Contractor SelectionPresentation

(314) 647-1923 Fax: (314) 647-1924

www.acmeconstructors.com

Carpentry

&

Millwright

The Three “C’s”

• CompetentWith almost 60 years of experience as a company and well over 100 years of project management experience between four PM’s, there are few situations we have not addressed. From assisting with design ideas to coordinating sophisticated and complex interior finishes installation we have done it!

• CompetitiveWe understand that for you to be successful, we need to know our end of the business. With our years of experience and dedicated field crews, we are confident that we understand the market and the factors which drive it.

• ComplimentaryWe are here as an addition to your own field staff. Self-performed Labor is our

business. The key to providing labor is having the right men on the right job.

About ACME• Our History

– ACME Erectors, Inc. is a privately owned company founded in 1947. Purchased by Mr. Tom Heeger in 1995

– In 2006 a decision was made to establish two different companies, focusing on specific areas of work.

• Erectors Structural steel erection and miscellaneous iron• Constructors Carpentry and Millwright

• Our Mission– “Our mission and reputation are one in the same – to deliver a quality

project at a fair cost.”

• Our Geographic Reach– ACME Constructors, Inc. works within a 150-mile radius of St. Louis.

• Tom Heeger, President Acme Constructors– 40+ years construction experience

• Karl Pille, Director of Safety Operations– 20 years construction experience

• Randy Osthoff, Vice President Acme Constructors– 26 years construction experience

• Dave Boeger, Senior Project Estimator– 25 years construction experience

• Steve Faust Project Manager / Business Development– 30 years construction experience

Our Management Team

• Established in 1947

• Bonding Line in excess of $10 Million

• Contracts Averaging $18 Million + per annum the past three years

Growth & Stability

$-

$5,000,000.00

$10,000,000.00

$15,000,000.00

$20,000,000.00

$25,000,000.00

1947 1995 2000 2005 2008

• Carpenters

• Ironworkers

• Millwrights

• Cement Finishers

Union Affiliations

•Laborers•Boilermakers•Operating Engineers

Acme is signatory to the National Maintenance Agreement with all of the above trades

• Associated General Contractors

• American Subcontractors Association

• Council of Owners & Construction Associates

• St. Louis Council of Construction Consumers

• Bi-State Fabricators Association

• Erectors and Riggers Association

• National Erectors Association

Industry Organizations

• OSHA 30 Hour Training– Field superintendents

• OSHA 10 Hour Training / First Aid & CPR– All ACME employees including shop and office personnel

• 100% drug free work force

• Director of Safety Operations• ACME Action Safety Team• Safety Incentive Program

– Quarterly Safety Awards Dinner

Safety is our #1 Priority

Awards and Recognition's

ACME Constructors & Erectors is proud to be recognized by its peers and clients for delivering innovative solutions and high quality workmanship at fair prices.

•2002 AGC Keystone Award - Project of the Year • BJC MRI Facility

•Construction Industry Cost Effectiveness Award•2005 Construction Consumers Council Best Practice Award•2005 AGC of St. Louis National Safety Nominee•2006 AGC of St. Louis National Safety Nominee•2008 AGC Keystone Award- Project of the Year

• Washington University Skylight•2008 AGC Keystone Award – 2nd Place

• Lange Stegmann Equipment Installation

• Carpentry / Millwright– Rough Framing & Interior Finishes

– Sophisticated Mill Work

– Heavy Timbers

– Clean Rooms

– Equipment Installation

– Commercial Window Replacement (Yes, we do windows!)

ACME Constructors

Carpentry Framing and Finish

• Friendship Village West

– St. Louis, Missouri

•As a subcontractor our responsibilities included; wall layout, framing of all exterior and interior walls, interior trim, casework, and exterior soffits.

Project Profile

Loft Projects

• Majestic Stove

• Westgate Lofts

• Southside Tower

• Point 400 (Pet Building)

Project Profile

Interior Trim & Casework

Southside Towers & Pointe 400

• Acme was selected as a sub-contractor to complete the finish trim and casework installation including:

– Doors, frames & hardware

– Wood base, crown mold, casements

– Cabinets, vanities, counter tops.

Project Profile

Carpentry Interior Finsh

• Clayton on the Park

– Luxury Condominiums

Acme was responsible for the interior finish packages including: doors, frames, hardware, trim, casework, counter tops and custom stairs

Project Profile

Carpentry ProjectsABF International

Rough framing of roof and overhang systems.

Laboratory casework.

Project Profile

Historic Restoration

Ivory Theater

• Acme was selected as a sub-contractor to assemble and install the pre-fabricated truss and joist system for the stadium seating.

Project Profile

Historic RestorationHeavy Timber Repair

• Cupples Westin Hotel

• 555 Washington

• Merchandise Mart

Project Profile

Acme was selected as a sub-contractor to repair and replace heavy timber members. Our scope included shoring, removal of damaged or decayed sections and installation of new structural components.

Commercial / Specialty Window Replacement Projects

• Acme has been the contractor of choice to the major window replacement manufactures through-out the St. Louis area.

• Acme’s ability to work with architects and historical preservation groups has allowed us to complete the installation of over 2,000 window units while meeting these very strict guidelines.

– Welsch Baby Carriage

– 1110 Washington

– Bankers Loft

– Sporting News

– UM Columbia dorms

Project Profile

The Meadows

Commercial Office Construction

• Acme was selected as a sub-contractor to complete the roof framing and general trades carpentry scope of work including:

– Setting door frames

– Misc. wood blocking

– Interior finish for leasing office

Project Profile

Cleanrooms & Quality Control Rooms

• Pharmaceutical Client

– St. Louis, Missouri

– Cleanroom Manufacturing Environment

Acme scope of work included:

• Installation of modular wall systems

– Doors, windows, trims.

• Cleanroom ceiling grid and FRP tiles.

• Furring of existing walls with FRP.

Project Profile

Rack and Storage System Installation

• CS Integrated LLC

– Cold Rack Storage

– St. Louis, Missouri

• More than one acre of storage area under roof

• 3500 lineal feet of twenty-five foot high, bolted, tubular steel framed storage racks

• Installed the condenser support steel within the facility

• Pharmaceutical Client

– EC IV Packaging Facility

– Earth City, Missouri

• Approximately 188 tons of multi-level steel racks

Project Profile

Manufacturing Equipment Installation

• Lange Stegmann Agrotain

– Process Equipment Installation

Acme was responsible for the installation of:

• process equipment to manufacture 12 tons of urea per hour

• 420’ of conveyor from the Mississippi river through the production facility.

• Truck and Rail loading and unloading system

• (10) Bucket elevators

Project Profile

Manufacturing Equipment Installation

Missouri American Water

– Process Equipment Installation

Acme relationship with Missouri American has extended over several projects and (4) different facilities.

Our scope of work has included:

• Removal of clarifiers and support equipment.

• Installation of air driven floculators.

• Center pivot pedestals, cages, and drives for a 200’ clarifier sweep including the main access bridge

Project Profile

Specialty Projects

• Six Flags over Texas

– Remove and Re-erect “Sky Screamer” Shuttle Coaster

• Stood over 120 feet in height

• Filled more than thirteen semi-truck trailers

• Six Flags Saint Louis

– Mr. Freeze Shuttle Loop Coaster

• This high-tech, super fast coaster uses a 5,000 horsepower motor to launch a seven-ton train

• Six Flags Saint Louis

– Xcaliber

• Manufactured in Germany

• Placement of the cranes erecting the ride was very difficult due to the limited space.

Project Profile

Contractor SelectionPresentation

(314) 647-1923 Fax: (314) 647-1924

www.acmeerectors.com

Steel Erection

& Precast

• Aron Clay, President Acme Erectors– 14 years construction experience

– BS Construction Engineering and Mgmt, Purdue University ‘93

– MBA, St. Louis University ’03

• Glen Pohl, Senior Estimator– 16 years construction experience

– BS Construction Science Mgmt, Kansas State University ’92

• Bryant Erbes, General Superintendent/ Project Manager– 12 years Ironworking experience

– 6 years U.S. Navy Nuclear Submarine

– Supervisory Training Program Certificate

• Mark Donaldson Estimator– 19 years construction experience

– BS Construction Mgmt, Southern Illinois University Edwardsville

Acme Erectors Management Team

• Washington University

– A. B. School of Law Canopy

• Pre-planned/ Pre-assembled

• Hoisted in two halves

• 550ton Hydraulic Mega-Wing Lift

– University Center

• Six stairs systems

• Window framing

• Curtain wall support framing

• Bronze Railing

Miscellaneous Steel Installation

• AISC Certified Advanced Steel Erector

– Bank Of Washington

• New Five Story Steel Frame Bank

• Erected over existing two story fully operational bank

• Five Trusses weighing up to 40 tons

• 4 months to plan - 1 day to execute

• Balance of erection went as planned without interruption to City function

• Completed erection in 7 weeks

Structural Steel Erection

• AISC Certified Advanced Steel Erector

– Boone County Court House

• Existing Three Story Steel Frame

• Add Fourth and New Roof

• Courts remained operational

– BJC St. Peters

• Three Story Steel Frame Addition

• Erection is currently on-going

Structural Steel Erection

• PCI Qualified Precast Erector

• University of Missouri St. Louis – Parking Garage

• 192 panels, 6 stories with varying terrain

• Structural Double T and Beam– Ellisville Lifetime Fitness

• 287 pcs complete in less than 25 days

– Vernon Hills Lifetime Fitness• 281 pcs complete in less than

25 days

Precast Erection

• Handling Systems, Inc.

– Preferred installer for Handling Systems since 1998

• Shanahan Crane

– Preferred Union Labor installer for Shanahan for the past three years

Overhead Crane Installation

• Artwork Installation

• Over 30 pieces of Art installed to date

– Pulitzer Foundation

– The Gateway Foundation

– St. Louis Art Museum

– Washington University

• Planning/ Shipping/ Unloading/ Installing

– Anything you need help with

Specialty Rigging

Divisions of work that we specialize in:

• Division 5 Structural Steel, Misc. Iron, Overhead cranes

• Division 6 Carpentry Rough and Finish

• Division 8 Doors and Windows

• Division 10 Specialties Modular Systems, Cleanrooms

• Division 11 Equipment Installation, millwrights

• Division 14 Conveyors

Complimenting Your workforce!

Thank You for your time and consideration!

ACME ConstructorsTom Heeger

Randy OsthoffDave BoegerSteve Faust

ACME Erectors Aron ClayGlen Pohl