FOR MORE INFORMATION OR TO PLACE AN ORDER CALL 800-872-6500PAGE
39
FOLLOWER REST#200.230 $85.00
FIXED STEADY REST#200.240 $75.00
TOOLHOLDER 2 WAY#200.010 $50.00
TOP SLIDE Inch#200.550 $185.00
#A5A140040 Shear Pins $7.75
COMPACT 5 MANUAL#EN2001A $25.00
MORE ACCESSORIESON NEXT PAGE
ACCESSORIES USED BY UNIMAT 3, UNIMAT 4, AND COMPACT 5
Individual Collets $45.00 each ESX-25 Dual Inch/metric
MODEL INCH METRIC225.020 1/16, 5/64 1.5-2.0225.025 3/32
2.1-2.5225.030 7/64 2.6-3.0225.040 1/8, 9/64, 5/32 3.1-4.0225.050
11/64, 3/16 4.1-5.0225.060 13/64,7/32, 15/64 5.1-6.0225.070 1/4,
17/64 6.1-7.0225.080 9/32, 19/64, 5/16 7.1-8.0225.090 21/64, 11/32
8.1-9.0225.100 23/64, 3/8, 25/64 9.1-10.0225.110 13/32, 27/64
10.1-11.0225.120 7/16,29/64, 15/32 11.1-12.0225.130 31/64, 1/2
12.1-13.0225.140 33/64,17/32,35/64 13.1-14.0
COLLET SET SERIES ESX-25 14 collets#225.000 $595.00
ULTRA HIGH PRECISION UNIVERSAL 3-JAW CHUCK#V3U176 $535.00
#T1U.013 SOFT JAWS $75.00Set of 3 for #V3U.176
3-JAW CHUCK UNIVERSAL #200.411 $248.00
#200.412 SOFT JAWS $75.00Set of 3 for 200.411
4-JAW CHUCKINDEPENDENT#200.420 $235.00
ARBOR200.280 $18.00MT1 arbor for mountingof drill chuck on
tailstock
POWER FEED #200.300 $185.00
CHANGE GEAR SET #200.200 $115.00
LEFT HAND THREAD ATTACHMENT#200.060 $55.00
LIVE CENTER#200.260 $55.00
EMCO COMPACT 5 LATHE ACCESSORIES (Lathe no longer available)
COLLET HOLDER FORMILLING ATTACHMENT#200.050 $105.00 Use series
ESX-25
CLAMPING VISE#200.310 $185.00
DIVIDING ATTACHMENT #200.320 $165.00
CUTTER ARBOR#151.070 $45.00for gear milling cutters and circular
saw blades.
MILLING TABLE#150.350 $135.00
FINE FEED ATTACHMENT#151.110 $65.00
\
DRILL CHUCK #152.500 $58.00
#5-600-015 Center Drill $2.00
CIRCULAR SAW BLADE#123.100 $29.00for metal 2.4" diameter
TOOLSET (6pc)#111.500 $75.00Six basic tools: RH & LH
turning, RH facing,boring, finishing, and cut-off.
THREADING TOOLS#111.600 $35.00Internal and external 60
degree
EXTRA CLAMP SET (2)#151.080 $58.00for mill table or face
plate
FLY CUTTER #150.100 $46.00
