Embed Size (px)
Citation preview
AAMA 507-12 THERMAL PERFORMANCE REPORT
Rendered to:
TUBELITE, INC.
TYPE: Glazed Wall System
Report No:
Report Date:
E6659.01-116-45
7/22/2015
SERIES/MODEL: TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) -
Dual Glazed
130 Derry CourtYork, PA 17406
p. 717.764.7700f. 717.764.4129
www.archtest.com www.intertek.com/building
Simulation Date:
Simulation Specimen Description:
Material Finish: Painted Aluminum
Project Summary:
E6659.01-116-45
Report Date: 7/22/2015
AAMA 507-12 THERMAL PERFORMANCE REPORT
Reference Documents:
Rendered to:
TUBELITE, INC.
4878 Mackinaw Trail
Architectural Testing, Inc., a subsidiary of Intertek (Intertek-ATI), was contracted by Tubelite,
Inc. to provide U-Factor and Solar Heat Gain Coefficient thermal performance ratings on the
TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed Glazed Wall
System. The thermal performance ratings were determined in accordance with AAMA 507-12,
Standard Practice for Determining the Thermal Performance Characteristics of Fenestration
07/22/15
Reed City, Michigan 49677
Report No:
Series/Model: TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed
Type: Glazed Wall System
AAMA 507-12, Standard Practice for Determining the Thermal Performance
Characteristics of Fenestration Systems Installed in Commercial Buildings
ANSI/NFRC 100-2014, Procedure for Determining Fenestration Product U-Factors
ANSI/NFRC 200-2014, Procedure for Determining Fenestration Product Solar Heat Gain
Coefficient and Visible Transmittance at Normal Incidence
Configuration: Two vision lites separated by one intermediate vertical
Drawing Reference:
Frame Material: Aluminum Thermally Broken Framing System
Specimen Size: 2000mm wide by 2000mm high (78-3/4" by 78-3/4")
Tubelite Drawing TU400 Ultra Thermal CW Specimen 2 - Dual
Glazed Thermal Testing
130 Derry CourtYork, PA 17406
p. 717.764.7700f. 717.764.4129
www.archtest.com www.intertek.com/building
E6659.01-116-45
Page 2 of 10
Tubelite, Inc.
System U-Factor vs. Percentage of Vision Area
Vision Area / Total Area (%)
Note: 1 inch Overall - Dual Glazed Glass (0.48-0.20 COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror (0.18-0.10 COG)
with Aluminum Spacer
Syste
m U
-Facto
r (B
tu/h
∙ft2
∙ºF
)
TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed - Glazed Wall System
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
0.100.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
707580859095
COGU-Factor
E6659.01-116-45
Page 3 of 10
Tubelite, Inc.
System SHGC vs. Percentage of Vision Area
Vision Area / Total Area (%)
System VT vs. Percentage of Vision Area
Vision Area / Total Area (%)
Syste
m S
HG
CS
yste
m V
T
TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed - Glazed Wall System
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
707580859095
COG SHGC
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
707580859095
COG VT
E6659.01-116-45
Page 4 of 10
Tubelite, Inc.
11 0.28 0.35
9 0.32 0.38
10 0.30 0.37
7 0.36 0.42
8 0.34 0.40
5 0.40 0.45
6 0.38 0.43
3 0.44 0.48
4 0.42 0.47
1 0.48 0.52
2 0.46 0.50
0.22
0.20
0.18
Size Specific U-Factor Matrix*
Glazing Option Center of Glass U-Factor Overall U-Factor
20 0.10 0.20
12 0.26 0.33
18 0.14 0.24
0.2413
14
15
16
17
0.28
0.27
0.25
19 0.12 0.22
TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed - Glazed Wall System
0.16
Note: 1 inch Overall - Dual Glazed Glass (0.48-0.20 COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror (0.18-0.10 COG)
with Aluminum Spacer
0.32
0.30
E6659.01-116-45
Page 5 of 10
Tubelite, Inc.
Size Specific SHGC Matrix* Size Specific VT Matrix*
Center of Glass SHGC Overall SHGC Center of Glass VT Overall VT
0.75 0.67 0.75 0.66
0.70 0.63 0.70 0.62
0.65 0.58 0.65 0.58
0.60 0.54 0.60 0.53
0.55 0.50 0.55 0.49
0.50 0.45 0.50 0.44
0.45 0.41 0.45 0.40
0.40 0.36 0.40 0.35
0.35 0.32 0.35 0.31
0.30 0.27 0.30 0.27
0.25 0.23 0.25 0.22
0.20 0.19 0.20 0.18
0.15 0.14 0.15 0.13
0.10 0.10 0.10 0.09
0.05 0.05 0.05 0.04
*Size Specific U-Factor, SHGC, and VT Matrices are based on the standard Glazed
Wall System specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4").
This represents 90.7% Vision Area / Total Area.
TU400 Ultra Thermal Curtain Wall (Polyamide Pressure Plate) - Dual Glazed - Glazed Wall System
E6659.01-116-45
Page 6 of 10
0.3556
0.3382
0.3650
0.3998
0.3475
0.3824
0.4687
0.4345
0.4516
0.3999
0.4168
0.3832
0.5173
0.5006
0.5336
0.5453
0.4840
0.3687
0.5698
0.5578
0.3973
0.3802
0.6194
0.6073
0.3970
0.3557
0.3555
0.3829
0.3831
0.3972
0.3550
0.3695
0.3520
0.3661
0.4386
0.4398
0.4259
0.4081
0.4106
0.4116
0.8991
1.1081
0.9818
0.8985
0.8947
0.4684
0.4504
0.4528
0.4541
0.4362
0.9981
0.9141
1.1224
1.0086
0.9256
1.1323
1.0058
1.1248
1.0032
0.9237
0.3832
0.9956
0.9042
0.3694
0.3696
1.3252
1.3141
2.6373
1.3252
1.3141
1.3242
1.3131
1.3242 0.3973
0.3830
1.1202
0.9929
0.9061
0.9023
0.3939
2.6373
1.3252
1.3141
2.6373
1.3252
1.3131
1.3242
1.3131
1.3141
1.1060
0.4684
0.4540
0.4541
0.4397
0.4399
0.4259
0.4260
0.4116
0.4117
52.0
0.8966
1.3252
1.3141
2.6373
1.3252
1.3141
1.3131
1.3242
1.1176
45.8
46.8
47.9
48.9
50.0
1.3141
2.6373
1.3252
2.6373
Sill
78.74"
95%
Vision Area
148.43"
by
0.9197
1.1272
1.0006
NFRC
Ed
ge
U-F
ac
tor
Vision Area Data
43.7
NFRC
100-2010
78.74"
by
0.46701.3141 0.6316 0.4858
Op
tio
n N
o.
R. Jamb
Sill
0.4683
0.4220
0.4248
0.9226
1.1297
0.9276
1.3242
0.9169
CO
G T
em
pe
ratu
re
Head
70%
Vision Area
23.20"
by
23.20"
Total Product U-Factor
Fra
me
U-F
ac
tor
148.43"CO
G U
-Fa
cto
r
0.481
0.32
2
3
4
9
7
0.9031
0.8993
0.9010
0.8972
51.0
0.9012
0.9841
0.42
0.40
0.348
0.38
5
0.36
6
Mullion
Sill
Head
Mullion
R. Jamb
Sill
Head
L. Jamb
R. Jamb
Cro
ss
Se
cti
on
Head
Mullion
Sill
Mullion
Sill
Head
Mullion
2.6373
1.3252
0.9245
0.9207
0.9216
0.9177
0.9189
0.9150
0.9161
0.9122
L. Jamb
1.3131
1.3242
2.6373
L. Jamb
R. Jamb
1.3252
1.3141
2.6373
1.3131
Mullion
Sill
R. Jamb
Mullion
Sill
Head
1.3242
Sill
Fra
me
He
igh
t
Head
L. Jamb
R. Jamb
Mullion
0.5833 0.4507
0.5954
L. Jamb
0.4335
0.4173
0.44
44.8
0.4674
Head
Mullion
0.46
L. Jamb
R. Jamb
L. Jamb
R. Jamb
L. Jamb
R. Jamb
L. Jamb
1.3131
1.3242
1.3131
1.3242
1.3131
Head
E6659.01-116-45
Page 7 of 10
Vision Area Data
Sill 2.6394 0.9829 0.2285
Op
tio
n N
o.
CO
G U
-Fa
cto
r
CO
G T
em
pe
ratu
re
Cro
ss
Se
cti
on
Fra
me
He
igh
t
Fra
me
U-F
ac
tor
Ed
ge
U-F
ac
tor
Total Product U-Factor
70% NFRC 95%
Vision Area
NFRC
100-2010 Vision Area
0.2504
23.20" 78.74" 148.43"
by by by
23.20" 78.74" 148.43"
16 0.18 59.5 Head 1.3141 0.9240 0.4643 0.2712 0.2276
L. Jamb 1.3131 0.8962 0.3420
R. Jamb 1.3242 0.8923 0.3422
L. Jamb 1.3131 0.8940 0.3283
0.3247
0.3285R. Jamb 1.3242 0.8901
L. Jamb 1.3131 0.8917 0.3148
0.3149R. Jamb 1.3242 0.8878
R. Jamb 1.3242 0.8856
L. Jamb 1.3131 0.8895 0.3013
R. Jamb 1.3242 0.8836
Mullion
L. Jamb 1.3131 0.8875
0.2746
0.2881
0.2880
R. Jamb 1.3242 0.8815
L. Jamb 1.3131 0.8855
1.3141 0.9797 0.3415 0.522010 0.30 53.1 Head 0.3665 0.3301
Mullion 2.6373 0.8943 0.3421
Sill 1.3252 1.1041
1.3141 0.9776 0.3279 0.510411 0.28 54.2 Head 0.3498 0.3126
Mullion 2.6373 0.8920 0.3284
Sill 1.3252 1.1023
12 0.26 55.2 Head
0.3110
1.3141 0.9755 0.3144 0.4989
Sill 1.3252 1.1004 0.2975
0.3331 0.2950
Mullion 2.6373 0.8897 0.3148
13 0.24 56.3 Head 1.3141 0.9736 0.3010 0.2775
Mullion 2.6373 0.8876 0.3014
0.3015
0.4874 0.3165
Sill 1.3252 1.0987 0.2841
0.4760 0.299814 0.22 57.3 Head 1.3141 0.9717 0.2877 0.2600
0.2879
0.9699 0.2744 0.2831
Sill 1.3252 1.0971 0.2708
2.6373 0.8855
0.2747
15 0.20 58.4 Head 1.3141 0.2423
Sill 1.3252 1.0955 0.2575
0.4647
Mullion 2.6373 0.8835 0.2747
Mullion 2.6373
Sill 2.6394
0.8248 0.2364
R. Jamb 1.3242 0.8230 0.2365
0.4534 0.2545 0.2097
L. Jamb 1.3131 0.8267 0.2362
Mullion 2.6373
17 0.16 60.6 Head 1.3141 0.9217 0.2371
0.9851 0.2418
0.8274 0.2497
R. Jamb 1.3242 0.8255 0.2498
L. Jamb 1.3131 0.8292 0.2495
18 0.14 61.7 Head 1.3141 0.9214 0.2229 0.4429 0.2380 0.1920
L. Jamb 1.3131 0.8259 0.2219
R. Jamb 1.3242 0.8222 0.2222
0.8240 0.2221Mullion 2.6373
Sill 2.6394 0.9828 0.2144
E6659.01-116-45
Page 8 of 10
Mullion 2.6373 0.8219 0.2086
R. Jamb 1.3242 0.8200 0.2087
0.2095 0.4321 0.2213 0.1740
L. Jamb 1.3131 0.8238 0.2084
19 0.12 62.8 Head 1.3141 0.9195
by by by
23.20" 78.74" 148.43"
NFRC 95%
Vision Area
NFRC
100-2010 Vision Area
23.20" 78.74" 148.43"
Vision Area DataO
pti
on
No
.
CO
G U
-Fa
cto
r
CO
G T
em
pe
ratu
re
Cro
ss
Se
cti
on
Fra
me
He
igh
t
Fra
me
U-F
ac
tor
Ed
ge
U-F
ac
tor
Total Product U-Factor
70%
Sill 2.6394 0.9811 0.2009
20 0.10 63.9 Head 1.3141 0.9177 0.1960 0.4214 0.2046 0.1560
L. Jamb 1.3131 0.8217 0.1949
R. Jamb 1.3242 0.8179 0.1952
Mullion 2.6373 0.8198 0.1950
Sill 2.6394 0.9794 0.1875
E6659.01-116-45
Page 9 of 10
SIMULATED BY: REVIEWED BY:
AMG:AMG
E6659.01-116-45
Attachments (pages): This report is complete only when all attachments listed are included.
Appendix A: Drawings and Bills of Material (10)
Intertek-ATI will service this report for the entire test record retention period. Test records that
are retained such as detailed drawings, datasheets, representative samples of test specimens, or
other pertinent project documentation will be retained by Intertek-ATI for the entire test record
retention period. The test record retention end date for this report is July 22, 2019.
Results obtained are simulated values and were secured by using the designated test methods.
This report does not constitute certification of this product nor an opinion or endorsement by
this laboratory. It is the exclusive property of the client so named herein and relates only to the
product simulated. This report may not be reproduced, except in full, without the written
approval of Intertek-ATI.
Allison M. Goodyear Kevin S. Louder
Simulation Technician Project Engineer
For INTERTEK-ATI:
E6659.01-116-45
Page 10 of 10
Original Report Issued to Tubelite, Inc.
Rev. #
All.01R0 07/22/15
Date Page(s) Revision(s)
Revision Log
All drawings and Bills of Material used in simulating this product are enclosed in this Appendix.
Appendix AE6659.01-116-45
