Upload
dangdiep
View
242
Download
6
Embed Size (px)
Citation preview
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Wireless Transmission Group
ALCATEL-LUCENT 9500 MPR PRODUCT OVERVIEW
2 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• #1 WW Packet MW
• #1 WW Full Indoor MW
• #1 North America MW
• More than 160 customers worldwide
• Over 100,000 MPR transceivers shipped to date
WORLD LEADERSHIP IN PACKET MICROWAVE ALCATEL-LUCENT 9500 MPR DEPLOYMENTS (2012)
APAC 21 Customers
Europe, MEA 62 Customers
Americas 81 Customers
Source: Dell’Oro 3Q11
Publically announced customer logos
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Data services Mixed services Nodal sites High capacity Ring sites
MSS-4 MSS-8
- Single converged microwave packet transport layer - Single system for all applications: all-outdoor, split-mount, all-indoor & integrated
No IDU
- Complete family of IDU, with highest density in the market - Best space consumption with Zero-Foot-Print and ½ RU
ONE PORTFOLIO SOLUTION
MPT MPT-HL
MSS-1
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Flexible Networking Facilitate transition to higher-capacity, lower TCO MW network architectures using Ethernet or IP/MPLS
One Product Family – All Microwave Applications Minimize sparing & operations costs by using common radios across tail, point-to-point, nodal, full-outdoor and long-haul applications
High-Capacity and High-Availability Address growing bandwidth demand while improving customer Quality of Experience (reduce customer churn)
End-to-end Service-Aware Management Lower OPEX through simplified provisioning, assurance and maintenance
Native Packet Microwave Enable TDM to packet transformation while capitalizing on the benefits of native packet transport
9500 MICROWAVE PACKET RADIO ENABLES THE TRANSFORMATION TO PACKET
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
PACKET MICROWAVE OPTIMIZE FOR A DATA-DRIVEN WORLD
ALCATEL-LUCENT PACKET MICROWAVE
• 16Gbps protected Ethernet switching matrix
• Switch, aggregate and handle any of the possible incoming traffic types with virtually no capacity limits (up to 10 GB/s)
• Fully protected node with NO single point of failure
Address new data services in the most efficient way: Native packet
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
ONE PRODUCT FAMILY – MULTIPLE APPLICATIONS REDUCE SPARING & OPERATIONS COSTS
MSS-1 MSS-4 MSS-8
MPT Indoor and Outdoor Transceivers
Indoor Units
9500 MPR
LONG HAUL NODAL POINT-TO-POINT TAIL
APPLICATIONS
MPT-HL
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MICROWAVE PACKET TRANSPORT (MPT)
COMMON RADIO FOR STANDALONE, SPLIT-MOUNT AND INTEGRATED MICROWAVE
MPT with IDUs Highest nodal capacity in the market (12 directions in 2U) Multi service aggregation (TDM,SONET, Ethernet) Multi service packet ring (ITU-T G.8032v2)
STANDALONE
Zero footprint configurations with 9500 MPR-e Reduces power consumption and amount of EQ needed Optimized for tail applications Alcatel-Lucent is only vendor to offer XPIC on full-outdoor unit
Connect to 7705 SAR to address MPLS converged networks Multiple radio links Ring/meshed topology Fast MW link fault detection
INTEGRATED SPLIT-MOUNT
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MICROWAVE PACKET TRANSPORT (MPT)
HIGH-POWERED TRANSCEIVERS FOR ALL-INDOOR CONFIGURATIONS
ALL-INDOOR • Optimized for long-haul paths • 5.8 GHz to 11 GHz supported • Industry leading rack density • Same shelf for all configurations (1+0, 1+1, 2+0) • GigE connection to MSS shelf
• Supports any mix of indoor and outdoor MPTs
• Terminals, repeaters, hub sites • Less equipment and cabling • Traffic management via one network element
NODAL
MPT-HL
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
HIGH CAPACITY & HIGH AVAILABILITY ADDRESS BANDWIDTH DEMAND, IMPROVE QoE
*R4.0 July 2012 (Target)
ANY AND ALL FEATURES CAN BE COMBINED
10 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
HIGH CAPACITY & HIGH AVAILABILITY ADAPTIVE MODULATION
• Adaptive Modulation exploits available radio bandwidth increasing overall throughput, guaranteeing committed services.
• Benefit from full available bandwidth under normal conditions
• Priority traffic determined by QoS function
• Traffic with high priority, like voice, will always have bandwidth available
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
HITLESS ADAPTIVE MODULATION
- Error free Modulation changes without bit errors, whatever the service: TDM OR Ethernet
- Adaptive Modulation cope not only with rain (flat) fading, but also with complex Selective/Multipath fading
- It is error free with fading speed up to 100 dB/sec (normally fading speed are far below this value)
- PTx of MPT-HC/HL is changed according to selected modulation scheme so maximizing system gain and overall availability
9500 MPR’s ERROR FREE ADAPTIVE MODULATION PROVIDES THE EASIEST WAY TO INCREASE CAPACITY IN CARRIER ETHERNET
NETWORKS
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
HIGH CAPACITY & HIGH AVAILABILITY XPIC: EFFICIENT SPECTRUM USAGE
• Available for all types of services: TDM, Ethernet, SONET
• Available for channel spacing 30, 40, 50 MHz
- 5, 10 MHz in future release
• Available for all the frequency bands covered by MPT-HC (from 5.8 to 38 GHz)
L1 Throughput with header compression [Mbit/s] Cross Polar Interference Cancellation (XPIC)
DOUBLE CAPACITY WITH XPIC; SAVE SPECTRUM AND ANTENNA COST
1 x 50 MHz channel
2 x 500 = 1 Gb/s
H Polarization
V Polarization
RF channels
500Mb/s
500 Mb/s
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MULTISERVICE RING PROTECTION SIMULTANEOUSLY PROTECT TDM AND ETHERNET
One physical ring can simultaneously protect TDM and Ethernet traffic using both directions of the ring.
Traffic in handoff point is double the traffic of a legacy UPSR ring. TDM and Ethernet can be mixed in the ring
30xDS1 + 100 Mb/s VoIP + 167 Mb/s HSDPA 100 Mb/s VoIP + 215 Mb/s HSDPA 30xDS1 + 582 Mbit/sec = 630 Mbit/s
Example: 50MHz/256QAM, 2 x 315 Mbit/sec RF pipe
Ethernet/TDM
Ethernet
Ethernet
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MULTISERVICE RING PROTECTION DOUBLES CAPACITY
If one ring direction fails, all the traffic is re-routed on the remaining direction. If the traffic exceeds the available radio bandwidth, TDM traffic and Ethernet high priority traffic are transmitted and best effort traffic dropped
Traffic CoS ensures high priority traffic is always delivered.
Example: 50MHz/256QAM, 1 x 315 Mbit/sec RF pipe 30xDS1 + 100 Mb/s VoIP + 100 Mb/s VoIP + 67 Mb/s HSDPA 30xDS1 + 267 Mbit/sec = 315 Mbit/s
Ethernet/TDM
Ethernet
Ethernet
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
HIGH CAPACITY & HIGH AVAILABILITY RADIO LINK AGGREGATION (LAG)
In this example, user traffic is split-up into radio channels. Advantages are:
1. Throughput. The overall radio Ethernet throughput is more than 900Mb/s ( 3x 300 Mbit/s, being this the value for 256QAM@50 MHz)
2. Protection. In case of a failure of one of the three channels, all the traffic is redirected on the remaining two links (with a throughput of around 600 Mb/sec). The discarded or dropped traffic is the one with lower priority: high priority traffic is still running on the remaining active channels
Traffic Link Aggregation can be applied to radio ports – AKA “Radio LAG”
Ch1 Ch2 Ch3
User traffic
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Ethernet Network Ethernet Network
T1/D
S3
Ethernet Ethernet
T1/D
S3
Packet Traffic
TDM Traffic Enters Node A and Exits Node B as Ethernet
9500MPR A
9500MPR B
TDM Traffic Enters Node A and Exits Node B as TDM
TDM Traffic Enters Node A and Exits Node A as Ethernet Ethernet Traffic Enters Node A and Exits Node B as Ethernet Ethernet Traffic could be native Ethernet or TDM encapsulated Into Ethernet frames
Service Flow Options
17 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Compact, Modular Chassis:
• MSS8: 2RU high, 19” width and 10” (300mm) depth, 8 flexible slots
• MSS4: 1RU high, 19” width and 10” (300mm) depth, 4 flexible slots
• 2 control module slots, 6 (or 2) half-wide I/O slots
• Two feeds: -48/-60V DC, or optional integrated +24V DC/DC
• Up to 24 radio directions for MSS8 and up to 12 radio directions for MSS4
• High service reliability: - Fully protected, no single point of failure
- Redundant core/switch modules
- Redundant access cards
- Distributed architecture for DC/DC converter (each card has its own DC/DC converter)
• -40C to +65C operating temperature range
MSS-8 and MSS-4
18 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Derived from MSS4/8 and with the same level of feature set, it is a ½ U pizza box, 16DS1 + 6 Gbit/s interfaces
• Full Interoperability with MSS4/8 since software is common
• Not only last mile, but even “small” nodes, with management of up to 6 MPT-HC (MPT-HL in Future Release)
MSS-1
19 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Fan-less Design, Temperature hardened -40 °C to +65 °C
• 1+0, 1+1 radio protection, support of up to 6 MPTs
• Multiservice Ring protection 8032 v2 support for access rings
• 2 PFoE interfaces available for MPT-HC powering
• 2+0 LAG L1: supported (HW ready)
• Housekeeping IN/OUT management
MSS-1 FEATURE LIST
20 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Control and Switching Module (CSM or CORE)
• Control module integrated with Ethernet switch based fabric providing 16 Gbit/sec matrix
• 1+1 hot redundant switch fabric protection
• 1+1 CPU and controller protection
• 1+1 synchronization input and output ports
• Jumbo frame support
• Compliancy: - 802.1p/Q VLAN tagging 802.3 10BaseT
- 802.3u 100BaseTX 802.3x Flow Control
- 802.3z 1000BaseSX/LX 802.1d Bridging
- 802.1ad link aggregation 802.3ag Ethernet OAM
- 802.3ab 1000BaseT 802.3ah (future)
- MEF 9 Y. 1731 (future)
- MEF 14 G. 8261/8262/8264 synchE
• Interfaces
- 4 x 10/100/1000 Base – T Ethernet data port (one user configurable for TMN) with synchronous Ethernet support
- 2 x SFP Optical GETH (SX or LX SFP) with synchronous Ethernet support
- 1 x 10/100 Base-T LAN for 9500 MPR Craft Terminal or NMS
- 1 x Sync CK input via 1.0-2.3 coaxial connector (2, 5 or 10 MHz)
- 1 x Sync CK output via 1.0-2.3 coaxial (2, 5 or 10 MHz)
21 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Support up to two MPT ( 1+0, 2+0 or 1+1 protection)
• 2 x 10/100/1000 Base – T Port for electrical data to/from MPT and Power feed over Ethernet
• 2 x SFP Optical GE for optical data connectivity to/from MPT (SFP SX)
• Double 50Ω QMA Connectors as an option for MPT Power feeding in case of optical connectivity
• Integrated lightening protection (compliant to ITU-T K44/K20)
MPT access card
22 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
TDM Access Modules
2xDS3 Access Module • Characteristics
- 1 or 2 DS3
- MEF-8 SAToP Circuit Emulation
- Differential and adaptive clock-recovery
• Interfaces
- 2 Mini-BNC Connectors
• System
- Up to 6 units per shelf (12 DS3)
- 1+1 EPS protection
32xDS1/E1 Access Modules • Characteristics
- 1 to 32 DS1
- MEF-8 SAToP Circuit Emulation
- Differential and adaptive clock-recovery
• Interfaces
- 32 DS1 ANSI T1.102 – SCSI Connectors
• System
- Up to 6 units per shelf (192 DS1)
- 1+1 EPS protection
23 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Additional Ethernet user interfaces • 4x 10/100/1000 BaseT
• 4 x SFP Optical Gethernet interfaces (LX and SX SFP)
• Embedded L2 Ethernet switch
• Jumbo frame support
EAS (Ethernet Access Switch) card
Additional MPT interfaces • Up to 4 MPT support with optical
connectivity
• Multichannel LAG L1 for 2+0/3+0/4+0 configurations
• Up to 24 MPTs supported in a single MSS8
24 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• SONET access card supports two different applications (only SW change, same HW)
• Transparent transport of up to 2xOC3 over the radio (with mixed DS1/DS3/Ethernet traffic transmission)
• DS1 Multiplexing (Future Software Release, No hardware change)
• Line configurations:
• Un-protected 1xOC3 / 2xOC3
• Protected 1+1 EPS
• 2 x Optical or Electrical OC3 interfaces
SONET card
25 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Optional Modules
Auxiliary Module • One Auxiliary card per NE can be
equipped in fixed position: - Slot 8 of MSS-8 or in slot 4 of MSS-4
• Housekeeping connector - 13 Housekeeping Contacts Closures.
- 6 Input and 7 Output.
- Connector Sub-D 15 female
Fan Alarm Module • Optional Fan Card in Place of standard Fan card
• Provides Alarm Outputs Contacts
- Summary Alarm
- Major Alarm
- Minor Alarm
• A/B Battery Status LED
• Fan Status LED
• Future Support of Alarm Input Contacts
• Fan Alarm connector
- Connector Sub-D 15 female
- 25’ and 50’ Cables Available
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Microwave Packet Transport – Long Haul MPT-HL and MPT-HL Shelf Supported Features
• 5.8GHz – L6GHz
• U6GHz & UU6Ghz
• 7/8 GHz
• 10.5 GHz
• 11 GHZ
• Adaptive Modulation support up to 256QAM
• Up to +34 dBm software controlled
• Slip fit backplane connector - Eliminates customer adjusted RF cables
• GigE connection to the MSS shelf
System
• Up to 2 units per shelf
• Up to 6 shelves per system
• 1+0, 1+1, 2+0 configuration
27 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Frequency Band 5.8 to 38 GHz
• Modulation 4 to 256 QAM
• Channel Spacing 5 to 50 MHz
• Payload Capacity Up to 350 Mbs
• Ethernet Throughput Up to 1 Gbit/sec (*)
• XPIC support
• Extended temperature range : -40° to +65°
Interfaces
• 1000 BaseT with Power Feed over Ethernet (up to 100m)
• Optical Gigabit Ethernet (above 100m)
(*) 1 Gbit/sec reached using Packet Throughput Booster with IPv&6 64 bytes packets
Gigabit Ethernet • Electrical with Power Feed over Ethernet (CAT5e)
• Optical with Power feed over separate Coax
MPT-HC
28 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MPT XP Radio Transceiver • Frequency Band 6GHz (3Q) 7 & 8GHz (4Q)
• Modulation 4 to 256 QAM
• Channel Spacing 3.5 to 56 MHz
• Payload Capacity Up to 350 Mbs
• Ethernet Throughput Up to 1 Gbit/sec (*)
• XPIC support
• Same radio (RF, modem and SW) as MPT-HC, but with additional 7-8 dBm of PTx
(*) 1 Gbit/sec reached using Packet Throughput Booster with IPv&6 64 bytes packets
MPT-XP (Extended power)
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MPT-HC/XP Mechanical Features
RJ-45 (Data + PFoE)
XPIC Port
1+1 RPS Port (Optional)
Optical Port
Optional XPIC & RPS module Blank module shipped by default
Antenna Alignment Initial Config Port
30 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
• Supports MPRe PFoE Feature
• Supplies up to 2 MPRe RF Transceivers
MPR-e Connectivity Dual Power Injector Box and module
A & B Redundant Power Inputs
CAT5e GigE IN CAT5e GigE +
-48VDC OUT
2 MPRe Supported
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
MPT-HC Connectivity to MSS-1/4/8
Ethernet CAT5e
Data + PoE fiber
coaxial cable
Up to 100m Up to 450m
MSS-8
MSS-4
32 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
ALU 7705 SAR Microwave Solution • Direct connectivity of 7705 SAR to 9500 MPR-e (full outdoor packet radio)
• Unparalleled high availability IP/MPLS networking solution
- Flexible L1, L2 and L3 services with rich OAM capabilities
- High performance network synchronization over Microwave
- Single vendor relationship: Simplified project management, supply chain, services, field support, …
• Unsurpassed MW link density:
- 24 MW links plus another 24 GigE links with control redundancy in 2 RU (SAR-8)
• Consolidate End-to-End Element, Network and Service Management across IP and Microwave domains
- Single network element for SAR and MPR-e
- Leveraging 5620 SAM for point & click E2E service provisioning and OAM
7705 SAR-8/18 7705 SAR-8/18
9500 MPR-e 9500 MPR-e
5620 SAM
33 COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
Packet Microwave Card (PMC) General Description
• 4 Tri-speed Microwave Ports: Key to enable microwave awareness - 2 x on-board RJ45: Copper sync Eth capable - 2 x SFP: Supports both optical and copper SFP - Support
- Up to 4 x MPR-e with copper connection - Up to 2 x MPR-e with fiber connection
- Support full feature set for IP/MPLS/Eth networking
4 Tri-speed SFP port: for regular IP/MPLS/Eth networking
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
FLEXIBLE NETWORKING ENABLE MORE SCALABLE, COST-EFFECTIVE ARCHITECTURES
Tree• Standard microwave
topology• Deployed everywhere
Tree• Standard microwave
topology• Deployed everywhere
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION
SERVICE-AWARE MANAGEMENT REDUCE OPEX WITH END-TO_END SERVICE MANAGEMENT
RAPID PROVISIONING • Easy-to-use, customizable GUI
• Minimize operator errors with templates and scripts • Automate multivendor provisioning through OSS
OPERATIONAL FIT AND FLEXIBILITY
• Minimize system-integration cost/effort • Open interfaces, certified OSS integration options • Custom service portals • Modular and scalable
RELIABLE ASSURANCE
• Prevent issues before customers are affected • Quickly identify and resolve problems once they occur • Enable enhanced SLA and performance monitoring
COPYRIGHT © 2012 ALCATEL-LUCENT. ALL RIGHTS RESERVED. ALCATEL-LUCENT — INTERNAL PROPRIETARY — USE PURSUANT TO COMPANY INSTRUCTION