www.manitou.com

TELESCOPIC HANDLERS

700514EN_A_0813_MTX14_18.indd 1 28/08/13 11:17

MT-X1440 / MT-X1840

MT-X 1440

14 m / 4 T

MT-X 1840

18 m / 4 T

2

700514EN_A_0813_MTX14_18.indd 2 28/08/13 11:17

MANITOU: AT YOUR SIDEON ANY CONSTRUCTIONSITE

When it comes to all-terrain handling, MANITOUhas been at your side on all your construction sitesfor over 50 years!

These MT-X 1440/1840 telescopic handlers are highperformers: they have an excellent working envelope anda lifting capacity of up to 4 tonnes.

These handlers offer you unique adaptability:- Commonality of design making them easy to use andmaintain

- Wide stabiliser legs for unparalleled lateral and frontalstability

- A choice of transmission: torque converter or hydrostatic- Efficiency: change the attachment within seconds

These trucks are true allies in your quest for productivity andsimplicity.

High performing MANITOU telescopic handlers allow you tocarry out all your construction work safely and efficiently.

3

700514EN_A_0813_MTX14_18.indd 3 28/08/13 11:17

SIMPLICITY

COMMONALITY whatever the model

Spacious and comfortable cabin Ergonomic dashboard

Simplified USAGE and MAINTENANCE

▪ All the information you need: direction of travel, wheel alignment,boom angle, fuel level, hour meter etc.

▪ Stability indicator cutting off aggravating movements. You choosebetween a handling or suspended load mode in order to optimiseyour handling.

Work SIMPLYand SAFELY

▪ Baskets capacity up to 1000 kg with automatic locking of the rear axle.(MT 14/18 ‘A’ Models only).

▪ Automatic Parking Brake next to the hill start assistance button.▪ EASY CONNECT SYSTEM allowing the depressurisation of the hydraulic attachment line

without turning off the engine.

▪ Adjustable continuous flow of hydraulics to the auxiliary services.▪ Tilt lock out facility for enhanced safety.▪ Digicode as standard for security and immobilisation.▪ Radio control (optional).

▪ Attachment function control▪ Extension/retraction control for the boom▪ Forward/backward/neutral movement selector switch

JSM® : everything in the palmof your hand

4

700514EN_A_0813_MTX14_18.indd 4 28/08/13 11:17

MT-X 1440 / 1840

via a large doorand non-slip steps

SAFE AND QUICK ACCESS

IDENTICAL MAINTENANCE whatever the model

▪ Engine, transmission, hydraulics, cab and chassis. All benefitfrom the same design.

▪ Simplified accessibility via the wide opening of the bonnet:save time during maintenance.

PANORAM

ICCABIN: 360° VISIBILITY

Machine MAINTENANCE and DIAGNOSISPeriodic maintenance and diagnosis display onthe multifunction screen on the dashboard.

5

700514EN_A_0813_MTX14_18.indd 5 28/08/13 11:17

PRODUCTIVITY

6

Power 102 HPSTAGE 3A Engine.Torque 400 Nm.4 cylinders.4.4l engine size.

Permanent4 wheel drivewith powerful brakingon both axles.

Transmission adapted to your needsThe torque converter transmission allows the operatorto choose between the travel speed on even groundor engine torque for the engine function on steeperground (4-speed gearbox).

Good ground clearance

Chassis levelling

14 -18 m 4 T1 nominal capacity2 lifting heights

+/-9°

up to 42cm

PERFORMANCE and ADAPTABILITY

6

700514EN_A_0813_MTX14_18.indd 6 28/08/13 11:17

MT-X 1440 / 1840

Three steering modes

4 wheel drive for shortturns in restricted areas

Front wheel drivefor road use

Crab steer for sidewaysapproaches

< 4 m

Good lateral and frontal stability:The excellent stability allows loads to be easily andsafely placed.

Good ground clearance on stabiliserlegs:Whatever the condition of the ground, the levellingof the machine on stabiliser legs is simple.

Hightearoutforce

Turningcircle

7

700514EN_A_0813_MTX14_18.indd 7 28/08/13 11:18

MT-X 1440 / 1840ADAPTABILITY

1 2 3

LOADING

Construction bucket 4 in 1 Bucket(MT-X 1440 only)

Handling bucket

LOAD PLACEMENT

Forks Hook crane jib Crane jib Extendable roof crane jib Winch

ACCESS

Fixed basket 365 kg Extendable basket 1000 kg

OTHERS

Mixer bucket Skip

Your MANITOU truck is a real tool box...Thanks to the MANITOU attachment system, you can easily equip your handlerwith numerous attachments within seconds: forks, buckets, mixer buckets,baskets etc.

...for a multitude of applicationsThe adaptable MANITOU machines meet all your working needs and optimise work time and productivity:

▪ load placement▪ distribution of materials on confined construction sites▪ loading loose material▪ positioning suspended loads▪ lifting people

8

700514EN_A_0813_MTX14_18.indd 8 28/08/13 11:18

MT-X 1440 / 1840APPLICATIONS

9

700514EN_A_0813_MTX14_18.indd 9 28/08/13 11:18

MT-X 1440 / 1840APPLICATIONS

10

700514EN_A_0813_MTX14_18.indd 10 28/08/13 11:18

MT-X 1440 / 1840MANITOU SERVICES

MANITOU maintenance contract2 levels of maintenance adapted to your needs. You are sure of:

▪ equipment always in good working condition▪ a reduction of repair costs as a result of regular servicing▪ authentic standardised services

MANIPLUS extension of guaranteeWith MANIPLUS you can take out an extension of guarantee of 12 or 24 months.

EASY MANAGERA simple and flexible system for fleet management (with or without geolocation) toprovide optimum service from your machines. EASY MANAGER gives you:

▪ real-time materials management▪ simple and easy way of managing your machinery activity and maintenance.▪maximise your asset and safeguard your equipment

MANITOU spare partsUtilising genuine MANITOU spare parts is sure to prolong the best performance capability of your machine.Your MANITOU dealer has access to a stock of 70,000 part numbers, available in 24 hours in Europe (48 hours outside Europe).

Tailor-made finance to makethe best use of your fundsYou can plan the purchase of your forklift with peace of mindby using MANITOU* financing opportunities.

You will have simple solutions adapted to your needs and seasonalrequirements. If you want to make a rapid investment, consider asking usfor a personalised proposal to take your situation into account.* MANITOU Finance solutions are available in certain countries.

▪ Labour

▪ Attendance costs

▪ Labour▪ Attendance

costs

▪ Parts and lubricants

11

700514EN_A_0813_MTX14_18.indd 11 28/08/13 11:18

FT046EN_B_0813_MTX1440.indd

MT-X 1440 MT-X 1440 A

LiftingMax. capacity 4000 kgMax. lifting height 13.53 mMax. outreach 9.46 mBreak-out force with bucket 8000 daN 8800 daNUnladen timeLifting 15.5 secs 15.7 secsLowering 11.6 secs 13.3 secsExtension 16.5 secs 19.2 secsRetraction 11.9 secs 14.8 secsCrowd 4 secsDump 4 secsTyres 400/80-24BrakingService brake oil immersed multi-disc braking on front/rear axlesParking brake automatic negative handbrakeEngine PERKINS - STAGE 3AType 1104D-44TACubic capacity 4400 cm3

Power 101 HP/74.5 kWMax. torque 400 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 8250 daNTransmission torque converterReversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4Max. travel speed(may vary according to applicable regulations)

25 kph or 35 kph

Steering mode 4 wheel steer - 3 steering modes

Controls JSM® Joystick multi - function

load limiter cut off system - EN15000 normHydraulicsPump gear type with flow splitter - 170 l/min - 270 barCapacitiesHydraulic oil 175 lFuel 140 lUnladen weight (with forks) 11115 kg 11755 kgDimensions1. Front wheel centre to carriage 1.90 m2. Wheelbase 3.07 m3. Rear wheel centre to rear face 1.16 m4. Overall length to carriage 6.13 m5. Ground clearance 0.37 m6. Overall width of cab 0.89 m7. Inside tyre width 1.96 m8. Overall width 2.35 m9. Overall width (stabilizers lowered) 3.79 m10. Overall height 2.45 mStandard forks (length x width x thickness) 1200 x 125 x 50 mmTurning radius (over tyres) 3.97 mFrame levelling +/- 9°Carriage rotation (crowd/dump) 12°/114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm

FT046EN_B_0813_MTX1440.indd

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Machine on tyres with forks Machine on stabilizers with forks

Rough terrain load chartstandard EN1459 B

Machine on stabilizers with platform(MT-X 1440 A versions)

0.5m

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

40°

30°

20°

10°

0°

-6.2°

12.3

0m10 9 8 7 6 5 4 3 2 1

8.80 6.70 5.10 3.60 2.409.46 7.75 5.85 4.25 3.10 1.91

60°50° 62°600KG

400KG

300KG

900KG

1200KG

1500KG

2000KG

2500KG

3000KG

4000KG

0.5m

60°50° 70°71.3°

13.5340°

30°

20°

10°

0°-1.2°

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1 0m10 9 8 7 6 5 4 3 2 19.38 6.20 5.10 1.86

1500KG

2000KG

2500KG

3000KG 4000KG

kg + =1000kg

EN 280

14

15

16

1312

1110

9876

5

43

2

10

-18 7 6 5 4 3 2 1 0 -1 -2 -3 -49101112

50°

0°

10°

20°

30°

40°

72°60°

70°

15.40m13.40m

6.18m

kg + =250kg

kg + =365kg

kg + =700kg

13

700514EN_A_0813_MTX14_18.indd 13 28/08/13 11:18

FT047EN_B_0813_MTX1840.indd

MT-X 1840 MT-X 1840 A

LiftingMax. capacity 4000 kgMax. lifting height 17.55 mMax. outreach 13.08 mBreak-out force with bucket 7500 daN 8400 daNUnladen timeLifting 17.3 secs 18.0 secsLowering 12.7 secs 14.4 secsExtension 16.1 secs 17.9 secsRetraction 15.6 secs 16.5 secsCrowd 5 secsDump 4 secsTyres 440/80-24BrakingService brake oil immersed multi-disc braking on front/rear axlesParking brake automatic negative handbrakeEngine PERKINS - STAGE 3AType 1104D-44TACubic capacity 4400 cm3

Power 101 HP/74.5 kWMax. torque 400 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 10000 daNTransmission torque converterReversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4Max. travel speed(may vary according to applicable regulations)

25 kph or 35 kph

Steering mode 4 wheel steer - 3 steering modes

Controls JSM® Joystick multi - function

load limiter cut off system - EN15000 NormHydraulicsPump gear type with flow splitter - 170 l/min - 270 barCapacitiesHydraulic oil 175 lFuel 140 lUnladen weight (with forks) 11600 kg 12560 kgDimensions1. Front wheel centre to carriage 2.04 m2. Wheelbase 3.07 m3. Rear wheel centre to rear face 1.16 m4. Overall length to carriage 6.27 m5. Ground clearance 0.42 m6. Overall width of cab 0.89 m7. Inside tyre width 1.96 m8. Overall width 2.42 m9. Overall width (stabilizers lowered) 3.79 m10. Overall height 2.45 mStandard forks (length x width x thickness) 1200 x 125 x 50 mmTurning radius (over tyres) 4.01 mFrame levelling +/- 9°Carriage rotation (crowd/dump) 12°/114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm

FT047EN_B_0813_MTX1840.indd

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Machine on tyres with forks Machine on stabilizers with forks

Rough Terrain Load Chartstandard EN1459 B

Machine on stabilizers with platform(MT-X 1840 A versions)

0.5m

50° 60°

40°

30°

20°

10°

0°

-4.64°

12.5013

14

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

6.408.65 3.40 2.054.707.209.60 5.40 2.653.908 7 6 5 4 3 2 1 0m910

2000KG

900KG

600KG

400KG

4000KG

2500KG

3000KG

1600KG

1200KG

0.5m0m10 9 8 7 6 5 4 3 2 111121314

19

17.55 1817161514131211109876543210-1

40°

30°

20°

10°

0°-1.65°

60°50° 70° 75.6°

850KG

1200KG

1600KG

2000KG

2500KG

3000KG 4000KG

13.08 11.40 8.65 6.65 1.949.85 7.45

kg + =700kg

kg + =365kg

kg + =150kg

EN 280

kg + =1000kg141516171819

131211109876543210-1

8 7 6 5 4 3 2 1 0 -1 -2 -3 -491011121314151617

50°

0°

10°

20°

30°

40°

74°

60°70°

19.25m

17.25m

6.50m

12.40

15

700514EN_A_0813_MTX14_18.indd 15 28/08/13 11:18

Your nearest MANITOU dealer:

700514EN_A_0813_MTX14_18.indd

Head office:B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France

Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97www.manitou.com

700514EN_A_0813_MTX14_18.indd 16 28/08/13 11:18