Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
9533, 9534, 9535, 9537Shower Curtain
© 2017 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 4/6/2017This information is subject to change without notice.Bradley_ShowerCurtain_9533_34_35_37
Model 9533 Antimicrobial Vinyl Shower CurtainGuide Specification
Shower curtain 6 gauge vinyl material with hemmed top edges and aluminum grommets on 6” centers. White only.Vinyl Shower Curtain Model 9533 is available in widths of 36", 42", 48", 60", or 72" and heights of either 72" or 78". See charts below for dimensional information.
Model 9534 Duck Shower CurtainGuide Specification
Shower curtain is 8-oz. 100% cotton duck material with hemmed top edges and chrome-plated nickel grommets on 6" centers. White only.Duck Shower Curtain shall be Bradley Model 9534 is available in widths of 36", 42", 48", 60", or 72" and heights of either 72" or 78". See charts below for dimensional information.
Model 9533 and Model 9534 Shower Curtains have a tolerance of +/- 2" length and +/- 2" width, top edge hemmed.
Model 9533 – Antimicrobial Vinyl Shower Curtain (White) Bradex®
Model 9534 – Duck Shower Curtain (White)
Model 9535 – Antimicrobial Shower Curtain (Green)
Model 9537 – Antimicrobial Shower Curtain (White) Bradex®
9535 and 9537 Width Tolerances
Width Tolerance
36" (914mm) +/- 2"
42" (1067 mm) +/-2"
48" (1219 mm) +/-2"
60" (1524 mm) +/-2"
72" (1829 mm) +/-2"
Length tolerance is +/-2"
Model 9535 & 9537 Antimicrobial Shower CurtainGuide Specification
Shower curtain is 9-oz. nylon-reinforced antimicrobial PVC vinyl fabric (flameproof, stain resistant, self-deodorizing) and furnished with aluminum grommets on 6" centers. Shower curtain is .014" thick with top edge hemmed. Ideal for hospital applications. Model 9535 is Green. Model 9537 is White.Antimicrobial Shower Curtain Model 9535 and 9537 is available in widths of 36", 42", 48", 60", or 72" and heights of either 72" or 78". See charts below for dimensional information.
9533 Models Bradex®
Width Height Overall Dimensions
(Inches)
Overall Dimensions (Millimeters)
# of 9536 Shower Hooks Required
(Order Separately)
36" (914 mm) 72" (1829 mm) 36 x 72 914 x 1829 6
42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 7
48" (1219 mm) 72" (1829 mm) 48 x 72 1219 x 1829 8
60" (1524 mm) 72" (1829 mm) 60 x 72 1524 x 1829 10
72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 12
9534 ModelsWidth Height Overall
Dimensions (Inches)
Overall Dimensions (Millimeters)
# of 9536 Shower Hooks Required
(Order Separately)
36" (914 mm) 72" (1829 mm) 36 x 72 914 x 1829 6
42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 7
48" (1219 mm) 72" (1829 mm) 48 x 72 1219 x 1829 8
60" (1524 mm) 72" (1829 mm) 60 x 72 1524 x 1829 10
72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 12
9535 ModelsWidth Height Overall
Dimensions (Inches)
Overall Dimensions (Millimeters)
# of 9536 Shower Hooks Required
(Order Separately)
36" (914 mm) 72" (1829 mm) 36 x 72 914 x 1829 6
42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 7
48" (1219 mm) 72" (1829 mm) 48 x 72 1219 x 1829 8
60" (1524 mm) 72" (1829 mm) 60 x 72 1524 x 1829 10
72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 12
9537 Models Bradex®
Width Height Overall Dimensions
(Inches)
Overall Dimensions (Millimeters)
# of 9536 Shower Hooks Required
(Order Separately)
36" (914 mm) 72" (1829 mm) 36 x 72 914 x 1829 6
42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 7
48" (1219 mm) 72" (1829 mm) 48 x 72 1219 x 1829 8
60" (1524 mm) 72" (1829 mm) 60 x 72 1524 x 1829 10
72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 12
9536, 9540Shower Curtain Hook
© 2015 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 4/1/2010This information is subject to change without notice.Bradley_ShowerCurtainHooks_9536_40
Model 9536 – Shower Curtain Hook Bradex®
Model 9540 – Shower Curtain Hook with Rollers Bradex®
Product MaterialsModel 9536 Shower Curtain Hook: stainless steel spring wire with snap fastener. Can be used with 1" and 1¼" diameter curtain rods.
Model 9540 Shower Curtain Hook with Rollers: stainless steel wire with snap fastener. Rollers are brass with nickel plating. Five rollers per hook. Can be used with 1" and 1¼" diameter curtain rods.
111⁄16"(43mm)
Model 9536
111⁄16"(43mm)
31⁄8"(79mm)
3"(76mm)
Model 9540
9530Shower Curtain Rod
© 2015 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 3/14/2012This information is subject to change without notice.Bradley_ShowerCurtainRod_9530
Swiveling Mounting System
Accommodates 60" or 72" Shower Stall
Increases Space in Shower Stall
Model 9530-600000 (60") Bradex®
Model 9530-720000 (72")
NOTE: Curtain rods only available in 60" or 72" lengths.
Product MaterialsSWIVEL BRACKETS: chrome-plated zinc die cast construction with exposed surfaces in archi tec tural satin finish. Maximum 55 degree swivel rotation.TUBING: 1" diameter stainless steel, seamless con struc tion with exposed surfaces in architectural satin finish.
InstallationVerify all rough-in dimensions prior to installation. Screws and anchors provided with swivel brackets. For additional installation instructions, visit bradleycorp.com.
When retrofitting or replacing a straight shower rod with Model 9530 curved shower rod, mount the new flange at the same location as the old flange. This will maximize the additional space a curved shower rod is designed to provide.
If properly mounted, the shower rod will withstand a maximum load of 50 lbs. without any sign of a permanent deflection.
Optional FeaturesFeature Suffix
Bright Polished Finish -78
Swivel brackets exposed surfaces are in satin finish.
Guide SpecificationShower curtain rod shall be fabricated of 20 gauge stainless steel in satin finish.
Wall
60" (1524 mm)
Model 9530-600000
Model 9530-720000
72" (1829 mm)
65⁄8"(169 mm)
65⁄8"(169 mm)
Machine Screw
Set Screw
Shower Rod
Swivel Bracket
Mounting Bracket
Mounting Screw
9538, 9539Shower Curtain Rod
© 2017 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 3/3/2017This information is subject to change without notice.Bradley_ShowerCurtainRod_9538_39
Concealed Mounting
Model 9538 – 1" O.D. (36" Long) Bradex®
(42" Long) Bradex®
(48" Long) Bradex®
(60" Long) Bradex®
(72" Long) Bradex®
Model 9539 – 1-1/4" O.D. (36" Long) Bradex®
(42" Long) (48" Long) Bradex®
(60" Long) Bradex®
(72" Long)
For 72" lengths and greater, model 9522 Shower Rod Ceiling Support is required! Must specify distance from the ceiling!
Product MaterialsFLANGES: glass polypropylene, 31⁄8" dia. Shower rod support sleeves formed with flange as one piece.ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn con struction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws.TUBING: 18 gauge stainless steel, seamless con struc tion with exposed surfaces in architectural satin finish.
InstallationVerify all rough-in dimensions prior to installation. To properly engage rod in support sleeves, rod length must be no less than ap prox i mate ly ¼" shorter than wall opening. Secure one flange to wall with mounting screws (included) at holes provided. Align mounting holes vertically. Slip opposite flange and both escutcheons into place. Secure flange to wall and snap escutcheons over mounting flanges.
Optional FeaturesFeature Suffix
Bright polished finish -4
Guide SpecificationConcealed mounted shower rod shall be fab ri cat ed of 18 gauge stainless steel of seamless construction. Mounting flanges shall be of glass polypro py lene with snap-on vandal-resistant protective es cutch eons.
FLANGE (CON CEALED)
(2) - ¼ x 2½"HEX HD. LAG BOLT
ESCUTCHEON(SNAP ON TYPE)
SHOWER ROD
WALL
“L”
© 2014 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com
Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 1 3/17/2014This information is subject to change without notice.Bradley_WasteReceptacle_357
357Waste Receptacle
Model 357 — Surface-Mounted Bradex®
6.5-gallon Capacity
Product Materials RECEPTACLE: 22 gauge stainless steel with exposed surfaces in architectural satin finish. All welded con struc tion with rounded front corners. LINER: (optional) heavy-duty stitched vinyl-coated nylon. HINGED COVER: (optional) 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy-duty stainless steel piano hinge.
Capacity6.5 gal. (0.9 cu. ft.)
Operation Optional vinyl liner is attached to receptacle with hook-and-loop fasteners, easily removed for servicing.
Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-027).
Optional Features
Guide Specification Surface-mounted waste receptacle shall be fabricated of 22 gauge stainless steel with seamless exposed surfaces in satin finish. Reusable heavy-duty vinyl liner (optional). Receptacle holds 6.5 gal. Overall dimensions: 14"W x 18"H x 6"D.
ADA Compliant Consult local and national accessibility codes for proper installation guidelines.
Conformity and compliance to local and national codes is the responsibility of the installer. Dim. "A" Key Surface:
For Dim. "A" Top of Unit Bottom of Unit
Waste receptacle top lip to finished floor
36" (914mm) 36" (914mm) 18" (457mm)
32" (813mm) 32" (813mm) 14" (356mm)
28" (711mm) 28" (711mm) 10" (254mm)
Rough wall opening:
Surface Mount: No rough wall opening, see overall dimensions
6"(152mm)
18"(457mm)
1½"(38mm)
Hinged Cover
1½"(38mm)
Typ.
(4) Mounting
Holes
3"(76mm)
Typ.
Dim. "A" to
finished floor
14"(356mm)
Feature Suffix
Hinged cover -35
Vinyl Liner Part #P11-007
SPECIFICATIONS
Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler Filtered 8 GPH Stainless Model HACG8BLSS-WF
In keeping with our policy of continuing product improvement, Halsey Taylor reserves the right to change product specifications without notice. Please visit Halseytaylor.com for the most current version of Halsey Taylor product specification sheets. This specification describes a Halsey Taylor product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Halsey Taylor REV 07082017 2222 Camden Court © 2017 Page 1 of 2 HACG8BLSS-WF Oak Brook, IL 60523 HACG8BLSS-WF_spec.pdf
PRODUCT SPECIFICATIONS
Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler, Filtered 8 GPH Stainless. Chilling Capacity of 8.0 GPH (gallons per hour) of
50 F drinking water, based on 80 F inlet water and 90 F ambient, per ASHRAE 18 testing. Features shall include Energy Savings, Filtered. Furnished with Double Bubbler™. Mechanical Front And Side Bubbler Pushbar activation. Product shall be Wall Mount (On-Wall), for Indoor applications, serving 2 station(s). Unit shall be certified to UL 399 and CAN/CSA C22.2 No. 120. Unit shall be lead-free design which is certified to NSF/ANSI 61 & 372 (lead free) and meets Federal and State low-lead requirements.
Special Features: Energy Savings, Filtered
Finish: Stainless Steel
Power: 115V/60Hz
Bubbler Style: Double Bubbler™
Activation by: Mechanical Front And Side Bubbler Pushbar
Mounting Type: Wall Mount (On-Wall)
Chilling Option*: 8.0 GPH
Full Load Amps 4.5
Dimensions (L x W x H): 21" x 21" x 38"
Approx. Shipping Weight: 97 lbs.
Installation Location: Indoor
No. of Stations Served: 2
*Based on 80° F inlet water & 90° F ambient air temp for 50° F chilled drinking water.
Mechanically-Activated bubbler continues to supply water in event of service disruptions.
Filter is certified to NSF 42 and 53 for lead, particulate, chlorine, taste and odor reduction. 1,500 gal. capacity.
Energy-Savings Feature - allowing for the refrigeration to be powered off when not in use.
Exclusive Double Bubbler™ which projects two separate streams that converge to form a fuller, more satisfying drink.
COOLING SYSTEM
Compressor: Hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.
Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Continuous copper tubing with is fully insulated with EPS foam that meets UL requirements for self-extinguishing material.
Refrigerant Control: Refrigerant R-134a is controlled by accurately calibrated capillary tube.
Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
AMERICAN PRIDE. A LIFETIME TRADITION. Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.
Included with Product: Water Cooler, Filter
PRODUCT COMPLIANCE
ADA
Buy American Act
CAN/CSA C22.2 No. 120
NSF/ANSI 42, 53, 61, and 372 (lead free)
UL 399
Installation Instructions (PDF) 5 Year Limited Warranty on the refrigeration system of the unit. Electrical components and water system are warranted for 12 months from date of installation. Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty.
Warranty (PDF)
OPTIONAL ACCESSORIES 55897C - WaterSentry® VII Replacement Filter (Coolers + Fountains)
MLP200 - Accessory - In Wall Carrier (Bi-Level)
98324C - Accessory - Cane Apron for HAC, HVR, EMABF & VRC Models (Stainless)
96852CA - Accessory - Glass Filler Kit
PART:________________________________QTY: _____________
PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________
NOTES:_________________________________________________
APPROVAL:_____________________________________________
SPECIFICATIONS
Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler Filtered 8 GPH Stainless Model HACG8BLSS-WF
In keeping with our policy of continuing product improvement, Halsey Taylor reserves the right to change product specifications without notice. Please visit Halseytaylor.com for the most current version of Halsey Taylor product specification sheets. This specification describes a Halsey Taylor product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Halsey Taylor REV 07082017 2222 Camden Court © 2017 Page 2 of 2 HACG8BLSS-WF Oak Brook, IL 60523 HACG8BLSS-WF_spec.pdf
Wafer LED Recessed Downlight
WF66" LED Module
IC/Non-ICNew Construction/Remodel
Specifications
Aperture: 4.9 (12.4)
Ceiling opening: 6 (15.2)
Overlap trim: 6.7 (17)
Height: 1.1 (2.8)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONSINTENDED USE — The 6" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas.
CONSTRUCTION — Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Steel spring clip for easy installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
PATENT PENDING.
INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation. 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable for installation in t-grid and drop ceiling applications.
OPTICS — Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides even illumination throughout the space. Utilized 3000K and 4000K color temperature LEDs.
ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 13W, 79 lumens per watt.
LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified product. Wet location. Air Tight certified in accordance with ASTM E283-2004.
WARRANTY — 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
DOWNLIGHTING WF6
DIM
MABLE
WF6
Series Lamp CCT/CRI/W/Lumens1 Finish
WF6 6" wafer-thin LED downlight LED LED
LL LED Low Lumen LED
30K 3000K/80CRI/13W/1020L40K 4000K/80CRI/13.6W/1200L
27K 2700K/80CRI/12.7W/780L30K 3000K/80CRI/12.6W/865L40K 4000K/80CRI/12.9W/944L
MW Matte whiteMB Matte blackBN Brushed nickelORB Oil-rubbed bronze
ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: WF6 LED 30K MW
Catalog Number
Notes
Type
4.9"(12.4)
5.9"(12.4)
6.7"(17.0)
1.1"(2.8)
Accessories: Order as separate catalog number.
WF6 PAN R12 6" new construction pan, retail pack of 12WFJB R4 Remodel joist bar, retail pack of 4WFEXC6 U 6' FT4 cableWFEXC10 U 10' FT4 cableWFEXC20 U 20' FT4 cable
Matte black Brushed nickel Oil-rubbed bronze
Notes
1 Total system delivered lumens.
WF6_Pan Joist Extension Cable
WF6
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/14/17
WF6 6" LED Wafer Module
PHOTOMETRICS
WF6 LED 30K, 3000 K LEDs, input watts: 13, delivered lumens: 1020, LM/W=78.5, test no. ISF 30024
WF6 LL LED 27K, 2700 K LEDs, input watts: 12.7, delivered lumens: 819, LM/W=64.4, test no. ISF 32780P1
WF6 LL LED 30K, 3000 K LEDs, input watts: 12.6, delivered lumens: 865, LM/W=68.7, test no. ISF 32781
WF6 LED 40K, 4000 K LEDs, input watts: 13.6, delivered lumens: 1200, LM/W=88.2, test no. ISF 30376
DATE: PRINT DATE: TEST NO: MANUFACTURER: LUMINAIRE CATALOG NO.: LUMINAIRE DESCRIPTION: LAMP DESCRIPTION: LUMENS PER LAMP: [_LAMPWATTAGE] [_PRODUCTID] [_LAMPPOSITION] [_TOTALLUMINAIRELUMENS]
2/4/2016 March 31, 2016 ISF 30024Acuity Brands
WF6 LED 30K6" Matte White LED Ultra-Thin Wafer Downlight, 3000K CCT, Lextar 2835 LED
LED1031.814
12.933299db9a9-dd43-4508-84e9-b8c44aec291f
0 , 01031.7
0° 20°
40°
60°
80°
200
Ave Lumens05152535455565758590
38138036733629324018112164172
361031551831851621206820
Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°
90° - 180°0° - 180°
294.0477.1823.91031.8
0.01031.8
28.546.279.8100.00.0
*100.0*Efficiency
Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910
119104918071635752474440
119100847262554843393532
11996786556484237333027
116102897870625651474340
11698837161544843393532
11694786555484237333027
11198857567605450454239
11194806960534742383532
11191766454474137333027
RC
R
50% beam -63.3°
10% beam -108.0°
MountingHeight
Inital FCCenterBeam Diameter FC Diameter FC
8.010.012.014.016.0
12.66.84.22.92.1
6.89.211.714.216.6
6.33.42.11.41.0
15.120.626.131.637.1
1.30.70.40.30.2
Spacing to Mounting Height:1.2
DATE: PRINT DATE: TEST NO:
MANUFACTURER:
LUMINAIRE CATALOG NO.:
LUMINAIRE DESCRIPTION:
LAMP DESCRIPTION:
LUMENS PER LAMP:
[_FAMILY]
[_PRODUCTID]
[_LAMPPOSITION]
[_MOUNTING]
[_TOTALLUMINAIRELUMENS]
[_ABSOLUTE]
[_ABSOLUTELUMENS]
[_INPUT_ELECTRICAL]
[_SCALED_TEST]
[_TEMP0]
12/14/2016 April 21, 2017 ISF 32780P1
Lithonia Lighting
WF6 LLLED 27K
LED Ultra Thin Wafer Low Lumen 2700K
N/A
819.0552
WF6 Downlight
78f790a3-5bfa-40e4-b4a4-43e9280e59c8
0 , 0
RECESSED DOWNLIGHT
819.1
NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED.
944.5
120.4 VOLTS, 12.9 WATTS, 0.108 AMPS
SCALED FROM ABSOLUTE TEST: ISF 33170S AND BASED ON NOMINAL SYSTEM PERFORMANCE.
AMBIENT: 25.0
0° 20°
40°
60°
80°
200
Ave Lumens
0
5
15
25
35
45
55
65
75
85
90
304
303
293
269
234
189
140
94
52
16
1
29
83
124
146
146
126
93
55
17
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 120°
90° - 130°
90° - 150°
90° - 180°
0° - 180°
235.3
381.3
652.9
819.0
0.1
0.1
0.1
0.1
819.1
28.7
46.6
79.7
100.0
0.0
0.0
0.0
0.0
*100.0
*Efficiency
Coefficients of Utilization
pf 20%
pc 80% 70% 50%
pw 50% 30% 10% 50% 30% 10% 50% 30% 10%
0
1
2
3
4
5
6
7
8
9
10
119
104
91
80
71
64
57
52
48
44
40
119
100
84
72
62
55
48
43
39
36
32
119
96
78
65
56
48
42
37
33
30
27
116
102
89
78
70
62
56
51
47
43
40
116
98
83
71
62
54
48
43
39
35
32
116
94
77
65
55
48
42
37
33
30
27
111
97
85
75
67
60
55
50
46
42
39
111
94
80
69
60
53
47
42
38
35
32
111
91
76
64
54
47
41
37
33
30
27
RC
R
50% beam -
63.4°
10% beam -
107.4°
Mounting
Height
Inital FC
Center
Beam Diameter FC Diameter FC
8.0
10.0
12.0
14.0
16.0
10.0
5.4
3.4
2.3
1.7
6.8
9.3
11.7
14.2
16.7
5.0
2.7
1.7
1.1
0.8
15.0
20.4
25.9
31.3
36.8
1.0
0.5
0.3
0.2
0.2
Spacing to Mounting Height:1.2
DATE: PRINT DATE: TEST NO:
MANUFACTURER:
LUMINAIRE CATALOG NO.:
LUMINAIRE DESCRIPTION:
LAMP DESCRIPTION:
LUMENS PER LAMP:
[_PRODUCTID]
[_LAMPPOSITION]
[_MOUNTING]
[_TOTALLUMINAIRELUMENS]
[_ABSOLUTE]
[_ABSOLUTELUMENS]
[_INPUT_ELECTRICAL]
[_TEMP0]
12/14/2016 April 21, 2017 ISF 32781
Lithonia Lighting
WF6 LLLED 30K
LED Ultra Thin Wafer Low Lumen 3000K_LGP Update
N/A
864.696
b71c4ce5-14f6-4a11-b318-465b67fbcff1
0 , 0
RECESSED DOWNLIGHT
864.7
NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED.
865.4
120.4 VOLTS, 12.6 WATTS, 0.106 AMPS
AMBIENT: 25.0
0° 20°
40°
60°
80°
200
Ave Lumens
0
5
15
25
35
45
55
65
75
85
90
322
322
311
285
248
199
148
99
54
17
1
31
88
131
155
154
132
98
58
19
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 120°
90° - 130°
90° - 150°
90° - 180°
0° - 180°
249.7
404.3
690.1
864.6
0.1
0.1
0.1
0.1
864.7
28.9
46.8
79.8
100.0
0.0
0.0
0.0
0.0
*100.0
*Efficiency
Coefficients of Utilization
pf 20%
pc 80% 70% 50%
pw 50% 30% 10% 50% 30% 10% 50% 30% 10%
0
1
2
3
4
5
6
7
8
9
10
119
104
91
80
71
64
57
52
48
44
40
119
100
84
72
62
55
49
43
39
36
33
119
96
78
65
56
48
42
37
33
30
27
116
102
89
78
70
63
56
51
47
43
40
116
98
83
71
62
54
48
43
39
35
32
116
94
77
65
55
48
42
37
33
30
27
111
97
85
75
67
60
55
50
46
42
39
111
94
80
69
60
53
47
42
38
35
32
111
91
76
64
55
47
42
37
33
30
27
RC
R
50% beam -
63.4°
10% beam -
107.3°
Mounting
Height
Inital FC
Center
Beam Diameter FC Diameter FC
8.0
10.0
12.0
14.0
16.0
10.6
5.7
3.6
2.4
1.8
6.8
9.3
11.7
14.2
16.7
5.3
2.9
1.8
1.2
0.9
14.9
20.4
25.8
31.2
36.7
1.1
0.6
0.4
0.2
0.2
Spacing to Mounting Height:1.2
DATE: PRINT DATE: TEST NO: MANUFACTURER: LUMINAIRE CATALOG NO.: LUMINAIRE DESCRIPTION: LAMP DESCRIPTION: LUMENS PER LAMP: [_PRODUCTID] [_LAMPPOSITION] [_MOUNTING] [_TOTALLUMINAIRELUMENS] [_ABSOLUTE] [_ABSOLUTELUMENS] [_INPUT_ELECTRICAL] [_TEMP0]
3/15/2016 March 31, 2016 ISF 30376Lithonia Lighting
WF6 LED 40K6" MATTE WHITE LED ULTRA-THIN WAFER DOWNLIGHT, 4000K CCT, LEXTAR 2835 LED
LED1201.765
e238c158-3c1e-477c-b42d-6632d86c006b0 , 0
RECESSED DOWNLIGHT1201.4
NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED.1203120.1 VOLTS, 13.5 WATTS, 0.114 AMPS
AMBIENT: 25.9
0° 20°
40°
60°
80°
200
400
Ave Lumens05152535455565758590
42342240737433027621414984261
401151732062121911478929
Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°
90° - 180°0° - 180°
327.3533.5936.31201.8
0.01201.8
27.244.477.9100.00.0
*100.0*Efficiency
Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910
119104907970625651474339
11999837161534742383431
11995776454474136322926
116101887769615550464239
11697827060534742383431
11694766354464136322926
11197857466595349444138
11194796859524641373431
11191756253464036322926
RC
R
50% beam -63.7°
10% beam -109.1°
MountingHeight
Inital FCCenterBeam Diameter FC Diameter FC
8.010.012.014.016.0
14.07.54.73.22.3
6.89.311.814.316.8
7.03.82.31.61.2
15.521.126.732.337.9
1.40.80.50.30.2
Spacing to Mounting Height:1.2
Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire
WF6
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/14/17
WF6 6" LED Wafer Module
ENERGY DATA & DIMMING CAPABILITY6" ENERGY DATA
Color Temperature 3000K 4000K
Lumens 1020 1200
CRI 80 80
Lumens/Watt 78.5 88.2
Min. starting temperature -40°C (-40°F) -40°C (-40°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B
FCC Title 47 CFR, Part 15, Class B
Sound rating Class A Standards Class A Standards
Input voltage 120V 120V
Total Harmonic Distortion 17.9% 17.9%
Min. power factor 0.99 0.99
Input frequency 50/60 Hz 50/60 Hz
Rated wattage 13W 13.6W
Input power 13W 13.6W
Input current 0.11A 0.11A
6" LOW LUMEN ENERGY DATA
Color Temperature 2700K 3000K 4000K
Lumens 780 865 944
CRI 80 80 80
Lumens/Watt 61.3 68.7 73.2
Min. starting temperature -40°C (-40°F) -40°C (-40°F) -40°C (-40°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B
FCC Title 47 CFR, Part 15, Class B
FCC Title 47 CFR, Part 15, Class B
Sound rating Class A Standards Class A Standards Class A Standards
Input voltage 120V 120V 120V
Total Harmonic Distortion 12% 15.0% 11.6%
Min. power factor 0.99 0.99 0.99
Input frequency 50/60 Hz 50/60 Hz 50/60 Hz
Rated wattage 12.7W 12.6W 12.9W
Input power 12.7W 12.6W 12.9W
Input current 0.11A 0.11A 0.11A
COMPATIBLE DIMMERS
Insteon Leviton Lutron Sensorswitch Synergy/Leviton
2477D 6633-PA CTCL-153P-WH nSP5 PCD 2W ISD 600 I 120/IPI06
IPL06-LED/INC mode DV-603P-LA nSP5 PCD ELV 120 ISD 400 ELV 120/IPE04
6615-P CT-603PR-WH
DVELV-300P
NTELV-300P
NLV600
300P-SELV
DV-600P
AYCL-153P-WH
CTCL-153P-WH
WF6 LL LED 40K, 4000 K LEDs, input watts: 12.9, delivered lumens: 944, LM/W=73.2, test no. ISF 32780
DATE: PRINT DATE: TEST NO:
MANUFACTURER:
LUMINAIRE CATALOG NO.:
LUMINAIRE DESCRIPTION:
LAMP DESCRIPTION:
LUMENS PER LAMP:
[_PRODUCTID]
[_LAMPPOSITION]
[_MOUNTING]
[_TOTALLUMINAIRELUMENS]
[_ABSOLUTE]
[_ABSOLUTELUMENS]
[_INPUT_ELECTRICAL]
[_TEMP0]
12/14/2016 April 21, 2017 ISF 32780
Lithonia Lighting
WF6 LLLED 40K
LED Ultra Thin Wafer Low Lumen 4000K_LGP Update
N/A
943.7484
e1f536af-b6f8-488b-bbb3-dd3e8b7b0d6f
0 , 0
RECESSED DOWNLIGHT
943.8
NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED.
944.5
120.4 VOLTS, 12.9 WATTS, 0.108 AMPS
AMBIENT: 25.0
0° 20°
40°
60°
80°
200
Ave Lumens
0
5
15
25
35
45
55
65
75
85
90
350
350
337
310
270
218
162
109
60
18
1
33
95
143
168
168
145
108
64
20
Zone Lumens % Lamp
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 120°
90° - 130°
90° - 150°
90° - 180°
0° - 180°
271.1
439.4
752.3
943.7
0.1
0.1
0.1
0.1
943.7
28.7
46.6
79.7
100.0
0.0
0.0
0.0
0.0
*100.0
*Efficiency
Coefficients of Utilization
pf 20%
pc 80% 70% 50%
pw 50% 30% 10% 50% 30% 10% 50% 30% 10%
0
1
2
3
4
5
6
7
8
9
10
119
104
91
80
71
64
57
52
48
44
40
119
100
84
72
62
55
48
43
39
36
32
119
96
78
65
56
48
42
37
33
30
27
116
102
89
78
70
62
56
51
47
43
40
116
98
83
71
62
54
48
43
39
35
32
116
94
77
65
55
48
42
37
33
30
27
111
97
85
75
67
60
55
50
46
42
39
111
94
80
69
60
53
47
42
38
35
32
111
91
76
64
54
47
41
37
33
30
27
RC
R
50% beam -
63.4°
10% beam -
107.4°
Mounting
Height
Inital FC
Center
Beam Diameter FC Diameter FC
8.0
10.0
12.0
14.0
16.0
11.6
6.2
3.9
2.6
1.9
6.8
9.3
11.7
14.2
16.7
5.8
3.1
1.9
1.3
1.0
15.0
20.4
25.9
31.3
36.8
1.2
0.6
0.4
0.3
0.2
Spacing to Mounting Height:1.2
WF6
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/14/17
WF6 6" LED Wafer Module
LIGHTING FACTS
EAC ISSMAC Power System
EMERGENCY EAC ISSM 20WB
Specifications
Length: 16.6
Depth: 2.85
Height: 2.80
Weight: 5 lbs.
EAC ISSM 20WB 120/277
Series System VA rating Voltage
EAC Emergency AC power system ISSM Interruptible 20WB 120/277
Example: EAC ISSM 20WB 120/277
Catalog Number
Notes
TypeFEATURES & SPECIFICATIONSINTENDED USE —Emergency Lighting Micro Inverter works in conjunction with a fluorescent or LED fixture to create an emergency lighting system. The inverter operates a maximum load of 20 to 25W at unity power factor. It allows the connected fixtures to be on, off, switched or dimmed without affecting emergency operation. The Inverter provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications.
CONSTRUCTION — Steel case, with a single pole (Momentary) test switch and pilot light.
ELECTRICAL — Lamp compatibility: LED, and fluorescent. Single Pole (Momentary) test switch and pilot light. 23" of armored cable.
Input: 120V or 277V
Output: 120V/277V Auto select, 60Hz
BATTERY — High-temperature maintenance free nickel-cadmium battery, charger and electronic circuitry constructed in a steel case. 24 hour recharge.
INSTALLATION — The inverter does not affect normal fixture operation and may be used switched or un-switched. Line voltage allows for remote mounting up to 250 feet maximum. Back mount only.
LISTINGS — Underwriters Laboratories in accordance with the standards set forth in UL 924, “Emer-gency Lighting and Power Equipment,” and by the Canadian Standards Association (CSA) in accordance with the standards set forth in C22.2 No. 141, “Unit Equipment for Emergency Lighting.” The EAC ISSM 20WB 120/277 is UL Listed and CSA Certified for field installation. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA- LSC), National Building Code of Canada (NBC), National Fire Code of Canada (NFC) and UL 90-minute requirements.
UL and CSA 20W (0°C to 50°C) 32°F to 122°F
UL only 25W (0°C to 45°C) 32°F to 113°F)
WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.
SPECIFICATIONS
EAC ISSM Interruptible Power System
MOUNTINGAll dimensions are inches (centimeters) unless otherwise indicated.
EAC ISSM 20WB
EMERGENCY: One Lithonia Way, Conyers, GA 30012 Phone: 800-334-8694 Fax: 770-981-8141 www.lithonia.com © 2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/10/16
Notes
1 At 77°F (25°C).
2 All life safety equipment, including emergency lighting for path of egress, must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service or testing could jeopardize the safety of occupants and will void all warranties.
3 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed information.
Electrical Specifications
Rating Input voltage Output watts
20WB 120 20
25WB 277 25
2.80"
2.85"
16.6"
16.05"
LED WL4-LED
Catalog Number
Notes
TypeFEATURES & SPECIFICATIONSINTENDED USE — For wall or ceiling mounting, vertical or horizontal. The WL combines digital LED lighting and controls technologies with high-performance optical design to offer the most advanced wall-mount luminaire for general ambient lighting applications. High-efficacy light engine delivers long life and excellent color, ensuring a superior quality lighting installation that is highly efficient and sustainable.CONSTRUCTION — Housing is roll formed from code-gauge steel. Refractor is retained in die cast ends providing secure installation and easy maintenance. Decorative die-cast end caps provide added durability. Finish: All metal parts are post-painted in white polyester powder coat for smooth, finished edges and uniform light distribution.OPTICS — Impact modified linear faceted refractor. Optically engineered for superior light distribution and maximum efficacy. Crescent-shape linear faceted refractor system obscures and integrates individual LED images and uniformly washes fixture surface with light. ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The LEDs have a CRI of 82.eldoLED driver options deliver choice of dimming range and choice for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI.Driver disconnect provided where required to comply with US and Canadian codes.Optional nLight® embedded controls continuously monitor system performance and allow for constant lumen management function.Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing energy waste created by the traditional practice of over-lighting.SENSOR — Integrated sensor (individual control): Sensor Switch MSD7 (Passive Infrared (PIR)) integrated occupancy sensor photocell allows the luminaire to power off when the space is unoccupied. See page 4 for more details on the integrated sensor. Integrated Sensor (nLight Wired Networking): The sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired using CAT-5 cabling with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. See page 4 for the nLight sensor options. Interated Smart Sensor (nLight AIR Wireless Platform): The rES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is both digital PIR occupancy sensor and automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 4 for more details on the Integrated Smart Sensor.XPoint Wireless Networking: XPoint™ Wireless technology creates a mesh network to ensure communication between fixtures, sensors, and wall stations facility wide. This option provides superior lighting management capabilities including granular control, configuration, and custom grouping. This option enables sensors that detect motion to wirelessly communicate to neighboring fixtures — whether on different floors in a stairwell, to a corridor or hallway — illuminating the desired path. LISTINGS — CSA certified to meet U.S. and Canadian standards. Suitable for damp location (excluding sensor option).Patents pending. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.WARRANTY — 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxNOTE: Actual performance may differ as a result of end-user environment and application.All values are design or typical values, measured under laboratory conditions at 25 °C.Specifications subject to change without notice.
Wall bracket & Surface Mount LED
WL44'
LED
Capable LuminaireThis item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks when ordered with drivers marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
WL4 Wall Bracket & Surface Mount LED
WL4
Series Lumens1 Voltage Driver Color temperature Controls
WL4 4' wall-mount LED 20L 2000 lumens30L 3000 lumens40L 4000 lumens
(blank) MVOLT347 347V
EZ1 eldoLED dims to 1%, 0-10VEZB eldoLED dims to dark, 0-10V
LP830 3000 KLP835 3500 KLP840 4000 KLP850 5000 K
(blank) No nLightN80 nLight® with 80% lumen
managementN80EMG nLight® with 80% lumen
management for use with generator supply EM power2
N100 nLight® without lumen management
N100EMG nLight® without lumen management for use with generator supply EM power2
NLTAIR nLight AIR enabled3
Occupancy control4 Standby mode8 Options Finish10
(blank) No sensor controlnLight Wired NetworkingNES7 nLight® nES 7 PIR integral occupancy sensor5
NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control5
NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell5
Individual ControlMSD7 Sensor Switch® MSD 7 PIR Integral Occupancy Control6
Xpoint WirelessXADS7 XPoint™wireless controller and micro 360° PIR occupancy and
photocell sensor7
XADNS7 XPoint™å wireless controller and micro 360° PIR occupancy and photocell sensor (egress lighting)7
nLight Wireless NetworkingRES7N nLight® AIR PIR integral occupancy sensor with automatic
dimming photocell for Networking CapabilitiesnLight Wireless ZoneRES7Z nLight® AIR PIR integral occupancy sensor with automatic
dimming photocell for zone control
(blank) Fixture turns off when unoccupiedDIM10 Fixture dims to approximately 10%
light output when unoccupiedDIM50 Fixture dims to approximately 50%
light output when unoccupied
EL7L LED Emergency battery pack (nominal 700 lumens); see Life Safety section9
EL14L LED Emergency battery pack (nominal 1400 lumens); see Life Safety section9
SC Surface conduit end cap provisions
(blank) White
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: WL4 30L EZ1 LP840
Notes1 Approximate lumen output.2 nLight EMG option requires a connectio nto existing nLight network. Power is provided
from a separate N80 or N100 enabled fixture3 Must order with RES7N or RES7Z sensor. Only availble with EZ1 driver.4 See sensor options on page 3.5 Requires N80, N100, N80EMG, or N100EMG. Cannot be ordered with EZB and EL7L or
EL14L together.6 Not available with nLight options or EZB.7 Not available with nLight options or Standyby Mode. Gateway not included. Requires
on-site commissioning. Visit www.lightingcontrols.com/XPointWireless for more information.
8 Requires Occupancy Control.9 Not available with 347V. Cannot be ordered with 40L, EZB, and sensor combination.10 For additional paint finishes, refer to Architectural Colors.
A+ Capable options indicated by this color background.
WL4-LED
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/29/17
WL4 Wall Bracket & Surface Mount LED
nLight® Wired Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight.
WallPod stations Model number Occupancy sensors Model numberOn/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJBOn/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJBGraphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color]Photocell controls Model number Cat-5 cable (plenum rated) Model numberFull range dimming nCM ADCX RJB 10' cable CAT5 10FT J1
30' cable CAT5 30FT J1
nLight® AIR Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlightair.
Wall switches Model numberOn/Off single pole rPODB [color]On/Off two pole rPODB 2P [color]On/Off & raise/lower single pole rPODB DX [color]On/Off & raise/lower two pole rPODB 2P DX [color]On/Off & raise/lower single pole rPODBZ DX WH1
Notes1 Can only be ordered with the RES7Z zone control sensor version.
WL4-LED
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/29/17
WL4 Wall Bracket & Surface Mount LED
Integrated Sensor with Individual Control The MSD7 PIR occupancy sensor is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving.
Sequence of Operation
MIN
LIGHT
LEVE
LMAX
7.5 MINTIME DELAY
2.5 MIN ATA 1% LEVEL
LIGHTS OFF LIGHTS ONLIGHTS ON
Room Unoccupied
OccupantsDetected In The Space
Sensor Detects Motion
MOTION NO MOTION MOTION
SEQUENCE OF OPERATION
5.5 184.6 153.7 122.7 91.8 60.9 30 m 0 ft0.9 31.8 62.7 93.7 124.6 155.5 18
9 FT Mounting
• Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)
• Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and
• 1.75x up to 20 ft (6.10 m).• Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)• Initial detection will occur earlier when walking across sensor’s field of view than when
walking directly at sensor
Sensor Coverage PatternMini 360° Lens
Basic nLight Zone
*The presetting on the automatic dimming photocell is 5fc.
nLight Wired NetworkingThe nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls.For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy.
nLight AIR WirelessnLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated rES 7 smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.
Sequence of Operation
MIN
LIGHT
LEVE
L
MAX
17.5 MINTIME DELAY
2.5 MIN ATA 1% LEVEL
LIGHTS OFF LIGHTS ONLIGHTS ON
Room Unoccupied
OccupantsDetected In The Space
Sensor Detects Motion
MOTION NO MOTION MOTION
SEQUENCE OF OPERATION
N
H
nLight AIR rPODB 2P DX Mobile Device
1. Install the nLight® AIR fixtures with embedded smart sensor
2. Install the wireless battery-powered wall switch
3. With CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome
Simple as 1,2,3
N
H
N
H
Sensor Options
Option Automatic Dimming Photocell
Occupancy Sensing nLight Wired Networking
nLight AIR Networking
nLight AIR ZonePIR PDT
MSD7 X
NES7 X X
NES7ADCX X X X
NESPDT7 X X
RES7N X X X
RES7Z X X X
WL4-LED
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/29/17
WL4 Wall Bracket & Surface Mount LED
SpecificationsLength: with sensor - 50-15/16 (129.40)
without sensor - 46-13/16 (118.90)
Height: with sensor - 3-11/16 (9.3)
without sensor - 3-7/8 (9.7)
Width: 4-3/4 (12.1)
MOUNTING DATAFor unit installation; surface ceiling or wall mounting.
3-11/16(9.3)
3-7/8(9.7)
4-3/4(12.0)
4-3/4(12.0)
With sensor
Without sensor
PHOTOMETRICS
WL4 30L EZ1 LP840, 3250.8 delivered lumens, test no. LTL25482P5, tested in accordance to IESNA LM-79
0° 20°
40°
60°
80°
90°
0°0°0° 90°
180°
100200300400500600700800900
Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 70%50%30% 50%30%10% 50%30%10%
116104948578726661575350
11699857466585247434037
11694786656494339353129
11295827263575146423936
11291756455484238343128
11287705748423632282523
10488766759534843403634
10485716052464036322927
10481665546403531272522
RC
R
0123456789
10
Zonal Lumen SummaryZone Lumens % Lamp % Fixture0° - 30°0° - 40°0° - 60°0° - 90°90° - 120°90° - 130°90° - 150°90° - 180°0° - 180°
7011143203228292563103864213251
21.635.262.587.07.99.511.913.0
100.0
21.635.262.587.07.99.511.913.0
100.0
CP Summary0° 90
0°5°15°25°35°45°55°65°75°85°90
912901856777666542412279151445
912910879823745650549444346257219
All dimensions are inches (centimeters) unless otherwise noted.DIMENSIONS
3-3/8(8.1)
17-3/4(45.1)
1-5/8(4.1)
1-3/8(3.5)
1(2.5)
46(116.8)
22-3/8(59.4)
3-3/8(8.1)
1-3/8(3.5)
1(2.5)
2-1/4(5.7)
1-5/8(4.1)
Performance Data
Lumen package Input watts Lumens LPW
20L LP830 18.7 2050 110
20L LP835 18.7 2152 115
20L LP840 18.7 2255 121
20L LP850 18.7 2410 129
30L LP830 28.2 2952 105
30L LP835 28.2 3095 110
30L LP840 28.2 3251 115
30L LP850 28.2 3239 115
40L LP830 39.5 3927 99
40L LP835 39.5 4124 104
40L LP840 39.5 4325 110
40L LP850 39.5 4571 116
WL4-LED
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/29/17
Catalog Number
Notes
Type
Page 1 of 2
LED Striplight
CDS
FEATURES & SPECIFICATIONSINTENDED USE — Inspired by classic fluorescent strip channels, this LED fixture offers a traditional appearance that incorporates the latest technology. Available in several color temperatures, lumen packages and lengths. Ideal for use in commercial, retail, office, warehouse and display applications. Certain airborne contaminants can diminish integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION — Compact-design channel and cover are formed from code-gauge cold-rolled steel. Easy to install row aligner bracket included for continuous row mounting.
Finish: High-gloss, baked white enamel (standard).
OPTICS — LEDs provide 80+ color rendering index (CRI) at 3500 K, 4000 K and 5000 K. Diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of traditional fluorescent lamps.
Lumen output up to 1,000 lumens per foot for the 4' and 8' models. Lumen output delivers 2,200 per foot for the 2' model. Luminaire should be installed in applications where ambient temperatures do not exceed maximum ambient operating temperature of 95˚F (35˚C).
ELECTRICAL — This fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations. Also tested to withstand a maximum line surge of 2kV/1kA combination wave for indoor locations. For applications requiring higher level of protection additional surge protection must be provided.
INSTALLATION — Fixture may be surface or suspension mounted with appropriate mounting options (see accessories). Aligner locks in place for easy continuous row mounting.
LISTINGS — CSA certified to US and Canadian safety standards and listed suitable for damp locations. Minimum starting temperature at -40°F (-40°C). Maximum ambient operating temperature of 95˚F (35˚C).
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
INDUSTRIAL CDS
Accessories: Order as separate catalog number.
HC36 Chain hanger and jack chain, 36" (pair)ZACVH Aircraft cable 10' (one pair)SQ Swivel-stem hanger (specify length in 2" increments)
Series Length Voltage Driver Color temperature Color rendering index Options Finish
CDS LED striplight L24 24"L48 48"L96 96"
MVOLT 120-277V347 347V
DM 0-10V dimming 35K 3500 K40K 4000 K50K 5000 K
80CRI 80 CRI90CRI 90 CRI
(blank) NonePLR1LVG Plug-in wiring
low voltage
WH White
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: CDS L48 MVOLT DM 40K 80CRI WH
D
IMMABLE
TM
Page 2 of 2
CDS
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 www.lithonia.com © 2016-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/07/17
CDS LED Striplight
PHOTOMETRICSPlease see www.lithonia.com.
DIMENSIONSAll dimensions are shown in inches (centimeters) unless otherwise noted.
WEIGHT: (may vary with options or accessories)
L24: 2.6 lbs (1.189 kgs)
L48: 5 lbs (2.267 kgs)
L96: 10 lbs (4.535 kgs)
CDS L24 MVOLT (80CRI)
Lumens Wattage LPW
35K 2,119
21
100
40K 2,177 104
50K 2,274 108
CDS L48 MVOLT (80CRI)
Lumens Wattage LPW
35K 4,146
38
109
40K 4,211 111
50K 4,366 115
CDS L96 MVOLT (80CRI)
Lumens Wattage LPW
35K 8,872
77
115
40K 9,010 117
50K 9,342 121
OPERATIONAL DATA
47.99
2.13
2.6247.99
23.99
2.15
2.5723.99
2FT Assembly
4FT Assembly
8FT Assembly
96.01
2.15
2.6296.01
47.99
2.13
2.6247.99
23.99
2.15
2.5723.99
2FT Assembly
4FT Assembly
8FT Assembly
96.01
2.15
2.6296.01
47.99
2.13
2.6247.99
23.99
2.15
2.5723.99
2FT Assembly
4FT Assembly
8FT Assembly
96.01
2.15
2.6296.01
Luminaire Type:Catalog Number(autopopulated):
GOTHAM ARCHITECTURAL DOWNLIGHTING | P 800.315.4982 | gothamlighting.com
© 2011-2017 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/24/17. Specifications subject to change without notice.PAGE 1 OF 4
EVO-6-SHOWER
Gotham Architectural DownlightingLED Downlights
6” Evo®
Non-Conductive Shower Light
Solid-State Lighting
OPTICAL SYSTEM• Face plate made of impact-modified acrylic for excellent durability and light
transmission• “Dead front” shower light for added safety• White painted flangeMECHANICAL SYSTEM• 16-gauge galvanized steel construction; maximum 1-1/2” ceiling thickness• Telescopic mounting bars maximum of 32” and minimum of 15”, preinstalled,
4” vertical adjustment• Toolless adjustments post installation• Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 90°C• Light engine and driver accessible through apertureELECTRICAL SYSTEM• Fully serviceable and upgradeable lensed LED light engine • 70% lumen maintenance at 60,000 hours
• Tested according LM-79 and LM-80 standards• Overload and short circuit protected• 2.5 SDCM; 85 CRI typical, 90+ CRI optionalLISTINGS• Fixtures are CSA certified to meet US and Canadian standards; wet location,
covered ceiling• IP65 rated; suitable for steam room applicationsWARRANTY• 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end user environment and application. All values are design or typical values, measured under laboratory conditions at
25° C.
EXAMPLE: EVO 35/10 6DFR MVOLT EZ1
Series Color temperature Nominal lumen values Aperture Trim style Voltage
EVO 27/ 2700 K30/ 3000 K35/ 3500 K40/ 4000 K
10 1000 lumens15 1500 lumens20 2000 lumens25 2500 lumens30 3000 lumens
35 3500 lumens40 4000 lumens45 4500 lumens
6 DFR Dead (non-conductive) front regressedDFD Dead (non-conductive) front dropDFRAMF Dead (non-conductive) front regressed,
antimicrobial finishDFDAMF Dead (non-conductive) front drop,
antimicrobial finish
MVOLT120277347
Driver1 Options
EZ10 eldoLED 0-10V ECOdrive. Linear dimming to 10% min.EZ1 eldoLED 0-10V ECOdrive. Linear dimming to 1% min.EZB eldoLED 0-10V SOLOdrive. Logarithmic dimming to <1%. EDAB eldoLED SOLOdrive DALI. Logarithmic dimming to <1%. EDXB eldoLED POWERdrive DMX with RDM (remote device management). Square Law
dimming to <1%. Includes termination resistor. Refer to DMXR Manual. EXA1 XPoint Wireless, eldoLED 0-10V ECOdrive. Linear dimming to 1%. Refer to
XPoint tech sheet. EXAB XPoint Wireless, eldoLED 0-10V SOLOdrive. Logarithmic dimming to <1%.
Refer to XPoint tech sheet.ECOS22,3 Lutron® Hi-Lume® 2-wire forward-phase driver. Minimum dimming level
1%. Minimum lumen 1000/Maximum lumen 3000.ECOS32,3 Lutron® Hi-Lume® 3-wire or EcoSystem® dimming driver. Minimum dim-
ming level 1%. Minimum lumen 1000/Maximum lumen 4500.
SF Single fuse. Specify 120V or 277V.ELR4 Emergency battery pack with remote test switchNPS80EZ3 nLight® dimming pack controls 0-10V eldoLED drivers.NPS80EZER3,5 nLight® dimming pack controls 0-10V eldoLED drivers. ER
controls fixtures on emergency circuit. N807 nLight® Lumen CompensationBGTD Bodine generator transfer deviceCRI90 High CRI (90+)CP6 Chicago plenumRRL__ RELOC®-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
ACCESSORIES order as separate catalog numbers (shipped separately)
SCA6 Sloped ceiling adapter. Degree of slope must be specified (5D, 10D, 15D, 20D, 25D, 30D). Ex: SCA6 10D. Refer to TECH-190.CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 5”). Adds ~4” to fixture height.ISD BC 0-10V wallbox dimmer. Refer to ISD-BC.
FEATURES
ORDERING IN
FORMATION
A+ Capable options indicated by this color background.
GOTHAM ARCHITECTURAL DOWNLIGHTING | P 800.315.4982 | gothamlighting.com
© 2011-2017 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/24/17. Specifications subject to change without notice. PAGE 2 OF 4
EVO-6-SHOWER
6” EVONon-Conductive Shower LightSolid-State Lighting
PHOTOM
ETRY
All dimensions are inches (centimeters) unless otherwise noted.
ORDERING NOTES
1. Refer to TECH-240 for compatible dimmers.2. Not available with nLight® and XPoint options.3. Specify voltage. ECOS2 not available with 277V.4. For dimensional changes, refer to TECH-140. Not available with 347V.
5. For use with generator supply EM power. Will require an emergency hot feed and normal hot feed.
6. ELR not available. CP and ECOS2 - 3000 lumen max. CP and ECOS3 - 4000 lumen max. CP, ECOS2/ECOS3 and EL - 2000 lumen max.
7. Fixture begins at 80% light level. Must be specified with NPS80EZ or NPS80EZER.
DIMEN
SIONAL DATA
ELECTRICALN
OTES
14 916 [37.0]
211316 [55.4]
9 716 [24.0]
DIMENSIONS FOR CHICAGO PLENUM
Aperture: 6-1/4 (15.9)Ceiling Opening: 7-1/8 (18.1)Overlap Trim: 7-1/2 (19.1)
EVO 6DFR
EVO 6DFD
7 916 [19.2]
758 [19.4]
1578 [40.3]
13 316 [33.5]
1116 [1.7]
EMERGENCY LUMEN OUTPUT
LUMENS WATTAGE INITIAL OUTPUT
1000 9.6 1000
1500 9.6 1000
2000 9.6 1000
2500 9.6 1000
3000 9.6 1000
3500 9.6 1000
4000 9.6 1000
4500 9.6 1000
GOTHAM ARCHITECTURAL DOWNLIGHTING | P 800.315.4982 | gothamlighting.com
© 2011-2017 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/24/17. Specifications subject to change without notice.PAGE 3 OF 4
EVO-6-SHOWER
PHOTOM
ETRY
6” EVONon-Conductive Shower Light
Solid-State Lighting
PHOTOMETRY NOTES
• Tested in accordance with IESNA LM-79-08.• Tested to current IES and NEMA standards under stabilized laboratory conditions.• CRI: 85 typical.
LUMEN OUTPUT MULTIPLIER - CRI
CRI FACTOR
80 CRI 1
90 CRI 0.79
LUMEN OUTPUT MULTIPLIER - CCT
CRI FACTOR
4000 K 1.035
3500 K 1
3000 K 0.973
2700 K 0.938
LUMEN OUTPUT MULTIPLIER - TRIM FINISH
FINISHCLEAR
(AR)PEWTER
(PR)WHEAT (WTR)
GOLD (GR)
WHITE (WR/WRAMF)
BLACK (BR)
Specular (LS) 1.00 0.88 0.83 0.95 N/A N/A
Semi-specular (LSS) 0.95 0.84 0.79 0.90 N/A N/A
Matte-diffuse (LD) 0.85 0.73 0.69 0.80 N/A N/A
Paint N/A N/A N/A N/A 0.87 0.73
Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance: Single Luminaire 30” Above Floor
EVO 35/45 6DFR INPUT WATTS: 44, DELIVERED LUMENS: 2763.1, LM/W=62.8 , 1.0 S/MH, TEST NO. 2919
EVO 35/45 6DFD INPUT WATTS: 45, DELIVERED LUMENS: 2760, LM/W=61.3, 1.0 S/MH, TEST NO. 2920
0° 20°
40°
60°
80°
800
1600
2400
Ave Lumens05152535455565758590
2399240022831720922364143753440
22863578057929113375365
Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°
90° - 180°0° - 180°
1643.42222.92647.32763.2
0.02763.2
59.580.495.8100.00.0
*100.0*Efficiency
%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910
1191091009285797368646056
119106968779726762575450
119104928274676257534946
116107999184787368635956
116105948678726661575350
116102918174676257534946
111103958882767166625855
111101928477716561575350
11199898073676157524946
RC
R
50% beam -51.8°
10% beam -81.8°
MountingHeight
Inital FCCenterBeam Diameter FC Diameter FC
8.010.012.014.016.0
79.342.726.618.113.2
5.37.39.211.213.1
39.721.313.39.16.6
9.513.016.519.923.4
7.94.32.71.81.3
0° 20°
40°
60°
80°
800
1600
Ave Lumens05152535455565758590
2037203818961442893487222118743517
1935286575613792051207838
Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°
90° - 180°0° - 180°
1378.81940.22523.92760.2
0.02760.2
50.070.391.4100.00.0
*100.0*Efficiency
%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910
119108978981746964595552
119104928274676156524845
119101887769625651474440
116105968780736863595551
116102918173676156524845
116100877668625651474340
111101928478726662575450
11199887972666055514844
11197857567615551474340
RC
R
50% beam -51.6°
10% beam -87.3°
MountingHeight
Inital FCCenterBeam Diameter FC Diameter FC
8.010.012.014.016.0
67.336.222.615.411.2
5.37.39.211.113.1
33.718.111.37.75.6
10.514.318.121.925.8
6.73.62.31.51.1
GOTHAM ARCHITECTURAL DOWNLIGHTING | P 800.315.4982 | gothamlighting.com
© 2011-2017 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 04/24/17. Specifications subject to change without notice. PAGE 4 OF 4
EVO-6-SHOWER
CONTROLS
6” EVONon-Conductive Shower LightSolid-State Lighting
A
A
B
B
AnPS 80 EZ
nCM PDT 9
nCM ADCX
nPS 80 EZ
EXAMPLEGroup Fixture Control**Application diagram applies for �xtures with eldoLED drivers only.
nPS 80 EZ Dimming/Control Pack (qty 2 required)nPODM 2P DX Dual On/O�/Dim Push-Button WallPodnCM ADCX Daylight Sensor with Automatic Dimming ControlnCM PDT 9 Dual Technology Occupancy Sensor
Description: This design provides a dual on/o�/dim wall station that enables manual control of the �xtures in Row A and Row B separately. Additionally, a daylight harvesting sensor is provided so the lights in row B can be con�gured to dim automatically when daylight is available. An occupancy sensor turns o� all lights when the space is vacant.
nPODM 2P DX
B
C
C
AOPTIONAL
WIRING KEY
BA C
CAT-5e Cable Line Power Low VoltageDimming Wires
nLight® Control Accessories: Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations Model number Occupancy sensors Model numberOn/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 / nCM PDT 9On/Off & Raise/Lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM 10 / nCM PDT 10Graphic Touchscreen nPOD GFX [color] Wide view (PIR / dual tech) nWV 16 / nWV PDT 16Photocell controls Model number Wall Switch w/ Raise/Lower (PIR / dual tech) nWSX LV DX / nWSX PDT LV DXDimming nCM ADCX Cat-5 cables (plenum rated) Model number
10', CAT5 10FT CAT5 10FT J115', CAT5 15FT CAT5 15FT J1
Choose Wall Controls.nLIGHT o�ers multiple styles of wall controls – each with varying features and user experience.
Push-Button WallPodTraditional tactile buttonsand LED user feedback
Graphic WallPodFull color touch screenprovides a sophisticatedlook and feel
A
A
B
B
AnPS 80 EZ
nCM ADCX
nCM PDT 9
nPS 80 EZ
nPODM 2P DX
B
C
C
AOPTIONAL
WIRING KEY
BA C
CAT-5e Cable Line Power Low VoltageDimming Wires
Capable LuminaireThis item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
EMERGENCY LQM
Catalog Number
Notes
Type
ORDERING INFORMATION Example: LQM S W 3 R 120/277 EL N
LQM
Family Face type Housing color Number of faces Letter color Input voltage2 Operation Options
LQM S StencilP Panel1
(blank) BlackW White
3 Single face with extra faceplate and color panel
R RedG Green
120/277 Dual voltage
(blank) AC onlyX2 Primary and
secondary AC inputs provided 3
EL N Nickel cadmium battery
(blank) NoneNOM NOM certified for Mexico4
SD Self-diagnostics5
SDFIFA Self-diagnostics, fire alarm flashing interface and flashing emergency operation and intermittent audible alarm (one flash/one second)5
7-5/8(19.3)
11-3/4(29.8)
2(5.1)
All dimensions are inches (centimeters) unless otherwise specified.
Specifications
Length: 11-3/4 (29.8)
Depth: 2 (5.1)
Height: 7-5/8 (19.3)
Weight: 2.6 lbs (1.2 kgs)
Accessories: Order as separate item.
ELA WG1 Back-mount wireguard6 ELA WGEXE End-mount wireguard6
ELA WGEXT Top-mount wireguard6 ELA LQMUS12 12” stem kit7
FEATURES & SPECIFICATIONSINTENDED USE — Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption.
CONSTRUCTION — Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corro-sion-proof. UL94V-0 flame rating. UV-stable resin resists discoloration from natural and man-made light sources.
Rugged unibody housing snaps together with no additional mechanical fasteners. Faceplate and back cover are inter-changeable on housing. Positive snap-fit tabs hold faceplate securely, yet easily removable for lamp compartment access.
Universal directional Chevron inserts are easily removed and reinserted. Uniform illumination without shadows or hot spots. Reinforced, impact-resistant color panels. Letters 6” high with 3/4” stroke, with 100 ft. viewing distance rating, based upon UL924 standards.
U.S. Patent No. 5,526,251; 5,611,163; 5,739,639; 5,954,423; 5,988,825; 6,152,581; D383,501 ; D495,751 and 6,502,044. Other patents pending.
OPTICS — LEDs mounted on printed circuit boards. Low energy consumption – less than one watt. LED lamp operates in normal (AC input) and emergency (DC input) modes.
The typical life of the exit LED lamp is 10 years.
ELECTRICAL — Dual voltage input capability (120/277V).
Low-voltage disconnect prevents excessively deep discharge that can permanently damage battery. Conve-niently located test switch and LED provide visual and manual means of monitoring system.
Constant-current series charger minimizes energy consumption and provides low operating costs. Printed circuit boards are 100% quality tested during manufacturing. Current-limiting charger circuitry protects printed circuit boards from shorts.
AC/LV reset (line latch) allows battery connection before AC power is applied and aids in preventing battery damage from deep discharge.
Crystal oscillator timing system with watchdog protection for precision accuracy.
Brownout protection is automatically switched to emergency mode when supply voltage drops below 80% of nominal.
Battery: Sealed, maintenance-free nickel-cadmium battery delivers 90-minutes capacity to emergency lamps. Two-state constant-current charge maximizes battery life and automatically recharges after battery discharge.
Diagnostics: Single-point microcomputer control for all electronic features.
Single multi-chromatic LED indicator to display two-state charging, test activation and three-state diag-nostic status.
Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection. Self-diagnostic testing for five minutes every 30 days and 30 minutes every six months.
Diagnostic evaluation of LED light source, AC to DC transfer, charging and battery condition. Continuously monitors AC functionality.
INSTALLATION — Universal (top-, end-, or back-) mounting. Easily removed mounting knockouts. J-box pattern on back panel. Housing snaps to canopy with four positive-locking tabs. Cam-locking pin tightly secures housing to canopy.
Ships standard with additional face plate.
LISTINGS — UL damp location listed 50°-104°F (10°-40°C) standard. NOM Certified (see options). Meets UL924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards. NEMA Premium certified.
Meets all applicable FCC requirements.
Notes
1 Only available in custom signage. See spec sheet, Custom-Signage.2 Some special voltages available. Consult factory. 3 Must specify input voltage 120 or 277. Not available with other options.4 Available with stencil or panel faces in white housing. 5 Only available with EL N operation.6 See spec sheet ELA-WG.7 See spec sheet ELA-Stemkits.
Thermoplastic Exits
LQMLED LAMPS
For shortest lead times, configure product using bolded options.
WARRANTY — 5-year limited warranty. (Battery is prorated.) Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
LQM
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770.981.8141 www.lithonia.com ©1993-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/16/17
LQM LED, Quantum®
MOUNTINGAll dimensions are inches (centimeters) unless otherwise specified.
Shipping weight: 2.6 lbs. (1.2 kgs.)
SPECIFICATIONS
5-5/8(14.7)
7-5/8(19.3)
7-5/8(19.3)
3-7/8(9.6)
8-3/8(21.3)
11-3/4(29.8)
11-3/4(29.8)
5-7/8(14.9)
4-1/2(11.4)
2(5.1)
Top Mounting
End Mounting
Back Mounting
ELECTRICAL
Primary Circuit
Type1 Typical LED life2
Supply voltage
Input watts
Max. amps
Red LED AC Only 10 years 120 .62 .05277 .69 .06
Green LED AC Only 10 years120 .62 .05277 .74 .06
Red LED Emergency 10 years 120 .71 .05277 .92 .06
Green LED Emergency 10 years120 .66 .05277 .70 .06
BATTERY
Nickel Cadmium
VoltageShelflife3
Typicallife3 Maintenance4
Optimumtemperature5
1.2 3 years 7-9 years none 50°F - 104°F (10°C - 40°C)
Notes
1 LED lamps operate in normal (AC input) and emergency (DC input) modes.
2 Based on continuous operation. The typical life of the exit LED lamp is 10 years.
3 At 77°F (25°C).
4 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
5 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower tempera-tures affect life and capacity.