57675754 LAX Standards

8/4/2019 57675754 LAX Standards

1/71

Los Angeles International Airport

LAXTenant Signage

Standards

Prepared by

Airports & Facilities Planning Division

July 2008

8/4/2019 57675754 LAX Standards

2/71

LAX

LA/Ontario

LA/Palmdale

Van Nuys

City of Los Angeles

Antonio R. Villaraigosa

Mayor

Board of Airport

Commissioners

Alan I. Rothenberg

President

Valeria C. Velasco

Vice President

Joseph A. Aredas

Michael A. Lawson

Sylvia Patsaouras

Fernando M. Torres-Gil

Walter Zifkin

Gina Marie Lindsey

Executive Director

1 World Way Los Angeles California 90045-5803 Mail P.O. Box 92216 Los Angeles California 90009-2216 Telephone 310 646 5252 Internet www.lawa.org

July 10, 2008

From the Desk of the Executive Director

Los Angeles World Airports is committed to promoting a consistently high standard

o quality throughout its system o airports. In order to meet these standards, it is

essential that all those doing business in and around the airport work in a spirit o

partnership and cooperation. A key component or working together is to understand

a clearly dened set o standards that can be easily ollowed by all.

The ollowing pages are the Los Angeles International Airport Tenant Signage

Guidelines and Standards detailing sign procedures, the submittal process, regulations

and sign types. These guidelines have been developed to aid new and existing tenants

to smoothly and eectively maneuver through the signage approval process. They have

been developed to establish consistency and a uniorm standard o quality o signage

throughout the airport.

We strongly recommend that you or your representative reerence the guidelines beore

submitting uture sign requests.

Gina Marie Lindsey

Executive Director

Los Angeles World Airports

8/4/2019 57675754 LAX Standards

3/71

2008 Los Angeles World Airports

Index

Index | 1

General Inormation

Introduction . . . . . . . . . . . . . . . . . . 1.1

Purpose & Intent . . . . . . . . . . . . . . . 1.2

Intent o Tenant Signage at LAX . . . 1.2

Purpose o Tenant Signage Standards 1.2

Procedures . . . . . . . . . . . . . . . . . . . 1.3

Sign Submittal & LAWA Approval . 1.3

Review & Compliance . . . . . . . . . 1.3

Standards & Regulations

Sign Regulations . . . . . . . . . . . . . . . 2.1

Responsibility & Intent . . . . . . . . . 2.1

Sign Placement . . . . . . . . . . . . . . . 2.1

Illumination . . . . . . . . . . . . . . . . 2.1

Assemblage . . . . . . . . . . . . . . . . . 2.2

Materials . . . . . . . . . . . . . . . . . . 2.2

Fabrication & Installation . . . . . . . 2.3

Maintenance . . . . . . . . . . . . . . . . 2.3

LAWA Standard Font . . . . . . . . . . 2.3

Applicable Code Requirements . . . . . 2.4

ADA Code Requirements . . . . . . . . 2.5

Regulation Enorcement . . . . . . . . 2.6

Alliances, Partnerships & Code Share 2.7

LAWA Waynding Signs . . . . . . . . . 2.8

U.S. Customs Signage . . . . . . . . . . . 2.9

Temporary Signs . . . . . . . . . . . . . . . 2.10

Requirements . . . . . . . . . . . . . . . 2.10

Typical Temporary Sign Types. . . . . 2.11

Non-permitted Temporary Signs . . . 2.11

Construction Signs . . . . . . . . . . . . 2.11Promotional Signs . . . . . . . . . . . . 2.11

Terminal Signs

Exterior

Jetway . . . . . . . . . . . . . . . . . . . . . . 3.1

Curbside Check-in . . . . . . . . . . . . . . 3.2

Curbside Check-in - Alliance . . . . . . . 3.3

Interior

Ticketing Backwall . . . . . . . . . . . . . . 3.4

Ticketing Backwall - Alliance . . . . . . 3.5

Ticket Kiosk . . . . . . . . . . . . . . . . . . .3.6

Queue. . . . . . . . . . . . . . . . . . . . . . . 3.7

Countertop . . . . . . . . . . . . . . . . . . . 3.8

Luggage Size Check. . . . . . . . . . . . . . 3.9

Boarding Wall . . . . . . . . . . . . . . . . . 3.10

Baggage Claim . . . . . . . . . . . . . . . . . 3.12

Baggage Service Oce . . . . . . . . . . . . 3.14

Baggage Service Oce - Alliance . . . . 3.15

Inormation Display System . . . . . . . . 3.16

Passenger Lounge Directional . . . . . . . 3.17

Passenger Lounge Identication . . . . . . 3.18

Oce Identication. . . . . . . . . . . . . . 3.19

Ofce & Warehouse Signs

Exterior

Restrictions . . . . . . . . . . . . . . . . . . . 4.1

Tenant Sign Types . . . . . . . . . . . . . . . 4.2

Master Tenant Standards . . . . . . . . . . 4.3

Master Tenant Signature Sign Sizes . . . 4.4

Sub-Tenant Standards . . . . . . . . . . . . 4.5

Sub-Tenant Signature Sign Sizes . . . . . 4.6

Signature Sign Sizes . . . . . . . . . . . . . 4.7

Version

07.2008


Tenant Signage Standards

8/4/2019 57675754 LAX Standards

4/71




Index | 2

Hangar & Service Building Signs

Exterior

Restrictions . . . . . . . . . . . . . . . . . . . 5.1

Master Tenant . . . . . . . . . . . . . . . . . 5.2

Master Tenant Sign Types . . . . . . . . . 5.3

Sub-Tenant . . . . . . . . . . . . . . . . . . . 5.6

Sub-Tenant Sign Types . . . . . . . . . . . . 5.7

Signature Sign Sizes . . . . . . . . . . . . . 5.10

Facilities Signs

Exterior

Street Address. . . . . . . . . . . . . . . . . . 6.1

Monument . . . . . . . . . . . . . . . . . . . 6.2

Fence . . . . . . . . . . . . . . . . . . . . . . . 6.3

Directional . . . . . . . . . . . . . . . . . . . 6.4

Design Review Process

Step 1 - Conceptual Design Submittal . . . . . 7.1

Conceptual Design Submittal Checklist . . . 7.1

Step 2 - Design Development &

Construction Documents . . . . . . . 7.2

Tenant Construction . . . . . . . . . . . . . . 7.2

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1

Index

Version

07.2008

8/4/2019 57675754 LAX Standards

5/71


GeneralInormation

8/4/2019 57675754 LAX Standards

6/71


People looking or destinations and inormation

require signstext and graphic elements to guide

them. In a civic environment such as Los Angeles

International Airport (LAX), signs identiy trac

routes, buildings, acilities and activities. These are

all elements which communicate inormation.

Graphic elements are an integral part o the visual

landscape at LAXthe image over-lap o two and

three dimensional orms together make up our civic

architecture. It is important that these elements,

which identiy and inorm, be visually integrated totheir site and structure.

The LAX Tenant Signage Standards are designed to

promote a well-integrated, complete signage program

that will help the public use the airport eciently

and with a minimum o conusion. These standards

cover both exterior as well as interior signage or all

o the property under the jurisdiction o Los Angeles

World Airports (LAWA).

These Standards will unction as an ecient

reerence source, while at the same time promote

tenant signage that is attractive and utilizes

colors and materials that are compatible with itssurroundings.

Please note that these Tenant Signage Standards

are not applicable to concession signage. For that

inormation reer to LAWAs Concession Design

Guidelines document dated August 2006.

General Inormation | Introduction

General Inormation | 1.1



8/4/2019 57675754 LAX Standards

7/71





General Inormation | Purpose & Intent

Intent o Tenant Signage at LAX

Tenants are encouraged to be expressive and

imaginative when designing signs to aid the public

in using airport acilities eciently and with a

minimum o conusion. In short, the acceptable

criteria or each sign is that it address the immediate

needs o airport users.

The intent o signage is to provide adequate direction

so that the sign systems will:

1. Provide an eective source o needed

inormation.

2. Maintain quality o design that is compatible

with the aesthetics o LAX. Great importance

is placed on good taste, originality and ne

materials.

3. Be attractive and use colors and materials that

are compatible with the design o individual

terminals.

Advertising is allowed on an annual exclusive

contractual basis. Inquiries are to be directed to:

Concessions Manager


Concessions Services Division

7301 World Way West, 2nd Floor

Los Angeles, CA 90045

Purpose o the Tenant Signage Standards

The Tenant Signage Standards establish conormance

criteria or all tenant signage proposed or existing,

new and remodeled acilities under LAWA

jurisdiction at the airport and its environs. These

Standards replace the LAX Sign Code dated April

16, 1975. They are meant to provide the maximum

limitations or tenant signing o any kind allowed in

these areas.

The Standards will be periodically reviewed by

LAWA and are subject to revision at its discretion.

Tenants will be notied o revisions to the Standards.

All tenants are encouraged to submit suggestions or

improvements to:

Chie o Airport Planning



1 World Way, Room 208


8/4/2019 57675754 LAX Standards

8/71




Sign Submittal & LAWA Approval

Tenants are required to ollow the submittal process

or all proposed signs as detailed in the Design

Review Process section o these Standards. All

tenant signs must have the written approval o the

Chie Airport Engineer, or his/her designee prior to

installation. New, changed or renovated signs shall

conorm to these guidelines.

It is understood that any signs not having the express

written approval of the Chief Airport Engineer

shall not be installed. Any existing installed sign not

having the approval o LAWA shall be removed.

I any existing sign exceeds the limitation stated in

the Standards, but has been previously approved

by LAWA, that sign shall be allowed to remain

installed. However, i there is to be a change,

modication, renovation or relocation in any way

involving previously approved and installed signage,

LAWA shall require that this signage be upgraded to

conorm to the current Standards.

Temporary signs must be submitted or review to

the Airports & Facilities Planning Division prior

to installation. Reer to the Temporary Signs

inormation in the Standards & Regulations section

or details.

Review & Compliance

All signs are subject to periodic reviews by LAWA

to insure compliance to these Standards. Signs

will be inspected or content compliance and to

insure that the minimum sign abrication quality is

maintained. This will include sign structure, paint

or nish, and applied materials, i.e., plastics, vinyl

lettering, asteners, etc. Internally illuminated signs

will be checked or proper working order beore nal

acceptance.

In the event that an existing sign is ound to be out

o compliance with these Standards, LAWA will

notiy the tenant with a written notice. The tenant

is required to remove and reurbish the sign up to

or exceeding the quality o the original permitted

condition according to the guidelines described in the

Regulation Enorcement section o these Standards.

I the tenants sign does not satisy permitted

condition standards at the end o the prescribed

adjustment period, LAWA reserves the right to

directly resolve the matter by removing it and billing

all costs to the tenant.

General Inormation | Procedures


8/4/2019 57675754 LAX Standards

9/71


Standards &Regulations

8/4/2019 57675754 LAX Standards

10/71



Tenant Signage StandardsStandards & Regulations | Sign Regulations

Standards & Regulations | 2.1

Responsibility & Intent

1. Signage in public areas is the responsibility

o LAWA. Signage within leased areas is the

responsibility o the tenant.

2. All signs shall be o an inormative nature

designed to meet the immediate needs o the

public. Signs o an advertising or promotional

nature, including contact inormation, are

not permitted.

3. Freestanding or pole-mounted signs are used or

inormation and directional inormation only.

4. All signs shall meet all ederal and local saety

standards and code requirements, including all

ADA Guidelines.

5. Signs not covered in these standards are to be

considered prohibited. Exceptions may

be granted i such additional signage serves

the public.

Sign Placement

1. No signs shall be permitted on doors or windows

except those required to meet saety standards.

Some exceptions are noted in these Standards.

2. No signs shall be permitted on the roo o any

building. This regulation also applies to any

structure atop a building, such as ticketing

building pylons.

3. All signs are to be suraced-mounted within the

architectural elevation o the demised premises

unless otherwise approved by LAWA.

4. No signage shall be permitted on semicircular,

center metal walls in the remote bus holding

areas or semicircular center core walls in the

satellite buildings unless otherwise approved

by LAWA.

Illumination

1. Only one sign per business establishment may

be illuminated between the hours o sunset and

10:30 p.m., according to the City o Los Angeles

energy conservation ordinance.

2. Only individually mounted, internally

illuminated letters, pin mounted and back

washed letters are acceptable. No cabinet signs

are permitted.

3. No exposed neon, animated, or fashing signs

are permitted. Internally illuminated signs

shall be kept to a minimum using translucent

acrylic diusion to control the brightness.

Illuminated signs will be allowed only in specic

circumstances mentioned in the text o these

standards. All illuminated signs shall meet all

code requirements and bear the label o the

Underwriters Laboratories, Inc.

8/4/2019 57675754 LAX Standards

11/71





Assemblage

1. No exposed can, raceways, or crossovers shall be

permitted.

2. Capital Height (Cap. Ht.) is dened as the

distance rom the top o a capital letter orm

to the bottom o the same letter orm. Capital

Height when applied to number orms is

measured as the distance rom the top to the

bottom at the tallest numeral.

3. Letter area height is dened as the distance rom

the top o the top line o the sign to the bottom

o the last line o the sign. This also applies to

the maximum vertical distance o sign artwork

to include logo/signatures, copy, etc.

4. Copy application must be achieved by screen

process or cut-out lettering appliqu only.

5. Reerence is made within the text o these

Standards to the term corporate signature.

This is dened as the companys name inrecognized style and orm, and/or the

companys logo.

Acceptable Materials

1. Porcelain enamel on aluminum or

aluminized sheet steel

2. Anodized aluminum

3. Paint on aluminumpaint must be linear

polyurethane or all under coats and top coats

4. Acrylic and berglass with satin nish only

The materials listed above are not acceptable or

illuminated signs.

Unacceptable Materials

1. Rustic, unnished or distressed wood

2. Rustic stone or brick

3. Plastic

4. Any oxidizing metal

5. Clay

6. Simulated or aux nishes

Figure 2a: Capital height

8/4/2019 57675754 LAX Standards

12/71





Standards & Regulations | Sign Regulations

Fabrication & Installation

The abrication and installation o all signs shall be

o a permanent nature using established methods and

quality materials and hardware. Only high quality

workmanship perormed by qualied tradespeople

will be permitted.

Attachment hardware and connections o all signs

must be non-corrosive and engineered to insure

public saety.

Fabrication and installation must comply with

all applicable City o Los Angeles Building and

Sign Codes.

Maintenance

Tenants must maintain each approved sign in a neat,

clean, orderly and sae manner. Failure to maintain

an approved sign shall result in revocation o

approval and subsequent removal.

LAWA Standard Fonts

Exterior Signage

The LAWA approved ont or exterior signs at Los

Angeles International (LAX), Van Nuys (VNY),

and Palmdale Regional (PMD) Airports is Franklin

Gothic Demi. The approved ont or Ontario

International Airport (ONT) is Helvetica Bold

Condensed.

Interior Signage

Helvetica Medium is the ont standard or interior

waynding signs or all airports under LAWA

jurisdiction.

The approved onts should be used as the deault

typeaces respectively or all directional and

secondary text on signage where the tenants

corporate ont is not used.

Figure 2b: The LAWA approved onts.

Franklin Gothic Demi

abcdeghijklmnopqrstuvwxyz 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ [!@#$%^&*()?]

Helvetica Bold Condensed

abcdefghijklmnopqrstuvwxyz 0123456789

ABCDEFGHIJKLMNOPQRSTUVWXYZ [!@#$%^&*()?]Helvetica Medium

abcdefghijklmnopqrstuvwxyz 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ [!@#$%^&*()?]

8/4/2019 57675754 LAX Standards

13/71





Applicable Code Requirements

The tenant shall have sole responsibility or

compliance with all applicable ederal, state,

and local building codes, ordinances and other

jurisdictional regulations including, but not limited

to, the ollowing:

a. City o Los Angeles Department o

Building & Saety

b. City o Los Angeles Fire Department

c. Los Angeles County Department o

Health Services

d. City o Los Angeles Department o

Public Works

e. City o Los Angeles Cultural Aairs

Department

. Regional Water Quality Control Board

g. SBC Communications

h. Southern Caliornia Gas Company

i. Caliornia Occupational Saety and

Health Administration (CALOSHA).

Access or the disabled shall be provided, as required

by the City o Los Angeles, Title 24 o the Caliornia

Administrative Code, the Americans with Disabilities

Act o 1990, and any and all other applicable

statutes, rules, regulations, codes and ordinances.

The tenant shall be responsible or submitting the

construction documents to the City o Los Angeles

Department o Building and Saety and other

jurisdictional agencies or plan check reviewand approval and or securing all the necessary

building permits.

8/4/2019 57675754 LAX Standards

14/71





ADA Code Requirements

All tenants are required by law to adhere to the

most current Americans with Disabilities Act (ADA)

guidelines. The guidelines dene our categories o

interior and exterior signs:

1. Permanent Room Designation Signs

Signs which designate permanent rooms and

spaces whose designation will not change,

must comply with the highest standards. This

includes tactile and Braille lettering raised at

least 1/32" rom the plaque surace. They must

use exclusively, upper case characters o at least

5/8" cap height, but not exceeding 2" cap height.

Typestyle shall be sans seri or simple seri.

Characters must have a width-to-height ratio

o between 3:5 and 1:1, and a stroke width-to-

height ratio o between 1:5 and 1:10. The use

o pictograms or symbols on permanent room

designation signs is optional, but where used

they must be located on a border or eld o atleast 6" in height. An equivalent Grade 2 Braille

and tactile written description must be placed

directly below the symbol (with the exception

o arrows) and may not intrude into the 6" eld

specied above. Characters and background

must be eggshell, matte or other non-glare nish,

which is recommended as between 11 and 19

degrees on a 60-degree glossimeter. Characters

are recommended to have a minimum 70%

refectance contrast with their background.

2. Overhead Signs

Signs that are protected or suspended overhead

including hanging or fag mounted signs

must meet requirements or clearance, character

proportion and height, sign nish and contrast.

They may use upper and lower case characters,

cap height must be 3" minimum, and there must

be at least 80" o clearance below the bottom o

the sign.

3. Directional and Inormational Signs

Wall mounted signs which provide direction

to or inormation about unctional spaces are

not required to have tactile and Braille lettering.

However, they must meet requirements or

character proportion, sign nish and contrast.

They may use upper and lower case characters.

The cap height is not specied, but characters

and numbers on signs shall be sized according to

the viewing distance rom which they are to be

read.

4. Temporary Inormation Signs

Building directories, menus and all other signs

that provide temporary inormation about rooms

and spaces, such as the current occupants name,

are not required to comply with the guidelines.

5. Exterior Signs

The requirements or exterior and interior signs

are generally the same. Most exterior signs

are not required to have tactile and Braille

letteringother than in the situation where

a sign is provided to designate a permanent

room, such as a bathroom which is directly

accessed rom the outside. However, exterior

signs must meet requirements or character

proportion, sign nish, and contrast. They may

use upper and lower case characters. Similarly,

all o the conditions aecting overhead signs

and protruding objects described in this section

should be observed.

8/4/2019 57675754 LAX Standards

15/71






Regulation Enorcement

All tenants must obtain the written approval o

LAWA or each sign. Any sign installed without the

written approval o LAWA shall be removed.

Upon notication o the demand to remove a non-

conorming or non-permitted sign, the tenant must

removeapermanentsignwithin14days

removeatemporarysignwithin5days.

I the tenant does not remove the sign in the allotted

time, LAWA will remove it and any expenses or this

service will be paid by the tenant.

As already stated, previously approved existing signs

that do not conorm to these Standards shall be

allowed to remain installed. However, i there is to

be a change, modication, renovation or relocation in

any way involving previously approved and installed

signage, LAWA shall require that this signage be

upgraded to conorm to the current Standards.

Tenants may change or alter an existing permanent

sign only with the written approval o LAWA. Anysign modications will be the responsibility o the

tenant. I leasehold improvement is modied, LAWA

shall require the signage to conorm to the current

sign codes.

All tenant signs are subject to discretionary periodic

reviews by LAWA.

8/4/2019 57675754 LAX Standards

16/71




Alliances, Partnerships and Code Share Signs

To address the impact o airline alliances to airport

signage, LAWA has established standards or the

display o sub-tenant identication. Alliance graphics

will be limited to corporate signatures, subordinate

and adjacent to the primary tenants signature sign.

Alliance signs may be ganged or grouped beside

primary tenant signs and may not exceed the

approved primary corporate identity sizes.

Alliance signs are permissible in most areas where

primary tenant identity signs are displayed, at the

discretionary approval o LAWA.

All alliance signs must meet or exceed the regulationsset out in these Standards or materials, abrication

and installation. Tenants may only display code share

signs ater submittal toand approval byLAWA

or each sign. Airlines listed on the alliance signs

must have an operating permit and current base with

LAWA.

Reer to the Airline Alliance inormation in the

Terminal Signs section or details.



8/4/2019 57675754 LAX Standards

17/71





LAWA Wayfnding Signs

Airport waynding signs are the sole jurisdiction o

LAWA. Included in this sign category are roadway

signs, parking structure signs, terminal under-

canopy signs located along the upper and lower level

curbsides, the interior terminal waynding signs

and directional signs in public buildings controlled

by the airport authority. All exterior waynding

signs at LAX are limited to the generic LAWA ont,

Franklin Gothic Demi. All interior waynding signs

and identication signs or TDD stations, telephones,

AED units, etc. are limited to the Helvetica Font.

No logos or graphics will be displayed on LAWA

waynding signs.

Roadway and terminal under-canopy signs are

restricted to airline names; where appropriate, an

airline may be designated as an International

carrier i operating both domestic and international

fights. Designations not permitted on roadway and

terminal signs include such terminology such as

First Class, Business Class, Group Check-In,

Gold Member, Platinum Member, Executive

Class, Economy Class, etc. All designations are

the sole discretion o LAWA.

Where possible, each airline will be given its own

sign can in ront o the terminal in which it operates.

When space is at a premium, it is LAWAs discretion

to determine how best to utilize the space available.

Tenants may request directional text or display on

LAWAs interior directional signs. Terminology is

limited to text directing travelers to ticketing, the

boarding gates, acilities and services oered to the

public. Individual concessions or airline names arenot displayed on terminal waynding signs.

8/4/2019 57675754 LAX Standards

18/71





U.S. Customs Signage Guidelines

Signage in the Federal Inspection Service Area

(FIS) in Terminal 2 is the responsibility o LAX2

Corporation. Signage in Federal Inspection Service

Areas in Terminals 4, 5, 6 and 7 is the responsibility

o the Airline Tenants. Signage in the Tom Bradley

International Terminal is the responsibility o Los

Angeles World Airports.

All signage in the Federal Inspection Service Areas

are mandated to strictly adhere to U.S. Customs and

Border Protection signage guidelines or verbiage,

colors and sign specications and can be ound in the

CBP signage manual.

All signage in the Federal Inspection Service Areas

must be generic in nature. Reerences to the U.S.

Department o Agriculture, U.S. Department o

Immigration and U.S. Customs Department must be

removed since they exist under the umbrella o one

government agency.

8/4/2019 57675754 LAX Standards

19/71




Temporary Signs Requirements

Temporary signs may only be displayed ater

submittal toand approval byLAWA. The

ollowing requirements apply to all types and

conditions o temporary signs.

Terms and Conditions

1. All signs are subject to approval on a case-by-

case basis prior to abrication.

2. Approval to display is based on the proposed

location and intent with a limited time permit.

3. Approved temporary signs may be visible or a

term not to exceed 45 days.

4. No temporary sign may be visible or consecutive

30-day terms.

5. A period o not less than 60 days must elapse

beore another 30-day term may occur.

6. Sign content is restricted to inormation only.

No advertising allowed.

7. Submittals must include scaled dimensioned

drawings indicating copy, colors, abrication

method and materials, and a location map.

All submittals are due a minimum o 14 days prior to

abrication. Submit to:

Chie o Airport Planning



1 World Way, Room 208


Standards & Regulations | Temporary Signage


8/4/2019 57675754 LAX Standards

20/71




Typical Temporary Sign Types

Banners

1. Location: exterior and interior

2. Materials: canvas or vinyl with grommets

3. Size: typically 8 eet wide by 3 eet high

Sandwich Boards and A-Frames

1. Location: exterior only

2. Materials:

Allmaterialsmusthaveanon-glaresurface.

Laminatedprintsmustbemountedtoa

substrate such as polystyrene oam core

board, sintra type PVC board, lexan or

plexiglass. Signs are limited to display in air

weather only.

Exteriorgradeboardwithpainted,screen

printed or vinyl copy.

Allsignswithreectivevinylcopymustbe

displayed on a refective vinyl background

with a refective border using engineering

grade or diamond grade vinyl.3. Size: minimum 3 eet wide by 4 eet high. Size

limitations subject to location review.

Stanchions

1. Location: exterior and interior covered areas

only. Must be stored at the end o the day or

usage period.

2. Frame/display area size: minimum 14 inches

wide by 18 inches high, maximum 24 inches

wide by 30 inches high.

3. Stanchion post: maximum 40 inches high.

4. Base size: minimum 14 inch diameter or

standard H base

Non-permitted Temporary Signs

The ollowing signs and sign materials are not

permitted and may not be displayed on a

temporary basis.

Photocopypapersigns

Hand-writtenpapersigns

Paperbanners

Unlaminatedsigns

SignsnotapprovedbyLAWAsProject

Planning and Development Division

Construction Signs

Construction signs must conorm to the standards

or temporary signs. Tenants must make a submittal

or each construction sign. LAWA approved

construction signs may be visible during the period

o construction only and must be removed within ve

days rom completion o construction.

Promotional Signs

Signs or items o a promotional nature may be

displayed only i such signs or items are rst

authorized in writing by the LAWA Deputy Executive

Director, Airports & Facilities Planning Division, or

his/her designated representative, with the written

understanding that such promotional signs or items

are o a temporary nature.

Standards & Regulations | Temporary Signage


8/4/2019 57675754 LAX Standards

21/71


Terminal Signs

8/4/2019 57675754 LAX Standards

22/71



Tenant Signage StandardsTerminal - Exterior | Jetway

Description

Tenant corporate signature signs shall be permitted

on jetway walls as permanently mounted panels.

Location

Aprimarysignaturesignpanelmaybeattached

to the exterior jetway wall section closest to

the aircrat. Sign panel position is horizontally

centered and 6 inches above center vertically.

Signmustbeinstalledaminimumof4feet

away rom support yokes, power cabinets,

or hydraulics and shall not interere with the

mechanical, electrical or physical operation o

jetway.

Nosignsarepermittedontoporbelowthe

jetway, on pivot unit or operator station.

Sign Size

The maximum panel dimensions are 4 eet square

(4' x 4') and not more than 2 inches thick.

Image & Text Size

Image is limited to the corporate signature only; no

additional copy, slogans or inormation.

Colors & Fonts

The image and text o the corporate signature colors

only are permitted.

Materials

Sign construction is limited to a metal panel with

painted or silkscreened graphics. No dimensional

elements, illumination, windows, rames,

attachments or cutouts are permitted. Fixture by

concealed mechanical asteners.

Quantity

One (1) sign is permitted per jetway side.

Maximum total is 2 signs on each jetway.

Figure 3a: Corporate signature panel sign on jetway exterior wall.

4'-0" sqmax

Terminal Signs | 3.1

8/4/2019 57675754 LAX Standards

23/71



GRAPHI

CHERE

Terminal - Exterior | Curbside Check-in

Figure 3b: Curbside identication signs showing tenant corporate signature and LAWA standard ont Franklin Gothic Demi

Terminal Signs | 3.2Los Angeles World Airports 2007

Baggage Check In

6" max cap ht

Baggage

Check In________

Wait Here

7'-6"max ht

18"

14"

3'-6"

1'-6"

2

1

Description

Tenant corporate signature signs shall be permitted

on curbside check-in counters.

Location

1 A primary signature sign may be attached to

the check-in counter. No signs permitted on walls,

sidewalks, conveyor systems, or housings.

2 A secondary stanchion sign is permitted at the

head o a queuing line.

Sign Size

1 The primary signature sign shall be a maximum

panel size o 3 eet, 6 inches wide by 18 inches high.

2 The stanchion top sign shall be ramed and

rmly attached to the stanchion post top only.

Maximum dimensions are 14 inches by 18 inches.

Image & Text Size

1 The combined letter area and logo height is not

to exceed 6 inches and shall t comortably within

the sign panel.

2 The corporate signature and accompanying text

shall t comortably within a panel sign. Text shall

not exceed a maximum capital height o 6 inches.

A minimum 1-inch edge margin shall be maintained

around the copy.

Colors & Fonts

1 The colors and onts o the corporate signature

are acceptable. Text should ollow the tenants

corporate guidelines or use the LAX exterior

waynding ont.

2 The colors and onts o the corporate signatureare acceptable. Text should ollow the tenants

corporate guidelines or use the LAX waynding

ont.

Materials

1 The sign panel shall be painted aluminum or

acrylic with screened or vinyl copy.

2 Standard rame as provided by manuacturer.

Quantity

1 2 One (1) per check-in position.

8/4/2019 57675754 LAX Standards

24/71



Tenant Signage StandardsTerminal - Exterior | Curbside Check-in - Alliance


Description

Airline alliance tenant signature signs shall be

permitted on curbside check-in counters.

Location

A signature sign may be attached to the check-in

counter. Multiple panels shall be displayed in one line

below the primary tenant sign. No signs permitted

on walls, sidewalks, conveyor systems, or housings.

Sign Size

The airline alliance signature sign shall be a

maximum panel size o 3 eet, 6 inches wide by

9 inches high.

Image & Text Size

The maximum combined letter and logo height per

airline name shall not exceed 1 inch. Names shall be

fush let columns. A minimum 1-inch edge margin

shall be maintained around the copy on the panel.

Colors & Fonts

The colors and onts o the corporate signature are

acceptable. Text should ollow the tenants corporate

guidelines or use the LAX exterior waynding ont.

Materials

The sign panel shall be painted aluminum or acrylic

with screened or vinyl copy.

Quantity

One (1) per check-in position.

9"

Baggage Check In

3'-6"

Figure 3o: Airline alliance identity sign on the baggage check-in counter.

8/4/2019 57675754 LAX Standards

25/71





Terminal - Interior | Ticketing Backwall

Figure 3c: Dimensional copy is the preerred treatment or corporate signature signs on walls behind ticket counters.

18" maxCL

Lease Line

Description

Tenant corporate signature signs may be displayed on

the wall behind the ticket counter. Non-standard sign

types, (e.g., edge-lit or back washed illumination)

as well as wall treatments (subdued graphics, wall

textures) are acceptable with approval.

Location

The signature sign shall be centered vertically over

the counter space on the wall directly behind the

counter.

Sign Size

The total length shall not exceed 75% o the length

o the lease line.

Image & Text Size

The preerred sign is an individually mounted

dimensional tenant corporate signature with a logo/

logotype maximum height o 18 inches.

Colors & Fonts


acceptable. The nish and illumination must match

or exceed LAWA signage standards.

Materials

Acceptable materials are painted aluminum or

acrylic.

Quantity

One (1) sign is permitted or each 25 eet o

the lease line.

8/4/2019 57675754 LAX Standards

26/71





Terminal - Interior | Ticketing Backwall - Alliance

Description

Airline alliance signature sign panels listing airlines

that have an operating permit and current base with

LAWA is permitted in the baggage service oce area.

As an alternate, airline alliance corporate signatures

may be abricated as dimensional graphics.

Location

All airline alliance signs shall be installed to the

side o the primary tenant identity sign on the wall

directly behind the counter. No alliance sign shall be

displayed apart or separate rom the primary

tenant sign.

Sign Size

The airline alliance sign panel shall be a maximum

height o 18 inches and not more than 1 inch thick.

Image & Text Size





Colors & Fonts


acceptable. The nish must match or exceed LAWA

signage standards.

Materials

Acceptable materials are painted aluminum or acrylic

with screened or vinyl graphics. Internal illumination

o alliance signs is not permitted.

Quantity

One (1) airline alliance tenant sign is permitted or

each primary corporate signature sign per 25 eet o

the lease line.

18" max

Lease Line

Figure 3p: Alliance identity signs beside the primary tenants corporate signature sign behind the ticketing counter.

8/4/2019 57675754 LAX Standards

27/71



Tenant Signage StandardsTerminal - Interior | Ticket Kiosk


6" max

2" margin

Figure 3d: Ticket kiosk with tenant signature sign.

Description

A tenant corporate signature may be axed to the

structure surrounding a ticket kiosk when a kiosk is

installed away rom the primary ticketing area.

Location

The corporate signature shall be vertically and

horizontally centered on the customer side o the

kiosk. No signs are permitted on the back or sides o

the monitor or its cabinet.

Sign Size

The sign size shall not exceed 75% o the total

rontage area o the kiosk.

Image & Text Size

The combined letter area and logo height shall not

exceed 6 inches. A minimum 2-inch edge margin

shall be maintained around the signature.

Colors & Fonts

The image and text o the corporate signature shall

contrast with the kiosk background color. Fonts

should ollow the tenants corporate standards or use

the LAX interior waynding ont.

Materials

The corporate signature shall be reproduced as

screened or vinyl graphics applied to the housing

surace o the kiosk.

Quantity

One (1) sign per kiosk.

8/4/2019 57675754 LAX Standards

28/71




Figure 3e: Queue line tape and stanchion signs.


Terminal - Interior | Queue

Passengers

Only

Zone

A

4-6"

max ht

18"

14"

7'-6"

max ht

2

1

Description

Queue area signs are permissible on queue ribbons

and stanchion toppers in tenant leased spaces only.

Location

1 Stanchion top signs shall be ramed and rmly

attached to the stanchion post top only. No queue

area signs shall be permitted onor attached

toother suraces including foors, walls, structural

supports, columns, and ceilings.

2 Copy on queue ribbons shall be printed graphics

o one piece with the tape material. No signs shall be

attached to the ribbon.

Sign Size

1 Maximum rame dimensions are 14 inches wide

by 18 inches high.

2 The corporate signature height shall t

comortably on the ribbon.

Image & Text Size

1 The corporate signature and accompanying text


not exceed a maximum capital height o 6 inches. A

minimum 1-inch edge margin shall be maintained

around the copy.

2 The signature height shall not exceed a minimum

1/4-inch edge margin above and below the copy.

Colors & Fonts

1 2 The image and text o the corporate

signature colors are acceptable. Fonts should ollow

the tenants corporate standards or use the LAX

interior waynding ont.

Materials

1 Standard rame as provided by manuacturer.

2 Screened copy on ribbon abric.

Quantity

1 Maximum two (2) stanchion top signs at each

queue position; one (1) per boarding zone lane.

2 One (1) signature per every 3 eet o ribbon.

8/4/2019 57675754 LAX Standards

29/71



Tenant Signage StandardsTerminal - Interior | Countertop


14"

12"

Description

Display signs consisting o the tenants corporate

signature and accompanying inormational text shall

be permitted on ticket counters.

Location

Display signs shall be displayed on service counters

only. No display signs shall be permitted onor

attached toother suraces including ticket kiosks,

conveyor systems, housings, stanchions or structures.

Sign Size

Maximum dimensions are 12 inches by 14 inches.

Image & Text Size

The corporate signature and accompanying text


not exceed a maximum capital height o 6 inches. A

minimum 1-inch edge margin shall be maintained

around the copy.

Colors & Fonts

The image and text o the corporate signature

colors are acceptable. Fonts should ollow the

tenants corporate standards or use the LAX interior

waynding ont.

Materials

Acceptable material is acrylic with screened or cut

vinyl copy, acrylic rame or window with metal or

plastic support.

Quantity

One (1) sign is permitted or each 15 eet o

counter length.

Figure 3: Countertop inormational sign.

8/4/2019 57675754 LAX Standards

30/71



Tenant Signage StandardsTerminal - Interior | Luggage Size Check


Figure 3g: Standard luggage sizers minimize clutter in the terminal.

3'-0"

max ht

Carry-OnLuggage Sizer

Description

Inormational signs consisting o the tenants

corporate signature and accompanying text shall be

permitted on luggage size check apparatus.

Location

The sign copy will be positioned on the customer

sides o the device.

Sign Size

The sign size shall not exceed 75% o the total

rontage area o the apparatus. The luggage size

check apparatus height shall not be greater than

3 eet.

Image & Text Size

Copy shall be limited to a corporate signature and

minimal instructional text. No promotional or

advertising copy or graphics shall be allowed. The

combined letter area and logo height shall not exceed

6 inches. A minimum 1-inch edge margin shall be

maintained around the copy.

Colors & Fonts




waynding ont.

Materials

Acceptable material is metal or acrylic with screened

or cut vinyl copy.

Quantity

One (1) sign is permitted or each side o the device.

8/4/2019 57675754 LAX Standards

31/71



Tenant Signage StandardsTerminal - Interior | Boarding Wall


1 2 See Figure 3h.

Description

Tenant signature and inormational signs are

permitted in the boarding area. These signs will

be reviewed by LAWA on a case-by-case basis.

All signs shall be o an inormative nature designed

to meet the needs o the traveling public. No

promotional or advertising copy or graphics will be

allowed.

1 I fight schedule monitors are provided by

LAWA, electronic message displays shall be

controlled remotely rom each gate podium by

the airline agents.

2 Tenant corporate signature and inormational

signs may be attached to the structure surrounding

the monitor.

Location

Signs are permitted within the tenants own boarding

area only. The preerred location is vertically

centered on the wall directly behind the counter.

Sign Size

1 Determined by the monitor size.

2 The total sign size shall not exceed 75% o the

total rontage length o the counter.

Image & Text Size

1 Image and text sizes shall be determined by the

monitors capabilities.

2 Copy may consist o a corporate signature and

fight inormation only. Copy shall t comortably

within the display area and may not encroach a

minimum 2-inch edge margin.

Colors & Fonts

1 The image and text o the corporate signature

colors are acceptable.

2 Inormational text should ollow the tenants

corporate ont standards or use the LAWA approved

interior waynding ont. Inormational text shall

appear in black or white only.

Materials

1 Determined by the monitors display system.

2 Fixed signage will be permitted instead o the

video monitor, as long as the signage does not extend

beyond the intended video monitor display area.

A xed sign shall be either screened or vinyl

copy applied to an acrylic panel or other existing

substrate.

Quantity

1 2 One (1) display sign per service position.

8/4/2019 57675754 LAX Standards

32/71




10 1 / O NT 10 0 1: 10 AM

10 2 / PMD 12 0 2: 20 AM

10 3 / VN Y 14 0 3: 30 AM

FLIGHT GATE DEPARTS

1 01 / O NT 1 0 0 1: 10 AM

1 02 / P MD 1 2 0 2: 20 A M

1 03 / V NY 1 4 0 3: 30 AM

F LIG HT GAT E DE PA RT S

52

1

Figure 3h: Types o fight inormational signs in the boarding area include static panels with changeable message strips

and electronic display monitors.

Terminal - Interior | Boarding Wall


8/4/2019 57675754 LAX Standards

33/71



Tenant Signage StandardsTerminal - Interior | Baggage Claim


Description


permitted in the baggage claim area.

1 Remotely controlled electronic LED displays will

provide airline, fight number, and points o origin

inormation. This signage may also include audio

messaging capability to announce the displayed

inormation.

2 Display signs consisting o the tenants corporate

signature and accompanying inormational text only

shall be permitted on baggage carousel islands.

Location

Signage in the baggage claim area is limited to the

LED monitors and the top o the carousel island.

No signs shall be attached to foors, walls, windows,

conveyor systems, housings, reestanding stanchions

or structures.

Sign Size

1 Message size is determined by the LED monitor.

2 The display sign shall not exceed 3 eet by 2 eet

in size. A double-sided panel or a our-sided cube

will be allowed.

Image & Text Size

1 Image and text sizes shall be determined by the

monitors capabilities.

2 Copy shall consist o a corporate signature and

minimal inormational text only. No promotional or

advertising copy or graphics will be allowed. Copy

shall t comortably within the display area and may

not encroach a minimum 2-inch edge margin.

Colors & Fonts




waynding ont.

Materials

1 Determined by the monitors display system.

2 Acceptable material is metal or acrylic with

screened or applied cut vinyl copy.

Quantity

1 One (1) monitor per baggage carousel area.

2 One (1) sign per baggage carousel.

1 2 See Figure 3i.

8/4/2019 57675754 LAX Standards

34/71




BaggageService Office

If unattended please see

agent at ticket counter or

call 1.800.000.LAWA

Please

present your

baggage

claim ticket.

Thank you.

1'-6"

max ht

Terminal - Interior | Baggage Claim


Baggage Claim

Irregular sized items

may be picked up at theBaggage Claim Office

2'-0"

3'-0"2

1

Figure 3i: Two standardized sign types help to minimize disorder in the baggage claim area.

Figure 3j: An inormational sign on the exterior window 1 and a corporate signature sign behind the service counter 2 inside the baggage service oce.

1

2

1 2

8/4/2019 57675754 LAX Standards

35/71



Tenant Signage StandardsTerminal - Interior | Baggage Service Ofce


1 2 See Figure 3j.

Description


permitted in the baggage service oce area. Signs

within the oce space shall comply with the

requirements and aesthetics o these Standards.

Location

1 An inormational oce sign may be located in

the window adjacent to the entrance door.

2 A corporate signature sign may be attached to

the wall directly behind the service counter.

No signs shall be attached to the exterior side o the

window or adjacent suraces.

Sign Size

1 The window sign must t within a single area

not to exceed 2 eet wide by 2 eet high.

2 The corporate signature sign shall not exceed

75% o the length o the counter and a maximum

height o 18 inches.

Image & Text Size

1 Copy shall be limited to the tenants corporate

signature and brie descriptive text such as Baggage

Services, phone numbers, hours, etc.

2 The oce interior sign shall be limited to the

corporate signature and brie descriptive text such as

Baggage Services.

Colors & Fonts


are acceptable. Inormational text on the oce

window shall be black or white only. Fonts should

ollow the tenants corporate standards or use the

LAX interior waynding ont.

Materials

1 The axed window sign shall be either screened

or vinyl graphics applied to the oce interior side o

the glass surace.

2 Corporate signature sign shall be an acrylic panel

or dimensional copy.

Quantity

1 One (1) inormational window sign per oce.

2 One (1) corporate signature sign per oce.

8/4/2019 57675754 LAX Standards

36/71





Terminal - Interior | Baggage Service Ofce - Alliance

Description

An airline alliance signature sign panel listing airlines

that have an operating permit and current base with

LAWA is permitted in the baggage service oce area.

Location

An airline alliance sign panel shall be installed to

the side o the primary tenant identity sign on the

wall directly behind the baggage service counter.

No alliance sign shall be displayed apart or separate

rom the primary tenant sign.

Sign Size

The airline alliance panel shall be a maximum height

o 18 inches and not more than 1 inch thick.

Image & Text Size





Colors & Fonts


acceptable. The nish must match or exceed LAWA

signage standards.

Materials

Acceptable materials are painted aluminum or acrylic

with screened or vinyl graphics. Internal illumination

o alliance signs is not permitted.

Quantity

One (1) airline alliance panel sign per oce.

Figure 3q: Airline alliance panel sign behind the service counter inside the primary tenants baggage service oce.

18" max

8/4/2019 57675754 LAX Standards

37/71



Tenant Signage StandardsTerminal - Interior | Inormation Display System


Description

A tenant corporate signature may be axed to the

structure surrounding an inormation display system.

Location

The corporate signature shall be vertically and

horizontally centered on the monitor housing above

the video monitor. No signs are permitted on the

sides o the monitor or its cabinet.

Sign Size

The sign size shall not exceed 75% o the total area

above the monitor.

Image & Text Size

The combined letter area and logo height shall not

exceed 6 inches. A minimum 2-inch edge margin

shall be maintained within the display area.

Colors & Fonts

The image and text o the corporate signature shall

contrast with the monitor cabinet color. Fonts should

ollow the tenants corporate standards or use the

LAX interior waynding ont.

Materials

The corporate signature shall be reproduced as

screened or vinyl graphics applied to the housing

surace o the monitor.

Quantity

One (1) sign per display system.

A rr iv al s D ep ar tu re s

2" margin

2" margin6" max ht

Figure 3k: Tenant corporate signature may be placed on the cabinet ace o fight schedule monitors.

8/4/2019 57675754 LAX Standards

38/71



Tenant Signage StandardsTerminal - Interior | Passenger Lounge Directional


Description

Directional signs or tenant passenger lounges may

be requested to LAWA or inclusion on terminal

waynding signs. No other directional signs

reestanding or attachedare permitted.

Location

Directional text and arrow may be included on

terminal waynding signs. Placement o copy and

graphics to be determined by LAWA.

Sign Size

Sign size shall be determined by LAWA.

Image & Text Size

The combined letter and arrow height shall be a

maximum o 4 inches or as determined by LAWA.

Colors & Fonts

The image and text will ollow LAWAs standards or

LAX waynding signage.

Materials

Sign materials will be consistent with LAWAs

standards or LAX waynding signage.

Quantity

As determined by LAWA according to lounge

location, sign space availability and location o

waynding directional signs.

Concessions Baggage

Claim

LAWAirlines

Sky Club

Figure 3l: Directions to tenant passenger lounges may appear on airport directional signs by request to LAWA.

8/4/2019 57675754 LAX Standards

39/71



Tenant Signage StandardsTerminal - Interior | Passenger Lounge Identifcation

Section Title | 3.18

5'-0"

max ht

2'-0"

2'-0"

Figure 3m: Passenger lounge signs include ADA required tactile identication.

Description

Passenger lounge identication signs are permitted at

the entrance to the tenants lounge.

Location

Lounge identication signs will be located on the

entrance door or wall immediately adjacent to it. No

signs are permitted on walkways, windows, corridor

walls, reestanding stanchions or structures.

Sign Size

All signs must t within a single area 2 eet wide by

2 eet high. ADA tactile and Braille copy are

required. Whenever possible this sign shall

incorporate an entry push button or card key.

Image & Text Size

Copy shall be limited to the tenants corporate

signature and brie descriptive text such as

service hours, phone numbers, etc. Copy shall t

comortably within the display area and may not

encroach a minimum 1-inch edge margin.

Colors & Fonts




waynding ont. Inormational text shall be black or

white only.

Materials

Acceptable materials are polished or brushed metal,painted aluminum or acrylic.

Quantity

One (1) sign per entrance.

8/4/2019 57675754 LAX Standards

40/71



Tenant Signage StandardsTerminal - Interior | Ofce Identifcation


Description

Tenant identication may appear on room

identication signs.

Location

A room identication sign is required at each

doorway to tenant leased interior spaces.

Sign Size

The sign size shall not exceed 8 inches by 10 inches.

Image & Text Size

Room identication signs must conorm to all ADA

and local code requirements or copy size and

tactile messages.

Colors & Fonts


acceptable. Inormational text shall be white or

black only and use the onts o the tenants corporate

guidelines or LAX interior waynding ont. Tactile

messages must conorm to ADA requirements.

Materials

Acceptable materials are polished or brushed metal,

painted aluminum or acrylic.

Quantity

One (1) sign per entrance.

10" max

8" max

5'-0"

to center

4"

Figure 3n: Room identication signs which comply to ADA code standards are required by law.

8/4/2019 57675754 LAX Standards

41/71


Ofce &Warehouse

Signs

8/4/2019 57675754 LAX Standards

42/71




1. Architectural elements should be utilized or sign

application when possible, i.e., header, sot,

acia, parapet.

2. Where possible, signage to be positioned at

parapet, but not to extend above or below.

3. All signs must be permanently mounted, using

individual letters only.

4. Individually mounted, internally illuminated

letters are required or master and sub-tenant

signage.

5. Lettering is limited to corporate name or

corporate name and Express, Air Cargo,

Air Freight or Transer provided that they

are registered corporate identities.

6. Where possible, all sign inormation should be

located above roll-up doors.

7. No signage is permitted on bay or roll-up doors.

8. All roll-up doors in bays must be the same color.

9. Bay identication number(s) shall be allowed

over each bay. The maximum height is 9 inches.

10. Signage mounted above a bay must be centered

directly over the bay. Sign width cannot exceed

the width o the bay.

11. When two or more bays are represented by the

same sign, one sign shall be centered between the

two bays, i possible.

12. No temporary attachments shall be permitted.

13. No stenciling shall be permitted.

14. No internally illuminated can signs shall

be permitted.

15. No plaques or painted on numbers; numbers

must be cut out, individually mounted.

16. No back washed, spot lighted, fashing, or

animated signs are permitted.

17. No window signs shall be permitted.

18. No roo signs or signs mounted on top o parapet

shall be permitted.

19. No vertically mounted lettering is permitted.

20. Signage may not violate an architectural eature

or extend beyond a vertical architectural eature

or ascia.

21. No signage on awnings or canopies is permitted.

22. No paper, handmade or hand lettered sign shall

be permitted.

23. I sign is positioned within 3 eet o architectural

elements such as doors or windows, it must be

centered over that element and may not extend

above, below or cover it in any way.

24. Signs shall not exceed the width o any vertical

architectural element, wall, or aade exists.

25. No Parking signs may repeat where necessary,

but must be located individually and may not

overlap or extend on to any other signage or

architectural eature.

Ofce & Warehouse - Exterior | Restrictions

Ofce & Warehouse Signs | 4.1

Exterior Signage

Tenant oce and warehouse buildings under LAWA jurisdiction are subject to the ollowing restrictions.

8/4/2019 57675754 LAX Standards

43/71




Figure 4a:Master Tenant Building

1 Primary master tenant corporate signature

2 Secondary corporate signature with service text

3 Regulatory or inormational sign

LAWAMaster

TenantCargo

Bldg. B

LAWA

Master

Tenant

Office

1

3

2

3

Ofce & Warehouse - Exterior | Tenant Sign Types


LAWAMaster

TenantCargo

Bldg. B

LAWASub

TenantCargo

Bldg. B

Figure 4b:Multiple Tenant Building

1 Primary master tenant corporate signature

2 Secondary corporate signature with service text; master tenant service sign


1

3

2

3

2

Permitted Tenant Signs

Master tenant oce and warehouse buildings may include a corporate signature sign and a regulatory or

inormational sign as needed (Figure 4a). Multiple tenant buildings with a master tenant and one or more

sub-tenants may include a corporate signature sign and a regulatory or inormational sign or each occupant.

(Figure 4b). Reer to the Master Tenant and Sub-Tenant standards on the ollowing pages or details.

Oce Warehouse

Warehouse

8/4/2019 57675754 LAX Standards

44/71




Description

Corporate signature signs and a regulatory or

inormational sign are permitted on tenant oce and

warehouse buildings. These signs must be reviewed

by LAWA on a case-by-case basis.

Location

1 The master tenants corporate signature sign

may be placed on any side o the building. The sign

must align with a vertical or horizontal architectural

eature where possible.

2 The tenants corporate signature may be installed

above a warehouse bay door.

3 A regulatory or inormation sign is permitted as

needed or building operations.

Sign Size

Reer to the master tenant building size diagrams in

this section or visual reerence.

1 Reer to the Master Tenant Signature Sign Size

chart in these Standards to determine primary

corporate sign size. (Figure 4e)

2 Tenant corporate signature signs above a bay

door may not exceed 8 eet in width or the width o

the bay door, whichever dimension is less. (Figure 4e)

3 Tenant inormational signs must not exceed 8

square eet in area.

Image & Text Size

1 2 Reer to the Master Tenant Signature Sign

Sizes chart in these Standards. (Figure 4e)

3 Maximum capital height or regulatory or

inormation signs is 6 inches. No corporate signature

is allowed on this sign. (Figure 4e)

Colors & Fonts



tenants corporate standards or use the LAX exterior

waynding ont.

Materials

1 2 Dimensional copy o abricated aluminum and

acrylic.

3 See the approved materials list and general

restrictions in these Standards.

Quantity

1 2 A maximum o two (2) master tenant signature

signs are permitted on each building. No more than

one (1) per structure side.

3 No more than one (1) per structure is permitted.


Ofce & Warehouse - Exterior | Master Tenant Standards

1 2 3 See Figures 4a, 4b, 4c.

8/4/2019 57675754 LAX Standards

45/71




LAWA

Master

Tenant

Office

LAWA

Master

Tenant

Office

LAWA

Master

Tenant

Office

LAWA

Master

Tenant

Office

16'-0" max

18"max

28" max

25'-0" max

32'-0" max

36" max

48" max

42'-0" max

Ofce & Warehouse - Exterior | Master TenantSignature Sign Sizes

Figure 4c: Building height and width determine the maximum sign size or corporate signatures.

Master Tenant Buildings & Corporate Signature Signs

Building size and tenant status are the basic criteria or establishing the size o corporate signature signs.

These diagrams and the ollowing charts convey maximum sign sizes or buildings occupied by a single tenant.


8/4/2019 57675754 LAX Standards

46/71



Tenant Signage StandardsOfce & Warehouse - Exterior | Sub-Tenant Standards


Description


inormational sign are permitted or sub-tenants on

oce and warehouse buildings. These signs must be

reviewed by LAWA on a case-by-case basis.

Location

1 The master tenants corporate signature sign

may be placed on any side o the building. The sign

must align with a vertical or horizontal architectural

eature where possible.

2 The sub-tenants corporate signature may

be installed at the oce entrance and/or above a

warehouse bay door.



Sign Size

Reer to the master tenant building size diagrams in

this section or visual reerence.

1 Reer to the Master Tenant Signature Sign Sizes



2 Reer to the Sub-Tenant Signature Sign Sizes




square eet in area.

Image & Text Size

1

Reer to the Master Tenant Signature Sign Sizes

chart in this section. (Figure 4e)

2 Reer to the Sub-Tenant Signature Sign Sizes

chart in this section. (Figure 4e)



is allowed on this sign.

Colors & Fonts


are acceptable. Fonts should ollow the tenants

corporate standards or use the LAX waynding ont,

Franklin Gothic Demi.

Materials


acrylic.



Quantity

1 A maximum o two (2) master tenant signature



2 A maximum o two (2) sub-tenant signature signs

are permitted on each building. No more than one

(1) per structure side.

3 No more than one (1) inormational sign per

tenant is permitted on each structure side.

1 2 3 See Figures 4a, 4b, 4d.

8/4/2019 57675754 LAX Standards

47/71




LAWA

Sub-

Tenant

Office

LAWA

Sub-

Tenant

Office

LAWA

Sub-

Tenant

Office

LAWA

Sub-

Tenant

Office

8'-0" max9" max 12" max 9'-0" max

10'-0" max15" max 18" max 12'-0" max

Figure 4d: Building height and width determine the maximum sign size or corporate signatures.

Multiple Tenant Buildings & Corporate Signature Signs

Building size and tenant status are the basic criteria or establishing the size o corporate signature signs.

These diagrams and the ollowing charts convey maximum sign sizes or buildings with more than one tenant.

Ofce & Warehouse - Exterior | Sub-TenantSignature Sign Sizes


8/4/2019 57675754 LAX Standards

48/71



Tenant Signage StandardsOfce & Warehouse - Exterior | Signature Sign Sizes

Tenant Status & Corporate Signature Signs

Corporate signature sign dimensions are determined by building height/width measurements and tenant status.

The primary corporate signature sign may never appear longer than one-third (1/3) the length o the building

rontage or taller than the established maximum signature height indicated.

LAWA stipulations or master tenant and sub-tenant signs or oce and warehouse buildings are indicated in

the ollowing charts.


Figure 4e: Building size to corporate signature sign size specications.

MASTER TENANT SIGNATURE SIGN SIZES

BUILDING

HEIGHT

MAXIMUM

SIGN

WIDTH

MAXIMUM

SIGNATURE

HEIGHT

12 stories

(022 eet)

1/3 o building

rontage or

16 eet

i structure

width exceeds

48 eet

18 inches

23 stories

(2235 eet)

1/3 o building

rontage or

25 eet

i structure

width exceeds

75 eet

28 inches

4+ stories

(48+ eet)

1/3 o building

rontage or

42 eet

i structured

width exceeds

126 eet

48 inches

SUB-TENANT SIGNATURE SIGN SIZES

BUILDING

HEIGHT

MAXIMUM

SIGN

WIDTH

MAXIMUM

SIGNATURE

HEIGHT

12 stories

(022 eet)

8 eet 9 inches

23 stories

(2235 eet)

9 eet 12 inches

34 stories

(3548 eet)

10 eet 15 inches

4+ stories

(48+ eet)

12 eet 18 inches

34 stories

(3548 eet)

1/3 o building

rontage or

32 eet

i structure

width exceeds

96 eet

36 inches

8/4/2019 57675754 LAX Standards

49/71


Hangar &Service Building

Signs

8/4/2019 57675754 LAX Standards

50/71


Hangar & Service Buildings - Exterior | Restrictions

Hangar & Service Buildings Signs | 5.1

1. Architectural elements should be utilized or sign

application when possible, i.e., header, sot,

acia, parapet.

2. Where possible, signage to be positioned at

parapet, but not to extend above or below.

3. All signs must be permanently mounted, using

individual letters only.

4. Individually mounted, internally illuminated

letters are required or master and sub-tenant

signage.

5. Lettering is limited to corporate name or

corporate name and Express, Air Cargo,

Air Freight or Transer provided that they

are registered corporate identities.

6. Where possible, all sign inormation should be

located above roll-up doors.

7. No signage is permitted on bay or roll-up doors.

8. All roll-up doors in bays must be the same color.

9. Bay identication number(s) shall be allowed

over each bay. The maximum height is 9 inches.

10. Signage mounted above a bay must be centered

directly over the bay. Sign width cannot exceed

the width o the bay.

11. When two or more bays are represented by the

same sign, one sign shall be centered between the

two bays, i possible.

12. No temporary attachments shall be permitted.

13. No stenciling shall be permitted.

14. No internally illuminated can signs shall

be permitted.

15. No plaques or painted on numbers; numbers

must be cut out, individually mounted.

16. No back washed, spot lighted, fashing, or

animated signs are permitted.

17. No window signs shall be permitted.

18. No roo signs or signs mounted on top o parapet

shall be permitted.

19. No vertically mounted lettering is permitted.

20. Signage may not violate an architectural eature

or extend beyond a vertical architectural eature

or ascia.

21. No signage on awnings or canopies is permitted.

22. No paper, handmade or hand lettered sign shall

be permitted.

23. I sign is positioned within 3 eet o architectural

elements such as doors or windows, it must be

centered over that element and may not extend

above, below or cover it in any way.

24. Signs shall not exceed the width o any vertical

architectural element, wall, or aade exists.

25. No Parking signs may repeat where necessary,

but must be located individually and may not

overlap or extend on to any other signage or

architectural eature.



Exterior Signage

Hangars and service buildings under LAWA jurisdiction are subject to the ollowing restrictions.

8/4/2019 57675754 LAX Standards

51/71





Hangar & Service Buildings - Exterior | Master Tenant

Description


inormational sign are permitted on tenant hangars

and service buildings. These signs will be reviewed

by LAWA on a case-by-case basis.

Location

1 The master tenants primary corporate signature

sign may be placed on any side o the building.

The sign must align with a vertical or horizontal

architectural eature wherever possible.



Sign Size

Reer to the master tenant Building Sizes page in this

section or visual reerence.

1 Reer to the Master Tenant Sign Types diagrams

and Master Tenant Signature Sign Sizes chart in

this section.


square eet in area.

Image & Text Size

1 Reer to the Master Tenant Sign Types diagrams

and Master Tenant Signature Sign Sizes chart in

this section.




Colors & Fonts


are acceptable. Fonts should ollow the tenants

corporate standards or use the LAX waynding ont,

Franklin Gothic Demi.

Materials

1 Dimensional copy o abricated aluminum and

acrylic.

2 See approved materials list and general

restrictions.

Quantity





structure side is permitted.

1 2 See Figures 5a-d.

8/4/2019 57675754 LAX Standards

52/71



Tenant Signage StandardsHangar & Service Buildings - Exterior | Master Tenant

Sign Types

LAWA Master Tenant

Hanger/Service Building

Informational Sign

Max Size: 8 sq ft

2'-0" max

16'-0" max

Master Tenant Structures & Corporate Signature Signs

Structure size and tenant status are the basic criteria or establishing the size o corporate signature signs.

These diagrams and the ollowing charts convey maximum sign sizes or buildings occupied by a single tenant.


Figure 5a:Master Tenant Building

1 Primary master tenant corporate signature or a structure up to 2 stories in height (22 eet)


1

2

LAWA Master Tenant


Informational Sign

Max Size: 8 sq ft

3'-0"max

25'-0" max

Figure 5b:Master Tenant Building



1

2

8/4/2019 57675754 LAX Standards

53/71



Tenant Signage StandardsHangar & Service Buildings - Exterior | Master Tenant

Sign Types


LAWA Master Tenant


Informational Sign

Max Size: 8 sq ft

4'-0" max

32'-0" max

Figure 5c:Master Tenant Building



2

1

8/4/2019 57675754 LAX Standards

54/71




LAWA Master Tenant


Informational Sign

Max Size: 8 sq ft

42'-0" max

5'-0" max

Figure 5d:Master Tenant Building

1 Primary master tenant corporate signature or a structure greater than to 4 stories in height (48+ eet)


Hangar & Service Buildings - Exterior | Master TenantSign Types

1

2


8/4/2019 57675754 LAX Standards

55/71



Tenant Signage StandardsHangar & Service Buildings - Exterior | Sub-Tenant


Description

Sub-tenants are permitted a corporate signature

sign and a regulatory or inormation sign on tenant

hangars and service buildings. These signs must be

reviewed by LAWA on a case-by-case basis.

Location

1 A corporate signature sign may be placed on

any side o the building. The sign must align with a

vertical or horizontal architectural eature wherever

possible.



Sign Size

1 Reer to the Sub-Tenant Sign Types diagrams and

Sub-Tenant Signature Sign Sizes chart in this section.


square eet in area.

Image & Text Size

1 2 Reer to the Sub-Tenant Sign Types diagrams

and Sub-Tenant Signature Sign Sizes chart in this

section.




Colors & Fonts



tenants corporate standards or use the LAX exterior

waynding ont,.

Materials


acrylic.



Quantity




2 A maximum o two (2) sub-tenant signature signs

are permitted on each building. No more than one

(1) per structure side.


tenant is permitted on each structure side.

1 2 See Figures 5e-h.

8/4/2019 57675754 LAX Standards

56/71

8/4/2019 57675754 LAX Standards

57/71




Sign Types

LAWA Sub-Tenant


Informational Sign

Max Size: 8 sq ft

16'-0" max

2'-0" max

Figure 5g:Multiple Tenant Building


2 Secondary corporate signature3 Regulatory or inormational sign


1

3

2

8/4/2019 57675754 LAX Standards

58/71


