1
874 Best® Butyl II Unsupported Butyl coating DESCRIPTION Fully coated Rolled cuff Standard finish Without special treatment Anatomical shape Available by individual pair in polybag with eyelet BENEFITS A thin, light glove with a "second skin" feel Protects the hand from a wide array of chemical hazards (more information on www.chemrest.com) Impermeable for working in damp or greasy environments Cuff prevents dirt from entering the glove Lower allergy risks Designed for easy movement and continuous wear Packaging that helps finding the right model in displays Wrist well protected Low-soil colour AVAILABLE SIZES 8/M • 9/L • 10/XL • 11/XXL LENGTH Dependent on size, in mm (flat) 350 PACKAGING Pairs or pieces per pack/box 1/12 COLOUR OF SUPPORT/COATING Black THICKNESS in mm 0,35 RECOMMENDATIONS FOR USE Store away from light and humidity Rinse the gloves in running water before removing, using a neutral detergent if necessary Do not wear gloves when there is a risk of entanglement by moving parts of machines. Potential allergens: thiazoles and thiurames [ Updated 01/02/2010 ] RECOMMENDED FOR THESE RISKS: Chemicals RECOMMENDED FOR THESE LINES OF WORK: RECOMMENDED FOR THESE LINES OF WORK: Chemical industry / Acid components Chemical industry / Acid components Police & Army Police & Army Chemical industry / Acetone and Ketone components Chemical industry / Acetone and Ketone components EC compliance certificate delivered by the notified body 0516 STFI Germany - Postfach 1325 - D-09072 Chemnitz - Germany The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary. Cat. III 0120 EN388 - 1994 0010 ABRASION 0 1 2 3 4 TEARING 0 1 2 3 4 CUTTING 0 1 2 3 4 5 PUNCTURE 0 1 2 3 4 EN 374-2 - 1994 EN 374-3 - 1994 HYDROCHLORIC ACID 36% 0 1 2 3 4 5 6 METHANOL 0 1 2 3 4 5 6 KEROSENE 0 1 2 3 4 5 6 CAUSTIC SODA 4% 0 1 2 3 4 5 6 Globus Building 38 Wheel Forge Way Trafford Park, Manchester M17 1EH Tel: 0161 877 4747 Fax: 0161 877 4746 www.globus.co.uk

874 Best® Butyl II - Showa Gloves · 874 Best® Butyl II Unsupported Butyl coating DESCRIPTION •Fully coated •Rolled cuff •Standard finish •Without special treatment •Anatomical

Embed Size (px)

Citation preview

Page 1: 874 Best® Butyl II - Showa Gloves · 874 Best® Butyl II Unsupported Butyl coating DESCRIPTION •Fully coated •Rolled cuff •Standard finish •Without special treatment •Anatomical

874 Best® Butyl IIUnsupportedButyl coating

DESCRIPTION• Fully coated• Rolled cuff• Standard finish• Without special treatment• Anatomical shape• Available by individual pair in polybag with eyelet

BENEFITS• A thin, light glove with a "second skin" feel• Protects the hand from a wide array of chemical hazards (more

information on www.chemrest.com)• Impermeable for working in damp or greasy environments• Cuff prevents dirt from entering the glove• Lower allergy risks• Designed for easy movement and continuous wear• Packaging that helps finding the right model in displays• Wrist well protected• Low-soil colour

AVAILABLE SIZES 8/M • 9/L • 10/XL • 11/XXL

LENGTHDependent on size, in mm (flat) 350PACKAGINGPairs or pieces per pack/box 1/12COLOUR OF SUPPORT/COATING

BlackTHICKNESSin mm 0,35

RECOMMENDATIONS FOR USE• Store away from light and humidity• Rinse the gloves in running water before removing, using a neutral detergent if

necessary• Do not wear gloves when there is a risk of entanglement by moving parts of

machines.• Potential allergens: thiazoles and thiurames

[ Updated 01/02/2010 ]

RECOMMENDED FOR THESE RISKS:

Chemicals

RECOMMENDED FOR THESE LINES OFWORK:

RECOMMENDED FOR THESE LINES OFWORK:

Chemical industry / Acid componentsChemical industry / Acid components

Police & ArmyPolice & Army

Chemical industry / Acetone and Ketonecomponents

Chemical industry / Acetone and Ketonecomponents

EC compliance certificate delivered by the notified body 0516 STFI Germany - Postfach 1325 - D-09072 Chemnitz - GermanyThe descriptions, characteristics, applications and photos are given for information purposes and do not constitute acontractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.

Cat. III

0120

EN388 - 1994

0010

ABRASION0 1 2 3 4

TEARING0 1 2 3 4

CUTTING0 1 2 3 4 5

PUNCTURE0 1 2 3 4

EN 374-2 - 1994 EN 374-3 - 1994 HYDROCHLORIC ACID 36%0 1 2 3 4 5 6

METHANOL0 1 2 3 4 5 6

KEROSENE0 1 2 3 4 5 6

CAUSTIC SODA 4%0 1 2 3 4 5 6

Globus Building38 Wheel Forge WayTrafford Park, ManchesterM17 1EHTel: 0161 877 4747 Fax: 0161 877 4746www.globus.co.uk