ALLVENT VENTILATION PRODUCTS PRODUCT CATALOGUE · 4 INFO HOTLINE 1300 883 544 The excellent design of the MiniVent®, M1 blends in beautifully everywhere, even in the most demanding

1www.allvent.com.au

PRODUCT CATALOGUEALLVENT VENTILATION PRODUCTS

EDITION 14

2 INFO HOTLINE 1300 883 544

While every effort has been made to accurately present specifications and data in this catalogue, Allvent P/L accepts no liability for losses arising from errors or omissions contained herein. As a result of continuous product development all data and specifications are subject to change without notice.

RESIDENTIAL VENTILATION

WALL / CEILING FANS M1 Series 4

HV/HVR Series 6

Slim Series 7

WINDOW AND WALL FANS Vario Series 8

EXTERNAL WALL MOUNTED CENTRIFUGAL FANS CA WE D Series 9

DUCTED CEILING EXTRACTION FANS XC Series 10

NVF Series 11

AXIAL FANS A Series 12

Cabinet Fans 13

IN-LINE MIXED FLOW FANS Lineo Series 14

IN-LINE CENTRIFUGAL FANS CA MD Series 16

SUB FLOOR VENTILATION SF Series 17

MECHANICAL VENTILATION WITH HEAT RECOVERY

HVR Series 18

VENTILATION KITS

20

ACCESSORIES STAINLESS STEEL GRILLES

22

INTERNAL CEILING GRILLES

23

EXTERNAL WALL GRILLES

24

Product Index

3www.allvent.com.au

ACCESSORIEScontinued FITTINGS

26

FLEXIBLE DUCT / DAMPERS

27

CONTROLLERS

28

COMMERCIAL & INDUSTRIAL VENTILATION

CAR PARK JET FANS IDV-HC Series 32

IVRD Series 33

IVAD Series 34

PLATE AXIAL FANS HQ and HW Series 36

GIGABOX CENTRIFUGAL FAN GB.. 38

KITCHEN EXHAUST FANS KMV Series 42

ROOF MOUNT EXHAUST FANS RCV/RCD Series 43

ROOF MOUNT EXTRACTION OR SUPPLY KITS SECD Series 44

INDUSTRIAL FANSPedestal, Wall and

Portable Floor 45

AIR CURTAINS Air Curtains 46

HEAT RESIDENTIAL HEAT TRANSFER Heat Transfer Kits 50

INFRARED WALL HEATERS Thermologika 52

Thermologika

Soleil Plus 53

WALL MOUNTED FAN HEATERS Microrapid Heater 54

HYGIENE DOLPHIN HAND DRYERS

56


The excellent design of the MiniVent®, M1 blends in beautifully everywhere, even in the most demanding room designs. The compact and attractively designed fascia completely shields the view of the fan interior.

Technical DataModel Dia 0 V Hz W m3/hr L/sec dBA@3m

M1/100 98 240 50 9 90 25 30

M1/120 118 240 50 13 195 54 36

M1/150 145 240 50 10 310 86 39

Dimensions

Applications for UseSuitable for all ventilation applications in bathrooms, toilets and all wet areas.

Energy Saving Features (optional)

Built-in Run-on Timer (N)

Built-in Humidity Sensor (F)

Built-in Presence Sensor (P)

A B C D E

M1/100 147 35 52 96 980

M1/120 176 39 70 116 1180

M1/150 210 48 76 142 1450

M1 SeriesQUIET, ATTRACTIVE AND EFFICIENT

THE NEW MINIVENT® FAMILY

Features• IPRating45

• Compactdesignedfasciaremainscleanandattractive

• Highefficiencyimpeller

• Backdraftshutterasstandard

• Twospeed

• Energyefficient–5wattsat75m3/h and 10 watts at 280m3/h

Performance Curves

5www.allvent.com.au

Quiet. Energy-efficient.

Powerful and quiet.

No compromises are made with MiniVent® M1 in terms of power and noise level. The ultraSilence® technology developed by Helios ensures optimum quietness and lowest noise emission at all levels.

When introducing the M1/100, Helios suceeded in setting the newmarketstandardwithjust25dB(A)at75m3/h. The M1/150 isnowfurtheringthissuccesswithjust35dB(A)at280m3/h.

Up to 70% energy savings.

If power consumption is analysed in relation to flow rate, it is clear at a glance that M1 from Helios scores well. For this reason, MiniVent® has been awarded the ‘greenTec-Label’ for, particularly, energy saving solutions.

Furthermore,thenewM1/150isequippedwithhighlyefficientEC motor technology which, with regard to speed control, leads to a saving of up to 70% in comparison to conventional AC technology.

TheM1/150isthemostenergyefficient150mmwallfanonthemarket!

• Upto70%moreefficientthananyother150mmwallfan• Only10wattsonhighspeed

Removeable Backdraft

Ball bearing mounted, maintenance-free, energy-saving motor

IP45 rating for installation in zone 1 of bathrooms

Removeable guide vanes

Elegant, closed and easy-care fascia


Features• HV200andHV250reversible(supplyandexhaust)

• Highairflowandlownoisethroughlowresistance

• Totallyenclosed,powerfulmotorwithhighefficiency

• Quietcontinuousoperationatanyangle

• 40,000runninghours

• Speedcontrollablebyspeedcontroller(accessory)

Technical DataModel Dia 0 V Hz W m3/hr L/sec dBA IP Rating

HR90K 97mm 240 50 14 95 27 42 45

HR90K 12V 97mm 12 50 18 95 27 42 44

HVR150 145mm 240 50 30 260 73 46 44

HV200 207mm 240 50 30 450 125 52 54

HV250 250mm 240 50 40 840 234 55 54

Performance Curves

Dimensions

The timeless design blends well in any stylish room. Designed to ventilate living anddiningrooms,officesandconferencerooms, restaurants or foyers.

HV/HVR SeriesPOWERFULEXTRACTION

WALL / CEILING FANS

ModelsHR90K

∆HRV150◊HV200 *HV250

7www.allvent.com.au

Features• 14mmslimlinegrille

• Easyinstallation

• Backdraftshutter

• Run-ontimeroptional

• Othercontrolsavailable

The SLIM Series can be wall or ceiling mounted. SLIM’s can beusedinbathrooms,toilets,kitchensorutilityroomsindomestic or commercial applications.

Technical DataModel Dia 0 V Hz W m3/hr L/sec [email protected]

SLIM4C 100mm/4” 240 50 14 90 25 39

SLIM5C 125mm/5” 240 50 18 140 38 42

SLIM6C 150mm/6” 240 50 29 250 70 46

Performance Curves

Dimensions

A B C D E F G H

SLIM4C 158 158 14 98 94 6 140 140

SLIM5C 178 178 14 118 100 6 160 160

SLIM6C 205 205 14 148 110 6 187 187

SLIM SeriesECONOMICAL

WALL / CEILING FANS


Vario exhaust/supply fans provide flexible solutions to improve the quality of air we breathe in any domestic or commercial environment.

Technical DataModel V Hz W m3/hr L/sec dBA@3m

150/6”AR 220-240 50 25 235 65.3 37.5

230/9”AR 220-240 50 26 480 133 35.6

300/12”AR 220-240 50 45 1050 292 40.2

AccessoriesModel Description

KITMU wallmountingkitwithrods

VARWT optional wall tube available

Applications for Use• dwellings

• café’sandshops

• sportscentresandgyms

• restaurants

Dimensions

A B C D Emin/max

0 Hole cut-out

150/6” 215 218 31 97.5 2/38 185-190

230/9” 294 297 31 130 2/38 257-262

300/12” 390 393 31 147 2/38 324-329

VARIOSeriesQUIET,FLEXIBLEANDREVERSIBLE

WINDOWANDWALLFANS

Features • Highlyefficientimpellers:bestintheircategoryfor

performance and low energy consumption

• Lownoiselevels

• Casingmadefromshock-resistantUVstabilisedABS

• IPX4rating

• Pullcordoption

• Automaticshutters

• Allmodelsreversible(supplyandexhaust)

Performance CurvesPlease refer to the main catalogue

High FlexibilityVortice Vario fans are designed to provide high flexibility and a wide choice of applications in order to satisfy even the most demanding requirements.• publichouses

• offices

• schools

• communityhallsandmanymore

9www.allvent.com.au

CA WE D SeriesSILENTEXTRACTION

The CA WE D is the ideal solution where centralised extraction isrequiredformorethanoneroomeg:kitchens,bathrooms,storage areas, cellars; public spaces such as bars and shops; workspacesincludingworkshopsandlaboratories.

Technical DataModel V Hz W m3/hr L/sec dBA@3m IP

CA100 WE D 240 50 60–80 200–330 56–92 38.3–50.1 IPX5

CA125 WE D 240 50 60–80 215–380 60–106 36.3–49.5 IPX5

CA150 WE D 240 50 110–155 545–750 151–208 43.2–51.4 IPX5

CA200 WE D 240 50 110–155 570–785 158–218 43.4–51.3 IPX5


Dimensions

Applications for Use

Features• Centrifugalduct-mountedextractorsforexternal

installation thereby reducing noise

• Automaticclosefuntionpreventsairreturningtotheroom

• Steelhousingwithpolyesterpaintlonglife

• Twospeed

EXTERNALWALLMOUNTEDCENTRIFUGALFANS

A B C D E F

CA 100 WE D 262 345 127 113 970 20

CA 125 WE D 262 345 127 113 970 20

CA 150 WE D 360 430 173 155 1470 20

CA 200 WE D 360 430 173 155 1970 20

10 INFO HOTLINE 1300 883 544

XCSeriesLOWPROFILE

DUCTEDCEILINGEXTRACTION

A B C D E F G H I

XC13E 270 270 156 14 100 242 264 228 242

XC15E 326 326 169 14 100 144 320 276 300

TheXCseriesisalowprofileceilingmountedexhaust fan suitable for tight ceiling spaces in domestic and commercial applications.


XC13E 100 240 50 28 180 50 32

XC15E 100 240 50 34 280 77 39

Dimensions

Features• Installationceilingdepth142mmforXC13E

• Builtinbackdraftdamper

• Powercableandplugsupplied

Performance Curves

11www.allvent.com.au

NVF SeriesMODERNFASCIA

DUCTEDCEILINGEXTRACTION

The NVF series is a modern styled ceiling mounted fan suitable for domestic and residential high-rise applications. Hi-static duct characteristics.

Technical DataModel Dia 0 V Hz W m3/hr L/sec [email protected]

NVF13 100 240 50 26 180 50 39

NVF15 125/150 240 50 30 270 75 46

Performance Curves

Dimensions

Features• Modernfasciadesign

• Built-inbackdraftdamper

• 100mm,125mmor150mmductconnections

• Quietoperation

• Powercableandplugsupplied

A B C D E F G H

NVF 13 295 295 220 25 98 130 270 200

NVF 15 320 320 205 25 125 150 310 270

12 INFO HOTLINE 1300 883 544

AXIALIN-LINEFANS

A SeriesRELIABLE,HARDWORKING

A B C D E F G H I J

A40 120 121 123 990 40 87 24 120 72 5.50

A60 173 181 157 1460 51 103 25 165 77 6.50

A80 225 235 165 1990 51 122 30 200 92 70

A100 250 270 220 2300 65 155 30 255 125 70

The A series axial fans are housed in a quality metal casing. Reliable fans for bathroom and laundry applications with air flows against low resistances.

Technical DataModel Dia 0 V Hz W Phase 0 RPM L/sec m3/hr dBA

A40 100 240 50 18 1 2P 38 137 18

A60 150 240 50 35 1 2P 91 328 49

A80 200 240 50 46 1 2P 135 486 55

A100 250 240 50 31 1 4P 230 828 52

Performance Curves

Dimensions

Features• Metalconstruction

• Mountingbracketsforeasyinstallation

• Longtermreliableoperation

• Standardwith240vthreepinplug


Features• Madeofaluminiumcasing

• Over40,000runninghours

• Highquality,provenreliability

• Ballbearing

• Basketguardsavailable

DimensionsTechnical DataModel Dia Ø V Hz W m3/hr dBA

UF-80A23B-H 80x80x38 240 50 14 51 32

UF-92A23B-H 92x92x38 240 50 16 78 34

UF-16FC23B-H 160x160x62 240 50 46 450 52

UF-18JC23B-H 180x180x90 240 50 75 781 54

A B C D E F G

UF-80A23B-H 38 4 80 71.5 4.3 300 76

UF-92A23B-H 38 4 92 82 4.3 300 88

UF-16FC23B-H 62 4 189 138.5 5.5 - 142

UF-18JC23B-H 90 6 209 152.7 5.5 - 160

Cabinet FansCOMPACT

SMALLAXIALFANS

This range of small axial fans are ideal for use in compact cabinets and space-limited areas where constant, cooling airflow is required.

14 INFO HOTLINE 1300 883 544

LINEOSeriesLONGLIFE

IN-LINEMIXEDFLOWEXTRACTORFANS

A B C D E F G

100V0 96 303 211 90 188 101 189

125V0 122 258 211 90 188 101 189

150V0 146 294 234 110 214 112 212

200V0 196 300 260 140 234 125 235

250V0 247 385 317 176 300 152 292

315V0 312 448 392 220 361 188 359

The Lineo mixed flow in-line fans have a very small overallsize,makingthemidealforinstallationincramped areas.

Technical DataModel Dia Ø V W

min/maxFLA

min/maxdBA@3mmin/max

l/smin/max

m3/hmin/max

100V0 100 240 20/23 0.09/0.11 30.7/39.4 50/70.8 180/255

125V0 125 240 25/33 0.11/0.15 33.9/43 69.4/101.4 250/365

150V0 150 240 40/58 0.18/0.26 41.4/50.5 106.9/152.8 385/550

200QV0 200 240 45/75 0.22/0.37 39.6/49 194.4/263.9 700/950

200V0 250 240 98/145 0.43/0.64 46.2/52.5 219.4/294.4 790/1060

250QV0 250 240 85/110 0.40/0.50 49.1/56.2 200/275 720/990

250V0 250 240 110/180 0.48/0.78 51.4/59.1 275/375 990/1350

315V0 315 240 200/300 0.90/1.32 50.6/63.4 483.3/638.9 1740/2300

* Timer models available

Features• Twospeeds

• SelfextinguishingV0plastic

• IP44splashproofprotectiononallmodels

• Timermodelsareadjustablefrom3to20minutes

• LongLifeballbearingmotorscontinuous,troublefree operation

• Quickandeasyinstallation

• Simplemaintenance

• Lowsoundemission

Dimensions



Limitless Applications

Officespaces Bathrooms and showers Toilets and laundries

Installation made easy Large capacity terminal box for easy wiring IP44

The perfect solution for limited space

Impact resistant polymer, self extinguishing (VO)

Maintenance and cleaning?

Open the clips and pull out the fan unit

16 INFO HOTLINE 1300 883 544

CA MD SeriesMETALCONSTRUCTION

CENTRIFUGAL IN-LINE FANS

For medium to smaller air flow volumes against high resistances. Universal application for domestic, commercial and industrial purposes.

Features• Twospeeds

• Polyesterpowder-coatedmetalforanyweathercondition

• Mountingbracketsforeasyinstallation

• Turbinefanonball-bearingmountedmotor

• Canbemountedinanyposition

• ProtectionratingIP44

Dimensions


A B C 0D 0E F

CA100MD 15 239 295 97 255 15

CA125MD 23 239 195 122 255 23

CA150MD Q 30 239 295 147 255 30

CA150MD 17 275 392 147 347 17

CA160MD 18 275 392 157 347 18

CA200MD 17 275 302 197 347 20

CA250MD 35 275 392 247 347 38

CA315MD 30 306 455 312 406 36


CA100MD 100 240 50 85 340 94 43

CA125MD 122 240 50 85 450 125 45

CA150MD 177 240 50 85 550 153 53

CA200MD 197 240 50 90 830 231 46

CA250MD 247 240 50 120 1080 300 52

CA315MD 315 240 50 120 1080 300 52


SFS9724

SFS9724

SFE9724

SFE9724

WPL15

WPL15

SFE9724

SFE9724

• Standard grille (WPL15) allow natural flow inlet air

• Exhaust fan (SFE9724) extract air from building space

Technical DataModel Flow Cut-out

Size

V Hz W m3hr L/s dBA

@3m

SFE9712 Exhaust Fan 225 x 157 12 50 13 328 91 45

SFE9724 Exhaust Fan 225 x 157 240 50 35 328 91 45

SFS9712 Supply Fan 225 x 157 12 50 13 328 91 45

SFS9724 Supply Fan 225 x 157 240 50 35 328 91 45

Dimensions

Features• Availablein240Vand12V

• Threepinplug(240Vonly)

• Quietoperation

• 12Monthwarranty

• Optionaltransformeravailable

SF SeriesUNDERFLOORVENTILATIONSYSTEM

SUB-FLOORVENTILATION

These underfloor fans are designed for sub-floor ventilation. Available as a supply / exhaust fan, made to order. Ideal for high moisture areas.

• Supply fan (SFS9724) introduce outside air

• Exhaust fan (SFE9724) extract air from building space

• Creates better cross-flow and removes air from complete building space (no ‘dead’ spots)

SFS9724

SFS9724

SFE9724

SFE9724

WPL15

WPL15

SFE9724

SFE9724

18 INFO HOTLINE 1300 883 544

HRV SeriesWHOLEHOUSEVENTILATIONUNIT

MECHANICALVENTILATIONWITHHEATRECOVERY

TitonHRVSeriesisasmall,highlyefficientventilationunit easily incorporated into small houses or apartments where space is at a premium.

A centrally located continuously running mechanical supply and extract fan extracts air via ducts from moisture producing areasor‘wetrooms’suchaskitchensandbathroomstoremoveodours and excessive humidity. The air is passed over the heat exchanger, which transfers a high proportion of the heat of the extract air to the incoming air, which is then distributed to the habitable rooms via ducts.

Whole building ventilation is maintained by a contrast flow of air between input and extract points. A boost facility provides rapid extraction when necessary to remove higher levels of pollutants and humidity. As an alternative, every room may have an individual unit as opposed to a centrally located and ducted unit.

HRV Q PlusHighly Efficient Heat Recovery Ventilation UnitsThe revolutionary ultra-compact HRV Q Plus continuously running whole house ventilation unit with heat recovery is independently tested to the highest standards. The HRV Q Plus hasbeenspecificallydesignedtogiveimprovedperformanceover older models without increasing the overall size of the unit.

The combination of ultra low power consumption and a highly efficientheatexchangerisspecificallydesignedtoenhanceSAP performance via Appendix Q, yet the unit remains small enough too be easily incorporated into apartments and smaller houses where space it at a premium. The HRV Q Plus Mechanical Ventilation with Heat Recovery unit has many new featuresincludingremovableairtightfiltercoversforeasyaccesstofiltermaintenance.


FeatureandBenefits• Verycompactunitcanbefittedinairingcupboards,small

service cupboards or loft spaces.

• Lowestpowerconsumption/specificfanpoweronTitoncompact units

• Highlyefficientheatexchanger;upto91%

• StandardversionhasaSummermodetohelpreducedwelling overheating

• Intelligentcontroller,quickandeasycommission

• Fullyadjustableboostoverruntimer0–60minutes;canbeused with non-latching (momentary) switches to prevent unit from being accidently left in boost mode.

• Intelligentfrostprotectionsteppedreductionofsupplyairrates prevents freezing

• Setbacksettingtoreduceventilationwherelocalregulations allow

• Verylightweightforeasyhandling

• Demandcontrolventilationready

• Voltfreeswitchingcontrol

• Removablefiltermaintenance

• G3filtersasstandard,G4asanoption

• Reusableplasticfilterframes

• Quickfixviamountingbracket

• Patentedfeatures

Model Nominal Fan Performance l/s

HRV 1.25 Q Plus 60 @ 50 Pa

HRV 1.5 Q Plus 70 @ 50 Pa

HRV 1.75 Q Plus 80 @ 80 Pa

HRV 2 Q Plus 80 @ 150 Pa

HRV 2.75 Q Plus 100 @ 100 Pa

HRV 3 Q Plus 120 @ 150 Pa

20 INFO HOTLINE 1300 883 544

ALVNVF13 Kit• 1xNVF13

• 1x100mmdiameterx3mlengthduct

• 1x100mmfixedorgravitygrille

ALVA60 Kit• 1xA60in-linefan


• 2x150mmfixedgrilles

ALVDF150 Kit• 1xDF150in-linefan


• 2x150mmfixedgrilles

ALVDF150 Air Transfer Kit• 1xDF150Pin-linefan

• 1x150mmdiameterx6mlengthinsulatedduct

• 3x150mmadjustablegrilles

• Insulatedduct/Nudecoreoption

Ventilating to the outside prevents condensation damage to roof areas. Transfer hot or cool air from air conditioners and heaters in one room to one or more other rooms.

Kits designed to suit your needs also available.

Air Transfer KitsCOMPLETEPACKAGEINONEBOX

KITSTOSUITALLAPPLICATIONS

SLIM6 Kit• 1xSLIM6


• 1x150mmfixedorgravitygrille


Accessories

22 INFO HOTLINE 1300 883 544

Hood GrillesThe hood grille is ideal for harsh weather areas and regions that experience heavy rainfall.

Model Size A B C

HG100 100mm 100 137 52

HG125 125mm 125 167 52

HG150 150mm 150 167 62

Eave GrillesThe round, flush grille is ideal for under-eave venting. Can be used as an inlet or outlet vent.

Model Size A B C D

EG100 100mm 100 155 50 6

EG125 125mm 125 185 50 6

EG150 150mm 150 210 60 6

EG200 200mm 200 265 70 6

Dome GrillesThedomestylegrilleisanalternativefixedlouvre. The wall grille has an added protection with the round hooded section. May also be used as an inlet.

Model Size A B C D

DG100 100mm 100 150 50 10

DG125 125mm 125 185 50 10

DG150 150mm 150 210 60 10

Gravity GrillesThe gravity louvered grille is designed to allow air to be vented to the atmosphere while protecting against backdraftandverminentry.

Model Size A B C D E

GG100 100mm 100 155 50 17 155

GG125 125mm 125 180 50 23 180

GG150 150mm 150 180 60 23 180

GG200 200mm 200 265 75 23 265

WALL/EAVESTAINLESSSTEELGRILLES–304GRADE

EMBER-PROOF

MESH FITTED

IN BACK


Jet Centre GrillesThisrangeofdownjetceilingdiffusersevenlydisperses air to a chosen area. Simple to install, it comes with springloadedattachmentarmsthatlockandsecure the vent in place.

Model Size A B C D

Euro 4WR 100mm 98 143 17 57

Euro 6WR 150mm 150 235 5 95

Euro 8WR 200mm 200 255 5 105

Euro 10WR 250mm 250 330 5 120

Egg Crate GrillesThe square-faced egg crate grille is commonly used forairintake.Metalconstruction.

Model Size Neck A B C D

ERG151515 150 x 150mm 150mm 150 120 200 155

ERG202015 200 x 200mm 150mm 150 125 250 210

ERG202020 200 x 200mm 200mm 200 125 250 210

Cone GrillesCommonlyusedforairintake,thedesignoftheseceilingdiffusersacceptairfromsurroundingsurfacesandnotdirectlybelow.Idealforheat,smokeandvapourextraction/transfer.Simpleairflowcontrol–screwtheinvertedconecentre.

Model Size A B C D

Euro 4WRC 100mm 98 147 17 57

Euro 6WRC 150mm 147 265 15 90

Euro 8WRC 200mm 200 320 15 90

Euro 10WRC 250mm 250 400 15 100

Euro12WRC 300mm 300 440 20 100

Stainless Steel Cone GrillesCommonlyusedforairintake,thedesignoftheseceilingdiffusersacceptairfromsurroundingsurfacesandnotdirectlybelow.Idealforheat,smokeandvapourextraction/transfer.Simpleairflowcontrol–screwtheinvertedconecentre.

Model Size A B C

CG 100 100mm 97 118 52

CG 125 125mm 120 141 52

CG 150 150mm 145 162 62

CG 200 200mm 195 214 73

INTERNAL CEILING GRILLES

24 INFO HOTLINE 1300 883 544

GravityGrille:EuroWGSThe gravity louvered vent is designed to allow air to be vented to the atmosphere while stopping outside air and pests entering the system when not in use.

FixedGrille:EuroWGThefixedgrillemaybeusedasanoutletorafreshairintakevent.Usedasawall,ceiling or under-eave vent.

Model Size Style A B C D

Euro 4WG 100mm Fixed 125 54 125 71

Euro 5WG 125mm Fixed 150 54 150 71

Euro 6WG 150mm Fixed 175 54 150 71

Euro 8WG 200mm Fixed 284 68 196 90

EXTERNALWALLGRILLES:PLASTIC

Model Size Style A B C D

Euro 4WGS 100mm Gravity 125 54 125 71



PlasticEggcrateGrille:PEGThe eggcrate grille may be used as an outletorafreshairintakevent.Usedasa wall or ceiling vent.

Model Size A B C D E

ERG151515 125 x 125mm 100 71 125 125 17

ERG202015 150 x 150mm 125 71 150 150 17

ERG202020 175 x 175mm 150 71 175 175 17

INSECT MESH

FITTED AS

STANDARD

INTERNALWALL/CEILINGGRILLE:PLASTIC


WeatherProofGrille:WPLAluminium louvered grille for external weather proof applications. Box adaptor with duct connection.

Model Duct Size Face Size Neck Size

WPL 150 280 x 212mm 225 x 157mm

WPL15 150 200 x 200mm 145 x 145mm

WPL20 200 250 x 250mm 195 x 195mm

WPL25 250 300 x 300mm 245 x 245mm

WPL30 300 350 x 350mm 295 x 295mm

Othersizesavailableonrequest.

CircularGrille:RWLAluminium, powder-coated grille for external, weather-proof applications.

Model Duct Size Face Diameter

RWL150 150 200

RWL200 200 250

RWL250 250 300

RWL300 300 350

RWL350 350 400

RWL400 400 450

EXTERNALWALLGRILLES:ALUMINIUM

26 INFO HOTLINE 1300 883 544

ReducersPoly Fitting • HeavyDuty

• HighDensityPolyethylene

• PositiveLockDuctTabs

Model Size

ALVRED10–12 100–125mm

ALVRED10–15 100–150mm

ALVRED15–20 150–200mm

ALVRED20–25 200–250mm

ALVRED25–30 250–300mm

ALVRED30–35 300–350mm

Y FittingPoly Fitting • UVStabilised

• Robust

• SmoothInternalLines

Model Size

ALVY10 100mm

ALVY12 125mm

ALVY15 150mm

ALVY20 200mm

ALVY25 250mm

ALVY30 300mm

DoubleBTOPoly Fitting • UVStabilised

• Robust


Model Description (mm)

ALVDBTO8666 200x150x150x1504-wayjunctionpoly

ALVDBTO10888 250x200x200x2004-wayjunctionpoly

Reducer Y FittingPoly Fitting • UVStabilised

• Robust


Model Description (mm)

ALVY644 150x100x100

ALVY866 200x150x150

ALVY1088 250x200x200

ALVY121010 300x250x250

MADETOORDERavailable

FITTINGS


Insulated FlexGeneral purpose ducting

• Silver/Blackinnercore• FireRatedAS4254

Model Size mm/m

ALVINS6150 150mm/6m

ALVINS6200 200mm/6m

ALVINS6250 250mm/6m

ALVINS6300 300mm/6m

ALVINS6350 350mm/6m

Semi-Rigid FlexHigh temperature ducting

• FireRatedAS4254

• Rangehood Exhaust

Model Size mm/m

ALVSRF100 100mm/3m

ALVSRF125 125mm/3m

ALVSRF150 150mm/3m

ALVSRF200 200mm/3m

ALVSRF250 250mm/3m

ALVSRF300 300mm/3m

Non-Return DampersBackdraftshutter,air-streamoperated for installation in-line with circular ducting.

Model Size

ALVBD10 100mm

ALVBD15 150mm

ALVBD20 200mm

ALVBD25 250mm

ALVBD30 300mm

Core FlexCommercial ventilation ducting

• Silver/Black• FireRatedAS4254

Model Size mm/m

ALVHF3100 100mm/3m

ALVHF3125 125mm/3m

ALVHF3150 150mm/3m

ALVHF3200 200mm/3m

ALVHF6100 100mm/6m

ALVHF6125 125mm/6m

ALVHF6150 150mm/6m

ALVHF6200 200mm/6m

ALVHF6250 250mm/6m

ALVHF6300 300mm/6m

ALVHF6350 350mm/6m

FLEXIBLEDUCT

Circular Fire DampersMulti-purpose with zinc-coated steelfinish

Model Size

IFDR4 100mm

IFDR5 125mm

IFDR6 150mm

IFDR8 200mm

IFDR10 250mm

IFDR12 300mm

Square Fire DampersMulti-purpose with zinc-coated steelfinish

Model Size

IFDS66 150mm Sq

IFDS88 200mm Sq

IFDS1212 300mm Sq

IFDS1515 450mm Sq

IFDS2020 500mm Sq

IFDS2424 600mm Sq

DAMPERS

Intumescent Grilles / Fire Dampers*

• Rigidsteelframedgrillethat intumesces to form a firestopbarrier

• Allowsairflowthroughfire-rated walls and floors

• Canbefittedinasteelduct

• Upto2hours fireprotection

• Continuedsavingsasnomoving parts to require operationalchecks

• Largesizes

* Rectangle Intumescent Fire Dampers also available

28 INFO HOTLINE 1300 883 544

Speed ControllersESA1Electronic speed controllers for stepless speed control of single or three phase fans.

Run-on TimerZNEElectronic overrun timer with adjustablerun-ontime0–21minutes. Compact design allows for easy installation. Up to 300 watts.

Star Delta SwitchDS2On/offandreversingswitchfor two speed, three phase star/delta motors. Polymer casing for surface mounting. 12 amps, 5.5Kw.

Temperature ControlTA3Robust electro / mechanic thermostat for temperature dependenton/offoperationfor fans and heaters.

Vortice environmental sensors are designed to detectenvironmentalconditionsie:humidity,temperature,humanmotion,smokeandodourand automatically activate the extractor fans.

Environmental SensorsSUITABLEFORALLVORTICEVARIOMODELS

CONTROLLERS

Vortice RangeC TEMP measures ambient room temperature

CSMOKEmeasurestheairquality

C HCS measures ambient relative humidity

C PIR detects the prescence of a moving body

CTIMER-anadjustableover-runtimer

Code A B C

C TEMP 12992 144 54 55.8

CSMOKE 12993 144 54 55.8

C HCS 12994 144 54 55.8

C PRI 12998 144 54 55.8

C TIMER 12999 144 54 55.8

Vortice Speed ControllerC5 0.5Five speed controller for all Vortice fan products.


Commercial & Industrial

30 INFO HOTLINE 1300 883 544

CarParkJetFansIVAD / IVRD / IDV RANGE

AXIALandCENTRIFUGALJETFANS

Jetfansareusedincarparksfordailyventilationcarryingoutanimpulseeffectonthesurroundingairduetothegeneratedairjet.

CFD: Smoke concentration after the exhaust

CarParkVentilationACarParkVentilationsystemneedstocontroltheconcentrationofpollutants.Everydaythecarparkwillbeexposed to exhaust fumes from the cars driving in and out.

Theaveragelengthofstayinacarparkislessthan1hour.Nevertheless, the system must be able to control the indoor air quality and provide persons present with a healthy environment.

Ourresearchanddevelopmentteamshavedesignedtheinductionfantoeffectivelycontrolpollutants.Oneofthereasons behind the slim casing design was to be able to position the fans on the driving lanes where people will be present. The induction fans, in combination with the supply and exhaust ventilation, effectively flush the driving lanes with fresh air.

Induction fans will give a constant airflow that is a constant pulse and because the pulse is constant we call it thrust. With this thrust the fan is pushing the surrounding air and, as the fan is fixed to the ceiling, the surrounding air will be moved forward. Furthermore the fan also induces turbulence in the surrounding air, up to 19 times the air actually passing through the fan.

Induction Fans V2 The second generation was implemented in 2007. This new and unique generation of fans has been developed to provide many technical and financial benefits and advantages, using the unique patented outlet venturi and the ultra-flat centrifugal impeller, resulting in a very low installation height of 257mm.

The minimised casing height in combination with the special designed outlet nozzles enables a designer to position the fans at the ideal location.

Thisflexibilityallowsforthefollowing:

• Areductioninthenumberofthrustfansrequired(byupto65%) due to improved system performance

• Lowerenergyconsumption

• Fewercables,includingancillaries

• Lowerinstallationcosts

• Lowermaintenancecosts


CAR PARK JET FANS

ControlsACCESSORIESFORYOURCONVENIENCE

Gas Controller SystemsThe DGC-05 gas controller fulfills the functions of monitoring carbonmonoxide(CO).

The controller can monitor and process up to 98 digital and/oranaloguegastransmitters.Fivefreeadjustablealarm thresholds are provided per transmitter. For the alarm messages, up to 30 alarm relays with potential free-changeover contact and up to 12 analogue outputs are available.

In addition, the gas control is available with an uninterruptible power supply supported by a rechargeable battery. The optional data logger function permits to protocol all measured values, alarms and faults.

CarbonMonoxide(CO)TransmitterForthedetectionofcarbonmonoxide(CO).

COtransmitterincludingdigitalmeasurementvalueprocessing and temperature compensation for the continuous monitoring of the ambient air to detect carbon monoxide concentrations. The transmitter possesses a standard analogue output4–20mAor2–10VDC.

Variable Speed DrivesA complete motor control solution is available utilising the latest technology in VSD’s designed especially for the HVAC industry.

32 INFO HOTLINE 1300 883 544

Technical Data

ModelAir Flow Speed Max. Air Flow Volume RPM Sound Pressure Level Nominal Motor Power

CurrentNominal Weight ca.

Full Load Initial

m/s V m3/h min-1 (dB(A) kW Amps Amps kg

IDV-HC Sv2 22 68401420 High

720 Low

60 High

51 Low

1.3 High

0.22 Low3.0 1.15 82

IDV-HC Lv2 28 11,1601425 High

720 Low

75 High

53 Low

2.2 High

0.37 Low5.0 2.0 120

IDV-HC SeriesCARPARKVENTILATIONFANS

TWINNOZZLECENTRIFUGALJETFANS

• Wider,longerplumes

• Lessfansrequired

• Reducedinstallationcosts

• Cheaperrunningcosts

• Lownoise

Double-widthplumegivesdoubleeffectivearea.Install half the number of units compared to standard models.

Dimensions

Features

The dual purpose IDV-HC-v2 series garage ventilation fans are designedtodirectairthroughthecarpark.

The suction of the fan is through the fan guard and inlet cone on the bottom of the fan. The discharge is through the outlets at the front of the fan.

The ventilator unit is directly driven by a standard electric motor integrally mounted in the air stream, the impeller has backwardcurvedbladesandisdirectlymountedontheshaftof the integral motor.

The motor employed is of the type IP55. Insulation Class H. The connection voltage for the motor is 400v/3ph/50Hz. The ventilation unit must be correctly grounded at all times.

Sv2

Lv2


IVRD SeriesCARPARKVENTILATIONANDEXTRACTORFANS

CENTRIFUGAL JET FANS

Quietanduniversalinapplication–settingthe standard in thrust and weight. Suitable for ventilationofcarparkswithambienttemperaturefrom up to 40oC.

Dimensions

Technical Data

ModelThrust Air Flow Speed

Max.

Air Flow

Volume

RPM

Sound

Pressure

Level

Nominal

Motor

Power

CurrentWiring

Diagram

Nominal

Weight ca.

Anti Vibration

Mounts (4 pcs)Full Load Initial

N m/s V m3/h min-1 (dB(A) kW Amps Amps Number kg Type Ref No

500/4 43N 43 21.3 6100 1440 73 1.0 3.3 20.5 498 63 SDZ 2 1455

560/4 75N 75 25.2 8900 1420 76 2.20 4.6 34 498 72 SDZ 2 1455

• Lownoiseemission

• Maximumthrust

• Easyandfasttoinstallduetolightweight, aluminium construction.

• Directdriven,centrifugal

Features

43N

75N

34 INFO HOTLINE 1300 883 544

AXIALJETFANS

IVAD SeriesCARPARKVENTILATIONANDEXTRACTORFANS

• Lownoiseemission

• Maximumthrust

• Easyandfasttoinstallduetolightweight, aluminium construction.

• Directdriven,axial

• Optionallyfullyreversible(ModelIVA..R..)

Slimline, compact, lightweight and powerful. Perfect even in limited spaces. Suitable for ventilation of car parkswithambienttemperaturefromupto40oC.

Dimensions

320

345

440

270

75018201963

ø14

Features

Technical Data

ModelThrust

Air Flow

Speed

Max.

Air Flow

Volume

RPM

Sound

Pressure

Level

Nominal

Motor

Power

CurrentWiring

Diagram

Nominal

Weight ca.

Anti Vibration

Mounts (4 pcs)Full Load Initial

N m/s V m3/h min-1 (dB(A) kW Amps Amps Number kg Type Ref No

315/2 25N 25 15.9 4600 2840 58 1.10 2.4 16.6 498 37 SDZ 1 1454

320

345

440

270

75018201963

ø14


IVRD / IVAD JET FANS

Special FeaturesHIGHTHRUSTPERFORMANCE

Silent and universal in application, setting the standard in thrust and weight.

Casing

Duct casing from corrossion-resistant aluminium with motor support and ceiling suspension. Aerodynamically-shaped inletwithsafetyguardandextractconewithadjustableguidevanes.Fullyreversibletypeswithadjustableguidevanesonboth sides.

Impeller

Highefficientimpellerforunidirectionalorreversibleoperation.DynamicallybalancedaccordingtoDINISO1940-1, balancing quality 6.3. With aerodynamically-optimised impellerfromcorrossion-resistantaluminiumalloy,adjustableat standstill.

Motor

IEC 3-phase standard motor protection to IP 55.

Noise Insulation

By polygon silencers on both sides. High quality casing from aluminium, completely acoustically-lined inside with abrasion-proof mineral wool according to DIN 4102 (not flammable) retained by perforated steel sheet.

InstallationMounting rails integrated in series. They are attached directly to the ceiling by means of rawl plugs (accessories, to be provided on site) at four fastening points. The use of anti-vibration mounts is recommended.

Electrical Connection

Terminalboxfromaluminiumdie-castingfittedexternallyoncasing as standard (IP 55).

High quality, powerful jet fan with optimal dimensions for minimum space.

Casing

Casing from corrosion-resistant aluminium in compact design. Aerodynamically-shaped inlet cone. Permanently optimal surface protection by steel-powder coating.

Impeller

Highefficientcentrifugalimpellerwithwelded,backward-curvedblades.DynamicallybalancedaccordingtoDINISO1940-1, balancing quality 6.3.

Motor

IEC 3-phase standard motor protection to IP 55.

Installation

Assemblybracketintegratedasstandard.Theyareattacheddirectly to the ceiling by means of rawl plugs (accessories, to be provided on site) at four fastening points. To avoid vibration transmission the use of anti-vibration mounts is recommended.

Electrical Connection

Terminalboxfrompolymerfittedexternallyoncasingasstandard (IP 55).

IVRD Features IVAD Features

36 INFO HOTLINE 1300 883 544

Speed ControlBoth HQ and HW are speed controllable by voltage reduction (transformer controller or electronic controller).

Reversed OperationHQ and HW are reversible when wired to a DSEL reversing switch. For reverse airflow direction allow for ¹/₃ drop in performance.

InstallationInstallation in any position. Ensure that motor drainage holes face downwards.

Sound LevelsBoth sound power and sound pressure levels are shown on each performance curve. Sound pressure levels are measured at4metreinfreefieldconditionsandarethecalculatedaverage between the inlet and exhaust data.

HQ and HW SeriesCOMPACTANDFULLYREVERSIBLE

PLATEAXIALFANS

Arangeofcompactfixed-pitch,plate-mounted,axial-flow fans suitable for wall or panel mounting.

Dimensions - HQ/HW Series

Plate Axial Fan FeaturesCasingManufactured in galvanised sheet steel. Models HQ and HW have the additional protection of two coats of light grey paint.

ImpellerHighlyefficient,profiledsevenbladeimpeller,dynamicallybalanced and manufactured from impact-resistant polymers. Suitable for -30oC to +60oC.

MotorTotally enclosed, reversible motor with a die-cast aluminium casing, protected to IP 54. Sealed-for-life ball bearings with tropicalised protection of windings and radio suppression. All models have automatic resetting thermal contacts wired in series with the motor windings. Terminals in motor cap (IP 55). Powder-coated motor side wire guard.

Fan nominal

size in mm

Dimensions

A B C D E F G H

200 204 203 50 100 100 310 280 6.5

250 254 280 60 100 100 360 30 9.0

315 319 345 65 160 160 440 410 9.0

355 359 390 70 190 230 475 440 9.0

400 404 440 70 200 200 525 490 9.0

450 454 490 90 220 220 575 535 9.0

500 504 550 90 220 270 655 615 9.0

560 560 630 140 210 260 730 675 11.0

630 630 700 150 200 390 810 750 11.0

710 710 810 220 390 410 895 810 11.0


Singlephasemodels230V/1ph./50HzSELECTIONDATA

Fan Code Speed Air flow Motor powerCurrent temp. Max. air flow

Weight Sound level @ 4mfull load standard speed control

Square plate Ring Plate rpm m3/hr kW A +oC +oC Kg dB(A)

HQW200/4 1360 144 0.03 0.11 60 40 2.7 30

HQW200/2 2300 253 0.07 0.26 60 40 2.7 43

HQW250/4 1380 267 0.04 0.20 60 40 7.5 44

HQW250/2 2590 531 0.23 1.10 60 40 6.5 63

HQW315/4 1405 589 0.13 0.60 60 40 8.0 51

HQW355/4 1405 844 0.19 0.95 60 40 9.5 55

HQW400/4 1320 1211 0.25 1.3 60 40 13.0 59

HQW450/6 960 1125 0.18 0.9 60 40 15.5 49

HQW450/4 1250 1494 0.49 2.10 60 40 15.5 62

HQW500/6 910 1492 0.22 1.10 60 40 17.3 52

HQW500/4 1410 2311 0.55 2.30 40 40 17.3 65

HQW560/6 955 2250 0.35 1.80 60 40 22.0 52

HQW560/4 1405 3586 0.90 4.50 40 40 25.0 62

HQW630/6 955 2922 0.45 2.50 60 40 25.0 55

HQW630/4 1415 4964 1.25 6.60 40 40 35.0 65

HQW710/6 925 3889 0.50 2.50 40 40 60.0 61

Threephasemodels400V/3ph./50HzSELECTIONDATA

Fan Code Speed Air flow Motor powerCurrent temp. Max. air flow

Weight Sound level @ 4mfull load standard speed control

Square plate Ring Plate rpm m3/hr kW A +oC +oC Kg dB(A)

HQD315/4 1330 589 0.10 0.25 60 40 8.0 51

HQD315/2 2700 1114 0.51 1.00 50 40 8.0 70

HQD355/4 1420 844 0.29 1.12 60 40 9.5 55

HQD355/2 2650 1556 0.88 1.60 50 40 14.0 74

HQD400/4 1380 1211 0.30 0.85 60 40 13.0 59

HQD400/2 2800 2347 1.40 2.80 40 - 17.5 78

HQD450/4 1350 1611 0.48 0.90 50 40 15.5 62

HQD500/4 1320 2164 0.61 1.25 40 40 17.2 65

HQD560/4 1380 3586 0.80 1.75 40 40 23.0 62

HQD 630/6 970 2922 0.49 1.80 60 40 28.0 55

HQD630/4/4 1390 4964 1.33 3.80 40 40 35.0 65

HQD740/4/4 26 deg 1370 6556 2.20 5.90 40 40 75.0 71

HQ and HW Series QuickSelectionGuide


38 INFO HOTLINE 1300 883 544

GB SeriesQUIET AND MULTIPLE DISCHARGE

GIGABOX

Particularly suitable for medium to higher air flow volumes against high resistances in ventilation systems of every type.

Compact frame construction and assembly-friendly accessoriesmakeavariableandthusoptimaladaptationpossible by simply repositioning the casing panels to the structuralconditions.Withfiveor(withseriesT120)threepossible discharge directions this gives design flexibility to suit allsiteconditions.Alltypeshaveintegratedcranehooksforeasier positioning as standard.

They are particularly suitable for medium to higher air flow volumes against high resistances in ventilation systems of every type. Furthermore, the new series GB.. T120 is suited for extraction of dirty, hot air up to 120oC. Altogether, 26 models are available with air flow volumes from 1,400 to 19,000 m3/h for duct diameters 250 to 710 mm.

GigaBoxesfromAllventaredeliveredcompletewith:

• Dischargeadaptorfromsquaretocircularductedsystem for low-loss discharge

• Flexiblesleevestoreducevibrationtransmissionandfor the connection to ducts in the usual standard diameters

Backwardcurvedhighoutputcentrifugalimpellerguaranteesanenergy-efficientoperationatlownoiseemission.

Thedouble-walled,removable20mmthicksidepanelsarenoiseand temperature insulated with flame retardant mineral wool.

This allows for a variable installation and simple inspection access.Extensiveaccessorieslikewallbracket,condensatecollector including condensate spigot (for GB.. T120 included in delivery), external weather louvres to cover the exhaust opening, outdoor cover hood for protected outdoor installation ensure for the necessary flexibility on site.

TheT120modelimpresseswithoutstandingbenefits:

• Airflowtemperatureuptomax.120oC.

• Motorlocatedoutsideofairflow.

• Temperatureinsulatedpartitionpanelbetweenmotor andimpeller,linedwith20mmthick,flame-retardantmineral wool.

• Easilyaccessiblemotor-impeller-unit,removablewithoutdisassembling the system components.

• Inspectioncoverwithhandle,simplyremoveforcleaning and maintenance.

• Condensatecollectorwithcondensatespigotincluded in delivery.

• Accessorycomponentssuitableforusetomax.120oC.

For applications with high air flow temperatures and/or steam/humidity present in the exhaust air, the GigaBox T120 is ideally suitable.

Ideal for application in exhaust air systems of process technologyorincommercialkitchens.


Fiveremoveablemultifunctionpanelsoffer

almost unlimited flexibility in all applications.

GigaBox Models Available

Type GB.. Type GB..T120

GBW 250/4 GBW 355/4 T120

GBW 315/4 GBD 355/4/4 T120

GBW 355/4 GBW 400/4 T120

GBD 355/4/4 GBD 400/4/4 T120

GBW 400/4 GBW 450/4 T120

GBD 400/4/4 GBD 450/4/4 T120

GBW 500/4 GBW 500/4 T120

GBD 500/4/4 GBD 500/4/4 T120

GBW 500/6 GBD 560/4/4 T120

GBD 560/4/4 GBD 630/4 T120

GBD 560/6/6

GBD 630/4/4

GBD 630/6/6

GBD 710/6/6

OptionalECmotoravailableinGB..models

DimensionsRefer to Helios Catalogue

Designed for exhaust air systems in commercial kitchens the GigaBox GB.. T120 have motors located out of the air stream. Easily accessible casing and double-walled side panels makes cleaning simple with grease dissolving agents and steam.

CallustodaytofindoutmoreaboutthequiteandpowerfulGigaBox.

GigaBox and Accessories

More about GigaBox...

Performance CurvesRefer to Helios Catalogue

40 INFO HOTLINE 1300 883 544

TheGBserieshasflexibleassemblybyfivepossibledischargedirections.

Roof installation with outdoor cover hood and external weather louvres (accessories).

Outdoorinstallationwithwallbracket(accessories).

Installation in the attic with anti-vibration mounts (accessories).

Straight-through Discharge 900 Discharge Discharge on both sides

GIGABOX

GigaBox Discharge Examples with Application


TheGBserieshasflexibleassemblybyfivepossibledischargedirections.

CallustodaytofindoutmoreaboutthequiteandpowerfulGigabox.

Sound

Press.

Case

Breakout

Sound

Press.

Intake

Air Flow Volume vm3/s Against Static Pressure

Type GB..T120 LPA

dB(A)L

PA

dB(A)

(ΔPstat.

) in Pa

0 50 100 150 200 250 300 350 400 500 600 700 800

GBW250/4 27 39 389 319 244 147

GBW315/4 29 41 414 361 300 236

GBW355/4 34 46 817 747 675 505 258

GBD355/4/4 34 46 836 772 711 638 577 492 367

GBW400/4 38 50 1142 1092 1036 975 917 85 764 656 511

GBD400/4/4 38 50 1097 1031 961 889 811 725 628 469 114

GBW450/4 40 52 1514 1433 1361 1292 1217 1122 1006 867 692

GBD450/4/4 40 52 1514 1431 1344 1256 1161 1061 947 822 664

GBW500/4 45 57 2333 2336 2139 2042 1947 185 1744 1628 1506 1219 778

GBD500/4/4 44 57 2458 2367 2278 2189 2097 2006 1903 1789 1664 1369 947

GBW500/6 35 46 1600 1478 1347 1189 978 678 144

GBD560/4/4 44 57 3497 3397 3300 3203 3106 3011 2911 2811 2706 2461 2142 1731 1144

GBD560/6/6 35 48 2400 2261 2114 1953 1767 1539 1239 767

GBD630/4/4 48 61 4153 4058 3961 3869 3775 3683 3592 3500 3403 3194 2953 2675 2333

GBD630/6/6 43 56 3192 2992 2794 2567 2375 2103 1767 1356 792

GBD710/6/6 46 59 5194 4989 4783 4564 4333 4083 3811 3511 3178 2333 753

Type GB..T120 LPA

dB(A)L

PA

dB(A)

(ΔPstat.

) in Pa

0 50 100 150 200 250 300 350 400 500 600 700 800

GBW355/4 36 49 961 894 831 767 583 567 418 201

GBD355/4/4 36 49 964 908 846 778 697 594 469 192

GBW400/4 40 53 1369 1293 1217 1136 1053 942 806 622 439

GBD400/4/4 40 53 1353 1275 1193 1106 1014 900 76 581 381

GBW450/4 45 57 1975 1887 1800 1700 1625 1525 1426 1317 1208 917 528

GBD450/4/4 45 57 1994 1914 1833 1750 1653 1556 1450 1336 1206 897 372

GBW500/4 45 59 2318 2244 2158 2075 1989 1903 1800 1696 1575 1300 975 511

GBD500/4/4 45 59 2319 2239 2157 2081 1994 191 1833 1739 1642 1381 1061 533

GBD560/4/4 48 62 3417 3322 3247 3164 3078 2994 2910 2817 2722 2533 2336 2064 1671

GBD 630/4 53 67 3928 3867 3803 3742 3667 3594 3533 3469 3397 3242 3097 2908 2703

GigaBox QuickSelectionGuide

42 INFO HOTLINE 1300 883 544

ConstructionFabricated from powder coated galvanised steel in compliance withAS/NZS1668.1:1998forkitchenexhaustsystems.Highperformancebackwardcurvedcentrifugalimpellersaredrivenby TEFC motors incorporating sealed for life bearings. Class F motors are rated to 80oC ambient air temperature. Class H motors are rated to 120oC ambient air temperature. Available in optional ColourbondTM colours.

Dimensions

Technical DataModel Full Load Current kW dBA @ 3m

KMV315-4DD 0.9 0.37 47

KMV315-6DD 1 0.37 41

KMV355-4DD 0.9 0.37 51

KMV355-6DD 1 0.37 43

KMV400-4DD 0.9 0.37 54

KMV400-6DD 1 0.37 45

KMV400-8DD 1.1 0.37 38

KMV450-4DD 1.7 0.75 57

KMV450-6DD 1.1 0.37 47

KMV450-8DD 1.2 0.37 40

KMV500-4DD 2.4 1.1 60

KMV500-6DD 1 0.37 50

KMV500-8DD 1.1 0.37 43

KMV560-4DD 4.4 2.2 65

KMV560-6DD 1.7 0.55 54

KMV560-8DD 1.1 0.37 44

KMV630-4DD 7.7 4 69

KMV630-6DD 2.6 1.1 57

KMV630-8DD 1.7 0.55 49

KMV710-6DD 4.8 2.2 61

KMV710-8DD 2.1 0.75 47

A B C D E F

KMV310 410 310 50 600 355 545

KMV350/400 500 400 50 690 450 600

KMV450/500/560 720 620 60 915 585 755

KMV630/710 810 710 60 1135 655 865

KITCHENEXHAUSTFANS

CENTRIFUGAL FANS

This series is a range of high performance all metalfansforuseinkitchenexhaustandgeneralventilation applications. Motors are mounted out of the air stream and wind bands are secured with clip fasteners to allow easy access for servicing and cleaning.

Vertical Discharge

* Also available in 3 phase



Model Power Speed Sound Base Dimensions

Vertical Discharge

Horizontal Discharge

Motor kW

FLA Phase RPM dB(A) @ 3m

A max B min

RCV190-2E 0.07 0.32 1 2880 42 265 215

RCD190-2E 0.07 0.32 1 2880 42 380 325

RCV220-2E 0.08 0.34 1 2880 55 265 215

RCD220-2E 0.08 0.34 1 2880 55 295 245

RCV220-4E 0.08 0.34 1 1440 38 265 215

RCD220-4E 0.08 0.34 1 1440 38 295 245

RCV280-4E RCD280-4E 0.08 0.38 1 1440 44 395 345

RCV280-6E RCD280-6E 0.08 0.35 1 960 37 395 345

RCV315-4E RCD315-4E 0.12 0.5 1 1440 46 395 345

RCV315-6E RCD315-6E 0.12 0.5 1 960 38 395 345

RCV355-4E RCD355-4E 0.3 1.12 1 1440 48 500 400

RCV355-6E RCD355-6E 0.08 0.31 1 960 39 500 400

RCV400-4E RCD400-4E 0.49 2.2 1 1440 53 500 400

RCV400-6E RCD400-6E 0.15 0.68 1 960 45 500 400

RCV450-4E RCD450-4E 0.69 3 1 1440 54 720 620

RCV450-6E RCD450-6E 0.29 1.42 1 960 46 720 620

RCV500-4E RCD500-4E 1.43 5.7 1 1440 58 720 620

RCV500-6E RCD500-6E 0.5 2.34 1 960 44 720 620

RCV560-6E RCD560-6E 0.79 3.5 1 960 46 720 620

ConstructionComponents are made from UV stabilised polymer, corrosion protectedsteelandfibreglass.Allmodelsarefittedwithbirdmesh as standard. Available in optional ColourbondTM

colours.

Dimensions

ROOFVENTILATORS

CENTRIFUGAL FANS

Roof Mounted

Technical Data

* Also available in 3 phase


This series is a range of small diameter vertical and horizontal discharge fans for general ventilation applications. Suitable for medium air flow and pressure duct systems.

44 INFO HOTLINE 1300 883 544

Lowprofilealuminiumcowlstoextractorsupplyair through the roof for domestic and light commercial applications.

Technical DataModel Size l/s Fan Air

ALVSECD0530 150 130 Centrifugal Extraction

ALVSECD0532 150 80 Axial Extraction

ALVSECD0534 150 80 Axial Supply

Features• Fanincorporatedincowl

• Aluminiumcowlconstruction

• Pleasingaesthetics

• Highqualityforlongevityofoperation

• Electricalconnectioncanbemadeinsideoroutsideroofspace(interiorjunctionboxincluded)

• Lownoisewithinpremises

• Dektiteoraquasealincluded(formetal-basedroofs)

• OptionalleadDektiteoraquasealavailable(extracost)

Cowls (Domestic/Light Commercial)General purpose cowls used for relief air.

Technical DataModel Size Description

ALVRCK 150M 150mm Metal–roof

ALVRCK 150T 150mm Tile–roof

ALVRCK 200M 200mm Metal–roof

ALVRCK 200T 200mm Tile–roof

• Suppliedwith600mmtube

• Othersizesavailable:100mm,125mm,250mm,300mm

Roof Cowl Kit Cowl Rubber Dektite to suit metal roof

Aluminum Dektite to suit tile roof

SECD SeriesEXTRACTORSUPPLY

ROOFMOUNTEDFANS


Industrial Fan RangeAFFORDABLEAIRCIRCULATION

PEDESTAL,WALLANDPORTABLEFLOOR

Model Size (mm) V Hz W rev/min m3/min

ALVPMF-65 650 240 50 230 1400 12,300

ALVPMF-75 750 240 50 350 1400 17,400


ALVWMF-650 650 220 50 230 1400 205

ALVWMF-750 750 220 50 350 1400 290


ALVFD-40 400 240 50 110 1350 4,920

Industrial Pedestal Fan

Industrial Wall Mounted Fan

Industrial Portable Floor Fan

46 INFO HOTLINE 1300 883 544

Air CurtainsREDUCEENERGYCOSTS

HIGHVELOCITYAIR

Features• Elegantandmoderndesignsuitableforeventhemost

high tech settings

• Brushedaluminiumfrontagewithintegratedintakegrilleandrearpanelinblackpaintedsheetmetal

• IRremotecontrol

• 2operatingspeeds

• Tangentialfansforquietoperation

• baseopeningallowsairtoescape

• Adjustableoutletvanescandirectoutgoingsteamofairas desired

Technical Data

ModelWeight

kgV Hz

Watts Air Flow (m3/h) dB(A) @ 2m Dimensions

Min Max Min Max Min Max W x H x D(mm)

AD900 10 230 50 110 160 1100 1400 55 57 900x220x190

AD1200 12.5 230 50 150 200 1600 1900 56 58 1200x220x190

AD1500 15.5 230 50 180 230 2000 2500 57 59 1500x220x190

AD2000 20.5 230 50 300 350 2900 3600 59 61 2000x220x190

VorticeAirCurtainsworktocirculatecleanairwithinyourworkzoneandthewhisperquietoperationensuresminimalnoise and impact in your environment.

Theaircurtainsallowcustomersandstafftoenterandleavefreely without obstructing the passageway and providing maximum visibility into the room.

Air curtains can also be used inside the building to separate roomswithdifferentenvirnmentalconditionseg:heatedofficeareaswithunheatedwarehouses,diningareasnexttokitchens.Thisfacilitatesthetransitofstaffandpreventsodoursand vapours being transferred into from area to area.

Air Curtains create an invisible barrier separating zonesofdifferenttemperatureswhilepreventingpollutants(dust,odours,smokeetc)andinsectsenteringyourworkenvironment.


Technical Data

ModelWeight

kgV Hz

Watts Air Flow (m3/h) dB(A) @ 2m Dimensions

Min Max Min Max Min Max W x H x D(mm)

AD900 10 230 50 110 160 1100 1400 55 57 900x220x190

AD1200 12.5 230 50 150 200 1600 1900 56 58 1200x220x190

AD1500 15.5 230 50 180 230 2000 2500 57 59 1500x220x190

AD2000 20.5 230 50 300 350 2900 3600 59 61 2000x220x190

0

1.0

2.0

3.0

4.0

8–11.5

4–5

3–4.5

2–3.5

“We installed Allvent Air Curtains to reduce energy costs for our air

conditioning and found the added bonus of odours from our fishery not

entering the restaurant area.”– Satisfied Customer

Allvent are the only stockist of the 2000mm wide Air Curtain unit.

The cost efficient solution for wider doorways!

48 INFO HOTLINE 1300 883 544

Industrial and Commercial Ventilation NotesIDV-HC Series

IVRD Series

IVAD Series

HQ / HW Series

GigaBox

KMV Series Kitchen Exhaust

RCV / RCD Series Roof Mounted Ventilation

SECD Series Roof Mounted Extract or Supply

Industrial Cooling Fans

Air Curtains


Heat

50 INFO HOTLINE 1300 883 544

Transfer hot air from air conditioners and heaters from one room to another.

Threekitsspeciallydesignedtosuityourfamily’s needs.

Heat Transfer KitEXTRACTANDSUPPLY

SHARE THE WARMTH

Kit 1: ALV150HTKIT1 153l/s 550m3/hr

• 1xDF150in-linemixed-flowfan

• 2x6WRC–150mmceilinggrilles

• 1x6m/150mminsulatedflex

• 1xducttape

Kit 1a: ALVA60HTKIT1A 91l/s 330m3/hr

• 1xA60axialfan



• 1xducttape

Kit 1/1a: Room to Room Kit 2:OneRoomtoTwoRooms Kit 3:OneRoomtoThreeRooms

Speed controllers are available to allow easy airflow adjustment for just the right amount of coziness in your home.

Also available:





• 1x150mmYfitting

• 1xducttape



• 1x8WRC–200mmceilinggrille


• 1xDBTO–200/150/150/150



• 1xducttape


Relax in the

warmth of

your own

home

Allvent Heat Transfer Kits are specially

designed to economically draw warmed air

from the room with the main heat source

(suchasafireplaceorcombustionstove)

and convey it to other rooms in your home.

Ideal to boost warmth and comfort levels in

cold bedrooms and chilly study areas.

Keep your family warm for less!

52 INFO HOTLINE 1300 883 544

COMMERCIALANDDOMESTICAPPLICATIONS

INFRARED WALL HEATERS

Thermologikaissuitablefordomesticandcommercial applications when instant heat is necessary or in places with direct or continuous contact with the outside.

Thermologika

Technical DataModel V Hz W A Kg IP

Thermologika 230 50 600/1200/1800 7.8 1.6 IPX4

Features• Wallinstallationwithcompactdimension

• Ensuresimmediatecomfort

• Nomovingparts,maximumsilence

• Heatuptimeapprox.30seconds

• Choiceof3poweroutputswithapullswitch

• Canbeswitchedonandoffremotely

• Easyinstallationandmaintenance

• Adjusttodirectheatwhereneeded

A B C

Thermologika 540 123 100

Dimensions


A B C

Soleil Plus 395 130 120

FORINDOOROROUTDOORUSE

INFRARED WALL HEATERS

Thermologikaissuitablefordomesticandcommercial applications when instant heat is necessary or in places with direct or continuous contact with the outside.

ThermologikaSoleilPlus


ThermologikaSoleil Plus

230 50 1500 6.5 1.5 IPX5

Features• Heatconcentratedtotargetareas

• Wallorceilinginstallation,horzontallyorvertically

• Grilleissheered,bent,aluminiumsheet

• Casingisextrudedaluminiumwith epoxy polyester resin paint

• Lamp:HalogenHeLentechnology,highlyefficient, long lasting

• Strongandlightweight

• Immediateheatdelivery

• Highradiatingefficiency

Dimensions

54 INFO HOTLINE 1300 883 544

SAFE, STURDY, STYLISH

COMPACTWALL-MOUNTEDFANHEATERS

Microrapid series are particularly user-friendly while improving operational safety. They are intended for primary heating in situations where there is no central heating or it is undersized.

Microrapid Range


Microrapid 2000 V0 230 50 800/1200/2000 8.7 4.2 IPX4

Features• Smalldimensions:idealforcrampedareas

• Splashprotected,installationintodampenvironments

• Selectableheatingpower

• Extremelysilent

• Resinpartshavehighmechanicalstrengthathightemperatures

• V0self-extinguishingplastic

Dimensions

A B C

Microrapid 2000 V0 863 258 109


Hygiene

56 INFO HOTLINE 1300 883 544

BC1800WECONOMICAL

DOLPHINHANDDRYER

DOLPHINHANDDRYER

BC2200WSTYLISHANDROBUST

Technical DataModel Dimensions (mm) Finish

ALVBC1800W H 220 x W 248 x D 170 White Die-cast Aluminium

Features • Twoyearguarantee

• Die-castwhitemetalcoverforstrengthanddurability

• Superiortechnicaldesign–dualthermaloverloadprotection on motor and heating element

• CertificationofCompliancetoforemostinternationalsafetystandards and performance standards

• ‘Notouch’operationbyelectronicinfra-redsensormaximises hygiene and economy of operation

• Fullyautomaticoperationswitchesoffwithin3seconds ofhandremoval–infra-redsensor

• Powerrating:Heatingelement1700w

• 100wbrushlessmotor(3450rpm)

• Soundlevel:63+/-3dB

Features• Twoyearguarantee

• Die-castwhitemetalcoverforstrengthanddurability

• Superiortechnicaldesign–dualthermaloverloadprotection on motor and heating element

• CertificationofCompliancetoforemostinternationalsafetystandards and performance standards

• ‘Notouch’operationbyelectronicinfra-redsensormaximises hygiene and economy of operation

• Fullyautomaticoperationswitchesoffwithin3seconds ofhandremoval–infra-redsensor

• Powerrating:Heatingelement2100w

• 100winductionmotor

Technical DataModel Dimensions (mm) Finish

ALVBC2200W H 210 x W 320 x D 175 White Die-cast Aluminium


DOLPHINHANDDRYER

BC2001VELOCITYHIGHSPEED

Technical DataOrder code Dimensions (mm) Finish

BC 2001 H 301 x W 230 x D 189 Satin Stainless Steel


• Autoresettingthermostat

• 1600wdryer

• 700wmotor

• 900wheatingelement

• Automaticinfraredsensor

• Adjustableairspeed:75–100m/second

• Drieshandsinlessthan10seconds

• Autoshutoffin60seconds

• Airoutputto100m/second

• Lowenergyusage–reducespowerconsumptionbyupto70%

BC2002STYLISH AND ENERGY EFFICIENT

DOLPHINHANDDRYER


• Quality304GradeStainlessSteelbody

• Operatingpowerofonly1000w(500wheatingelement)saving 80% of user’s energy costs

• Smallestdryerintherange–lessthanhalfthesizeofequivalent high speed dryers

• Infrared,selfadjustingsensor:51mm–254mmrange

• Dryerdelivers101.7m3/hour (90m/s) Thisdrieshandsin10–15seconds,reducingCO2 emissions.

• 29000rpmbrushmotor

• 55O

C air output temperature

Technical DataOrder code Dimensions (mm) dBA Finish

BC 2002 H 230 x W 246 x D 145 75 Satin Stainless Steel

58 INFO HOTLINE 1300 883 544

DOLPHINHANDDRYER

BC2006VELOCITYSEMI-RECESSED



• 1600wdryer

• 350–700wmotor(adjustable)

• 450–900wheatingelement(adjustable)

• Automaticinfrared,self-adjustingsensor:51mm–330mm

• Drieshandsinlessthan10seconds

• Autoshutoffin60seconds

• Airoutputat75–100m,self-adjusting

• Lowenergyusage–reducespowerconsumptionbyupto70%

• Availableinpolishedstainlesssteelonrequest

Technical DataOrder code Dimensions (mm) Finish

BC 2006 H 513 x W 250 x D 62 Satin Stainless Steel

Recess dimensions: H 495mm x W 235mm x D 122mm

BC2011VELOCITYAIRSPEED

DOLPHINHANDDRYER


• Availableinsilverandwhite


• Ratedpower:850w,6.5A

• IP22watersplashproof

• HighspeedbrushlessDCmotor

• Drieshandsin6–10seconds

• Saves70%ofenergyusedbyastandardhanddryer

• Re-useablefilter

• Driptraystopswaterrunningontothefloor

• Suitableforhotels,offices,storesandotherpublicareas

• SmartupmarketlookwithLCDdisplay

• Energysavingandenvironmentallyfriendly

Technical DataModel Dimensions (mm) Finish m/s

BC 2011 H 650 x W 300 x D 190 Silver 65jetairflow

BC 2011W H 650 x W 300 x D 190 White 65jetairflow


To choose the right fan for your purpose, we need to calculate the airflow required for your room in m3/hr. Allvent has developed this easy-to-use four step guide to determine your m3/hr number and help choose the fan right for you.

Fan Selection Guide

UsingthefigureyoucalculatedinStep3,selectthefanfromthetablewhichmostcloselyfitsyourneeds.

We recommend that you choose the fan to the nearest value HIGHER than your number. For example, if the number you calculated at the end of Step 3 is 260 m3/hr, choose a fan with a m3/hr higher than 260.

Model m3/hr Model m3/hr Model m3/hr Model m3/hr Model m3/hr

150/6”AR 235 HR90 95 NVF13 180 100V0 180 ALVSECD0530 468

230/9”AR 480 HVR150 260 NVF15 270 125V0 250 ALVSECD0532 288

300/12”AR 1050 HV200 450 150V0 385

HV250 840 200V0 790

250V0 990

315V0 1740

Window/Wall Wall/Ceiling Ducted Ceiling Inline FanExternal

(Roof Mounted)

Bathroom 10Toilet 12Laundry 20Kitchen 25Sub-floor 6

60 INFO HOTLINE 1300 883 544

Documents

ALLVENT VENTILATION PRODUCTS PRODUCT CATALOGUE · 4 INFO HOTLINE 1300 883 544 The excellent design of the MiniVent®, M1 blends in beautifully everywhere, even in the most demanding