1
The challenge It doesn’t take long for algae, barnacles and other marine organisms to aach themselves to anything that floats on rivers and oceans, and this is a major impediment to longer deployments of marine instrumentaon. In tropical waters where growth is rapid, marine instruments are most sensive to fouling. Without efficient biofouling control for sensors and cameras, the sensor probes and opcal windows become covered in growth and the quality of measurements are quickly compromised. Maintenance costs due to biofouling accumulaon consume about half of marine sensor technologies’ operaonal budgets. Maintenance costs due to biofouling accumulaon consume about half of marine sensor technologies’ operabudgets. Most an-fouling coangs are highly toxic to marine organisms, may harm non- target species, and do not perform well in Australia’s tropical waters. The approach As the naon’s tropical marine research agency, the Australian Instute of Marine Science (AIMS) is working with the Department of Defence’s Science and Technology group to examine the applicaon of ultraviolet light (UV-C) as a non-toxic biofouling control for oceanographic sensors and underwater camera systems in tropical waters. When applied on a connuous basis a trial showed the UV-C light was very effecve at eliminang biofouling. UV light provides non-toxic biofouling control for marine instrumentaon AIMS: turning science into soluons Australia’s tropical marine research agency 50% MAINTENANCE VISITS REDUCED BY INSTRUMENT DURABILITY EXTENSION + 6 MONTHS increased accuracy NON TOXIC BIOCIDE FREE REDUCED RISK INVASIVE SPECIES The impact The technology provides a superior level of prevenon, is biocide-free, non- contact, and can be used on a variety of instrument materials and shapes to extend instrument deployment endurance and prolong sensor accuracy (by prevenng sensor driſt). The return on investment for this technology comes through reducing the number of maintenance visits to offshore sensor sites and lessening the frequency of costly mechanical cleaning of instruments. The UV-C biofouling control prolongs the accuracy and reliability of data transmied from the sensors and cameras. This extends maintenance cycles from six months to 12 months for instruments at sites such as weather staon towers or surface buoys, which halves the number of maintenance visits required to service those sites.

AIMS: turning science into solutions · Most anti-fouling coatings are highly toxic to marine organisms, may harm non-target species, and do not perform well in Australia’s tropical

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

Page 1: AIMS: turning science into solutions · Most anti-fouling coatings are highly toxic to marine organisms, may harm non-target species, and do not perform well in Australia’s tropical

The challengeIt doesn’t take long for algae, barnacles and other marine organisms to attach themselves to anything that floats on rivers and oceans, and this is a major impediment to longer deployments of marine instrumentation. In tropical waters where growth is rapid, marine instruments are most sensitive to fouling. Without efficient biofouling control for sensors and cameras, the sensor probes and optical windows become covered in growth and the quality of measurements are quickly compromised. Maintenance costs due to biofouling accumulation consume about half of marine sensor technologies’ operational budgets. Maintenance costs due to biofouling accumulation consume about half of marine sensor technologies’ operatibudgets. Most anti-fouling coatings are highly toxic to marine organisms, may harm non-target species, and do not perform well in Australia’s tropical waters.

The approachAs the nation’s tropical marine research agency, the Australian Institute of Marine Science (AIMS) is working with the Department of Defence’s Science and Technology group to examine the application of ultraviolet light (UV-C) as a non-toxic biofouling control for oceanographic sensors and underwater camera systems in tropical waters.

When applied on a continuous basis a trial showed the UV-C light was very effective at eliminating biofouling.

UV light provides non-toxic biofouling control for marine instrumentation

AIMS: turning science into solutions Australia’s tropical marine research agency

50%MAINTENANCE

VISITS REDUCED BY

INSTRUMENT DURABILITY EXTENSION

+ 6 MONTHS increased accuracy

NON TOXIC BIOCIDE FREE

REDUCED RISK

INVASIVE SPECIES

The impact The technology provides a superior level of prevention, is biocide-free, non-contact, and can be used on a variety of instrument materials and shapes to extend instrument deployment endurance and prolong sensor accuracy (by preventing sensor drift).The return on investment for this technology comes through reducing the number of maintenance visits to offshore sensor sites and lessening the frequency of costly mechanical cleaning of instruments. The UV-C biofouling control prolongs the accuracy and reliability of data transmitted from the sensors and cameras. This extends maintenance cycles from six months to 12 months for instruments at sites such as weather station towers or surface buoys, which halves the number of maintenance visits required to service those sites.