Air Boss T-Series - Trion IAQ

A i r P u r i f i c a t i o n S y s t e m s | w w w. t r i o n i a q . c o m

Air Boss® T-SeriesElectronic Air Cleaners

www. t r ion iaq .com

Engineered Solutions For Clean AirThe TRION® T-Series is ideal for the removal of smoke,

fumes, and oil/coolant smoke and mist. The T-Series has

the ability to clean contaminated indoor air and recirculate it

back to the work area, reducing energy costs by not having

to exhaust conditioned air to the outside. Models T1300,

T2600 and T5200 can be installed either unducted or ducted

for source capture. Models T1001 and T2002 are designed

for in-ducted capture.

Features• Solid State Power Supply

• Spiked Ionizing Blades

• Extra Depth Collector Cells

• Totally Enclosed Fan Cooled Motor

• Electrical Component Box Mounted Out of Air Stream

• Optional Multi-Purpose Plenum

• Motor HP Options for Added Static Pressure

Benefits• Self Glazing Ceramic Insulators: Out of Airstream;

Impervious to Liquids; Provide Operational Longevity and Power Supply Life; Easy to Clean

• Extra Depth Collector Cell with More Dirt Holding Capacity

• Spiked Ionizer: No Ionizing Wires to Replace, Reducing Maintenance and Replacement Cost

• High Efficiency: Up to 95% on Single Pass and 99% on Double Pass Option

• Permanent Ionizer/Collector Elements: No Filter Replacement Cost; Just Wash, Dry and Reinstall

• Low Pressure Drop: Lower Energy Cost to Operate Compared to Media and Cartridge Units

• Hinged Filter Access: No Tools Required for Quick and Easy Service

2


How it WorksThe TRION® T-Series utilizes the principle of Electrostatic

Precipitation. Air is drawn by the motor/blower through a

washable metal mesh pre-filter which traps large dust particles.

The remaining particles, some as small as 0.01 microns, pass

into a strong electrical field (ionizing section) where the particulate receives an electrical charge. The charged particles then pass into

a collector plate section made up of a series of equally spaced parallel plates. Each alternate plate is charged with the same polarity

as the particles, which repel, while the interleaving plates are grounded, which attract and collect.

Air Boss® T- Series Models

Air Boss® T1001

Air Boss® T1300

Air Boss® T2002

Air Boss® T2600 Air Boss® T5200

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

3.0

2.0

1.0

4.0

5.0 1500RPM

0 10000 2000 3000 4000 5000 6000

800RPM700RPM600RPM

2 HP

5 HP

3 HP

2250RPM(MAX. RPM)

2000RPM

1800RPM1600RPM

1400RPM1200RPM

1000RPM800RPM

3.0

4.0

2.0

1.0

0

1 1/2 HP

3/4 HP

1 HP

CFM

3.0

2.0

1.0

02000

CFM

1400RPM

1600RPM

1800RPM

1200RPM

1000 RPM800RPM

(MAX. RPM)

3/4 HP

2 HP

1 HP

1 1/2 HP

0

500 1000 1500

1300RPM1200RPM

1100RPM

1000RPM900 RPM

1400 RPM (MAX. RPM)

0

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

1000 3000CFM

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

3.0

2.0

1.0

4.0

5.0 1500RPM

0 10000 2000 3000 4000 5000 6000

800RPM700RPM600RPM

2 HP

5 HP

3 HP

2250RPM(MAX. RPM)

2000RPM

1800RPM1600RPM

1400RPM1200RPM

1000RPM800RPM

3.0

4.0

2.0

1.0

0

1 1/2 HP

3/4 HP

1 HP

CFM

3.0

2.0

1.0

02000

CFM

1400RPM

1600RPM

1800RPM

1200RPM

1000 RPM800RPM

(MAX. RPM)

3/4 HP

2 HP

1 HP

1 1/2 HP

0

500 1000 1500

1300RPM1200RPM

1100RPM

1000RPM900 RPM

1400 RPM (MAX. RPM)

0

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

1000 3000CFM

T1300 Curves T2600 Curves T5200 Curves

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

3.0

2.0

1.0

4.0

5.0 1500RPM

0 10000 2000 3000 4000 5000 6000

800RPM700RPM600RPM

2 HP

5 HP

3 HP

2250RPM(MAX. RPM)

2000RPM

1800RPM1600RPM

1400RPM1200RPM

1000RPM800RPM

3.0

4.0

2.0

1.0

0

1 1/2 HP

3/4 HP

1 HP

CFM

3.0

2.0

1.0

02000

CFM

1400RPM

1600RPM

1800RPM

1200RPM

1000 RPM800RPM

(MAX. RPM)

3/4 HP

2 HP

1 HP

1 1/2 HP

0

500 1000 1500

1300RPM1200RPM

1100RPM

1000RPM900 RPM

1400 RPM (MAX. RPM)

0

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

AD

DE

D S

TATI

C P

RE

SS

UR

E (i

n. H

20)

1000 3000CFM

Pre-Filter Ionizer Collector

3

Collection Efficiencies at 0.3 Microns (Per Cell)675 CFM 825 CFM 1200 CFM 1450 CFM 1630 CFM 1875 CFM

Single Pass 95% 90% - - - -

Double Pass - 99% 95% 90% - -

Triple Pass - - 98.7% 97.5% 95% 90%

Certified Third-Party Test Data at 0.3 microns using DEHS Aerosol.


Note: Units can be stacked in configurations up to 8000 CFM.

14

498

554

TOP VIEW

470

14

28.5 Dia. Drain Location

606

Power Supply Inside

Electrical Encloser Cover

Mounting HoleLocation

.406 Dia Dimple

625

171

127

DISCHARGE END

51 51 396

533

432

FRONT VIEW

Electrical Junction Box

635

AirFlow

1.00

INTAKE END

50.8 398

432

24 Places8 Dia. Typ.

151

50.8

139.7

482

25.4

98.5

127Typ.

14

498

554

TOP VIEW

470

14


606

Power Supply Inside



.406 Dia Dimple

625

171

127

DISCHARGE END

51 51 396

533

432

FRONT VIEW


635

AirFlow

1.00

INTAKE END

50.8 398

432


151

50.8

139.7

482

25.4

98.5

127Typ.

14

498

554

TOP VIEW

470

14


606

Power Supply Inside



.406 Dia Dimple

625

171

127

DISCHARGE END

51 51 396

533

432

FRONT VIEW


635

AirFlow

1.00

INTAKE END

50.8 398

432


151

50.8

139.7

482

25.4

98.5

127Typ.

14

498

554

TOP VIEW

470

14


606

Power Supply Inside



.406 Dia Dimple

625

171

127

DISCHARGE END

51 51 396

533

432

FRONT VIEW


635

AirFlow

1.00

INTAKE END

50.8 398

432


151

50.8

139.7

482

25.4

98.5

127Typ.

Discharge End

Intake End

T1001 Blowerless

Dimensions 25" L x 25" W x 21" H

Installation Suspended, Wall, Frame or Duct Mounting

Unit Weight 91 Lbs., Shipping Wt. 144 Lbs.

Air Volume Single Pass: 675 - 825 CFMDouble Pass: 825 - 1,450 CFMTriple Pass: 1,450 - 1,875 CFM

Controls On/Off Switch with Indicating Light

Pre-Filter Aluminum Mesh Standard 18.4” L x 18.4” W x .88” DOptional Impinger

Primary Filter Standard Forever Filter — Electronic Ionizer / Collector Cell Optional Bag FilterOptional Absorber Module

After Filter Optional Disposable Charcoal After Filter 18.4” W x 18.4” H x .88” D

Power Supply High Frequency Solid State Design

Efficiency See chart on page 3

General Multiple Units Can be Joined Together for Increased Volume or Higher Efficiency

Standard Specifications for Each Unit

Cabinet 16 Gauge Welded Galvanized Steel

Finish Blue Epoxy Powder Coat

Air Flow Horizontal — Standard Right to Left (Left to Right Option)

Accessories Optional Source Capture Plenum Optional Brass Drain Fitting

Air Boss® T1001 SpecificationsTop View

Front View

4


Air Boss® T1300 Specifications

T1300


Installation Suspended, Wall, Frame Mounting


Motor TEFC, Sealed Ball Bearings, 1725 RPM, Thermal Protected Continuous Duty, U.L. Listed

Motor Options HP Vac Hz Phase Max Amp Max Watt

Standard 3/4 120/230 60 1 11.7/6.1 950

Option 1 208/230/460 60 3 3.5/1.8 900

Blower Belt Driven, Squirrel Cage, Forward Curved, with Sealed Ball Bearings

Air Volume Single Pass: 675 - 825 CFMDouble Pass: 825 - 1,450 CFMTriple Pass: 1500 Maximum CFM


Controls On/Off Switch with Indicating Light Motor Starter (3 Phase Only)

Sound Rating 67 dBA

Pre-Filter Standard - Aluminum Mesh 18.4” L x 18.4” W x .88” DOptional - Impinger

Primary FilterStandard Forever Filter- Electronic Ionizer / Collector CellOptional Bag FilterOptional Absorber Module

After Filter Disposable Charcoal After Filter Option 8.4” W x 18.4” H x .88” D


Ø 28 Drain Location

Electrical Enclosure Cover Power Supply

Ø 10 Dimple Mounting Hole Location

127

625

17114 1115

14

514 470

538

Multi-directional Discharge Grille

533

106

162

84

286

16287

103

286

Electrical Junction BoxBlower Access Door

1143

AirFlow

Ø8 Dia. 12 Plcs.

2551

140

127483

25

397

432

51

98

Typ.

Typ.151

499




127

625

17114 1115

14

514 470

538


533

106

162

84

286

16287

103

286


1143

AirFlow

Ø8 Dia. 12 Plcs.

2551

140

127483

25

397

432

51

98

Typ.

Typ.151

499




127

625

17114 1115

14

514 470

538


533

106

162

84

286

16287

103

286


1143

AirFlow

Ø8 Dia. 12 Plcs.

2551

140

127483

25

397

432

51

98

Typ.

Typ.151

499




127

625

17114 1115

14

514 470

538


533

106

162

84

286

16287

103

286


1143

AirFlow

Ø8 Dia. 12 Plcs.

2551

140

127483

25

397

432

51

98

Typ.

Typ.151

499

Top View

Discharge End

Front View

Intake End




Air Flow Horizontal — Standard Right to Left (Left to Right Opt)

Accessories Optional Source Capture PlenumOptional Brass Drain Fitting

5


Note: Units can be stacked in configurations up to 16000 CFM.

Top View

Front View

Intake End

T2002 Blowerless


Installation Suspended, Wall, Frame Or Duct Mounting


Air Volume Single Pass: 1,350 - 1,650 CFMDouble Pass: 1,650 - 2,900 CFMTriple Pass: 2,900 - 3,750 CFM

Controls On/Off Switch with Indicating Light

Pre-Filter(2) Required

Aluminum MeshStandard 18.4” L x 18.4” W x .88” DOptional Impinger

Primary Filter(2) Required

Standard Forever Filter - Electronic Ionizer/Collector CellOptional Bag Filter Optional Absorber Module

After Filter (2) Required

Optional Disposable Charcoal After Filter 18.4” W x 18.4” H x .88” D



General Multiple Units can be Joined Together forIncreased Volume or Higher Efficiency







21.82

37.75

36.63

.56

1.12 Dia. Drain Location.56 23.87

Power Supply InsideElectrical Enclosure Cover

.406 Dia. Dimple Mounting Hole Location

42.72

5.00

Junction BoxElectrical

25.00

33.752.00

2.00

21.00 17.00

Typ.

1.00

7.50

2.0033.75

17.00

32 Places.312 Dia.

2.005.50

Typ.5.00

19.00

3.871.00

6.75

Air

Flow

21.82

37.75

36.63

.56




42.72

5.00


25.00

33.752.00

2.00

21.00 17.00

Typ.

1.00

7.50

2.0033.75

17.00

32 Places.312 Dia.

2.005.50

Typ.5.00

19.00

3.871.00

6.75

Air

Flow

21.82

37.75

36.63

.56




42.72

5.00


25.00

33.752.00

2.00

21.00 17.00

Typ.

1.00

7.50

2.0033.75

17.00

32 Places.312 Dia.

2.005.50

Typ.5.00

19.00

3.871.00

6.75

Air

Flow

21.82

37.75

36.63

.56




42.72

5.00


25.00

33.752.00

2.00

21.00 17.00

Typ.

1.00

7.50

2.0033.75

17.00

32 Places.312 Dia.

2.005.50

Typ.5.00

19.00

3.871.00

6.75

Air

Flow

6

Discharge End



T2600


Installation Suspended, Wall, Frame Mounting


Motor TEFC, Sealed Ball Bearings, 1725 RPM, Thermal Protected Continuous Duty, U.L. Listed

Motor Options HP Vac Hz Phase Amp. Max

Standard 3/4 120/230 60 1 7

Option 1 1 208/230/460 60 3 3.4/1.7

Option 2 2 208/230/460 60 3 6.4/3.2

Blower Belt Driven, Double Squirrel Cage, Forward Curved,with Sealed Ball Bearings

Air Volume Single Pass: 1,350 - 1,650 CFMDouble Pass: 1,650 - 2,900 CFMTriple Pass: 3,000 Maximum CFM


Controls On/Off Switch with Indicating Light Motor Starter (3 Phase Only)

Sound Rating 71 DBA

Pre-Filter (2) Required

Standard Aluminum Mesh: 18.4" L x 18.4" W x .88" D Optional Impingers

Primary Filter (2) Required

Standard Forever Filter-Electronic Ionizer/Collector Cell Optional Bag Filters Optional Absorber Modules

After Filter (2) Required

Optional Disposable Charcoal After Filter 18.4” W x 18.4” H x 1” D







ØDimple Dimple Mounting Hole Location


127

1085

17114 1115

975930

538

14 Ø 28 Drain Location


533

144

162

84

286 286

99

384162

125

103

286


Blower Access Door

AirFlow

1143

Typ.Ø 8

16 Plcs.

51

432

191 98 25

51

14025

127

483

857

Typ.



127

1085

17114 1115

975930

538



533

144

162

84

286 286

99

384162

125

103

286


Blower Access Door

AirFlow

1143

Typ.Ø 8

16 Plcs.

51

432

191 98 25

51

14025

127

483

857

Typ.



127

1085

17114 1115

975930

538



533

144

162

84

286 286

99

384162

125

103

286


Blower Access Door

AirFlow

1143

Typ.Ø 8

16 Plcs.

51

432

191 98 25

51

14025

127

483

857

Typ.



127

1085

17114 1115

975930

538



533

144

162

84

286 286

99

384162

125

103

286


Blower Access Door

AirFlow

1143

Typ.Ø 8

16 Plcs.

51

432

191 98 25

51

14025

127

483

857

Typ.

Top View

Discharge End

Front View

Intake End

7



T5200

Dimensions 51” L x 41” W x 42” H

Installation Suspended, Wall, or Frame Mounting


Motor TEFC, Sealed Ball Bearings, 1725 RPM, Thermal Protected Continuous Duty, U.L. Recognized

Motor Options HP Vac Hz Phase Max Amps Max Watts

Standard 2 230 / 460 60 3 6.8 / 3.4 1564

Option 1 3 230 / 460 60 3 9.7 / 4.0 2937

Option 2 5 230 / 460 60 3 14.7 / 7.2 4687

Blower Belt Driven, Squirrel Cage, Forward Curved, with Sealed Ball Bearings

Air Volume Single Pass: 2,700 - 3,300 CFMDouble Pass: 3,300 - 5,800 CFMTriple Pass: 6,000 Maximum CFM


Controls On/Off Switch with Indicating Light — Motor Starter

Sound Rating 76 DBA

Pre-Filter(4) Required

Standard Aluminum Mesh 18.4” L x 18.4” W x .88” DOptional Impingers

Primary Filter(4) Required

Standard Forever Filter- Electronic Ionizer / Collector CellOptional Bag Filters Optional Absorber Modules

After Filter(4) Required

Optional Disposable Charcoal Filter18.4” L x 18.4” W x .88” D

Power Supply High Frequency Solid State Design (2 Required)






714

653

930

582

Drain Hole

Ø 29

171537

Air Flow(Std.)

Electrical Connection

12577

484237

139

408

175217

149

119

1054

1295

Air Flow(Std.)

Off

On

Indicator LightsControl Switch

ComponentBox Door

BlowerAccess Cover

(Grille Location ForSide Discharge Unit)

Cell Door

1032

38 51

940

435

70

57

959

Air

Flow

127

714

653

930

582

Drain Hole

Ø 29

171537

Air Flow(Std.)


12577

484237

139

408

175217

149

119

1054

1295

Air Flow(Std.)

Off

On


ComponentBox Door

BlowerAccess Cover


Cell Door

1032

38 51

940

435

70

57

959

Air

Flow

127

714

653

930

582

Drain Hole

Ø 29

171537

Air Flow(Std.)


12577

484237

139

408

175217

149

119

1054

1295

Air Flow(Std.)

Off

On


ComponentBox Door

BlowerAccess Cover


Cell Door

1032

38 51

940

435

70

57

959

Air

Flow

127

714

653

930

582

Drain Hole

Ø 29

171537

Air Flow(Std.)


12577

484237

139

408

175217

149

119

1054

1295

Air Flow(Std.)

Off

On


ComponentBox Door

BlowerAccess Cover


Cell Door

1032

38 51

940

435

70

57

959

Air

Flow

127

Top View

Discharge End

Front View

Intake End

8


Extended Range Products

9

The Model T4002 is a duct-mounted

unit with air movement provided by an

external source, such as an exhaust fan

or air handler. The T4002 consists of

two T2002 Modules stacked vertically,

and contains four washable Ionizing/

Collecting Cells with Stainless Steel

Spiked Ionizers and Self Glazing Ceramic

Insulators. Air volume range is 3200-6400

CFM.

The Model T6002 is a duct-mounted


external source, such as an exhaust

fan or air handler. The T6002 consists

of three T2002 Modules stacked

vertically, and contains six washable

Ionizing/Collecting Cells with Stainless

Steel Spiked Ionizers and Self Glazing

Ceramic Insulators. Air volume range is

4800-9600 CFM.

The Model T8002 is a duct- mounted


external source, such as an exhaust fan

or air handler. The T8002 consists of four

T2002 Modules stacked vertically, and

contains eight washable Ionizing/

Collecting Cells with Stainless Steel

Spiked Ionizers and Self Glazing Ceramic

Insulators. Air volume range is 6400-

12800 CFM.

Model T4002 T6002 T8002

Dimensions (L x W x H) 25" x 42.7" x 42.3" 25" x 42.7" x 63.5" 25" x 42.7" x 84.8"

Installation In-Duct

Unit Weight 300 Lbs. 450 Lbs. 600 Lbs.

Voltage 120/60/1; 240/60/1; 460/60/3

Air Volume 3200-6400 CFM 4800-9600 CFM 6400-12800 CFM


Controls (2) On/Off Switches with Indicating Lights

(3) On/Off Switches with Indicating Lights

(4) On/Off Switches with Indicating Lights

Power Supply (2) High Frequency, Solid State (3) High Frequency, Solid State (4) High Frequency, Solid State

1" Mesh Prefilter - Qty. 4 6 8

Ionizing/Collecting Cell - Qty. 4 6 8

After Filter (Option) - Qty. 1" Charcoal After Filter (4) Required1" Mesh Filter (4) Required

1" Charcoal After Filter (6) Required1" Mesh Filter (6) Required

1" Charcoal After Filter (6) Required 1" Mesh Filter (8) Required

T4002 T6002 T8002





Accessories Brass Drain Fittings; Drain Trays between Modules; Refillable Carbon Modules for Odor Control

Note: T2002 Modules can be stacked up to 5-high and 2-wide for 32000 CFM.

LIMITED

3 Our Electronic Air Cleaners come with a three-year limited warranty.

Mini M.E. Mist CollectorAir Boss MP600M

Learn more about other

TRION® industrial products

by contacting your local

TRION representative or by

visiting us on the web at

www.tr ioniaq.com.

T-TSERIES-0518

Proudly Designed, Engineered, and

Manufactured in the USA.*

TRION® is a registered trademark of Air System Components, Inc. Air System Components, Inc. is a subsidiary of Johnson Controls Inc. All product specifications reflect available information at the printing of this brochure. TRION® reserves the right to revise or modify products and/or specifications without notice. © 2018 TRION®

TRION® 101 McNeill RoadSanford, NC 27330 [email protected]

To help serve you better, please contact us at:

800-458-2379 (fax)

800-884-0002 (tel)

*Manufactured with domestic and foreign components.

Industry Membership:

Indoor Air Quality Since 1947

ISO 9001:2015 Certified

Documents

Air Boss T-Series - Trion IAQ