Upload
letruc
View
218
Download
0
Embed Size (px)
Citation preview
ANSECO G R 0 U P
Your Pnrl11er i11 Producl Snfely
TEST REPORT Company: Simple Symbol Ltd
Recipient:
Recipient Email:
cc to Email:
Steven Yung
[email protected] I [email protected]
SAMPLE INFORMATION:
Description:
Assortment:
SKU/style No.:
Factory/Supplier/Vendor:
Country of Distribution:
Quantity Submitted:
Testing Period:
Flying Twirler 3PKS X 7IN
3 Colors: (Neon Green I Neon Orange I Neon Yellow) & Orange color straw G16933 I 7140816-101
United States
6 pes
12/09/2014- 12/15/2014
Test Report # Date of Issue:
Pages:
Date Received :
Purchase Order Number:
Toy Co./Agency:
Country of Origin:
Labeled Age Grade:
Recommended Age Grade:
Tested Age Grade:
IESDNG
AT-1500
14H-04260
December 15, 2014
Page 1 of 11
December 09, 2014
1701
China
4+
Over 4 years of age
Over 4 years of age
OVERALL RESULT: PASS
Refer to page 2 for test result summary and appropriate notes.
ANSECO GROUP (HK) LIMITED
Vincent Chow Wai Kit
Manager, Chemical Laboratory
ANSECO GROUP (HK) LIMITED
Joseph Kwan Tsz Hung
Assistant Manager, Physical Laboratory
Tile test result(s) and cancfusion(s) in til is repor t relate to the sample(s) tested as described herein. This test report may nat be reproduced in whole or in part, without written approval of ANSECO Group (HK} Limited.
# Test is not covered under ACLASS (Certificate II AT-1500) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of mult ilateral r ecognit ion arrangements that fac ili tate acceptance of test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrluer ;, Product Snfety I£SDNO AT-1500
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
Test Report # Date of Issue:
Pages:
Date Received:
14H-04260
December 15, 2014
Page 2 of 11
December 09, 2014
At the request of the client, the following tests were conducted:
CONCLUSION TEST(S) CONDUCTED
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
CPSIA Section 106 & ASTM F963-11 Clause 4.3.5, Soluble Elements in Substrate Materials
CPSIA Section 101, Total Lead in Substrate Materials
CPSIA Section 108, Phthalates- Mouthable (DBP, BBP, DEHP, DnOP, DINP, DIDP)
California Proposition 65, Phthalates (DBP, BBP, DEHP, DINP, DIDP, DnHP)
CPSIA Section 106, Mandatory Toy Safety Standard ASTM F963-11, Mechanical Hazards 16 CFR 1500 Federal Hazardous Substances Act (FHSA_1 Mechanical Hazards
ASTM F963-11 Labeling
16 CFR 1500.44 and ASTM F963-11, Section 4.2, Flammability of Solids
19 CFR 134.11, Country of Origin#
CPSIA Section 103, Tracking Labels for Children's Products#
Uniform Packaging and Labeling Regulation#
The test result(s) and conc/usion(s) In this report relate to the somp/e(s) tested as described herein. This test report may not be reproduced In whole or in port, without written approval of ANSECO Group (HK) Limited.
#Test is not covered under ACLASS {Certificate II AT-1500) accredited listed scope. ACLASS Is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 3842 Kwal Fung Crescenl, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852·3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrl11er i111'roducl Safely
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
DETAILED RESULTS:
Test Report# Date of Issue:
Pages:
Date Received :
IESl!NO
AT-1500
14H-04260
December 15, 2014
Page 3 of 11
December 09, 2014
CPSIA Section 106 & ASTM F963-11 Clause 4.3.5, Soluble Elements in Substrate Materials
Substrate Materials Other than Modeling Clay
Analysis performed by Inductively Coupled Plasma-Mass Spectrometry to determine compliance with the above referenced regulation and standard. [Referenced Test Method: ASTM F963-11 Clause 8.3.5]
Specimen No. 1 2 3
Test Item Result Result Result (ppm) (ppm) (ppm)
Soluble Sb ND ND ND
Soluble As ND ND ND
Soluble Ba ND ND ND
Soluble Cd ND ND ND
Soluble Cr ND ND ND
Soluble Pb ND ND ND
Soluble Hg ND ND ND
Soluble Se ND ND ND
Conclusion PASS PASS PASS
Note: Sb = Antimony; As = Arsenic; Ba = Barium; Cd = Cadmium; Cr =Chromium; Pb = Lead; Hg =Mercury; Se = Selenium ppm (Parts per million) = mg/kg (Milligrams per kilogram) L T = Less than ND = Not detected (Reporting Limit = 2ppm)
Remark: Test portion of Specimen #1 found on single sample is 31.9 mg.
4 5
Result Result (ppm) (ppm)
ND ND
ND ND
ND ND
ND ND
ND ND
ND ND
ND ND
ND ND
PASS PASS
The test result(s) and canclusian(s) in this report relate ta tire sample{s) tested as described herein. Tlris test report may nat be reproduced in whale ar in part, without written approval of ANSECO Group (HK) Limited.
#Test Is not covered under ACLASS (Certificate II AT-1500) accredited listed scope.
Limit
Soluble (ppm)
60
25
1000
75
60
90
60
500
ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 36-42 Kwai Fung Crescent, Kwal Chung N.T., Hong Kong Tel: 852-3165 6000 Fax: 852-3572 0374
CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrt11er i11 Product Snfely
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
DETAILED RESULTS:
Test Report # Date of Issue:
Pages:
Date Received:
IESDNQ
AT-1500
14H-04260
December 15, 2014
Page 4 of 11
December 09, 2014
CPSIA Section 106 & ASTM F963-11 Clause 4.3.5, Soluble Elements in Substrate Materials
Substrate Materials Other than Modeling Clay
Analysis performed by Inductively Coupled Plasma-Mass Spectrometry to determine compliance with the above referenced regulation and standard. [Referenced Test Method: ASTM F963-11 Clause 8.3.5]
Specimen No. 6 7 8
Test Item Result Result Result (ppm) (ppm) (ppm)
Soluble Sb ND ND ND
Soluble As ND ND ND
Soluble Ba ND ND ND
Soluble Cd ND ND ND
Soluble Cr ND 2 ND
Soluble Pb ND ND ND
Soluble Hg ND ND ND
Soluble Se ND ND ND
Conclusion PASS PASS PASS
Note: Sb = Antimony; As = Arsenic; Ba = Barium; Cd = Cadmium; Cr = Chromium; Pb = Lead; Hg = Mercury; Se = Selenium ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 2ppm)
9 ---
Result Result (ppm) (ppm)
ND ---
ND ---ND ---ND ---
2 ---
ND ---ND ---ND ---
PASS ---
The test result(s) ond conclusion(s) in this report relate to the sample(s) tested as described herein. This test report moy not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
#Test is not covered under ACLASS (Certi ficate# AT-1500) accredited listed scope.
Limit
Soluble (ppm)
60
25
1000
75
60
90
60
500
ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral r ecognition arrangements that facilitate acceptance o f test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescenl, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrluer ill Product Snfety
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
DETAILED RESULTS:
CPSIA Section 101, Total Lead in Substrate Materials
Test Report # Date of Issue:
Pages:
Date Received:
J(mNO
AT-1 500
14H-04260
December 15, 2014
Page 5 of 11
December 09, 2014
Analysis performed by Inductively Coupled Plasma Optical Emission Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E1002-08.2 (Non-Metal)]
Specimen No. 1 2+3+4 5
Test Item Result Result Result (ppm) (ppm) (ppm)
Total Pb ND ND ND
Conclusion PASS PASS PASS
Note: Pb =Lead ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit= 20ppm)
6+7+8 9
Result Result (ppm) (ppm)
ND ND
PASS PASS
Composite results are based on specimen of least mass resulting in highest potential concentration.
The test result(s) and cancluslon(s) in this report relate to the sample(s) tested os described herein. This test report may not be reproduced In whole or In port, without written approval of ANSECO Group (HK) Limited.
# Test is not covered under ACLASS (Certificate II AT-1500) accredited listed scope.
Limit
Total (ppm)
100
ACLASS Is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 36-42 1<wal Fung Crescent, Kwal Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS-HK· REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrluer iu Product Safely
TEST REPORT Company:
Recipient:
Recipient Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
Test Report# Date of Issue:
Pages:
nmNq
AT-1500
14H-04260
December 15, 2014
Page 6 of 11
cc to Email: Date Received: December 09, 2014
DETAILED RESULTS:
CPSIA Section 108, Phthalates- Mouthable (DBP, BBP, DEHP, DnOP, DINP, DIDP)
Analysis performed by Gas Chromatography/Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-C1001-09.3]
Specimen No. 1 2+3+4 5 6+7+8 9
Test Item Result Result Result Result Result (ppm) (ppm) (ppm) (ppm) (ppm)
DBP ND ND ND ND ND
BBP ND ND ND ND ND
DEHP ND ND ND ND ND
DnOP ND ND ND ND ND
DINP ND ND ND ND ND
DIDP ND ND ND ND ND
Conclusion PASS PASS PASS PASS PASS
Note: DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DINP = Diisononyl phthalate, DIDP = Diisodecyl phthalate; DnHP = Di-n-hexyl phthalate ppm (Parts per million) = mg/kg (Milligrams per kilogram) = 0.0001 % w/w (Percent by weight) LT = Less than ND = Not detected (Reporting Limit = 120ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
The test result{s) and canclus/on(s) In tllis report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or In part, without written approval of ANSECO Group (HK) Limited.
#Test Is not covered under ACLASS (Certificate# AT-1500) accredited listed scope.
Limit (ppm)
1000
1000
1000
1000
1000
1000
ACLASS Is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS·HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrluer i11 Produd Snfely
TEST REPORT Company:
Recipient:
Recipient Email :
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
Test Report # Date of Issue:
Pages:
JESDNQ
AT- 1500
14H-04260
December 15, 2014
Page 7 of 11
cc to Email: Date Received: December 09, 2014
DETAILED RESULTS:
California Proposition 65, Phthalates (DBP, BBP, DEHP, DI NP, DIDP, DnHP)
Analysis performed by Gas Chromatography/ Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-ClOOl-09.3]
Specimen No. 1 2+3+4 5 6+7+8 9
Test Item Result Result Result Result Result (ppm) (ppm) (ppm) (ppm) (ppm)
DBP ND ND ND ND ND
BBP ND ND ND ND ND
DEHP ND ND ND ND ND
DINP ND ND ND ND ND
DIDP ND ND ND ND ND
DnHP ND ND ND ND ND
Conclusion PASS PASS PASS PASS PASS
Note: DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DINP = Diisononyl phthalate, DIDP = Diisodecyl phthalate; DnHP = Di-n-hexyl phthalate ppm (Parts per million) = mg/kg (Mil ligrams per kilogram) = 0.0001 % w/w (Percent by weight) LT = Less than ND = Not detected (Reporting Limit = 120ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Remark:
Limit (ppm)
1000
1000
1000
1000*
1000
1000
*On 20 December 2013, diisononyl phthalate (DINP) was added onto the Prop 65 list of chemicals as a chemical known to the state of California to cause cancer. DINP is among the phthalates commonly used as plasticisers in various polyvinyl chloride (PVC) products such as wire and cable coatings, wall coverings, roofing, coated fabrics, self-adhesive films and automobile parts. Starting 20 December 2014 local California Attorney-generals and non-governmental organizations will be allowed to begin enforcement actions against businesses and manufacturers that fail to warn consumers about exposure to DINP.
The test result(s) and concluslon(s) In tills report relate to the somple(s} tested as described herein. T/Jis test report may not be reproduced In whole or in part, without written approval of ANSECO Group (HK} Limited.
#Test is not covered under ACLASS (Certificate #I AT-1500) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwal Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Partner iu Produd Safety
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] 1 [email protected]
DETAILED RESULTS:
Test Report # Date of I ssue:
Pages:
Date Received:
T£SDNQ
AT-1500
14H-04260
December 15, 2014
Page 8 of 11
December 09, 2014
CPSIA Section 106, Mandatory Toy Safety Standard ASTM F963-11, Mechanical Hazards 16 CFR 1500, Federal Hazardous Substances Act (FHSA), Mechanical Hazards
Mechanical hazards evaluated as described in 16 CFR 1500.51-1500.53 and ASTM F963-11, as applicable.
Test Conclusion Observation
Impact PASS No Sharp Edges or Sharp Points
Torque PASS No Sharp Edges or Sharp Points
Tension PASS No Sharp Edges or Sharp Points
Other Applicable ASTM F963-11 Sections
Section Test Conclusion
4.1 Material Quality PASS
4.7 Accessible Edges PASS
4.9 Accessible Points PASS
4.18 Holes, Clearances and Accessibility of Mechanisms PASS
5.16 Promotional Materials PASS
7.1 Producers Markings PASS
16 CFR 1500.44 and ASTM F963-11, Section 4.2, Flammability of Solids
Test Conclusion Observation
Flammability of Solids PASS The burn rate is less than or equal to 0.1 in/sec.
19 CFR 134.11, Country of Origin#
Test Conclusion Observation
Country of Origin PASS Present on packaging and can be read easily by consumer at the point of sale
The test result(s) and canc/us/on(s) In tills report relate to the sample(s) tested as described herein. This test report may not be reproduced In whole or in part, without written approval of ANSECO Group (HK) Limited.
# Test is not covered under ACLASS (Certificate H AT-1500) accredited listed scope. ACLASS is recognized by JLAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 1<wai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 652-3165 8000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrt11er i11 Product Safety
TEST REPORT Company:
Recipient:
Recipient Email:
cc to Email:
Simple Symbol Ltd
Steven Yung
[email protected] I [email protected]
DETAILED RESULTS:
Test Report # Date of Issue:
Pages:
Date Received:
TESQHG
AT-1500
14H-04260
December 15, 2014
Page 9 of 11
December 09, 2014
CPSIA Section 103, Tracking Labels for Children's Products#
Requirement Conclusion Observation
Manufacturer or private labeler listed, location & date of manufacture, including batch, run PASS Information was present. number and/or other identifying characteristics
Uniform Packaging and Labeling Regulation#
Test Conclusion Observation
Declaration of Identity PASS The packaging contains the declaration of identity
Declaration of Responsibility PASS The packaging contains the declaration of responsibility
Tile test result(s) and conc/usion(s) in this report relate to the sample(s) tested os descr ibed herein. This test report may not be reproduced in whale or in part without wr itten approval of ANSECO Group (HK) Limited.
#Test is not covered under ACLASS (Certificate # AT-1500) accredited listed scope.
ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test int ernat ionally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Part11er i11 Product Safety
TEST REPORT Company: Simple Symbol Ltd
Recipient:
Recipient Email:
Steven Yung
[email protected] I [email protected]
cc to Email:
SPECIMEN DESCRIPTION:
Specimen No. Specimen Description
1 Black printed transparent plastic with adhesive
2 Orange plastic
3 Green plastic
4 Yellow plastic
5 Orange PVC
6 Red soft plastic
7 Green soft plastic
8 Yellow soft plastic
9 Translucetn glue
Test Report# Date of Issue:
Pages:
Date Received:
IESDNQ
AT-1500
14H-04260
December 15, 2014
Page 10 of 11
December 09, 2014
Location
Sticker of flying twirlers
Flying twirler
Flying twirler
Flying twirler
Handle of flying twirlers
End of flying twirlers
End of flying twirlers
End of flying twirlers
Glue of end of flying twirlers
The test result{s) and canclusion{s) in this report rela te to the sample{s) tested as described herein. This test report may not be reproduced in whole or in part, without wri tten approval af ANSECO Group {HK) Limited.
#Testis not covered under ACLASS (Certificate II AT-1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements t hat facilitate acceptance of test Internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 3842 Kwai Fung Crescenl, Kwal Chung N.T., Hong l<ong Tel: 852-3185 8000 Fax: 852-3572 0374 CS·HK· REOOS ansecogroup.com Ver.Ol
ANSECO G R 0 U P
Your Pnrl uer in Product Safety
TEST REPORT Company: Simple Symbol Ltd
Recipient:
Recipient Email:
Steven Yung
[email protected] I [email protected]
cc to Email:
SAMPLE PHOTO:
-End Report-
Test Report # Date of Issue:
Pages:
Date Received:
IW!!Ia AT-1 500
14H-04260
December 15, 2014
Page 11 of 11
December 09, 2014
The test result(s) and canclusian(s) In tills report relate to the sample(s) tested as described herein. Tills test report may not be reproduced In whole or In part, without written approval of ANSECO Group (HK) Umited.
#Test is not covered under ACLASS {Certificate II AT-1500) accredited listed scope. ACLASS is recognized by I LAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test Internationally.
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescenl, Kwai Chung N.T., Hong l<ong Tel: 652-3165 6000 Fax: 852-3572 0374 CS-HK-REOOS ansecogroup.com Ver.Ol