse 5310 or 5350 (with upto 6 handsets) has a total REN of 1.

Any other instrument provided by BT may be assumed to have a REN of 1 unless stated otherwise.

A total REN of 4 is allowed per telephoneline. (For example: if the BT Diverse 5310or 5350 is used in conjunction withthree extension telephones, each with a REN of 1, then the total REN = 4)

Only use approved power supply itemcode C39280 -Z4-C478.

R&TTE

This product is intended for use withinthe UK for connection to the publictelephone network and compatibleswitchboards.

This equipment complies with theessential requirements for the RadioEquipment and TelecommunicationsTerminal Equipment Directive(1999/5/EC). In demonstration withthe Essential Requirement for efficientuse of the radio spectrum, the productcomplies with TBR6. For a copy of theDeclaration of Conformity pleasecontact the BT Diverse Helpline on08457 908070.



49

IND

EX

Index

Alarm clock 36Appointment call 37Auto talk on/off 39

Batteriescharging 11installing 11performance 13replacing 11warning beeps 13

Beeps and tones 38Belt clip 14

Call timer 15Call Waiting 29Caller Display 26Calling Features 26

Call Divert 31Caller Display 26Calls list 26Call Waiting 29Ring Back 30withhold your number 29Voice Mail 32

Calls list 26call the number 27copy to directory 28delete a call 28delete complete list 28dial a number from 27display status of call 27display time of call 27view 27

Callsend 15external 15handsfree 16holding 24internal 23making 15on hold 24receiving 16redial 22secrecy 23three-way 24transferring 24

Character map 18

Date set 14Delete

all directory numbers 21Calls list call 28complete Calls list 28directory entry 21redial list 23

De-register handset 12Directory 17

character map 20copy entry to another

handset 20copy directory to another

handset 21delete all entries 21delete an entry 21dial a number 19edit an entry 20extra directory 22



50

IND

EX

store name and number 17view an entry 19VIP ringing 19

Display icons 7

Earpiece volume 34Ending calls 15External calls 15Extra directory 22

Guarantee 47

Handsetbeeps and tones 38change internal number 40display icons 7melody 34naming 40on/off 15reset 39ringer 34

Handset quick guide 6Handsfree 16Help 45Holding calls 24

Internal calls 23Internal number – change 40

Keyguard 40

Language change 35

Main menu 4Making calls 15Melody 34Music on hold 23

On/offauto talk 39beeps and tones 38handset power 15keyguard 40secrecy 23walk and talk 41

Page a handset 23Power connection 10Preparatory dialling 15

Quick guidedisplay icons 7handset settings 6

Range warning 13Receiving calls 16Redial 22

copy to directory 22delete 23dial number in redial list 22

Registeringmanually 12your handset 10

REN, how many phones can I have? 48Reset

handset settings 39Room monitor 42

Safety information 9Secrecy 23Setting up 10

Technical information 48Time – set 14Transferring calls 24



51

IND

EX

VIP ringing 19Voice Mail 32

retrieve messages 33set one-touch access 32set up quick access behind

switchboard 32Volume

earpiece 34handset ringer 34handsfree 16, 34

Walk and talk 41

XX

XX X

XX

Visit us at www.bt.com

Offices worldwide

The telecommunications services described in this publicationare subject to availability and may be modified from time to time.Services and equipment are provided subject to BritishTelecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract.

© British Telecommunications plc 2003.Registered Office: 81 Newgate Street, London EC1A 7AJ.Registered in England No. 1800000.BT Diverse 5300 (06/03) 1Designed and produced by The Art & Design Partnership Ltd.

Siemens number: A31008-C002-P001- ✱ -7619 CE compliant to R&TTE Directive (1999/5/EC)

0682


Documents

5195 Diverse5300 u g [1] - BTBT Diverse 5300 – Edition 1 – 1st September ’03 BT Diverse Helpline – 08457 908 070 2 Charger Contact points Display option buttons The OPTIONbuttons