Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
89101/16/20
Aspirate TauroLock™ from the catheter with a syringe.
Flush all lumens of the access device with 10 ml of sali-ne using a syringe applying the push-pause-technique.
Then start dialysis.
Afterwards, flush the access device with at least 10 mL saline.
Gently tap the neck of the ampoule to remove the solu-tion.
Put the ampoule in a position that you can see the white dot on top and break off the neck with a quick move-ment.
Withdraw the required volume of TauroLock™ from the ampoule into a sterile syringe.
For an efficient prophylactic use of TauroLock™ slowly instill a volume sufficient to fill all lumens of the device entirely.
The filling volume of each lumen is indicated on the de-vice or is available from the manufacturer of the device.
C AT H E T E R - L O C K S Y S T E M
1
2
3
This practical illustration does not replace the manufacturer’s instruction for use.
For further information see also: www.taurolock.com
DIALYSIS