Upload
duonghanh
View
213
Download
0
Embed Size (px)
Citation preview
B-1
Ready Access ClosuresEasily re-accessible and weather resistant for plastic insulated cable splices, terminations, service drops and loading coils. The closuers mount on the cable messenger strand. Each accom-modates up to four 6-pair (145 Type) terminal blocks, has inner shield bond and ground continuity system, and has numbered drop wire entrances on bottom.
M-Series closures are black, weather grade polyethylene thermoplastic construction with stainless steel outer parts and aluminum brackets. The covers may be removed and replaced without disturbing cable entrance/sealed nozzle attachment assemblies. From Emerson Network Power.
Accessories for Ready Access Closures
Part No.For
ClosureStandard Package Weight
180B 100MB 1 6 oz.
183 200MB 1 1 lb.
184 430Y 1 11 oz.
Hanger Brackets
*The suffix “Y” indicates one end is furnished with a branch nozzle. Branch nozzle kits may also be ordered separately—see below.
Part No.For
ClosureStandard Package Weight
170 100MB 1 6 oz.
171 100MC 1 6 oz.
173.1 200MB 1 1 lb.
174 430Y 1 8 oz.
“Y” Branch Kits
Part No.For
ClosureStandard Package Weight
P10318 100MB 1 1 oz.
P10709 200MB 1 1 oz.
Messenger Insulators
Part No.* For Cables Cable O.D. Range (in) Length Width HeightStd. Pkg.
Weight (lbs/each)
100MB Lashed or Figure-8 Straight nozzles .4 to 1.2 14 2.5 4.3 1 2.5
100MBY Lashed or Figure-8 Straight nozzles .4 to 1.2 and branch nozzles .4 to .8 14 2.5 4.3 1 2.5
200MB Lashed or Figure-8 Straight nozzles 1.2 to 2.2 16.7 3.5 6.5 1 4.5
200MBY Lashed or Figure-8 Straight nozzles 1.2 to 2.2 and branch nozzles .4 to 1.6 16.7 3.5 6.5 1 4.5
100MC is the same size and design as 100MB, with a special strand bonding clamp that pierces through the messenger jacket to make electrical grounding contact with the galvanized steel messenger strand.
100MC Figure-8 only Straight nozzles .4 to 1.2 14 2.5 4.3 1 2.5
430Y is the largest closure, accommodating cables up to 3" in diameter.
430Y Lashed or Figure-8 Straight nozzles 2 to 3 and branch nozzles 1.1 to 2.2 24 6.2 10 1 13.5
500MB is the same as 100MB, with messenger clamps for clamping solid galvanized steel support wires used on figure-8 distribution wires.
500MB
Figure-8 dist. wire with solid messenger .72" to .148" dia.
Straight nozzles, .4 to 1.2 14 2.5 4.3 1 2
Internal Space (in)
200 MBY Branch Splice
100MB Straight Splice
Hanger Bracket 180B"Y" Branch Kit 170 Messenger Insulator P10318
Closures & Splicing
[email protected] 800-238-7514
B-2
Re-Enterable Dome Closure KitWith pull and shrink tubing (PST) for fast, rugged splice protection with easy reentry.
An economical method of protecting butt splices for pedestal, hand hole or pole mount applications. From 3M.
The splice is enclosed in a split polypropylene dome clamped together with a steel latch and sealed with an O-ring. An expanded ethylene propylene rubber tube (PST) is slipped over the base of the enclosure and onto a gel sealing
collar. Pulling a plastic rip cord on the PST allows it to shrink the minimum outside diameter necessary to form a tight seal. The flexible tubing conforms to the shape of the collar, sealing out both air and water.
FeaturesUnique latching system to secure dome to the sealed baseGel end sealRetrofits existing PST
BenefitsEasy reentry, no entry kit, seal undisturbed at entry, no tools needed to reenterAir-tight seal over multiple diameters and configurationsMultiple applications
Kit components include closure assembly, dome, base, O-ring, latch, gel end seal, ground wires, PST sheath scuff and desiccant bag.
Companion products needed: Scotch 88T 1-1/2" vinyl tapeScotch rubber tape 130C LR3M Scotchlok™ shield bond connectors 4460 series3M Scotchlok™ UR2 or 3M MS2 splice connectors3M cable ties 6228 15"3M pole-mount bracket FD120
•
••
•
•
•
••••••
Part No.Outside
Dimension (in)Height
(in)Approx. Bundle
Diameter (in)
Minimum Reliable
CAD Pedestal
4604.1 3.8 x 2.8 22.5 2.5 CAD 4
4606.1 5.6 x 3.9 22.5 3.9 CAD 6
4608.1 7 x 5.4 23.5 5.3 CAD 8
Part No.Outside
Dimension (in)Height
(in)Approx. Bundle
Diameter (in)
Minimum Reliable
CAD Pedestal
4604.1 3.8 x 2.8 22.5 2.5 CAD 4
4606.1 5.6 x 3.9 22.5 3.9 CAD 6
4608.1 7 x 5.4 23.5 5.3 CAD 8
SLiC™ Fiber Aerial Closure and TerminalsFor Direct Fiber & Passive Optical Networks (PON)
For strand-mount FTTh in-line, butt or taut sheath appli-cations. Weather-tight with a single piece construction that can be easily installed. Single piece construction permits complete splice access after
placement without removal of the closure or terminal from the cable.
The SLiC fiber terminal features a two-closure-in-one housing design that separates the drop chamber from the splice chamber. This allows the terminal to be accessed for fiber drop terminations without opening the splice chamber.
FeaturesOne-piece construction Integrated terminal design Double wall, molded construction Interlocking ends Terminal chamber accommodates tray or panel boxCouplers can be added easilyAccepts pre-terminated drops
BenefitsEasy installationSeparate splice and drop chambersResists breaking or crackingSleeves extendable in either or both directions to cover sheath damageFlexible for fusion or connector termination
The SLiC 533 can accommodate up to 144 single and and 432 mass fusion splices.
The SLiC 530 has a main cable and splice capacity of 72 fibers, with maximum splice capacity of 24 and 144 for single and mass fusion The drop box has a capacity of 12 single fiber drops and is available with SC/UPC or SC/APC connectors.
The SLiC 733 can accommodate up to 288 single and 864 mass fusion splices.
From 3M. Call for details.
•••••••
••••
•
Closures & Splicing
[email protected] 800-238-7514
B-3
Aerial Closure with Floating Bond
SLIC 2" x 19" SESSLIC 2" x 29" SESSLIC 3" x 33" SESSLIC 5" x 33" SESSLIC 7" x 33" SESSLIC 9" x 36" SES
SLiC™ Aerial Splice Closures with Spiral End Seal (SES)Easy-to-install, single-piece aerial closure. The one-piece design permits complete splice access after place-ment, without removal of the closure or bonding from the cables. Free breathing and suitable for straight, butt and branch splices of non-pressurized com-munications cables. Double-wall molded polyethylene construction will not crack or break in harsh environ-ments. Bottom hinged for easy access and minimum exposure to ultraviolet rays. Interlocking ends expand to meet any size sheath opening without special kits.
No taping, bricking, special labor or sealing collars required. All components are attached to the closure; no parts to lose. From 3M. Call for details.
SLiC™ Aerial Terminal with Spiral End Seal (SES)Distribution terminals and closures contained within a lightweight, double-wall molded plastic housing designed for fixed-count termination of aerial drop wires. End seals are designed to assure proper sizing around the cable sheath. This eliminates the need for drip collars to prohibit water from entering the splice chamber. The 3" terminal comes packaged with three port end seals; the 5" terminal comes with four port end seals. From 3M.
SLiC™ MTC Aerial TerminalsThe 328-MTC and 530-MTC partner's 3M technology with Channell's DSLink™ block designed for high speed, extended access applications.
Accommodates a larger block chamberFacilitates better wire managementSupports more versatile block configurations
Call for details.
•••
Part No. Block Manufacturer Block Type
319MTSES Reltec Binding Post
319MTASES Tyco DT2 (IDC)
328MTSES Reltec Binding Post
328MTASES Tyco DT2 (IDC)
530MTSES Reltec Binding Post
530MTASES Tyco DT2 (IDC)
SLIC 2 x 19 SLIC 2 x 29 SLIC 3 x 33 SLIC 5 x 33 SCIC 7 x 33 SLIC 9 x 36
Max Splice Opening (in) 14 17 21 21 21 25
Max Bundle Diameter (in) 2.2 2.6 3.6 5.6 7.6 9.6
Approximate Cable Range 100 pair 200 pair 400 pair 1,200 pair 2,400 pair 3,600 pair
Pair Count 26 or 24 AWG 26 or 24 AWG 26 or 24 AWG 26 AWG 26 AWG 26 AWG
Spiral End Seal Port Capacity
End Seal Dia. (in) Port #1 .8-1.6 .8-1.6 .8-2.6 1.2-3 1.5-3.8 1.5-3.8
End Seal Dia. (in) Port #2 .5-1 .5-1 .5-1 .8-1.4 1.2-1.8 1.2-1.8
End Seal Dia. (in) Port #3 NA NA .5-1 1.4-2 .5-1.2 .5-1.2
End Seal Dia. (in) Port #4 NA NA NA .5-1.2 1.8-2.4 1.8-2.4
End Seal Dia. (in) Port #5 NA NA NA NA .5-1.2 .5-1.2
Closures & Splicing
[email protected] 800-238-7514
B-4
Armadillo™
from Preformed Line Products
Copper Cable ClosureFeatures new shells made from engineered plastic materials with a permanent gasket sealing system that never requires re-entry kits or cleaning upon re-entry. Features a captive fastener system on the bolt bars, and a universal flange assembly molded into the shell which allows the same shells to be used for pressurized or filled applications. Call for details.
Features and Benefits:Corrosion-resistant, engineered plastic is a less-costly option for standard applicationsMeets Bell System test standards for pressure-tight splice closuresMaintains 10 psi (68kPA), acceptable for most OSP applicationsLight weight reduces shipping costsCompany identification plaque can be attachedUsed in underground, aerial or buried applications
Drillable End PlatesAccommodate a variety of cables, cable sizes and cable configurations with either a two-section or three-sec-tion end plate design.Can be field configured to meet application requirementsLess stock is required, any bond con-
nector can be used, and fixed sheath opening dimen-sions do not depend on bond connector placementAvailable with grounding and air valve inserts for air pressurization, aerial support and grounding through the end plate.
Sealing Washer End PlatesEliminates major tooling costs, field drilling, and does not require exten-sive training.No exposed fastener hardwareGrounding through end plateTorque bar used for positioning
•
•
•
•••
•
•
•
•••
Coyote® Dome ClosuresSpecifically designed for applications where a domed-style configuration is preferred. Features an innovative end plate design with segmented sections that allow for individual access of each cable without disruption to surround-ing cables. A full line of multi-hole grommets ensure the ultimate level of flexibility to meet the demands of
ever-evolving communications networks.Available sizes: 6-1/2" x 17", 6-1/2" x 22" and 9-1/2" x 28"Four entry ports on 6-1/2" closures, seven on 9-1/2", all accepting 1-1/4" cablesFiber organizers and end plates come fully assembledNo special tools or torque wrenches required for installationCollar system allows for quick re-entryTested in accordance to Telcordia GR-771 CORE
From Preformed Line Products. Call for details. Accessories available. See page B-12 for C-Cement. For more COYOTE closures, see pages F-1 and F-2 in the Fiber Optic Supplies section.
4000 Series CabinetsThe 4082, 4084 and 4086 Cabinets are for the MS2™ Splicing System (see page B-10). The 4010 and 4011 Quick-Connect Cabinets are for 900 pair (4082), 1800 pair (4084) or 2700 pair (4086) applications. The cabinets contain an impact insertion tool, pair test plug, spool spindle bracket, mounting frames, binding post log and jumpering instruction label. RUS/RDUP Listed. From 3M. Call for details.
4300 Series CabinetsSuited to stake mount, smaller cable-count cross connect and interconnect applications. Designed as a stand-alone system or to feed/facilitate supporting cabinets in the outside plant. Content can be built to customer specification and contain a wide range of components.Key feature is the stake mount design, which elimi-nates the cost of the pad, along with minimizing the installation labor. RUS/RDUP Listed. From 3M. Call for details.
•
•
••
••
Closures & Splicing
[email protected] 800-238-7514
B-5
Distribution PedestalsControlled Access Design (CAD)The swing-out divider plate gives complete access to cable conductors. It accepts most common block configura-tions and secures into position, concealing the spare bundle. A floating bond braid ensures continuity throughout the closure and positive grounding of all cables. From Emerson Network Power.
Spliced connections using any connector:CAD-4: 150 pairCAD-6: 400 pair
••
CAD-8: 900 pairCAD-12: 3000 pair
••
Number of A-line style terminal blocks a pedestal can accommodate:
Part No. Description Width Depth HeightStandard Package
Weight (lbs/ea.)
CAD4 Distribution 4-7/8 4-7/8 49-9/16 1 24
CAD6 Distribution 6-5/8 6-5/8 50-5/16 1 29
CAD8 Distribution 8-1/4 8-1/4 50-5/16 1 40
CAD12 Splice/Dist. 12-7/8 12-7/8 50-5/16 1 69
Outside Dimensions (in)
Order stakes separately for CADS 4, 6, 8 - see page B-6. Stakes included with CAD 12.
DecalsWhite letters on green background. Adhesive backed pressure-sensitive decals made of vinyl with silk screened print used for identifying equipment closures. From Emerson Network Power.Part No. UPGL* - Letters A-Z, 40 pieces of the same letter, 1" x 1.5"Part No. UPGN* - Numbers 0-9, 40 pieces of the same number, 1" x 1.5"*Add the desired letter or number to each Part No. when ordering. Other decals available. Call for details.
Unprotected, RGT/RPT Protected, RGT/RPT
Part No. 5A 10A 25A 5A 10A 25A
CAD4 4 2 1 2 2 0
CAD6 4 2 1 2 2 1
CAD8 4 2 2 2 2 1
CAD12 4 2 2 2 2 2
Unprotected, RGT/RPT Protected, RGT/RPT
Part No. 5A 10A 25A 5A 10A 25A
CAD4 4 2 1 2 2 0
CAD6 4 2 1 2 2 1
CAD8 4 2 2 2 2 1
CAD12 4 2 2 2 2 2
Metal PedestalsGray-green enameled galvanized steel, square-type pedestals for terminating, tapping, loading and splicing direct earth buried cables and wires. Stake kits and pole mounting kits are individual items and must be ordered separately. See page B-6. From Emerson Network Power.
BD Series, Square type
Application Guidelines
Terminal Blocks (RUS/RDUP Accepted). Requires mounting bracket, see page B-6.
Terminal Blocks (RUS/RDUP Accepted). Requires mounting bracket, see page B-6.
Scotchlite™ Reflective Lettering SystemSelf-sticking adhesiveEach letter/number is 1" x 1-1/2". Kit contains 25 each A-Z, 0-9, blank and dash characters in 36-compartment box, plus application tool. Black letters on safety orange background. Conforms to ANSI Z53.1-1979. From 3M. Part No. 5005
Dimensions (in)
*BD7 is furnished with two stakes.
Part No.RUS/RDUP Designation Width Depth Height
Std. Pkg.
Weight (lbs/ea.)
UPCBD2 BD2/BD2A 4 4 36.5 1 13
UPCBD3 BD3/BD3A 6.75 6.75 37.25 1 21
UPCBD4 BD4/BD4A 8.5 8.5 37.25 1 27
UPCBD5 BD5/BD5A 10.5 10.5 43.25 1 44
UPCBD7 BD7* 23 11.38 48 1 122
Dimensions (in)
*BD7 is furnished with two stakes.
Part No.RUS/RDUP Designation Width Depth Height
Std. Pkg.
Weight (lbs/ea.)
UPCBD2 BD2/BD2A 4 4 36.5 1 13
UPCBD3 BD3/BD3A 6.75 6.75 37.25 1 21
UPCBD4 BD4/BD4A 8.5 8.5 37.25 1 27
UPCBD5 BD5/BD5A 10.5 10.5 43.25 1 44
UPCBD7 BD7* 23 11.38 48 1 122
Part No.6-Pair
Unprotected1-Pair
Unprotected3-Pair
Unprotected
UPCBD2 3 3 3
UPCBD3 3 3 3
UPCBD4 3 3 3
UPCBD5 4 3 5
Part No.6-Pair
Unprotected1-Pair
Unprotected3-Pair
Unprotected
UPCBD2 3 3 3
UPCBD3 3 3 3
UPCBD4 3 3 3
UPCBD5 4 3 5
Part No. RUS/RDUP Accepted Recommended
UPCBD2 3 pair 12 pair
UPCBD3 100 pair 100 pair
UPCBD4 400 pair 400 pair
UPCBD5 600 pair 600 pair
UPCBD7 1800 pair 1800 pair
Part No. RUS/RDUP Accepted Recommended
UPCBD2 3 pair 12 pair
UPCBD3 100 pair 100 pair
UPCBD4 400 pair 400 pair
UPCBD5 600 pair 600 pair
UPCBD7 1800 pair 1800 pair
Closures & Splicing
[email protected] 800-238-7514
B-6
Multi-Purpose ClosuresRound-cornered rectangular design telephone equipment closures accepted for use by RUS/RDUP. Includes splice support bars, mounting plates, bond-ing and grounding bracket, weather stripping, and two mounting stakes. Gray-green. From Emerson Network Power.
BDS Series
Accessories for Pedestals & Closures
Stake Kit42" galvanized steel stake for pedestals. Part No. MS1342
Pole Mounting KitPole mounting kit for BD series pedestals. Part No. PKGPM
Ground Bracket KitGround bracket kit for BD3, BD4, BD5 closures. Part No. GBRREA
Ground LugBronze, electro-tin plate, hex-head, bonding/grounding connector for all closures. Part No. ALP387
Mounting BracketsStand-off bracket for terminal blocks and load-coil mounting; for BD2, BD3, BD4 closures. Part No. SB234
Stand-off bracket for terminal blocks and load-coil mounting; for BD5 closure. Part No. SB5
Pad Mounting Bracket KitPad mounting bracket kit for BDS100. Part No. PADMT100Pad mounting bracket kit for BDS200, BDS300 and BD7. Part No. PADMT200300 RetrolockAny closure that uses a bolt or a bolt and cup security device. Part No. RETROLOCK
Part No. Height Depth Width
BDS100 1000 48 11 16.5
BDS200 2000 48 11.25 23.5
BDS300 3000 50 12.5 28.5
Splices using any connector
Dimensions (in)Part No. Height Depth Width
BDS100 1000 48 11 16.5
BDS200 2000 48 11.25 23.5
BDS300 3000 50 12.5 28.5
Splices using any connector
Dimensions (in)
Better Buried Splice ClosuresFor waterproof splicing of direct buried/underground duct cables. Can be re-entered when using Gella non-hardening filling compound. You can branch off of it, extend it and re-use it.
Transparent and can be buried immediately after splice completion. Filling compound not included - order separately. See below. From 3M.
End Caps, Multiple Port (for branch splices) The ends of the ports/nozzles come closed/sealed and are cut open to fit cable diameters during installation.
Encapsulant Filling CompoundsFor totally filling closures after completing splices to achieve a 100% waterproof closure. Use multiple packages to completely fill each closure.
Part No. Dia. LengthEnd Cap Dia. (in)
Filling (gram)
25 Pr. Modular
ConnectorsScotchlok™ Connectors
BB2X12SB2SCLHS 2 12 1.2 600 50 25
BB2X24SB2SCLHS 2 24 1.2 1,200 100 50
BB3X24SB2SCLHS 3 24 1.7 3,000 200 100
BB4X24SB2SCLHS 4 24 2 4,500 400 200
BB5X26SB2SCLHS 5 26 2.4 7,200 600 300
BB6X26SB2DCLHS 6 26 3.3 12,500 900 400
BB7X26SB2DCLHS 7 26 3.6 15,000 1,200 600
BB9X26SB2DCLHS 9 26 3.8 21,000 2,400 900
Dimensions (in)
Kits are supplied with single nozzle/port end caps. Multiple nozzle/port end caps may be ordered separately.
Part No. Dia. LengthEnd Cap Dia. (in)
Filling (gram)
25 Pr. Modular
ConnectorsScotchlok™ Connectors
BB2X12SB2SCLHS 2 12 1.2 600 50 25
BB2X24SB2SCLHS 2 24 1.2 1,200 100 50
BB3X24SB2SCLHS 3 24 1.7 3,000 200 100
BB4X24SB2SCLHS 4 24 2 4,500 400 200
BB5X26SB2SCLHS 5 26 2.4 7,200 600 300
BB6X26SB2DCLHS 6 26 3.3 12,500 900 400
BB7X26SB2DCLHS 7 26 3.6 15,000 1,200 600
BB9X26SB2DCLHS 9 26 3.8 21,000 2,400 900
Dimensions (in)
Kits are supplied with single nozzle/port end caps. Multiple nozzle/port end caps may be ordered separately.
Part No.No.
PortsClosure Dia. (in)
Port 1 Dia. (in)
Port 2 Dia. (in)
Std. Pkg.
Weight (lbs/10)
2DCLHS 2 2 1 1 10 1
3DCLHS 2 3 1.5 1 10 3
4DCLHS 2 4 2 1.7 10 5
5DCLHS 2 5 2.5 2.5 10 7
Part No.No.
PortsClosure Dia. (in)
Port 1 Dia. (in)
Port 2 Dia. (in)
Std. Pkg.
Weight (lbs/10)
2DCLHS 2 2 1 1 10 1
3DCLHS 2 3 1.5 1 10 3
4DCLHS 2 4 2 1.7 10 5
5DCLHS 2 5 2.5 2.5 10 7
Part No.Quantity (grams)
Type Package
Standard Package
Weight (lbs/package)
8882 High Gel Re-enterable Compound is a non-urethane encapsulant which permits easy re-entry. No cable cleaning required, even when splicing filled cable.
8882750F 750 Foil Bag 4 2
88821500F 1,500 Foil Bag 2 4
88823000F 3,000 Foil Bag 1 7
88823000C 3,000 Pouch & Pail 1 8.2
4407 Epoxy is a polyurethane epoxy which completely hardens, resulting in a closure becoming a solid, un-enterable “block”.
4407E 300 “E” bag 10 9
4407D 675 “D” bag 10 19
Part No.Quantity (grams)
Type Package
Standard Package
Weight (lbs/package)
8882 High Gel Re-enterable Compound is a non-urethane encapsulant which permits easy re-entry. No cable cleaning required, even when splicing filled cable.
8882750F 750 Foil Bag 4 2
88821500F 1,500 Foil Bag 2 4
88823000F 3,000 Foil Bag 1 7
88823000C 3,000 Pouch & Pail 1 8.2
4407 Epoxy is a polyurethane epoxy which completely hardens, resulting in a closure becoming a solid, un-enterable “block”.
4407E 300 “E” bag 10 9
4407D 675 “D” bag 10 19
Pair Count
Closures & Splicing
[email protected] 800-238-7514
B-7
Load Coils and Cases
Universal Smart Coil™ CasesCondition new and existing distribution cables for ADSL deployment beyond today’s distance limitations.
Increase current asset utilization by using legacy ADSL equipment for new service areasFuture-proof the network for fast ADSL provisioning, eliminating costly truck rolls to condition linesIncrease revenue streams with new ADSL customers who were previously denied service
Smart Coil™ Singles & Kwik Kases™
Condition individual lines to clear up trouble or deploy individual ADSL service orders.Provision ADSL to potential broadband customers beyond current distance limitations.Clear troubles and reduce mainte-nance costs on ADSL lines that
have experienced loss of POTS quality due to exces-sive distance.
•
•
•
•
•
Part No. Description
93900900B Smart Coil Ready Access Single Coil
93900901B Smart Coil Ready Access 6 pair Kwik Kase
93900902B Smart Coil Ready Access 12 Pair Kwik Kase
93900903B Smart Coil Ready Access 25 Pair Kwik Kase
93900904BUniversal 770-type Smart Coil Case, 25 pair, 20' encapsulant-filled stub
93900915BUniversal 770-type Smart Coil Case, 25 pair, 20' air core stub
93900905BUniversal 770-type Smart Coil Case, 50 pair, 20' encapsulant-filled stub
93900920BUniversal 770-type Smart Coil Case, 50 pair, 20' air core stub
93900906BUniversal 770-type Smart Coil Case, 100 pair, 20' encapsulant-filled stub
93900925BUniversal 770-type Smart Coil Case, 100 pair, 20' air core stub
93900907BUniversal 770-type Smart Coil Case, 200 pair, 20' encapsulant-filled stub
93900930BUniversal 770-type Smart Coil Case, 200 pair, 20' air core stub
93900908BUniversal 770-type Smart Coil Case, 300 pair, 20' encapsulant-filled stub
93900935BUniversal 770-type Smart Coil Case, 300 pair, 20' air core stub
Part No. Description
93900900B Smart Coil Ready Access Single Coil
93900901B Smart Coil Ready Access 6 pair Kwik Kase
93900902B Smart Coil Ready Access 12 Pair Kwik Kase
93900903B Smart Coil Ready Access 25 Pair Kwik Kase
93900904BUniversal 770-type Smart Coil Case, 25 pair, 20' encapsulant-filled stub
93900915BUniversal 770-type Smart Coil Case, 25 pair, 20' air core stub
93900905BUniversal 770-type Smart Coil Case, 50 pair, 20' encapsulant-filled stub
93900920BUniversal 770-type Smart Coil Case, 50 pair, 20' air core stub
93900906BUniversal 770-type Smart Coil Case, 100 pair, 20' encapsulant-filled stub
93900925BUniversal 770-type Smart Coil Case, 100 pair, 20' air core stub
93900907BUniversal 770-type Smart Coil Case, 200 pair, 20' encapsulant-filled stub
93900930BUniversal 770-type Smart Coil Case, 200 pair, 20' air core stub
93900908BUniversal 770-type Smart Coil Case, 300 pair, 20' encapsulant-filled stub
93900935BUniversal 770-type Smart Coil Case, 300 pair, 20' air core stub
Kwik Kase™ Load Coil CasesA U-shaped design (2/3 enclosed ABS plastic tube) allows coils to be easily snapped into or out of the case. This intelligent modular design
allows for future expansion with minimal service needs. Kwik Kases come
equipped with mini 88mH coils. Call for details. Available coil counts:
Ready Access Load Coil CasesDesigned for use in splice cases, buried plant housings and ready access closures. Call for details.Available coil counts: 3, 5, 6, 10, 11, 12, 16, 18, 25
In-Splice Modular Load Coil CaseDesigned to mount inside buried distribu-tion splice closures and pedestals, attach-able to the splice bundle itself.
The contour design conforms to the shape of round closure domes, preventing dome
closure problems. By-in-splice mounting load coils with the buried distribution splice closure, the need for separate component cases is eliminated.
The in-splice load coil case houses 25 load coils in an encapsulated, shock absorbing ABS plastic case. Components are terminated with 24 AWG, 36" long color-coded leads. Other lead lengths may be special ordered. Call for details.
Universal Load Coil CasesBoth versatile and convenient. These cases are truly universal, with mounting options for utility power, aerial strands and manholes in addition to direct burial installation. With the ability to house from 25 to 3,600 load coils. Call for details.
1, 2, 3, 4, 5, 6, 10, 11, 12, 15, 16, 18, 20, 24, 251, 2, 3, 4, 5, 6, 10, 11, 12, 15, 16, 18, 20, 24, 25
Closures & Splicing
[email protected] 800-238-7514
B-8
Certi-Seal™ Coax Coupling ClosuresFor splice protection and demarcation points. Designed for direct buried splicing of Series 59 and 6 and Series 7 and 11 coaxial cable.
Advantages:Economical – permits low cost repair of damaged cableReliable – withstands 14-day immersion without sig-nal degradation; withstands extreme temperaturesEasy to install – one piece housing snaps over coax connection; no special tools requiredFlexible – accommodates a variety of cables
Part No. 608082000 - for direct buried splicing of RG-6/RG-59 coaxial cablesPart No. 230186000 - for direct buried splicing of RG-7/RG-11 coaxial cables
Certi-Seal™ 2 Pair AerialDrop Wire Gel Closure for splice protection and sheath repair of 2 pair drop wire telephone cable; applications for aerial pole, pedestal and demarca-tion points.
Advantages:Reliable – high-compression, high-impact housing provides maximum durabilityEasy to install – one piece, snap-together latching Flexible – accommodates AMP Tel-splice or other industry standard wire splices
Part No. 963988000
Certi-Seal™ BuriedFor splice protection and demarcation points. Bond and protect butt and in-line splices from 2 through 12 pair buried service wires.
Advantages:Reliable – integral bonding system applies constant pressure on service wire shield for long term reliabilityEasy to install – one piece, snap together latching
Part No. 522132000 - for 2-6 pair Certi-Seal BuriedPart No. D35394000 - for 6-12 pair Certi-Seal Buried
••
•
•
•
••
•
•
Buried Service Wire Splice Kits3832 is a small kit for inline and butt splicing up to 5 pair buried service wires. Semi-hardening 4403-B epoxy filling compound remains semi-flexible and is included in kit. After the compound has been poured, the outer tube is rotated over the barrel opening to seal the closure. SLIC-5 kit is a rigid body closure for encapsulation of up to 5 pair buried service wire butt splices. Factory-filled with encapsulant, it is easily assembled and provides excellent long term moisture protection. From 3M.
Rigid Buried Splice ClosuresFor waterproof splicing of direct buried and under-ground duct cables. For straight splices only. Closures are ordered with a choice of filling compound. Shield, ground system and
strain relief bar are not included.
Part No.Inside
Dia. (in)Inside
Length (in)Max O.D. Over
Shield (in) Std. Pkg.Weight
(lbs/pkg.)
3832 1-1/8 5 9/32 12 6
SLIC5 3 n/a n/a 12 5
Part No.Inside
Dia. (in)Inside
Length (in)Max O.D. Over
Shield (in) Std. Pkg.Weight
(lbs/pkg.)
3832 1-1/8 5 9/32 12 6
SLIC5 3 n/a n/a 12 5
1 Maximum pair count with UY connectors.
Part No.Max. Pair
Count1
Inside Dia. (in)
Inside Length
(in)Cable
Dia. (in)Std. Pkg.
Weight (lbs/10)
89818882HIGHGEL
4/24 7/8 7-3/16 1/2 to 5/8 10 6
89828882HIGHGEL
18/24 1-3/8 10-3/4 5/8 to 1 10 14
89838882HIGHGEL
50/24 1-3/4 15-5/8 1 to 1-1/2 10 25
With 8882 Gella
Part No.Max. Pair
Count1
Inside Dia. (in)
Inside Length
(in)Cable
Dia. (in)Std. Pkg.
Weight (lbs/10)
898107 4/24 7/8 7-3/16 1/2 to 5/8 10 6
898207 18/24 1-3/8 10-3/4 5/8 to 1 10 14
898307 50/24 1-3/4 15-5/8 1 to 1-1/2 10 25
With 4407 Epoxy
1 Maximum pair count with UY connectors.
Part No.Max. Pair
Count1
Inside Dia. (in)
Inside Length
(in)Cable
Dia. (in)Std. Pkg.
Weight (lbs/10)
89818882HIGHGEL
4/24 7/8 7-3/16 1/2 to 5/8 10 6
89828882HIGHGEL
18/24 1-3/8 10-3/4 5/8 to 1 10 14
89838882HIGHGEL
50/24 1-3/4 15-5/8 1 to 1-1/2 10 25
With 8882 Gella
Part No.Max. Pair
Count1
Inside Dia. (in)
Inside Length
(in)Cable
Dia. (in)Std. Pkg.
Weight (lbs/10)
898107 4/24 7/8 7-3/16 1/2 to 5/8 10 6
898207 18/24 1-3/8 10-3/4 5/8 to 1 10 14
898307 50/24 1-3/4 15-5/8 1 to 1-1/2 10 25
With 4407 Epoxy
Closures & Splicing
[email protected] 800-238-7514
B-9
Klik-It® Buried Service Wire Closure
The Klik-It closure design allows the craft person to visually confirm the splice arrangement before burial.
Optional strain relief and bonding hardware is available.
Klik-It has a positive latch that “clicks” firmly shut.
Both halves of the Klik-It are filled with grease, ensuring that all the splice work is protected.
Easy to install, trouble free closures. A pre-filled, two-piece design for encapsulating up to five-pair buried service wire. The two sections snap together and the units are ready for immediate burial.
Enhanced Ranger SERVISEAL® ClosureProvides long-term protection for buried service wire splices up to six pairs (1/2" cable diameter). RUS/RDUP listed.
Only two components, pre-filled vial and cap with integral insertion ram and bonding connectorEnhanced, integral bonding connectorPositive locking feature ensures proper application and discourages reuseKit comes complete with everything needed for application12 kits per standard carton
From Preformed Line Products.Part No. 8006137
•
••
•
•
Part No. Description
Max. Pair
Splice Style
Strain Relief Bonding
C8811 Standard 5 Butt No Barrel
C8813 Straight Splice 5 Straight No Barrel
C8816 w/out Grounding 5 Butt No None
C8820 Standard 5 Butt Yes Integral
Part No. Description
Max. Pair
Splice Style
Strain Relief Bonding
C8811 Standard 5 Butt No Barrel
C8813 Straight Splice 5 Straight No Barrel
C8816 w/out Grounding 5 Butt No None
C8820 Standard 5 Butt Yes Integral
Grounding BraidFlat 1/2" wide tinned copper braid electrical conductor for maintaining shield continuity through a splice or connecting to ground bars.
Part No. 25T25 - 25' coil, no eyeletsPart No. EM2050 - 25' coil, 3" eyelets, solder connectionPart No. EM2051 - 25' coil, 3" eyelets with web covering, factory-installed solder connection
Grounding Braid Dispenser Pack25' of 25T25 grounding braid and 25' of insulation sleeve in one convenient dispensing package.
Shield Bond ConnectorTo make a positive electrical connection to cable shield.
Part No. Standard Package Weight (each)
254467 5 15
Part No. Standard Package Weight (each)
254467 5 15
4460S 4460D 4462SN4460S 4460D 4462SN
Part No. DescriptionStandard Package
Weight (lbs/100)
4460S With protective shoe 100 5
4460D Smaller version of the 4460S 100 4
4462SN Stronger stud 100 5
4462SNA Extended stud 500 5
Closures & Splicing
[email protected] 800-238-7514
B-10
4000-D/TR24 Super Mini Connector ModuleIncludes self-stripping phos-phor bronze U-contacts, wire channels, and stainless steel cut off blades. Compatible with all MS2™ tooling. All
splicing functions can be performed while reducing the overall splice diameter by approximately 30% over 4000 B/G Series modular connectors. Used for two-wire splicing applications, and will accommodate 22-28 AWG (.8-.32 mm) copper conductors and accepts a maximum insulation O.D. of .065".
4075-S Sealant BoxFor use with the MS2 4000-D super-mini modules. To be used in two-wire applications only. One insertion tool included with every 12 sealant boxes.
4000-DWP/TR Connector SystemCombines a 4000-D/TR super mini module and a 4075-S sealant box, offer-ing waterproof splicing of 22-28 AWG (.7-.32 mm) copper in buried, aerial and underground applications. Also makes re-entry into splices encapsulated with
re-enterable gel much easier. Modules may be tested at any time once the sealant box is removed, because the sealant box prevents encapsulants from filling the wire channels and test entry points.
4000-C/GTR Super Mini ConnectorAn encapsulated version of the 4000-D module designed specifically for protection from humidity and con-densation. Cover, base and body are gel-encapsulated.
4005-DPM/TR Pluggable ModuleWithout interrupting service, the technician can rearrange and transfer working circuits and add
or remove load coil and other apparatus. Changes to 25 pairs at a time can be made without cutting or re-splicing the conductors into new modules.
710 Splice Connection System for Dry or Filled ApplicationsModules are available for straight, half-tap and bridge splicing. May be used to splice 19 to 26 AWG conductors. Multiple
pairs of 5, 10, 20 or 25 are quickly and easily spliced at one time. Call for ordering matrix.
4049-R Lite RigA complete splicing rig, with pistol-gripped Hand Hydraulic Crimper. Durable, rustproof and waterproof. Comfortable place to sit while working, easy to transport.
MS2™ Modular Splicing System
For splicing/terminating/cross-connecting multiple 22-28 AWG telephone pairs in both inside and outside applications. Splice/terminate 25 pairs in one crimping operation. The single crimp strips the insulation, terminates the conductors, and trims off excess wire. From 3M.
Part No. Description PackageWeight
(lbs/case)
4000GTR Encapsulated super mini 120 9
4000DTR24 Super mini 120 7
4000DWPTR Waterproof super mini 120 12
4005DPMTR Super Mate pluggable 120 8
4049R Lite rig kit 1 25
4075S Sealant box 120 9
All other 3M modular system parts and accessories also available.
Part No. Description PackageWeight
(lbs/case)
4000GTR Encapsulated super mini 120 9
4000DTR24 Super mini 120 7
4000DWPTR Waterproof super mini 120 12
4005DPMTR Super Mate pluggable 120 8
4049R Lite rig kit 1 25
4075S Sealant box 120 9
All other 3M modular system parts and accessories also available.
Closures & Splicing
[email protected] 800-238-7514
B-11
Scotchlok® ConnectorsFor butt splicing, tapping or inline splicing 1, 2, 3 or 4 insulated telephone conductors without stripping the insulation. Each connector is filled with a sealing compound. When crimped with the proper crimping tool, a stable
moisture-proof splice/tap is achieved. From 3M.
Scotchlok® Crimping Tools from 3M
UR2UR2
Part No. PackagingStandard Package Crimp Tool
UY2BOX box 100 E9BM, E9R, E9Y
UY2CART cartridge 120 E9C
UR2BOX box 100 E9BM, E9R, E9Y
UR2CART cartridge 100 E9C
UCCBULK bulk 1,000 E9BM, E9R, E9Y
UDW2BOX box 100 E9BM
Part No.Cap
ColorNo. Cond.
Spliced Conductor Size/Type
UY2 Yellow 2 19-26 AWG, Air Core/Filled
UR2 Red 2 or 3 19-26 AWG, Air Core/Filled
UG Green 1 tap 19-26 AWG, Air Core/Filled
UCC Clear 2 22-26 AWG, Air Core/Filled
UDW2 N/A Drop Pair 2 16-19 AWG, Air Core/Filled
U1B - 4 (1 pair inline) 16-19 Drop Wire
Part No. PackagingStandard Package Crimp Tool
UY2BOX box 100 E9BM, E9R, E9Y
UY2CART cartridge 120 E9C
UR2BOX box 100 E9BM, E9R, E9Y
UR2CART cartridge 100 E9C
UCCBULK bulk 1,000 E9BM, E9R, E9Y
UDW2BOX box 100 E9BM
Part No.Cap
ColorNo. Cond.
Spliced Conductor Size/Type
UY2 Yellow 2 19-26 AWG, Air Core/Filled
UR2 Red 2 or 3 19-26 AWG, Air Core/Filled
UG Green 1 tap 19-26 AWG, Air Core/Filled
UCC Clear 2 22-26 AWG, Air Core/Filled
UDW2 N/A Drop Pair 2 16-19 AWG, Air Core/Filled
U1B - 4 (1 pair inline) 16-19 Drop Wire
E9BM E9C E9YE9BM E9C E9Y
Part No. DescriptionConnector Type Feed
Mechanical Advantage
Weight (lbs/ea.)
E9BM tool only individual 10:1 .9
E9C cartridge tool w/case cartridge 7:1 2
E9R tool only individual 10:1 .6
E9Y tool only individual 3:1 .3
Part No. DescriptionConnector Type Feed
Mechanical Advantage
Weight (lbs/ea.)
E9BM tool only individual 10:1 .9
E9C cartridge tool w/case cartridge 7:1 2
E9R tool only individual 10:1 .6
E9Y tool only individual 3:1 .3
Crimp ToolThe parallel jaws assure even pressure, and the handles will not release until a full crimp has been made. Part No. P8533
“B” Wire ConnectorsFor splicing two or three 24-26 AWG plastic insulated telephone conductors without stripping the insulation, or
19-22 AWG with stripping. Conductor ends are simply inserted into the connector. The conductor is then crimped with the P8533 crimping tool (see above).
Grounding HarnessesFor quickly installed, stable, splice and
terminal ground connections. 14 AWG solid or stranded tinned copper conductors and green 600V PVC insula-tion. A variety of tin-plated terminating connectors are available for specific applications.
6 AWG stranded tinned copper conductors with tinned ring terminals suitable for termination on No. 10 studs on each end.
Part No. Description Standard PackageWeight
(lbs/package)
EA7759P mylar lined 1,000 3
EA7759S grease filled 1,000 4
Part No. Description Standard PackageWeight
(lbs/package)
EA7759P mylar lined 1,000 3
EA7759S grease filled 1,000 4
Part No.Length
(in)Connector
Type UsageStd. Pkg.
Weight (lbs/100)
EM1417TFP 16.5 1 termifoil pedestals 25 3
EM1420TFTF 20 2 termifoils splices 25 4.25
EM1415DSTF 151 termifoil
1 flagpedestals with tabs 25 3
EM1415FLR 151 ring 1 flag
pedestals with tabs 25 3
EM142652RFR 212 rings
1 spadeready access
closures25 8
Other configurations also available.
Part No.Length
(in)Connector
Type UsageStd. Pkg.
Weight (lbs/100)
EM1417TFP 16.5 1 termifoil pedestals 25 3
EM1420TFTF 20 2 termifoils splices 25 4.25
EM1415DSTF 151 termifoil
1 flagpedestals with tabs 25 3
EM1415FLR 151 ring 1 flag
pedestals with tabs 25 3
EM142652RFR 212 rings
1 spadeready access
closures25 8
Other configurations also available.
Part No. Description Length (in)Standard Package
EM810015B10 uninsulated 15 25
EM81001510 insulated 15 25
EM81001810 insulated 18 25
Part No. Description Length (in)Standard Package
EM810015B10 uninsulated 15 25
EM81001510 insulated 15 25
EM81001810 insulated 18 25
Closures & Splicing
[email protected] 800-238-7514
B-12
Splicing SleevesFor high tensile strength splic-ing two solid bare or copperweld
conductors. Conductor insulations must be stripped one half the length of a sleeve prior to splicing. Properly crimped, the strength of the splice will exceed the breaking strength of the conductor.Letter in part number indicates the correct compres-sion tool crimping groove. From Nicopress.
Reducing SleevesFor splicing two different gauge/size solid copper or copper-clad
steel (CW) conductors. Letter in part number indicates the correct compression tool crimping groove. From Nicopress.
Splice SeparatorsFor insulating two adjoining splicing sleeves from each other
when splicing parallel conductor rural wire. The overall assembly is sealed by taping. From Nicopress.
Part No. Conductor Size/TypeStd. Pkg.
Weight (lbs/100)
For solid copper or copper-clad steel (CW) conductors
3045B 17-18 AWG Copper & CW 200 1
3051B 16 AWG Copper & CW 100 1
3064B 14 AWG Copper 300 1/2
1064C 14 AWG Copper & CW 100 1-1/2
1080C 12 AWG Copper 100 1-1/2
1080D 12 AWG Copper & CW 100 2
1102C 10 AWG Copper 100 1-1/2
3102D 10 AWG CW 100 2
1102J 10 AWG CW 100 5-1/2
1128J 8 AWG Copper 100 4-1/2
For lashing wire
4045B .045" SS lashing wire 200 1
Other sizes also available.
Part No. Conductor Size/TypeStd. Pkg.
Weight (lbs/100)
For solid copper or copper-clad steel (CW) conductors
3045B 17-18 AWG Copper & CW 200 1
3051B 16 AWG Copper & CW 100 1
3064B 14 AWG Copper 300 1/2
1064C 14 AWG Copper & CW 100 1-1/2
1080C 12 AWG Copper 100 1-1/2
1080D 12 AWG Copper & CW 100 2
1102C 10 AWG Copper 100 1-1/2
3102D 10 AWG CW 100 2
1102J 10 AWG CW 100 5-1/2
1128J 8 AWG Copper 100 4-1/2
For lashing wire
4045B .045" SS lashing wire 200 1
Other sizes also available.
Part No. Conductor Size/TypeStd. Pkg.
Weight (lbs/100)
1080X064C 12 to 14 AWG 100 1-1/2
1102X064C 10 to 14 AWG 100 1-1/2
1102X080C 10 to 12 AWG 100 1-1/2
Other sizes also available.
Part No. Conductor Size/TypeStd. Pkg.
Weight (lbs/100)
1080X064C 12 to 14 AWG 100 1-1/2
1102X064C 10 to 14 AWG 100 1-1/2
1102X080C 10 to 12 AWG 100 1-1/2
Other sizes also available.
Part No. Wire TypeStandard Package
Weight (lbs/100)
3457CD “C” rural wire 100 .6
Part No. Wire TypeStandard Package
Weight (lbs/100)
3457CD “C” rural wire 100 .6
Compression ToolsFor crimping Nicopress sleeves. The letter in each sleeve part number indicates the correct size groove for crimping each sleeve.
C-CementSpecifically designed for applications where a domed style configuration is preferred. Two sizes available; 6-1/2" x 22" and 6-1/2" x 17".Clifford recommends C-Cement for the Preformed Line Products closures. See page B-4.Part No. 80805238 - 1 oz. C-CementPart No 80802377 - 4 oz. C-Cement
17-BA
31-DJ
17-BA
31-DJ
Part No.Crimping Groove
Tool Length (in)
Standard Package
Weight (lbs/ea.)
17BA A & B 8 1 1/2
31DC C & D 11-3/4 1 2
31CJ C & J 11-3/4 1 2
31DJ D & J 11-3/4 1 2
Other sizes also available.
Part No.Crimping Groove
Tool Length (in)
Standard Package
Weight (lbs/ea.)
17BA A & B 8 1 1/2
31DC C & D 11-3/4 1 2
31CJ C & J 11-3/4 1 2
31DJ D & J 11-3/4 1 2
Other sizes also available.
Closures & Splicing
[email protected] 800-238-7514