Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
3D
Sca
nn
ing
Mic
rosc
ope
10 - 70 lpcm | 24 - 180 lpi
for Engraving, Coating & Anilox High Volume Analysis
AniCAM-HVLS QC
X/ Y/ Z & 3-dimensional analysis
++
+++
+++
Volume
Die Cut plate
Tri-Helical Anilox roll
Etched Embossing Cylinder
Wall WidthCell Depth
Cell Opening Screen Count Engraving Angle
The AniCAM-HVLS 3D Scanning Microscope is a very professional instrument, it’s operation is really simple: For volume readings place the portable system on top of your engraved roll, select the appropriate setup and click in the 3D-Scan button to get a full reading. The image will then be transferred to an Analysis window, which simultaneously displays the info page with the volume and depth readings. The system generates a report which can be printed or the data can be exported to a database or spreadsheet program for further analy-sis.
The AniCAM camera window helps you to find the target area
Cell Info window
Rotatable 3D View of the cells
„Electronic Cut“ Cell Profiling
An Average Mode allows to predefine the number of sections to be read across the roll and the number of repetitions per section
Easy to use and portable Scanning Microscope
AniCAM HVLS Analysis
www.troika-systems.com
Volume Informationum 100200300400500600700800900
1000110012001300140015001600170018001900200021002200
10020030040050060070080090010001100120013001400150016001700180019002000210022002300240025002600270028002900
VolumeDepth
21 3
84.9 84.8 cm3/m2174 175 um
Comments:[C3/2.8,R2,E100/16,x2/0]
Customer: Sample Customer
Report by: Henry 8th
Roll ID: Sample Roll
Job Date: 14/04/2011, 15:27
Roll Condition and SpecificationCell Opening: 317 um
Cell Wall: 92 um
Screen Angle: 50.0 degrees
Screen Count: 24 lpcm
Signature
Technical data
1 Blackworth CourtBlackworth Industrial EstateHighworth, Wiltshire, SN6 7NSUnited Kingdom
Tel: +44 (0) 1793-766-355Fax: +44 (0) [email protected]
Your authorised local Troika dealer:
Options
q Software Options
AMS Anilox Management database System for controlling the total Anilox Inventory regarding Volume, Wear, Variance, Suitability and much more
Complex Engravings: For analysing open structures, trihelical and non-stand-ard closed cell structures.
Foil Strip Analysis (Press-O-Film Analysis)
q Calibration / Maintenance / Service
X/Y/Z Calibration tool (for Release Q2/2013)
Annual Online-Calibration + Certification
Annual Service Contract | Online Training and Support
qMedia
Ceramic and chrome cylinders Die Cut plates (Height, Width, Profile, Phase)Embossing cylinders (Depth, Width, Profile)
q Cell Evaluation
Analysis range: 10 - 70 lpcm | 24 - 180 lpi
Anilox volume calculation in cm3/m2 or BCM
Measurement depth to 1,600 micron in 1-, 2-, 4- or 8-micron steps
View range: up to 4.2 mm x 3.2 mm
Measurements:
• Volume • Depth • Screen count • Opening • Wall width • Cell angle • Engraving angle
Geometric measurements
Averaged readings over “n” sections across the roll
Integrated Roll Management for easy tracking of roll histories (date and total average volume).
q Image Analysis
Images are taken by the camera and transferred via USB to the PC.
The image analysis and calculations are done by the dedicated AniCAM-HVLS QC Application.
Software based Vibration detection and suppression.
Digital Zoom: Dual Zoom and Zoomfactor 1:6
q Variance of Readings
Volume readings: typically better than ± 1 cm3/m2 @ 30 cm3/m2 | ± 0.65 BCM @ 20 BCM
qData archiving
.acp format (incl. 2D/3D info); JPEG and BMP (bitmap export)
Export of readings (AMS, Spreadsheets, Database applications etc)
q Light Source
1 co-axial and 2 x 9 radial white light LEDs (SW-controlled)
q Lenses
The Microscope comes with a special fixed x02 lens
Product Specifications Technical Specifications – AniCAM-HVLS QC
February 2013, E&OE. – Specifications and details subject to change without notice
q Electronics
Mono CMOS array with 1280 x 960 pixel resolution.
USB2.0 Control via PC
Long term battery pack & external ac power supply
qDimensions
AniCAM: 19 x 10 x 20 cm (W x D x H)
AniCAM Case: 40 x 31 x 15 cm (W x D x H)
qWeight
AniCAM: 2.5 kg / 5.5 lbs
AniCAM with Case: 6 kg / 13.2 lbs
q Environmental conditions
Temperature: 16° - 32° C / 60° - 90° F
Humidity: 40% - 60%, non-condensing
qMinimum PC-requirements
Intel or AMD processor, 2+ GHz, 2+ GB RAM, 1024 x 768, 24-bit Display, USB2.0, 60+ GB hard disk space
qOperating Systems
Windows XP / Windows 7 / Windows 8
qWarranty
12 months return to base. Software upgrades FOC for 12 months.
AniCAM-HVLS 3D Scanning Microscope
v8.x
– 0
2/20
13
High Volume Low Screen
AniCAM HVLS QC readings can automatically be imported into Troika’s Anilox Management System. The AMS database appli-cation enables the printer to fully manage his Anilox inventory by tracking the wear, volume and variance of each roll. Over a period of time the roll history identifies wear on the rolls. This information can lead to reduced setup time and ink adjustment – increasing the availability of the presses.
Visit our WEB site www.troika-systems.com for further informa-tion on the AMS data base!
AMS compatible