A T A PROTECTIVE GEAR

FOR WOMEN

CATALOGUE

PROTECTIVE GEAR

WO

RK

WEA

RSAHARA LADIES PV ACID CONTI SUIT

SAHARA ladies cut polyviscose acid conti suit. • Flares around bust & hips with side slits,• Brass YKK zipper, • Breast pocket with flap and press stud to close, • Slanted side jacket pockets, • Fully posted (triple stitched), • All stress seams are bar tacked, • Double stitched pockets, • Deep swing side trouser pockets, • Ruler pocket on trouser, button cuffed sleeve, • Adjustable button waist. • 50mm pink/ silver reflective tape around both arms, both upper legs, 20 x 20 cm cross on

back, 10cm above each breast

SAHARA ladies cut 100% cotton j54 or d59 conti suit. • Flares around bust & hips with side slits, • Brass YKK zipper, • Breast pocket with flap and press stud to close, • Slanted side jacket pockets, • Fully posted (triple stitched), • All stress seams are bar tacked, • Double stitched pockets, • Deep swing side trouser pockets, • Ruler pocket on trouser, • Ribbed cuffed sleeve, • Adjustable button waist• 50mm pink/ silver reflective tape around both arms, both upper legs, 20 x 20 cm cross on

back, 10cm above each breast

SAHARA LADIES BUTTON FRONT CONTI SUIT

PREPARED BY SHEQ SAFETY CC

WO

RK

WEA

RSAHARA LADIES BOILER SUIT

SAHARA ladies cut J54 or D59 boiler suit. • Concealed button front with flap and press stud close,• Brass YKK zip adjustable sides, • Brass YKK back horizontal zip off feature, • Ladies cut adjustable button waist, • 2 breast pockets with press stud to close, • Ribbed cuffs, swing side pockets, • Ruler pocket, • Fully posted (triple stitched), • All stress seams are bar tacked, • 50mm pink silver reflective tape around both arms, both legs, 10cm strip above each breast

pocket and a 30cm line on the back

SAHARA ladies cut 100% cotton J54 or D59 conti suit. • Flares around bust & hips with side slits, • Brass YKK zipper, • Breast pocket with flap and press stud to close, • Slanted side jacket pockets, • Fully posted (triple stitched), • All stress seams are bar tacked, • Double stitched pockets, • Deep swing side trouser pockets, • Ruler pocket on trouser, • Ribbed cuffed sleeve, • Elasticated waist with drawstring to accommodate for pregancy

SAHARA LADIES DRAWSTRING CONTI SUIT


FITTING INSTRUCTIONS

Make sure

drawstring is tied

tightly, once tied,

tuck drawstring

inside trouser

UN

DER

GA

RM

ENT

S

Ladies 220g 100% carded cotton interlock thermal vests and long johns/ slaxliner, used in cold weather.Available in royal blue and white

LADIES THERMAL CLOTHING


SAHARA LADIES ANGLO CONTI SUIT

SAHARA ladies Anglo 100% cotton J54 or D59 conti suit. • Flares around bust & hips with side slits, • Brass YKK zipper, • Breast pocket with zip, • Slanted side jacket pockets, • Fully posted (triple stitched), • All stress seams are bar tacked, • Double stitched pockets, • Deep swing side trouser pockets, • Ruler pocket on trouser, • Ribbed cuffed sleeve, • Adjustable button waist. • 25mm silver reflective tape around both arms, both upper legs, 20 x 20 cm cross on back,

10cm above each breast

WO

RK

WEA

R


SAHARA ladies cut long sleeve winter and summer workshirts• 100% cotton shirting fabric• Button down• Mesh vent inner back with vent (summer shirt with

vents - winter shirts without vents)• Hi glow industrial wash reflective tape• Tape around both arms, front waist, back shoulder to

waist in x form, over each breast pocket

SAHARA LADIES TWO TONE WORKSHIRT

SAHARA MATERNITY WORKSHIRT

• 100% cotton or J54• Cargo pockets• Side entry pockets• Back pockets with button down flap• Ladies cut• Navy blue• Minimum order qty’s apply

• Reflective tape optional

SAHARA LADIES CARGO PANTS

WO

RK

WEA

R


SAHARA LADIES BOOTLEG STRETCH JEAN

Sahara ladies bootleg 8.5 ounce stretch indigo denim jeans

• Industrial wash• Posted inner leg• Deeper pocket • Rust less rivets• Oxidized YKK zipper• Extra length to accommodate all users

Reflective tape can be added upon request

• Two tone golf shirt 180gsm poly cotton (RWPCON).• Standard wash ts50 silver tape. • Level 1 garment• 180gsm poly/cotton 50/50 pique knitted fabric (RWPCON)

on the inside for comfort and 100% polyester on the outside for colour conforming to the en471 and sans 50471 standard. Day glow orange top with navy blue bottom

WATT TWO TONE SHORT SLEEVE GOLF SHIRT

SAHARA LADIES MATERNITY JEANS

WO

RK

WEA

R


• 300g Polyester softshell with bonded fleece• Reflective piping• Adjustable cuffs• Hood• Outer jet pocket with zip closure, inner pockets• Left sleeve zip cell phone pocket• Black/ Pink• S – 5XL

LADIES WATT SOFTSHELL JACKET LADIES WATT BUNNY JACKET

• 240g Polycotton Outer• Fleece lining• Chest pockets with zip closure• Cell phone pocket• Pocket on sleeve• Ribbed cuffs & hem• Zip-off sleeves

WO

RK

WEA

R


• Bunny jacket 2 tone navy blue 240gsm polycotton 240gsm polycotton pink.

• Econo wash 50mm silver tape • The jacket has detachable sleeves and fleece lining • Level 3 garment

LADIES BUNNY JACKET EN4 PINK REFLECTIVE JACKET

• EN4 jacket poly pink 125gsm² (RWP125P) standard wash TS50 silver tape

• Level 2 garment

SP

OR

TS

BR

AS


ANITA A5526 SPORTS BRA

• Imported• Firm support x-control• Non wire, non moulded• Cross over style, seamed• Fabric for fast moisture absorption and release• Adjustable straps• Black


• Imported• Maximum support – momentum sports bra• Underwire, non-moulded cup• Seam free, adjustable strap• Black or white


• Imported• Maximum extreme control spots bra• Non wire, non-moulded• Seamed cup• Padded adjustable straps• Black & white

STORM IN A-G CUP CJ1040 SPORTS BRA

• Non wire, non moulded• Full cup, seamed cup• Padded adjustable strap that can be crossed

over at back• White

STORM IN A-G CUP CJ1040 SPORTS BRA

• Non wire, non moulded• Full cup, seamed cup• Padded adjustable strap that can be crossed

over at back• Black

TRIACTION T7512-2 SPORTS BRA

• Twin pack• Underwire, non-moulded cup• Seamed, no lace• Adjustable straps, cotton fabric• Can be used for light sport• Black & white

SP

OR

TS

BR

AS


TRIACTION T7615 SPORTS BRA

• Underwire• Non moulded, seamed cup• Padded adjustable strap• Clip at back to make racer back• White or black


• Imported• Maximum support – momentum sports bra• Non wire, non-moulded cup• Seam free, adjustable strap• Beige or black

SHOCK ABSORBER IB520 SPORTS BRA

• Non-wire, non moulded cup• No lace seamed• Padded adjustable elastic straps• Straps can be worn crossed over or normal• Cotton fabric, high impact• White or black or beige


• Imported• Maximum support air control sports bra• Non wire, non-moulded• Seam free• Breathable mesh fabric on the outer cup• Additional side support• Padded adjustable strap• Black with pink

SP

OR

TS

BR

AS



• Non-wire, non moulded cup• No lace seamed• Padded adjustable elastic straps• Straps can be worn crossed over or normal• Cotton fabric, high impact• White or black

TRIUMPH T3581 SPORTS BRA

• Non wire• Non moulded cup, seam free• Padded adjustable strap• Black


• Run bra, non-wire• Non moulded cup• No lace, seamed• Adjustable racer back with clasp• Reduces up to 78% bounce• White or black


• Imported• Maximum dynamixstar racer back sports bra• Non wire, non moulded• Seam free, racer back• Black or white or aqua

EYE

PR

OT

ECT

ION

ELVEX AVION SF

• Frame is slimmer than the standard specs making it ideal

for slender or more narrow facial profiles.

• Wrap-around, uni-lens design offers full panoramic view

and excellent side protection.

• Soft, flexible nose bridge minimizes slippage and

provides all day comfort.

• Soft, over moulded temples keep eyewear comfortable

and secure.

• Lens available in clear, clear anti-fog, grey and grey anti-

fog.

• Polycarbonate lenses absorbs 99.99% of harmful UV A, B

and C, 180-380nm.

• Ballistic v0 rated* for impact protection, 7x ANSI Z87+

energy. (4x z87+ impact velocity)

• Tested to us military standard mil-prf-31013 impact test.

• Meets ANSI Z87.1-2010+, CE EN-166.

ELVEX HELIUM 20

• ErgoFit Temples fit the contour of your head for an amazingly

comfortable, secure, non slip fit even with ear muffs and

headgear

• Extended lens coverage for great protection ad style

• Neutral pantoscopic angle and extended nose bridge to broaden

fitting to Asia, African American and Mexican facial profiles

• Distortion-free wraparound polycarbonate lens, offer superior

peripheral vision and protection

• Class 1 optics

• Semi-frame design, available in clear hard coat lens and grey

• SuperCoat anti-fog, anti-static and anti-scratch washable coating

• Polycarbonate lense absorbs 99.9% of harmful UV A, B and C,

180-380nm

• Meets ANSI Z87.1-2010+, CE EN-166


3M SECUREFIT

The 3M™ securefit™ safety spectacle is comprised of a

rimless lens and fixed-length temple arm. An integrated side-

shield is included for added protection. Temples also feature

3m pressure diffusion temple technology which helps diffuse

pressure over the ear to enhance frame comfort across a

diverse workforce. This innovative design promotes improved

comfort and security of fit.

• Optical class 1 lens suitable for prolonged use

• Design provides excellent coverage and good field of

vision

• Offers excellent protection against ultraviolet (UV)

radiation

• Lightweight design (18g)

• 3M pressure diffusion temple technology for secure and

comfortable fit

PYRAMEX PMXSLIM

• Dual injected temple design includes soft rubber tips for a

non-slip fit.

• PMXSLIM™ has a slim fit for smaller facial features.

• Soft, adjustable nose piece generates a cushion for all

day comfort.

• Wrap-around, single lens design performs with an

incredible 10-base curve, including side protection that

extends to the temples.

• Meets ANSI Z87.1 high impact requirements

PYRAMEX ACHIEVA

• Innovative, sport style safety spectacle.

• Unique rubber temple tips twist around the temples for a

stylish and secure fit.

• Curved design of lens extends to protect against airborne

particles.

• Built-in brow guard provides additional protection above

the eyes.

• Exceeds ANSI Z87.1 high impact requirements

• Code - SP6510S

EYE

PR

OT

ECT

ION


UVEX PHEOS 9192

• Modern, fashionable safety spectacle design • Duo-spherical lens with Uvex supravision lens coating technology • Rimless spectacles with wide field of vision • Permanent anti-fog on the inside • Extremely scratch-resistant on the outside • Completely metal-free

ELVEX ACER

• Great protection with floating lens design that allows the frame to flex outward to fit a broader range of face sizes.

• Ballistic v0 rated* for impact protection, 7x ANSI Z87+ energy. (4x z87+ impact velocity)

• Broad and soft rubber saddle nose piece for greater comfort and impact protection to prevent slipping.

• Soft, over moulded temples keep eyewear comfortable and secure.• Tested to us military standard mil-prf-31013 impact test.• Lenses: available in clear, amber or grey hard coat, clear and grey with

super-coat™ anti-fog.• Polycarbonate lenses absorbs 99.99% of harmful UV A, B and C, 180-

380nm.• Meets ANSI Z87.1-2010+, CE EN-166.

BOLLÉ RUSH +

The rush + small adopts an ultra-sporty design, is now available in size small, for narrower faces.• Upper protection• Non-slip adjustable bridge• Platinum coating• Co-injected ultra-flexible temples

UVEX U-SONIC GOGGLE 9308 123

• Small, compact low weight goggle• Compatible with other PPE• Ergonomic design with soft flexible components – adapts to any facial

shape• High mechanical strength (b: 120m/s)• Low pressure, wide fully adjustable head strap for excellent wearer

comfort• Indirect ventilation system helps maintain a comfortable climate around

the eyes

HEA

RIN

G P

RO

TEC

TIO

N

UVEX COM4-FIT UNCORDED EARPLUG

With its more compact ergonomic design, the Uvex com4-fit is comfortable for wearers with narrower auditory canals. The Uvex com4-fit has a sealed surface, preventing foreign bodies from penetrating the plug. The soft foam offers real comfort, even when worn for extended periods.

SNR: 33 DB(A) H: 33 DB(A) M: 30 DB(A) L: 29 DB(A)

Benefits overview• Ergonomic shape adapts to the natural shape of the ear canal • Combines optimal comfort with the highest level of protection • X-grip technology reduces expansion pressure and therefore increases wearer

comfort, even when worn for extended periods • Easy insertion and removal • For small to medium ear canals • High visibility colour for easy visual recognition

UVEX COM4-FIT CORDED EARPLUG

With its more compact ergonomic design, the Uvex com4-fit is comfortable for wearers with narrower auditory canals. The Uvex com4-fit has a sealed surface, preventing foreign bodies from penetrating the plug. The soft foam offers real comfort, even when worn for extended periods.

SNR: 33 DB(A) H: 33 DB(A) M: 30 DB(A) L: 29 DB(A)

Benefits overview• Ergonomic shape adapts to the natural shape of the ear canal • Combines optimal comfort with the highest level of protection • X-grip technology reduces expansion pressure and therefore increases wearer

comfort, even when worn for extended periods • Easy insertion and removal • For small to medium ear canals • High visibility colour for easy visual recognition

BILSOM 303S FOAM CORDED EAR PLUG - SMALL

A skilled blend of yellow and white polyurethane foam that feels softer in both your hand and in your ear, but does not feel too tight in your ear canal. It is easier to roll-down, and once inserted properly, resists the tendency to back out of the ear canal - ensuring a tight seal for optimal protection. Its smooth, soil-resistant skin prevents the build-up of dirt on the earplug, promoting proper hygiene.

Features• Patented polyurethane foam expands gently in the ear canal, reduces

tendency to back out of the ear canal • Smooth, soil-resistant skin prevents dirt build-up, promote proper hygiene • Tapered bullet-shape design easier to roll-down and insert, adapts more

evenly to shape of the ear canal • Snr 33 ideal for medium/high noise environments

BILSOM 303S FOAM UNCORDED EAR PLUG - SMALL

A skilled blend of yellow and white polyurethane foam that feels softer in both your hand and in your ear, but does not feel too tight in your ear canal. It is easier to roll-down, and once inserted properly, resists the tendency to back out of the ear canal - ensuring a tight seal for optimal protection. Its smooth, soil-resistant skin prevents the build-up of dirt on the earplug, promoting proper hygiene.

Features• Patented polyurethane foam expands gently in the ear canal, reduces

tendency to back out of the ear canal • Smooth, soil-resistant skin prevents dirt build-up, promote proper hygiene • Tapered bullet-shape design easier to roll-down and insert, adapts more

evenly to shape of the ear canal • Snr 33 ideal for medium/high noise environments

HOWARD LEIGHT FUSION CORDED EAR PLUG - SMALL

Fusion multiple-use earplugs use advanced manufacturing technology to deliver a revolutionary combination of all-day comfort and easy handling. Its flexifirm® core ensures easy insertion into the ear canal and a superior fit all day long. Fusion’s patented softflange™ design adjusts perfectly to the ear canal to deliver unmatched comfort and superior attenuation.

Features• Patented dual material design combines firm core for easy handling with soft

flanges for comfort and fit • Flexifirm® stem is easy to grasp, ensuring easy insertion into the ear canal • Softflange™ creates comfortable seal in the ear canal for superior comfort and

protection • Unique detachable nylon cord system adapts to virtually any application


PERFECT FIT LADIES EAR PLUG - SMALL

Earplugs are low pressure which virtually permanently eliminates pressure on the ear canal. Comfortable for long terms use. The band is non toxic, non-irritating and durable. Clean with warm soapy water

SNR 31

Available in corded and un-corded

Minimum order qty applies

HA

ND

PR

OT

ECT

ION

UVEX PHYNOMIC FOAM 60050

The Uvex phynomic foam is an ultra- light all-round safety glove. The aqua-polymer foam coating is extremely flexible, provides good grip and leaves no trace on sensitive surfaces

Characteristics• Excellent dexterity• Excellent dry grip• Extremely breathable• Sizes 6 - 11

UVEX PHYNOMIC WET 60060

The Uvex phynomic wet/wet plus is an all-round safety glove, which is suitable for use in more demanding indoor and outdoor areas ofApplication. The water-repellent aqua-polymer foam coating is particularly suitable for damp/oily working conditions.

Characteristics• Excellent dexterity• Good dry and wet grip• High level of breathability• Water-repellent coating and liner• Size 6 - 11

UVEX PHYNOMIC XG 60070

The Uvex phynomic xg offers the best oil grip in its class. The innovative aqua polymer extra grip foam coating is also particularly flexible and extremely robust.

Characteristics• Excellent dexterity, best oil grip, durable• High level of breathability Uvex pure standard• Free of harmful substances in accordance with oeko-tex® standard 100• Free from all solvents (E.G. dmf, tea), free from catalysts• Dermatologically approved• Sizes 6 - 11

Applications• Precision work• Fine assembly work/assembly work• General maintenance work

UVEX RUBIPOR ERGO E5001BThe Uvex rubipor ergo includes a breathable NBR impregnation. This ensures a pleasant temperature regulated wearing feel, even after long periods (E.G. An entire shift).

Characteristics• Excellent ergonomic fit• Highly flexible• Good dexterity right to the fingertips• High level of breathability• Size 6 - 10

Applications• Fine assembly work• Sorting• Inspection• Product protection


POLYTRIL MIX 2232233Feature• Black polyamide/cotton knitted glove. Rough black nitrile coating on palm and

fingers. Gauge 10. Length : 25,5 cm. • Size 6 – 11

Benefit• Comfort the knitting technique helps to obtain a glove that conforms snugly to

the hand, with good dexterity.• The glove offers maximum comfort and added sturdiness.• The tight knit gives the glove perfect support, limits the penetration of dirt

and offers a good touch. • The ventilated back optimises the glove's breathability.• The knitted and elasticated wrist gives the glove good support.• Resistance the cotton polyamide thread offers excellent comfort and provides

the glove with effective properties against cuts.• The nitrile coating at the palm and fingertips provides outstanding abrasion

resistance and im-permeability to oils.

SAHARA FLEX GRIP

• Black nitrile coating on seamless polyamide liner.• Ergonomic design and comfort.• Synthetic gloves outperform general purpose leather gloves.• The nitrile coating at the palm and fingers provides outstanding abrasion

resistance and im-permeability to oils.• The tight knit gives the glove perfect support, limits the penetration of dirt

and offers better dexterity and optimum handling.• Super grip with rough nitrile texture.• Ventilated backing proves the gloves breathability• Sun fresh offers chemically treated fabrics which allows for breathable and

fresh comfort, retards the growth of mould and bacteria, and negates the effects of perspiration.

• Launderable with standard detergent.• Available in sizes 7, 8, 9, 10, 11

HA

ND

PR

OT

ECT

ION

UVEX UNIFLEX U7020

• Suitable for any applications where risk exists of general injury.• Allows good grip in wet, oily, greasy conditions.• Tough and long lasting nitrile coating.• Palm dip ensures that hand breathes to an extent.• Nitrile coated for oil and grease resistance.• Sizes: 7-10• Industries:

• Building.• Construction.• Railways and sheet metal.• Metal and plastics.• Forestry industries.


UVEX UNIPUR 6634

• Moisture-proof NBR safety glove for mechanical applications outdoors• Very good abrasion resistance with the polyamide liner and NBR coating• Good grip in damp areas• Good tactile feel• Good fit• Highly flexible• Sizes 7-11Areas of application:• Precision assembly work• Precision work• General repair work• Maintenance

UVEX UNILITE 6605Ideal for maintenance in mining, engineering and other heavy industries where good grip in wet, oily or greasy conditions is paramount. The seamless 15 gauge nylon liner provides a high level of comfort, along with flexibility and durability. Second skin fit provides maximum dexterity in diverse applications. Uvex unilite6605 NBR foam coating provides excellent grip, while keeping the hands cool and dry thanks to enhanced breathability. The high degree of flexibility provided helps to reduce hand fatigue.

Benefits overview• Sizes: 6-10• Flexible seamless glove material• Outstanding dexterity• Good grip in wet, oily and greasy conditions• High abrasion resistance• Good mechanical strength• En 388 (4122)

UVEX UNILITE 6610F

Features:• Flexible• Outstanding dexterity• Full nitrile butaden rubber (NBR) foam coating• Good grip in wet, oily and greasy conditions• High abrasion resistance• Good mechanical strength• Complies with EN 388 (4121)• Size : 6-11

Applications:• Ideal for use in wet, oily or greasy tasks where grip is needed and areas and

tasks that require high abrasion resistance with good grip• Suitable for use in engineering, maintenance and other heavy industries

UVEX UNIDUR 6649These mottled grey safety gloves are ideal for both clean and dirty environments. The HPPE fibre ensures good cut protection (level 3).

Characteristics• High flexibility• Outstanding dexterity• High abrasion resistance• Good cut resistance• Highest level of durability – a longer lasting solution for challenging

environments• Sizes: 7-11

Applications• Metal industry• Automotive industry• Packaging

UVEX UNIDUR 6659

The HPPE and glass fibres of the Uvex unidur 6659 foam ensure very high cut protection. These mottled grey safety gloves are particularlyDirt-resistant and the NBR foam coating protects against moisture.Characteristics• Excellent dexterity• High abrasion resistance• High flexibility• High resistance time• Excellent cut protection• Sizes: 7-11Applications• Automotive industry• Metal work industry• Packaging

HA

ND

PR

OT

ECT

ION


UVEX C500 60492Uvex c500 foam and c500 wet

Characteristics• Patented Uvex bamboo twinflex® technology• Innovative softgrip coating• Very high cut protection (cut 5)• Highest-wearing comfort due to Uvex climazone• Outstanding tactile feel• High abrasion-resistance• Sizes: 7-11Applications• Metal industry• Automobile industry• Transportation work• Assembly work• Glass industry• Maintenance and repair• Shipping/logistics

UVEX C300 WET 60544

The Uvex c300 safety gloves range sets new standards in protection, comfort, flexibility, dexterity and economy. Our new high-tech product concept with cut level 3 combines all of these properties.

• Patented Uvex bamboo twinflex® technology• Innovative softgrip coatings• High cut resistance level 3• Extremely comfortable thanks to Uvex climazone• Excellent dexterity• High abrasion-resistance• Flexible• Silicone-free according to imprint test• Certified according to oeko-tex standard 100• Length: approx. 27 cm• Sizes: 7, 8, 9, 10

UVEX IMPACT 1 60598The perfect glove for the oil and gas industry: Uvex impact 1. Designed for rugged use, with velcro cuff, extra-padded palm. Back of the hand tpr-protectors protect bones and knuckle joints; same applies to the reinforcements on the knuckle joints. High cut resistance and excellent grip properties make the Uvex impact 1 the perfect glove for the toughest environments.Characteristics• Flexible and secure grip• Exceptional abrasion and cut resistance• Knuckle protection• Excellent fit• Sizes: 7-10Applications• Tasks with extreme mechanical stress• Mining• Drilling• Tool pushing• Oil- and gas-industry• Heavy construction

UVEX RUBIFLEX XG35BThe new, lightweight chemical-resistant safety glove with innovative Uvex xtra grip technology combines protection and grip with exceptional comfort and flexibility. Supported chemical protection safety gloves offer outstanding wearer comfort through comfortable top-quality cotton interlock lining, which regulates temperature inside the gloves.Characteristics• Exceptional dry and wet grip• Multilayer design for excellent resistance time• Ergonomic fit• Extremely high flexibility• Excellent resistance to many chemicals• Ultra lightweight design• Cotton lining for superior water vapour absorption• Sizes: 7-11Applications• Chemical industry• Automotive industry• Laboratory work

UVEX PROFAPREN CF33

High-quality unsupported chloroprene safety glove for use in protecting against a broad spectrum of different chemicals. The silicone-free safety glove provides excellent properties against chemical and mechanical risks.Characteristics• Good combination of flexibility and strength• Resistant to many chemicals and solvents• Sizes 7-10Applications• Chemical industry• Painting/coating• Metal work (cleaning)

UVEX PROFASTRONG NF33

This sensitive chemical protection safety glove is suitable for a wide range of applications and has been particularly proven when working with acids and alkalis.Characteristics• Anatomic shape• Good dexterity• Good grip for wet surfaces• Outstanding abrasion resistance• Sizes: 7-10Applications• Automotive industry• Chemical industry• Food industry• Laboratories• Printing industry

HA

ND

PR

OT

ECT

ION


UVEX PROFAFLEX PB40GR

This very strong chemical safety glove is highly versatile. The PVCCoating provides a good chemical resistance against mineral oils andAlso offers a perfect grip.

Characteristics• High abrasion resistance• High flexibility at low temperatures• Resistant to mineral oils• Size 9-10

Applications• Chemical industry• Mineral oil industry

DROMEX NITROLITE GLOVE

Description:Dromex nitrolite grey nitrile coating on white shell.

Item code:Nitrolite

Sizes:7 to 11

DROMEX ANTI-STATIC GLOVE

Description:The Dromex antistatic glove is manufactured out of a composite carbon & nylon seamless shell coated with a durable polyurethane (PU) on the palm and finger tips.

Item code:Pu2007

Sizes:7-10

DROMEX GREEN NITRILE GLOVE

Dromex green nitrile EN approved category III - industrial chemical gloves EN388 & 372

Available from size 7 – 11

DROMEX SUPERLITE GLOVE

Description.Superlite black micro foam coated on a blue shell.

Item code.Superlite

Sizes.8 -11

GOATSKIN VIP LEATHER

Dromex keystone VIP driver & TIG welders glove. A fully grained shirred goatskin leather glove with red trimming.

Available from sizes 7-12

HA

ND

PR

OT

ECT

ION

DROMEX MIIZU GLOVE MIIZT300HI

Description.Hi-Viz gloves: seamless green Hi-Viz gloves - black latex micro palm coated.

Item code.Miizu300hi

Sizes.8-11


DROMEX HOUSEHOLD GLOVE – 1000/Y

Description:Yellow economy household gloves.

Item code:1000y

Sizes:Medium & large

DROMEX NITRILE SUPER LITE GLOVE – NITROLITE

Description:Dromex nitrolite grey nitrile coating on white shell.

Item code:Nitrolite

Sizes:7 to 11

DROMEX GOATSKIN VIP LEATHER CUFF GLOVE – GGOAT-15CMC

Description:Dromex keystone VIP driver & TIG welders glove. A fully grained shirred goatskin leather glove with 15cm leather chrome cuff.

Item code:GGOAT/15CMC

Sizes:8 to 10

DROMEX BLACK MAX GLOVE

Description.Black max seamless black inspectors gloves - PU palm coated.

Item code.Pu2001b

Sizes.7-10

GRIPPER CRINKLE RUBBER PALM GLOVE – 1412A

The gripper is a seamless poly cotton yellow shell that is palm dipped in a blue textured crinkled rubber.

Sizes.9-10

HA

ND

PR

OT

ECT

ION


TAEKI5 HEAT & CUT RESISTANT DOTTED GLOVE – 56M-Y-2D

Taeki5™ super grip PVC double dotted coated glove.

Sizes.7-10

TAEKI5 HI VIZ NITRILE COATED GLOVE – 58SC

Taeki5™ hi viz seamless heat resistant & cut resistant glove with nitrile coating and safety cuff.

Sizes.9-10

TAEKI5 MILITARY CAMO GLOVE – 52J

Taeki5™ military camo seamless heat resistant & cut gloves with PU palm coated.

Sizes.8-11

TAEKI5 HCT IMPACT GLOVE – 52LSTPV

Taeki5™ high impact, abrasion, cut & tear, puncture, heat resistant & cold resistance. High grip power with enhanced dexterity and flexibility capabilities. A seamless construction with a velcro closure for enhanced fit.

Sizes.8 to 10

TAEKI5 HCT CHEMICAL GLOVE – 57H201PLUS

Taeki5™ seamless heat resistant & cut & chemical resistant gloves with HCT.

Sizes.8-10

TAEKI5 HIGH HEAT & CUT RESISTANT GLOVE – 55H2

Description.Taeki5™ seamless heat resistant & cut resistant gloves solar.

Sizes.8-10

HA

ND

PR

OT

ECT

ION


TAEKI5 HEAT & CUT RESISTANT FOOD GLOVE – 55LF

Taeki5™ high performance heat & cut resistant food series.

Sizes.7 to 11

DYTEK SEAMLESS CUT RESISTANT GLOVE – DYTEC3

Dytec3™ seamless cut level 3 resistant gloves - black PU palm coated.

Sizes.8 to 11

MIIZU HI VIZ THERMAL GLOVE – MIIZULFM4001W

Dromex specialised hand protection Miizu range are double seamless Hi-Viz green gloves, with black latex micro palm coating.

Sizes.8 to 10

HOUSEHOLD RUBBER GLOVES

Yellow – 10142/YBlue – 10142/B

18mil (0.45mm) flock lined household 30cm rubber glove.

Sizes.Small to large

DROMEX MACH-5 GLOVE

Mach-5 microfiber fabric with anti slip palm, spandex TPR pad on back with a reinforced anti-slip thumb patch.

Sizes.9 & 10

Quantity.

DROMEX BLUE NEOPRENE GLOVE – 322C

Description:Dromex blue neoprene dipping over yellow latex EN approved category III -industrial chemical gloves.

Item code:322c

Sizes:7 to 10

HA

ND

PR

OT

ECT

ION


INSPECTOR SEAMLESS WHITE GLOVE – PU2001

Inspectors seamless white inspectors gloves - PU palm coated.

Sizes.7 to 11

DROMEX MACH-4 GLOVE

Mach-4 microfiber fabric with anti slip palm, spandex TPR pad on back with a reinforced anti-slip thumb patch.

Sizes.8-12

DROMEX MACH-6 GLOVE

Dromex Mach 6 black meta neoprene liquid proof palm, orange/reflective back with black/orange impact knuckle guard and velcro closing.

Sizes.8 to 11

DROMEX MACH-777 GLOVE

Black nitrigrip palm with vibro-impact reinforced palm, grey back with black/lime impact knuckle guard with 7cm reflective gauntlet cuff.

Sizes.7-11

FLEXI TOUGH NITRILE GLOVE – DH0911A

Premium yellow actifresh, flexi tough, nitrile palm coated knitted wrist glove.

Sizes.8-12

DROMEX GREEN PARROT GLOVE – G5

Dromex keystone VIP driver glove. A fully grained shirred cow leather glove with red trimming..

Sizes.Small to x-large

HA

ND

PR

OT

ECT

ION


DROMEX PIGSKIN VIP GLOVE - GTIG

Dromex keystone VIP driver & TIG welders glove. A fully grained shirred pigskin leather glove with red trimming..

Sizes.8-12

DROMEX NITRIFLEX GLOVE – NITRIFLEX-PC

Description:Nitriflex black sanitized palm nitrile coated on a grey shell.

Item code:Nitriflex-pc

Sizes:8-11

DROMEX INSPECTORS NYLON GLOVE – GNYLON

Description:Inspector seamless white nylon 13gg inspectors gloves.

Item code:GNYLON-W

Sizes:8-10

DROMEX MACH CUT GLOVE – MACH100WP

Description.Mach cut level 5 impact & waterproof, high abrasion and puncture resistance. High grip power with enhanced dexterity and flexibility capabilities.

Item code.MACH100WP

Sizes.8 to 11

DROMEX MACH CUT GLOVE – MACH-030WP

Description:Mach cut level 5 impact & waterproof and high abrasion resistance. High vibro grip with enhanced dexterity and flexibility capabilities.

Item code:MACH030WP

Sizes:8 to 12

DROMEX CHAIN MAIL GLOVE – RTCMG-01

Description:Dromex chain mail 5 finger ambidextrous gloveSold per piece

Item code:Rtcmg-01

Sizes:xs - xl

HA

ND

PR

OT

ECT

ION


TAEKI5 SEAMLESS HEAT & CUT RESISTANT GLOVE – 55M-Y

Taeki5™ seamless heat resistant & cut resistant gloves.

Sizes.7-10

MAXIFLEX ULTIMATE 34-876 GLOVE

Maxiflex ultimate 34-876 fully coated knitwrist glove

General description:Patented micro foam coating on a seamless knitted liner

Compliances:Gloves conform to the requirements of PPE directive 89/686/EEC and to the European standards EN 420: 2003 + A1: 2009, EN 388: 2003.

Sizes:6 - 11

MAXIFLEX ULTIMATE 42-874 AD-APT GLOVE

Maxiflex ultimate with ad-apt 42-874 palm coated knitwrist glove



Sizes:8 - 11

MAXIFLEX ENDURANCE 34-844 GLOVE

Maxiflex endurance 34-844 palm coated knitwrist glove

General description:Patented micro foam coating with micro dots on a seamless knitted liner.


Sizes:8 - 11

MAXIFLEX ENDURANCE 34-847 GLOVE

Maxiflex endurance 34-847 drivers style knitwrist glove

General description:Patented micro foam coating with micro dots on a seamless knitted liner.


Sizes:6 - 11

DROMEX IMPACT GLOVE – 52LSTPV

Description:Taeki5™ high impact, abrasion, cut & tear, puncture, heat & cold resistance. High grip power with enhanced dexterity and flexibility capabilities. A seamless construction with a velcro closure for enhanced fit.

Item code:52lstpv

Sizes:8 to 11

HA

ND

PR

OT

ECT

ION


MAXIFLEX ELITE 34-274 GLOVE

Maxiflex elite 34-274 palm coated knitwrist glove

General description:Patented micro foam coating on a seamless knitted liner.


Sizes:8 - 11

MAXIFLEX ACTIVE 34-814 GLOVE

Maxiflex active 34-814 palm coated knitwrist glove



Sizes:6 - 9

MAXIFLEX CUT 34-8743 GLOVE

Maxiflex cut 34-8743 palm coated knitwrist glove

General description:Patented micro foam coating on a seamless knitted liner. Cut level 3

Compliances:Gloves conform to the requirements of ppe directive 89/686/eec and to the european standards en 420: 2003 + a1: 2009, en 388: 2003.

Sizes:8 - 11

HEXARMOR RIG LIZARD 2025 GLOVE

• Superfabric®* brand material palm provides ANSI/ISEA cut level a6 resistant form some of the highest cut protection available in the industry (interior layer)

• Durable TP-X+® palm maintains the highest levels of abrasion resistance and the highly specialized grip works on even the most saturated situations

• Back-of-hand IR-X® impact exoskeleton™ with high-flex design keeps hands safe from smash & impact hazards

• Reinforced seams add durability and extend glove life• Slipfit® cuff closure for a secure and comfortable fit• Hi-vis colour scheme provides increased visual awareness on the jobsite• Launderable

Sizes:5/ xxs – 12/3xl

HEXARMOR RIG LIZARD THIN LIZZIE 2090X GLOVE

• Knit: 13-gauge HPPE and glass blend shell provides 360° of ANSI/ISEA cut level a4 protection

• Coating: flexible sandy nitrile palm coating provides superior grip and abrasion resistance

• Back-of-hand IR-X® impact exoskeleton™ with high-flex design keeps hands safe from smash & impact hazards

• Reinforced thumb crotch patch for increased durability• Knit wrist helps prevent dirt and debris from entering the glove• Launderable

Sizes:5/XXS – 12/3XL

HEXARMOR EXT RESCUE BARRIER 4014 GLOVE

• Interior layer of superfabric® brand material in the palm provides ISEA level a8 cut resistance for some of the highest cut-resistance available on in the industry.

• Waterproof h2x™ barrier lining passes ASTM F1670/F1671 requirements and meets osha bloodborne pathogen standards (29cfr 1910.1030).

• Interior liner is sewn-in, so it won’t pull out when you remove the glove• Durable TP-X® palm material is highly abrasion-resistant, and provides a

strong grip.• Superior back-of-hand impact protection prevents smash injuries.• Reinforced index finger and thumb saddle extends glove life.• Slipfit® cuff with velcro® closure provides great fit and easy on and off

between calls.• Machine washable.

Sizes:5/xxs – 12/3xl

HA

ND

PR

OT

ECT

ION


HEXARMOR CHROME SERIES CUT A8 360° 4023 GLOVE

• Made with superfabric® brand material for some of the highest cut-resistance available in the industry, with level a8 cut resistance (in noted enhanced areas)

• TP-X® palm enhances grip in dry and light oil applications while providing dexterity to utilize tools and equipment

• 360° level a8 cut resistance• Launderable


HEXARMOR POINTGUARD ULTRA 4045 GLOVE

• Highest needlestick resistance available provided by the layering of superfabric®* brand material

• Tested using actual 25 gauge needles against ANSI/ISEA 105 standard• Airprene cuff with velcro® closure for secure fit• Back-of-hand knuckle padding for incidental bumps & impacts• Silicone palm patter for enhanced durability and grip• Form-fitting design for increased dexterity and comfort• Airmesh™ breathable back of hand with airprene wrist band and velcro®

closure• Launderable


HEXARMOR SHARPS MASTER HV 7082 GLOVE

Highest needlestick resistance available provided by the layering of superfabric® brand materialTested using actual 25 gauge needles against ANSI/ISEA 105 standardHighest level of cut resistance on noted enhanced areas, ANSI/ISEA level A9 and CE level 5Single-glove needle solution with incredible dexterity and comfortFlat nitrile three-quarter knuckle dipLaunderable


HEXARMOR SHARPS MASTER II 9014 GLOVE

• Highest needlestick resistance available provided by the layering of superfabric® brand material

• Tested using actual 25 gauge needles against ANSI/ISEA 105 standard• Highest level of cut resistance on noted enhanced areas, ANSI/ISEA level a9

and CE level 5• Single-glove needle solution with incredible dexterity and comfort• Wrinkle rubber palm coating with actifresh™ anti-microbial treatment


HEXARMOR UGLY MUDDER 7310 GLOVE

• PVC-nitrile coating provides a liquid-resistant barrier while also providing enhanced grip and abrasion resistance

• Full back-of-hand encapsulated impact protection• High temperature, complete curing ensures optimized plasticizing and cross-

linking• Textured particle palm for exceptional oil grip and added durability• Safety cuff for easy on and off• Certified for chemical resistance against methanol, sulphuric acid 96%, and

sodium hydroxide 40%• Launderable


ZEPHIR VE210 PINK LATEX GLOVE

• Latex with cotton flock lining. • Length: 30 cm. • Thickness: 0,38 mm.

Sizes:6/7, 7/8, 8/9, 9/10

HA

ND

PR

OT

ECT

ION

TAEKI5 59YSP HEAT & CUT RESISTANT GLOVE

Description.Taeki5™ seamless heat resistant & cut resistant, super blue latex coated palm grip glove.

Item code.59ysp

Sizes.8 - 11


DROMEX NITRIFLEX GLOVE

Description.Nitriflex black sanitized palm nitrile coated on a grey shell.

Item code.Nitriflex

Sizes.7-11

TAEKI5 #57 HEAT & CUT RESISTANT GLOVE

Description.Taeki5™ seamless heat resistant & cut grey shell with black nitrile palm coated.

Item code.57#

Sizes.7-11

OT

HER

• Parachute type full body harness• Super comfort• Light weight• Unisex friendly & available in pink• Adjustable on the leg straps• Adjustable shoulder straps• Padded dorsal d’ring in a frame

preventing tangling• 44mm webbing – UV treated • 44mm black webbing chest strap• Regular & oversize available• D-rings on waist for leg straps• Manufactured to SANS 5061

SPIDERWEBB GECHO BETA LADIES HARNESS LADIES FULL BODY HARNESS WITH DOUBLE LANYARD

• Ladies full body harness with double lanyard

• Parachute type full body harness• Super comfort• Light weight• Adjustable on the leg straps• Adjustable shoulder straps• Padded dorsal d’ring


LADIES PADDED CAP LAMP BELT

• Content can be packed as per requirements

LADIES SANITARY POUCHES

OT

HER

• Shewee• Zip-lock bag

• Colours: clear, opaque

SHEWEE MEDICAL SHEWEE STANDARD

• Shewee• Zip-lock bag • (in cardboard box)

• Colours: black, freedom purple, bright blue, powder pink, pure white, pace nato, aqua, desert sand, lilac, pumpkin orange


PEEBOL

• Shewee• Plastic case• Extension pipe

• Colours: black, freedom purple, bright blue, powder pink, pure white, pace nato, aqua, desert sand, lilac, pumpkin orange

SHEWEE EXTREME

• A small pouch that is convenient to pee into.

• It contains a silica gel similar to that found in a nappy, which then absorbs the urine and there is no smell.

HEA

D P

RO

TEC

TIO

NNIKKI HARD HAT WITH RATCHET

Lightweight abs plastic offers excellent rigidity and protection, air vents that can be closed and opened with just a turn of the hand, ultra-violet inhibitor protects and extends life of helmet, advanced permasweat breathable sweatband, one handed rachet adjustable shock-absorbing suspension quick-fit, high dielectric strength/ electrical insulation, 4 point lightweight lining with soft absorbent crown and sweatband, fully adjustable to head sizes 50-64cmHigh visibility rear insert for added safety


REFELECTIVE HARD HAT BRIM WITH NECK FLAP

Reflective hard hat brimmed sun protector (brimmed hat that attaches to a hard hat with neck protector)

ELASTICATED NECK PROTECTOR

Reflective sun elasticated neck protector for hard hat

V-GARD HARD HAT WITH FASTRAC LINER

V-gard protective caps and hats consist of a polyethylene shell and a fastrac ratchet suspension system working together as a protection system. V-gard headwear features advanced styling and is a standard size (6 1/2" – 8"). V-gardcaps and hats meet or exceed the applicable requirements for a type i helmet (top impact) as outlined in ANSI Z89.1 1997,class e and g.

NIKKI 2 HARD HAT

High dielectric strength/ electrical insulation, lightweight abs plastic offers excellent rigidity and protection, air vents, ultra-violet inhibitor protects and extends life of helmet, anti-glare peak, advanced permasweat breathable sweatband, chin strap attachment point, contouring rain channel, 4 point lightweight lining

LADIES HAIR BUFF

Ladies hair buff

Assorted colours

FOO

T P

RO

TEC

TIO

NSISI VENICE 51002 SHOE

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Full grain leather upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sans 20345• Antistatic• 02 – 08• Black• STC

SISI NICOLE 54001 SHOE

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Four pair eyelet lace-up• Full grain leather upper• Padded around the collar for extra comfort• Kevlar midsole option available• These shoes are based on a male mould to accommodate women with

wider feet• Sans 20345• Antistatic• 02 – 09• Black• STC

SISI PARIS 51003 SHOE

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Full grain leather upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Elastic side gussets for additional comfort• Kevlar midsole option available• Sans 20345• Antistatic• 02 – 08• Black• STC

SISI MADONNA 51004 SHOE

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Four pair eyelet lace-up• Leather upper• Padded collar and tongue for additional comfort• Standard with a woollen top sock for added comfort• Sans 20345• Antistatic• 03 – 08• Black• STC


SISI YVONNE 550013 BOOT

Specifications• PU/ PU sole• EN/ISO 20345• 03 – 08• Black• STC

FOO

T P

RO

TEC

TIO

N


BOVA SELENA 55001 SHOE

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Four pair eyelet lace-up• Leather upper• Padded collar for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sans 20345• Antistatic• 03 – 08• Black• STC

BOVA ANGELINA 55003 SHOE

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Five pair eyelet lace-up• Leather and synthetic upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sabs test results pending at time of print• Sans 20345• Antistatic• 03 – 08• Black• STC

BOVA JENNIFER 55005 SHOE

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Five pair eyelet lace-up• Leather upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sans 20345• Antistatic• 03 – 08• Black• STC

BOVA REESE 55006 BOOT

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Seven pair eyelet lace-up• Leather upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sans 20345• Antistatic• 03 – 08• Black• STC

BOVA CORAL 53002 SHOE

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Four pair eyelet lace-up• Full grain leather upper with either black or pink suede overlay• Padded quarter for additional comfort• Standard with a woollen top sock for added comfort• Sans 20345• Antistatic• 02 – 09• Black, black/grey• STC

BOVA COURT 53001 SHOE

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Slip on for ease of use• Full grain leather upper• Padded quarter for additional comfort• Standard with a woollen top sock for added comfort• Sans 20345• Antistatic• 02 – 09• BLACK• STC

FOO

T P

RO

TEC

TIO

N


BOVA TYRA 55012 SHOE

Specifications• Dual density PU sole• Heat resistant up to 95° Celsius• Velcro straps for ease of fastening• Full grain leather upper• Padded collar and tongue for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• Sans 20345• Antistatic• 03 – 08• Black• STC

BOVA CATE 54002 BOOTSpecifications• Dual density PU sole• Heat resistant up to 95° Celsius• Three pair metal d-ring lace-up with one pair metal hooks• Full grain leather upper• Padded tongue and collar for extra comfort• Standard with a woollen top sock for added comfort• Kevlar midsole option available• These shoes are based on a male mould to accommodate women with

wider feet• Sans 20345• Antistatic• 02 – 09• Black• STC

BOVA OPAL 53003 BOOT

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Seven pair gunmetal brass d-ring lace-up• Full grain leather upper• Padded tongue for extra comfort• Standard with a woollen top sock for added comfort• Sans 20345• Antistatic• 03 – 09• Black, brown• STC

BOVA SYDNEY 51005 BOOT

Specifications• Single density PU sole• Heat resistant up to 95° Celsius• Standard with a woollen top sock for added comfort• Full grain leather upper• Engineered with pull strap for ease of pulling the shoe on• Elastic side gussets for additional comfort• Sans 20345• Antistatic• 03 – 08• Black, brown

DOT LADIES NEON SHOE

Ladies stylish safety shoe with superior comfort design• Genuine split buffalo leather upper• Super comfort removable anti-static anti-fungal inner sole• Lightweight and flexible dual density PU sole• Steel toe cap with impact protection of 200 joules• Shock absorbent heel• Heat resistant to 90º Celsius• Wider cut for added comfort• Feminine design• Available in sizes 2-8

ELLA DAISY BOOT

Daisy

Size: 2-8 black with pink CE EN ISO 20345

A slip on style safety boot for convenient wear. The daisy offers secure and stylish comfort.

• Genuine smooth split buffalo leather

• Dual density PU sole

• Extra padded collar for comfort

• Steel toe cap

FOO

T P

RO

TEC

TIO

N


REBEL SHEBA RE682 IMAN SHOE

Specifications• Micro-fibre upper with reinforced backguard• Dual density polyurethane sole• Round metal eyelets• Black & pink tailbrelle mesh and micro-fibre lining• 200j steel toe cap• Eva foam with mesh top lining footbed• Product code: RE682• Colour: black• Sizes: 2-8

REBEL SHEBA RE683 KITO SHOE

Specifications• Micro-fibre upper with3collar, easy-elasticated slip on design• Dual density polyurethane sole• Black & pink tailbrelle mesh and micro-fibre lining• 200j steel toe cap• Eva foam with mesh top lining footbed• Product code: re683• Colour: black• Sizes: 2-8

REBEL SHEBA RE941 LIGHT INDUSTRIAL SHOE

Specifications• Upper consists of grey oxford mesh; TPU trim and a grey nubuck back

guard• Eva inner sole and rubber outsole• Fabric loops with one round metal eyelet• Black & pink tailbrelle mesh lining• 200j steel toe cap• Ultra-thick PU foam footbed with mesh top lining• Product code: RE941• Colour: black• Sizes: 2-8

REBEL SHEBA RE974 ZARI SHOE

Specifications• Micro-fibre upper, PU collar with velcro strap overlay• Dual density polyurethane sole• Black & pink tailbrelle mesh and micro-fibre lining• 200j steel toe cap• Eva foam with mesh top lining footbed• Product code: re974• Colour: black• Sizes: 2-8

ELLA JASMINE BOOT

Jasmine

Size: 2-9 Black with Pink CE EN ISO 20345

Absolute comfort and safety. The Jasmine offers extra collar padding for

support, along with full ankle height lacing for security. You'll never want

to step on site without them.

• Genuine Nubuck Split Buffalo Leather

• Ankle High

• Extra Padded collar for comfort

• Dual Density PU sole

• Steel toe cap

ELLA LILY SHOE

Lily

Size: 2-8 Black with pink CE EN ISO 20345

While providing an extra soft breathable inner lining and low cut

comfort, the Lily offers a light weight experience for many more

comfortable hours on the feet.

• Genuine Nubuck Split Buffalo Leather

• Ankle High

• Extra Padded collar for comfort

• Dual Density PU sole

• Steel toe cap

FOO

T P

RO

TEC

TIO

N


FRAM 3915 LADIES BOOT

Fram ladies 3915 chukka boot with new widened last for extra comfort

Ideal for use in areas where oils and solvents occur

• Buffalo side leather upper• Dual density PU sole• 200 joules toe cap• Sizes: 2-8• Black

Conforms to EN 345-s1

FRAM 3905 LADIES SHOE

Fram ladies 3905 chukka shoe with new widened last for extra comfort

Ideal for use in areas where oils and solvents occur

• Buffalo side leather upper• Dual density PU sole• 200 joules toe cap• Sizes: 2-8• Black

Conforms to EN 345-s1

STIMELA XP GUMBOOT WITH WIDENED CALF

A metal free heavy duty knee length PVC mining gumboot with wide calf insert (for very large calves) with safety toe protection offering a textile anti-penetration midsole and a fully integrated metatarsal protector. 2.75kg average weight, hard wearing, excellent grip and sole support

Sizes: 04 - 13

STIMELA XP METAL FREE GUMBOOT

A metal free heavy duty knee length PVC mining gumboot with safety toe protection offering a textile anti-penetration midsole and a fully integrated metatarsal protector. 2.75kg average weight, hard wearing, excellent grip and sole support

Sizes: 04 - 13

REBEL SHEBA RE129 NALA BOOT

• Specifications• Micro-fibre upper, with reinforced backguard• Dual density polyurethane sole• Black metal eyelets with one set of fabric loops• 200j steel toe cap• Eva foam with mesh top lining footbed• Product code: re129• Colour: black• Sizes: 2-8

REBEL SHEBA RE940 THULI BOOT

Specifications• Micro-fibre upper, reinforced backguard, high durability elastic, easy

“pull on” tabs• Dual density polyurethane sole• Black & pink tailbrelle mesh and micro-fibre lining• 200j steel toe cap• Eva foam with mesh top lining footbed• Product code: re940• Colour: black• Sizes: 2-8

FOO

T P

RO

TEC

TIO

N


GUMBOOT FUR-LINER

For added comfort and warmth in cold environments.

HI-TEC CUSHION FOOT LONG/ SHORT SOCK

Constructed with extra cushioning on toe and heel for added comfort. The HI-TEC exploration sock provides long lasting comfort with features that include a rib-top which prevents the sock from slipping down and excellent protection.• Reinforced toe and heel for added durability• Rib-top ensures that socks stay up and unwanted dirt does not

get in• Relaxed Elastane welt insert for minimum leg pressure and

maximum comfort• 85% Cotton; 8% Spandex; 7% Elastane

SISI ANKLE SOCK

The socks are treated with a Ruco Bach AGP anti-microbial silver based technology which utilizes nano particles of silver chloride. This same compound is applied to the latest wound dressings.

• 95% of bacteria is killed within two hours• Comfort to the wearer, as the socks do not lead to irritation of sensitive skin• Harmless to normal skin flora• Environmentally-friendly• “Antistatic” fiber refers to the anti-static silver-coated cotton stripes which are knitted

into the socks.

Benefits:The anti-static fiber conducts electricity away from the body, through the sock and into the shoe. The anti-static effect is permanent and does not diminish over time

BIOGUARD CUSHION FOOT GOLF HOSE

Bio guard “Foot Fresh” Knee Length Golf Hose Cushion Foot sock

GUMBOOT INNERSOLE

• The Energizer Woolen Insole is made from highly absorbent wool and treated with an Ultra-Fresh DM-25-WP process.

• This has the advantage of fighting fungal and bacterial infections while minimizing conditions such as Athlete’s Foot.

• Sizes: UK 5 – 12

BOOT/ SHOE INNERSOLE

All Sisi footwear comes standard with an energizer top sock that is made from a combination of polyester and wool. It also highly resistant to abrasion allowing it to maintain its shape through the constant rubbing of the foot. Wool is a natural insulator that keeps one cool in summer and warm in winter and offers natural anti-microbial properties, killing off bacteria and reducing foot odours. All our top socks are removable and can be easily cleaned and dried.

All our top socks have further been treated with ultra-fresh to enhance the anti-bacterial properties of the material.

Our top socks feature EVA foam inserts on both the ball and heel area to enhance the comfort to the wearer and increase shock absorption when walking.

WO

MEN

IN

MIN

ING

CONTACT DETAILS

Tel: 011 760 2185

Fax: 011 760 3904

[email protected]

[email protected]

www.saharaworkwear.com

Documents

A T A PROTECTIVE GEAR