Upload
nguyenhanh
View
231
Download
0
Embed Size (px)
Citation preview
King Industries, Inc. Additives & Synthetic Base Oils
for Use in Lubricants with Incidental Food Contact
NSF HX-1 Registered Products:
NA-LUBE® KR - Synthetic Base Oils NA-LUBE® AW - Multi-functional Additive K-CORR® NF - Yellow Metal Deactivator
NA-LUBE® AO - Antioxidant NA-SUL® - Corrosion Inhibitor
Visit Us At: www.kingindustries.com
CONTACT King Industries, Inc. USA Headquarters Science Road Norwalk, CT 06850 PH: 203-866-5551 FAX: 203-866-0425 Email: [email protected] King Industries - Europe Noordkade 64 2741 EZ Waddinxveen, The Netherlands PH: +31 182-631360 FAX: +31 182-621002
Innovative Products Supported By
Dedicated Technical Service
King Industries now offers a number of high performance additives and base oils/base oil modifiers that are NSF HX-1 registered for use in lubricants with incidental food contact. Complying with FDA CFR 178.3570, these specialty products include: NA-LUBE® KR-006FG, KR-015FG, and KR-029FG are unique alkylated aromatic base oils with good sol-
ubility and exceptional hydrolytic and thermo-oxidative stability.
NA-LUBE® AW-6400FG is a high performance, multi-functional additive that offers anticorrosion, antiwear and extreme pressure properties.
NA-LUBE® AO-142 is a liquid, easy to handle, diphenylamine antioxidant.
K-CORR® NF-200 is an ashless, yellow metal deactivator/corrosion inhibitor.
NA-SUL® CA-770FG is a premium rust inhibitor that provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks.
King Industries NSF HX-1 Registered Products
PRODUCT Chemical Composition
Viscosity @ 40°C ASTM D445 DIN 51 550
Density @ 25°C ASTM D 4052
Misc. Maximum Allowable
Treat Level
NSF HX-1 Registration #
SYNTHETIC BASE OILS & BASE OIL MODIFIERS
NA-LUBE®
KR-006FG
Proprietary Alkylated Aromatic
36 mm2/s (cSt) 0.90 g/ml
7.5 lbs./gal.
Pour Point ASTM D 97
-33ºC 100%* 143717
NA-LUBE®
KR-015FG
Proprietary Alkylated Aromatic
124 mm2/s (cSt) 0.884 g/ml
7.40 lbs./gal.
Pour Point ASTM D 97
-47 °C 100%* 140436
NA-LUBE®
KR-029FG
Proprietary Alkylated Aromatic
174 mm2/s (cSt) 0.875 g/ml
7.29 lbs./gal.
Pour Point ASTM D 97
-26°C 100%* 141220
HIGH PERFORMANCE ADDITIVES - Liquid Rust Preventive/Demulsifier
NA-SUL®
CA-770FG
Neutral Calcium Sulfonate in PAO
214 mm2/s (cSt) 0.91 g/ml 7.6 lbs./gal.
165ºC 10% by weight
143718
LIQUID MULTI-FUNCTIONAL ADDITIVE - Anticorrosion, Antiwear & Extreme Pressure
NA-LUBE®
AW-6400FG Amine Salts of Aliphatic Phosphoric Acid Esters
1400 mm2/s (cSt) 0.97 g/ml
8.06 lbs./gal.
Content Nitrogen
2.4% Phosphorus
8.3%
0.5% by weight
141635
LIQUID DIPHENYLAMINE BASED ANTIOXIDANT
NA-LUBE®
AO-142
Butylated, Octylated Diphenylamine
280 mm2/s (cSt) 0.98 g/ml
8.20 lbs./gal. Nitrogen Content
4.5% 0.5% by weight
140584
LIQUID YELLOW METAL DEACTIVATOR/CORROSION INHIBITOR
K-CORR®
NF-200 Proprietary Heterocyclic Derivative
78 mm2/s (cSt) 0.95 g/ml
7.90 lbs./gal.
Flash Point, COC
ASTM D 92 DIN 51376
170°C
0.1% by weight
141124
* Not to exceed minimum amount required to achieve desired technical effect
Synthetic Base Oils NA-LUBE
® KR-006FG, KR-015FG & KR-029FG
These unique synthetic base oils are used to formulate high performance lubricants and greases. They offer outstanding solubility and excellent hydrolytic and thermo-oxidative stability. The chart that follows offers a relative, property comparison of the KR products to other commonly used HX-1 base fluids.
Property NA-LUBE KR-006FG, KR-015FG & KR-029FG
PAO Esters White Oils
Thermo-oxidative Stability Excellent Good Good to Excellent Fair
Thermal Stability Excellent Excellent Excellent Good
Hydrolytic Stability Excellent Excellent Poor Excellent
Additive Solubility Good to Excellent Poor Excellent Good
Thermal Stability
The Cincinnati Milacron Thermal Stability Test is used to evaluate the thermal stability of fluids in the pres-ence of copper and steel at elevated temperatures for 168 hours. Normally, run at 135°C, KR-015FG and a PAO were tested at elevated temperatures (200°C and 225°C) both neat and with an package containing an antioxidant and a yellow metal deactivator. Not surprisingly, due to breakdown and polymerization, the PAO experienced a very high viscosity increase.
RPVOT - ASTM D 2272 - Rotating Pressurized Vessel Oxidation Test
BASE FLUID PAO* KR-015FG KR-029FG
Induction Time (Minutes) Neat 19.4 87.0 89.0
Induction Time Minutes with 0.2% NA-LUBE AO-142
34.2 409.8 532.2
Thermo-Oxidative Stability Both KR-015FG and KR-029FG demon-strated significant performance advantages over PAO (blended to an equal viscosity) when tested in the Rotating Pressure Ves-sel Oxidation Test (RPVOT-ASTM D 2272) as neat fluids and with the addition of 0.2%antioxidants. When tested using Pressure Differential Scanning Calorimetry versus both a white oil and PAO, at 200°C and 210° C, the KR products again demonstrated their superior oxidative stability.
PDSC - ASTM D 3895 - Pressure Differential Scanning Calorimetry
BASE FLUID PAO White Oil KR-015FG KR-029FG
Induction Time Minutes @ 200˚C <1 <1 22 10
Induction Time Minutes @ 210˚C <1 <1 9 4
CINCINNATI MILACRON THERMAL STABILITY TEST - Modified to higher temperatures, 200°C, 225°C
Neat Fluid @ 200°C Neat Fluid @ 225°C
BASE FLUID Total Sludge (mg/100ml)
% Viscosity Increase
Total Sludge (mg/100ml)
%Viscosity Increase
KR-015FG 2.85 8.36 19.98 20.32
PAO* 2.15 100.67 13.65 332.75
* PAO viscosity of 124 cSt @ 40°C
Food grade HX-1 Aluminum Complex Grease ASTM 1743 Fail
0.5% NA-SUL CA-770FG in HX-1 Food Grade Aluminum Complex ASTM 1743 Pass
NA-SUL® CA-770FG Rust & Corrosion Inhibitor
Additives —- 1.5% NA-SUL CA-770FG 0.5% NA-LUBE AO-142
Base Grease Al Complex Al Complex
ASTM D 5969 (24 hrs.) Water Type Rating
5% SSW
Fail
5% SSW
Pass
SSW = Synthetic Sea Water
Additives —- 0.5% NA-SUL CA-770FG 0.5% NA-LUBE AO-142
Base Grease Al Complex Al Complex
ASTM D 1743 (48 hrs.)* Water Type Rating
Distilled
Fail
Distilled
Pass
* Performance Shown in Pictures Above
Base Oil PAO 6 cSt (39 cSt at 40˚C)
White Oil (40 cSt at 40˚C)
NA-LUBE KR-006FG (37 cSt at 40˚C)
Treat Level 0.05% 0.05% 0.05%
Steel Corrosion (ASTM D 665, DIN 51 585) B
Pass
Pass
Pass
Demulsibility (ASTM D 1401, DIN 51 599) Oil—Water—Emulsion Time (Minutes)
41 - 39 - 0
5
42 - 38 - 0
10
42 - 38 - 0
10
Liquid Rust Preventive/Demulsifier NA-SUL
® CA-770FG
NA-SUL CA-770FG is a premium rust inhibitor for petroleum and synthetic lubricants, greases, and rust preventive fluids. It provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks.
Multi-functional Additive NA-LUBE
® AW-6400FG
NA-LUBE AW-6400FG is an ashless, HX-1 approved, multi-functional additive that offers anticorrosion, antiwear and EP properties. It is especially well suited for food grade lubricants that require rust protection and high load capacity (FZG) at low treat levels. Typically used in the 0.10 - 0.50% range, NA-LUBE AW-6400FG is: Light in color An easy to handle, liquid Soluble in all common food grade basestocks and most common solvents
0.2% NA-LUBE AO-142, 0.5% Ashless Dithiocarbamate 0.2% AO-142, 0.5% Ashless Dithiocarbamate and 0.5% NA-LUBE AW 6400FG
Corrosion Inhibition Comparison (Synthetic Sea Water - Steel Corrosion Test)
FORMULATIONS
TESTS All HX-1 Base Oils Treated with 0.50% NA-LUBE AW-6400FG
HX-1 Approved Base Oils
PAO 10
White Oil
PAG
(water soluble)
NA-LUBE KR-015FG
NA-LUBE KR-029FG
Ester
Viscosity @ 40°C (ASTM D 445, DIN 51 550)
66 cSt 110 cSt 120 cSt 124 cSt 174 cSt 220 cSt
Viscosity @ 100°C (ASTM D 445, DIN 51 550)
10 cSt 12 cSt 27 cSt 14 cSt 19 cSt 20 cSt
Steel Corrosion (ASTM D 665 A & B, DIN 51 585)
Pass Pass Pass (stain) Pass Pass Pass (stain)
Demulsibility (ASTM D 1401, DIN 51 599) Oil-Water-Emulsion Separation Time (Minutes)
41-39-0
15
41-38-01
15 NA
42-38-0
20
39-41-0
34
14-12-64
30
Copper Corrosion (ASTM D 130, DIN 51 759) 3 hours, 100°C 24 hours, 100°C
1a 1b
1a 1b
1a 1b
1a 1b
1a 1b
1a 1b
Four Ball Weld Load (ASTM D 2783) OK Load (kgf) Weld Load (kgf)
160 180
140 160
160 180
140 160
140 160
140 160
Four Ball Wear (ASTM D 4172) Scar Diameter (mm) 1 hour, 75°C, 1200 rpm, 30 kg 1 hour, 75°C, 1200 rpm, 40 kg
0.38 0.49
0.37 0.51
0.51 0.54
0.38 0.45
0.38 0.40
0.40 0.41
FALEX Pin & Vee (ASTM D 3233) lbs.
890 1150 1260 960 1040 860
FORMULATION
TESTS
0.20% NA-LUBE AO-142 0.20% NA-LUBE AO-142 0.50% Ashless Dithiocarbamate
0.20% NA-LUBE AO-142 0.50% Ashless Dithiocarbamate
0.05% K-CORR NF-200
BASE OIL ISO VG 110 - White Oil
Copper Corrosion ASTM D 130, DIN 51 579 3 hours, 100° C 24 hours, 100° C
1a 2a
1b 3b
1a 1b
Demulsibility ASTM D 1401, DIN 51 599 Oil-Water-Emulsion Time (Minutes)
40-40-0 15
40-36-4 30
40-40-0 15
RPVOT ASTM D 2272 Lifetime (Minutes)
141
2670
3735
NA-LUBE AO-142 is a butylated, octylated, diphenylamine antioxidant that can be used at levels up to 0.50% in food grade applications. It is ashless, non-corrosive and solu-ble in a wide range of H-1 base flu-ids. As shown in the test data that follows, additive levels of 0.2% and 0.5% NA-LUBE AO-142 in various base oils resulted in a significant increase in the lifetime as measured by RPVOT - ASTM D 2272. NA-LUBE AO-142 is a liquid product for easy incorporation and imparts enhanced thermal and oxidative stability.
0.2% NA-LUBE AO-142 Testing RPOVT - Rotating Pressure Vessel Oxidation (ASTM D 2272)
Viscosity @ 40°C / 100ºC (cSt)
ASTM D 445 DIN 51 550
Control No Antioxidant
(min)
W/ Base Oil (min)
PAO 10 66 / 10 55 266
White Oil 110 / 12 31 141
PAG (water soluble) 120 / 27 15 40
NA-LUBE KR-015FG 124 / 14 92 443
NA-LUBE KR-029FG 174 / 19 76 905
Ester 220 / 20 115 470
Antioxidant NA-LUBE®
AO-142
K-CORR NF-200 is a HX-1 food grade approved yellow metal deactivator that protects copper and copper alloys against corrosion initiated by active sulfur. K-CORR NF-200 also enhances the oxidation stability of food grade lubricants and greases when used in combination with HX-1 food grade approved NA-LUBE® AO-142 and an ashless dithiocarbamate. K-CORR NF-200 is recommended for formulat-ing high performance food grade circulating and steam turbine oils, hydraulic oils, vacuum oils, and industrial gear oils, as well as greases.
Copper Corrosion ASTM D 130 ISO VG 110 White Oil 24 Hrs. @100°C
A. 0.2% NA-LUBE AO-142, 0.5% ashless dithiocarbamate
B. A + 0.05% K-CORR NF-200
A B
Yellow Metal Deactivator/Corrosion Inhibitor K-CORR®
NF-200
FG-11/13 DISCLAIMERS The results shown reflect data generated by King Industries’ Technical Service Laboratory. Actual results may vary depending on the additive package, base oil, and test equipment design.
The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of product evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assis-tance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. Such testing has not nec-essarily been done by King Industries, Inc. ("King"). The facts, recommendations and suggestions herein stated are believed to be reliable; however, no guaranty or warranty of their accuracy is made. EXCEPT AS STATED, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABIL-ITY, FITNESS OR OTHERWISE. KING SHALL NOT BE HELD LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES. Any statement inconsistent herewith is not authorized and shall not bind King. Nothing herein shall be construed as a recommendation to use any product(s) in conflict with patents covering any material or its use. No license is implied or granted under the claims of any patent. Sales or use of all products are pursuant to Standard Terms and Conditions stated in King sales documents.