7105284C OPC ML DRUCK - Nordsonemanuals.nordson.com/adhesives/Translated_Manuals/7105978.pdfUser’s...
20
User’s Guide 1 VersaBlue Melters Controls and Indicators 2 Check Actual Values 3 Enter a Password 4 Operation (WITHOUT Password) 5 Operation (Password Level 1) 6 Melter 7105978C 11/10
7105284C OPC ML DRUCK - Nordsonemanuals.nordson.com/adhesives/Translated_Manuals/7105978.pdfUser’s Guide 1 VersaBlue Melters Controls and Indicators Check Actual Values 2 Enter a
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Screen cleaning
A B C D
E F G H
Now you can
Time left: 59 s
50
GRIDRESERVOIR
HOSE1
GUN1HOSE2GUN2
Overview
Screen cleaning
V1
V7
V14
1234
02:00 06:00 06:3012:00 13:00
22:0015:00 15:3019:00 19:30
V8
Set Date/Time
Change language
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
0
406080
100
2020 40 60 80 100 [%]
%
1
2
PUMP1
PUMP2
PUMP1
lean the screen
0 %
%
°C °C
R
Backlight / contrast
T1
V20
M1
M2
M3
Control panel
Screen cleaning
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Confirmation, acceptance of a value
Help text
General information
Return, cancel, or close
To next/previous screen
Backspace, delete
1Controls and Indicators
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
1Controls and Indicators
Increase/decrease value
Page up/down
0
0
Grid
Reservoir
HOSE
GUN
AIRHEA
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Pump speeds / pressures of sensors A, B
2Check Actual Values
SYSTEM READY
1 HOSE1 229 °C
Pressures of sensors C
Actual values of activated temp. channels
Service required
1X2X3X
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
3Enter a Password
220HOSE1
°C °C
1 2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M _
*Password
2.3.
220HOSE1
°C °C
Min.:
7 8 94 5 61 2 3. 0
Max.:
or manually
10 min
1.
4.
Activate password protection
T1
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
gray (off) yellow green
Switching ON/OFF Features
Switching on/off seven-day clock
Switching on/off heaters
Switching on/off all motors (collective enable)
Entering/exiting standby
Color of indication lamp:
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
4Operation (WITHOUT Password)
V1
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Changing Temperature Setpoint
Touch green field (setpoint)
Enter new setpoint
Confirm setpoint
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
220HOSE1
°C °C
5Operation (Password Level 1)
Max.:22
7 8 9
4 5 6
1 2 3
. 0
Min.:
Max.:225
7 8 9
4 5 6
1 2 3
. 0
Min.:
T1
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
A: Manual mode; B: Key-to-line mode
Enter new setpoint
Confirm setpoint
Changing Speed/Pressure Setpoint, Max. Pump Speed
Touch green field (setpoint)
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
0
406080
100
2020 40 60 80 100 [%]
%
5Operation (Password Level 1)
Max.:2
7 8 9
4 5 6
1 2 3
. 0
Min.:
1
2
PUMP1
PUMP2
Max.:25
7 8 9
4 5 6
1 2 3
. 0
Min.:
A B
3M1M
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Enable motors
Switch on motor(s)
Motor running
Key Switch On/Off Motor (Individual Enable)
Pupitre
Control panel
Bedienfeld
Quadro comandi
Panel de mando
Bedienfeld UND Standard I/O
Control panelAND Standard I/O
Pupitre ET E/S standard
Quadro comandi E I/O standard
Panel de mando Y E/S estándar
M2
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
5Operation (Password Level 1)
PUMP1
PUMP2
SYSTEM READY
SYSTEM READY
Control panel Control panelAND Standard I/O
V1
M1
+XS2
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Control panelAND Standard I/O
Control panel
5Operation (Password Level 1)
M2M1
XS 2
XS 2 XS 2
M2M1
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Switching Application Group(s)
gray (off) greenColor of indication lamp:
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
5Operation (Password Level 1)
A B C D
E F G H
: Activated : Deactivated
A
A
Application group activated
Application group deactivated or instandby (depending on configuration)
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
6Melter
1
2
3
4
5
6
7
8
°C,°F
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / PANTONE 301 C / Format / Step Limit: 20.0% Common Density Limit: 1.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 72.0 pt Overprint Black Strokes: yes Limit: 352.43 mm = 999.00 pt Overprint Black Graphics: yes
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.66 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISO Coated RGB Image: Profile: ECI_RGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icc Rendering Intent: Saturation Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Saturation Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Saturation Black Point Compensation: no Turn R=G=B (Tolerance 4.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: no CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no