Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
A REPORT ON CANVAS PREPARATION BASED ON DESIGN THINKING AND CANVAS EXHIBITION
& PRESENTATION by 7th SEM STUDENTS
Organized By:-
Electronics and Communication Department
Department of Electronics and Communication Engineering
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH
AN APPRECIABLE INITIATIVE TOWARDS INNOVATIVE THINKING BY GTU: Managing projects in
effective ways is important for all industries and is also the main focus of a number of academic initiatives. The
Project Canvas is a convenient tool for communicating within the project team, for decision making, and is thereby
also a way of managing progress in the appropriate manner. Unforeseen obstacles are always a part of the project
management process, and they can affect resources, time and quality. Therefore, the success of a project is closely
linked to the team’s ability to plan, adjust and react to changing circumstances. Project Canvas is created in order
to help all members of a team obtain a clear overview of a project.
Considering all of the above points & for the ease and better understanding of the activities and challenges while
doing the project, initiative was taken by Mr. Kushal Patel, EC Department, to arrange such activity and students
have made three canvas in the first phase of their project, namely; Observation Matrix, Ideation Canvas &Product
Canvas.
Program Schedule:-
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 2
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
(1) OBSERVATION MATRIX CANVAS: Date:-29/09/2014
When defining the project scope, the team explores the immediate project activities, milestones and end results.
They are placed either inside or outside of the project’s scope. The elements should be revised until a satisfactory
scope has been created. To make the best use of scope as a project guideline, all stakeholders should commonly
agree upon and authorize the defined scope before initiating the project. All these activities and their summary were
jotted down by all the students in their canvas using sticky notes. They had funneled out a single scope and limitation
that will be overcome by their projects. This canvas formed the base of their project and directed their work flow.
The first schematic below shows a typical layout of an observation matrix.
Announcement and Seminar related to CANVAS
26/09/2014
Observation & Ideation Canvas Making Event
29/09/2014
Product Developement Canvas Making Event
30/09/2014
Exhibition and Presentation of CANVAS
01/10/2014
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 3
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 4
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 5
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 6
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 7
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
(2) IDEATION CANVAS: Date:-29/09/2014
Decision points: for selecting sets of actions and transition to a new phase.
Coordination points: where work on several fields must be completed at a certain point in time.
Approval: both internal and external.
Liability transfers: to or from the project team.
All these points were covered in this canvas it focused on the people being influenced by the project, Activities to
be done to achieve the milestones.
“What is the best way to describe the necessary actions?
Does each action have a direct link to one or more of the outcomes?
Are the actions detailed enough to develop a project plan?” all these questions were answered by various teams in
their ideation canvas in props/possible solutions.
Schematic shows the typical ideation canvas sample. Both these canvas were completed on 29th by the students
successfully following the GTU norms.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 8
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 9
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
(3) PRODUCT DEVELOPMENT CANVAS: Date:-30/09/2014
Purpose: The reason the project is carried out and the intentions of the project owner. The outcome captures what
the project should lead towards. The other elements in the canvas should support and contribute to attaining the
result. The result can be seen as a unifying intention throughout the project process. “What do we want to deliver
to obtain the purpose? Who are the targeted users of the project? Who will benefit from the outcome of the project?
Are there people in the project team who also represent the users?” All these questions were raised and resolved by
the students in the product canvas. Schematic shows a particular product canvas. This activity was carried out on
30th September. With these two activities Canvas making event was concluded.
(4) EXHIBITION OF CANVAS: Date:-01/10/2014
An exhibition of these canvas made by all the teams was carried out at the EC Department of SALITER campus.
Event started at 10.30 am on 1st of October. All the teams gave presentation on their respective canvas. External
faculty inspected these canvases and gave valuable advices to the students. A healthy participation from the students
and continuous support of the faculty members made it a successful event!
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 10
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 11
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 12
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 13
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
Canvas PRESENTATION AND CANVAS EXHIBITION & PRESENTATION| 14
SAL INSTITUTE OF TECHNOLOGY AND ENGINEERING RESEARCH.
“Such interventions by GTU Innovation Council is going to help students in great manner in understanding the
real purpose of engineering and help them in making efficient problem solver. “ – Faculty members of SAL
Inst.of Technology