Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
6311375 - GRIFFON UNI-100® XT TIN WITH PRESSURE LID 1 L EN/DE/SV/DK/NO/FI
UNI-100® XTTHIXOTROPIC, THF-FREE RIGID PVC CEMENT
PRODUCT DESCRIPTIONThixotropic, THF-free rigid PVC cement.
FIELD OF APPLICATIONFor joining pipes, sockets and fittings with interference fit andloose fit (gap filling) in pressure and drainage systems. Suitablefor diameters ≤ 400 mm. Max. 16 bar (PN 16). Maximaltolerances 0.6 mm diametrical clearance / 0.2 mm press fit.Suitable for e.g. pipe systems conforming to EN 1329, 1452,1453, 1455 and ISO 15493 (PVC).
PROPERTIES· THF-free · Thixotropic · Gap filling
CERTIFICATES & STANDARDS
Certificates
ACS: In accordance with the positive lists ofACS (Attestation de Conformité Sanitaire).Certificate Eurofins 19 CLP NY 011.
CE: Adhesive for non-pressure thermoplasticpiping systems in installations for thetransport/disposal/storage of water (EN14680).
CE: Adhesive for thermoplastic piping systemsfor fluids under pressure in installations forthe transport/disposal/storage of water (EN14814).
CE: European Conformity
KIWA-UNI: Adhesive for thermoplastic pipingsystems for fluids under pressure and drinkingwater. Certificate KIP-097532 based on UNIEN 14814 and D.M.174.
KIWA: Adhesives for connections in PVC andPVC/CPE water pipe systems. Approved fordrinking water. Certificate K5067 based onBRL K525.
KOMO: Adhesives for connections in non-plastified PVC interior sewage systems.Certificate K4395 based on BRL 5221.
KTW: Entspricht den Anforderungen der KTW-Leitlinie (Trinkwasser) des Umweltbundesamtes(UBA).
Kitemark: Solvent cement for pressure andnon-pressure thermoplastic pipe systems.Licence KM 87235 (BS 4346/3).
PZH: Hygienic Certificate BK/W/0299/01/2019.
WRAS: Approved for drinking water. WRAScertificate (BS 6920).
Standards
EN 14680: Meets requirements Europeanstandard 14680: Adhesive for non-pressurethermoplastic piping systems.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our productsare applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department isalways at your disposal for any advice needed.
Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes www.griffon.eu 120210502
6311375 - GRIFFON UNI-100® XT TIN WITH PRESSURE LID 1 L EN/DE/SV/DK/NO/FI
UNI-100® XTTHIXOTROPIC, THF-FREE RIGID PVC CEMENT
Standards
EN 14814: Meets requirements Europeanstandard 14814: Adhesive for thermoplasticpiping systems for fluids under pressure.
PREPARATIONWorking Conditions: Do not use in temperatures ≤ +5°C.
APPLICATIONCoverage: Indication of the number of joints per 1 L:
Directions for use: 1. Cut pipes square, chamfer edges and deburr. 2. Cleansurfaces with Griffon Cleaner and Cleaner Cloth. 3. Applyadhesive rapidly and evenly lengthways on both surfaces (pipethickly, socket thinly). 4. Assemble joint immediately. Removeexcess adhesive. Do not load the joint mechanically for the first10 minutes. Close packaging immediately after use.Stains/residue: Remove adhesive stains with Griffon Cleaner andCleaner Cloth.
TECHNICAL SPECIFICATIONS
Chemical base: Solution of PVC in a mixture ofsolvents
Chemicals resistance: The chemical resistance ofadhesive joints depends onthe gap width, drying time,pressure, temperature, type andconcentration of medium. Theadhesive joint generally has thesame chemical resistance asthe material itself. Exceptions tothis are a small number of veryaggressive chemicals such asconcentrated inorganic acids,caustic solutions and strongoxidants.
Colour: Yellow (transparent)
Density approx.: 0.91 g/cm³
Flash point: K1 (<21°C)
Solid matter approx.: 22 %
Viscosity: Thixotropic
Viscosity approx.: 1450 mPa·s
* Curing time may vary depending on a.o. surface, productquantity used, humidity level and ambient temperature.
STORAGE CONDITIONSAt least 12 months in the unopened package and storedbetween +5°C and +25°C. Close the container properly andstore in a dry, cool and frost-free location.Limited shelf life after opening.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our productsare applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department isalways at your disposal for any advice needed.
Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes www.griffon.eu 220210502