Call 13 11 03 to find a stockist | www.hardiewrap.com.au

HardieWrap™ weather barrier is designed to be used in wall & gable applications behind James Hardie®, Scyon™ and other* external cladding products to help protect your building.

It delivers a triple-shield of protection to help against external weather penetration, internal condensation build-up and external heat penetration.

P 2750mm wide for fast installation Wrap walls once, not twice. Up to 50% faster in certain applications compared with 1350mm wide products.

P Non-perforated and highly breathable To allow internal condensation to escape through breathable pores while resisting weather to help prevent frames rotting or rusting.

P Lighter and easier to cut Compared to other foil wall sarking.

P 10% less wastage Compared to 1350mm wide products in certain applications.

P Reflective^ for better insulation The safe-glare reflective^ surface can improve the thermal wall performance by more than R0.3m2K/W**.

P Bushfire compliant Low flammability and suitable for all bushfire areas in accordance with AS 3959 – 2009.

6 reasons why you should choose July 2014

We have done the hard work for you. Get the peace of mind you deserve.

Specifications

Darwin

Brisbane

Townsville

Port Hedland

Broome

Perth

Adelaide Sydney

Melbourne

Hobart

Tropic of Capricorn

For full specifications and more information on warranty, warnings, MSDS, and full data sheets, please visit www.jameshardie.com.au, www.accel.com.au, or Ask James Hardie™ on 13 11 03

^

* Specifier is responsible for confirming the suitability of HardieWrap™ weather barrier in the specific design and climate zone with the selected external cladding product. Refer to cladding manufacturer for more information.

** Compared to standard non-reflective and non-compressible weather barriers; and installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.

^ HardieWrap™ weather barrier has an outward facing low e reflective surface with an emittance value of 0.16 tested in accordance with AS/NZS 4201.5. Please refer to the HardieWrap™ weather barrier datasheet for more information.© 2014 James Hardie Australia Pty Ltd ABN 12 084 635 558 ™ and ® denotes trademarks and registered marks owned by James Hardie Technology Limited.

scan me

Beneath the surface An average household can generate up to 12 litres of internal condensation on a daily basis. Condensation within the wall frame can result in accelerated frame deterioration, mould infestations, sick building syndrome and costly repairs. Using the right weather barrier can help manage condensation and save you future headaches.

How does it work? The unique triple layered material of HardieWrap™ weather barrier has been engineered to meet the demands of the Australian climate. Non-perforated, it features micro-pores to allow breathability without compromising weather resistance, delivering a triple shield of protection to help against external weather penetration, internal condensation build-up and external heat penetration.

Where do you use it?HardieWrap™ weather barrier can be used in wall and gable applications in all Australian climates zoned from 2 through to 8 (shown shaded on map). Similar to most wall wraps, the exception is zone 1 – the hot and humid tropics of Far North Queensland, the Northern Territory and parts of Northern Western Australia*.

Product code 305664 Roll Weight 9kg

Roll Length 30m Roll Coverage 82.5m2

Roll Width 2.75m Duty Light*