I s s u e 3 ‑ M a r c h 2 0 1 0

w w w. p a c l p . c o m

News Headlines

CNS Simdis™ 1

MultiTek™ LLS 1

1000th OptiDist™ 2

Radian UltraFast GC™ 3

Insider Highlight 3

PAC Training Schedule 4

500th HVM 472 4

Model 735 Discount 4

PACInsideris a periodic newsletter of

PAC, LP

For more information, oradditional copies of this

newsletter, visitwww.paclp.comor email us at

marketing@paclp.com© 2010 PAC, LP

AC Analytical Controls’CNS Simdis™ Analyzer

...continued on page 2

AC Analytical Controls’ CNS SIMDIS™ Simulated Distillation Analyzers by PAC provide fast, accurate and simultaneous‑ly‑acquired boiling point distribution information of hydrocarbon, nitrogen, and sulfur. They also provide total Sulfur and Nitrogen information as well. Sulfur and Nitrogen are the most abundantheteroatoms of interest in fuels and process streams therefore to optimize the refining operations it is of primary concern to determine precisely where in

the boiling range span of the process‑ing streams these undesired species are present.

The CNS Simdis™ instruments reveal more details as ever before; not only the total Nitrogen and Sulfur concentrations are determined, but also the valuable

...continued on page 2

Antek’s MultiTek™Demonstrates Unmatched Repeatability

The repeatability of the new MultiTek LLS system has been thoroughly tested in a refinery lab in the UK by analyzing a diesel sample (with 6 ppm sulphur) in 60 consecutive injections. An

average sulphur value of 5.94 ppm with a standard deviation of 0.08 is measured. The new MultiTek provides consistent and reliable results for diesel samples contain‑ing ultra low levels of sulphur concentra‑tions. Official standard methods, e.g., ASTM D5453 and EN ISO 20846, are showing a repeatability of 0.8 ppm for diesel samples containing 6 ppm sulphur.Laboratory testing in the UK shows that the new MultiTek is performing, in terms of pre‑cision; 10 times better than is acceptable in reference methods used worldwide. The Antek MultiTek™ detects sulfur, nitrogen, and halides through a uniquely efficient process that includes combustion Ion Chromatography (IC), Ultraviolet Fluo‑rescence (UVF), and Chemiluminescence technologies. MultiTek™ is superior to wet chemistry and XRF; works with solid, liquid, gas, and LPG samples; and provides lower detection levels than competitive systems.

w w w . p a c l p . c o m

information how these components are distributed in the samples are reported, using the high resolution power from Gas Chromatography. These fully automated analyzers offer Excellent Sensitivity and Selectivity using improved NCD and SCD detectors. They are robust and stable, have a broad concentration range, and deliver fast analysis results. The CNS Simdis™ Simulated Distillation Analyzer is a complete, turnkey system that’s completely assembled with all necessary connections and columns. The AC Simdis software includes automated checks for equimolarity, sensitivity, and stability for easy performance monitoring of the system.

The CNS Simdis™ analyzers are the only instruments on the market that combine boiling point distribution testing for hydrocarbon, nitrogen, and sulfur all in one. The two CNS Simdis™ systems currently released are based on the well‑known Simdis methods ISO 3924, IP406 and ASTM D2887 for samples with final boiling point up to 538°C (1000°F. For samples ranging from 100°C (212°F) to 735°C (1355°F), the HighTemp CNS Simdis application based on EN15199‑1, DIN51.435, IP480 and ASTM D6352/D7500 is available.

Each SIMDIS analyzer is ready to go, cali‑brated, tested to certified calibration blends, fine‑tuned and delivered to the customer’s facility in ‘plug and play’ condition. A quali‑fied and dedicated Service Engineer will visit at the customer’s convenience after delivery to perform installation and training, so that the customer can begin getting the most benefit out of their SIMDIS right away. Plus, PAC’s solid guarantee covers all parts and analytical performance during the first year.

PAC announces the shipment of their 1,000th OptiDist™, a truly revolutionary automated distillation analyzer for the refining and petrochemical industries. OptiDist™ offers the highest level of precision and ease of use ever seen in an instrument of this type. It’s a state‑of‑the‑art optimalsolution for performingatmospheric distillation, fea‑turing easy to use, one button operation, and unparalleled versatility. Its minimal foot‑print saves valuable lab space, installation is easy, and the OptiDist™ offers a very low cost of ownership.

Although the OptiDist was introduced to the market as recently as 2007, its popularity among users, due to its features, perfor‑mance, and value, has made it a PAC ‘best‑seller’, according to Eef Klok, Vice President of Laboratory. “The OptiDist™ provides a unique, state‑of‑the‑art fully automated D86 Distillation Analyzer for our customers” Klok adds. “OptiDist is a patented optimizer and volume measuring system for fully automated distillation control that guarantees highest precision results, and is ideal for new fuels including ethanol blends and biodiesel blends.”

PAC Ships 1000th OptiDist™Automated Distillation Analyzer

CNS Simdis™ Analyzer continued from page 1

MultiTek™ LLS continued from page 1

MultiTek™ is the only instrument on the market that com‑bines testing for sulfur, nitrogen, and halides all in one.

“The best way to predict the future is to invent it.” - Alan Kay

w w w . p a c l p . c o m

Vincent Otten is PAC’s Product Manager for Chromatography applications; he’s based in Rotterdam, The Netherlands. Vincent began working for AC Analyti‑cal Controls, now part of the PAC family, back in 1998.

“Being a PAC Product Manager means I wear a lot of hats” Otten says. “I have worldwide responsibility for the AC product line and all chromatography products. But more importantly, my job is to define what our customers want, and work with engineering to develop solutions for them. It’s my responsibility to maintain good communications with our customers and be aware of their ever‑changing and developing needs. That helps keep PAC technology on the cutting edge of chromatography solutions for the industries we serve.”

Vincent adds that his responsibilities don’t end with the development of a new analyzer; he’s also responsible for training PAC people before the new product is even released to the market. “Once a new product is developed, we train everyone in the use and application of that new product, including service, sales support, and everyone involved, before it is introduced to the marketplace. We also train the trainers, the people who will work closely with the customers.” Vincent’s involvement also includes pricing and marketing. It’s the multi‑faceted nature of his job that he enjoys most, the constant changing challenges and opportunities.

AC Analytical Controls by PAC has pioneered several dedicated instruments including the Reformulyzer™ which incorporates multiple international standard (ASTM, EN, ISO) test methods, the AC8612 and the AC8634 with the core adapted in the widely‑known ASTM D2887 method, the High Temp Simdis, and the DHA–Simdis Crude Oil merge principles.

Insider Highlight:Meet Vincent Otten,PAC’s Product Managerfor ChromatographyThe new Radian

UltraFast CG™ from AC Analytical Controls by PAC is an incredibly fast solution to obtaining precise GasChromatography (GC) type analysis, Up to 20 X times faster than conventional gas chromatography. It can provide extremely fast results because the Radian utilizesMicrowave energy instead of convection oven resistive heating, the heat transfer method typically used in most GC applications.

Conventional ovens take time to heat up as well as to cool down. Radian UltraFast CG™ takes arevolutionary new approach; it uses rapid‑heating microwave radiation instead for fast ramp‑to‑temperature and faster cool‑down. This results in up to 20X time savings, faster retention times, and reproducible operating parameters.

The Radian features a solid‑state microwave power system, the choice between several different cooling systems to reduce overall injection‑to‑injection (cycle) time, and the ability to lower the starting column temperature to sub‑ambient values. ElectronicPneumatic Control (EPC) is available for all inlets and detectors. Specific inlet or detector modules are optimized for control range and resolution.

• Heating rates from 1° up to 350°C/ min• Cools down in seconds• Operates with standard detectors• Flexible to handle different types of applications• Stable fast retention times• Compliant with D7096, D2887 and ASTM D7213 simulated distillation methods

AC Analytical Controls’ Radian UltraFast GC™ has been extensively tested under ultrafast conditions on simulated distillation methods ASTM D7096, D3710, D2887 and D7213. New applications are being worked on every day to leverage the fast advantage of Microwave Technology. The Radian UltraFast GC™ can operate in multiple markets performing a wide variety of applications.

Radian UltraFast GC™ Coming May 2010

Discount in Effect Through end of September, 2010

Antek 9000 users can ensure accurate and repeatable results by elimnating manual in‑jections with Antek’s Model 735 Controlled Rate Sample Drive ‑ available now for a 30% discount until September 30, 2010. Discount applies to the following units: • PN 99230-115V • PN 99230-230V • PN 99230V-115V • PN 99230V-230V

*Contact PAC today for this limited‑time offer.

*Actual colors may vary.

PAC is a leading global provider of advanced analytical instruments for laboratories and online process applications. With a product portfolio of over 200 instruments, PAC serves industries such as refinery, petrochemical, biofuels, environmental, food & beverage and pharmaceutical. To provide its customers with cutting edge

technology, PAC has large R&D resources to support its core technologies; chromatography, elemental analysis, physical properties and software applications.

Part of PAC’s product portfolio is AC Analytical Controls, Antek, Alcor, PetroSpec, PSPI, ISL and Walter Herzog.

PAC 2010 Training Schedule thru May 2010

April 5 ‑ 6, 2010 Course: Herzog’s OptiDist™ Location: Houston

April 12 ‑ 14, 2010 Course: AC Analytical Controls’ Simdis Location: Rotterdam

April 19 ‑ 22, 2010 Course: AC’s Reformulyzer™ Location: Rotterdam

April 20 ‑ 23, 2010 Course: AC Analytical Controls’ Reformulyzer™ Location: Singapore

May 4 ‑ 5, 2010 Course: Alcor’s JFTOT® II and III Location: Houston

May 11 ‑ 13, 2010 Course: AC Analytical Controls’ Simdis Location: Singapore

May 6 ‑ 7, 2010 Course: Antek’s 6200 Analyzer Location: Houston

May 5 ‑ 7, 2010 Course: Antek’s 9000 Analyzer Location: Houston

Discount Continues for Antek’s735 Controlled Rate Sample Drive

PAC has shipped the 500th HVM 472 Multi Range Viscometer for the Refining and Petrochemical Industries. The HVM 472 HVM 472 Viscometermeasures transparent and opaque liquids in as little

500th HVM 472 Multi Range Viscometer Shipped

as five minutes employing a unique dual‑bath design that enables two simultaneous tests at two differenttemperatures. Plus, a revolutionary autosampler offers truly continuous operation: spent sample cups automati‑cally unload, allowing the user to add new samples at any time, even during mid‑test. The HVM 472 meets or exceeds precision requirements of ASTM D 445. Results can be exported to a printer or LIMS.

“The HVM 472 delivers fast, very precise results; it’s an efficient system that’s easy to use, and the combination of speed, results reli‑ability, and efficiency have made itpopular among ourcustomers” Eef Klok, Vice President of Laboratory stated in making the announcement. “Its ‘Fast Run’ Capillary feature provides a 20‑fold measuring range, a flow time of 20 to 90 seconds, a cycle time down to 4/5 minutes total, and an average of 24 results per hour with 2 capillaries.” Simple 3‑step operation and ability to

perform two tests at two temperatures simultaneously have made the HVM 472 a favorite among users needing unmatched flexibility, Klok adds.

Contact your local PAC representative for details on how to register.

May 3 ‑ 5, 2010 Course: PAC Cold Properties Location: Germany

April 19 ‑ 21, 2010 Course: Alcor’s JFTOT® Location: Germany

April 14 ‑ 15, 2010 Course: PAC Flash Point Location: Germany

April 12 ‑ 13, 2010 Course: PAC Distillation Location: Germany

April 26 ‑ 28, 2010 Course: Alcor’s JFTOT® Location: Germany

May 10 ‑ 12, 2010 Course: PAC Cold Properties Location: Germany