1
Calculation/Analysis Change Notice 1. QA: N/A SSC 2. Page 1 of_1_ Complete only applicable items. 3. Document Identifier: ENG.20080304.0027 I 15. CACN: 800-KOC-SSDO-00400-000 002 6. Title: Ground Control for Non-Emplacement Drifts for LA 7. Reason for Change: This CACN is being created to amend the Quality Assurance information in the Ground Control for Non-Emplacement Drifts for LA to be consistent with system classification revisions in the Basis of Design for the TAD Canister-Based Repository Design Concept. The document's classification was based on the Q-List at the time of issue and is being amended to reflect recent changes in the BOD on system classifications which include: - The subsurface non-emplacement openings classification was changed to non-ITS/non-ITWI. 8. Supersedes Change Notice: I Dves If, Ves, CACN No. [8] No 9. Change Impact: Inputs Changed: [8] Ves DNo I Results Impacted: Dves [8] No Assumptions Changed: Dves [8] No I Design Impacted: Dves [8] No 10. Description of Change: Revise text on pages 1,21,24, and 29 as follows: On page 1 (Cover Page), Block 1, the document's QA status will change from QA: QA to QA: N/A. On page 24, add reference 2.2.58: 2.2.58 BSC 2008. Basis of Design for the TAD Canister-Based Repository Design Concept. 000-3DR-MGRO-00300-000-002. Las Vegas, Nevada: Bechtel SAIC Company. On page 29, Section 4.1 Quality Assurance "This calculation has been prepared in accordance with EG-PRO-3DP-G04B-00037, Calculations and Analyses (Reference 2.1.1). The Q-List designates the ground control system for non-emplacement drifts as 'not important to waste isolation', and 'not important to safety', and the Safety Category (SC) is 'Non-SC' (Reference 2.2.27, p. A-II). However, this document is prepared with a QA:QA status since the Q-List identifies some of the "Non-emplacement Openings" (North Portal, North Ramp, access main, and turnouts) as Important to Safety and Safety Category "SC" (Reference 2.2.27, Table A-I, p. A-II)." is replaced as follows: "This calculation was prepared in accordance with EG-PRO-3DP-G04B-00037, Calculations and Analyses (Reference 2.1.1). The Subsurface Facility is classified as "not important to safety" (non-ITS) and the non-emplacement openings are classified as "not important to waste isolation" (ITWI) in the Basis of Design for the TAD Canister-Based Repository Design Concept (Reference 2.2.58, Section 8.1.2). Accordingly, this calculation is designated as QA: N/A." On page 21, delete Reference 2.2.27: BSC 2005. Q-List. 000-30R-MGRO-00500-000-003. Las Vegas, Nevada: Bechtel SAIC Company. ACC: ENG.20050929.0008. [DIRS 175539] Adding Reference 2.2.58 meets the management direction to align the SAR related reference quality statements with the current BOD. Reference 2.2.28, the previous BOD revision that was effective on the calculation's approval date, is preserved to maintain the calculation's traceability. 11. REVIEWS AND APPROVAL Printed Name Signature Date 11a. Originator: u- - ," David H. Tang (} 11 b. Checker: Jay Cho rLuLlJe/J- 3/I/o¥ 11c. EGS: Fei Duan 11 { ./'. 11d. OEM: Robert J. Boutin ,,-l :-t#' e. Design Authority: 6/' J De- B. Rusinko 3/ 10 8 1 EG-PRO-3DP-G04B-00037.5-r1

800-K0C-SSD0-00400-000-00A, Rev. 00A, CACN 002, 'Ground

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 800-K0C-SSD0-00400-000-00A, Rev. 00A, CACN 002, 'Ground

Calculation/Analysis Change Notice 1. QA: N/ASSC 2. Page 1 of_1_

Complete only applicable items.

3. Document Identifier: ENG.20080304.0027 I ~~~v.: 15. CACN:800-KOC-SSDO-00400-000 0026. Title:Ground Control for Non-Emplacement Drifts for LA7. Reason for Change:This CACN is being created to amend the Quality Assurance information in the Ground Control for Non-Emplacement Drifts for LAto be consistent with system classification revisions in the Basis ofDesign for the TAD Canister-Based Repository Design Concept.The document's classification was based on the Q-List at the time of issue and is being amended to reflect recent changes in theBOD on system classifications which include:

- The subsurface non-emplacement openings classification was changed to non-ITS/non-ITWI.

8. Supersedes Change Notice: I Dves If, Ves, CACN No. [8] No

9. Change Impact:

Inputs Changed: [8] Ves DNo I Results Impacted: Dves [8] No

Assumptions Changed: Dves [8] No I Design Impacted: Dves [8] No

10. Description of Change:Revise text on pages 1,21,24, and 29 as follows:

On page 1 (Cover Page), Block 1, the document's QA status will change from QA: QA to QA: N/A.

On page 24, add reference 2.2.58:

2.2.58 BSC 2008. Basis ofDesign for the TAD Canister-Based Repository Design Concept. 000-3DR-MGRO-00300-000-002. LasVegas, Nevada: Bechtel SAIC Company.

On page 29, Section 4.1 Quality Assurance"This calculation has been prepared in accordance with EG-PRO-3DP-G04B-00037, Calculations and Analyses (Reference 2.1.1).The Q-List designates the ground control system for non-emplacement drifts as 'not important to waste isolation', and 'notimportant to safety', and the Safety Category (SC) is 'Non-SC' (Reference 2.2.27, p. A-II). However, this document is preparedwith a QA:QA status since the Q-List identifies some of the "Non-emplacement Openings" (North Portal, North Ramp, accessmain, and turnouts) as Important to Safety and Safety Category "SC" (Reference 2.2.27, Table A-I, p. A-II)."is replaced as follows:"This calculation was prepared in accordance with EG-PRO-3DP-G04B-00037, Calculations and Analyses (Reference 2.1.1). TheSubsurface Facility is classified as "not important to safety" (non-ITS) and the non-emplacement openings are classified as "notimportant to waste isolation" (ITWI) in the Basis ofDesign for the TAD Canister-Based Repository Design Concept (Reference2.2.58, Section 8.1.2). Accordingly, this calculation is designated as QA: N/A."

On page 21, delete Reference 2.2.27: BSC 2005. Q-List. 000-30R-MGRO-00500-000-003. Las Vegas, Nevada: Bechtel SAICCompany. ACC: ENG.20050929.0008. [DIRS 175539]

Adding Reference 2.2.58 meets the management direction to align the SAR related reference quality statements with the currentBOD. Reference 2.2.28, the previous BOD revision that was effective on the calculation's approval date, is preserved to maintainthe calculation's traceability.11. REVIEWS AND APPROVAL

Printed Name Signature Date11a. Originator:

'D~I I~. u- - ,"

David H. Tang 3/tlo~(}11 b. Checker:Jay Cho J~ rLuLlJe/J- 3/I/o¥11c. EGS:Fei Duan (2A/:!/~Af~

11{

./'. ~)/kY11d. OEM: V~J'Yl~Robert J. Boutin ,~.c;.J ,,-l~PA :-t#'

e. Design Authority:6/' JDe-

B. Rusinko ~~~;/~ 3/1 0 81EG-PRO-3DP-G04B-00037.5-r1