1

AmirAZadpoorPersonaldata Address: Dept Biomech Eng, Faculty Mech, Marit & Mater Eng,

Delft Univ Tech (TUDelft), Mekelweg 2, Delft 2628 CD, The Netherlands. Tel: +31-(0)15-2781021, Cell: +31-643447445, Email: a.a.zadpoor@tudelft.nl, azadpoor@gmail.com, Website: www.zadpoor.com ResearcherID profile: http://www.researcherid.com/rid/A-8510-2008

Summary• PhD cum laude, 2010, TUDelft. • Current positions: Associate Professor and Chair of Biomater & Tissue Biomech section. • Main expertise: Biofabrication, biomaterials, and biomechanics. • Publications indexed in Web of Science: 105, H-index: 25 (Web of Science). • Total funded research: c.a. € 3.6 m. • Editorial positions in international peer-reviewed journals: 14, Reviewer for >60 journals. • Organizer/program committee member of international meetings: 6. • Current PhD students: 9 (+4 vacancies), Graduated PhD students: 2. • Current MSc students: 9, Graduated MSc students: 15.

Education• PhD cum laude, Faculty Aerospace Eng, TUDelft. 2006-2010 • MSc with honors1, Faculty Biomedical Eng, Amirkabir Univ Tech. 2004-2006 • BSc, Dept Mech Eng, Iran Univ Sci Tech. 2000-2004

Professionalexperience• Chair of Biomater & Tissue Biomech section (sectieleider), Dept Biomech

Eng, Faculty Mech, Marit, & Mater Eng, TUDelft. 2014-present

• Associate Professor (tenured), Dept Biomech Eng, Faculty Mech, Marit, & Mater Eng, TUDelft.

2014-present

• Assistant Professor (tenure-track), Dept Biomech Eng, Faculty Mech, Marit, & Mater Eng, TUDelft.

2010-2014

• Visiting Scholar, Institute for Biomechanics, ETH Zurich, Switzerland. Nov 2013-Jan 2014 • PhD researcher, Materials Innovation Institute (M2i), Netherlands. 2006-2010 • Research Assistant, Biorobotics and Virtual Reality Res Lab, Dept Biomed

Eng, Amirkabir Univ Tech, Tehran, Iran. 2004-2006

Honorsandawards• ERC starting grant, European Research Council, 1.5 m€. 2015

• Early Career Award, J Mech Behav Biomed Mater, Elsevier. 2015

• Certificate of excellence in reviewing from J Biomechanics. 2012

• Veni personal research grant, 250 k€. 2011

• Supervising the best BSc final project of TUDelft (together with Dr. Gabrielle Tuijthof), the project was awarded a shared grant of 2 k€.

2011

• Gratification award from Materials Innovation Institute (M2i, Netherlands) for “unique accomplishment” in PhD research (c.a. 2.5 k€).

2010

• PhD research fellowship, Materials innovation institute (M2i), Netherlands. 2006-2010

• Conference travel grant, Int Neurosci Conf, Al-Ain, UAE. 2005

• Student Research Pioneer, Dept Mech Eng, Iran Univ Sci Tech. 2002

• Outstanding Student. 2002

• Second place, National Computer Programming Competition. 2001

• Prizewinner, 1st National Kharazmi Youth Festival of Scientific Innovation. 2000

1 Distinction term translated from the Farsi term ‘Momtaaz’. Weighted average grade: 18.5/20, thesis grade: 20/20.

2

Currentresearchinterests• Biomaterials • Tissue biomechanics • Mechanobiology • Biofabrication • 3D printing, additive manufacturing • Musculoskeletal biomechanics • Regenerative medicine • Skeletal imaging

Fundedresearch(c.a.€3.6m)

• ERC starting grant, “Meta-biomaterials: 3D printing meets origami”, BIO-ORIGAMI, 1.5 m€, PI.

2016-2021

• Delft Global Initiative, “Accessible prosthetics through 3D printing and a smartphone app”, 240 k€, Co-PI.

2015-2019

• Bio-date grant, “Bacterial colony growth in patterned landscapes–the effect of defects on colony morphology”, 4 k€, PI.

205-2016

• Investment Grant, “Selective laser melting equipment for high-precision free-form manufacturing of metals”, c.a. 250 k€, PI.

2014-2015

• Cohesion Grant, “Wire feeding laser deposition as an additive manufacturing technology for metallic implants and engineering components”, 20 k€, Co-PI.

2015

• Dutch Technology Foundation (STW), “Vibrant vision-an acoustic wave-based technology for early diagnosis of cartilage damage”, 488 k€. Co-PI.

2013-2018

• Reumafonds, “The mechanical balance of cartilage and its consequences for daily activity”, c.a. 200 k€, Co-PI2.

2013-2017

• Dassault Systems Simulia Corp, “Development of a musculoskeletal model of the shoulder joint within Abaqus”, 37.5 k€, PI.

2013

• Veni personal research grant, “Mechanobiology in-silico”, 250 k€, PI. 2012-2014

• FP7 European collaborative project, “Enhanced patient safety by computational Modeling from clinically available X-rays to minimize the risk of overload and instability for optimized function and joint Longevity”, TU Delft’s share of funding: c.a. 480 k€, European collaborative grants are officially awarded to institutes (TU Delft) not individual researchers.

2010-2012

• FT Innovations, “Porous titanium for bone substitution”, payment of one PhD student, c.a. 130 k€ (estimated).

2011-2013

Editorialpositions• Editorial Board, Journal of Mechanical Behavior of Biomedical Materials 2015-present • Academic Editor, PLOS ONE. 2013-present • Editorial Board, Scientific Reports (Nature Publishing Group). 2015-present • Guest Editor, Journal of Mechanical Behavior of Biomedical Materials,

Special issue: “Mechanics of 3D printed and additively manufactured biomaterials” (in progress).

2016

• Guest Editor, Annals of Biomedical Engineering, Special issue: “Additively manufacturing and 3D printing of biomaterials: from nano- to macro-scale” (in progress).

2016

• Guest Editor, Materials, Special issue: Biomaterials and Tissue Biomechanics (in progress).

2016

• Guest Editor, J Biomech Eng-Trans ASME, Special issue: Cells, tissues, and biomaterials: mechanics of life at different scales.

2015

• Guest Editor, Metals, Special issue: Metallic Biomaterials (in progress) 2016 • Guest Editor, Materials, Special issue: Mechanics of Biomaterials. 2015 • Academic Editor, PeerJ journal. 2013-present • Editorial Board, Frontiers in Bioengineering and Biotechnology, specialty

section: Frontiers in Biomechanics. 2013-present

• Editorial Board, Applied Bionics and Biomechanics. 2014-present 2Co-author of the proposal and co-supervisor (co-promotor) of the PhD student but not officially mentioned as the co-applicant.

3

• Editorial Board, The Scientific World Journal, section: Mech Eng. 2012-present • Editorial Board, PeerJ Computer Science. 2015-present

ReviewerGrant proposals

• Canada Foundation for Innovation, Canada. • National Osteoporosis Society, UK. • National Research Fund in Luxembourg (FNR), Luxembourg. • Welcome Trust (UK) and Department of Biotechnology (India) alliance.

Award committees • Committee member, ESB student award, 21st Cong Eur Soc Biomech (ESB 2015), July 5-8,

2015, Prague, Czech Republic. • Committee member, Young Investigator best presentation award, 8th Triennial Meet Comb

Orthop Res Soc (CORS 2013), Oct 13-16, 2013, Venice, Italy. Journals

• Advanc Func Mater • Acta Biomaterialia • Biofabrication • Langmuir • J Amer Chem Soc • Annals Biomed Eng • Osteoarthritis & Cartilage • J Biomed Mater Res A • J Mech Behav Biomed Mater • Mater Sci Eng C • J Biomech • J Royal Soc Interface • J Biomech Eng-Trans ASME • J Orthop Res • J App Physiology • Med Sci Sports & Exercise • Scand J Med Sci Sports • Sports Med • IEEE Trans Biomed Eng • IEEE Trans Med Imaging • Human Movement Sci • Europ J App Physiology • J Orthop Trauma • Gait & Posture • Int J Sports Med • Clinic Biomech • J Electromyography Kinesiology • Med Eng Phys • J Eng Med (Proc IMechE H) • PLOS ONE • J Med Bio Eng • J Sports Eng Tech (Proc IMechE P) • Int J Solids Struct • J Mech Med Biology • J Bio Phys • Computers Bio Med • J Phys D: App Phys • Int J Plasticity • Front Bioeng Biotech • Int J Mech Sci • Materials • Metallur Mater Trans A • Smart Mater Struct • Mater Sci Eng A • J Manufac Sci Eng- Trans ASME • App Surface Sci • Mater & Des • Measurement Sci & Tech • J Mater Eng Perform • Sci Tech Weld Join • Energy • J Mater Proc Tech • Int J Mater Manufac – Trans SAE • J Mech Sci Tech • Int J Heat Mass Trans • J Eng Manufac (Proc IMechE B) • J Res Practice • J Test Eval (ASTM) • Sci World J • Int J Mater Forming • Procedia Eng

Conferences • Photomechanics 2015, May 27-29, Delft, The Netherlands. • Amer Soc Biomech Ann Meet (ASB 2013), Sep 4-7, Omaha, NE, US. • ASME Des Med Devices Conf 2013, April 8-13, Minneapolis, US. • 20th Ann Meet Europ Orthop Res Soc (EORS 2012), Sep 26-28, Amsterdam, The

Netherlands.

4

• 15th Int Conf Advan Mater Proc Tech, 2012 (AMPT2012), Sep 23-26, Wollongong, Australia. • First Int Symp on Digital Human Modelling, June 14-16, 2011, Lyon, France. • Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction

(PRES 2008), Aug 24-28, Prague, Czech Republic. • ASME Power 2007 Conf, July 17-19, 2007, San Antonio, Texas, US. • Int Symp Biomed Eng, 8-10 Nov 2006, Bangkok, Thailand. • Int Conf Power, Energy, and App (PEA 2006), Sep 11-13, 2006, Gaborone, Botswana,

Yugoslavia. • 28th Ann Conf Cogn Sci Soc (CogSci 2006), July 26-29, 2006, Vancouver, Canada. • ASME Power 2006 Conf, May 2-4, 2006, Atlanta, Georgia, US. • ACM Conf on Human Factors in Comput Sys (CHI 2006), Apr 22-23. 2006, Montréal,

Québec, Canada. • Canadian Student Conf Biomed Comput, Mar 17-19, 2006, Queen’s University, Ontario,

Canada. • 14th Cong World Feder Occup Therap, July 23-28, 2006, Sydney, Australia.

Organizationofmeetings• International Advisory Committe, Biann Int Conf Exper Solid Mech (X-Mech-2016), 16-17 Feb

2014, Tehran, Iran. • Organizing committee, Int Conf on Full-Field Measurement Techniques and their Applications

in Experimental Solid Mechanics (PhotoMechanics 2015), Delft, the Netherlands. • Tissue models for organ mechanics: a mini-symposium organized within 7th World Congress of

Biomechanics, Boston, US, 6-11 July 2014, Co-organizers: Pasquale Vena and Enrico Dall’ara. • Computational mechanics of cells, tissues, and biomaterials, a mini-symposium organized within

5th. Euro Conf Comput Mech (ECCM V), 20-25 July 2014, Barcelona, Spain, Co-organizers: Pasquale Vena, Fred Vermolen, Hanna Isaksson, and Liesbet Geris.

• Program committee member, Int Conf on Exper Solid Mech (X-Mech-2014), 18-19 Feb 2014, Tehran, Iran.

• Highly porous metallic implants and bone substitutes, a symposium organized within the 8th Triennial Meet Comb Orthop Res Soc (CORS 2013), 13-16 Oct 2013, Venice, Italy.

• Computational mechanics of cells, tissues, and biomaterials, a mini-symposium organized within 6th Euro Cong Comput Meth App Sci Eng (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria. Co-organizer: H. Weinans.

Keynote/invited/perspectivelecturesInternational events

• 22nd Cong Eur Soc Biomech (ESB 2016), July 10-13, 2016, Lyon, France. • 6th Int Conf Mech Biomater Tissues, 8 Dec 2015, Waikoloa, Hawaii, USA. • EPFL Research Day on Translational Musculoskeletal Biomechanics, 19 June 2015, Lausanne,

Switzerland. • Photomechanics 2015, 29 May 2015, Delft, The Netherlands. • Utrecht Summer School on 3D Printing and Biofabrication, June 2015, Utrecht, The

Netherlands. • Footwear Biomech Symp, World Cong Biomech (WCB 2014), 6-11 July 2014, Boston, US. • Organ Biomechanics Track, World Cong Biomech (WCB 2014), 6-11 July 2014, Boston, US. • Dept Mech Eng, Northeastern Univ, 8 Apr 2014, Boston, US. • Dept Biomed Eng, New Jersey Inst Tech, 25 Feb 2014, Newark, US. • Dept Bioeng, Imperial College London, 3 Feb 2014, London, UK. • Institute for Biomechanics, ETH Zurich, 22 May 2013, Zurich, Switzerland. • Patient-specific modeling and analysis of joint reconstructions, a workshop organized as a part

of 20th Ann Meet of Europ Orthop Res Soc (EORS 2012), 26-28 Sep, Amsterdam, The Netherlands, Organizer: Markus O. Heller.

• Institute of Forming Technology and Lightweight Construction, Dortmund Univ Tech, Dortmund, Germany.

5

National events (selected from recent events) • HighTechCafé, HighTechCentreDelft, 25 Jan 2016, Delft. • Master tour of the student association Salus, Feb 2016, VU University, Amsterdam. • Symposium OK Reinier de Graaf Groep, Reinier de Graaf Hospital, 19 May 2016, Delft. • Tech for Health Exhib Cong, 6 Oct 2015, Den Bosch. • Medical Delta 3D Cafe, 12 Feb 2015, Delft. • Biocompatible Materials event, LURIS Tech Talk, 1 Oct 2015, Leiden.

Chairedsessions• Session: Metallic biomaterials, Metals in Biomedical Applications, 6th Int Conf Mech Biomater

Tissues, 7 Dec 2015, Waikoloa, Hawaii, USA. • Session: Biomedical and Natural Materials, Photomechanics 2015, 29 May 2015, Delft, The

Netherlands. • Session: Bone Mechanics, 7th World Cong Biomech (WCB 2014), July 6-11, Boston, US. • Session: Vascular mechanics, 7th World Cong Biomech (WCB 2014), July 6-11, Boston, US. • Session: Computational mechanics of cells, tissues, and biomaterials, 5th. Euro Conf Comput

Mech (ECCM V), July 20-25, 2014, Barcelona, Spain. • Session: Biomechanics 2, 20th Ann Meet Euro Orthop Res Soc (EORS 2012), Sep 26-28,

Amsterdam, The Netherlands. • Session: Implant Biomechanics IV, 18th Cong Euro Soc Biomech (ESB2012), July 1-4, Lisbon,

Portugal. • Session: 3D motion analysis-ground reaction force, Cong Int Soc Biomech (ISB 2011), 3-7 July,

Brussels, Belgium. • Session: Bone and cartilage, 3rd Dutch Bio-Medical Engineering Conference, 20-21st January,

2011, Egmond aan Zee, The Netherlands.

Membership• ASME (Amer Soc Mech Eng) • ESB (Europ Soc Biomech) • Int Foot Ankle Biomech Community

• TMS (Minerals, Metals, and Materials Soc) • Int Osteoporosis Found • Footwear Biomech Group

Teachingqualification

• University Teaching Qualification (Basiskwalificatie Onderwijs), valid for all Dutch universities.

Teachingexperience

Postgraduate • Responsible instructor and course developer, Computational Mechanics of

Tissues and Cells, TUDelft. 2011-present

• Responsible instructor and course developer, Tissue Engineering, TUDelft. 2012-present

• Responsible instructor and course developer, Selected Topics in Tissue Biomechanics and Implants, TUDelft.

2010-present

• Co-instructor and course co-developer, Experimental Design, Statistics and the Human, TUDelft.

2013-present

• Responsible instructor, Sheet Metal Forming, TUDelft. 2009

• Guest lecturer, Orthopaedic Implants and Technology, TUDelft. 2010-2015

• Guest lecturer, Digital Manufacturing, TU Delft. 2016

• Guest lecturer, Sheet Metal Forming, TUDelft. 2007-2008

Undergraduate

• Responsible co-instructor and course co-designer, Musculoskeletal System and Biomechanics 2 (Spierskeletsysteem en Biomechanica 2), TUDelft

2015-present

• Co-instructor, Biomechanics, BSc Minor: Medical Technology, TUDelft. 2010-2012

• Responsible instructor, Industrial Corrosion Eng, Shahid Abbaspour’s Univ (Kerman, Iran).

2005

Teaching assistantships

• Graduate Teaching Assistant, Mechanical Vibrations, Dept Biomed Eng, 2005

6

Amirkabir Univ Tech. • Teaching Assistant, Design of Machine Elements II, Dept Mech Eng, Iran Univ

Tech. 2003

Professional training courses

• Responsible instructor, training courses of “Technical computing using MATLAB”, Dept Chem Eng, Iran Univ Sci Tech.

2003

• Responsible instructor, training courses of “Air conditioning system design using computers” for practicing engineers, several institutions

2002-2005

Currentlabmembers

Postdocs • Saber Amin Yavari, Anti-microbial surfaces for additively manufactured

porous biomaterials. 2014-present

Doctoral students • Françoise Bobbert, Origami-based meta-biomaterials 2016-present

• Yageng Li, Additively manufactured biodegradable metallic bone substitutes 2016-present

• Juan Sebastián Cuéllar, Accessible prosthetics through 3D printing and a smartphone app.

2016-present

• Nazli Sarkalkan, Cartilage defect detection using ultrasound techniques. 2013-present

• Shahram Janbaz, Buckling and wrinkling: biofabrication using extreme mechanics.

2013-present

• Behdad Pouran, Physical properties of cartilage and bone in healthy and diseased joints.

2013-present

• Mohammad Ahmadi, Mechanical properties of porous bioinert/biodegradable biomaterials.

2013-present

• Parisa Rahnama Moshtagh, Cartilage regeneration and characterization. 2012-present

• Vahid Arbabi, Etiology of osteoarthritis: application of patient-specific finite element models.

2012-present

Visiting PhD students

• Reza Hedayati, Computational and analytical approaches for analysis of the mechanical properties of additively manufactured porous biomaterials

2015-present

MSc students

• Dominique Fuchs, Modifying mechanical properties of peri-prosthetic fibrous membrane using biochemical factors- an exploratory study

2015-present

• Sander Dobbenga, Nanotopography-based regulation of stem cell date 2015-present

• Coline Hammann, Nano-patterning of titanium using electron beam nano-lithography

2015-present

• Ingmar van Hengel, Evaluation of anti-bacterial coatings for additively manufactured porous titanium using animal models and in vitro assays

2015-present

• Suvra Nath, Induced differentiation of mouse embryonic stem cells into cerebellar neurons

2015-present

• Jochem Brandt, Patient-specific knee-sparing tumor endoprostheses for the distal femur

2015-present

• Matthijs Heeres, Origami-based biomaterials and their mechanical behavior 2014-present

• Yoeri Sigterman, Mechanical behavior of additively manufactured structures and materials (in collaboration with Stuttgart University).

2014-present

• Chara Andriakopoulou, Dynamic mechanical characterization of hydrogels and cartilage (in collaboration with University of Strathclyde).

2014-present

Labalumni

Doctoral students • Gianni Campoli, Computational bone mechanics: the interrelationships

between shape, density distribution, and loading, Graduated on 20 May 2014. 2010-2014

• Saber Amin-Yavari, Porous titanium for bone substitution: mechanobiology 2011-2014

7

meets surface science, Graduated on 29 April 2014.

Visiting doctoral students

• Zahra Gorgin, Anti-microbial surfaces for additively manufactured porous biomaterials based on plasma electrolytic oxidation.

2015

• Sami Väänänen, from Univ Eastern Finland, Mechanical testing of the femur accompanied with 3D full-field strain measurement using digital image correlation.

2010-2012 (two visits)

• Lorenzo Grassi, from Lund Univ, Measurement of full-field strain distribution during fracture testing of cadaveric femora.

2012

Postdocs/researchers

• Saber Amin-Yavari, Effects of nanotopography on cell response in additively manufactured porous biomaterials

2014

• Gianni Campoli, finite element modeling of the implanted shoulder joint 2014 • Martina Cuschieri, Hydrogels for cartilage tissue engineering. 2012-2013

MSc students

• Joep de Krijger, The effect of stress ratio on the fatigue behavior of additively manufactured porous biomaterials.

2015-2016

• Gerhard van Wolfswinkel, Inducible displacement of a knee implant - a finite element study and validation of a loose and fixed tibial component

2014-2016

• Françoise Bobbert, Permeability and mechanical properties of triply periodic minimal surface scaffolds for bone regeneration.

2014-2016

• Astrid Moerman, Histological and mechanical characterization of interface tissue between bone and loose orthopedic prostheses.

2014-2015

• Joaquin V.V. Jorgge, Effect of bath condition on the diffusion of contrast agents across articular cartilage.

2013-2014

• Asimina Glynou, Design of a mechanical loading device for studying the load-dependent transport of solutes across articular cartilage in a micro-CT chamber.

2013-2014

• Axel Scheele, Can peak stresses in patient specific finite element models of total knee prostheses predict tibial component migration measured by radiostereometric analysis?

2013-2014

• Paolo Sànchez, Microstructural model of the collagen fibril using finite element method.

2013

• Josip Rauker, Measuring Young’s modulus of 20LP10L20-LLA40 microspheres and gelatin-methacrylamide (GelMA) hydrogels using nano-indentation.

2012-2013

• Nazli Sarkalkan, Statistical appearance models for fast and automated estimation of proximal femur fracture risk using finite element models.

2012-2013

• Pauline Roels, Understanding the development of cam-type deformity by FE analysis of the immature proximal femur.

2011-2013

• Sven van den Munckhof, Subject-specific femoral fracture prediction by finite element modeling.

2011-2013

• Magaly Reyes Lua, Prediction of the elastic strain limit of tendons. 2011-2012

• Sophie Borleffs, Finite element modeling to predict bulk mechanical properties of metal foams produced by 3d printing.

2011-2012

• Sander Poelert, Thermal fluctuations of anisotropic semiflexible polymers. 2010-2011

Visiting MSc students

• Suzan Bsat, Effect of alkali-acid-heat chemical surface treatment on electron beam melted porous titanium and its apatite forming ability (visiting student from Carleton University, Canada)

2014

• Alessandro Antico, exchange student, Univ Bologna (Italy), Computer aided design and finite element modeling to predict bulk mechanical properties of bone scaffolds using triply periodic minimal surfaces.

2013

8

BSc students • M.M. Ackermans, T.N.J. Geelen, C.J. van der Ploeg, L. van Roessel, The effects

of thermal cycles on the mechanical behaviour of high performance materials. 2015-2016

• Dennis van der Geest, Vincent van der Knaap, Thijs van Winden, and Yvo Putter, Correlation between ultrasound wave response and cartilage damage

2014-2015

• Peter Jamar, Steven Deen, Michel Tamarzians, Frederike Geesink, Optimal design parameters for detection of cartilage damage with ultrasound. Co-supervised with Dr. Gabrielle Tuijthof.

2013-2014

• Bob Schouten, Elias Dahlgren, Timothy Jessurun, Mohamed Boumzaouad, determining the environmental factors that influence the detection of cartilage damage with ultrasound. Co-supervised with Dr. Gabrielle Tuijthof.

2013-2014

• Ana Rita Soares, exchange student from University of Lisbon, Biofabrication of hydrogels for cartilage tissue engineering and mechanical characterization of the fabricated hydrogels.

2013

• Jeroen Kremer, Jos Vroon, Arjan Scheerhoorn, Arnoud Delissen, Finite element modeling of large deformation of fatty tissue in an eye model. Co-supervised with Prof. Huib Simonsz and Prof. Fred van Keulen.

2012-2013

• Bjorn Vennema, Giovanni Mores, Jan Wessels, Teun Koomen, Application of computational ultrasound for detection of small cartilage lesions in the ankle joint. Co-supervised with Dr. Gabrielle Tuijthof.

2012

• Wouter Roobeek, Elise Buiter, Goof van de Weg, Thijs Bosma, Determination of the smallest size of osteochondral defects that can be detected using ultrasound. Co-supervised with Dr. Gabrielle Tuijthof. The project won the prize for the best BSc project of TU Delft and was awarded a shared grant of 2 kEuro.

2011

Visiting BSc students • Siobhan Rigby, from MIT, Micro-mechanical properties of peri-prosthetic

fibrous membrane. 2015

PhDexamcommittees• Eva Urquia Edreira, PhD, Calcium phosphate ceramics for bone regeneration,

Radboud University, Nijmegen, The Netherlands 2016

• Johan van der Stok, PhD, Erasmus Medical Center, Rotterdam, The Netherlands. 2015

• Mohamad S Ghahfarokhi, PhD, Experimental and numerical characterization of native bone tissue and glass ceramic bone scaffold at small scale, Politecnico di Milano.

2014

MScexamcommittees• M.F. Knol, “Thermal modelling of Selective Laser Melting: a semi-analytical

approach”, Faculty Mech, Marit, & Mater Eng, TUDelft. 2016

• Dennis Rombout, “Design of a power-assistance system for body-powered hand-prostheses”, Faculty Mech, Marit, & Mater Eng, TUDelft.

2016

• Ferdinand Peters, Realizing a small UAV for medical transport in developing countries, Faculty Mech, Marit, & Mater Eng, TUDelft.

2014

• Seval Edip, Effect of Hypoxia on Transforming Growth Factor-β signaling Pathway in Osteoarthritic Human Cartilage, Faculty Mech, Marit, & Mater Eng, TUDelft.

2013

• Erik Simons, Simulation of strain localization with an enriched gradient-enhanced damage model, Faculty Civil Eng, TU Delft.

2013

• Tim de Ruig, Tailor made flanged parts for the aircraft industry, Faculty Aerosp Eng, TUDelft.

2013

• H.A. Bosch, Finite element analysis of a kite for power generation, Faculty Mech, Marit, & Mater Eng, TUDelft.

2012

Universityservice• Coordinator, MSc program: Tissue Biomechanics and Implants, Dept Biomech

Eng, Faculty Mech, Marit, & Mater Eng, TUDelft. 2010-present

• Committee Member, Education Board, Biomed Eng Program, TUDelft. 2010-present

9

• Member, High Perform Comput (HPC) committee, representing the Biomech Eng Dept.

2011-present

Publicationandcitationstatistics• H-index: 25 (Web of Science) • Publications indexed in Web of Science: 105. • First or last author: >80% (86/105). • ResearcherID profile: http://www.researcherid.com/rid/A-8510-2008

Publications Edited volumes/special issues

• Zadpoor, AA, Malda, J (Editors), 2016, "Additively Manufactured and 3D printed Biomaterials", special issue of the Annals of Biomedical Engineering, in progress.

• Zadpoor, AA, Taylor, D (Editors), 2016, "Mechanics of Additively Manufactured Biomaterials and Implants", special issue of the Journal of the Mechanical Behavior of Biomedical Materials, in progress.

• Zadpoor, AA (Editor), 2016, “Biomaterials and Tissue Biomechanics”, special issue of Materials, in progress.

• Weinans, H, Zadpoor, AA (Editors), 2016, "Metallic Biomaterials", special issue of Metals, in progress.

• Vena, P, Zadpoor, AA (Editors), 2015, “Multi-scale Biomechanics”, special issue of the J Biomech Eng- Transac ASME.

• Zadpoor, AA (Editor), 2015, “Mechanics of Biomaterials”, special issue of Materials.

Contributions to books • Zadpoor, AA, Sinke, J, Benedictus, R, 2011, “Numerical modeling of TWB forming”, in Tailor

Welded Blanks for Advanced Manufacturing, Edited by Kinsey, B. L. and Wu, X., Woodhead Pub Ltd, Cambridge, UK, pp 68-94, ISBN 1-84569-704-9.

• Sinke, J, Zadpoor, AA, Benedictus, R, 2011, “Tailor-made blanks for the aerospace industry”, in Tailor Welded Blanks for Advanced Manufacturing, Edited by Kinsey, B. L. and Wu, X., Woodhead Pub Ltd, Cambridge, UK, pp 181-201, ISBN 1-84569-704-9.

• Zadpoor, AA, Sinke, J, 2010, “Weld metal ductility and its influence on the formability of tailor-welded blanks”, in Failure Mechanisms for Advanced Welding Processes, Edited by Sun, X., Woodhead Pub Ltd, Cambridge, UK, pp 258-288, ISBN 1-84569-536-4.

Journals Submitted/ready for submission

• Tümer, N, Blankevoort, L, van de Giessen, M, Terra, MP, de Jong, PA, Weinan, H, Tuijthof, GJM, Zadpoor, AA, 2016, “Bone shape difference between control and osteochondral defect incidence groups of the ankle joint”, Osteoarthritis & Cartilage, revised version under review.

• Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Combined inverse-forward artificial neural networks for fast and accurate estimation of the diffusion coefficients of cartilage based on multi-physics models”, J Biomech, minor revisions requested.

• Pouran, B, Arbabi, V, Villamar, JA, Baka, N, Zadpoor, AA, Weinans, H, 2016, “Isolated effects of external bath osmolality, solute concentration, and electrical charge on solute transport across articular cartilage”, Med Eng Phys, under review.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells”, App Math Model, under review.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Mechanical properties of additively manufactured thick honeycombs”, Materials, under review.

• Amin Yavari, S, Loozen, L, Paganelli, F, Bakhshandeh2, S, Lietaert, K, Fluit, AC, Boel, CHE, Alblas, J, Vogely, CH, Weinans, H, Zadpoor, AA, 2016, “Bactericidal behavior of additively manufactured porous titanium with nanotubular surfaces releasing silver ions”, ACS Applied Materials & Interfaces, revised verison under review.

• Zadpoor, AA, Hedayati, R, 2016, “Analytical relationships for prediction of the mechanical

10

properties of additively manufactured porous biomaterials”, J Biomed Mater Res A, under review.

• De Krijger, J, Rans, C, Van Hooreweder, B, Lietaert, K, Pouran, B, Zadpoor, AA, 2016, “Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials”, J Mech Behav Biomed Mater, revisions requested.

• Pouran, B, Arbabi, V, Weinans, H, Zadpoor, AA, , 2016, “Application of multiphysics models to efficient design of experiments of solute transport across articular cartilage”, Comp Method Biomech Biomed Eng, under review.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Mechanical properties of additively manufactured octagonal honeycombs”, Mater Sci Eng C, revisions requested.

• Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Neutral solute transport across osteochondral interface: a finite element approach”, J Biomech, under review.

• Pouran, B, Arbabi, V, Zadpoor, AA, Weinans, H, 2016, “Solute transport at the interface of cartilage and subchondral bone plate: effect of micro-architecture”, J Orthop Res, under review.

• Zadpoor, AA, 2016, “Origami-based materials and structures”, NPG Asia Mater, under review. • Moshtagh, PR, Pouran, B, Korthagen, NM, Zadpoor, AA, Weinans, H, 2016, “An optimized

indentation protocol for measurement of cartilage stiffness: the effects of spatial variation and indentation parameters”, J Biomech, under review.

• Camargo, WA, Hoekstra, JWM, Alghamdi, HS, Zadpoor, AA, Amin Yavari, S, Jansen, JA, van den Beucken, JJJP, 2016, “Preliminary data on bone responses to surface porous titanium bone implants”, Clin Oral Implants Res, to be submitted.

Accepted/in press • Zadpoor, AA, 2016, “Mechanical meta-materials”, Materials Horizons, in press. • Moerman, A, Zadpoor, AA, Oostlander, A, Schoeman, M, Rahnamay Moshtagh, P, Pouran, B,

Valstar, E, 2016, “Structural and mechanical characterization of the peri-prosthetic fibrous membrane in loosened hip prostheses: an explorative study”, J Mech Behav Biomed Mater, in press.

2016 • Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, "Mechanics of additively

manufactured porous biomaterials based on the rhombicuboctahedron unit cell”, J Mech Behav Biomed Mater, vol 53, pp 272-294.

• Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Multiphasic modeling of charged solute transport across articular cartilage: application of finite-bath model”, J Biomech, vol 49, pp 1510-1517.

• Janbaz, S, Weinans, H, Zadpoor, AA, 2016, “Geometry-based control of instability patterns in cellular soft matter”, RSC Advances, vol 6, pp 20431–20436.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Hosseini Toudeshki, H, Zadpoor, AA, 2015, “Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials”, Int J Fatigue, vol 84, pp 67-79.

• Moshtagh, PR, Pouran, B, Van Tiel, J, Rauker, J, Zuiddam, MR, Dirned, FWA, Arbabi, V, Korthagen, N, Weinans, H, Zadpoor, AA, 2016, “Micro- and nano-mechanics of osteoarthritic cartilage: the effects of tonicity and disease severity”, J Mech Behav Biomed Mater, vol 59, pp 561-571.

• Arbabi, V, Pouran, B, Campoli, G, Weinans, H, Zadpoor, AA, 2016, “Determination of the mechanical and physical properties of cartilage by coupling poroelastic-based finite element models of indentation with artificial neural networks”, J Biomech, vol 49, pp 631-637.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: analytical solutions and computational models”, Mater Sci Eng C, vol 60, pp 163-183.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials”, Mater Des, vol 89, pp 9-20.

• Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2015, “Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells”, Int J Mech Sci, vol 38, pp 19-38.

11

2015 • Zadpoor, AA, 2015, “Etiology of femoroacetabular impingement in athletes: a review of recent

findings”, Sports Med, vol 45, pp 1097–1106. • Zadpoor, AA, 2015, Bone tissue regeneration: the role of scaffold geometry, Biomater Sci, vol

3, pp 231-245. • Amin Yavari, S, Ahmadi, SM, Wauthle, R, Pouran, B, Schrooten, J, Weinans, H, Zadpoor, AA,

2015, “Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials”, J Mech Behav Biomed Mater, vol 43, pp 91-100.

o Among the Top 25 Hottest Articles of the journal (Jan-Mar 2015, Apr-Jun 2015). • Van der Stok, J, Koolen, MKE, de Maat, MPM, Amin Yavari, S, Alblas, J, Patka, P, Verhaar,

JAN, van Lieshout, EMM, Zadpoor, AA, Weinans, H, Jahr, H, 2015, “Full regeneration of segmental bone defects using porous titanium implants loaded with BMP-2 containing fibrin gels”, Europ Cells & Mater, vol 29, pp 141-154.

• Wauthle, R, Van der Stok, J, Amin Yavari, S, Van Humbeeck, J, Kruth, JP, Zadpoor, AA, Weinans, H, Mulier, M, Schrooten, J, 2015, “Additively manufactured porous tantalum implants”, Acta Biomater, vol 14, pp 217-225.

• Van der Stok, J, Lozano, D, Chin Chai, Y, Amin Yavari, S, Bastidas Coral, AP, Verhaar, JAN, Gómes-Barrera, E, Schrooten, J, Jahr, H, Zadpoor, AA, Esbrit, P, Weinans, H, 2015, “Osteostatin-coated porous titanium implants can improve early bone regeneration in cortical bone defects in rats”, Tissue Eng, vol 21, pp 1495-1506.

• Kadkhodapour, J, Montazerian, H, Darabi, AC, Ahmadi, SM, Zadpoor, AA, Schmauder, S, 2015, “Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell”, J Mech Behav Biomed Mater, vol 50, pp 180-191.

o Among the Top 25 Hottest Articles of the journal (Jul-Sep 2015, Oct-Dec 2015). • Amin Yavari, S, Chai, YC, Wauthle, R, Schrooten, J, Weinans, H, Zadpoor, AA, 2015, “Effects

of anodizing parameters and heat treatment on nanotopographical features, bioactivity, and cell culture response of additively manufactured porous titanium”, Mater Sci Eng C, vol 51, pp 132-138.

• Zadpoor, AA, 2015, “Nanomechanical characterization of heterogeneous and hierarchical biomaterials and tissues using nanoindentation: the role of finite mixture models”, Mater Sci Eng C, vol 48, pp 150-157.

• Wauthle, R, Ahmadi, SM, Amin Yavari, S, Mulier, M, Zadpoor, AA, Weinans H, Van Humbeeck, J, Kruth, J-P, Schrooten, J, 2015, "Revival of pure titanium for dynamically loaded porous implants using additive manufacturing", Mater Sci Eng C, vol 54, pp 94-100.

o Among the Top 25 Hottest Articles of the journal (Apr-Jun 2015). • Zadpoor, AA, Weinans, H, 2015, “Patient-specific bone modeling and analysis: the role of

integration and automation in clinical adoption”, J Biomech, vol 48, pp 750-760. • Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2015, “Transport of neutral solutes across

articular cartilage: the role of zonal diffusivities”, J Biomech Eng-Trans ASME, vol 137, 071001.

• Vena, P, Zadpoor, AA, 2015, “Multiscale biomechanics”, J Biomech Eng- Trans ASME, vol 137, 070201.

• Ahmadi, SM, Amin Yavari, S, Wauthle, R, Pouran, B, Schrooten, J, Weinans, H, Zadpoor, AA, 2015, “Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties”, Materials, vol 8, pp 1871-1896.

• Bsat, S, Amin Yavari, S, Munsch, M, Valstar, ER, Zadpoor, AA, 2015, “Effect of alkali-acid-heat chemical surface treatment on electron beam melted porous titanium and its apatite forming ability”, Materials, vol 8, pp 1612-1625.

• Zadpoor, AA, 2015, “Mechanics of biological tissues and biomaterials: current trends”, Materials, vol 8, pp 4505-4511.

• Sarkalkan, N, Loeve, AJ, Van Dongen, KWA, Tuijthof, GJM, Zadpoor, AA, 2015, "Ultrasound techniques for detection of osteochondral defects in the ankle joint: a parametric and feasibility study", Sensors, vol 15(1), pp 148-165.

• Zadpoor, AA, Valstar, ER, 2015, “The sense of biomechanical studies in orthopaedics: a discussion on a recent study published in Injury”, Injury, vol 46, pp 2078-2079.

• Van den Munckhof, S, Nikooyan, AA, Zadpoor, AA, 2015, “Assessment of osteoporotic femoral

12

fracture risk: finite element method as a potential replacement for current clinical techniques”, J Mech Med Bio, vol 15(3), 1530003, 30 pages.

2014 • Amin Yavari, S, Van der Stok, J, Chai, YC,Wauthle, R, Tahmasebi Birgani, Z, Habibovic, P,

Mulier, M, Schrooten, J, Weinans, H, Zadpoor, AA, 2014, “Bone regeneration performance of surface treated porous titanium”, Biomaterials, vol 35, pp 6172-6181.

• Roels, P, Agricola, R, Oei, E, Weinans, H, Campoli, G, Zadpoor, AA, 2014, “Mechanical factors explain development of cam-type deformity”, Osteoarthritis & Cartilage, vol 22, pp 2074-2082.

• Campoli, G, Bolsterlee, B, Van der Helm, FCT, Weinans, H, Zadpoor, AA, 2014, “Effects of densitometry, material mapping, and load estimation uncertainties on the accuracy of patient-specific finite element models of the scapula”, J Royal Soc: Interface, vol 11 (93), 20131146.

• Agricola, R, Heijboer, MP, Ginai, AZ, Roels, P, Zadpoor, AA, Verhaar, JAN, Weinans, H, Waarsing, JH, 2014, “Cam deformity is gradually and exclusively acquired during skeletal maturation: a prospective study with a minimum of 2 years follow-up”, Amer J Sports Med, vol 42, pp 798-806.

• Sarkalkan, N, Weinans, H, Zadpoor, AA, 2014, “Statistical shape and appearance models of bones”, Bone, vol 60, pp 129–140.

o Among the Top 25 Hottest Articles of the journal (Jan-Mar 2014). • Amin Yavari, S, Ahmadi, SM, Van der Stok, J, Wauthle, R, Riemslag, AC, Janssen, M,

Schrooten, J, Weinans, H, Zadpoor, AA, 2014, “Effects of bio-functionalizing surface treatments on the mechanical behavior of porous titanium implants”, J Mech Behav Biomed Mater, vol 36, pp 109-119.

o Among the Top 25 Hottest Articles of the journal (Apr-Jun 2014, Jul-Sep 2014). • Moshtagh, PR, Rauker, J, Sandker, MJ, Zuiddam, MR, Dirne FWA, Klijnstra, E, Duque, L,

Steendam R, Weinans, H, Zadpoor, AA, 2014, “Nanomechanical properties of multi-block copolymer microspheres for drug delivery applications”, J Mech Behav Biomed Mater, vol 34, pp 313-319.

• Ahmadi, SM, Campoli, G, Amin Yavari, S, Sajadi, B, Wauthle, R, Schrooten, J, Weinans, H, Zadpoor, AA, 2014, “Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells”, J Mech Behav Biomed Mater, vol 34, pp 106-115.

o Among the Top 25 Hottest Articles of the journal (Oct-Dec 2014, Jan-Mar 2014, Apr-Jun 2014). • Reyes, AM, Jahr, H, van Schie, HTM, Weinans, H, Zadpoor, AA, 2014, “Prediction of the elastic

strain limit of tendons”, J Mech Behav Biomed Mater, vol 30, pp 324-338. • Kraaij, G, Zadpoor, AA, Tuijthof, G, Dankelman, J, Nelisse, RGHH, Valstar, E, 2014,

“Mechanical properties of human bone-implant interface tissue in aseptically loose hip implants”, J Mech Behav Biomed Mater, vol 38, pp 59-68.

o Among the Top 25 Hottest Articles of the journal (Jul-Sep 2014). • Sarkalkan, N, Waarsing, JH, Bos, PK, Weinans, H, Zadpoor, AA, 2014, “Statistical shape and

appearance models for fast and automated estimation of proximal femur fracture load using 2D finite element models”, J Biomech, vol 47 (12), pp 3107–3114.

• Amin Yavari, S, Ahmadi, SM, Van der Stok, J, Wauthle, R, Schrooten, J, Weinans, H, Zadpoor, AA, 2014, “Mechanical analysis of a rodent segmental bone defect model: the effects of surgical variability and implant stiffness on load transfer”, J Biomech, vol 47, pp 2700-2708.

• Campoli, G, Baka, N, Kaptein, BL, Zachow, S, Valstar, ER, Weinans, H, Zadpoor, AA, 2014, “Relationship between the shape and density distribution of the femur and its natural frequencies of vibration”, J Biomech, vol 47, pp 3334-3343.

• Grassi, L, Väänänen, SP, Amin Yavari, S, Jurvelin, J, Weinans, H, Ristinmaa, M, Zadpoor, AA, Isaksson, H, 2014, “Full-field strain measurement during mechanical testing of the human femur at physiologically relevant strain rates”, J Biomech Eng- Trans ASME, vol 136, 111010, 1-8.

• Van den Munckhof, S, Zadpoor, AA, 2014, “How accurately can we predict femoral fracture loads using finite element models?”, Clinical Biomech, vol 29, pp 373-380.

• Amin Yavari, S, Wauthle, R, Bottger, A, Schrooten, J, Weinans, H, Zadpoor, AA, 2014, “Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting”, App Surface Sci, vol 290, pp

13

287–294. • Zadpoor, AA, 2014, “Relationship between in vitro apatite-forming ability measured using

simulated body fluid and in vivo bioactivity of biomaterials”, Mater Sci Eng C, vol 35, pp 134-143.

• Bolsterlee, B, Zadpoor, AA (joint first author), 2014, “Transformation methods for estimation of subject-specific scapular muscle attachment sites”, Comp Method Biomech Biomed Eng, vol 17, pp 1492-1501.

• Rauker, J, Moshtagh, PR, Weinans, H, Zadpoor, AA, 2014, “Analytical relationships for nanoindentation-based estimation of mechanical properties of biomaterials”, J Mech Med Biol, vol 14, 1430004, 44 pages.

• De Winter, JCF, Zadpoor, AA, Dodou, D, 2014, “The expansion of Google Scholar versus Web of Science: a longitudinal study”, Scientometrics, vol 98, pp 1547-1565.

2013 • Zadpoor, AA, 2013, “The evolution of biomaterials research”, Mater Today, vol 16 (11), pp

408-409. • Van der Stok, J, Wang. H, Amin Yavari, S, Siebelt, M, Sandker, M, Waarsing, JH, Jahr, H,

Zadpoor, AA, Leeuwenburgh, SCG, Weinans, H, 2013, “Enhanced regeneration of segmental bone defects using porous titanium scaffolds loaded with nanostructured colloidal gelatin gels for time and dose controlled dual growth factor delivery”, Tissue Eng Part A, vol 19, pp 2605-2614.

• Campoli, G, Weinans, H. Van der Helm, FCT, Zadpoor, AA, 2013, “Subject-specific modeling of the scapula bone tissue adaptation”, J Biomech, vol 46, pp 2434-2441.

• Amin Yavari, S, Wauthle, R, Riemslag, AC, Janssen, M, Schrooten, J, Weinans, H, Zadpoor, AA, 2013, “Fatigue behavior of porous titanium biomaterials manufactured using selective laser melting”, Mater Sci Eng C, vol 33(8), pp 4849–4858.

• Zadpoor, AA, 2013, “Open forward and inverse problems in theoretical modeling of bone tissue adaptation”, J Mech Behav Biomed Mater, vol 27, pp 249-261.

• Väänänen, SP, Amin Yavari, S, Weinans, H, Zadpoor, AA, Jurvelin, JS, Isaksson, H, 2013, “Repeatability of digital image correlation for measurement of surface strains in composite long bones”, J Biomech, vol 46, pp 1928-1932.

• Amin Yavari, S, Van der Stok, J, Weinans, H, Zadpoor, AA, 2013, “Full-field strain measurement and fracture analysis of rat femora in compression test”, J Biomech, vol 46, pp 1282-1292.

• Van der Stok, J, Van der Jagt, OP, Amin Yavari, S, De Haas, MFP, Waarsing, JH, Jahr, H, van Lieshout, EMM, Patka, P, Verhaar, JAN, Zadpoor, AA, Weinans, H, 2013, “Selective laser melting produced porous titanium scaffolds regenerate bone in critical size cortical bone defects”, J Orthop Res, vol 31, pp 792–799.

• Grassi, L, Väänänen, SP, Amin Yavari, S, Weinans, H, Jurvelin, JS, Zadpoor, AA, Isaksson, H, 2013, “Experimental validation of finite element model for proximal composite femur using optical measurements”, J Mech Behav Biomed Mater, vol 21, pp 86-94.

o Among the Top 25 Hottest Articles of the journal (Apr-Jun 2013). • Campoli, G, Borleffs, MS, Amin Yavari, S, Wauthle, R, Weinans, H, Zadpoor, AA, 2013,

“Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing”, Mater & Des, vol 49, pp 957–965.

• Zadpoor, AA, Campoli, G, Weinans, H, 2013, “Neural network identification of load from the morphology of trabecular bone”, App Math Model, vol 37(7), pp 5260-5276.

• Poelert, S, Valstar, E, Weinans, H, Zadpoor AA, 2013, “Patient-specific finite element modeling of bones”, J Eng Med, vol 227, pp 464–478.

o One of the top five most downloaded papers of the journal in the years 2013 and 2014. • Poelert, SL, Weinans, HH, Zadpoor, AA, 2013, “Finite-element modeling of the thermal

fluctuations of a single anisotropic polymer”, J Mech Med Biol, vol 13(4), 1350056, pp 1-22. 2012

• Campoli, G, Weinans, H, Zadpoor, AA, 2012, “Computational load estimation of the femur”, J Mech Behav Biomed Mater, vol 10, pp 108-119.

• Väänänen, S, Isaksson, H, Waarsing, E, Zadpoor, AA, Jurvelin, J, Weinans, H, 2012, “Estimation of rotation in femoral 2D radiographs”, J Biomech, vol 45, pp 2279-2283.

• Nikooyan, AA, Zadpoor AA (joint first author), 2011, “Effects of muscle fatigue on the ground

14

reaction force and soft tissue vibrations during running: a model study”, IEEE Trans Biomed Eng, vol 59(3), pp 797-804.

• Poelert, SL, Zadpoor, AA, 2012, “Analytical and numerical methods for capturing the thermal fluctuations of semiflexible polymers”, Macromol Theory Simul, vol 21, pp 357-371.

• Zadpoor AA, Nikooyan, AA, 2012, “The effects of lower-extremity muscle fatigue on the vertical ground reaction force: a meta-analysis”, J Eng Med, vol 226(8), pp 579 - 588.

2011 • Nikooyan, AA, Zadpoor, AA (joint first author), 2011, “An improved cost function for modeling of

muscle activity during running”, J Biomech, vol 44, pp 984-987. • Zadpoor, AA, Nikooyan, AA, 2011, “The relationship between stress fractures and the ground

reaction force: a systematic review”, Clinical Biomech, vol 26, pp 23-28. o Publicized by the journal as the most highly cited paper since 2011. o Among the Top 25 Hottest Articles of the journal (Oct-Dec 2014, Jan-Mar 2014, throughout

2013, Apr-June 2013, Jan-Mar 2013, throughout 2012, Oct-Dec 2012, Apr-June 2012, Jan-Mar 2012, throughout 2011, Oct-Dec 2011, July-Sep 2011, Apr-June 2011, Jan-Mar 2011, Oct-Dec 2010).

• Nikooyan, AA, Zadpoor AA (joint first author), 2011, “Mass-spring-damper modeling of the human body to study running and hopping: an overview”, J Eng Med, vol 225(12), pp 1121-1135.

• Zadpoor AA, Nikooyan, AA, 2011, “Publication and citation in biomechanics: a comparison with closely related fields (2003-2010)”, J Mech Med Biol, vol 11(4), pp 705-711.

• Zadpoor, AA, Campoli, G, Sinke, J, Benedictus, R, 2011, “Fracture in bending- the straining limits of monolithic sheets and machined tailor-made blanks”, Mater & Des, vol 32, pp 1229-1241.

2010 • Zadpoor, AA, Nikooyan, AA, 2010, “Modeling muscle activity to study the effects of footwear

on the impact force and vibrations of the human body during running”, J Biomech, vol 43(2), pp 186-193.

o Among the Top 25 Hottest Articles of the journal (Jan-Mar 2010). • Zadpoor, AA, Sinke, J, Benedictus, R, 2010, “Global and local mechanical properties and

microstructure of friction stir welds with dissimilar materials and/or thicknesses”, Metallur Mater Trans A, vol 41(13), pp 3365-3378.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2010, “Elastoplastic deformation of dissimilar-alloy adhesively-bonded tailor-made blanks”, Mater & Des, vol 31, pp 4611-4620.

• Sinke, J, Iacono, C, Zadpoor, AA, 2010, “Tailor made blanks for the aerospace industry”, Int J Mater Forming, vol 3(S1), pp 849– 852.

2009 • Nikooyan, AA, Zadpoor, AA (joint first author), 2009, “Application of virtual environments to

assessment of human motor learning during reaching movements”, PRESENCE, vol 18(2), pp 112-124.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “Formability prediction of high strength aluminum sheets”, Int J Plasticity, vol 25 (12), pp 2269-2297.

o Among the Top 25 Hottest Articles of the journal (July-Sep 2009, throughout academic year 2009-2010).

• Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “The mechanical behavior of adhesively bonded tailor-made blanks”, Int J Adhesion Adhesives, vol 29(5), pp 558-571.

• Among the Top 25 Hottest Articles of the journal (Apr-Jun 2009). • Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “Finite element modeling and failure prediction of

friction stir welded blanks”, Mater & Des, vol 30(5), pp 1423-1434. • Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “Bendability of machined aluminum tailor-made

blanks”, Int J Mater Forming, vol 2(S1), pp 821-824. • Zadpoor, AA, Nikooyan, AA, 2009, “Development of an improved desiccant-based evaporative

cooling system for gas turbines”, J Eng Gas Turbines Power- Trans ASME, vol 131(3), pp 034506(1-5).

• Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “Fracture mechanism of aluminium friction stir welded blanks”, Int J Mater Forming, vol 2(S1), pp 319-322.

• Among the Top 25 Hottest Articles of the journal (Jan-Mar 2009).

15

• Zadpoor, AA, Sinke, J, Benedictus, R, 2009, “The effects of thickness on the formability of 2000 and 7000 series high strength aluminum alloys”, Key Eng Mater, vol 410-411, pp 459-466.

2008

• Zadpoor, AA, Sinke, J, Benedictus, R, Pieters, R, 2008, “Mechanical properties and microstructure of friction stir welded tailor-made blanks”, Mater Sci Eng A, vol 494, pp 281-290.

o Among the Top 25 Hottest Articles of the journal (July-Sep 2008). • Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “Experimental and numerical study of machined

aluminum tailor-made blanks”, J Mater Proc Tech, vol 200, pp 289-300. • Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “The effects of friction stir welding on the

mechanical properties and microstructure of 7000 series aluminum tailor-welded blanks”, Int J Mater Forming, vol 1(S1), pp 311-314.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “Theoretical prediction of failure in forming of friction stir welded blanks”, Int J Mater Forming, vol 1(S1), pp 305-308.

2007 • Zadpoor, AA, Nikooyan, AA, Arshi, AR, 2007, “A model-based parametric study of impact force

during running”, J Biomech, vol 40(9), pp 2012-2021. • Zadpoor, AA, Sinke, J, Benedictus, R, 2007, “Mechanics of tailor-welded blanks: an overview”,

Key Eng Materials, vol 344, pp 373-382. 2006

• Zadpoor AA, Nikooyan, AA, 2006, “A mechanical model to determine the influence of masses and mass distribution on the impact force during running- a discussion”, J Biomech, vol 39(2), pp 388-390.

• Rokni Damavandi Taher, H, Omidi, M, Zadpoor, AA, Nikooyan, AA, 2006, “Free vibration of circular and annular plates with variable thickness and different combinations of boundary conditions”, J Sound and Vib, vol 296(4-5), pp 1084-1092.

• Zadpoor, AA, Golshan, AH, 2006, “Performance improvement of a gas turbine cycle by using a desiccant-based evaporative cooling system”, Energy, vol 31(14) pp 2316-2328.

• Zadpoor, AA, 2006, “Finite element method analysis of human hand arm vibrations”, Int J Sci Res, vol 16, pp 391-395.

• Zadpoor, AA, 2004, “Chaos and Nonlinear Dynamics- An Introduction for Scientists and Engineers, by Robert C. Hilborn, 2nd Edition, Oxford University Press, New York, 2000”, Nonlinear Dynamics, vol 37(2), pp 169-170.

Full-length conference papers • De Winter, JCF, Zadpoor, AA, 2011, “Effectiveness of a checklist for writing mini-papers in a

Bachelor Research Project: A preliminary study”, Ann Conf Europ Soc Eng Educ (SEFI 2011), Lisbon, Portugal.

• Zadpoor, AA, Sinke, J, 2010, “Effects of post-weld heat treatment on the mechanical properties of similar- and dissimilar-alloy friction stir welded blanks”, Adv Mater Proc Tech (AMPT 2010), Paris, AIP Conf Proc vol 1315, pp 929-934.

• Nikooyan, AA, Zadpoor, AA, 2009, “A model-based study of the muscle tuning during running with different shoes”, Proc 8th Int Symp Comp Meth Biomech Biomed Eng (CMBBE 2008), Porto, Portugal.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “Comparative study of the formability prediction models for high-strength aluminum alloys”, Proc 9th Int Conf Tech Plasticity (ICTP 2008), Gyengju, South Korea, pp 1258-1263.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “Mixed-mode analysis of delamination in adhesively bonded tailor-made blanks”, Proc 7th Int Conf Workshop Numer Simul 3D Sheet Metal Forming Proc (NUMISHEET 2008), Interlaken, Switzerland, pp 421-426.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2008, “Optimization of computational procedures for full model strain path dependent analysis of forming limits”, Proc Int Deep Drawing Res Group Conf (IDDRG 2008), Olofström, Sweden, pp 419-428.

• Zadpoor, AA, Nikooyan, AA, 2008, “Development of an improved desiccant-based evaporative cooling system for gas turbines”, Proc ASME Turbo Expo 2008, Berlin, Germany (ASME paper number GT2008-50258).

16

• Zadpoor, AA, Nikooyan, AA, 2008, “The effects of footwear on impact force during running: a model-based study”, Proc 6th Int Conf Biomed Eng (BioMED 2008), Innsbruck, Austria, pp 240-245.

• Nikooyan, AA, Zadpoor, AA, 2007, “A model-based parametric study of soft tissue vibrations during running”, Proc Ann Symp IEEE/EMBS Benelux Chapter, Heeze, The Netherlands, pp 49-52.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2007, “Springback behavior of friction stir welded tailor-made blanks”, Proc Int Deep Drawing Res Group Conf (IDDRG 2007), Gyor, Hungary, pp 317-324.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2007, “Prediction of limit strains in limiting dome height formability test”, ESAFORM 2007, Zaragoza, Spain, AIP Conf Proc, vol 907, pp 258-263.

• Zadpoor, AA, Sinke, J, Benedictus, R, 2007, “Finite element modeling of transition zone in friction stir welded tailor-made blanks”, NUMIFORM 2007, Porto, Portugal, AIP Conf Proc, vol 908, pp 1457-1462.

• Shirazi, MA, Nikooyan, AA, Yazdi, MRH, Zadpoor, AA, Lucas, C, 2006, “Application of a neurofuzzy system to identification of some classes of soft tissues utilizing experimental data”, Proc IEEE Int Conf Eng Intelligent Sys (ICEIS 2006), Islamabad, Pakistan.

• Zadpoor, AA, Nikooyan, AA, Arshi, AR, 2005, “Impact-induced nonlinear vibrations of human body in ski”, Proc 12th Iranian Biomed Eng Conf, pp 596-603, Tabriz, Iran (in Farsi).

• Zadpoor, AA, Arshi, AR, Nikooyan, AA, 2005, “A bond graph approach to the modeling of fluid-solid interaction in cardiovascular system's pulsatile flow”, Proc 27th Int Conf IEEE Eng Med Biol Soc, Shanghai, China.

• Zadpoor, AA, Golshan, AH, 2004, “Development of a climate pattern for design and simulation of evaporative cooling systems”, Proc Building Energy Simul Conf (eSim 2004), pp 111-118, Vancouver, Canada.

• Zadpoor, AA, Omidi M, 2002, “Nonlinear oscillation of a mass point on a hemisphere”, Proc 3rd Student Conf Iran Soc Mech Eng, Babol, Iran.

(Extended) abstracts • Pouran, B, Arbabi, V, Zadpoor, AA, Weinans, H, 2016, “Micro-architecture affects the transport

of solutes at the interface of uncalcified cartilage and calcified cartilage/subchondral plate”, 2016 Osteoarth Res Soc Int (OARSI) World Cong, 31 Mar-3 Apr, Amsterdam, The Netherlands, Osteoarthritis & Cartilage, vol 24 (suppl), p S361.

• Moshtagh, PR, Pouran, B, Korthagen, N, Zadpoor, AA, Weinans, H, 2016, “Spatial variation of cartilage stiffness at micro and macro scale”, 2016 Osteoarth Res Soc Int (OARSI) World Cong, 31 Mar- 3 Apr, Amsterdam, The Netherlands, Osteoarthritis & Cartilage, vol 24 (suppl), p S376.

• Moshtagh, PR, Pouran, B, Zadpoor, AA, Korthagen, N, Weinans, H, 2016, “An optimized indentation method for cartilage stiffness measurement with spatial distribution”, Orthop Res Soc Ann Meet (ORS 2016), 5-8 May, Orlando, Florida.

• Pouran, B, Arbabi, V, Zadpoor, AA, Weinans, H, 2016, “Micro-features affect the transport of solutes at the interface of cartilage and subchondral plate”, Orthop Res Soc Ann Meet (ORS 2016), 5-8 May, Orlando, Florida.

• Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Multiphasic finite element models enable determining fixed charge density and the diffusion coefficient of charged solutes in articular cartilage”, Orthop Res Soc Ann Meet (ORS 2016), 5-8 May, Orlando, Florida.

• Amin Yavari, S, Zadpoor, AA, Lietaert, K, Vogely, HC, Albas, J, Weinans, J, 2016, “Additively manufactured porous biomaterials with nanotubular surfaces containing anti-microbial agents”, 10th World Biomaterials Congress (WBC), 17-22 May, Montreal, Canada, accepted.

• Zadpoor, AA, 2015, “Mechanics of additively manufactured porous biomaterials”, 6th Int Conf Mech Biomater Tissues, 6-10 Dec, Waikoloa, Hawaii, USA.

• Moshtagh, PR, Zadpoor, AA, Korthagen, N, Weinans, H, 2015, “Age-related biomechanical changes in articular cartilage and osteoarthritis”, 21th Swiss Conf on Biomater Regen Med, 9-10 Jun, Lausane, Switzerland.

• Pouran, B, Arbabi, V, Villamar, J, Zadpoor, AA, Weinans, H, 2015, "Contrast agent’s transport across healthy articular cartilage under various bath conditions", Orthop Res Soc Ann Meet (ORS 2015), 28-31 Mar, Las Vegas, US.

• Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2015, "Coupled finite element model-artificial

17

neural networks can predict mechanical properties of articular cartilage", Orthop Res Soc Ann Meet (ORS 2015), 28-31 Mar, Las Vegas, US.

• Zadpoor, AA, 2015, “Applications of photomechanics in tissue biomechanics”, Photomechanics 2015, 29 May 2015, Delft, The Netherlands.

• Zadpoor, AA, Nikooyan, AA, 2014, “Muscles and footwear in Running: implications for running injury prevention”, 7th World Congress of Biomechanics (WCB 2014), July 6-11, Boston, US.

• Campoli, G, Bolsterlee, B, Van der Helm, FCT, Weinans, H, Zadpoor, AA, 2014, “Accuracy of patient-specific finite element models of bones: scapula as a study case”, 7th World Congress of Biomechanics (WCB 2014), July 6-11, Boston, US.

• Grassi, L, Väänänen, SP, Amin Yavari, S, Jurvelin, J, Weinans, H, Zadpoor, AA, Isaksson, H, 2014, “Extracting accurate strain data from cadaver human femora using high-speed digital image correlation”, 7th World Congress of Biomechanics (WCB 2014), July 6-11, Boston, US.

• Arbabi, V, Campoli, G, Weinans, H, Zadpoor, AA, 2014, “Estimation of cartilage properties using indentation tests, finite element models, and artificial neural networks”, 11th World Congress on Computational Mechanics (WCCM XI), July 20-25, Bercelona, Spain.

• Van der Stok, J, Lozano, D, Chin Chai, Y, Amin Yavari, S, Bastidas Coral, AP, Verhaar, JAN, Gómes-Barrera, E, Schrooten, J, Jahr, H, Zadpoor, AA, Esbrit, P, Weinans, H, 2014, “Osteostatin-coated porous titanium implants improve early bone regeneration in cortical bone defects in rats”, 22nd Ann Meet Europ Orthop Res Soc (EORS 2014), July 2-4, Nantes, France.

• Agricola, R, Heijboer, MP, Ginai, AZ, Roels, P, Zadpoor, AA, Verhaar, JAN, Weinans, H, Waarsing, JH, 2014, “Cam deformity is gradually and exclusively acquired during skeletal maturation: a prospective study with a minimum of 2 years follow-up”, Europ Cong Radiology (ECR 2014), Mar 6-10, Vienna, Austria.

• Rahnamay Moshtagh, P, Pouran, B, Weinans, H, Zadpoor, AA, 2014, “The elastic modulus of articular cartilage at nano-scale and micro-scale measured using indentation type atomic force microscopy”, 2014 Osteoarth Res Soc Int (OARSI) World Cong, Apr 24-27, Paris, France, Osteoarthritis & Cartilage, vol 22 (suppl), pp S359-S360.

• Pouran, B, Kock, L, Gawlitta, D, Zadpoor, AA, Weinans, H, 2014, “Zone-dependent diffusion of contrast agent molecules in healthy equine articular cartilage exposed to various bath ionic strength”, 2014 Osteoarth Res Soc Int (OARSI) World Cong, Apr 24-27, Paris, France, Osteoarthritis & Cartilage, vol 22 (suppl), pp S105-S106.

• Campoli, G, Bolsterlee, B, Weinans, H, Zadpoor, AA, 2013, “Accuracy analysis of patient-specific finite element models of the scapula”, XIV Int Symp Comp Simul Biomech, Aug 1-3, Natal, Brazil.

• Grassi, L, Väänänen, SP, Amin Yavari, S, Weinans, H, Jurvelin, JS, Zadpoor, AA, Isaksson, H, 2013, “Surface strain measurement of a cadaver human femur using high-speed digital image correlation”, 19th Cong Europ Soc Biomech (ESB2013), Aug 25-28, Patras, Greece.

• Grassi, L, Väänänen, SP, Amin Yavari, S, Weinans, H, Jurvelin, JS, Zadpoor, AA, Isaksson, H, 2013, “Validation of subject-specific finite element models of composite bones using optical full-field strain measurements”, 11th Int Symp Comp Meth Biomech Biomed Eng (CMBBE 2013), Apr 3-6, Utah, US.

• Van der Stok, J, Wang, H, Amin Yavari, S, Zadpoor, AA, Lieshout, E, Patka, P, Verhaar, J, Jahr, H, Leeuwenburgh, S, Weinans, H, 2013, “Guided bone regeneration in critical defects using porous titanium scaffolds in combination with nanostructured colloidal gelatin gels for controlled release of BMP-2 and FGF-2”, Orthop Res Soc Ann Meet (ORS 2013), 26-29 Jan, San Antonio, US.

• Reyes Lúa, AM, Jahr, H, van Schie, HTM, Weinans, H, Zadpoor, AA, 2012, “Prediction of the elastic strain limit of the tendon using a shape-based comparative method”, 20th Ann Meet Europ Orthop Res Soc (EORS 2012), 26-28 Sep, Amsterdam, The Netherlands.

• Koomen, TJ, Mores, G, Vennema, B, Wessels, J, Tuijthof, GJM, Zadpoor, AA, 2012, “Application of computational ultrasound for detection of cartilage defects”, 20th Ann Meet Europ Orthop Res Soc (EORS 2012), 26-28 Sep, Amsterdam, The Netherlands.

• Van der Stok, J, Wang, H, Amin Yavari, S, Zadpoor, AA, van Lieshout, EMM, Patka, P, Verhaar, JAN, Jahr, H, Leeuwenburgh, SCG, Weinans, H, 2012, “Guided bone regeneration in critical defects using porous titanium scaffolds loaded with gelatin nanosphere-based gels for controlled release of BMP-2 and FGF-2”, 20th Ann Meet Europ Orthop Res Soc (EORS 2012), 26-28 Sep, Amsterdam, The Netherlands.

• Campoli, G, Zadpoor, AA, 2012, “Estimation of the loads experienced by bone tissue using a

18

hybrid simulated annealing-pattern search optimization algorithm”, 6th Europ Cong Comput Meth App Sci Eng (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

• Nikooyan, AA, Zadpoor, AA, 2012, “Fast simulation of bone remodeling using artificial neural networks”, 6th Europ Cong Comput Meth App Sci Eng (ECCOMAS 2012), 10-14 Sep 2012, Vienna, Austria.

• Campoli, G, Weinans, H, Van der Helm, FCT, Zadpoor, AA, 2012, “Subject-specific modeling of the adaptation of the scapula bone tissue”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S114.

• Poelert, SL, Campoli, G, Van der Stok, J, Amin Yavari, S, Weinans, H, Zadpoor, AA, 2012, “Relating the microstructure of Ti foam to load distribution and induced bone ingrowth”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S334.

• Campoli, G, Weinans, H, Zadpoor, AA, 2012, “Prediction of the femoral load using bone adaptation models and artificial neural networks”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S119.

• Amin Yavari, S, Weinans, H, Zadpoor, AA, 2012, “What surface strains does the bone experience just before fracture?”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S259.

• Poelert, SL, Weinans, H, Zadpoor, AA, 2012, “Brownian dynamics of microtubules”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S440.

• Väänänen, SP, Amin Yavari, S, Zadpoor, AA, Weinans, H, Jurvelin, JS, Isaksson, H, 2012, “Measurement of surface strain distribution in composite femora using digital image correlation”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S540.

• Väänänen, SP, Isaksson, H, Waarsing, E, Zadpoor, AA, Jurvelin, JS, Weinans, H, 2012, “Estimation of 3d rotation of femur in 2d radiographs - effects on shape parameters”, 18th Cong Europ Soc Biomech (ESB2012), July 1-4, Lisbon, Portugal, J Biomech, vol 45, p S459.

• Zadpoor, AA, 2012, “Open inverse and forward problems in theoretical modeling of bone tissue adaptation”, Euromech Colloquium 534: Adv Exper Approaches in Inverse Prob Tissue Biomech, 29-31 May, Saint-Étienne, France.

• Väänänen, S, Isaksson, H, Waarsing, E, Zadpoor, AA, Jurvelin, J, Weinans, H, 2011, “Estimation of rotation in femoral 2D radiographs”, 8th Baltic Bone and Cartilage Conf (BBC 2011), 12-14 Oct, Malmo, Sweden.

• Poelert, S, Weinans, H, Zadpoor, AA, 2011, “Thermal fluctuations of anisotropic semiflexible polymers”, 4th Europ Cell Mech Meet (CellMech 2011), 17-19 Oct, Amsterdam, The Netherlands.

• Bosma, T, Buiter, E, Roobeek, W, van de Weg, G, Kok, AC, Terra, MP, Zadpoor, AA, Tuijthof, GJM, 2011, “Detection of osteochondral defects with ultrasound: a cadaveric pilot study”, 19th Ann Meet Europ Orthop Res Soc (EORS 2011), 1-2 Sept, Vienna, Austria.

• Zadpoor, AA, Campoli, G, Weinans, H, 2011, “Neural network load identification using the morphology of trabecular bone”, Cong Int Soc Biomech (ISB 2011), 3-7 July, Brussels, Belgium.

• Zadpoor, AA, Nikooyan, AA, 2011, “Modeling the fatigue-related changes in the ground reaction force and soft tissues vibrations during running”, Cong Int Soc Biomech (ISB 2011), 3-7 July, Brussels, Belgium.

• Campoli, G, Weinans, H, Zadpoor, AA, 2011, “identification of physiological load from the density distribution of the femur using artificial neural networks”, 1st Int Symp Numer Simul Orthop Biomech (SimOrtho), Aug 26-27, Rostock, Germany.

• Väänänen, S, Isaksson, H, Waarsing, E, Zadpoor, AA, Jurvelin, J, Weinans, H, 2011, “Estimation of rotation in femoral 2D radiographs”, 1st Int Symp Numer Simul Orthop Biomech (SimOrtho), Aug 26-27, Rostock, Germany.

• Campoli, G, Weinans, H, Zadpoor, AA, 2011, “A fast and robust implementation of a bone-remodeling algorithm”, 3rd Dutch Biomed Eng Conf, 20-21 January, Egmond aan Zee, The Netherlands, p 112.

• Zadpoor, AA, Nikooyan, AA, 2006, “Forced vibration analysis of harmonically excited nonlinear viscoelastic biomaterials”, J Biomech, vol 39, pp S641-S642.

• Nikooyan, AA, Zadpoor, AA, Arshi, AR, 2006, “A bond graph approach to analysis of effects of arthrosclerosis on cardiovascular system’s performance”, J Biomech, vol 39, pp S606.

• Nikooyan, AA, Zadpoor, AA, Jannesar, S, 2006, “Finite element 2D nonlinear analysis of human

19

fingertip to asses a model of tactile sensation”, J Biomech, vol 39, pp S639. • Zadpoor, AA, Nikooyan, AA, Arshi, AR, 2006, “Development of a nonlinear viscoelastic model

of human body for computation of impact force during running”, J Biomech, vol 39, pp S180. • Zadpoor, AA, Nikooyan, AA, Arshi, AR, 2005, “An empirical approach to assessment of the

human brain's capability in learning of polynomial functions”, Emirates Med J, vol 23(3), pp 69-70.

• Zadpoor, AA, 2004, “Nonlinear dynamics of parametrical excited two-degrees-of freedom flexible pendulum”, 21st Int Cong Theor App Mech, 15-21 Aug, Warsaw, Poland.

Last update: June 5th, 2016