By Order of Secured Party

PRO SOUTHSAWMILL

619 Highway 30 East in Booneville, Mississippi 38829

WEBCAST ONLY - NO ONSITE BIDDINGFRIDAY, JUNE 12TH

Real Estate at 10AM CT Equipment at 11AM CT

Inspection: Day Prior to Auction From 9AM-4PM

PUBL

IC A

UCTI

ON

H.E. WILSON Gang Saw

SCHURMAN Kerf Gang Saw System PIONEER MACHINERY & RECKART MACHINE Board Edgers Lumber & Tie & Sorting System

FULGHUM Chip & Wood Waste System

NEW AMERICAN PIONEER MACHINERY Sawmill

Log Cut Off, Debarking & Dispatch System (2) COOPER MACHINE COMPANY End Dogging Scragg Mills

REAL ESTATE512+/- Acres w/Improvements

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

105 Revere Drive, Suite C I Northbrook, IL 60062Phone: 224/927-5320 I Fax: 224/927-5311www.pplauctions.com

2

???

LOG CUT OFF, DEBARKING &

DISPATCH SYSTEM25’ 5-Strand Log Deck Tree Length 50’ Log Trough Conveyor w/110 Box Chain, Swing-Type Cut Off Saw w/72” Slasher Saw & 75-HP Motor, 25’ Outfeed Log Trough w/Indexable Stops, Rotary Log Kicker 2-Way for Further Log Sort to Mill, Reject or Sort for Export, 25’

Log Trough Conveyor Dual Strand w/H-82 Mill Chain under Rotary Log Kicker, BELOIT Ring Debarker (complete rebuilt) w/Infeed & Outfeed, Infeed Log Trough Conveyor into Mill w/(2) Strands of H-82 Chain Bark Hog System - 31” x 32’W Bark Removal Belt under Debarker, Scalp-ing Screen to Remove Rock & Dirt, Infeed Conveyor to Bark Hog, MONT-GOMERY Bark Hog, Bark Stacking Conveyor45’ Hourglass Roll Section - (1) Sec-

tion w/Log Kicker to Sawmill, (1) Section w/(2) Way Log Kickers - (1) to SCRAGG #1, (1) to SCRAGG #2, All Hyd. Kickers w/Hyd. Power Pack

SCRAGG MILL #1COOPER Overhead End Dogging SCRAGG Mill, 3-Strand Log Deck w/3-Arm Crescent Stop & Loader w/(3) Strands of H-78 Steel Plate Decking & Anti-Kickback Section, COOPER Overhead End Dogging SCRAGG Mill,

12’L Capacity, Independent Arbor 48” Inserted Tooth Saws, each w/100-HP Motors, Jockey Saw Grinder Accesso-ries, Slab Drop Out Section & Outfeed Rollcase, Includes MAS PLC Controls w/EZ Series HMI Panel View & Control Console, Insulated Operator’s Control Booth, (4) Camera Monitors, (2) 40’ HD Vibrating Conveyor Sections (under SCRAGG to carry out wood waste), Outfeed Rollcase w/(3) Strand Jump Up Cant Jump Up Transfer to Gang Accumulation Table, Continued Rollcase

LOG CUT OFF, DEBARKING & DISPATCH SYSTEM

COOPER MACHINE COMPANY END DOGGING SCRAGG MILL #1

COOPER MACHINE COMPANY END DOGGING SCRAGG MILL #2

3

w/Stop & Jump Up Section to Dropout Boards to Transfer to Lumber Exit, 5-Strand Transfer Deck from PIONEER Outfeed under SCRAGG #1 Outfeed to 5-Strand Incline Section, 30”W End-wise Belt Conveyor w/Motor & Drive to 4-Strand Lumber Landing Table w/RT Chain & Steel Decking, 5-Strand Radial Back, Unscrambler to RECKART Edger w/81X Chain

SCRAGG MILL #2COOPER End Dogging Scragg Mill w/Turners, Runs 54” Inserted Tooth Saw, 16’L Capacity Independent Saw w/200-HP Motor, 3-Strand Infeed Deck

w/Stop & Load w/Steel Decking & H-78 Chain, Electric Motor & Drive, MAS PLC Controller w/EZ Series HMI Panel View, Deluxe Insulated Operator’s Cab, A/C w/Dual Console Operator’s Chair for all Accessory Equipment for this System, 9-Camera Monitor Station, JOCKEY Saw Grinder, (4) Extra 54” Saw Blades, Outfeed Landing Table, Slab Dropout on Each Side to (Waste Conveyor), Car Pick Coil Balanced Vibrating Conveyor, 40’-38” Bottom 8” Sides Coil Balanced Vibrat-ing Conveyor, 20’ x 24”W Belt Transfer, Rollcase Section to Lumber Exit Includes 4-Strand Jump Up Transfer

PIONEERMACHINERY SAWMILL

NEW AMERICAN PIONEER 3-Head Block Carriage w/Onboard Flippers, All Air Setworks, Track, Rail, Pantograph w/Husk Mount Frame & Off Bear Belt, 58” F8 Inserted Tooth Saws & 200-HP Motor, Jockey Saw Grinder Sawyer’s Cab w/A/C & AMERICAN PIONEER Touch Screen Setworks & AB Panel View Plus 600 Touch Screen, Sawyer Controls, Slab Dump Conveyor & Cant Catcher Section, 40’ Outfeed Roll Section, #2 Outfeed Rolls w/3-Strand Air Jump Up Cant Transfer

Section w/3-Strand Transfer Deck (from outside to reintroduce material) w/Motor & Reduction Drive, Wood Waste System under PIONEER Mill, (3) 40’ Sections of Precision Vibrating Conveyor from Head Saw Area to Outfeed

KERF GANG SAW SYSTEMSCHURMAN 10” x 60” Running 8” Thin-Guided Kerf Gang Saw, Top Arbor, Chrome Knarled Feed Rolls, (2) 300-HP Arbor Motors, Splined Shifting Saw Machine, Position Infeed Table w/Posi-tion Chains, Turners & Air Bag System, Infeed System to Gang from SCRAGG Mill #2, 23’ 4-Strand Transfer Deck

NEW AMERICAN PIONEER MACHINERY SAWMILL

SCHURMAN KERF GANG SAW SYSTEM

4

w/81X Chain w/Return Channel w/Pin Stops, Motor & Drive from Planer Mill & SCRAGG #1, 37’ 4-Strand Transfer Deck w/81X Rooftop Chain w/Return Channels w/Pop Up Pin Stops, Motor & Drive Includes Operator Cab Lined w/Plywood, A/C & Lighting, MAS PLC Controllers w/Dual Console Deluxe Op-erator’s Control Chair, AB Panel View 1240Plus, 60”W Outfeed Gang Landing Rollcase, Wood Waste Removal under Gang Saw, WEBSTER 40’ Heavy Duty Double Paddle Vibrating Conveyor - 40” Bottom, 12” Deep & 48” Overall, 45’ Box-Type Belt Conveyor - 24” Bottom, 8” Sides w/Return Plate Full Length of Conveyor, Saw & Spacers for Thin Kerf Gang

BOARD EDGERSPIONEER Board Edger w/(2) Movable Saws & (2) Laser Line Lights, 18’ Outfeed Tailing Device to Dropout Side Edgings, Apron Plate to Direct Stop w/Hyd. Power Pack, MELLOTT Box-Type Vibrating Conveyor Transfer to Chipper InfeedRECKART 6” x 42” Edger Make 00, S/N 138, Hyd. Setworks, Feed & Laser Line Lights, Operator Control on Sliding Trolley, 75-HP Motor, Onboard Hyd. Power Pack, Overhead Chain Hoist (to assist w/Saw Chaining), Dual Tailing Device - (1) for Board & (1) for Cants,

Apron Plates for Ofalls is Vibrating Table to WEBSTER Vibrating Conveyor w/Dust Dropout Screen

LUMBER & TIE EXIT& SORTING SYSTEM

EXIT #1 LUMBER & TIES80’ Lumber Landing & Accumulation Conveyor w/(4) Stage Board Landing Areas, (4) Strands of H-78 Chain, Sort Section #1 Culls & Rounded Material Transfer to Chipper System, 28’ x 30”W Return Belt Conveyor for Reman Back to RECKART Edger, Radius Back Un-scrambler w/(6) Strands of 81X Welded Bar Chain & (2) Strands of 81X Chain (Single, Tipple Gate w/Live Crossover Chain, Opens Drop Crossties onto Rollcase Tie Sorting Chain), MEL-LOT 4-Strand Sorting Chain w/Return Channels w/H-78 Chain w/(4) Air Stop, MOBARK Stac-Trac Modular Frame w/50’ of TrackEXIT #2 LUMBER & CANTS115’ 4-Strand Lumber Sorting Chain w/H-78 Chain, HD Motor & Drive has Steel Plate Section for Lumber Grading Area, 27’ Lumber Sorting CartsELECTRIC FOR SAWMILL(2) SQUARE D 2000-AMP Main Electrical Entrances w/Breaker

Panels, SQUARE D Enclosed Com-bination Motor Controls for RECKART Edger & SCRAGG #1 & #2 Hydraulics, SQUARE D Enclosed Soft Start MCC for 100-HP SCRAGG Motors #1 & #2, SQUARE D Enclosed Soft Start MCC for 200-HP Head Saw, (2) SQUARE D Enclosed Soft Start MCC for 300-HP SCHURMAN Gang Saw, (1) SQUARE D Enclosed 200-HP Chipper Motor Control, (1) SQUARE D Enclosed 200-HP Hammer Hog Motor, SQUARE D 50-KVA Transformer, LV #1, LV #2, LV #3 110/220 Breaker Boxes, SQUARE D Model 6 Motor Control #2 for Trans-fers Equipment, (2) SQUARE D Motor Controls for SCRAGG #2, SQUARE D (6) MCC #1 for Equipment throughout Sawmill, Brain Center for Main PLC Controls w/Ethernet. Includes Wire from Motor Control to Machine

CHIP & WOODWASTE SYSTEM

FULGHUM 66” HFTD Chipper w/Vibrating Infeed Conveyor & Metal Detector w/200-HP Motor, 8’ x 10’ Chip Sizing & Separation Screen w/Cyclone Collector, Chip Discharge to Belt Conveyor to Auger Conveyor to Transfer to 3-Bay Chip Van Leveling System for up to 48’ Vans, Oversize Chip Return Belt Conveyor w/Gear Mo-

tor Drive, Fines Dropout Belt Conveyor to Auger Conveyor, Concave Belt Incline Conveyor to Dual Bay Dust Van Levelling System for up to 48’ Vans, 200-HP Motor Control w/600-AMP Disconnect for Chipper, PIPER SAW SHOP Chipper Knife Grinder

MISCELLANEOUSCATERPILLAR 320C Excavator, Thumb Bucket AttachmentJOHN DEERE 4630 TractorFARMALL F-1066 TractorREYNOLDS 8CR Pull-Behind Grader BucketFREIGHTLINER Hood • Truck Bed Utility Boxes • 5th Wheel Attachments • Spare Engine Parts • Various Size Spare Tires & Rims • Parts & Electric Motors • Replacement PartsQUINCY Electrasaver 2 40-HP Air Compressor • Air Reserve TanksWILLIAMS Patent Crusher/ PulverizerH.E. WILSON Gang Saw • Large Quantity of Saw Blades & Guides(10) 800’ & 500’ Log Runs w/6” & 4” Aluminum Couple PipeSQUARE D 75 KVA & FEDERAL PACIFIC 45 KVA Transformers2,000-Gallon Off Road Diesel & 1,000-Gallon Fuel TanksShop Support

LUMBER & TIE EXIT & SORTING SYSTEM

NEW AMERICAN PIONEER MACHINERY & RECKART MACHINE BOARD EDGERS

NASHVILLE210 MILES

>

JACKSON220 MILES>

MEMPHIS114 MILES

>

BIRMINGHAM161 MILES >

HUNTSVILLE129 MILES >

ATLANTA307 MILES

>

5

H.E. WILSON Gang Saw JOHN DEERE 4630 Tractor CATERPILLAR 320C Excavator REYNOLDS 8CR Pull-Behind Grader Bucket

FULGHUM CHIP & WOOD WASTE SYSTEM

ELECTRIC FOR SAWMILL

REAL ESTATE FOR SALE – 512+/- ACRES WITH IMPROVEMENTS

512+/- TOTAL ACRES CONSISTING OF A 16.25-ACRE MAIN OFFICE / SERVICE WAREHOUSE PARCEL,43.7- ACRE / WOODYARD PARCEL, AND 28.75-ACRE SAWMILL PARCEL.

TERMS: 8.5% BUYER’S PREMIUM • SUBJECT TO BANK’S CONFIRMATION • $25,000 DEPOSIT FROM SUCCESSFUL BIDDERContact: Kemp Conrad, 901-273-2359 at Cushman & Wakefield

LIMITEDON TIME?

WE ACCEPT PROXY BIDS.

See back coverfor details.

For Informationon Upcoming

Auctions

FOLLOW US ON

Register and be approved for the sale. Call our Office at 513-738-3311

and give us your proxy bid.We bid on your behalf, up to and including the maximum

amount you specify. Your purchase will be obtained atthe lowest bid possible. We will notify you of the selling

price if you’ve won the lot.

LIMITED ON TIME? WE ACCEPT PROXY BIDS.

FIRST CLASS MAILPRESORTED

FIRST CLASS MAIL U.S. POSTAGE

PAID CINCINNATI, OH

PERMIT NO. 5714

COMPLETE SAWMILL OPERATION & REAL ESTATE

Log Cut Off, Debarking & Dispatch System (2) COOPER MACHINE COMPANY End Dogging Scragg Mills

TERMS OF SALE: Copies of Terms of Sale will be posted at the reserve auction. Additional terms may be an-nounced during the auction. We make every effort to accurately describe each item in the auction; however, a mistake may occur. Buyers must take responsibility to thoroughly inspect the items on which they intend to bid. Each item will be sold “As is, where is.” There is absolutely no warranty or guarantee of any kind either written or implied. Occasionally, additional information may come to light regarding any and all items being sold during the auction. When this occurs the new information takes precedence.

REMOVAL & PAYMENT: Machinery removal is the responsibility of the buyer. All equipment must be removed in accordance with the specific auction timeline and terms of sale. See the specific auction web page for details. Anyone (rigger or buyer), using a powered vehicle to remove items must have a certificate of insurance on file with Myron Bowling Auctioneers in the amount of $1,000,000.00. Item removal generally begins at the conclusion of the auction and after payment in full is received by cash, wire transfer, or company check (if approved by the auction company or bank letter of guarantee). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have provided a proper written exemption from your state. SAMPLE BANK LETTER: Dear Sirs, (BANK NAME) irrevocably guarantees payment in full to Myron Bowling Auctioneers by (BUSINESS NAME) drawn on account (NUMBER) up to the amount of $ (DOLLARS) to purchase items at your (AUCTION NAME). This letter of guarantee is valid until (MONTH, DAY, YEAR). Regards, (BANK REPRESENTATIVE, TITLE, BANK NAME).

COMPLETE TERMS & CONDITIONScan be found at myronbowling.com, or call 513/738-3311 if you have questions

TERMS & CONDITIONS

AUCTION LICENSE NUMBERS: Myron C. Bowling - 466 • Myron Bowling Auctioneers, Inc. - 467F

Auction conducted by:MYRON BOWLING AUCTIONEERS, INC.P. O. Box 369, Ross, Ohio 45061

By Order of Secured Party

PRO SOUTHSAWMILL

619 Highway 30 East in Booneville, Mississippi

WEBCAST ONLY - NO ONSITE BIDDINGFRIDAY, JUNE 12TH

Real Estate at 10AM CT Equipment at 11AM CT

Inspection: Day Prior to Auction From 9AM-4PM

Bid Online in Real Time at WEBCAST AUCTION

JOHN DEERE 4630 Tractor REYNOLDS 8CR Pull-Behind Grader Bucket

NEW AMERICAN PIONEER MACHINERY Sawmill

Register: You must register as an online bidder through Bidspotter.com, 24 hours prior to the auction start time to allow sufficient time to be approved. You’ll find the Bidspotter link on the specific auction page on our Website.Deposit: A deposit of 25% of your anticipated purchase or a bank letter of guarantee is required to bid online. Mail deposit check to: Myron Bowling Auctioneers, P.O. Box 369, Ross, Ohio 45061. Call 513/738-3311 for wire instructions. Fax your bank letter of guarantee to 513/738-0221.Approval: Once the registration process has been completed and your deposit received, you will be notified through an automated Bidspotter email, that you are approved to bid.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM

BUYER’S PREMIUM: 18% ONLINE w/bidspotter.comINSPECTION: THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

Myron Bowling513/604-4957

Joe Oliver513/604-4958

Kevin Gamm 513/235-6430

Greg Hengehold513/520-7636

Christopher Lee513/720-1687

Tom Bowling513/738-3311

Thinking about having an auction? Call one of us.

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

105 Revere Drive, Suite C I Northbrook, IL 60062Phone: 224/927-5320 I Fax: 224/927-5311www.pplauctions.com