Design of Concrete Structures - Eurocodes versus British StandardsIntroduction On 20 October 2006, Building and Construction Authority (BCA) issued an advisory note to construction industry personnel stating that BCA would be adopting BS EN version of the Eurocodes and is planning to specify them in the Approved Documents of the Building Control Regulations after the corresponding British Standards are withdrawn.

To prepare local structural engineering practitioners for the adoption of the Eurocodes in the design of reinforced concrete building structures, this 2-day workshop will approach the design of concrete building structures using Eurocodes in a comparison with BS 8110, which has been a familiar code of practice in Singapore. The workshop will contain lectures as well as hands-on tutorial sessions to provide participants with practical design experience.

This workshop is jointly organised by BCA Academy and Protective Technology Research Centre of Nanyang Technological University.

ObjectivesAfter attending the workshop, the participants will be able to:t"QQSFDJBUFUIFEFTJHOBQQSPBDICBTFEPOUIF&VSPDPEFTt"QQSFDJBUFUIFFTTFOUJBMEJGGFSFODFTCFUXFFO&VSPDPEF&$BOE#4JO#BTJTPGTUSVDUVSBMEFTJHOBOEBDUJPOPOTUSVDUVSFT%FTJHOQSPDFEVSFTBOESFTVMUTGPSCFBNTTMBCTBOEDPMVNOT - Detailing rules of Columns, Walls, Beams and Slabs to EC2

Workshop OutlineDAY 1 1. A summary of essential differences between EC2 and BS8110 code 2. Basis of structural design using EN 1990:2002 and EN 1991-1.1:2002 3. Load Combinations to BS EN 1990:2002 & National Annex 4. Selecting suitable structural analysis and suitable elements to conform to EC2 design 5. Treating second order effects and imperfections in EC2 6. Flexural Design of Beams to EC2DAY 2 7. Flexural Design of Slabs to EC2 8. Shear Design of Beams to EC2 9. Punching Shear Design of Slabs to EC2 10. Design of Stocky Columns to EC2 11. Detailing rules of Columns, Walls, Beams and Slabs to EC2

Workshop LeaderPROFESSOR TAN KANG HAI obtained his BSc(Eng) and PhD from the University of Manchester, UK. He is Professor at the School of Civil & Environmental Engineering, Nanyang Technological University (NTU). He is Director of Protective Technology Research Centre (PTRC) at NTU.

Prior to joining NTU, he worked as a graduate engineer in Ove Arup & Partners, UK. He won the UK Institution of Structural Engineering Henry Adams Award in May 1989 for his original research work in structural sandwich panels subjected to lateral loading. This award was based on his PhD work. He is a registered Professional Engineer in Singapore. He has been involved in several re engineering consultancy works including analysis and design of steel structures in clean room facilities, storage racks, A&A works on structural re resistance aspect at Changi Terminal 1 and consultancy to HDB on the upgrading of SECAD computer system to Eurocode for structural concrete. He served as Chairman of a few task force groups on Eurocodes relating to structural re applications. He is currently working with Ministry of Home Affairs and Defence Science and Technology Agency on mitigating progressive collapse of building structures due to blast.

He has written over 100 SCI international journal papers and another 100 international conference articles on structures. His research topics include behaviour and modelling of steel, concrete and composite structures under re conditions, strut and tie modelling of reinforced concrete structures, and progressive collapse resistance and numerical simulations of structures subjected to extreme loading conditions.

BCA ACADEMY 200 Braddell Road Singapore 579700 Tel: 6248 9999 Fax: 6258 0558 www.bcaa.edu.sg

2015 Copyr igh t o f Bu i ld ing and Cons t ruc t ion Author i t y. A l l r i gh ts reser ved .

DETAILS

UI3VO.BZ 2015

Time: 9.00am to 5.30pm (Registration starts at 8.30am)Venue: BCA AcademyFee (inclusive of GST): S$600.00 Course materials, refreshments and lunches will be provided.

CPD POINTS

PEB: 1%6TIES-ACES (RE & RTO): 456T

TARGET AUDIENCE t4USVDUVSBM1SBDUJDJOH&OHJOFFSTt%FTJHO$POTVMUBOUTt1SFDBTU$PODSFUF%FTJHOFSTt3FTJEFOU&OHJOFFSTt3FTJEFOU5FDIOJDBM0GmDFSTt$PODSFUF4QFDJBMJTUTt"DBEFNJB

2-Day Workshop on

2-Day Workshop on Design of Concrete Structures - Eurocodes versus British Standards

Event Code: 78015

Course Date: ____________________

Time: 9.00am 5.30pm

Venue: BCA Academy

Fee (incl of GST): S$600.00

REGISTRATION FORM

78015.1.00

For Ofcial Use

Application No.:

Ofcial Receipt No.:

Processing Ofcer:(signature/date)

Cashier:(signature/date)

PART C - PAYMENT (i) Enclosed is Cheque No.:__________________________________ (Cheque should be crossed, marked account payee only and payable to Building and Construction Authority and mailed to

BCA Academy, 200 Braddell Road, Singapore 579700) for S$_______________________ OR

(ii) Deduct from GIRO Account No.: __________________________________________ (Note: Only company cheque or company GIRO will be accepted if the company is applying for funding or subsidy. The GIRO Account Number must be the same bank account number as indicated in the Direct Debit Authorisation form submitted to BCA.)

TERMS AND CONDITIONS 1) The company and individual applicant has read and understood the terms of the brochure (if available) and the application form. 2) The company and individual applicant warrant that the particulars given in the application form are accurate. 3) The Building and Construction Authority (BCA) can disclose to other government agencies any information relating to this application. 4) Payment for the course must be made to BCA before the course commencement date. 5) Any Direct Debit and Direct Credit Authorisation for GIRO applications previously signed and passed to BCA will apply to payments made under this course. 6) BCA reserves the right to accept or reject the application for whatever reason. 7) BCA shall at its discretion allocate a space to the registered applicant, based on availability. 8) BCA reserves the right to amend any details relating to the course, revise the course fees without prior notice, cancel or postpone the course. 9) No deferment JT BMMPXFE 3FRVFTU GPS XJUIESBXBM PS SFQMBDFNFOUNVTU CFNBEF JO XSJUJOH 3FRVFTUT BSF TVCKFDU UP BQQSPWBM CZ #$" t8SJUUFO SFRVFTU GPS SFQMBDFNFOUNVTU SFBDI #$" CFGPSF UIF DPVSTF DPNNFODFNFOU EBUF5IFSF XJMM CF OP BEEJUJPOBM DIBSHFT GPS TVJUBCMF SFQMBDFNFOUt8SJUUFOSFRVFTUGPSXJUIESBXBMUIBUSFBDIFT#$""UMFBTUXFFLTCFGPSFUIFDPVSTFDPNNFODFNFOUEBUFBENJOJTUSBUJPOGFFJTQBZBCMF-FTTUIBOXFFLTCVUNPSFUIBOXPSLJOHEBZTCFGPSFUIFDPVSTFDPNNFODFNFOUEBUFBENJOJTUSBUJPOGFFis payable. - 3 working days or less before the course commencement date: there will be no refund of course fee. 11) The Continuing Professional Development (CPD) points indicated for any course offered by BCA is subject to change and final approval by the relevant professional accreditation bodies. 12) Funding and subsidies offered by BCA or third party organisations for the courses are subject to approval. The company must make the application for funding and subsidies. BCA is not to be held liable and the company agrees to pay BCA the applicable funding amount if funding and subsidies are either granted at a reduced amount, not granted at all or if funding is revoked, for whatever reason. 13) All information, materials, services, intellectual property and other property and rights provided by BCA during the course are provided on an as is basis. BCA makes no warranties of any kind, either express or implied, as to any matter, and all such warranties, including warranties of merchantability and tness for a particular purpose, are expressly disclaimed. 14) The materials supplied to the company and individual applicant for the course (Materials) are for their personal reference only and the company and individual applicant is not supposed to otherwise use the Materials. The company and individual applicant shall defend and indemnify BCA and its ofcers, employees and agents from and against any and all liability, damage, loss or expense (including reasonable attorneys fees and expenses) imposed upon BCA in connection with any claim arising out of the company and individual applicants use of the Materials. PLEASE NOTE: All correspondence and notices addressed to BCA are to be sent to BCA Academy.

PART D - DECLARATION By submitting and signing this application form, the self-sponsored or company-sponsored applicant agree to the terms and conditions below.

Company Stamp (For company-sponsored application only)

(ii) FOR COMPANY-SPONSORED APPLICATION:

Name of authorised personnel: __________________________

Signature : ______________________________________

Date : ______________________________________

(i) FOR SELF-SPONSORED APPLICATION:

Name : ____________________________________

Signature : ____________________________________

Date : ____________________________________

Name (Dr/Mr/Mrs/Ms):(as per NRIC/Passport)

NRIC/FIN/Passport No.: (ll in NRIC/FIN if available)

Birth Date: (DD/MM/YYYY)

Hp No.: Email:

Company Name: Designation:

Residential Address:(for self-sponsored applicant)

Postal Code:

(Residential address as per NRIC for Singaporeans & PRs)

PART A - SELF-SPONSORED APPLICANTS please ll in Part A and C and sign in Part D(i).

Name (Dr/Mr/Mrs/Ms):(as per NRIC/Passport)

NRIC/FIN/Passport No.: (ll in NRIC/FIN if available)

Designation: Birth Date: (DD/MM/YYYY)

Email: Hp No.:

Company Name: Co. UEN No.:

Company Address: Postal Code:

Contact Person:(HR Personnel)

Fax No.: Contact No.:

Designation: Email:

Contact Person: (Finance Personnel)

Fax No.: Contact No.:

Designation: Email:

PART B - COMPANY-SPONSORED APPLICANTS please ll in Part B and C, stamp and sign Part D(ii).

To check the status of your course applications, please log into the Customer Self Service Portal (CSSP) at www.bcaa.edu.sg/self_help_portal/selfhelp/login.aspx. If you need assistance on using the CSSP, please call our customer service hotline: 6248 9999, from 8.30am to 5.00pm, Monday to Friday.

200 Braddell Rd S579700 t Fax: 6258 0558 t Email: bca_academy@bca.gov.sg t www.bcaa.edu.sg