Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
An indexing/skewing drive system for rotating the motor cores used for electric motors in home electrical appliances.
Series
1
An indexing/skewing drive system for rotating the motor cores used for electric motors in home electrical appliances.
The Servo-dex EVR2 series is an indexing/skewing drive system for rotating the electric motor cores used in home appliances. It is optimal for electric motor core production press lines that make motors for home appliances, such as air conditioners and general-purpose motors.It reduces mold maintenance by suppressing vibration when stopping a workpiece with high-precision positioning.It can be controlled easily with a timing signal from the press, allowing various types of control.
Features
Specification tableUnit
kg・m2
deg
deg
N
N
kg
kW
EVR2-030
0.015
100
2,000
110
3.0
EVR2-075
0.05
100
2,000
125
7.5
EVR2-150
0.15
100
3,000
185
15
Note
The capacity changes with the load
Load weight
At center of the output shaft*
Item EVR2-300
1.25
100
4,000
405
30
* Use a timing belt that has low elastic deformation to suppress residual vibration
Capacity graph
Series
Any angleAny angle
General-purpose models providing basic performance at a low cost
Outstanding reliability due to our original vibration damping design
Supports optional stacking angle settings and various types of control patterns
It can be controlled easily with a timing signal from the press
Its high precision positioning increases mold life.
The combination of a servo driven feeder and a servodex device results in maximum motor core line optimization
●
●
●
●
●
●
Load inertia (standard)
Rotation angle of the built up core
Indexing angle
Permitted axial load
Permitted radial load
Product weight
Motor capacity
EVR2-030
Load=0.005 kg・m2
Load=0.015 kg・m2
Load=0.01 kg・m2
100 100 200 300 400 500200 300 400 500 600 700
Press speed (min-1) Press speed (min-1)
100 200 300 400 500
Press speed (min-1)
100 200 300 400 500 600 700
Press speed (min-1)
Rotation angle (deg)
0
30
90
120
150
180
Rotation angle (deg)
0
30
90
120
150
180
Rotation angle (deg)
0
30
90
120
150
180
Rotation angle (deg)
0
30
90
60 60 6060
120
150
180
Load=0.01 kg・m2
Load=0.03 kg・m2
Load=0.05 kg・m2
Load=0.05 kg・m2
Load=0.1 kg・m2
Load=0.15 kg・m2
Load=0.25 kg・m2
Load=1.25 kg・m2
Load=0.75 kg・m2
EVR2-075 EVR2-150 EVR2-300Indexing angle=180° Indexing angle=180° Indexing angle=180° Indexing angle=180°
2
Dimensional drawing
EVR2-030 EVR2-075
EVR2-150
Control panel
EVR2-300
[Unit:mm]
025
95
205
275300
(430)φ40 h7 0
-0.025
62
468420
607
φ50
(4)φ22(For mounting)
Vibration damping alloy plates(×4)
Scale
Servomotor(YASKAWA)
0
(91)
(135)
0290
Jack bolt
Cooling fan(Orientalmotor)
Scaleneedle
02060
120180200240
356(369.2)
70
340
(4)M10×1.5 THRU(For lifting)
Adjustment bolt(For belt tension)
025
95
205
275300
(430)
62
468420
607
Vibration damping alloy plates(×4)
Scale
0
(62)(91)
(135)
0290
Jack bolt
Cooling fanMDS1238H-24(Orientalmotor)
ServomotorSGMGV-75A3A21(YASKAWA)
Scaleneedle
02060
120
200240
356(369.2)
70
340
4×φ22(For mounting)
φ40 h7 0-0.025
φ50Adjustment bolt(For belt tension)
(4)M10×1.5 THRU(For lifting)
050
110
240
300350
(525)
72Adjustment range
470518
φ65
808.5
Vibration damping alloy plates(×4)
0
(86)(133)
(145)
0290
Jack bolt
Cooling fan
ServomotorSGMGV-1EA3A21(YASKAWA)
02060110
170
230
356(369.2)
385
(4)M10×1.5 THRU(For lifting)
76
Adjustment bolt(For belt tension)
(4)φ22 THRU(For mounting)
φ50 h7 0-0.025
035110
210
310385420445
(480)
(615)
φ80
(6)φ22 THRU(For mounting)
72 36
590638
807
Cooling fanMDS138H-24(Orientalmotor)
Vibration damping alloy plates(×6)
Scale
0383
0
(86)
(397)
(145)
095
(502.6)
Jack bolt
ServomotorSGMVV-3ZA3D2N(YASKAWA)
02580
185245305
455471
(484.2)
(4)M12×1.75 THRU(For lifting)
M12×1.75 THRU(For lifting)
76
475
φ60 h7 0-0.03
Adjustment bolt(For belt tension)
Emergencystop switch
Air OUTAir OUT
Air IN Air IN
Touch panel
530
570 310 46610
Mass:120kg
※ The control panel dimensions for the EVR2-300 are different. Please contact us.
M10×1.5 THRU(For lifting)
M10×1.5 THRU(For lifting) M10×1.5 THRU
(For lifting)
Scaleneedle
Adjustment range
Adjustment range
Adjustment range
Adjustment range
Adjustment range
Adjustment range
Adjustment range
4.5
EVR2‐2019/11E(DT)
Service network
MEMO
Specifications and dimensions are subject to change without notice. Consult Sankyo sales before ordering.Patent rights and copyrights for some mechanisms, trademarks, images, drawings and other material in this catalog all belong to Sankyo Seisakusho Co.
MEMO
Mon-Fri AM8:30-12:00 PM13:00-17:30 UTC + 09:00 (JST) (Except public holidays and company holidays) Contact us
Global network
■Head Office(International department)3-37-3 Tabatashinmachi, Kita-ku, Tokyo, Japan 114-8538PHONE: +81-(0)3-3800-3330 FAX: +81-(0)3-3800-3380 E-MAIL: [email protected]
■SANKYO SEISAKUSHO CO. TAIWAN BRANCHNo.25, Gongyequ 40th Rd., Xiehe Vil., Xitun Dist., Taichung City 40768, Taiwan (R.O.C.)PHONE: +886-(0)4-2359-4048FAX: +886-(0)4-2359-4720E-MAIL: [email protected]
http://www.sankyo-seisakusho.co.jp
Group CompanySANKYO AMERICA INC.10655 State Route 47 Sidney, Ohio, 45365 U.S.A.PHONE:+1-(0)937-498-4901・FAX:+1-(0)937-498-9403E-mail:[email protected]
SANKYO KOREA CO., LTD.1449-48 Seobu-ro, Gwonseon-gu, Suwon-si, Gyeonggi-do, 16643 KoreaPHONE:+82-(0)31-895-5991・FAX:+82-(0)31-895-6607E-mail:[email protected]
SANKYO CHINA TRADING CO., LTD.[SHANGHAI HEAD OFFICE]Room 1103, Block B, No.391 Guiping Road, Shanghai 200233 ChinaPHONE:+86-(0)21-5445-2813・FAX:+86-(0)21-5445-2340E-mail:[email protected]
RODAX VIETNAM CO., LTD.Plot No. M1, Thang Long Industrial Park IIDi Su, My Hao, Hung Yen, Viet NamPHONE:+84-(0)221-3-589701・FAX:+84-(0)221-3-589708
SANKYO WORKS (THAILAND) CO., LTD.9/31 Moo 5, Phaholyotin Road, Klongnueng, Klong Luang, Patumthani 12120 ThailandPHONE:+66-(0)2-516-5355・FAX:+66-(0)2-068-0931E-mail:[email protected]
HANGZHOU SANKYO MACHINERY CO., LTD.No.2518 Jiang Dong 2 Road, Hangzhou Jiang Dong Industrial Park,Xiaoshan Zone, Hangzhou, Zhejiang, ChinaPHONE:+86-(0)571-8283-3311・FAX:+86-(0)571-8283-1133
[SHENZHEN BRANCH OFFICE]Unit 19J, Tower B, NEO Building, No.6009 Shennan Avenue, Futian District, Shenzhen ChinaPHONE:+86-(0)755-8230-0270・FAX:+86-(0)755-8236-4605
[TIANJIN BRANCH OFFICE]Room 2706, Jinhuang Building, No.20 Nanjing Road, HeXi District Tianjin ChinaPHONE:+86-(0)22-2312-1005・FAX:+86-(0)22-2312-1007
[GUANGZHOU BRANCH OFFICE]Room 913, Xing Pu buliding, No.12 Guan Hong Road,Guangzhou Economic Development Zone, Huang Pu, Guang Zhou 510670 ChinaPHONE:+86-(0)20-8985-1846・FAX:+86-(0)20-8225-7346
[WUHAN BRANCH OFFICE]Room 2301, Taihe Square, No.134 Wusheng Road, Wuhan, Hubei Province ChinaPHONE:+86-(0)27-8568-5818・FAX:+86-(0)27-8568-2818
RODAX VIETNAM CO., LTD.
SINGAPORE
SANKYO WORKS(THAILAND)CO., LTD.
TAIWAN
OFFICEFACTORY
HEAD OFFICE
SANKYO AMERICA INC.
AGENT
SANKYO KOREA CO., LTD.
THAILAND
ITALY
SANKYO MIYAGI SEISAKUSHO CO.
HANGZHOU SANKYO MACHINERY CO., LTD.
SANKYO CHINA TRADING CO., LTD.
SANKYO SHIZUOKA SEISAKUSHO CO.SANKYO SEISAKUSHO CO.