FOR MORE INFORMATION OR TO PLACE AN ORDER CALL 800-872-6500PAGE 39

FOLLOWER REST#200.230 $85.00

FIXED STEADY REST#200.240 $75.00

TOOLHOLDER 2 WAY#200.010 $50.00

TOP SLIDE Inch#200.550 $185.00

#A5A140040 Shear Pins $7.75

COMPACT 5 MANUAL#EN2001A $25.00

MORE ACCESSORIESON NEXT PAGE

ACCESSORIES USED BY UNIMAT 3, UNIMAT 4, AND COMPACT 5

Individual Collets $45.00 each ESX-25 Dual Inch/metric

MODEL INCH METRIC225.020 1/16, 5/64 1.5-2.0225.025 3/32 2.1-2.5225.030 7/64 2.6-3.0225.040 1/8, 9/64, 5/32 3.1-4.0225.050 11/64, 3/16 4.1-5.0225.060 13/64,7/32, 15/64 5.1-6.0225.070 1/4, 17/64 6.1-7.0225.080 9/32, 19/64, 5/16 7.1-8.0225.090 21/64, 11/32 8.1-9.0225.100 23/64, 3/8, 25/64 9.1-10.0225.110 13/32, 27/64 10.1-11.0225.120 7/16,29/64, 15/32 11.1-12.0225.130 31/64, 1/2 12.1-13.0225.140 33/64,17/32,35/64 13.1-14.0

COLLET SET SERIES ESX-25 14 collets#225.000 $595.00

ULTRA HIGH PRECISION UNIVERSAL 3-JAW CHUCK#V3U176 $535.00

#T1U.013 SOFT JAWS $75.00Set of 3 for #V3U.176

3-JAW CHUCK UNIVERSAL #200.411 $248.00

#200.412 SOFT JAWS $75.00Set of 3 for 200.411

4-JAW CHUCKINDEPENDENT#200.420 $235.00

ARBOR200.280 $18.00MT1 arbor for mountingof drill chuck on tailstock

POWER FEED #200.300 $185.00

CHANGE GEAR SET #200.200 $115.00

LEFT HAND THREAD ATTACHMENT#200.060 $55.00

LIVE CENTER#200.260 $55.00

EMCO COMPACT 5 LATHE ACCESSORIES (Lathe no longer available)

COLLET HOLDER FORMILLING ATTACHMENT#200.050 $105.00 Use series ESX-25

CLAMPING VISE#200.310 $185.00

DIVIDING ATTACHMENT #200.320 $165.00

CUTTER ARBOR#151.070 $45.00for gear milling cutters and circular saw blades.

MILLING TABLE#150.350 $135.00

FINE FEED ATTACHMENT#151.110 $65.00

\

DRILL CHUCK #152.500 $58.00

#5-600-015 Center Drill $2.00

CIRCULAR SAW BLADE#123.100 $29.00for metal 2.4" diameter

TOOLSET (6pc)#111.500 $75.00Six basic tools: RH & LH turning, RH facing,boring, finishing, and cut-off.

THREADING TOOLS#111.600 $35.00Internal and external 60 degree

EXTRA CLAMP SET (2)#151.080 $58.00for mill table or face plate

FLY CUTTER #150.100 $46.00