“Going for the Gold in Materials Technology”...139th Annual Meeting & Exhibition February 14-18, 2010 • Washington State Convention & Trade Center • Seattle, Washington USA

139th Annual Meeting & ExhibitionFebruary 14-18, 2010 • Washington State Convention & Trade Center • Seattle, Washington USA

FIN

AL

PR

OG

RA

M“Going for the Gold in Materials Technology”

Includes:Meeting Information

Floor Plans Exhibition DirectoryTechnical Program

LEARN • NETWORK • ADVANCE

Upcoming Meetings

When it comes to professional development and networking, there is nothing like a face-to-face connection with colleagues. TMS provides members with numerous opportunities for advancing research and collaborating on the latest technology through a series of diverse conferences. Take advantage of these engaging events for the materials science and technology community.

ICMOVPE 2010Incline Village, NV ................................ May 23-28 ................................ Hyatt Regency Lake Tahoe

2010 Electronic Materials Conference (EMC10)Notre Dame, IN .................................... June 23-25 ............................... University of Notre Dame

Lead-Zinc 2010 (in conjunction with Conference of Metallurgists (COM 2010)Vancouver, BC, Canada....................... October 3-6 .............................. Hyatt Regency Vancouver

7th International Symposium on Superalloys 718 & Derivatives 2010Pittsburgh, PA ...................................... October 10-13 .......................... Marriott Pittsburgh City Center

Materials Science & Technology 2010 (MS&T)Houston, TX ......................................... October 17-21 .......................... George R. Brown Convention Center

2011 TMS Annual Meeting & ExhibitionSan Diego, CA ..................................... February 27-March 3 ............... San Diego Convention Center

Co-sponsored Meetings

Copper 2010Hamburg, Germany ............................. June 6-10 ................................. Congress Center Hamburg

1st TMS-ABM International Materials Congress 2010 (To be held in conjunction with the 65th Annual Congress of ABM and the 18th IFHTSE Congress)Rio de Janeiro, Brazil ........................... July 26-30 ................................ International Rio Hotel

7th Pacific Rim International Conference on Advanced Materials and Processing 2010 (PRICM-7)Cairns, Australia .................................. August 1-5 ............................... Cairns Convention Centre

Uranium 2010 ConferenceSaskatoon, SK, Canada ...................... August 15-18 ........................... Delta Bessborough & Sheraton Cavalier

Table of Contents

Dear Colleagues and Friends:

It is wonderful to have all of our esteemed members, exhibitors and guests assembled here in Seattle for the 139th annual meeting of The Minerals, Metals & Materials Society. Your attendance at this annual forum is a testament to the dedication of our members and the steadfast support of industry experts from the materials field. This network of professional exchange will keep the society a global thought leader and move materials science forward.

Please take advantage of these invaluable offerings during the conference:

Technical & Poster Sessions – Nearly 60 symposia will focus on the pioneering efforts of some of the world’s brightest and most promising minds. Sessions are offered in dynamic technical areas including aluminum and magnesium, advanced characterization and modeling, electronic materials, high performance structural materials, materials and society, materials processing and production, and nanoscale and amorphous materials.

Continuing Education – Knowledge is the power that fuels developments in research and builds careers. TMS 2010 features 7 compelling courses and workshops designed to enhance your conference experience through education.

Networking – Simply put, there is nothing like being here. Your presence at TMS 2010 offers one of the greatest benefits – connecting with colleagues from around the world! Enjoy casual conversations or attend one of our 11 technical receptions. On Sunday evening, gather with pro-fessionals in your field, or join us at the President’s Welcoming Reception on Monday and Happy Hour on Tuesday, both held in the exhibit hall.

Special Lectures – One of the hallmarks of the TMS annual meeting is the series of special lectures presented by prestigious professionals in the materials field. Here is this year’s agenda: Extraction & Processing/Materials Processing & Manufacturing Joint Lecture; Extraction & Processing Division Distinguished Lecturer; Light Metals Division Lecture, and the Young Leaders Tutorial Lecture. See page 15 for speakers.

Awards Presentation – Celebrating the accomplishments of fellow colleagues builds our society. The TMS and AIME Awards Dinner is a must-attend event on Tuesday evening. See page 16 for a preview.

Exhibition – The movers and shakers in the technology solutions field shine at this all-encompassing showcase. Among the noteworthy exhibitors available to answer questions and demonstrate their wares is the Automobili Lamborghini Advanced Composite Structures Laboratory, Department of Aeronautics & Astronautics, from the University of Washington, which will feature an actual Lamborghini sports car.

Student Events – The future of TMS is alive in its student members. The annual meeting offers budding scientists and engineers the opportunity to network with peers, as well as learn from the pros. Visit the Student Poster Contest and see what students are working on, and enjoy their competitive spirit at the Materials Bowl sponsored by Alcoa. Details are on page 18.

So, how do we possibly summarize all the great things TMS and the annual meeting have to offer? Perhaps our TMS, MSE & Me Video Contest participants can show us. See what’s on their minds at the winners’ announcement, Sunday at 8 p.m. in Room 6C of the convention center.

Get ready to experience TMS 2010. It all starts now!

Sincerely,

Ray D. Peterson2009 TMS President

Welcome to the TMS 2010 Annual Meeting & Exhibition!

139th Annual Meeting & Exhibition

February 14-18, 2010Washington State Convention & Trade CenterSeattle, Washington USA

Presidential Welcome ......................... 1Meeting Policies .................................. 2Floor Plans ......................................... 3-8Schedule of Events ............................. 9-13

Lectures, Luncheons & Receptions .... 14Awards Banquet ................................. 16Student Events ................................... 18Proceedings ........................................ 19

TMS 2010 Leadership ........................ 20Exhibit Directory ................................. 21Technical Program .............................. 37

� LEARN • NETWORK • ADVANCE

Full Conference RegistrationYour full conference badge provides you admission to each of these premier events!

Technical & Poster SessionsExhibitionPresident’s Welcoming Reception in the Exhibit HallSymposia-Related Networking ReceptionsHosted Exhibit Hall ReceptionYoung Leaders Tutorial Lecture+

Women in Science Breakfast Lecture*

Student Poster ContestStudent Materials Bowl

+Young Leaders lecture is free. Lunch requires preregistration.*Breakfast is free; preregistration required.

Internet OptionsFree wireless access will be available to attendees on the 4th and 6th floors of the Washington State Convention & Trade Center.

Policies

BadgesAll attendees must wear registration badges at all times during the conference to ensure free admission to events included in the paid fee such as technical sessions, exhibition and receptions. “Exhibit Only” badges provide exclusive admittance to the show floor for events in the exhibit hall. “Guest” badges are for spouses or companions of registered attendees and used as identification only. “Guest” and “Exhibit Only” may not attend technical sessions.

RefundsThe deadline for all refunds was January 15, 2010. No refunds will be issued at the conference. Fees and tickets are nonrefundable.

Americans With Disabilities ActTMS strongly supports the federal Americans with Disabilities Act (ADA) which prohibits discrimination against, and promotes public accessibility for those with disabilities. In support of, and in compliance with, ADA, we ask those requiring specific equipment or services

to contact TMS Meeting Services in advance.

Cell Phone UseIn consideration of attendees and presenters, TMS kindly requests your cooperation in minimizing disturbances which may occur during technical sessions due to cell phone use. Please place cell phones or other electronic devices in “silent mode” while you are in meeting rooms.

Audio/Video Recording TMS reserves the right to all audio and video reproduction of presentations at TMS sponsored meetings. Recording of sessions (audio, video, still photography, etc.) intended for personal use, distribution, publication, or copyright without the express written consent of TMS and the indi-vidual authors is strictly prohibited. Contact TMS Technical Programming at (724) 776-9000, ext. 212, to obtain a copy of the waiver release form.

Photography NoticeBy registering for the meeting, all attendees acknowledge that they may be photographed by TMS personnel while at events. Photos may be used for promotional purposes in print and online.

1.2.3.4.5.6.7.8.9.

Meeting Perks and Policies


�

Sheraton Seattle Hotel Floor Plans

MEETING ROOMS

RESTROOMS

LEVEL 1

LEVEL �

MEETING INFORMATION


Sheraton Seattle Hotel Floor Plans

MEETING ROOMS

RESTROOMS

LEVEL �

ELEVATORLOBBY

CIRRUS

PIKE ST. TOWER UNION ST. TOWER

PREFUNCTION

LEVEL � LEVEL �5

ELEVATORLOBBY

CIRRUS


PREFUNCTION


5MEETING INFORMATION

ELEVATORLOBBY

CIRRUS


PREFUNCTION

Convention Center Floor Plans

To Union Sq.

209

210

211

212

213

214

201

203

202

204

205

206

Ret

ail

Int’l.Meeting

Place

W M

Exit

Exi

tE

xit

Exi

t

Exi

tE

xit

2B

Ram

pR

amp

10

Exi

t

2A

Open To/FromLevel 3

W

M

To/FromLevel 1

Ram

p

208

N

292

290

LEVEL �



LEVEL �

N

392

390

Exi

tE

xit

To/FromLevel 4

To Rows A-G

307

308

309

310

306

305

304

303

302

301

Galleria

Public Parking

Exi

tExit

Exi

t

Exi

t

10

Open

To Rows H-L

To/FromLevel 2

IMPBelow

3B

3AW

M


�


LEVEL �

Think Green … Place your empty water bottles, soda cans and paper in the recycling bins.

REGISTRATION

REGISTRATION

Office/Storage

Membership &Publications

3Mx3M

3Mx3M

ES Office

Sales Office

30'

27'

Fre

eman

Ser

vice

Des

kC

ontr

acto

rsS

ervi

ce D

esk

COUNTERINFORMATION

100 101

20'102

107

109

111

113

115

117

119

121

20'

127

129

131

200

20'

201

20'

205

206

20'209

210 211

212 213

215

218 219

220

20'

221

223

20'

226

20'

230

233

235

237

300

30'

308 309

20'

20'310

312

314 315

318

20'

319

20'

30'

326

20'

327

329

332

20'

333

335

336 337

20'

409

20'

20'

414 415

20'

419

427

49'

30'Activity Area

435

437

501

20'

505

509

511

513

20'514

519

520

20'

521

523

534 535

536 537

600 601

20'602

604

607

20'608

20'

612

614 615

617

618

620

622

627

629

631

633

635

637

6Mx6M

Exhibitor Show Office

6Mx6M

boneyard

Lounge

56 - POSTER BOARDS

Dimension10'x10'10'x20'10'x30'20'x20'20'x30'30'x49'

Qty8922

2311

SCALE IN FEET: WSC

NOR

FHC

F

CWF

WOMEN MEN

PUBLICPHONES

EXIT

FLOORS 4 TO 6ESCALATORS

COATS

EXIT

SCALATORSOORS 1 TO 4

EN BELOW

FHC

GATE 7

CWF

MEN

PHONESPUBLIC

WOMEN

FFHCFE

F

CWF

COATS

SHOWUP TO 5

EXIT

EXIT

EXIT

DOWN

UP

WOMEN

ESCALATORSFLOORS 4 & 6

ONLY

EXIT

MEN

F

CWF

MENSHOW

UP TO 5

UP TO 5 & 6

EXIT

EXIT

EXIT

PHONESPUBLICPUBLIC

PHONES

PLANTER

GATE 5

FEFHC

FHCFE

FF

FHCFE

FE

EXITEXIT

GATE 6

FFEFHC

GATE 4EXIT

SOUTH SERVICE CORRIDOR

F

FHCFE

CWF

PUBLICPHONES

WOMEN

EXIT

EXIT

GATE 10

FHCFE

FEF

FHC

FHCFE

4

EXIT

GAT

PUBPHO

WSU

USEWSCT

FHCFF

FHCF

FHCFE

FHCFE

L

EXIT

EXIT

WALL "C"

WALL "B" WALL "C"

WALL "A1"

WALL "B"

WA

LL "A

"

MEETING ROOM4C-2

MEETING ROOM4C-1

DO

WN

UP

DO

WN

Serviceentrance.

AREAUSABLE

20' x 22'6"

N11

5" High Low Curb,Located 12" From The Window

EXITEXIT F

47-1/4" High

214

216

135

20'

20'

227

229

301

303

305 404

400

20'

426

428

432

434

504

401

30'

500

20'

516

518

421

20'

634

636

611

613

619

621

623

CyberPod

CyberPod

TMS 2010 Bookstore Area

Booth BBooth A Booth C

TMS 2010 Annual Meeting & ExhibitionFebruary 2010

Washington State Convention & Trade CenterSeattle, WA

MEMBERSHIP

EXHIBIT HALL



LEVEL �

W

(6F)

602

Exit Exit Exit

610

609

608 607

606

605

603

604

MW

601

M W

EastLobby

614

612

611

615

Ex

it

Exi

t

SouthLobby

(Below)

WestLobby

620

619

618 617

M

Exi

t

6E 6C 6B 6A

Kitchen

4 5

Exi

t613

Galleria(Below)

616

Exit Exit

Exi

t

Exit

10

(6D)

AUTHOR’S COFFEE


�MEETING INFORMATION

TMS Meetings and Events are scheduled for the following dates, times, and locations:

Key: C = Washington State Convention & Trade Center S = Sheraton Seattle Hotel

SATURDAY, FEBRUARY 13

FUNCTION TIME LOCATION ROOM

COMMITTEE MEETINGSProfessional Registration Workshop .....................................................................9 a.m. to 3 p.m. ............................ S ................................RavennaProfessional Registration Committee Meeting ......................................................3 to 5 p.m. .................................... S ................................Ravenna

SUNDAY, FEBRUARY 14


REGISTRATION ...................................................................................................11 a.m. to 7:30 p.m. .....................C.......... 4th Floor, South LobbyTMS MEMBER WELCOME CENTER ..................................................................11 a.m. to 7:30 p.m. .....................C.......... 4th Floor, South LobbyTMS, MSE & ME VIDEO CONTEST ANNOUNCEMENT ....................................8 to 8:30 p.m. ...............................C...............................Room 6C

WORKSHOPS, SHORT COURSES, FORUMS & TUTORIALSLead Free Solder Technology 2010 ......................................................................8:30 a.m. to 5 p.m. .......................C........................Rooms 2A/2BManaging Smelter Operations in Turbulent Times ................................................8:30 a.m. to 5 p.m. .......................C...........................Room 4C 2Materials in Nuclear Power Plant Construction ....................................................8:30 a.m. to 5 p.m. .......................C...........................Room 4C 1Process Modeling Short Course ...........................................................................8:30 a.m. to 5 p.m. .......................C...........................Room 4C 4Shutdown and Restart of Potlines ........................................................................8:30 a.m. to 5 p.m. .......................C...........................Room 4C 3ANSWER Tutorial Series: Neutron & Synchrotron Scattering 101 ................................................................................................1 to 4:30 p.m. ...............................C..............................Room 401

STUDENT EVENTSMaterials Bowl ...........................................................................................................................................................C...............................Room 6CElimination Rounds ...............................................................................................noon to 4 p.m. ..............................C...............................Room 6CChampionship Round ...........................................................................................8:30 p.m. ......................................C...............................Room 6CStudent Networking Mixer ....................................................................................9 to 11 p.m. ..................................C...........................Ballroom 6B

SOCIAL FUNCTIONSFellows & Invited Guests Reception .....................................................................4:30 to 6 p.m. ............................... S ....................................AspenYoung Leader/New Member Reception ................................................................5 to 6 p.m. .................................... S .................................Douglas2009 Functional & Structural Nanomaterials: Fabrication,Aluminum Alloys: Fabrication, Characterization & Applications Networking Reception .................................................................6 to 8 p.m. ....................................C..............................Room 615Biological Materials Science Reception................................................................6 to 8 p.m. ....................................C..............................Room 205Characterization of Minerals, Metals, & Materials Reception ........................................................................................................6 to 8 p.m. ....................................C..............................Room 307Computational Thermodynamics & Kinetics Networking Reception .....................6 to 8 p.m. ....................................C..............................Room 308

Schedule of Events (as of 1/20/10)

10 LEARN • NETWORK • ADVANCE


Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium Networking Reception ..................................................................6 to 8 p.m. ....................................C .............................Room 306Light Metals Networking Reception ......................................................................6 to 8 p.m. ....................................C..............................Room 608Magnesium Technology 2010 Networking Reception ...........................................6 to 8 p.m. ....................................C..............................Room 612Pb-Free Solders and Emerging Interconnect & PackagingTechnologies Networking Reception ....................................................................6 to 8 p.m. ....................................C..............................Room 204Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications Networking Reception ............................6 to 8 p.m. ....................................C..............................Room 603Ultrafine Grained Materials – 6th International Symposium Networking Reception ..................................................................6 to 8 p.m. ....................................C..............................Room 606

COMMITTEE MEETINGSFinancial Planning Committee ..............................................................................7:30 to 8:30 a.m. ......................... S ............................GreenwoodProfessional Registration Leadership Committee .................................................9 to 11 a.m. ................................. S ...................................EverettTMS Board of Directors Orientation & Briefing .....................................................9 a.m. to 1:30 p.m. ....................... S ....................................AspenRecycling & Environmental Technologies Committee ...........................................noon to 1:30 p.m. .........................C..............................Room 208Young Leader Committee Business Meeting ........................................................12:30 to 2 p.m. ............................. S ................................IssaquahAccreditation Committee ......................................................................................12:30 to 2:30 p.m. ........................ S ............................ WallingfordPyrometallurgy Committee ...................................................................................1 to 2:30 p.m. ...............................C..............................Room 210Magnesium Committee .........................................................................................1:30 to 3:15 p.m. ..........................C..............................Room 304Nominating Committee .........................................................................................2 to 3 p.m. .................................... S .................................KirklandThin Films & Interfaces Committee.......................................................................3 to 4 p.m. ....................................C..............................Room 211Aluminum Committee ...........................................................................................2:30 to 4 p.m. ...............................C..............................Room 305Public & Government Affairs Committee ..............................................................3 to 4:30 p.m. ............................... S ...................................EverettMaterials Characterization Committee .................................................................3 to 5 p.m. ....................................C..............................Room 203Program Committee .............................................................................................3 to 5 p.m. ....................................C..............................Room 208ABET Training Session .........................................................................................3 to 5 p.m. .................................... S ............................GreenwoodElectrode Subcommittee ......................................................................................4 to 5 p.m. ....................................C..............................Room 305ICME Committee ..................................................................................................4 to 5:30 p.m. ...............................C..............................Room 304Nanomaterials Committee ....................................................................................4 to 5 p.m. ....................................C..............................Room 309Publications Coordinating Committee .................................................................4 to 5:30 p.m. ............................... S .....................................CedarLMD Council Meeting ...........................................................................................4:30 to 6 p.m. ...............................C..............................Room 209Global Innovations Committee..............................................................................5 to 5:45 p.m. ...............................C..............................Room 301Hydrometallurgy and Electrometallurgy Committee .............................................5 to 6:30 p.m. ...............................C..............................Room 210Nanomechanical Materials Behavior Committee ..................................................5:45 to 6:45 p.m. ..........................C..............................Room 211Mechanical Behavior of Materials Committee ......................................................7 to 8:30 p.m. ...............................C..............................Room 203Alloy Phases Committee ......................................................................................7:30 to 9 p.m. ...............................C..............................Room 210Phase Transformations Committee .......................................................................7:30 to 9:30 p.m. ..........................C..............................Room 208

Schedule of Events

TMS, MSE & Me Video Contest Awards Ceremony

Nine creative TMS members have produced short film adaptations of their lives in materials science for the “TMS, MSE & Me Video Contest.” The top three winners of $2,010, $750 and $250 will be announced during a special presentation of all submissions on Sunday, February 14th at 8 p.m. prior to the Materials Bowl Championship Round at the Washington State Convention & Trade Center, Room 6C. Come and enjoy the show!


11

MONDAY, FEBRUARY 15


AUTHORS’ COFFEE ............................................................................................7:30 to 8:30 a.m. .........................C...........................Ballroom 6EREGISTRATION ...................................................................................................7 a.m. to 6 p.m. ............................C.......... 4th Floor, South LobbyTMS MEMBER WELCOME CENTER ..................................................................7 a.m. to 6 p.m. ............................C.......... 4th Floor, South LobbyGENERAL POSTER SESSION ...........................................................................5 to 6:30 p.m. ...............................C............................ Exhibit Hall

2010 TMS EXHIBITIONExhibit Hours ........................................................................................................noon to 6:30 p.m. .........................C................................4th FloorPresident’s Welcoming Reception ........................................................................5 to 6:30 p.m. ...............................C........................Rooms 4A/4B

TECHNICAL DIVISION STUDENT POSTER CONTEST ....................................5 to 6:30 p.m. ...............................C............................ Exhibit Hall

SOCIAL FUNCTIONSWomen in Science Breakfast/Lecture ...................................................................7 to 8 a.m. ................................... S ..................Grand Ballroom AGuest Hospitality ..................................................................................................7 to 10 a.m. ................................. S ............................GreenwoodPast Presidents’ Brunch ........................................................................................9:30 to 11 a.m. ............................ S .................................DouglasCalifornia Polytechnic State University Alumni Reception ....................................6:30 to 9 p.m. ......................................................................OffsiteColorado School of Mines Alumni Reception .......................................................7 to 8 p.m. .................................... S ....................................Aspen

COMMITTEE MEETINGSPbZn 2010 Planning Meeting ...............................................................................7 to 8:30 a.m. .............................. S ...................................Everett Met Trans “A” Board of Review .............................................................................7 to 8 a.m. ................................... S ................................IssaquahMet Trans Joint Commission .................................................................................8 to 10:30 a.m. ............................ S ................................IssaquahProcess Technology and Modeling Committee .....................................................8 to 9 a.m. ...................................C..............................Room 210Superconducting & Magnetic Materials Committee..............................................8 to 9 a.m. ...................................C..............................Room 208Membership & Student Development Committee .................................................8:45 to 9:45 a.m. ......................... S ............................ WallingfordEPD Council Meeting ...........................................................................................noon to 2 p.m. .............................. S ..............................Room 208Seven Springs Int’l Symposium on SuperalloysProgram Committee .............................................................................................noon to 2 p.m. .............................. S .................................... CedarGraduate Student Advisory Council .....................................................................noon to 1:30 p.m. ......................... S ............................ WallingfordMetSoc/TMS Leadership Meeting ........................................................................12:15 to 1:45 p.m. ........................ S ................... President’s SuiteEMPMD Council Meeting .....................................................................................12:30 to 2 p.m. .............................C..............................Room 210TMS Executive Committee ...................................................................................2 to 4 p.m. .................................... S ................... President’s SuiteSeven Springs Int’l Symposium on SuperalloysGeneral Organizing Committee ............................................................................5 to 7 p.m. .................................... S .................................... CedarAdvanced Characterization, Testing & Simulation Cmt .........................................5:30 to 6:30 p.m. ..........................C..............................Room 401Chemistry & Physics of Materials Committee.......................................................5:30 to 6:30 p.m. ..........................C..............................Room 208Surface Engineering Committee ...........................................................................5:30 to 6:30 p.m. ..........................C..............................Room 604Nuclear Materials Committee ...............................................................................5:30 to 7 p.m. ...............................C..............................Room 310Composite Materials Committee ..........................................................................5:45 to 6:45 p.m. ..........................C..............................Room 305Biomaterials Committee .......................................................................................6 to 7 p.m. ....................................C..............................Room 210Solidification Committee .......................................................................................6 to 7 p.m. ....................................C..............................Room 601Technical Division Board ......................................................................................6 to 8 p.m. ....................................C..............................Room 301Materials & Society Committee ............................................................................7 to 9 p.m. .................................... S ................................IssaquahComputational Materials Science & Engineering Committee ...............................8 to 9 p.m. ....................................C..............................Room 208


Think Green … Drop off your badge holder in the recycling bin before leaving the conference.

1� LEARN • NETWORK • ADVANCE

TUESDAY, FEBRUARY 16


AUTHORS’ COFFEE ............................................................................................7:30 to 8:30 a.m. .........................C...........................Ballroom 6EREGISTRATION ...................................................................................................7 a.m. to 6 p.m. ............................C.......... 4th Floor, South LobbyTMS MEMBER WELCOME CENTER ..................................................................7 a.m. to 6 p.m. ............................C.......... 4th Floor, South LobbyGENERAL POSTER SESSION ...........................................................................10:30 a.m. to 6 p.m. .....................C............................ Exhibit Hall

2010 TMS EXHIBITIONExhibit Hours ........................................................................................................10:30 a.m. to 6 p.m. .....................C................................4th FloorHappy Hour Reception .........................................................................................5 to 6 p.m. ....................................C............................ Exhibit Hall

TECHNICAL DIVISION LUNCHEON & LECTUREEPD/MPMD Luncheon .........................................................................................noon to 1:30 p.m. .........................C...............................Room 6CExtraction & Processing Division Distinguished Lecture ......................................1:45 to 2:15 p.m. ..........................C...............................Room 6C

STUDENT EVENTSTechnical Division Student Poster Awards ............................................................noon to 2:30 p.m. .........................C............................ Exhibit HallStudent Career Forum ..........................................................................................3 to 5 p.m. ....................................C........................... Rooms 4C3

TUTORIAL LECTURE/LUNCHEONYoung Leaders Tutorial Lecture/Luncheon ............................................................noon to 2 p.m. .............................. S .................................Douglas

WORKSHOPS, SHORT COURSES, FORUMS & TUTORIALSReliability Excellence Workshop ...........................................................................8 a.m. to 4:30 p.m. .......................C............................Room 4C 1Furnace Systems Technology 2010 Workshop .....................................................8:30 a.m. to 5 p.m. .......................C............................Room 4C 2

TMS-AIME ANNUAL AWARDS BANQUETReception .............................................................................................................6:30 to 7:15 p.m. .......................... S .....................Grand Ballroom (Pre-Function)Dinner and Awards ...............................................................................................7:15 to 10 p.m. ............................. S ...... Grand Ballroom B, C & D

SOCIAL FUNCTIONSGuest Hospitality ..................................................................................................7 to 10 a.m. ................................. S ............................GreenwoodActa Materialia, Inc. Board of Governors Luncheon .............................................noon to 1 p.m. .............................. S ....................................Aspen

COMMITTEE MEETINGSElectronic Packaging & Interconnection Committee .............................................7 to 8 a.m. ...................................C..............................Room 204Met Trans “B” Board of Review .............................................................................7 to 8 a.m. ................................... S ................................IssaquahMPMD Council Meeting ........................................................................................7 to 9 a.m. ...................................C..............................Room 210Acta Materialia, Inc. Board of Governors Meeting ................................................7:30 a.m. to 6 p.m. ....................... S .................................... CedarFellows Award Committee ....................................................................................7:30 to 9 a.m. .............................. S .................................KirklandHume-Rothery/ACTA Met Awards Committee ......................................................7:30 to 9 a.m. .............................. S .................................KirklandIOM/Mehl Awards Committee ...............................................................................7:30 to 9 a.m. .............................. S .................................KirklandCopper 2010 IOC Meeting ....................................................................................8 to 10 a.m. ................................. S ...................................EverettHonors & Professional Recognition Award Committee .........................................9 to 10 a.m. ................................. S .................................KirklandASM/TMS Leadership Meeting .............................................................................noon to 1:30 p.m. ......................... S ................... President’s SuiteSMD Council Meeting ...........................................................................................noon to 2 p.m. ..............................C..............................Room 210Powder Materials Committee ................................................................................12:30 to 2 p.m. .............................C..............................Room 208Women in Materials Science & Engineering Committee ......................................3 to 4:30 p.m. ............................... S ...................................EverettPRICM-7 International Organizing Committee .....................................................4 to 6 p.m. .................................... S ............................ WallingfordEducation Committee ...........................................................................................5 to 6:30 p.m. ............................... S ................................Issaquah

Schedule of Events


1�MEETING INFORMATION

FUNCTION .................................................................................... TIME ..........................LOCATION ..................ROOM

Energy Committee ................................................................................................5 to 6 p.m. ....................................C..............................Room 209Energy Conversion & Storage Committee ............................................................5 to 6 p.m. ....................................C..............................Room 210Refractory Metals & Materials Committee ............................................................5:30 to 6:30 p.m. ..........................C............................... Room 3BHigh Temperature Alloys Committee ....................................................................5:30 to 7 p.m. ...............................C..............................Room 212Titanium Committee .............................................................................................6 to 7 p.m. ....................................C..............................Room 618Shaping & Forming Committee ............................................................................6 to 8 p.m. ....................................C..............................Room 208Corrosion & Environmental Effects Committee ....................................................6:30 to 7:30 p.m. ..........................C..............................Room 213

WEDNESDAY, FEBRUARY 17


AUTHORS’ COFFEE ............................................................................................7:30 to 8:30 a.m. .........................C...........................Ballroom 6EREGISTRATION ...................................................................................................7 a.m. to 5 p.m. ............................C.......... 4th Floor, South LobbyTMS MEMBER WELCOME CENTER ..................................................................7 a.m. to 5 p.m. ............................C.......... 4th Floor, South LobbyGENERAL POSTER SESSION ...........................................................................10:30 a.m. to 2:30 p.m. ................C............................ Exhibit Hall

2010 TMS EXHIBITIONExhibit Hours ........................................................................................................10:30 a.m. to 3 p.m. .....................C................................4th Floor

TECHNICAL DIVISION LUNCHEONLight Metals Division Luncheon ............................................................................noon to 2:15 p.m. .........................C...............................Room 6C

WORKSHOPS, SHORT COURSES, FORUMS & TUTORIALSFurnace Systems Technology 2010 Workshop .....................................................8:30 a.m. to 5 p.m. .......................C............................Room 4C 2

SOCIAL FUNCTIONSGuest Hospitality ..................................................................................................7 to 10 a.m. ................................. S ............................Greenwood

COMMITTEE MEETINGSTMS Board of Directors Meeting ..........................................................................7:30 a.m. to noon ........................ S ................................IssaquahAluminum Processing Committee ........................................................................6:30 to 8 p.m. ...............................C..............................Room 210

THURSDAY, FEBRUARY 18


AUTHORS’ COFFEE ............................................................................................7:30 to 8:30 a.m. .........................C...........................Ballroom 6EREGISTRATION ...................................................................................................7 to 10 a.m. .................................C........... 4th Floor, South lobbyTMS MEMBER WELCOME CENTER ..................................................................7 to 10 a.m. .................................C........... 4th Floor, South lobby

COMMITTEE MEETINGSLight Metals Subject Chair Breakfast ...................................................................7 to 8:30 a.m. ..............................C..............................Room 209Worcester Polytechnic Institute Alumni Reception ...............................................5:30 to 8 p.m. ............................... S ...................................EverettFCRD Advanced Materials Development Workshop Planning Meeting ...............1 to 5 p.m. .................................... S ....................................Aspen



Lectures & Luncheons

Women in Science Breakfast Lecture“ADVANCing Women in Engineering” Monday • 7 to 8 a.m. • Sheraton Seattle, Grand Ballroom ASpeaker: Eve A. Riskin, associate dean of academic affairs, professor of electrical engineering and director of the ADVANCE Center for Institutional Change, University of Washington, USA

About the Topic:ADVANCE is an initiative of the National Science Foundation intended to improve the climate for success of women in science/technology/engineering/mathematics (STEM) at universities in the United States. At the University of Washington, the program has been in effect since 2001, focusing on faculty recruitment and retention as well as leadership development. Riskin, director of the university’s ADVANCE Center for Institutional Change, will discuss the program and highlight some of its successes. Also addressed will be interventions that can improve chances that women STEM faculty will succeed in their careers.

Extraction & Processing/ Materials Processing & Manufacturing Joint Division Luncheon Lecture“Titanium: Its Attributes, Characteristics and Applications” Tuesday • Noon to 1:30 p.m. • Washington State Convention & Trade Center, Room 6CSpeaker: Rodney Boyer, Boeing Commercial Airplanes, Seattle, Washington, USA

About the Topic:This presentation will focus on the desirable and unique attributes of this alloy system, the types of applications which result from these unique characteristics and a general overview of some of the approaches being taken to reduce the cost, some of which could have an impact on non-aerospace industries. These include techniques such as solid-state and fusion welding, roll-forged shapes, SPF and SPF/DB, new alloys and powder metallurgy.

Extraction & Processing Division Distinguished Lecture“Alloy Formation during Electrochemical Cementation Reactions”Tuesday • 1:45 to 2:15 p.m. • Washington State Convention & Trade Center, Room 6CSpeaker: J. Brent Hiskey, associate dean, University of Arizona, USA

About the Topic:Metal displacement (cementation) reactions have been important to many hydrometallurgical processes for centuries. For the most part, these reactions involve rather straight-forward electrochemical steps. The deposition of unique alloys by this technique has been reported for several systems. This paper describes these systems and provides an explanation for this phenomenon.

Young Leaders Tutorial Luncheon Lecture“Energy Materials – Past, Present, and Future” Tuesday • Noon to 2 p.m. • Sheraton Seattle, Douglas RoomSpeaker: Xingbo Liu, professor of mechanical & aerospace engineering, West Virginia University, USA

About the Topic:This presentation focuses on the history of pursuing improved materials for the need of production and efficient consumption of energy. Discussed will be primary sources of energy prior to the 18th century; how advances in technology, beginning with James Watt’s invention of the steam engine, led to coal and other resources being dominant sources of energy; today’s energy resources; how the demand of energy has been tremendously increased in recent years with the development of the world’s economy; and those of the foreseeable future.


15

Light Metals Division Luncheon Lecture“Aluminum – Are We There Yet?”Wednesday • Noon to 2:15 p.m. • Washington State Convention & Trade Center, Room 6CSpeaker: Wayne Hale, executive vice president and CEO, Century Aluminum, USA

About the Topic:With the recession and the associated impact on commodities, industry consultants and pundits continually prognosticate the future of the aluminum industry. The future of a commodity is an uncertain proposition, but usually there is a general consensus on the future trends of the market. For aluminum, the uncertainty of the market continues to generate debate. With a surplus of aluminum on world markets and the current global economic slowdown, the uncertainty regarding the future of the aluminum market has become a strong point of discussion. Optimism of a global recovery, the massive monetary and fiscal liquidity injected worldwide and the strong growth in emerging nations could lead to a surge in demand and an increase in prices. Others believe that the world of high inventories and increasing production will limit the upside. Review of the industry’s current position, the necessary milestones and the potential bumps along the way will help answer the vexing question…. “Are we there yet?”

William Hume-Rothery Award Lecture/Symposium“How Hume-Rothery’s Work Led to Computational Thermodynamics”Monday • 8:30 a.m. to 9:15 p.m. • Washington State Convention & Trade Center, Room 212Speaker: Didier de Fontaine, Professor Emeritus, University of California, USA

Institute of Metals/Robert Franklin Mehl Lecture“Nature-Inspired Structural Materials” — Biological Materials Science SymposiumTuesday • 8:35 a.m. to 9:15 a.m. • Washington State Convention & Trade Center, Room 205Speaker: Robert Ritchie, Chua Distinguished Professor of Engineering, University of California, USA

Vittorio de Nora Prize Lecture“Designing Crushing and Grinding Circuits for Improved Energy Efficiency”Wednesday • 9:50 a.m. to 10:15 a.m. • Washington State Convention & Trade Center, Room 2BSpeaker: Zeljka Pokrajcic, WorleyParsons Services Pty Ltd – Minerals and Metals, Australia

JIM International Scholar Award Lecture”Development of Coherent X-Ray Diffraction Microscopy and Its Application in Materials Science”Wednesday • 12:50 p.m. to 1:05 p.m. • Washington State Convention & Trade Center, Room 303Speaker: Yukio Takahashi, Osaka University, Japan

TMS Lunch and Learn“Carbon Fiber Composites Research and Development at Automobili Lamborghini”Monday • 12:30 p.m. to 1:45 p.m. • Washington State Convention & Trade Center, Room 4C2Speakers: Paolo Feraboli, Ph.D., assistant professor of Aircraft Materials and Structures and Director, Automobili Lamborghini Advanced Composite Structures Laboratory, Department of Aeronautics & Astronautics, University of Washington, USA; Dr. Luciano DeOto, senior manager of composites activities for Automobili Lamborghini S.p.A.,Italy

Award Winning Speakers

Spotlight Event

Think Green … Walk from your hotel to the convention center.

Lectures & Luncheons Cont.


Awards Banquet139th TMS and AIME Awards Presentation

With Installation of the 2010 TMS President

Tuesday, February 16 • Reception: 6:30 to 7:15 p.m.Dinner and Awards: 7:15 to 10 p.m. • Sheraton Seattle , Grand Ballroom B, C & D

Tickets may be purchased at the TMS registration desk

About the 2010 TMS PresidentGeorge T. “Rusty” Gray III is laboratory fellow at Los Alamos National Laboratory in Los Alamos, New Mexico, and a member of the National Materials Advisory Board of the U.S. National Academies. Gray has served as team leader of the Dynamic Materials Properties section, where he promoted dynamic structure/property research on materials within the U.S. Department of Energy.

Gray earned his B.S. and M.S. in Metallurgical Engineering from South Dakota School of Mines and Technology and his Ph.D. in metallurgical engineering from Carnegie Mellon University in Pittsburgh. Prior to joining Los Alamos, Gray held a postdoctoral fellowship at the Technische Universitaet Hamburg-Harburg in Germany. His research interests include the substructure evolution and mechanical response of metals, alloys, intermetallics, and composites as a function of microstructure and applied test conditions.

Gray is a member of the TMS Titanium and Mechanical Metallurgy committees and has served as the Structural Materials Division representative to the TMS Program Committee. Gray is also a member of ASM International, the American Physical Society, and the International Scientific Advisory Board of DYMAT Journal.

Ray Peterson 2009 TMS President

George T. “Rusty” Gray III 2010 TMS President

Ian Sadler 2009 AIME President

TMS Fellow Class of 2010Jeff DeHosson, University of Groningen, NetherlandsJames W. Evans, Wireless Industrial Technologies, California, USAEaso P. George, Oak Ridge National Laboratory, Tennessee, USARichard Hoagland, (Retired) Los Alamos National Laboratory, New Mexico, USAPhillip J. Mackey, Xstrata Process, Canada

Alexander Scott Distinguished Service AwardBrajendra Mishra, Colorado School of Mines, USA

Application to Practice AwardCarol Handwerker, Purdue University, Indiana, USA

•

•••••

•

Bruce Chalmers AwardCristoph Beckermann, University of Iowa, USA

Champion H. Mathewson AwardGuillaume Reinhart, Université Paul Cézanne, France

Early Career Faculty Fellow AwardXingbo Liu, West Virginia University, USA

Educator AwardJohn Moore, Colorado School of Mines, USA

Institute of Metals/Robert Franklin Mehl AwardRobert Ritchie, University of California, USA

John Bardeen AwardEugene Haller, Lawrence Berkeley National Laboratory, California, USA

Leadership AwardDonald Gubser, Naval Research Laboratory, California, USA

Robert Lansing Hardy AwardDiana Lados, Worcester Polytechnic Institute, Massachusetts, USA

William Hume-Rothery AwardDidier de Fontaine, University of California, USA

Shri Ram Arora AwardApu Sarkar, Bhabha Atomic Research Center, India

Vittorio de Nora Prize for Environmental Improvements in Metallurgical IndustriesZeljka Pokrajcic, WorleyParsons, Australia

Society Awards


1�MEETING INFORMATION

Electronic, Magnetic & Photonic Materials Division

Distinguished Scientist/Engineer AwardBrent Fultz, California Institute of Technology

Distinguished Service AwardElizabeth Holm, Sandia National Laboratories, California, USA

Extraction & Processing Division

Distinguished Lecturer AwardJ. Brent Hiskey, University of Arizona, USA

Distinguished Service AwardPatrick Taylor, Colorado School of Mines, USA

Science AwardStanko Nikolic, Xstrata Technology, CanadaPeter C. Hayes, University of Queensland, AustraliaHector Henao, University of Queensland, AustraliaEvgueni Jak, University of Queensland, Australia

Technology AwardGabriel Riveros, Universided de ChileAndrzej Warczok, Universided de ChileDaniel Smith, ENAMI, ChileAriel Balocchi, ENAMI, Chile

Light Metals Division

Distinguished Service AwardNeale Neelameggham, US Magnesium LLC, Utah, USA

Aluminum Reduction AwardPatrice Doiron, Alcoa Inc., CanadaStephen Lindsay, Alcoa Inc., Canada

Electrode Technology for Aluminum Production AwardJeremie Lhuissier, Rio Tinto Alcan, CanadaLailah Bezamanifary, Rio Tinto Alcan, CanadaMagali Gendre, Rio Tinto Alcan, CanadaMarie-Josee Chollier, Rio Tinto Alcan, Canada

Light Metals AwardAnthimos Xenidis, National Technical University of Athens, GreeceCharalabos Zografidis, National Technical University of Athens, GreeceIoannis Kotsis, National Technical University of Athens, GreeceDmitrios Boufounos, Aluminium of Greece

Light Metals Division JOM Best Paper AwardBarry Welch, Welbank Consulting, New ZealandMartin Iffert, Trimet Aluminum AG, GermanyMaria Skyllas-Kazacos, University of South Wales

Magnesium Application AwardOzgur Duygulu, TUBITAK Marmara Research Center, TurkeyOnuralp Yucel, Istanbul Technical University, TurkeySelda Ucuncuoglu, TUBITAK Marmara Research Center, TurkeyGizem Oktay, TUBITAK Marmara Research Center, TurkeyAli Arslan Kaya, Mugla University, TurkeyDeniz Sultan Temur, Tubitak, Turkey

Magnesium Fundamental Research AwardAlok Singh, National Institute for Materials Science, JapanJulian M. Rosalie, National Institute for Materials Science, JapanSomekawa Hidetoshi, National Institute for Materials Science, JapanToshiji Mukai, National Institute for Materials Science, Japan

Technology AwardDouglas Granger, Gras Inc., Pennsylvania, USA

Warren Peterson Cast Shop for Aluminum Production AwardMarc Badowski, Hydro Aluminium Deutschland GmbH, GermanyWerner Droste, Hydro Aluminium Deutschland GmbH, Germany

Material Processing & Manufacturing Division Distinguished Service AwardJohn Smugeresky, Sandia National Laboratories, California, USA

Distinguished Scientist/Engineer AwardYuntian Zhu, North Carolina State University, USA

Structural Materials Division Distinguished Scientist/EngineerAwardReinhold Dauskardt, Stanford University, California, USA

Distinguished Service AwardDallis Hardwick, U.S. Air Force

Structured Materials Division JOM Best Paper AwardMarc A. Meyers, University of California, USASirirat Traiviratana, University of California, USAV.A. Lubarda, University of California, USADavid J. Benson, AMSRD-CER-NV-ST-IFT, USAEduardo M. Bringa, Lawrence Livermore National Laboratory, USA

Other Awards

AIME Honorary Membership Y. Austin Chang, University of Wisconsin, Madison, USA

AIME 2009 Rossiter W. Raymond Memorial AwardRajen S.Sidhu, Intel, Arizona, USANikhilesh Chawla, Arizona State University, USA

AIME Robert Earll McConnell AwardDiran Apelian, Worcester Polytechnic Institute, Massachusetts, USA

AIME James Douglas Gold MedalJames C. Williams, Ohio State University, USA

Division Awards


Student EventsTMS 2010 features a number of activities designed to captivate and educate young materials science minds.

Registered student attendees may participate in any of the following events.

Sunday

2010 Materials BowlElimination Rounds ...............................noon to 4 p.m. ......................... Washington State Convention & Trade Center, Room 6CChampionship Round ...........................8:30 p.m. ................................. Washington State Convention & Trade Center, Room 6C

Twelve student teams will not only compete for cash prizes, but will vie for the right to take home the traveling trophy emblazoned with their school name after conquering three rounds of intense, materials science-based trivia questions. In its fourth year, this game show-like event is always a crowd favorite.

Student Networking Mixer ........................................9 to 11 p.m. ............................. Washington State Convention & Trade Center, Room 6B

The TMS Graduate Student Advisory Council (GSAC) invites TMS members to attend the student mixer! As students, we are eager to meet professionals from industry and academia to learn about their experiences in the real world. The student mixer has a welcoming atmosphere that is ideal for informally meeting new people and having friendly conversations. We sincerely hope that members will stop by and attend the mixer

Monday

Poster Judging ...........................................................5 to 6:30 p.m. .......................... Washington State Convention & Trade Center, Exhibit Hall

Undergraduate and graduate students will vie for cash prizes at the annual Student Poster Contest sponsored by the five technical divisions of TMS – Electronic, Magnetic & Photonic Materials; Extraction & Processing; Light Metals; Materials Processing & Manufacturing, and Structural Materials.

Participants in this dynamic and interactive event compete for a $500 prize in each division for the best undergraduate and best graduate poster. A top prize of $1,000 will be awarded for the “Best of Show” poster.

Tuesday

Poster Awards Presentation .....................................Noon ....................................... Washington State Convention & Trade Center, Exhibit Hall

Student Career Forum ...............................................3 to 5 p.m. ............................... Washington State Convention & Trade Center, Room 4C3Organized by the TMS Young Leader Committee, this session will feature speakers hailing from a variety of materials science backgrounds and career stages who discuss how to navigate a career path to ultimate goals. Speaker schedule:

Introduction of Forum and Careers in Policy and Funding AgenciesSpeaker: Eric N. Brown, Los Alamos National Laboratory. .........................................................3 p.m.Careers in Academia: PublicSpeaker: Dallas Trinkel, University of Illinois at Urbana-Champagne. ....................................3:15 p.m.Careers at National LaboratoriesSpeaker: Brad Boyce, Sandia National Laboratory. ...............................................................3:30 p.m.Careers in IndustrySpeaker: Amy Clarke, Caterpillar, Inc. ...................................................................................3:45 p.m.Careers in Academia: PrivateSpeaker: Julia Greer, California Institute of Technology. .............................................................4 p.m.Q&A with Speakers ..............................................................................................................4:15 p.m.TMS LeadershipSpeaker: George T. Gray III (2010 TMS Vice President), Los Alamos National Laboratory. ...4:45 p.m.

Sponsoredby


1�

These new TMS 2010 Annual Meeting books may be purchased on-site at the TMS Bookstore area.

Magnesium Technology 2010Light Metals 2010EPD Congress 2010Energy Technology 2010: Conservation, Greenhouse Gas Reduction and Management, Alternative EnergyJim Evans Honorary SymposiumSupplemental Proceedings: Volume 1: Materials Processing and PropertiesSupplemental Proceedings: Volume 2: Materials Characterization, Computation, Modeling and EnergySupplemental Proceedings: Volume 3: General Paper Selections

Or order online in the TMS Knowledge Resource Center at http://knowledge.tms.org. TMS members receive a discount!

••••••••

Collected Proceedings CD-ROM

A collected proceedings CD-ROM containing all TMS 2010 symposia proceedings is available free of charge for all full conference registrants. This valuable resource offers endless use for future research and educational purposes.

Additional copies of the Collected Proceedings CD-ROM may be purchased in the bookstore and on the registration form and will not be available after the meeting. The cost is $150, with a special student rate of $75. All CD-ROMS must be picked up at the meeting. Shipping is not available.

Proceedings

Think Green … If you will not use this program after the meeting, drop it in the recycling bin before you leave.

�0 LEARN • NETWORK • ADVANCE

TMS �010 Leadership

TMS 2009-10 Board of Directors

Executive CommitteePresident: Ray D. Peterson, Aleris International Inc.Past President:Diran Apelian, Worcester Polytechnic InstituteVice President:George T. “Rusty” Gray III, Los Alamos National LaboratoryGarry Warren, University of Alabama-Tuscaloosa (incoming)Financial Planning OfficerStanley Howard, South Dakota School of Mines and Technology

Functional Area DirectorsProfessional Development:David Shifler, Office of Naval ResearchMembership Student DevelopmentEllen Cerreta, Los Alamos National LaboratoryProgrammingHani Henein, University of AlbertaPublic & Government AffairsKevin J. Hemker, Johns Hopkins UniversityPublicationsElizabeth Holm, Sandia National Laboratories

Technical Division DirectorsElectronic, Magnetic & Photonic MaterialsZi-Kui Liu, The Pennsylvania State UniversityExtraction & ProcessingThomas P. Battle, Midrex TechnologiesLight MetalsJohn N. Hryn, Argonne National LaboratoryMaterials Processing & ManufacturingJames W. Sears, South Dakota School of Mines & TechnologyStructural MaterialsEric M. Taleff, University of TexasDennis M. Dimiduk, Air Force Research Laboratory (incoming)

TMS 2010 Annual Meeting Technical Program Committee

Director/Chairperson:Hani Henein, University of AlbertaPast Chairperson:James C. Foley, Los Alamos National Laboratory

Electronic, Magnetic & Photonic MaterialsDivision Representatives:Long Qing Chen, The Pennsylvania State UniversitySung K. Kang, IBMMark A. Palmer, Kettering University

Extraction & ProcessingDivision Representatives:Boyd R. Davis, Kingston Process MetallurgyJian Li, Natural Resources Canada

Light Metals Division Representatives:Alan A. Luo, General Motors Corp.Eric A. Nyberg, Pacific Northwest National Laboratory

Materials Processing & Manufacturing Division Representatives:Corbett C. Battaile, Sandia National LaboratoriesThomas R. Bieler, Michigan State UniversityAmit Misra, Los Alamos National Laboratory

Structural MaterialsDivision Representatives:Robert J. Hanrahan, Jr., National Nuclear Security AdministrationEric Allen Ott, GE AviationJudy Schneider, Mississippi State University

139th Annual Meeting & ExhibitionFebruary 14-18, 2010 • Washington State Convention Center • Seattle, Washington USA

EX

HIB

IT D

IRE

CT

OR

Y

Fives Solios ... The Premier Green Sponsor of TMS 2010

Exhibition Hours Monday • noon to 6:30 p.m.

Tuesday • 10:30 a.m. to 6 p.m. Wednesday • 10:30 a.m. to 3 p.m.

Table of Contents

Exhibiting Companies ...................................................................................................................22Products and Services Index ........................................................................................................23Exhibition Floor Plan .....................................................................................................................25Company Descriptions .................................................................................................................26Sponsors ..............................................................................................................Inside back cover

22 WWW.TMS.ORG

Exhibiting Companies (as of January 20, 2010)

Company Booth

ABB Bomem ..............................................................................513Advanced Dynamics Corporation, Ltd .......................................115Agilent Technologies ..................................................................404Almeq Norway AS ......................................................................200Aluminum Times ........................................................................511Aluminium International Journal ................................................601ATR National Scientific User Facility ..........................................623B&P Process Equipment ...........................................................401Brochot ......................................................................................337Buss AG ....................................................................................631BUSS Chem Tech ......................................................................226C A Picard Intl ............................................................................314CIMM Group Co., Ltd.................................................................618Claudius Peters Projects Gmb ....................................................213Colt International .......................................................................434Computherm ..............................................................................428Coperion GmbH ........................................................................520CSM Instruments .......................................................................239Cytec Industries, Inc ...................................................................332Dantherm Filtration, Inc .............................................................222DesignMecha Co., Ltd ...............................................................627ECL ............................................................................................308EDAX, Inc ..................................................................................209Eirich Machines, Inc ..................................................................312ELSEVIER .................................................................................109FLSmidth Minerals .....................................................................227Five Solios .................................................................................409Gillespie & Powers, Inc ..............................................................300GLAMA ......................................................................................318Gouda Refractories B.V .............................................................428Harbin Dongshen Metal Co., Ltd ...............................................535Hencon ......................................................................................432Hertwich Engineering ................................................................423Hydro Aluminum Hycast AS ......................................................608Hysitron .....................................................................................400Impec AS ...................................................................................205Innovathem ................................................................................336Innov – X Systems .....................................................................209International Magnesium Association ........................................235Jervis B. Webb Company ...........................................................326Kabert Industries, Inc ................................................................435Kempe Engineering ...................................................................223Life Cycle Engineering ...............................................................534Light Metal Age ..........................................................................233L.P. Royer, Inc ............................................................................505Magnesium Elektron ..................................................................437Major ..........................................................................................301

Company Booth

Metallurgical Society of CIM (MetSoc) ......................................315Microtrac ....................................................................................629Mid-Mountain Materials, Inc ......................................................101Momentum Press ......................................................................221Nalco .........................................................................................516National Institute of Standards & Technology ............................604NIST Technology Innovation Program .......................................602NFC ...........................................................................................421OKAYA, (USA) Inc .....................................................................218OLI Systems, Inc .......................................................................504Olympus America, Inc ...............................................................210Opsis .........................................................................................514Outotec ......................................................................................319Precimeter .................................................................................201Proto Manufacturing, Inc ...........................................................519Riedhammer GmbH ...................................................................215Rio Tinto Alcan ..........................................................................309Sente Software, Ltd ...................................................................414Shanghai Zhengyu Special Alloys Co., Ltd ................................208Shimadzu Scientific Instruments, Inc .........................................633STAS ..........................................................................................509Sunstone ...................................................................................230Techmo Car S.p.A ......................................................................310Thermo-Calc Software, Inc ........................................................100Thermo Scientific .......................................................................523Thermo Scientific Niton Analyzers.............................................622Windhoff Bahn-und Anlagentechnik GmbH ...............................521

Exhibiting Companies


23EXHIBIT DIRECTORY

Advanced MaterialsCompu Therm Hysitron Magnesium Elektron Mid Mountain Materials, Inc. NIST Technology Innovation Program Proto Manufacturing, Inc. Sente Software, Ltd.

Advanced ProcessingCytec Industries, Inc. DesignMecha Co., Ltd. FL Smidth Minerals Innovatherm Momentum Press Nalco NIST Technology Innovation Program Olympus America, Inc. Proto Manufacturing, Inc. Rio Tinto Alcan Sente Software, Ltd. Thermal Technology LLC

AluminumAdvanced Dynamics Corporation, Ltd. Almeq Norway AS ALUMINIUM International JournalAluminium Times Aluminum International Today B&P Process Equipment China Nonferrous Metal Industry’s Foreign Engrg & Construction Co., Ltd. (NFC) Claudius Peters Projects GmbH ECL Farra Engineering, Ltd. Fives Solios FLSmidth Minerals Gouda Refractories B.V. Harbin Dongsheng Metal Co., Ltd. Hencon Hydro Aluminum Hycast AS Impec AS Industrial Initiatives and ProjectsJervis B Webb Co. Kempe Engineering Life Cycle Engineering Light Metal AgeLP Royer, Inc. Metallurgical Society of CIM (MetSoc) Mid Mountain Materials, Inc. National Institute of Standards and Technology OKAYA, (USA) Inc

Opsis Outotec Canada, Ltd. Riedhammer GmbH Rio Tinto Alcan Techmo Car SpA Thermo Scientific Thermo Scientific Niton Analyzers Thermo-Calc Software Inc.

Aqueous ProcessingFLSmidth MineralsNalco

CeramicsEirich Machines, Inc. Gouda Refractories B.V. Hysitron National Institute of Standards and Technology

CharacterizationCSM Instruments Hysitron Innov - X Systems Micro Materials, Ltd. Momentum Press Proto Manufacturing, Inc. Thermo Scientific Thermo Scientific Niton Analyzers

CompositesHysitron

Computer Applications and Process ControlABB Inc Innovatherm ProQuest Thermo-Calc Software, Inc.

Copper Nickel and CobaltAdvanced Dynamics Corporation, Ltd. China Nonferrous Metal Industry’s Foreign Engrg & Construction Co., Ltd. (NFC) Metallurgical Society of CIM (MetSoc) National Institute of Standards and Technology Techmo Car SpA Thermo Scientific Niton Analyzers Thermo-Calc Software, Inc.

EducationInitiatives Et Projets Industriels SARL Life Cycle Engineering Momentum Press Olympus America, Inc. Thermo-Calc Software, Inc.

ElectrometallurgyABB Inc Industrial Initiatives and ProjectsNational Institute of Standards and Technology Proto Manufacturing, Inc.

Electronic MaterialsABB, Inc. National Institute of Standards and Technology

EnergyCompu Therm Life Cycle Engineering Nalco NIST Technology Innovation Program Olympus America, Inc.

Environmental EffectsECL Nalco Opsis Rio Tinto Alcan

Environmental IssuesECL Eirich Machines, Inc. Industrial Initiatives and ProjectsInnov - X Systems Innovatherm Metallurgical Society of CIM (MetSoc) Mid Mountain Materials, Inc. Nalco National Institute of Standards and Technology Opsis

Experimental MethodsHysitronThermal Technology LLCThermo Scientific

Products and Services Index

24 WWW.TMS.ORG

Extraction and ProcessingB&P Process Equipment FL Smidth Minerals Kempe Engineering Nalco Rio Tinto Alcan Thermo-Calc Software, Inc.

FundamentalsIndustrial Initiatives and Projects

High-Temperature MaterialsCompu Therm Gouda Refractories B.V. Kabert Industries, Inc. Mid Mountain Materials, Inc. National Institute of Standards and Technology Sente Software, Ltd.

Iron and SteelAdvanced Dynamics Corporation, Ltd. Hysitron Life Cycle Engineering Metallurgical Society of CIM (MetSoc) National Institute of Standards and Technology OKAYA (USA), Inc. Sente Software, Ltd. Thermo Scientific Thermo-Calc Software, Inc.

JoiningThermo-Calc Software, Inc.

Lead Zinc and TinAdvanced Dynamics Corporation, Ltd. China Nonferrous Metal Industry’s Foreign Engrg & Construction Co., Ltd. (NFC) National Institute of Standards and Technology Techmo Car SpA

Lightweight MaterialsABB Inc Advanced Dynamics Corporation, Ltd. International Magnesium Association Light Metal AgeMagnesium Elektron National Institute of Standards and Technology Sente Software, Ltd.

MagnesiumAdvanced Dynamics Corporation, Ltd. International Magnesium Association Light Metal AgeMagnesium Elektron Techmo Car SpA

Manufacturing and MarketsAdvanced Dynamics Corporation, Ltd. Almeq Norway AS C A Picard Intl Claudius Peters Projects GmbH Coperion GmbH CSM Instruments DesignMecha Co., Ltd. Gouda Refractories B.V. Harbin Dongsheng Metal Co., Ltd. Hencon Industrial Initiatives and ProjectsInnovatherm Kempe Engineering Life Cycle Engineering National Institute of Standards and Technology NIST Technology Innovation Program Olympus America, Inc. Outotec Canada, Ltd. Rio Tinto Alcan SunStone

Mechanical PropertiesCSM Instruments DesignMecha Co., Ltd. Hysitron Micro Materials, Ltd. Sente Software, Ltd.

MineralsChina Nonferrous Metal Industry’s Foreign Engrg & Construction Co., Ltd. (NFC) Claudius Peters Projects GmbH Coperion GmbH Cytec Industries, Inc. FL Smidth Minerals Hencon Innov - X Systems OKAYA (USA), Inc.

Modeling and SimulationAdvanced Dynamics Corporation, Ltd. Compu Therm ECL NIST Technology Innovation Program Thermo-Calc Software, Inc.

Molten Metal and SolidificationAdvanced Dynamics Corporation, Ltd. Harbin Dongsheng Metal Co., Ltd. Hencon Hydro Aluminum Hycast AS Outotec Canada, Ltd. Thermo-Calc Software, Inc.

NanotechnologyCSM Instruments Hysitron Micro Materials, Ltd. Momentum Press National Institute of Standards and Technology NIST Technology Innovation Program

Nontechnical TopicsDesignMecha Co., Ltd.

Nuclear MaterialsNational Institute of Standards and Technology

Other NonferrousCytec Industries, Inc. International Magnesium Association OKAYA (USA), Inc. Outotec Canada, Ltd.

Physical PropertiesHysitron Micro Materials, Ltd. National Institute of Standards and Technology Proto Manufacturing, Inc. Sente Software, Ltd.

PolymersCytec Industries, Inc. Hysitron Momentum Press Nalco National Institute of Standards and Technology

Products and Services Index


25EXHIBIT DIRECTORY

Powder TechnologyB&P Process Equipment Claudius Peters Projects GmbH Coperion GmbH Magnesium Elektron Thermal Technology LLC

Precious MetalsEirich Machines, Inc.Innov - X Systems

Process MineralogyClaudius Peters Projects GmbH Cytec Industries Inc.

PyrometallurgyChina Nonferrous Metal Industry’s Foreign Engrg & Construction Co. Ltd. (NFC) Metallurgical Society of CIM (MetSoc)

Recycling and Secondary RecoveryEirich Machines, Inc. Hencon Kempe Engineering Nalco Thermo Scientific Niton Analyzers

Shaping and FormingGouda Refractories B.V.

Surface Modification and CoatingsDesignMecha Co., Ltd. Micro Materials, Ltd. Olympus America, Inc.

Synthesis and ProcessingNIST Technology Innovation Program Thermal Technology LLC

TitaniumInnov - X Systems National Institute of Standards and Technology Techmo Car SpA Thermo Scientific Thermo Scientific Niton Analyzers Thermo-Calc Software, Inc.

UP

DO

WN

21

UP

DO

WN

10

DOWN

UP

Exi

t

54

Exi

t

Exi

t

3

WSCTC Use

Del

i

Truc

k Ram

p To

Hubbe

ll Pl

.

NorthLoading Dock

STAIRCASE

Outdoor Plaza

Exit

SouthLobby

Up To 5 & 6

Exit

ExitExit

GRAND

Exit

South Service Corridor

Slope Down

Security

Flo

ors

1 to

4

SouthGalleria

ExitExit

M W

4C-4

4C-3 4C-2

4C-1

439 438

4D

North Service Corridor

Exit

Hotel Tower

M W

Del

i

To/FromLevel 3

Exi

tExit

W M

M

400

490

492

To S

outh

Lob

by

1211

NorthLobby

401

6 7

M

Exit

To/From4 & 6

Balcony Line Above

Exit

SouthLoadingDock

ExitExitDeliExit

ExitDeliExit

4C

4E

4F

4B 4AW

Open

Pike Street(Below)

MWExit

Pine Street (Below)

8th

Ave

nue

(Bel

ow)

Exi

t

Ret

ail

Exi

tE

xit

9th

Ave

nue

(Bel

ow)

Truck Bridge

Exi

t

454

N

W

MW

Exi

t

498

N-2

N-1

WSCTC Use

To North Lobby

Floor Plan

REGISTRATION

REGISTRATION

Office/Storage

Membership &Publications

3Mx3M

3Mx3M

ES Office

Sales Office

30'

27'

Free

man

Ser

vice

Des

kC

ontr

acto

rsS

ervi

ce D

esk

100 101

20'102

107

109

111

113

115

117

119

121

20'

127

129

131

200

20'

201

20'

205

206

20'209

210 211

212 213

215

218 219

220

20'

221

223

20'

226

20'

230

233

235

237

300

30'

308 309

20'

20'310

312

314 315

318

20'

319

20'

30'

326

20'

327

329

332

20'

333

335

336 337

20'

409

20'

20'

414 415

20'

419

427

49'

30'Activity Area

435

437

501

20'

505

509

511

513

20'514

519

520

20'

521

523

534 535

536 537

600 601

20'602

604

607

20'608

20'

612

614 615

617

618

620

622

627

629

631

633

635

637

6Mx6M

ExhibitorShow Office

6Mx6M

boneyard

Lounge

56 - POSTER BOARDS

Dimension10'x10'10'x20'10'x30'20'x20'20'x30'30'x49'

Qty8922

2311 NORTH

F

OMEN MEN

EXIT

GATE 7

CWF

MENMEN

FFHCFE

F

CWF

COATS

SHOWUP TO 5

EXIT

EXIT

EXIT

DOWN

UP

WOMEN

ESCALATORSFLOORS 4 & 6

ONLY

EXIT

MEN

F

CWF

MENSHOW

UP TO 5

UP TO 5 & 6

EXIT

EXIT

EXIT

PHONESPUBLICPUBLIC

PHONES

GATE 5

FHCFE

FF

FHCFE

EXITEXIT

FFEFHC

GATE 4EXIT

F

FHCFE

CWF

USEWSCTC

EXIT

GA

PUBLICPHONES

WOMEN

EXIT

EXIT

GATE 10

FHCFE

FEF

FHC

RES

4

EXIT

PUBLICPHONES

USEWSCTC

WATERHOSE

LE

GATE 1

WSCTCUSE

USEWSCTC

GATE 2

FHCFF

FHCF

FHCFE

FHCFE

EXIT

EXIT

L "B" WALL "C"

OM

OM

5" High Low Curb,Located 12" From The Window

EXITEXIT F

47-1/4" High

214

216

135

20'

20'

227

229

301

303

305 404

400

20'

426

428

432

434

504

401

30'

500

20'

516

518

421

20'

634

636

611

613

619

621

623

CyberPod

CyberPod

TMS 2010 Bookstore Area

Booth BBooth A Booth C

TMS 2010 Annual Meeting & ExhibitionFebruary 2010

Washington State Convention & Trade Center

New on the Exhibit Floor!

TMS Student Poster Competition

Exhibit Hall Booth 427 View posters during the President’s

Welcoming ReceptionWinners will be announced Tuesday at noon.

General Poster SessionExhibit Hall Aisle 100During Exhibit Hours

Lamborghini ViewingExhibit Hall Booth 135

During Exhibit Hours

President’s Welcoming Reception

Monday from 5 to 6:30 pm

Exhibit Hall Happy HourTuesday from 5 to 6 pm

26 WWW.TMS.ORG

Company DescriptionsABB, Inc. (Quebec, QC Canada) Booth# 513 • www.abb.com/analyticalABB Analytical Business Unit designs, manufactures and markets high-performance analytical system solutions and spectroradiometers for petroleum, chemi-cal, life science, semiconductor, metallurgy and remote sensing/aerospace markets. Building on its 37 years of experience in analytical instrumentation, the company, through a dedicated team of engineers, offers you the best solutions with its complete range of reliable analytical instruments for inclusions and dissolved hydrogen measurement: AlSCAN, LiMCA II, LIMCA CM, Prefil®-Footprinter, PoDFA and Metallographic Analysis Service.

Advanced Dynamics Corporation, Ltd. (St. Bruno, QC Canada)Booth #426 • www.advanceddynamics.comFor over four decades, Advanced Dynamics (ADCL) has supplied our global customer base with state-of-the-art material handling systems for carbon plants and cast houses. Our handling technology includes fully automated or semi-automated equipment for anode handling and cleaning, aluminum ingot and T-Bar handling, sawing and packaging systems. We also have experience in specialty systems for the magnesium, copper, zinc, steel and lead industries.

ADCL is a one-stop shop for your material handling needs, including mechanical and controls engineering, fabrication, assembly, test and commissioning. Whether you need a new system, or upgrades to existing systems, or simply individual pieces of equipment, we can help improve your company’s productivity. Remember “our ingenuity delivers productivity” – when you think of ADCL for your next project.

Agilent Technologies (Chandler, AZ)Booth #404 • www.agilent.com/fina/nano

Almeq Norway AS (Langhus, Norway)Booth #200 • www.almeq.comALMEQ Norway AS is an engineering, marketing and production company offering a wide range of equipment to the primary aluminium industry. The focus is on crucible and potshell repair shops. In addition to its own designed equipment, ALMEQ is an exporter and marketing partner for other renowned suppliers.

Among the equipment engineered and produced in Norway are the Crucible Cleaning Machine, Tube Cleaning Machine, Pot Lining Machine, Electric Cathode Preheater, electric drying and preheating systems for crucibles and various potroom equipment.

At TMS 2010, ALMEQ will focus on the Cathode Preheating system and Potlining Machine. We will also display our 3D construction tools, which enable us to show specific details of our equipment.

Aluminium Times (Shoreham By Sea, Great Britain)Booth #511Aluminium Times publishes five times a year, serving primary and secondary aluminium producers, rolling mills and extruders throughout the world. The magazine is free to aluminium operators involved in the purchase chain of equipment and materials.

Aluminium Times promotes, through its editorial pages, the aluminium equipment and consumable supplier with editorial features. Each issue contains news, views, features and both company and people profiles. Aluminium Times publishes the industry wall maps and directories. The Aluminium Primary Smelter Map and Directory, for example, is published each July. Published by Modern Media Communications Limited, two sister magazines are Cast Metal & Diecast-ing Times and Iron & Steel Today.

ALUMINIUM International Journal (Germany)Booth #601 • www.giesel-verlag.de

Aluminium International Today (Great Britain)Booth #212 • www.aluminiumtoday.comALUMINIUM International, journal for industry, research and applications, is the leading international journal (bilingual: German/English) for more than 80 years. It covers everything that concerns the material, its extraction, processing, recycling and applications. Matters of economics and the ecological conse-quences of using aluminium are also considered. The scope of the month-by-month reporting includes scientific contributions and condensed information about new technologies and applications. The journal addresses aluminium producers, semis manufacturers, foundries, processors, metal and semis traders and, not least, research institutes concerned with aluminium. ALUMINIUM is circulated in over 40 countries worldwide – made in Germany, distributed to the world.

ATR National Scientific User Facility (Idaho Falls, ID)Booth #623 • www.inl.gov

Company Descriptions


27EXHIBIT DIRECTORY

B&P Process Equipment (Saginaw, MI)Booth #401 • www.bpprocess.comB&P Process Equipment (manufacturers of Baker Perkins machinery) is a supplier of specialized process equipment for the production of carbon paste, energetic materials, plastics, industrial chemicals, and for chemical separation. Many pieces built since the 1930s are still in service. In 1952, the aluminum industry production requirements grew, and the continuous kneader became the preferred method of manufacturing carbon paste. Today, our batch mixers and continuous kneaders are used worldwide in the production of carbon paste. B&P also offers a complete line of continuous pusher centrifuges for liquid/solid separation. B&P also has a joint venture with Battaggion S.R.L., headquartered in Bergamo, Italy, for a broad line of mixing equipment.

Brochot (Tremblay-en-France Cedex, France)Booth #337 • www.brochot.fr

Buss AG (Pratteln, Switzerland)Booth #631 • www.busscorp.com

BUSS ChemTech (Prattein 1, Switzerland)Booth #226 • www.buss-ct.com

C A Picard Intl (Remscheid, Germany)Booth #314 • www.capicard.comCarl Aug Picard International specializes in the manufacture of high quality wear parts for continuous kneaders for the manufacture of green anodes used in the primary aluminum industry. Picard manufactures kneading teeth, wearing plates/liners and screw flights out of different, highly wear-resistant qualities.

China Nonferrous Metal Industry’s Foreign Engrg & Construction Co. Ltd. (NFC) (Beijing, China)Booth #421 • www.nfc.com.cnFounded in 1983, China Nonferrous Metal Industry’s Foreign Engineering & Construction Co., Ltd. (NFC) is a state-owned holding company listed on Shen-zhen Stock Exchange. As a leading Chinese enterprise engaged in general contracting of overseas nonferrous metal (particularly in aluminum, copper, zinc and etc.) projects and resources development, it covers a wide spectrum from technical assistance, engineering design, equipment manufacturing, construc-tion, supervision, installation and training to mining, beneficiation, smelting, processing, etc. It has also been listed on ENR as one of the top 225 international contractors and the top 200 international design firms for consecutive years. In 2007, NFC was awarded ISO 9001 Quality Management System certification. In 2008, NFC was awarded ISO 14001 EMS and OHSMS 28001 certification. With competitive edges in technology and rich experience in EPC contracting, NFC has consistently been dedicated to the global nonferrous metal industry, based on long-standing commitment to good faith and innovation, in the pursuit of excellence. NFC is capable and willing to work with world partners by providing a portfolio of services including technologies, equipment supply and project management.

CIMM Group Co., LTD (DaLian, China)Booth #618 • www.cimmuk.comCIMM GROUP is a professional manufacturer, international trade and service provider, and an EPC company engaged in the field of Aluminum, Iron & Steel, Mining and Beneficiation, Petrochemical industry. Our key products are: Aluminum Fluoride, Prebaked Anode, Copper Mould Tube and Material Handling System etc.

VISIONBased on technology, engineering and EPC project, we envision strengthening energy and resource businesses, integrating business sectors of science, industry and trading, to build up a multinational enterprise group of the first class in the world; embracing the great power of love and friendship, making our contributions to the happier homes of prosperity and peace for mankind.

MISSIONLet the world share the first-class equipment, technology and services of China; let China share the first-class equipment, technology and services of the world; let the world share the progress and civilization of mankind; let mankind share the peace and prosperity of the world.

Claudius Peters Projects GmbH (Buxtehude, Germany)Booth #213 • www.claudiuspeters.comClaudius Peters Projects GmbH, is headquartered in Buxtehude, near Hamburg, Germany, own manufacturing and R&D, with regional offices in the Ameri-cas, Europe, China and the Far East. Claudius Peters Projects offers technologies in the field of material handling and processing, together with turnkey and semi-turnkey systems to a wide range of industries such as aluminium, cement, gypsum and other bulk industries and coal grinding plants, coal pulverizing and injection systems for the global steel industry. Claudius Peters Projects GmbH is a wholly subsidiary of Langley Holdings plc, a privately controlled U.K. engineering group.

28 WWW.TMS.ORG

Company DescriptionsColt International (Cuijk, Netherlands)Booth #434 • www.coltgroup.comCOLT : YOUR SPECIALIST IN GRAVITY VENTILATIONColt is a global supplier and manufacturer of natural and mechanical ventilation systems.The principal activity of Colt is the supply of specialist products and systems in the field of building services with particular emphasis on gravity ventilation and the environmental control of industrial and commercial buildings. Specially for the aluminium industries , Colt is supplier of Static roof Ventilators and air intake louvers for potroom buildings, anode bake buildings and cast houses.

Compu Therm (Madison, WI)Booth #428 • www.computherm.com CompuTherm, LLC, expertise in thermodynamics and kinetics, develops computational tools for industrial applications in the broad field of materials science and engineering. In addition, we provide consulting services to materials industries and collaborate with other institutions working on challenging programs. Current products include Pandat, PanEngine, PanOptimizer, PanPrecipitation, PanAl, PanTi, PanNi, PanFe, PanNb, and PanMg. Pandat is a robust, user-friendly software package for multi-component phase diagram calculations. PanEngine is the engine of Pandat, which can be integrated with user’s codes to create custom applications. PanOptimizer is used to optimize thermodynamic, kinetic and thermo-physical model parameters from known experimental or calculated data. PanPrecipitation is a kinetic module designed for simulating precipitation kinetics during heat treatment processes. The last six products are multi-component thermodynamic databases for Al, Ti, Ni, Fe, Nb, and Mg, respectively. Coperion GmbH (Weingarten, Germany)Booth #520 • www.coperion.comCoperion GmbH is the competent partner for all bulk materials handling solutions around and within the smelter. The company offers solutions to the aluminium producing industry that have proven to be extremely efficient and reliable. The company supports its customers from the first project concept through a wide range of services for realization and the start-up of bulk materials plants. Those services include retrofit solutions and valuable after-sales support. Coperion has the necessary expertise for every process stage along the entire process chain in manufacturing of primary alumina. In each process step, the challenges demand plenty of experience, specialist competence and flexibility.

CSM Instruments (Needham, MA)Booth #239 • www.csm-instruments.comCSM Instruments has been a leader in the development of instruments for advanced materials testing for over 30 years. Our products include hardness testers, scratch testers, and tribometers of varying load ranges. 3D-imaging options are available with the ConScan or AFM objective.

Our focus on research and development helps us to continue our tradition of cutting edge technology and superior performance specifications. We manufac-ture testing modules that can be configured alone or combined together on a testing platform for a single instrument capable of multiple analysis modes.

In the design of our instruments, we integrate the testing module(s) with imaging module(s) for a seamless testing and imaging process. The modules and microscopes are positioned and synchronized so the instrument automatically moves the point of interest under the appropriate imager with a single click. It also allows us to correlate an optical coating failure (like cracks) to the exact force, depth, and frictional force… that was occurring at that time.

Additionally, we have a thorough sample testing service laboratory.

Cytec Industries Inc. (Prairieville, LA)Booth #332 • www.cytec.comCytec collaborates with alumina companies to optimize their operations through the delivery of innovative chemical technologies. We utilize our superior ap-plication expertise to develop solutions based on our customer’s specific needs. We offer technologies that:

Decrease the cost of operations Allow the processing of problematic bauxitesPrevent or limit employee’s exposure to hazardsOptimize the use of natural resourcesMinimize waste and re-toolingDo not require on-staff scientists or engineers

Cytec is committed to partnering with our customers to meet their needs. Our network of technical staff provides on-site technical assistance worldwide. We are dedicated to on-time delivery, even to the worlds harder to reach areas. Our unique approach to servicing our customers has made Cytec the leading provider of reagents to the mining industry.

••••••


29EXHIBIT DIRECTORY

DesignMecha Co., LTD (Asan, Korea South)Booth #627 • www.designmecha.co.kr

ECL (Ronchin, France)Booth #308 • www.ecl.frWith more than 60 years experience, ECL is the world leading smelter equipment manufacturer and is 100% dedicated to the Aluminium Industry. ECL offers complete solutions for the smelter’s reduction, carbon, and metal sectors.

From design, manufacturing and erection, through training, maintenance, audit, and refurbishment, ECL provides products and services adapted to the needs and demands of its customers for any reduction technology.

A high level of innovation and an unmatched expertise allow ECL to offer solutions for single machines or complete turnkey projects, which help aluminium smelters in their productivity and EHS efforts.

EDAX Inc. (Mahwah, NJ)Booth #209 • www.edax.comEDAX provides Results with the Greatest Confidence. EDAX has led the industry as the technical innovator and the world’s largest supplier of EDS, EBSD and WDS systems. EDAX integrates these latest technologies in its Trident system. Accurate analytical results require solid foundations and EDAX is the only company to achieve this through Expert ID and the Genesis EDS Apex system. The new Genesis Apex microanalysis system offers superior performance us-ing fundamental physics, rule-based element identification and automated background calculation. EDAX’s EBSD Data Collection provides a powerful, easy to use environment for acquiring EBSD data in the SEM. The EBSD Analysis has virtually unlimited potential for interrogating the wealth of information contained in EBSD data. EDAX offers detector solutions to meet all your EBSD needs. The Hikari Detector is a completely integrated CCD-based detector optimized for high speed data collection. Combined with the power of WDS to enhance qualitative and quantitative analysis, EDAX provides today’s scientists with the ultimate materials characterization solution, offering vastly improved speed and accuracy.

Eirich Machines Inc (Gurnee, IL)Booth #312 • www.eirich.comEirich Machines Inc. of Gurnee, Illinois, is a manufacturer of the Eirich Intensive Mixer, noted for the many advantages it provides the metallurgy industries. Eirich has been providing machines and complete plants to the carbon industry for more than 30 years. A constantly growing number of renowned manufactur-ers of carbon products all over the world are currently using Eirich equipment. We offer the latest state-of-the-art technology for coke heating, mixing and re-mixing/cooling of pre-bake and Söderberg anode paste. The capacities of our batchwise and continuous systems range from 10 to nearly 60 tons/hour in a single line. Our latest development is the Eirich Intensive Mixing Cascade (EMC) for the all-intensive preparation of anode paste at the lowest cost and the highest efficiency. For more information on our capabilities, please visit us in booth #312. ELSEVIER (New York, NY)Booth #327 • www.elsevier.comAs the world’s leading publisher of science and health information, Elsevier serves more than 30 million scientists, students and health & information pro-fessionals worldwide. Elsevier is committed to making genuine contributions to the science and health communities by providing: World-Class Information: Elsevier publishes trusted, leading-edge Scientific, Technical and Medical (STM) information; Global Dissemination: Elsevier disseminates and preserves STM literature to meet the information needs of the world’s present and future scientists and clinicians - linking thinkers with ideas; Innovative Tools: Elsevier develops electronic tools that demonstrably improve the productivity and outcomes of those we serve; Working Together: Elsevier works in partnership with the communities we serve to advance scholarship and improve lives. Visit the Elsevier booth #109 to meet our representatives and learn more about our products. For the latest from Elsevier’s Materials Science research publications, download our Materials Science RSS feed at: www.elsevier.com/materials.

Fives Solios (St Germain En Laye, France)Booth #409 • www.fivesgroup.comAs a leading manufacturer, Fives Solios designs and supplies process equipment and turnkey plants for main aluminum producers worldwide for these areas: Reduction area: gas treatment centers and bath processing plants—Fives Solios is well known for providing high quality equipment in terms of performance, reliability, and ease of maintenance. Carbon area: green anode plants including carbon butts processing and pitch fume treatment systems, pitch storage and processing, and firing systems and fume treatment centers for anode baking furnaces—Fives Solios has also developed innovative solutions such as Rhodax for dry material preparation, IMC for paste preparation, Xelios for anode forming, and Eolios for pitch fume treatment. Cast house area: melting and holding furnaces including water cooling systems as well as integration of downstream casting machines and heat treatment furnaces for rolling mills and associated control systems. For more information on Fives Solios, visit www.fivesgroup.com.

30 WWW.TMS.ORG

Company DescriptionsFLSmidth Minerals (Salt Lake City, UT)Booth #415 • www.flsmidthminerals.com FLSmidth is your major equipment supplier from bauxite mining and refining through calcination and smelting. Every day, worldwide, our equipment crushes, conveys, grinds, digests, clarifies, precipitates, stores, and calcinates bauxite to produce alumina. Combining the respected brand names of MÖLLER, KOCH-MVT, FULLER-TRAYLOR, WEMCO, EIMCO, DORR-OLIVER, PNEUMAPRESS, KREBS, ABON, RAHCO, CEntry, Conveyor Engineering and EXCEL, FLSmidth offers a broad range of equipment and processes while increasing recoveries, lowering energy consumption, and providing proven reliability. We also offer metallurgical testing utilizing the expertise of FLSmidth Dawson’s metallurgical laboratories. FLSmidth is your “One Source, One Partner” providing integrated solutions that will save valuable time on project schedules!

Gillespie & Powers Inc (St Louis, MO)Booth #300 • www.gillespiepowers.com

GLAMA (Gladbeck, Germany)Booth #318 • www.glama.de

Gouda Refractories B.V. (Gouda, Netherlands)Booth #305 • www.goudarefractories.comGouda Refractories is an innovative refractory producer (refractory bricks, castables, mortar, self-flowing castables, complex pre-cast shapes) with global experience and a long track record of supplying superior quality refractories all over the world, combined with innovative installation technology for more than 100 years. Gouda Refractories develops, manufactures, sells and installs top quality refractory linings. Gouda’s solutions play an important role in non-ferrous metal (mainly aluminium), petrochemical, environmental and energy industries. Based on an industry-oriented structure and highly competent employees, Gouda Refractories guarantees an optimal support, which results in efficiency and reduction of refractory cost. Gouda Refractories supplies total solutions to customers which are cost effective, state of the art, and reliable. Gouda’s R&D department is conducted in close co-operation with its customers and renowned research institutes. Gouda’s quality assurance is based on the international ISO 9001 standard.

Harbin Dongsheng Metal Co., Ltd. (Harbin, China)Booth #535 • www.sinodongsheng.comWe focus on producing aluminium alloying material (hardener) in the aluminium castinghouse. Our products are as follows: Alloying Tablets and Mini-tablet, for the precise compositional adjustment of Mn, Fe, Ti, Cr, Cu and Ni additions to the aluminium bath; Fast Melting Silicon; ALTi,ALV;other Master Alloy. We are the designers of China National Standard of Alloying Tablet. We also have three plants, already one of the biggest alloying tablets producers in China. We are the long term supplier of these famous aluminium companies. Finally, we have the honor to be the raw material supplier of China Shenzhou airship man-in-space flight project.

Hencon (Ulft, Netherlands)Booth #432 • www.hencon.nlHENCON: Your Global PartnerBacked by more than 50 years of experience, Hencon is a worldwide supplier of services and mobile processing equipment for potroom and cast house. In addition to our main plant located in the Netherlands, Hencon has production and service facilities in South Africa, Mozambique, Russia and India. The delivery program covers the complete range of vehicles and vacuum technology equipment needed in potroom and cast houses. In our booth, you will find our new developments with regards to vehicles that reach the latest HSE standards and contribute to the efficiency of primary smelters and cast houses. You will also find our new product line of vacuum technology solutions (mobile and stationary) for the recovery of valuable materials in processing plants and mines. Our services include the support of (start up) customers complete with know-how, repairs and parts geared to specifics for the maintenance of industrial vehicles in an aluminium production environment. Within the group, Hencon Alumina, along with its partners Alcor Technology and Alfa Laval, is producer and supplier of M2M-Unit, which enables alumina refineries to recover remaining alumina values from bauxite residue.

Hertwich Engineering (Toledo, OH)Booth #423 • www.hertwich.com Hydro Aluminum Hycast AS (Sunndalsora, Norway)Booth #608Hycast is a subsidiary of Hydro Aluminium. Hycast’s principle task is to ensure a leading edge for Hydro Aluminium in melt refining and casting technology. The annual turnover for Hycast approximates USD 16-20 mill. Hycast has extensive expertise in aluminium cast house technology. Key competencies include project management, as well as metallurgical, mechanical and electrical (automotive and process control) engineering. Activities within these areas are performed internally, while supplementary services are recruited from selected external partners.Experience has been gained over several years through col-laboration not only with Hydro but also with other aluminium companies in numerous projects world-wide. Many involved turnkey supplies, with Hycast being responsible for supervision, installation, commissioning and testing of all equipment and systems supplied. Technology development projects in cooperation with Hydro’s R&D and Cast House Support Departments resulted in further competitive advantages. Beginning in November 2009, Hycast’s technology and expertise are also available to customers outside Hydro Aluminium.


31EXHIBIT DIRECTORY

Hysitron (Eden Prairie, MN)Booth #400 • www.hysitron.com As world leader in nanomechanical testing, Hysitron is dedicated to providing testing solutions for nanoscale mechanical characterization. Hysitron’s nano-mechanical test instruments provide high-speed in-situ SPM imaging in addition to the quantitative measurement of many mechanical properties, including hardness, modulus, fracture toughness, and wear resistance. Our instruments feature advanced techniques such as nanoDMAÿ for time dependent and viscoelastic materials, Modulus Mapping for quantitative large area property mapping, and nanoECRÿ enabling simultaneous electrical and mechanical property measurements. We are excited to demonstrate the TI 950 TriboIndenterÿ nanomechanical test system featuring 25x faster feedback, a nanoNewton to Newton force range, and an unprecedented <30nN noise floor. Stop by our booth to see how the TI 950 redefines the world of nanomechanical testing. Hysitron will also be showcasing the PI 95 and PI 85 PicoIndenterÿ, the truly quantitative depth-sensing indenters capable of direct-observation testing inside a TEM and SEM. Impec AS (Ovre Ardal, Norway)Booth #205 • www.impec.noImpec AS is an innovative supplier of equipment for rodding shops and pot rooms. For more than 30 years, Impec has proven to be a reliable partner for aluminium smelters in operation, maintenance and supplies. We use our experience and process knowledge to design new products based on established technology. This ensures our equipment is designed to fulfill all aspects of rodding shop: process optimization; high quality, reliable products with long lifetimes; low costs in operation and maintenance. Impec has developed and improved a number of new machines all in operation in smelters showing good operation and focus on maintenance. Impec is situated in Norway just outside a Hydro Aluminium smelter. We work on a daily basis with the aluminium industry in Nor-way, and we are familiar with the industry’s demands and needs. The company has so far performed a number of successful projects in the aluminium industry. IMproving Process EffiCiency, the IMPEC way.

Industrial Initiatives and Projects (LA BUISSE, France)Booth #419

Innov - X Systems (Woburn, MA)Booth #206Stop by to check out our handheld XRF with automated GPS-XRF. Handhelds (4W) come equipped with weather-proof, ultra-rugged integrated PC control or our classic removable PDA. Optional vacuum (light element) or camera attachments are available. Our Portable Closed-beam X-50 (10W) operates at up to 25 times the power of most handhelds for solids or liquids. Our handhelds and X-50’s are available with Si Pin diode or Si Drift detectors. Applications: Ge-ology, Environmental, Metals & Mining, RoHS & Consumer Regulations (Pb, Hg, As, Cr, Cd) and More. Learn about our Academic Relations Grant program. Innov-X: Home of portable XRF for on-site, in-situ analysis of Mg-U; ppm to 100%.

Innovatherm (Butzbach, Germany)Booth #336 • www.innovatherm.com

International Magnesium Association (Wauconda, IL)Booth #235 • http://www.intlmag.org/index.cfmFounded in 1943, the International Magnesium Association (IMA) is the global voice of the magnesium industry. Its mission is to promote the use of the metal magnesium and to educate both manufacturers and consumers about the numerous options and benefits metal magnesium provides. IMA’s members consist of: primary producers of the metal and its alloys, recyclers, foundries, fabricators, end users and suppliers. The IMA serves the industry and its membership through its Annual World Magnesium Conference and other workshops and seminars held worldwide. Other services include: industry advocacy, statistical programs and publications. Jervis B Webb Co (Farmington, MI)Booth #326 • www.jerviswebb.comWebb Aluminium Group, an alliance comprised of Jervis B. Webb Worldwide Company, Webb Australia and Webb-India, has more than 50 years experience providing turnkey systems for aluminium carbon plant production. Our global workforce and advanced technology has made us a leading provider for alu-minium companies such as Alcoa, BHP Billiton, Norsk Hydro, Rio Tinto and more. Whether you’re constructing a new facility or upgrading an existing plant, Webb Aluminium Group will work with you to design a system that meets your specific needs. We offer cost-effective products and services for your entire carbon plant - from the paste plant to the baking furnace to the rodding shop. Webb Aluminium Group is your single-source supplier for carbon plant produc-tion systems.

Kabert Industries Inc (Villa Park, IL)Booth #435 • www.kabert.com

32 WWW.TMS.ORG

Company DescriptionsKempe Engineering (Geelong, VIC Australia)Booth #223 • www.kempe.com.auKempe is the largest provider of asset and maintenance services in the aluminium smelting industry. Kempe has the most extensive product range for the aluminium smelting industry and is one of the top five global suppliers. Kempe works for 30 smelters in 20 countries across 7 regions - Australasia, Middle East, Africa, Asia, Europe, North America and South America. Kempe has in-house manufacturing in Australia, China, UAE & Mozambique and in-house construc-tion crews & equipment. With 2,000 employees globally, Kempe supplies products and turnkey projects for Anode Handling & Cleaning, Rodding Shops, Butt Cleaning (hot & cold), Bath Cooling & Processing, plus other Carbon, Potroom & Casthouse equipment.

Life Cycle Engineering (Charleston, SC)Booth #534 • www.lce.com Life Cycle Engineering (LCE) is a leading provider of reliability consulting, engineering services and applied technology solutions that help both government and private enterprises achieve sustainable success. Widely recognized as the premier provider of innovative and successfully executed reliability and mainte-nance solutions worldwide, areas of focus for LCE include: design and engineering, logistics support, information technology applications, program manage-ment, change management, education, and holistic implementations of Reliability Excellence (Rx). Founded in 1976, LCE is headquartered in Charleston, South Carolina, with offices across North America. For more information, please visit our Web site at www.LCE.com or call (843) 744-7110. Light Metal Age (South San Francisco, CA)Booth #233 • www.lightmetalage.com Light Metal Age is the pre-eminent magazine of the light metal world. For over 68 years, Light Metal Age has covered primary production and semifabrica-tion of the light metals. The majority of editorial coverage is of aluminum processing and production, but also includes magnesium and titanium. Circulation is international and goes to primary and secondary smelters; casthouses; extrusion operations; rolling mills; sheet, rod, and wire mills; and foundries. Recipients are executives, general managers, plant managers, technicians, metallurgists, chemists, and engineers responsible for fabrication, production, and operations.Some of the editorial topics covered in Light Metal Age include: anode plant; potline technology; smelter/casthouse expansions; secondary aluminum process-ing and recycling; metallurgy; plant upgrades; metal quality; die design and simulation; rolling mill technology; energy, sustainability, and the environment; and markets and applications. For more information, visit Light Metal Age on the web at: www.lightmetalage.com. LP Royer, Inc. (Lac-Drolet, QC Canada)Booth #505 • www.lproyer.com For all workers in the metallurgic industry, L.P. Royer, celebrating its 75th anniversary, is your “one stop” supplier for specialized and innovative safety footwear. L.P. Royer’s specialized safety footwear, including our renowned smelter boots, are designed for ultimate performance in the multiple environment of your industry. The XPAN® soling technology, unique to L.P. Royer in North America, adds to the mix to bring you a lighter dual density rubber sole that protects from heat and extreme cold and offer superior traction, shock absorption and durability. With our wide range of adapted protection, including internal and external metatarsal protection, men and ladies styles, plus extra wide, you will find the best style for you. L.P. Royer products meet CSA ASTM quality standards and CE Marking.

Magnesium Elektron (Madison, IL)Booth #437 • www.magnesium-elektronusa.com Magnesium Elektron is a leading supplier of high performance magnesium wrought alloys, sand casting and die casting alloys, powders for numerous applica-tions, recycling services and light metal-related technologies. A division of the Luxfer Group, Magnesium Elektron has 7 manufacturing sites located in North America and Europe and supplies the aerospace, military, commercial and transportation markets. Magnesium Elektron’s alloy innovation and collaboration with the US Army has recently led to the establishment of the first Magnesium Armor/Ballistic Plate specification (MIL-DTL-32333). Magnesium Elektron will be promoting several new magnesium alloys in various forms including casting alloy Elektron 21, and wrought alloys WE43 and Elektron 675 in rolled form

Metallurgical Society of CIM (MetSoc) (Montréal, QC Canada)Booth #315 • www.metsoc.org

Microtrac (Montgomeryville, PA)Booth #629 • www.microtrac.com

Mid Mountain Materials Inc (Vancouver, WA)Booth #101 • www.mid-mountain.com


33EXHIBIT DIRECTORY

Momentum Press (Bahama, NC)Booth #221 • www.momentumpress.netMomentum Press was founded in 2007 on the principle of providing the very best information and knowledge on today’s advancements in science, engineer-ing, and applied technology. Its aim is to reach practitioners, researchers, educational faculty, and students in engineering, science, and industry with both traditional print media, as well as new, innovative electronically-delivered content. Momentum Press intends to reach those goals by offering its authors and customers a happy alternative to the often impersonal publishing environment so often encountered among today’s ever-larger media conglomerates.Mo-mentum Press publishes original scientific and engineering content, with a focus on the North-American, English language market, but with distribution and market presence worldwide. We have sales offices throughout the world, with a particularly strong presence in Asia, North America, and Latin America, as well as Europe and the Middle East.

Nalco (Naperville, IL)Booth #516 • www.nalco.comAs the global leader in Process & Water Treatment, Nalco Company provides essential expertise to the Alumina / Aluminum industry with technically, economi-cally and environmentally sustainable solutions from mine-to-mill. Nalco’s on-site, trained engineers help our customers achieve their goals by selecting and implementing optimal water and process technologies to increase recoveries and improve finished product quality, while providing the lowest overall total cost of operation.

National Institute of Standards and Technology (Gaithersburg, MD)Booth #604 • www.nist.gov/srm NFC (Beijing, China)Booth #607 • www.nfc.com.cn

NIST Technology Innovation Program (Gaithersburg, MD)Booth #602 • http://nist.gov/tip The Technology Innovation Program (TIP), at the National Institute of Standards and Technology, supports, promotes, and accelerates innovation in the United States by funding high-risk, high-reward research in areas of critical national need. TIP was established as an early stage innovation cost-shared R&D funding program to assist U.S. businesses and institutions of higher education or other organizations, such as national laboratories and nonprofit research institutions, pursue transformational research in areas of critical national need identified by TIP. These areas need government attention because the magnitude of the problem is large and societal challenges are not being sufficiently addressed. Single company projects may receive up to $3 million of TIP funding and Joint Venture projects up to $9 million. Subject to funding, TIP anticipates issuing a call for proposals in early 2010. More information about TIP may be found on the web at http://nist.gov/tip.

OKAYA (USA) Inc (Rosemont, IL)Booth #218 • http://www.okayausa.com/ We specialize in producing all kinds of alloying tablets. We are continuing to improve, modernize and expand our company’s production capacity in order to in-crease productivity and efficiency. This year, we obtained one of the biggest Mn ore mines in Jingxi County, Guangxi province of China. The capacity of this Mn ore mine is more than 3 million tons and our new production line of Mn flakes has also been completed. The new capacity is 30,000 tons per year. By combining the development of these programs with our state-of-the-art production management, technologies and facilities, we can guarantee enough raw material sup-ply at very competitive prices, while also maintaining our high level of quality. Information about our partners: Okaya (U.S.A.), Inc., is an international trading house that provides representation in North America for Chongqing Runji Alloy Company, LTD. This partnership is an example of Okaya’s expansion of our business domain from its core area of iron and steel to various related fields of business. We can also perform marketing, logistics and processing functions to fulfill our role as the “Best Global Sourcing Partner.” As an independent trading company with a high level of flexibility, Okaya will continue to propose insightful and creative business opportunities by looking at various areas with a broad perspective. Also visit us online at www.okaya.co.jp/en OLI Systems, Inc. (Morris Plains, NJ)Booth #504 Olympus America Inc. (Orangeburg, NY)Booth #210 • www.olympusamerica.com Olympus Scientific Equipment Group - Industrial Microscopes Olympus is a leader in industrial microscopy, with its recognized innovation, optical quality, customer support and training. Olympus industrial microscopes and metrology systems play a vital role in precision R&D, engineering and manufacturing applications in fields as diverse as the aerospace, automotive, electronics, materials science/metallurgy, medical device, photovoltaics, and semiconductor arenas. A newly expanded nationwide service, training and support network enhances the company’s dedication to client partnership, helping customers achieve even greater success. Olympus systems are designed and manufactured according to rigorous ISO 9001 and ISO 14001 international standards, demonstrating a commitment to offering the highest quality products and services, with minimal environmental impact. Visit us at www.olympusamerica.com/industrialmicroscopes

34 WWW.TMS.ORG

Company DescriptionsOpsis (Furulund, Sweden)Booth #514 • www.opsis.seOpsis is a worldwide supplier of gas monitoring systems for industrial emissions and process applications and ambient air and industrial fenceline monitoring applications. For 20 years, Opsis has provided the aluminium smelter industry automatic monitoring systems for potroom and duct measurements of Hydrogen Fluoride (HF) and also other components such as ulfur dioxide, nitrogen dioxide, carbon monoxide, carbon dioxide, VOC’s and others. Opsis systems use open path UV, FTIR and TDL technologies. Monitoring solutions are provided as integrated systems including gas measurements, additional sensors such as flow and temperature and software applications for reporting and networking. For open path measurements in the potroom roof vent, potroom instability can cause alignment issues. The Opsis monitoring technology features optional automatic alignment function of the telescopes that will keep the optical paths optimized at all times. Opsis has a worldwide network of technically skilled distributor companies.

Outotec Canada Ltd (Burlington, ON Canada0Booth #319 • www.outotec.com

PreciMeter (Tempe, AZ)Booth #201 • www.precimeter.com

Proto Manufacturing Inc. (Ypsilanti, MI)Booth #519 • www.protoxrd.com Riedhammer GmbH (Nuernberg, Germany)Booth #215 • www.riedhammer.de Since 1925, the company has specialized in the design, construction and commission of highly productive, state- of- the-art Ring Pit Furnaces for baking of first quality anodes and cathodes for the aluminum industry as well as electrodes for the steel industry: more than 185 baking furnaces, in 25 different countries were built or modernized based on this concept. Our reference list includes the major players in the production of primary aluminum with pre-baked technology as well as the top suppliers of electrodes for the steel industry. Beginning in 2004, the Italian Group SACMI acquired 90% of the Riedhammer shares (subse-quently increased to 95%). One essential consequence of this association was the development of important synergies between both companies, increasing our technical potentialities and strengthening the financial backup necessary for facing increasing market demands. With the acquisition of the Alesa Anode Baking technology in 2005, Riedhammer continues to advance towards technological maturity and market consolidation to become the only independent supplier worldwide capable to implement anode baking plants with both open and closed top furnaces.

Rio Tinto Alcan (Montreal, QC Canada)Booth #309 • www.riotintoalcan.comBuilding on more than a century of experience and expertise, Rio Tinto Alcan is the global leader in the aluminium industry. We supply high quality bauxite, alumina and aluminium worldwide and our AP smelting technology is the industry benchmark. Our enviable hydroelectric power position delivers significant competitive advantages in today’s carbon-constrained world. Rio Tinto Alcan is the aluminium product group of Rio Tinto, a leading international business involved in each stage of metal and mineral production. The Group is listed on the London Stock Exchange and Australian Securities Exchange under the symbol RIO. Rio Tinto’s major products are aluminium, copper, diamonds, coal, iron ore, uranium, gold and industrial minerals.

Sente Software Ltd (Guildford, Surrey Great Britain)Booth #414 • www.sentesoftware.co.uk

Shimadzu (Columbia, MD)Booth #633 • www.ssi.shimadzu.com

STAS (Chicoutimi, QC Canada)Booth #509 • www.stas.com

SunStone (Beijing, China)Booth #230 • http://www.sun-stone.comSunStone was established in 1998 and is registered with independent corporate status. The headquarters is e in Beijing, but there are branch agencies in Tianjin, in Kunshan Jiangsu Province, and Tehran, Iran. Sun Stone also has sister companies in Korea, India and Turkey. We focus on import & export business, domestic business and processing business of Prebaked Carbon Anode and other raw materials and equipments of Aluminum Smelter.


35EXHIBIT DIRECTORY

Techmo Car SpA (Limena Padova, Italy)Booth #310 • www.techmo.itTechmo is an Italian independent company focused in the engineering and production of special mobile and stationary equipment for the aluminium and nonferrous metals industry. The full range of purpose designed machines covers different types of equipment performing a large number of operations in pot-rooms, rodding shops and cast-houses. The Company’s aim is to provide the most innovative, rational, cost effective and user friendly technical solutions. Among the most significant families of mobile equipment are the Multipurpose Anode Changers, Tapping Vehicles, Crust Breakers, Anode Transporters, Crucible Transporters and Tilters, Alumina/ AlF3 Feeding Vehicles, Furnace Charging Vehicles and Furnace Tending Vehicles. Beside its line of purposed designed vehicles, Techmo provides a number of stationary equipment such as Crucible Cleaning Machines, the Crucible Tilting stations and the Anode Butts Cleaning Stations.

Thermo Scientific (Madison, WI)Booth #523 • www.thermofisher.com

Thermo Scientific Niton Analyzers (Billerica, MA)Booth #622 • www.thermo.com/niton When it comes to the accurate analysis of metal alloys, Thermo Scientific Niton XRF analyzers set the industry standard. With a unique library of 400-pluys alloy grades, our handheld XRF instruments provide immediate, nondestructive chemical analysis of aluminum, titanium, and nickel alloys, as well as superal-loys, stainless steel, and other metals. These analyzers deliver superior performance in the form of faster analysis, lower detection limits and unparalleled analytical precision. This can mean decreased potential for material mix-ups, as well as instant recovery of lost traceability. Using the Niton® XL3 with GOLDD technology, you not only gain rapid grade identification and lab-quality composition, but also improvements in light element detection, overall sensitivity, and measurement times.

Thermo-Calc Software Inc (McMurray, PA)Booth #100 • www.thermocalc.com Thermo-Calc Software is a leading developer of software and databases for calculations involving computational thermodynamics and diffusion controlled simulations. Thermo-Calc is a powerful tool for performing thermodynamic calculations for multi-component systems. Calculations are based on thermody-namic databases produced by expert evaluation of experimental data. Databases are available for steels, Ti, Al, Ni-superalloys and other materials. Program-ming interfaces are available which enable Thermo-Calc to be called directly from in-house developed software or MatLab. DICTRA is used for accurate simu-lations of diffusion in multi-component alloys. Applications include: homogenization of alloys, microsegregation during solidification, coarsening of precipitates, and welding.

Windhoff Bahn-und Anlagentechnik GmbH (Rheine, Germany)Booth #521 • www.windhoff.de

Tap into the incredible network of The Minerals, Metals & Materials Society with The Minerals, Metals & Materials Society Marketplace. Powered by MultiView, the Guide gives materials and metallurgy professionals a faster and easier way to find great vendors.

Simplifind your search today at tmsmarketplace.com.

SIMPLIFIND

139th Annual Meeting & ExhibitionFebruary 14-18, 2010 • Washington State Convention Center • Seattle, Washington USA

TE

CH

NIC

AL

PR

OG

RA

M

Fives Solios ... The Premier Green Sponsor of TMS 2010

Table of Contents

Program-at-a-Glance ......................................................................................................................2Sunday PM ...................................................................................................................................10Monday AM ..................................................................................................................................16Monday PM ..................................................................................................................................34Tuesday AM ..................................................................................................................................53Tuesday PM ..................................................................................................................................70Wednesday AM ............................................................................................................................90Wednesday PM ..........................................................................................................................107Thursday AM ..............................................................................................................................125Posters ........................................................................................................................................140Index ...........................................................................................................................................146

2

139th Annual Meeting & Exhibition At-A-Glance20

10 F

unct

iona

l and

Str

uctu

ral N

anom

ater

ials

: Fa

bric

atio

n, P

rope

rtie

s, A

pplic

atio

ns a

nd Im

plic

atio

ns

Char

acte

rizat

ion

ofN

anom

ater

ials

107

214

X

El

ectri

calP

rope

rties

ofN

anom

ater

ials

16

214

X

Mec

hani

calP

rope

rties

ofN

anom

ater

ials

125

214

X

Nano

-Sen

sors

and

Mag

netic

Pro

perti

es

34

214

X

Po

ster

Ses

sion

10

214

X

XX

XX

XX

X

Synt

hesis

ofN

anom

ater

ials

I53

21

4

X

Sy

nthe

siso

fNan

omat

eria

lsII

70

214

X

Sy

nthe

siso

fNan

omat

eria

lsIII

90

21

4

X

Adva

nced

Mat

eria

ls a

nd F

uels

Ena

blin

g Fu

ture

Fus

ion,

Fis

sion

and

Hyb

rid R

eact

or S

yste

ms

Di

agno

stics

and

Stru

ctur

alM

ater

ials

107

3A

X

Hy

brid

Fiss

ion

Fuel

s12

53A

X

Adva

nces

in C

ompo

site

, Cel

lula

r and

Nat

ural

Mat

eria

ls

Cellu

lara

ndP

orou

sM

ater

ials

34

305

X

Co

mpo

sites

and

Mod

ellin

g10

830

5

X

Func

tiona

lCom

posit

eM

ater

ials

90

30

5

X

M

etal

Foa

ms

53

305

X

Met

alM

atrix

Com

posit

es

71

305

X

Na

tura

lMat

eria

lsan

dPo

lymer

Mat

rixC

ompo

sites

16

30

5

X

Po

ster

Ses

sion

10

305

X

XX

XX

XX

Alte

rnat

ive

Ener

gy R

esou

rces

for M

etal

s an

d M

ater

ials

Pro

duct

ion

Sym

posi

um

Sess

ion

I91

31

0

X

Alum

ina

and

Baux

ite

Alum

ina

Prec

ipita

tion

126

611

X

Baux

iteC

hara

cter

izatio

nan

dHa

ndlin

g10

861

2

X

Baye

rPro

cess

Che

mist

rya

ndA

lum

ina

Qua

lityI

34

611

X

Ba

yerP

roce

ssC

hem

istry

and

Alu

min

aQ

uality

II

54

611

X

Indu

stry

Tren

dsa

ndIs

sues

10

861

1

X

Proc

ess

Impr

ovem

ents

and

Exp

erie

nces

-Re

dSi

deI

71

611

X

Pr

oces

sIm

prov

emen

tsa

ndE

xper

ienc

es-

Red

Side

II

91

611

X

Alum

inum

Allo

ys: F

abric

atio

n, C

hara

cter

izat

ion

and

Appl

icat

ions

De

velo

pmen

tand

App

licat

ion

17

615

X

Emer

ging

Tech

nolo

gies

10

961

5

X

Fatig

uea

ndC

orro

sion

91

615

X

Mat

eria

lsCh

arac

teriz

atio

n72

61

5

X

Num

erica

lMod

elin

g35

61

5

X

Post

erS

essio

n10

61

5

XX

XX

XX

X

Proc

essin

gan

dTe

xtur

e54

61

5

X

3

At-A-GlanceAl

umin

um R

educ

tion

Tech

nolo

gy

Alum

iniu

mS

mel

ter:

Envir

onm

ent,

Heal

tha

ndS

afet

y35

60

8

X

Alum

iniu

mS

mel

ter:

Equi

pmen

t36

60

9

X

Hall-

Héro

ultC

ell:E

nerg

yCo

nser

vatio

nTh

roug

hCe

llDes

ign

and

Proc

ess

Impr

ovem

ents

72

60

8

X

Hall-

Héro

ultC

ell:P

roce

ssC

ontro

l10

960

8

X

Hall-

Héro

ultC

ell:P

roce

sses

Mod

elin

gan

dAl

umin

ium

Sm

elte

rMod

elin

g92

60

8

X

Ha

ll-Hé

roul

tCel

l:Pro

cess

esM

odel

ing

and

Mea

sure

men

ts

92

614

X

Hall-

Héro

ultC

ell:R

awM

ater

ials

and

Proc

ess

Cont

rol

126

608

X

Hall-

Héro

ultC

ell:T

echn

olog

y54

60

8

X

Alum

inum

Rol

ling

Se

ssio

nI

126

615

X

Biol

ogic

al M

ater

ials

Sci

ence

Bi

o-in

spire

dM

ater

ials

Desig

nan

dPr

oces

sing

I:M

acro

mol

ecul

arC

once

pts

and

Appl

icatio

ns

17

205

X

Bio-

insp

ired

Mat

eria

lsDe

sign

and

Proc

essin

gII:

Bio

cera

mics

and

Bio

min

eral

izatio

n36

20

5

X

Com

puta

tiona

lMat

eria

lsSc

ienc

e12

720

5

X

M

echa

nica

lBeh

avio

rofB

iolo

gica

lMat

eria

lsI:

Natu

re-in

spire

dM

ater

ials

55

205

X

Mec

hani

calB

ehav

ioro

fBio

logi

calM

ater

ials

II:H

ard

Tiss

ues

and

thei

rRep

lace

men

tMat

eria

ls73

20

5

X

Mec

hani

calB

ehav

ioro

fBio

logi

calM

ater

ials

III:S

oftT

issue

san

dM

ater

ials

93

205

X

Post

erS

essio

n11

20

5

XX

XX

XX

XX

Su

rface

Eng

inee

ring:

Bio

mim

etics

and

Bio

logi

calA

pplic

atio

ns

109

205

X

Bulk

Met

allic

Gla

sses

VII

Al

loyD

evel

opm

enta

ndA

pplic

atio

nI

55

213

X

Alloy

Dev

elop

men

tand

App

licat

ion

II73

21

3

X

Fatig

uea

ndC

orro

sion

93

213

X

Mec

hani

cala

ndO

ther

Pro

perti

es

127

213

X

Sim

ulat

ion

and

Mod

elin

g11

021

3

X

Stru

ctur

esa

ndM

echa

nica

lPro

perti

esI

18

213

X

Stru

ctur

esa

ndM

echa

nica

lPro

perti

esII

37

21

3

X

Carb

on D

ioxi

de a

nd O

ther

Gre

enho

use

Gas

Red

uctio

n M

etal

lurg

y - 2

010

Se

ssio

nI

56

310

X

Carb

on M

anag

emen

t and

Car

bon

Diox

ide

Redu

ctio

n

Sess

ion

I11

131

0

X

Cast

Sho

p fo

r Alu

min

um P

rodu

ctio

n

Cast

Hou

seP

rodu

ctivi

tya

ndS

trip

Cast

ing

111

609

X

Di

rect

Chi

lland

Con

veyo

rCas

ting

94

609

X

Furn

ace

Tech

nolo

gya

ndM

eltH

andl

ing

74

609

X

G

rain

Refi

nem

ent,

Alloy

ing,

Sol

idific

atio

nan

dSh

ape

Cast

ing

56

609

X

Mel

tOxid

atio

n,In

clusio

nsa

ndH

ydro

gen

127

609

X

4

139th Annual Meeting & Exhibition At-A-GlanceCh

arac

teriz

atio

n of

Min

eral

s, M

etal

s an

d M

ater

ials

Ch

arac

teriz

atio

nof

Allo

ys

57

307

X

Char

acte

rizat

ion

ofC

u,Z

n,M

n,F

e,A

u,a

ndC

arbo

nPh

ases

11

130

7

X

Char

acte

rizat

ion

ofG

rain

Size

,Mor

phol

ogy,

Tran

smitt

ance

,and

Tom

ogra

phy

74

307

X

Ch

arac

teriz

atio

nof

Iron

and

Ste

elI

18

307

X

Char

acte

rizat

ion

ofIr

ona

ndS

teel

II

37

307

X

Ch

arac

teriz

atio

nof

Micr

o-,N

ano-

,and

Thi

nFi

lms

128

306

X

Char

acte

rizat

ion

ofP

MC’

s,C

ompo

sites

,Fib

ers,

Pol

ymer

s,a

ndO

rgan

ics

94

307

X

Char

acte

rizat

ion

ofR

efra

ctor

ies,

Clay

s,C

oncr

ete,

Inte

rface

s,a

ndT

herm

odyn

amics

12

830

7

X

Po

ster

Ses

sion

11

307

X

XX

XX

XX

X

Coat

ings

for S

truc

tura

l, Bi

olog

ical

, and

Ele

ctro

nic

Appl

icat

ions

Ap

plica

tions

ofC

oatin

gsI

38

309

X

Appl

icatio

nso

fCoa

tings

II

75

309

X

M

etal

licC

oatin

gs

57

309

X

Proc

essin

gTe

chni

ques

and

Cha

ract

eriza

tion

19

309

X

Com

puta

tiona

l The

rmod

ynam

ics

and

Kin

etic

s

Diffu

sion

and

Defe

cts

19

308

X

Gra

inG

rowt

h38

30

8

X

Phas

eFi

eld,

CAL

PHAD

and

Oth

erM

odel

ing

Tech

niqu

es

95

308

X

Post

erS

essio

n12

30

8

XX

XX

XX

W

ettin

gPh

enom

ena

I58

30

8

X

W

ettin

gPh

enom

ena

II75

30

8

X

Cost

-Affo

rdab

le T

itani

um II

I

Crea

tive

Proc

essin

gan

dPr

oper

tyE

nhan

cem

entI

95

61

8

X

Cr

eativ

ePr

oces

sing

and

Prop

erty

Enh

ance

men

tII

112

618

X

Lo

wCo

stM

ater

ials

and

Proc

essin

g39

61

8

X

Ove

rvie

wan

dLo

wCo

stP

roce

ssin

g20

61

8

X

Po

wder

Con

solid

atio

nan

dPr

oper

ties

I58

61

8

X

Po

wder

Con

solid

atio

nan

dPr

oper

ties

II76

61

8

X

Elec

trod

e Te

chno

logy

for A

lum

inum

Pro

duct

ion

An

ode

Bakin

g/An

ode

Prop

ertie

s11

261

6

X

Anod

eG

reen

Mill

96

616

X

Cath

odes

-M

ater

ials

and

Ope

ratio

n39

61

6

X

Non-

Carb

onM

ater

ials

inC

atho

des

58

616

X

Preh

eatin

gan

dO

pera

tiona

lAsp

ects

12

961

6

X

Tr

aditio

nala

ndIn

ertA

node

Mat

eria

ls76

61

6

X

Elec

trom

etal

lurg

y - G

ener

al S

essi

on

Sess

ion

I39

31

0

X En

ergy

Con

serv

atio

n in

Met

als

Se

ssio

nI

77

310

X

Failu

re o

f Sm

all-S

cale

Str

uctu

res

De

form

atio

nan

dFa

ilure

40

20

6

X

Defo

rmat

ion

Even

tsin

Pilla

rs,F

ilms

and

Oth

erS

truct

ures

59

20

6

X

De

vice

Failu

rea

ndF

atig

ue

77

206

X

Na

nowi

reB

ehav

ior

20

206

X

5

At-A-GlanceFe

dera

l Fun

ding

Wor

ksho

p 11

2 60

2

X

Gen

eral

Abs

trac

ts: E

lect

roni

c, M

agne

tic a

nd P

hoto

nic

Mat

eria

ls D

ivis

ion

Se

ssio

nI

113

308

X

Se

ssio

nII

129

308

X

Sess

ion

III

129

310

X

Gen

eral

Abs

trac

ts: L

ight

Met

als

Divi

sion

Se

ssio

nI

96

607

X

Sess

ion

II11

360

7

X

Sess

ion

III

130

607

X

Gen

eral

Abs

trac

ts: M

ater

ials

Pro

cess

ing

and

Man

ufac

turin

g Di

visi

on

Form

ing

and

Mac

hini

ng

130

606

X

Micr

ostru

ctur

e,C

hara

cter

izatio

n,a

ndM

odel

ing

97

601

X

Synt

hesis

and

Pro

cess

ing

114

601

X

W

eldi

ng

21

611

X

Gen

eral

Abs

trac

ts: S

truc

tura

l Mat

eria

ls D

ivis

ion

En

viron

men

talD

egra

datio

n13

160

1

X

Fa

tigue

and

Fra

ctur

e77

3A

X

Mat

eria

lsCh

arac

teriz

atio

nan

dSh

ock

Load

ing

21

608

X

Non-

Ferro

usM

ater

ials

97

3A

X

Gen

eral

Pos

ter S

essi

on

Sess

ion

I14

0Ex

hibi

tHal

l

XX

XX

X

Glo

bal I

nnov

atio

ns in

Man

ufac

turin

g of

Aer

ospa

ce M

ater

ials

: Th

e 11

th M

PMD

Glo

bal I

nnov

atio

ns S

ympo

sium

In

nova

tions

inA

dditiv

eM

anuf

actu

ring

59

306

X

Inno

vatio

nsin

Cas

ting

Tech

nolo

gies

40

30

6

X

Inno

vatio

nsin

Prim

ary

and

Seco

ndar

yFo

rmin

g-A

lum

inum

,Mag

nesiu

m,a

ndT

itani

umA

lum

inid

es/

Inno

vatio

nsin

Mac

hini

nga

ndJ

oini

ng

114

306

X

In

nova

tions

inP

rimar

yan

dSe

cond

ary

Form

ing

-Nick

el

98

306

X

Inno

vatio

nsin

Prim

ary

and

Seco

ndar

yFo

rmin

g-T

itani

um

78

306

X

Pe

rspe

ctive

sfro

mG

over

nmen

tand

Indu

stry

22

30

6

X

Po

ster

Ses

sion

12

306

X

XX

XX

XX

Het

erog

eneo

us N

ucle

atio

n an

d In

itial

Mic

rost

ruct

ure

Evol

utio

n in

Allo

ys a

nd C

ollo

ids

Ex

perim

entI

60

61

4

X

Ex

perim

entI

I78

61

4

X

Sim

ulat

ion

I22

61

4

X

Si

mul

atio

nII

41

614

X

Hum

e-Ro

ther

y Sy

mpo

sium

: Con

figur

atio

nal T

herm

odyn

amic

s of

Mat

eria

ls

Sess

ion

I22

21

2

X

Se

ssio

nII

41

212

X

Se

ssio

nIII

60

21

2

X

Se

ssio

nIV

79

21

2

X

Sess

ion

V98

21

2

X

Se

ssio

nVI

11

521

2

X

6

139th Annual Meeting & Exhibition At-A-GlanceH

ydro

met

allu

rgy

- Gen

eral

Ses

sion

Se

ssio

nI

23

310

X

Inte

rnat

iona

l Sym

posi

um o

n H

igh-

Tem

pera

ture

Met

allu

rgic

al P

roce

ssin

g

Cera

mics

and

Inte

rmet

allic

s42

61

9

X

Inno

vatio

nsin

Iron

mak

ing

23

619

X

Seco

ndar

yPr

oces

sing

60

619

X

Smel

ting

and

Redu

ctio

nPr

oces

ses

79

619

X

Jim

Eva

ns H

onor

ary

Sym

posi

um

Beyo

ndB

erke

leyT

imes

13

162

0

X

Ca

stS

hop

Alum

inum

Pro

duct

ion

Join

tSes

sion:

Flo

wan

dSo

lidific

atio

nPh

enom

ena

inN

onfe

rrous

Cas

ting

42

620

X

El

ectro

chem

icalP

heno

men

a11

561

9

X

Flow

Phe

nom

ena

inS

teel

Con

tinuo

usC

astin

g24

62

0

X

Fl

ow,S

olid

ificat

ion,

and

Inclu

sion

Beha

viori

nCa

stin

gPr

oces

ses

61

620

X

Met

alF

low,

Bub

bles

,and

Inclu

sions

Beh

avio

rin

Refin

ing

and

Redu

ctio

nVe

ssel

s80

62

0

X

Mod

elin

g11

562

0

X

Post

erS

essio

n13

62

0

XX

XX

XX

XX

Pr

imar

yan

dSe

cond

ary

Prod

uctio

nof

Met

als

98

620

X

Mag

nesi

um T

echn

olog

y 20

10

Cast

Allo

ys,C

astin

g,a

ndG

rain

Refi

nem

ent

99

613

X

Coat

ings

and

Cor

rosio

n61

61

2

X

Cr

eep,

Rel

axat

ion,

Rec

over

y,an

dRe

crys

talliz

atio

n62

61

3

X

De

form

atio

nM

echa

nism

s99

61

2

X

Ef

fect

sof

Hea

tTre

atm

enta

ndC

astin

gPr

oces

s11

661

3

X

Fatig

ue,F

ailu

re,a

ndW

ear

80

613

X

Fo

rmin

gan

dW

eldi

ng

132

613

X

ICM

EI(

Inte

grat

edC

ompu

tatio

nalM

ater

ials

Engi

neer

ing)

43

61

2

X

ICM

EII

and

Biom

edica

lApp

licat

ions

13

261

2

X

M

agne

sium

-Ra

reE

arth

Allo

ys

81

612

X

Pl

enar

ySe

ssio

n24

61

2

X

Po

ster

Ses

sion

13

612

X

XX

XX

XX

X

Prim

ary

Prod

uctio

nan

dFl

amm

abilit

yIs

sues

43

61

3

X

Mat

eria

ls in

Cle

an P

ower

Sys

tem

s V:

Cle

an C

oal-,

Hyd

roge

n Ba

sed-

Tech

nolo

gies

, Fu

el C

ells

, and

Mat

eria

ls fo

r Ene

rgy

Stor

age

Ba

tterie

san

dO

ther

s13

321

2

X

M

ater

ials

forC

lean

Coa

lPow

era

ndC

CSS

yste

ms

I24

21

1

X

M

ater

ials

forC

lean

Coa

lPow

era

ndC

CSS

yste

ms

II44

21

1

X

Mat

eria

lsfo

rHyd

roge

nPr

oduc

tion,

Sto

rage

,and

Dist

ribut

ion

62

211

X

PEM

and

Bat

terie

s13

321

1

X

SO

FCI

81

211

X

SO

FCII

10

021

1

X

SO

FC,P

EMa

ndD

MFC

11

621

1

X

Mat

eria

ls P

roce

ssin

g Fu

ndam

enta

ls

Defo

rmat

ion

Proc

essin

gan

dHe

atTr

eatm

ent

44

601

X

Pr

oces

sM

odel

ing

and

Mea

sure

men

ts

63

601

X

Smel

ting,

Refi

ning

,Aqu

eous

and

Liq

uid

Proc

essin

g82

60

1

X

Solid

ificat

ion

and

Cast

ing

25

601

X

7

At-A-GlanceM

echa

nica

l Per

form

ance

for C

urre

nt a

nd N

ext-G

ener

atio

n N

ucle

ar R

eact

ors

Ad

vanc

esin

Mec

hani

calT

estin

g25

20

1

X

Ad

vanc

esin

Mod

elin

gfo

rRea

ctor

Con

ditio

ns

63

201

X

Ensu

ring

Life

time

and

Relia

bility

45

20

1

X

Micr

ostru

ctur

ean

dNa

nost

ruct

ure

inR

eact

orE

nviro

nmen

ts

82

201

X

Mod

elin

g of

Mul

ti-Sc

ale

Phen

omen

a fo

r Bat

terie

s

Sess

ion

I10

060

4

X

Mod

elin

g, S

imul

atio

n, a

nd T

heor

y of

Nan

omec

hani

cal M

ater

ials

Beh

avio

r

Nano

inde

ntat

ion

and

Cont

actM

echa

nics

13

430

4

X

Na

notu

bes,

Sof

tMat

eria

lsan

dBi

omed

icalA

pplic

atio

ns

83

304

X

Ph

ysics

ofD

efec

ts,D

isloc

atio

nNu

cleat

ion

and

Frac

ture

I10

130

4

X

Ph

ysics

ofD

efec

ts,D

isloc

atio

nNu

cleat

ion

and

Frac

ture

II

117

304

X

Pl

astic

itya

ndS

treng

tho

fNan

ostru

ctur

eda

ndN

anos

cale

Mat

eria

lsI

26

304

X

Plas

ticity

and

Stre

ngth

ofN

anos

truct

ured

and

Nan

osca

leM

ater

ials

II45

30

4

X

Plas

ticity

and

Stre

ngth

ofN

anos

truct

ured

and

Nan

osca

leM

ater

ials

III

64

304

X

Neu

tron

and

X-R

ay S

tudi

es o

f Adv

ance

d M

ater

ials

III

2D

Mat

eria

lsSc

ienc

efro

mD

iffra

ctio

n46

30

3

X

Appl

icatio

nso

fLin

ePr

ofile

Ana

lysis

83

303

X

Di

ffrac

tion

Anal

ysis

ofA

lloys

13

430

3

X

Di

ffuse

Sca

tterin

gI

64

303

X

Diffu

seS

catte

ring

II11

730

3

X

Post

erS

essio

n13

30

3

XX

XX

XX

XX

St

rain

and

Disl

ocat

ion

Gra

dien

tsfr

omM

icrod

iffra

ctio

nI

26

303

X

Stra

ina

ndD

isloc

atio

nG

radi

ents

from

Micr

odiff

ract

ion

II10

130

3

X

St

ruct

ure

from

Diff

ract

ion

27

613

X

Nuc

lear

Ene

rgy:

Pro

cess

es a

nd P

olic

ies

Ch

arac

teriz

atio

n11

820

1

X

Mat

eria

lBeh

avio

r10

220

1

X

M

ater

ialD

evel

opm

ent

135

201

X

Pb-F

ree

Sold

ers

and

Emer

ging

Inte

rcon

nect

and

Pac

kagi

ng T

echn

olog

ies

Al

loyD

evel

opm

ent

102

204

X

Elec

trom

igra

tion

27

204

X

Mec

hani

calB

ehav

ior,

Failu

reM

ode

46

204

X

M

icros

truct

ure,

Inte

rmet

allic

s,W

hisk

er(I

I)13

520

4

X

M

icros

truct

ure,

Inte

rmet

allic

s,W

hisk

er(I)

11

820

4

X

Post

erS

essio

n14

20

4

XX

XX

XX

XX

Re

liabi

lity(I

)65

20

4

X

Re

liabi

lity(I

I)84

20

4

X

Phas

e St

abili

ty, P

hase

Tra

nsfo

rmat

ions

, and

Rea

ctiv

e Ph

ase

Form

atio

n in

El

ectr

onic

Mat

eria

ls IX

Se

ssio

nI

28

203

X

Sess

ion

II47

20

3

X

Sess

ion

III

65

203

X

Sess

ion

IV

84

203

X

8

139th Annual Meeting & Exhibition At-A-GlancePo

lym

er N

anoc

ompo

site

s

Carb

onF

iber

san

dCa

rbon

Nan

otub

es

103

309

X

Fabr

icatio

n,C

hara

cter

izatio

n,M

odel

ing

and

Appl

icatio

ns

136

309

X

Met

als

and

othe

rNan

opar

ticle

s11

930

9

X

Proc

essi

ng M

ater

ials

for P

rope

rtie

s

Adva

nced

Mat

eria

lsPr

oces

sing

29

617

X

Adva

nced

Ste

elP

roce

ssin

g66

61

7

X

Ag

glom

erat

esa

ndC

ompo

site

Mat

eria

lsPr

oces

sing

47

617

X

Fu

nctio

nalM

ater

ials

Proc

essin

g10

361

7

X

Li

ghtW

eigh

tMat

eria

lsPr

oces

sing

85

617

X

Po

lymer

s,C

eram

icsa

ndG

lass

es

136

617

X

Proc

essin

g-M

icros

truct

ure-

Prop

ertie

s11

961

7

X

Recy

clin

g G

ener

al S

essi

ons

M

etal

s10

420

6

X

W

aste

Utili

zatio

n12

020

6

X

Refr

acto

ry M

etal

s 20

10

Oxid

atio

nof

Allo

ysa

ndC

oatin

gs

66

2A

X

Proc

essin

gan

dPr

oper

ties

I29

2A

X

Pr

oces

sing

and

Prop

ertie

sII

48

2A

X

Sola

r Cel

l Sili

con:

Pro

duct

ion

and

Recy

ling

Se

ssio

nI

29

2B

X

Solid

-Sta

te In

terf

aces

: Tow

ard

an A

tom

istic

-Sca

le U

nder

stan

ding

of S

truc

ture

, Pr

oper

ties,

and

Beh

avio

r thr

ough

The

ory

and

Expe

rimen

t

Atom

ic-Le

velS

truct

ure

and

Com

posit

ion

30

602

X

Diffu

sion,

Rad

iatio

nDa

mag

e,a

ndIn

tera

ctio

nwi

thP

oint

Def

ects

85

60

2

X

Mec

hani

calP

rope

rties

and

Inte

ract

ion

with

Disl

ocat

ions

67

60

2

X

M

icros

truct

ural

Evo

lutio

n86

60

2

X

Ther

mal

,Ele

ctric

al,a

ndT

herm

oele

ctric

Beh

avio

rs

120

602

X

Th

erm

odyn

amics

and

Mor

phol

ogica

lSta

bility

48

60

2

X

Stoc

hast

ic M

etho

ds in

Mat

eria

ls R

esea

rch

St

ocha

stic

Met

hods

I:N

ewA

lgor

ithm

san

dM

odel

Bui

ldin

g12

161

4

X

Stoc

hast

icM

etho

dsII

:Pro

perty

Pre

dict

ion

and

Mat

eria

lDes

ign

137

614

X

Surf

ace

Engi

neer

ing

for A

mor

phou

s-, N

anoc

ryst

allin

e-, a

nd B

io-M

ater

ials

Po

ster

Ses

sion

14

604

X

XX

XX

Se

ssio

nI

30

604

X

Sess

ion

II49

60

4

X

Sess

ion

III

67

604

X

Sess

ion

IV

86

604

X

9

At-A-GlanceSu

stai

nabl

e M

ater

ials

Pro

cess

ing

and

Prod

uctio

n

Mea

surin

gSu

stai

nabi

lity

86

2B

X

M

otiva

ting

Sust

aina

bility

I49

2B

X

Mot

ivatin

gSu

stai

nabi

lityII

68

2B

X

Su

stai

nabi

lityin

Edu

catio

n12

12B

X

Sust

aina

ble

Tech

nolo

gies

I10

42B

X

Su

stai

nabl

eTe

chno

logi

esII

13

72B

X

The

Alum

iniu

m In

dust

ry –

Per

spec

tives

on

our F

utur

e

Sess

ion

I31

Ba

llrm

.6A

X

The

Vase

k Vi

tek

Hon

orar

y Sy

mpo

sium

on

Crys

tal D

efec

ts,

Com

puta

tiona

l Mat

eria

ls S

cien

ce a

nd A

pplic

atio

ns

Com

puta

tiona

lMat

eria

lsSc

ienc

eI

31

603

X

Com

puta

tiona

lMat

eria

lsSc

ienc

eII

50

603

X

Cr

ysta

lDef

ects

and

Mec

hani

calP

rope

rties

12

260

3

X

Dislo

catio

nsI

68

603

X

Dislo

catio

nsII

12

260

4

X

Gra

inB

ound

arie

san

dG

rain

Bou

ndar

yEn

gine

erin

g13

860

4

X

G

rain

Bou

ndar

ies

and

Inte

rface

Stru

ctur

ean

dPr

oper

ties:

Join

tSes

sion

with

Sol

id-S

tate

Inte

rface

s10

560

3

X

G

rain

Bou

ndar

ies,

Disl

ocat

ions

and

Mes

osco

pic

Mod

elin

g13

860

3

X

M

echa

nica

lPro

perti

es

87

603

X

Po

ster

Ses

sion

14

603

X

XX

XX

XX

X

Ther

mo-

Mec

hani

cal R

espo

nse

of M

olec

ular

Sol

ids:

M

ulti-

Reso

lutio

n Th

eory

, Sim

ulat

ions

, and

Exp

erim

ents

M

olec

ular

Sol

ids

I12

320

3

X

Mol

ecul

arS

olid

sII

139

203

X

Polym

ers

and

Com

posit

es

105

203

X

Thre

e-Di

men

sion

al M

ater

ials

Sci

ence

VI

3D

Rep

rese

ntat

iveV

olum

eEl

emen

tsa

ndS

imul

ated

Micr

ostru

ctur

es

87

401

X

Ap

plica

tions

of3

DM

icros

truct

ural

Dat

a69

40

1

X

No

velT

ools

for3

DDa

taA

cqui

sitio

nan

dAn

alys

is-P

artI

10

640

1

X

No

velT

ools

for3

DDa

taA

cqui

sitio

nan

dAn

alys

is-P

artI

I12

340

1

X

Proc

essin

gan

dAn

alys

isof

Lar

ge3

DDa

tase

ts

50

401

X

Th

ree-

Dim

ensio

nalC

ryst

allo

grap

hya

ndG

rain

Bou

ndar

yAn

alys

is32

40

1

X

Ultr

afine

Gra

ined

Mat

eria

ls –

Six

th In

tern

atio

nal S

ympo

sium

Ap

plica

tions

and

Tran

sitio

ns

124

606

X

Ch

arac

teriz

atio

nan

dCo

mpu

tatio

nalM

odel

ing

88

607

X

De

form

atio

nan

dPr

oces

sing

Mec

hani

cs

69

607

X

Mec

hani

calR

espo

nse

51

606

X

M

icros

truct

ural

Evo

lutio

n89

60

6

X

Post

erS

essio

n15

60

6

XX

XX

XX

X

Proc

essin

gTe

chno

logi

es

51

607

X

Pr

oces

sing-

Micr

ostru

ctur

e-Pr

oper

ties

I32

60

6

X

Pr

oces

sing-

Micr

ostru

ctur

e-Pr

oper

ties

II33

60

7

X

St

abilit

y70

60

6

X

Yo

ung

Scie

ntist

10

660

6

X


10

Technical Program

Su

n. P

M

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Sun PM-Thurs AM Room: 214February 14, 2010 Location: Washington State Convention Center

Functional Materials with Shape Memory Effect at the Nanoscale: Arteniy Irzhak1; Victor Koledov1; Vladimir Shavrov1; Peter Lega1; Alexander Shelyakov1; Veronika Afonona1; Kristina Akatyeva1; Vladimir Kalashnikov1; Pnina Ari-Gur2; 1Kotelnikov’ Institute of Redioengineering and Electronics of RAS (Moscow); 2Western Michigan University

Mechanical Properties and Consolidation of Binderless Nanocrystalline Niobium Carbide by Rapid Sintering: In-Jin Shon1; Kee-Do Woo1; In-Yong Ko1; Kee-Seok Nam2; Byung-Ryang Kim1; 1Chonbuk University; 2Korea Institute of Materials Science

Microstructure and Naocrystaline Film of Fe- Mn Vs Fe-Ni Films: Bassey Udofot1; 1NASA/Goddard Space Flight Center

Nanocomposites of Brazilian Organophillic Clays with Natural Rubber: Guillermo Martín-Cortés1; Fabio Esper1; Adriana Silva2; Alexandre Dantas2; Wildor Hennies1; Francisco Valenzuela-Díaz1; 1Polytechnic School-University of São Paulo; 2BENTONISA – Bentonita do Nordeste S.A

Photochemical Solution Phase Engineering of TiO2 - Based Amphiphilic Nanocrystals: Gianvito Caputo1; Davide Cozzoli1; 1University of Salento

Properties and Consolidation of Nanostructured MoSi2–Si3N4 from Mechanically Reacted Powder by Rapid Sinte: In-Jin Shon1; Na-Ra Park1; Jin-Kook Yoon2; In-Yong Ko1; Kee-Seok Nam3; Na-Ri Kim1; 1Chonbuk University; 2Korea Institute of Science and Technology; 3Korea Institute of Materials Science

Synthesis and Characterization of Nano-Structured Silica from Rice Husk and Its Application as a Heterogeneous Catalyst: Harini Pattabhiraman1; G. Ramalingam1; S. Mittal1; S. Bhattacharjee1; S. Mandavgane1; J. Bhatt1; D.Peshwe1; 1Visvesvaraya National Institute of Technology

Synthesis of Nanowires-Enhanced Bulk TE Nanocomposite for High-Efficiency Power Generation: W. Luo1; J. Fang1; Timothy Lin1; 1Aegis Technology Inc.

Advances in Composite, Cellular and Natural Materials: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University

Sun PM-Wed PM Room: 305February 14, 2010 Location: Washington State Convention Center

Effects of Particle Sizes of Titanium Hydride on Cell Structures for Al Foams: Lei Wang1; Guangchun Yao1; Hongjie Luo1; Lisi Liang1; Jia Ma1; Zhongsheng Hua1; 1Northeastern University

Nanocrystalline Al4Si3C6 Formed in Low Temperature Sinter Processing: Li Xiaodan1; Zhai Yuchun1; Qiu Feng1; Zhang Haixin1; 1Institute of Materials and Metallurgy, Northeastern UniversityOn Closed-Cell Aluminum Foam Used as Train Floor and Side Plate: Lisi Liang1; Guangchun Yao1; Yongliang Mu1; Lei Wang1; 1Institute of Materials and Metallurgy, Northeastern University

Preparation of Aluminum Matrix Composites Reinforced with Nano-SiC Particles by Stir Casting Technique: Li Xiaodan1; Zhai Yuchun1; Qiu Feng1; Zhang Haixin1; 1Institute of Materials and Metallurgy, Northeastern University

Research on Aluminum Foam Railway Noise Barrier: Lisi Liang1; Guangchun Yao1; Lei Wang1; Yongliang Mu1; Zhongsheng Hua1; Jia Ma1; 1Institute of Materials and Metallurgy, Northeastern University

Aluminum Alloys: Fabrication, Characterization and Applications: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


A Mechanism-Based Constitutive Model for Alloy IC10: Hongjian Zhang1; W. Wen1; H. Cui1; Y. Xu1; 1Nanjing University of Aeronautics and Astronautics

Analysis of Metal Flow Behavior during Friction Welding of Tube to Tube Plate Using an External Tool: S. Muthukumaran1; S. Senthil Kumaran1; 1National Institute of Technology

Effect of Age Hardening on Corrosion Behavior of Friction Stir Welded AA 2024 Aluminum Alloy: Muna Abbass1; 1University of Technology

Effect of Alloying Elements on the Electrochemical Behavior of Al-Si-Mg alloys in Aqueous Solutions: Maximo Pech-Canul1; Martin Pech-Canul2; Marbella Echeverría1; Euler Coral-Escobar1; Miguel Montoya-Davila2; 1Cinvestav-Merida; 2Cinvestav-Saltillo

Effect of Friction Stir Processing (FSP) on Particle Erosion Resistance of Casting A384 Aluminum Alloy: Chung-Wei Yang1; Truan-Sheng Lui1; Li-Hui Chen1; Yun-Han Chang1; 1National Cheng Kung University

Effect of Welding Parameters on Microstructure and Properties of 6005A Aluminum Alloy: Kai Ji1; Guangchun Yao1; Guoyin Zu1; Jianchao Shi1; 1School of Materials & Metallurgy, Northeastern University

Microstructure and Wear Characterization of HyperEutectic Al-Si FGM: Kiran Aithal1; N. Narendranath2; Vijay Desai2; P. G. Mukunda1; 1Nitte Meenakshi Institute of Tcehnology; 2NITK

Modification of Hypereutectic Al-17.5%Si Alloy by Nd: Weixi Shi1; Bo Gao1; Ganfeng Tu1; Yi Hao1; Shiwei Li1; 1Northeastern University

Non-Corrosion-Flux-Assisted Wetting and Spreading of Al-Si-Cu-Based Brazing Alloy on 6063 Aluminum: Yefeng Bao1; G. Zhang1; Y, Jiang1; 1Hohai University

Optimization of Ingate Velocity via Gate Design: Pongsak Dulyapraphant1; Prarop Kritboonyarit1; 1National Metals and Materials Technology Center

Prediction of Bake Hardenability of Aluminum Alloys Al6110 and Al7075 Using Neural Network: Niloofar Kamkar Zahmatkesh1; Kamran Dehghani1; 1Amirkabir University of Technology

Preparation of Al-Ti-C Master Alloys from TiO2: Dali Cao1; J. Wang; Z. Shi1; Z. Wang1; Y. Liu1; 1University of Shenyang Chemical Technology

Process Design and Characterization of Bulk Nanostructured Aluminium Alloy by Equal Channel Angular Pressing (ECAP): P. Shanmugasandaram1; N. Narasimhan1; Balasivananda Prabhu1; H. Raja1; 1Anna University

Review of Solidification of Al-Si Alloy under Superhigh Pressure: Guozhi Zhang1; 1Northeastern University

Study on Al/P Diffusion Couples at Lower Temperature: Danqing Yi1; Ying Zhang1; 1Central South University

Study on Recrystallization Behaviors of Alloy IC10 at Elevated Temperature: Hongjian Zhang1; Weidong Wen1; Haitao Cui1; Ying Xu1; 1Nanjing University of Aeronautics and Astronautics

11

Technical Program

Su

n. P

M

Vacuum Thermal Extract Lithium with Coarse Ferrosilicon-Aluminum Alloy Produced by Electro Thermal Process: Di Yuezhong1; Dong Weiwei1; Feng Naixiang1; 1Northeastern University

Biological Materials Science: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Design and Fabrication of Implants for Amputation Prosthesis: Paul DeVasConCellos1; Vamsi Balla1; Susmita Bose1; Amit Bandyopadhyay1; William Dernell2; 1BRC, Washington State University; 2College of Veterinary Medicine, Washington State University

Electro-Thermally Polarized Hydroxyapatite (HAp) Ceramics: Influence of MgO, ZnO, and SrO Dopants: Subhadip Bodhak1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

Electrochemical Corrosion Behavior of Gamma TiAl Alloy Modified by Means of Plasma Electrolytic Oxidation: Laura Lara1; Paul Sundaram1; Nannette Diffoot-Carlo1; 1University of Puerto Rico

Fatigue Behavior of Laser Processed Porous Nitinol: Sheldon Bernard1; Vamsi Balla1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

Fatigue of EBM-Processed Cellular Titanium for Biomedical Applications: Nikolas Hrabe1; Burkhard Fuchs2; Peter Heinl2; Carolin Koerner2; Rajendra Bordia1; 1University of Washington; 2University of Erlangen-Nuremberg

In Vitro Wear of Compositionally and Structurally Graded CoCrMo Ti6Al4V Structures: Stanley Dittrick1; Vamsi Balla1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

Resorbable Tricalcium Phosphates for Bone Tissue Engineering: Influence of SrO Doping: Ken DeVoe1; Shashwat Banerjee1; Amit Bandyopadhyay1; Susmita Bose1; 1Washington State University

Tissue Development in Arabidopsis: 3D Shape Analysis for Detection of Cell Type: Fatma Uyar1; Begum Gulsoy1; Jean Christophe Palauqui2; Marc De Graef1; Anthony Rollett1; 1Carnegie Mellon University; 2Institut Jean-Pierre Bourgin

Characterization of Minerals, Metals and Materials: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Atom Probe Tomography Investigation of a Commercial Dual Precipitation Martensitic Steel: F. Danoix1; R. Danoix1; J. Akre1; D. Delagnes2; A. Grelier3; 1Université de Rouen; 2Ecole des Mines d’Albi-Carmaux; 3Aubert & Duval

Characterization of a Greensand Slate from Abaeté – Brazil to the Synthesis of a Potassium Thermophosphate: Adriana da Silva1; João Sampaio2; Francisco Garrido1; Marta Medeiros1; 1UFRJ; 2CETEM

Characterization of High Carbon Equivalent Cast Iron Using Thermal Analysis Curves: Wenbin Zhou1; Yongshen Yan1; Dengke Zheng1; Qin Hua1; Qijie Zhai1; 1Shanghai University

Characterization of Mechanochemically Synthesized ZrO2-B2O3-Mg System by Thermogravimetry/Differential Thermal Analyses and X-Ray Diffraction Studies: Duygu Agaogullari1; Fikret Aynibal1; Osman C. Demirhan1; Ismail Duman1; 1Istanbul Technical University

Early-Stage Formation of Copper Nanoclusters in Model Reactor Pressure Vessel Steel: Wei Wang1; Bangxin Zhou1; Mindong Lin1; 1Institute of Materials, Shanghai University

Effect of Melt Superheat on Structure of Unsteady-State Unidirectionally Solidified Duplex Stainless Steel: Z.J. Li1; Xiang-ru Chen1; Qijie Zhai1; 1Shanghai University

Effect of Mg, Cu and Ni as Alloying Elements on the Dendritic Growth in an Al-7si Cast Alloy: Aline Hernandez-Garcia1; Alejandro Garcia-Hinojosa1; Francisco Esteves-Alcazar1; Yvan Houbaert2; 1UNAM; 2Gent University

Effect of the Aged Heat Treatment on Al-Zn-Mg Alloys, in Texture, Microstructure and Properties of Corrosion: Aline Hernandez-Garcia1; Bernardo Campillo-Illanes1; Francisco Esteves-Alcazar1; Sergio Serna2; 1UNAM; 2CIICAp-UAEM

Effects of Dolomite on Reduction Swelling Properties of Iron Ore Pellets: Bin Xu1; Tong Hou1; Xu-Ling Chen1; Qian Li1; Tao Jiang1; 1Central South University

Embrittlement of Low Carbon Low Alloy Steel Occurring in the Austenite and γ-Ferrite Regions: Xingjian Gao1; Dengfu Chen1; Mujun Long1; Liwei Song1; Jian Zhang1; Yanyan Bi1; Xianguang Zhang1; 1Chongqing University

FIB-Based Experimental Technique to Determine Phase Fractions of Two-Phase γ Titanium Aluminides: Dennis Peter1; Martin Wagner1; Gunther Eggeler1; 1Ruhr University Bochum

High Resolution Analysis of the Microstructure and Chemistry of a High-Strength Al-Zn-Mg-Cu Alloy: Yi-Yun Li1; Libor Kovarik2; Wen-Hsiung Wang1; Yung-Fu Hsu3; Shan Trong4; Michael Mills2; 1National Taiwan University; 2The Ohio State University; 3National Taipei University of Technology; 4Chung-Shan Institute of Science and Technology

Investigation of Life Prediction in Notched Specimens Subjected to Thermomechanical Loadings: Justin Karl1; 1University of Central Florida

Investigation of Surface Area Change of Bauxite Particle in Digesting Process by Nitrogen Adsorption: Li Bao1; Ting’an Zhang1; Guozhi Lv1; Zhihe Dou1; Yongnan Guo1; Xujian Wu1; Peiyuan Ni1; Jia Ma1; 1Northeastern University

Magnetic and Trasport Properties of Half Doped Manganites: Nitta Swamy1; R. Singh1; 1MATS University, Raipur (C.G)

Mechanical Behavior of Epoxy Composites Reinforced with Acetylation-Treated Coir Fibers: Helvio Santafe1; Lucas Costa1; Ruben Jesus Rodriguez1; Felipe Lopes1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

Microstructural Evolution and Tensile Behavior in Heat-Treated Ti-5111 Alloy: Vikas Dixit1; John Sosa1; Daniel Huber1; Peter Collins1; Hamish Fraser1; 1The Ohio State University

Microstructural Evaluation of Mullite as a Function of the Parameters of Sintering with Microwave: Maria Brasileiro1; Daniele Cavalcante2; Elieber Bezerra1; Romualdo Menezes1; Gelmires Neves1; Heber Ferreira1; Lisiane Santana1; 1Universidade Federal de Campina Grande; 2Universidade Federal da Paraíba

Novel Techniques for the Investigation of the Mechanical Properties of Single Crystal Iridium: Douglas Stauffer1; Ryan Major2; William Gerberich1; 1University of Minnesota; 2Hysitron, Inc.

On the Precipitation of the Omega Phase in the Beta Matrix of Titanium Alloys: Arun Devaraj1; Robert Williams2; Soumya Nag1; Srinivasan Rajagopalan2; Srinivasan Srivilliputhur1; Hamish Fraser2; Rajarshi Banerjee1; 1University of North Texas; 2The Ohio State University

Onset of Void Coalescence Studied by X-Ray Computed Tomography: Akihide Hosokawa1; David Wilkinson1; Eric Maire2; 1McMaster University; 2INSA-Lyon


12

Technical Program

Su

n. P

M

Phase Equilibria in the La1-xCaxFeO3-d System: Patrick Price1; Ellen Rabenberg1; David Thomsen1; Darryl Butt1; 1Bosie State University

Precipitate Characterization in a NiAl-Strengthened Ferritic Steel: Zhenke Teng1; Michael Miller2; Peter Liaw1; Chain Liu1; 1University of Tennessee, Knoxville; 2Oak Ridge National Laboratory

Semi-Automated Characterization of the Gamma Prime Phase in Ni-Based Superalloys via High-Resolution Backscatter Electron Imaging, Segmentation, and Stereology: Eric Payton1; Patrick Phillips1; Michael Mills1; 1Ohio State University

Surface Characterization of Single and Mixed Mineral Systems Using Sedimentation Potential: Salah Uddin1; Mitra Mirnezami1; James Finch1; 1McGill University

Synthesis of Lanthanum Orthophosphate and Polyphosphate in Condensed Phosphoric Acid Solutions: Naoyuki Hatada1; Yoshitaro Nose1; Tetsuya Uda1; 1Kyoto University

Temperature and Orientation Dependence of the Plastic Flow Behavior of Tantalum: Zhi Duan1; Andrea Hodge1; 1University of Southern California

The Development of Databases Relating Microstructure and Mechanical Properties in Ti-5Al-5Mo-5V-3Cr-0.5Fe (Timetal 555): John Foltz1; B. Welk1; P. Collins1; J. Williams1; H. Fraser1; 1The Ohio State University

The Effect of Y on the Refinement of Cast and Rapidly Solidified TiAl Alloys: Zhiguang Liu1; Lihua Chai1; Yuyong Chen1; 1Harbin Institute of Technology

The Microstructure and Mechanical Behavior of Fe30Ni20Mn30Al20 Alloys: Xiaolan Wu1; Ian Baker1; Hong Wu1; Micheal Miller2; Kaye Russell2; 1Thayer School of Engineering, Dartmouth College; 2Materials Science and Technology Division, Oak Ridge National Laboratory

Thermodynamic Research of the Dissolving of Chrysocolla (Cusio3•H2O) in the Ammonia-Ammonium Chloride-Water System: Liu Wei1; Tang Motang1; Tang Zhaobo1; He Jing1; Yang Jianguang1; Yang Shenghai1; 1Central South University

Three-Dimensional Atom-Probe Tomography of High-Strength Low-Carbon Steels Containing Multiple Phases: Mike Mulholland1; David Seidman1; 1Northwestern University

Ultrasonic Characterization of Copper using Wavelet Analysis: Prasad Shanmugasandaram1; Narayani Narasimhan1; Kalayappan Srinivasan1; Praveen Selvaraj1; 1Anna University

Computational Thermodynamics and Kinetics: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign

Sun PM-Wed AM Room: 308February 14, 2010 Location: Washington State Convention Center

Atomistic Modeling of Solid-Liquid Interfaces Subject to Lateral Stresses: T. Frolov1; Y. Mishin1; 1George Mason University

Atomistic Simulation of Segregation Coefficient of High Concentration Ni-Cu Alloys: Harith Humadi1; Jeff Hoyt1; Mark Asta2; Yang Yang3; 1McMaster University; 2University of California, Berkeley; 3East China Normal University

Developing Reliable Interatomic Potentials for HCP Mg-Li Alloys from Ab Initio and Experimental Data: Alex Welcing1; 1University of North Texas

Development of Reliable Interatomic Potentials for HCP Mg-Li Alloys from Ab Initio and Experimental Data: Alex Welcing1; Srinivasan Srivilliputhur1; M. Baskes2; Alfredo Caro3; 1University of North Texas; 2Los Alamos National Laboratory; 3Lawrence Livermore National Laboratory

Diffusion on Al-Type Sites in Intermetallic Phases Having the Tetragonal Al4Ba Structure: Gary Collins1; Randal Newhouse1; Samantha Cawthorne1; 1Washington State University

Effects of Tempering on Fe-Atom Vibrations in Martensitic Steel: Lisa Mauger1; Brent Fultz1; 1California Institute of Technology

First-Principles Calculations on Impurity Substituted Cementite: Chaitanya Krishna Ande1; Marcel Sluiter2; 1Materials Innovation Institute, Delft University of Technology; 2Delft University of Technology

Grain Boundary and Interfacial Energy Database for Fe in a Suitable Form for Simulation of Microstructure Evolution: Hyun-Kyu Kim1; Seong Gyoon Kim2; Byeong-Joo Lee1; 1POSTECH; 2Kunsan National University

Grain Growth Stagnation due to Grain Boundary Roughening: Elizabeth Holm1; Stephen Foiles1; 1Sandia National Laboratories

Kinetics of ALN Precipitation in the Ferrite Phase Field of Microalloyed (HSLA) Steels: Rene Radis1; E. Kozeschnik1; 1Vienna University of Technology

Kinetics of Corrosive Defects Formed on Au Substrates Accompanied by Alkanethiol Monolayer Assembly in the Presence of Oxygen: Zhong Cao1; Pu-Ni Zeng1; Xiao-Chuan He1; Dao-Chang Huang1; Ling Zhang; 1Changsha University of Science and Technology

Modeling of Cementite Formation in Extra and Ultra Low Carbon Steels: Jong Min Choi1; Bong June Park1; Sung Il Kim2; Kyung Sub Lee1; Kyung Jong Lee1; 1Hanyang University; 2POSCO

Modeling of Phase Transformation Behaviors by Cementite Formation at Isothermal Bainite Transformation Region in TRIP-Assisted Steels: B. J. Park1; J. M. Choi1; S. Il Kim2; Kyung Jong Lee1; 1Hanyang University; 2POSCO

Monte Carlo Simulation of Multiferroic BiFeO3: Yang Yang1; Jiangyu Li1; 1University of Washington

Multiscale Modelling of Grain Growth in Nanocrystalline Iron: Tomasz Wejrzanowski1; Krzysztof Kurzydlowski1; 1Warsaw University of Technology

Phase Field Modeling of Grain Size Dependent Particle Pinning: Sina Shahandeh1; Matthias Militzer1; 1University of British Columbia

Phase Field Modelling of Austenite Formation from a Ferrite-Carbide Lamella Structure: Hamid Azizi-Alizamini1; Matthias Militzer1; Warren Poole1; 1UBC

Phase Field Simulations of Growth and Coarsening of Electrocatalyst Particles: Megna Shah1; Scott Barnett1; Peter Voorhees1; 1Northwestern University

Simulation of Austenite-Martensite Interface and Hysteresis in Microstructures: Chi Hou Lei1; 1University of Washington

The Effect of Quenched-in Vacancies on the Kinetics of Coherent Cu-Precipitation in Fe-Cu Alloys: Ivan Holzer1; Ernst Kozeschnik2; 1Graz University of Technology; 2Vienna University of Technology

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Deformation in Two-Phase Titanium Alloys Studied by Surface Strain Mapping Techniques: R. Sandala1; J. Quinta da Fonseca1; Michael Preuss1; 1University of Manchester

Delamination in Al-Li Alloys: Armand Beaudoin1; Roy Crooks2; Sean Hamel1; Mark Hernquist1; Russell McDonald1; Wes Tayon1; 1University of Illinois at Urbana-Champaign; 2National Institute of Aerospace

13

Technical Program

Su

n. P

M

In-Situ 3D Observation of Short Crack Propagation in Titanium Alloys: Soran Birosca1; J. Y. Buffiere2; M. Preuss1; 1University of Manchester; 2Universite de Lyon

Kinetics Aspects of Phase Transformation in a Ti-Al-Nb Gamma+Sigma Alloy: Sonalika Goyel1; M. Kesler1; O. Rios1; D. Cupid2; H. Seifert2; F. Ebrahimi1; 1University of Florida; 2Freiberg University of Mining and Technology

Jim Evans Honorary Symposium: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Jae-Chun Lee, Korea Institute of Geoscience and Mineral Resources

A Novel Process for Separating Silver from Waste Lead-Free Solder: Byung-Su Kim1; Jae-chun Lee1; 1Korea Institute of Geoscience and Mineral Resources (KIGAM)

Separation of Ag and Cu from Waste Pb-Free Tin Solder by Nitric Acid Leaching: Kyoungkeun Yoo1; Jae-chun Lee1; Soo-kyoung Kim1; Jinki Jeong1; 1Korea Institute of Geoscience and Mineral Resources (KIGAM)

Magnesium Technology 2010: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Assessing Data in Support of Structure-Processing-Property Relationships in Mg-Alloy Design: Kim Ferris1; Dumont Jones2; 1Pacific Northwest National Laboratory; 2Proximate Technologies, LLC

Complex Microstructure Consisting Precipitates and Long Periodic Stacking (LPS) Phases in Mg97Zn1Y2-X (Ce, Nd, Sm)X Alloys: JongBeom Lee1; Toyohiko J Konno2; Kenji Hiraga2; 1Tohoku University; 2Institute for Materials Research, Tohoku University

Effect of CaO and Al Contents on Tensile Properties of Creep Resistant Eco-Mg Alloys: Jung ho Seo1; Shae K. Kim1; 1Korea Institute of Industrial Technology

Effect of Microstructure and Texture on Property of Friction Stir Processed Mgnesium Alloy AZ31B: Wei Yuan1; Rajiv Mishra1; 1Missouri University of Science and Technology

Effect of Zr Addition on Microstructural Evolution and Mechanical Properties of Mg-Zn-Y Alloy: JoonSeok Kyeong1; WonTae Kim2; DoHyang Kim1; 1Yonsei University; 2Cheongju University

Experimental and Computational Simulation of the Post-Warm Forming Constitutive Behavior of AZ31: Frederick Polesak1; Babak Raeisinia1; Sean Agnew1; 1University of Virginia

Experiments and Modeling of Fatigue in an Extruded Magnesium Alloy: J. Gibson1; J. Jordon1; M. Horstemeyer1; 1Mississippi State University

Fatigue Crack Propagation Behavior of Wrought Mg-Zn Alloys: Kyosoo Song1; Hwa Chul Jung1; Kwang Seon Shin1; 1Seoul National University

Finite Element Simulation of Mg Warm Sheet Forming Operations: Babak Raeisinia1; Louis Hector2; Paul Krajewski2; Sean Agnew1; 1University of Virginia; 2GM

Generic Materials Property Data Storage and Retrieval for Alloy Material Applications: Dumont Jones1; Kim Ferris2; 1Proximate Technologies, LLC; 2Pacific Northwest National Laboratory

In-Situ Scanning Electron Microscopy Comparison of Deformation Behavior between AZ31 and WE43 Magnesium Alloys: Tomoko Sano1; Bruce Davis2; Richard DeLorme2; Kyu Cho1; 1US Army Research Lab; 2Magnesium Elektron North America Inc.

Microstructure and Corrosion Properties of Rapidly Solidified Mg-Zn-Y-X Alloys: S.W. Nam1; Do H. Kim1; H.K. Lim1; W. T. Kim1; D.H. Kim1; 1Cheongju University

Phase Structures and Phase Relationships of the Alloys of Mg-Zn-La System at 400°: Mingli Huang1; 1School of Materials and Metallurgy, Northeastern University

Recovery and Static Recrystallization of Magnesium Alloy AZ31: Zohreh Keshavarz1; Aiden Beer1; 1Deakin University

Role of Quasicrystalline Phase in Mechanical Properties of Mg-Sn-Zn-Al Alloys: Young Kyun Kim1; Do Hyung Kim1; Joon Seok Kyeong1; Won Tae Kim2; Do Hyang Kim1; 1Yonsei University; 2Cheongju University

Texture and Anisotropy of Continuous Cast(CC) and Direct Chill Cast (DC) AZ31 Magnesium Sheets: Sooho Kim1; Raja Mishra1; Jon Carter1; 1GM R&D Center

Thermo-Mechanical Processing Design of Mg Alloys with High Strength and Formability via Twin-Roll Casting: G.T. Bae1; D. Li1; H. Garmestani1; K.-H. Kim2; J.H. Bae2; Nack J. Kim2; 1Georgia Institute of Technology; 2Pohang University of Science and Technology

Ultra Light Metallic Armor (ULMA)- Magnesium Hard Alloys as the Defense against Modern Warfare Threats: Rick Delorme1; Bruce Davis1; Kyu Cho2; Jonathan Montgomery2; 1Magnesium Elektron North America; 2Army Research Laboratory

Void Nucleation and Growth Behavior of Mg Alloy: A Study by X-Ray Microtomography and Finite Element Analysis: Ji Hoon Yoo1; Dae Ha Lim1; Jae-Hong Lim1; Jung Ho Je1; Hyoung Seop Kim1; 1Postech

Neutron and X-Ray Studies of Advanced Materials III: Poster SessionSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


X-Ray Characterization of the a-Si/HfO2 Interface: Sandeep Kohli1; 1Colorado State University


14

Technical Program

Su

n. P

M

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology

Characterization of Metal Whisker Growth in Sn-Based Solders: Guangchen Xu1; Dongyue Zhang1; Hu Hao1; Mengke Zhao1; Yaowu Shi1; Fu Guo1; 1Beijing University of Technology

Impression Creep of Pb: Fuqian Yang1; Rong Chen1; 1University of Kentucky

Interfacial Reaction and Joint Reliability of Electrodes Bonded with Transverse Ultrasonic: Jong-Bum Lee1; Jong-Gun Lee1; Seung-Boo Jung1; 1Sungkyunkwan University

Mechanical Properties of Intermetallic Properties in Lead-Free Solder Materials: Chandra Rao Bhesetti1; K.Y. Zeng2; V. Kripesh3; 1National University of Singapore, Department of Mechanical Engineering - and - A*STAR (Agency for Science, Technology and Research), Institute of Microelectronics; 2National University of Singapore, Department of Mechanical Engineering; 3A*STAR (Agency for Science, Technology and Research), Institute of Microelectronics

Microvoid Formation at Solder-Copper Interfaces during Annealing: A Systematic Study of the Root Cause: Santosh Kumar1; Carol Handwerker1; Joseph Smetana2; David Love3; James Watkowski4; Richard Parker5; 1Purdue University; 2Alcatel-Lucent; 3Sun Microsystems, Inc.; 4MacDermid Inc; 5Delphi Electronics & Safety

Observations of IMC Formation for Au Wire Bonds to Al Pads: John DeLucca1; John Osenbach1; Frank Baiocchi1; 1LSI Corporation

Optimization of Solutions to Electrodeposit Sn-Based Pb-Free Solders: Neda Dalili1; Anqiang He1; Qi Liu1; Douglas Ivey1; 1University of Alberta

Orientation Imaging Studies of Sn3.0Ag0.5Cu Solder Joint with Various Ni Doping after Aging: Tae-Kyu Lee1; Kuo-Chuan Liu1; Kai-Jheng Wang2; Jo-Mei Wang2; Chien-Fu Tseng2; Jenq-Gong Duh2; 1CISCO; 2National Tsing Hua University

Polycrystalline Sn Whisker Growth: Aleksandra Dimitrovska1; Radovan Kovacevic1; 1SMU

Solidification of the Sn-Cu-Ag Eutectic Alloy: Yoshiko Takamatsu1; Hisao Esaka1; Kei Shinozuka; 1National Defense Academy

Study of Emerging New Interconnect Methods: How Far SMT Will Go: Idelcio Cardoso1; Josineto Costa1; 1INdT

Study of UBM Consumption in Flip Chip Solder Joints with Local Temperature Control: Ting-Li Yang1; Y. L. Lin1; H. Y. Chuang1; C. Robert Kao1; 1National Taiwan University

Study on Paste Printing for Electronics: Rafael Mancosu1; Ocileide Silva1; Renato Bonadiman1; 1Nokia Technology Institute

The Effect of Temperature on the Critical Cu Concentration in SnCu/Ni Reaction: Pei-Hsuan Wu1; C. Robert Kao1; 1National Taiwan University

Thermal and Electrical Evaluation of GaAs Flip-Chip after Thermal Reliability Test: Young-Chul Lee1; Jong-Woong Kim1; Kwang-Seok Kim1; Seung-Boo Jung1; 1Sungkyunkwan University

Surface Engineering for Amorphous-, Nanocrystalline-, and Bio-Materials: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS: Surface Engineering CommitteeProgram Organizers: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International Univesity; Sudipta Seal, University of Central Florida; Narendra Dahotre, University of Tennessee

Sun PM-Tues PM Room: 604February 14, 2010 Location: Washington State Convention Center

Pulse Electrodeposition of Bio-Coatings: Tushar Borkar1; Sandip Harimkar1; 1Oklahoma State University

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi

A Molecular Dynamics Study of a Deformation Behavior of Nanocrystalline Palladium: Dmitriy Bachurin1; Peter Gumbsch1; 1University of Karlsruhe

A Multi-Scale Approach in Understanding Grain Boundary (GB) Effects on Fatigue Crack Initiation from the Energies of Slip-GB Interactions: Michael Sangid1; Huseyin Sehitoglu1; 1University of Illinois, Urbana-Champaign

Ab Initio Study of the Core Structure and Kinks of Screw Dislocations in Fe and W: Lisa Ventelon1; François Willaime1; Emmanuel Clouet1; Mihai-Cosmin Marinica1; 1CEA

Accurate Description of Elastic Properties of Random Alloys with Minimum Supercell Sizes: Johann von Pezold1; Alexey Dick1; Martin Friák1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung GmbH

Computer Simulation of the Two-Nanoparticles Agglomeration: Ilya Karkin1; Yuri Gornostyrev1; Lidia Karkina1; 1Institute of Metal Physics

Dislocation-Based Modeling of Yield Strength of Multilayer Thin Films with Nanoscale Microstructures: Qizhen Li1; 1University of Nevada, Reno

Effect of Chemical Composition and Applied Stresses on the Martensitic Transformation in NiAl: G. P. Pun1; Y. Mishin1; 1George Mason University

Evaluation of Phason Elastic Constants from HRTEM Image of a Dislocation in Icosahedral Quasicrystals: Yeong-Gi So1; Yasushi Kamimura1; Keiichi Edagawa1; 1Institute of Industrial Science, University of Tokyo

Molecular Dynamics Simulation of Reactions Forming Ni-Al Nanoparticles: Alexander Evteev1; Elena Levchenko1; Daniel Riley2; Irina Belova1; Graeme Murch1; 1The University of Newcastle; 2The University of Melbourne

New Tools and Methods for Analyzing Deformed Materials: Woosong Choi1; Yong Chen1; Stefanos Papanikolaou1; James Sethna1; 1Cornell University

15

Technical Program

Su

n. P

M

Partitioning and Site Preference of Rhenium or Ruthenium in Model Ni-Based Superalloys: An Atom-Probe Tomographic and First-Principles Study: Yang Zhou1; Zugang Mao1; Christopher Booth-Morrison1; David Seidman1; 1Northwestern University

Pd2Ni Surface-Sandwich Ordering at the Nanoscale: Atomistic Simulations and First-Principles Calculations: Elena Levchenko1; Alexander Evteev1; Irina Belova1; Graeme Murch1; 1The University of Newcastle

Quantitative Analysis and CPFEM Simulation of Deformation System Activity in Commercial Purity Ti Deformed in Tension: Yiyi Yang1; Leyun Wang1; Philip Eisenlohr2; Yunjo Ro2; Thomas Bieler1; Martin Crimp1; 1Michigan State University; 2Max-Planck-Institut für Eisenforschung GmbH

Role of Artificial Neural Networks in Materials Science Research: N. S. Reddy1; Jae Sang Lee1; Y.M. Koo1; 1GIFT, POSTECH, Pohang, Korea

Sliding Behavior of Favoured and Non-Favoured Boundaries in Zinc: Askar Sheikh-Ali1; 1Kazakh-British Technical University

Structure and Energetics of the Stacking Faults in Austenitic FeMn Alloys Studied by First Principles Calculations: Alexey Dick1; Tilmann Hickel1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung GmbH

The Influence of Substitutional Solutes on Nucleation of Dislocations from Cracktips in Alpha-Fe: Peter Gordon1; Neeraj Thirumalai1; 1ExxonMobil Research and Engineering

Thermodynamic Study of the Neptunium-Zirconium System: Saurabh Bajaj1; Andres Garay2; Raymundo Arroyave1; Cem Sevik1; Tahir Cagin1; Patrice Turchi3; 1Texas A&M University; 2CINVESTAV Queretaro; 3Lawrence Livermore National Laboratory

Ultrafine Grained Materials – Sixth International Symposium: Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chair: Terry Lowe, Manhattan Scientifics, Inc.

Anisotropy of the Fracture Behaviour of Severly Deformed Iron and a Pearlitic Rail Steel: Anton Hohenwarter1; Christoph Kammerhofer1; Reinhard Pippan1; 1Erich Schmid Institute of Materials Science, Austrian Academy of Sciences

Crystal Plasticity Simulation of Equal Channel Angular Pressing of Aluminium Single Crystals with Different Initial Orientations: Guanyu Deng1; Cheng Lu2; Lihong Su1; Xianghua Liu3; Kiet Tieu2; 1University of Wollongong and Northeastern University; 2University of Wollongong; 3Northeastern University

Deformation and Microstructure of Ferrous Alloy Processed by Continuous Shear Drawing: Chul Won Lee1; Young Gun Ko2; Seung Namgung1; Kang Min Lee1; Dong Hyuk Shin1; 1Hanyang University; 2Yeungnam University

Deformation Characteristics Evaluation of Modified Equal Channel Angular Pressing Processes: Ji Hoon Yoo1; Seung Chae Yoon1; Anumalasetty Venkata Nagasekhar2; Hyoung Seop Kim1; 1POSTECH; 2The University of Queensland

Deformation Twinning in Boron Carbide Particles: Ying Li1; Yonghao Zhao1; Wei Liu1; Zhihui Zhang1; Rustin Vogt1; Enrique Lavernia1; Julie Schoenung1; 1University of California Davis

Equal Channel Angular Pressing of Al-Mg Bimetal: Sapthagireesh Subbarayan1; Hans Roven1; 1NTNU

Evaluation of Ultra-Fine Grained Magnesium Alloy - AZ31 Processed through Constrained Groove Pressing Severe Plastic Deformation Technique: BalaSivanandha Prabhu1; D. Sathish Kumar1; Preethi Balan1; Jayanthi Shanmugam1; A. Sekar1; 1Anna University

Experimental and Finite Analyses of Pressure Effect on the Plastic Deformation and Microstructural Evolution of Copper during High Pressure Torsion: Eun Yoo Yoon1; Soo Hyun Joo1; Chong Soo Lee1; Hyoung Seop Kim1; 1POSTECH

Experimental Studies of Subsurface Strains and Microstructures in Severe Plastic Deformation by Machining: Yang Guo1; Matthew Hudspeth1; Srinivasan Chandrasekar1; 1Purdue University

Fabrication of Nanostructured Bulk Copper with High Strength and High Conductivity (HSHC): Microstructure and Properties: Timothy Lin1; 1Aegis Technology Inc.

Finite and Experimental Analyses of Ultrafine Microstructure Evolution and Plastic Deformation of Copper under Various Pressures by High Pressure Torsion: Eun Yoo Yoon1; Soo Hyun Joo1; Dong-Wook Kim1; Nack J. Kim2; Chong Soo Lee1; Hyoung Seop Kim1; 1POSTECH; 2Center for Advanced Aerospace Materials

Finite Element Analyses of Plastic Deformation Behavior on the Geometry Effect during High Pressure Torsion: Soo Hyun Joo1; Chong Soo Lee1; Hyoung Seop Kim1; 1POSTECH

Forced Atomic Mixing of Immiscible Ternary Alloys during Severe Plastic Deformation: Nhon Vo1; Robert Averback1; Thuy Nguyen2; Michael Campion1; Shankar Sivaramakrishnan1; Brad Stumphy1; Pascal Bellon1; 1University of Illinois, Urbana-Champaign; 2Hanoi University of Technology

Geometry Effect Study on Plastic Deformation Behavior during High Pressure Torsion with Finite Element Method: Soo Hyun Joo1; Chong Soo Lee1; Hyoung Seop Kim1; 1POSTECH

Improving Strength and Ductility of Ultra-Fine Grained 5052 Al Alloy by Cryogenic and Warm Rolling: Ui Gu Kang1; Jong Chul Lee1; Shin Woong Joung1; Won Jong Nam1; 1Kookmin University

Interstitial-Assisted Strengthening Mechanism of Ultrafine Grained Pure Aluminium Processed by ECAP: Lihong Su1; Cheng Lu2; Guanyu Deng1; Lizi He3; Xudong Sun3; Kiet Tieu2; 1University of Wollongong and Northeastern University; 2University of Wollongong; 3Northeastern University

Microstructure and Properties of Ultrafine-Grained Steel Produced by Warm Compression of Martensite: Xin Zhao1; 1Zhengzhou Institute of Aeronautics

Nanostructured Commercially Pure Titanium Prepared via Cryomilling and High Pressure Torsion (HPT): Osman Ertorer1; Ying Li1; Yonghao Zhao1; Ruslan Valiev2; Enrique Lavernia1; 1University of California - Davis; 2Ufa State Aviation Technical University

Reported Ductilities in Ultrafine Grain Metals and Confusion Regarding Measurement: Kaoru Yamamoto1; Amit Ghosh1; 1University of Michigan

Spheroidization of High-Carbon Steel Processed by Equal Channel Angular Pressing: Seung Namgung1; Chul Won Lee1; Dong Hyuk Shin1; Jae Sik Lee2; Young Gun Ko2; 1Hanyang University; 2Yeungnam University

Strain Hardening Behavior of Ultra-Fine Grained 5083 Aluminum Alloy: Troy Topping1; Ying Li1; Zhihui Zhang1; Enrique Lavernia1; 1University of California, Davis

Texture and Microstructure Evolution in Ultrafine Grained AZ31 Processed by EX-ECAP: Milos Janecek1; Sangbong Yi2; Radomir Kuzel1; Jitka Vratna1; Karl Kainer2; 1Charles University; 2GKSS Research Centre

The Effect of Friction Stir Welding on the Microstructure and Mechanical Behavior of Continuously Equal-Channel Angular Pressed (CECAP) A5052 Alloy Sheets: Nilesh Kumar1; Rajiv Mishra1; Gaurav Mohanty2; Santosh Karthik2; Krishna Rajan2; 1Missouri University of Science & Technology; 2Iowa State University


16

Technical Program

Mo

n. A

M

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Electrical Properties of NanomaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Monday AM Room: 214February 15, 2010 Location: Washington State Convention Center

Session Chair: Jud Ready, Georgia Tech; Seung H. Kang, Qualcomm Inc

8:30 AM Introductory Comments

8:35 AM InvitedSchottky Diodes on Nanowires of Cadmium Telluride and Copper Indium Diselenide Embedded in Porous Alumina Templates: Vijay Singh1; 1University of Kentucky

8:55 AMElectronic Transfer in Molecular Nanostructures: Karel Kral1; 1Inst. Phys. ASCR, v.v.i.

9:15 AMEffect of the Nanocrystalline Structure of Metallic Cathodes on the Efficiency of Ion-Induced Electron Emission: Radik Mulyukov1; Rinat Khisamov1; Konstantin Nazarov1; Yulai Yumaguzin2; Ayrat Nazarov1; 1Institute for Metals Superplasticity Problems, Russian Academy of Sciences; 2Bashkiria State University

9:35 AMElectrical Conductance of Single TiO2 Nanotube Devices: Jie Huang1; Dongkyu Cha1; Mingun Lee1; Moon Kim1; Jiyoung Kim1; 1University of Texas at Dallas

9:55 AMEnhancing Electrical Performance of Solution Processed Doped ZnO Film by Nanowire Alignment: Sujay Phadke1; Jung-Yong Lee1; Jack West2; Alberto Salleo1; 1Stanford University; 2Stanford University/Sequoia High School

10:15 AM Break

10:25 AM3D Carbon Nanotube based Photovoltaic Devices: Jack Flicker1; Jud Ready2; 1Georgia Institute of Technology; 2Georgia Tech Research Institute

10:45 AMCuO Nanowire-Co3O4 Nanoparticle Heterostructures for the Development of Multi-Functional Photocatalyst: Wenwu Shi1; Nitin Chopra1; 1The University of Alabama

11:05 AMCNT Based Thermoelectric Devices for Energy Harvesting: David Lashmore1; Tom VanVechten1; Jennifer Mann1; Cory Timoney1; Ian Wilson1; 1Nanocomp

11:25 AMSynthesis of Tin Filled Carbon Nanotubes and Their Application to Lithium Ion Batteries: Raj Das Gupta1; Carsten Schwandt1; Derek Fray1; 1University of Cambridge

11:45 AMRadar Absorption Properties of Radar Absorbing Structures Composite Filling with Carbon Nanotubes: Zhengquan Zhang1; Tiehu Li1; 1Northwestern Polytechnical University

12:05 PMStudy of the AC Conductivity Affected by Crystallization and CNFs for PVDF/CNF Composite Thin Films: Lili Sun1; Bin Li1; Weihong Zhong1; Yan Zhao2; 1Washington State University; 2Beihang University

12:25 PM Concluding Comments

Advances in Composite, Cellular and Natural Materials: Natural Materials and Polymer Matrix CompositesSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: Lorna Gibson, Massachusetts Institute of Technology; Amy Johnson, University of Illinois at Urbana-Champaign

8:30 AMAlpha-helical Protein Networks Are Self-Protective and Flaw-Tolerant: Markus Buehler1; 1Massachusetts Institute of Technology

8:50 AMMechanical Behavior of Natural Sisal Fibers: Flavio Silva1; Nik Chawla1; Romildo Toledo Filho2; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering; 2Civil Engineering Department, COPPE, Universidade Federal do Rio de Janeiro

9:10 AMDevelopment of Eco-Friendly Brake Friction Composites: Yafei Lu1; Baoting Suo1; Hui Wang1; Yimei Lu1; 1Beijing University of Chemical Technology

9:30 AMEnergy Attenuation Capability of Woven Natural Silk (WNS)/Epoxy Composites Plates Subjected to Drop-Weight Impacts: Albert Uchenna Ude1; Che Husna Azhari1; Kamauzzaman Sopian1; 1The National University of Malaysia (UKM)

9:50 AMStrain Rate Effects on the Deformation Behavior of Particles in Epoxy-Based Composites: Bradley White1; Jonathan Spowart2; Jennifer Jordan3; Naresh Thadhani1; 1Georgia Institute of Technology; 2AFRL/RXLMD; 3AFRL/RWME

10:10 AM Break

10:30 AMReactive Polymeric Nanocomposites: Christopher Crouse1; Christian Pierce1; Jonathan Spowart1; 1Air Force Research Laboratory

10:50 AM InvitedB/SiOx Nanonecklace Reinforced Nanocomposites by Unique Mechanical Interlocking Mechanism: Xinyong Tao1; Jie Liu1; Goutam Koley1; Xiaodong Li1; 1University of South Carolina

11:10 AMA Review of Fiber Waviness and Its Effect on Material Properties: Bryan Allison1; Jeff Evans1; 1University of Alabama in Huntsville

11:30 AMStructure and Capability of TiB2/UHMWPE Composite Shielding Material for Nuclear Radiation: Xiaozhou Cao1; Xiangxin Xue1; Ting’an Zhang1; Xianwei Hu1; 1Northeastern University

17

Technical Program

Mo

n. A

M

Aluminum Alloys: Fabrication, Characterization and Applications: Development and ApplicationSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: John Chinella, U.S. Army Research Laboratory

8:30 AMHigh Strength and High Temperature Aluminum Alloys for High Performance Applications: Awadh Pandey1; Jonathan Spowart1; 1Pratt & Whitney Rocketdyne

8:50 AMScandium/Zirconium Modified Aluminum Alloys for Improved Mechanical and Corrosion Properties: Jennifer Gaies1; 1NSWC Carderock Division

9:10 AMTRIMAL 52® - A New Aluminium Alloy for High Performance Spaceframe Construction: Marcel Rosefort1; Horst Gers2; Thomas Koehler1; Jana Ehrke1; Dirk Schnapp2; Hubert Koch1; 1Trimet Aluminium AG; 2Honsel AG

9:30 AMHigh-Temperature Fatigue Deformation Behavior of Heat-Resistant Aluminum Alloy for Automobile Parts: Jong-Soo Park1; Si-Young Sung2; Bum-Suk Han2; Chang-Yeol Jung3; Kee-Ahn Lee4; 1Center for Advanced Green Materials Technology, Andong National University; 2Korea Automotive Technology Institute; 3Korea Institute of Industrial Technology; 4Department of Advanced Material Science and Engineering, Andong National University

9:50 AM Break

10:05 AMOptimized Heat Treatment Sequence for AA 6061: Christian Zelger1; Josef Schnitzlbaumer1; Ramona Prillhofer1; Josef Enser1; Carsten Melzer1; 1AMAG Rolling

10:25 AMMicrostructure, Mechanical Characterization and Hot Tensile Behaviour of Al-Zn-Mg Modified Alloys: Paola Leo1; Emanuela Cerri1; Hugh J. McQueen2; 1University of Salento; 2Concordia University

10:45 AMCast Aluminum Housings in Electrical Fires: Joel Liebesfeld1; 1Countermeasure Security, Inc.

11:05 AMInfluence of the Grain Size on the IGC, Crack Propagation and Fracture Toughness Behaviour of Aa2024-T3 Sheet Material: Josef Berneder1; Reinhard Rachlitz1; Carsten Melzer1; Helmut Antrekowitsch2; Peter Uggowitzer3; 1AMAG Rolling; 2University of Leoben; 3ETH Zürich

11:25 AMMicrostructure and Mechanical Properties of Age-Hardening Al-Li-Sc-Yb, Al-Li-Sc, and Al-Sc Alloys: Matthew Krug1; David Seidman1; David Dunand1; 1Northwestern University

Biological Materials Science: Bio-inspired Materials Design and Processing I: Macromolecular Concepts and ApplicationsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chair: John Nychka, University of Alberta

8:30 AM Introductory Comments by John A. Nychka, 2010 Lead Organizer

8:35 AM KeynoteFrom Materials Science to Medicine Using Genetically Engineered Peptides: Mehmet Sarikaya1; 1University of Washington

9:15 AMElectronic Transport through Solid-Binding Peptides: Yuhei Hayamizu1; Marketa Hnilova1; Ersin Emre Oren1; Chao Zhong1; Candan Tamerler1; Marco Rolandi1; Mehmet Sarikaya1; 1University of Washington

9:35 AMComputational Biomimetic Design of Materials Specific Peptides: Ersin Emre Oren1; Ram Samudrala1; John S. Evans2; Malcolm L. Snead3; Martha J. Somerman1; Candan Tamerler4; Mehmet Sarikaya1; 1University of Washington; 2New York University; 3University of Southern California; 4Istanbul Technical University

9:55 AMBridging Inorganic Nanoparticles and Biomolecules via Genetically Engineered Peptides: Turgay Kacar1; Marketa Hnilova1; Banu Taktak2; Yuhei Hayamizu1; Ersin Emre Oren1; John Evans3; Candan Tamerler1; Mehmet Sarikaya1; 1University of Washington; 2Istanbul Technical University; 3New York University

10:15 AM Break

10:25 AMPeptide-Mediated Formation of Hybrid Metallic Nanostructures: Marketa Hnilova1; Hanson Fong1; Banu Taktak2; Turgay Kacar1; Candan Tamerler1; Mehmet Sarikaya1; 1University of Washington; 2Istanbul Technical University

10:45 AMIn Situ Biomineralization Using Peptides via SPR and QCM: Brandon Wilson1; Eugene Ngai1; James Park1; Mustafa Gungormus1; Marketa Hnilova1; Candan Tamerler2; Mehmet Sarikaya1; 1University of Washington; 2Istanbul Technical University

11:05 AMSelf-Mineralized/Self Assembled Peptide-Based Hydrogels as Scaffolds for Tissue Regeneration: Mustafa Gungormus1; Monica Branco2; Hanson Fong1; Candan Tamerler1; Joel Schneider2; Mehmet Sarikaya1; 1University of Washington; 2University of Delaware

11:25 AMPeptide-Based Biofunctionalization of Implant Materials: Dmitriy Khatayevich1; Mustafa Gungormus1; Christopher So1; Sibel Cetinel2; Hong Ma1; Alex Jen1; Candan Tamerler2; Mehmet Sarikaya1; 1University of Washington; 2Istanbul Technical University

11:45 AMDirected Assembly and Fabrication by Materials Selective Fusion Protein-Peptides: Candan Tamerler1; Mehmet Sarikaya2; 1Istanbul Technical University; 2University of Washington


18

Technical Program

Mo

n. A

M

Bulk Metallic Glasses VII: Structures and Mechanical Properties ISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: Takeshi Egami, University of Tennessee; Peter Liaw, University of Tennessee

8:30 AM KeynoteMechanical Failure and Glass Transition: Takeshi Egami1; Pengfei Guan2; Mingwei Chen2; 1University of Tennessee; 2WPI-AIMR, Tohoku University

9:00 AMEmbrittlement of Bulk Metallic Glasses: Golden Kumar1; Dale Conner2; Jan Schroers1; 1Yale University; 2California State University

9:10 AM InvitedAnelastic Deformation of a Metallic Glass: Michael Atzmon1; Jong Doo Ju1; Dongchan Jang2; 1University of Michigan; 2Caltech

9:30 AMIn situ X-Ray Diffraction Investigations of Cu-Zr Bulk Metallic Glasses under Applied Stress: Norbert Mattern1; Jozef Bednarcik2; Gang Wang1; Juergen Eckert1; 1IFW Dresden; 2DESY Hamburg

9:40 AM InvitedStructure – Property Relationship in Bulk Metallic Glasses: Evan Ma1; 1Johns Hopkins University

10:00 AM Break

10:10 AM InvitedDefects and Plastic-Deformation Modes of Bulk-Metallic Glasses: Yuri Petrusenko1; Alexander Bakai1; Ivan Neklyudov1; Igor Mikhailovskij1; Sergij Bakai1; Peter K. Liaw2; Lu Huang; Tao Zhang3; 1National Science Center - Kharkov Institute of Physics and Technology; 2Department of Materials Science and Engineering, The University of Tennessee; 3Department of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics

10:30 AM InvitedStructural Features of BMG under Mechanical Deformation: Wojciech Dmowski1; Andrew Chuang1; Peter Liaw1; Yang Ren1; Jon Almer1; Takeshi Egami1; 1University of Tennessee

10:50 AM(Fe,Co)-Based BMGs with Small Cu Additions: Mihai Stoica1; Ran Li1; Stefan Roth1; Jürgen Eckert1; Gavin Vaughan2; Alain Yavari3; 1IFW Dresden; 2ESRF Grenoble; 3INP Grenoble

11:00 AM InvitedIrreversible Structural Changes with Cyclic Loading in Zr Based Amorphous Alloys: Despina Louca1; Peng Tong1; Gongyao Wang2; Peter Liaw2; Yoshihiko Yokoyama3; 1University of Virginia; 2University of Tennessee; 3Tohoku University

11:20 AMEffect of Plastic Deformation History on the Subsequent Mechanical Behavior of a Bulk-Metallic Glass: A High-Energy Synchrotron X-Ray Scattering Study: Feng Jiang1; Dongchun Qiao1; Yang Ren2; Wojtek Dmowski1; Gongyao Wang1; Yangdong Wang3; Takeshi Egami1; Peter Liaw1; Hahn Choo1; 1University of Tennessee; 2Argonne National Laboratory; 3Northeastern University

11:30 AM InvitedAtomic-Scale Mechanisms of Tension-Compression Asymmetry in a Metallic Glass: Lianyi Chen1; B. Z. Li1; X. D. Wang1; Feng Jiang2; H. Franz3; Ren Yang4; Peter Liaw2; Jianzhong Jiang1; 1Zhejiang University; 2University of Tennessee; 3HASYLAB at DESY; 4Argonne National Laboratory

11:50 AMThermomechanical Behavior of Cu50Hf41.5Al8.5 Bulk Metallic Glass Following Cyclic and Static Elastic Compression in Different Loading Directions: Arif Mubarok1; Rainer Hebert1; 1University of Connecticut

12:00 PMStatic and Dynamic Observation of Shear Bands in Metallic Glasses: Eun Soo Park1; Frans Spaepen2; 1Seoul National University; 2Harvard University

12:10 PMEffect of Stress State on Flow at Bulk Metallic Glass Interfaces: Nicholas Hutchinson1; Dan Campbell1; Katharine Flores1; 1The Ohio State University

Characterization of Minerals, Metals and Materials: Characterization of Iron and Steel ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Jiann-Yang Hwang, Michigan Technological University; Donato Firrao, Politecnico di Torino


8:35 AMNano-Scale Characterization of Carbon Partitioning from Supersaturated Plates of Ferrite: Francisca Caballero1; Mike Miller2; Carlos Garcia-Mateo1; 1CENIM-CSIC; 2ORNL

8:55 AMNondestructive Characterization of Microstructure and Properties of Steel Products: Jagdish Pandey1; Manish Raj1; Nikhiles Bandyopadhyay1; 1Tata Steel Ltd.

9:15 AMRole of Microstructure and Composition in Resisting Hydrogen Embrittlement of Fastener Grade Steels: Nicholas Nanninga1; Lloyd Heldt2; Karl Rundman2; 1NIST; 2Michigan Technological University

9:35 AM2D Imaging of Nano-Hardness and Phase Characterization in Steel by Noncontact Optical Photodeflection Microscopy: Nelida Mingolo1; Oscar Martínez1; Ulises Crossa Archiopoli2; 1Universidad de Buenos Aires; 2Tolket SRL

9:55 AMCharacterization of AISI 4340 Steel Formed by Direct Metal Deposition Process: Jyotirmoy Mazumder1; Sudip Bhattacharyya1; 1University of Michigan

10:15 AMClassification and Rating of Inclusions in a High Carbon Steel: M. Faraji1; R. Thackray1; I. Todd1; P. Tsakiropoulos1; 1The University of Sheffield

10:35 AMInspecting and Analyzing Microstructural Homogeneity in Grey Cast Iron: M. David Hanna1; 1General Motors R&D Center

10:55 AMAn Approach for Graphite Nodules Detection in Ductile Cast Iron: Ali-Reza Kiani-Rashid1; S.A. Rounaghi1; 1Ferdowsi University of Mashhad

19

Technical Program

Mo

n. A

M

11:15 AMAs-Cast Microstructures of Aluminum Containing Ductile Cast Irons: Ali-Reza Kiani-Rashid1; A Shayesteh-Zeraati2; H. Naser-Zoshki3; M.R. Yousef-Sani1; 1Ferdowsi University of Mashhad; 2Sharif University of Technology; 3Iran University of Science and Technology

11:35 AM Concluding Comments

11:40 AM Question and Answer Period

Coatings for Structural, Biological, and Electronic Applications: Processing Techniques and CharacterizationSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS: Thin Films and Interfaces CommitteeProgram Organizers: Nuggehalli Ravindra, New Jersey Institute of Technology; Gregory Krumdick, Argonne National Laboratory; Roger Narayan, Univ of North Carolina & North Carolina State Univ; Choong-un Kim, University of Texas at Arlington; Nancy Michael, University of Texas at Arlington


Session Chair: Gregory Krumdick, Argonne National Labs


8:35 AM InvitedMorphological Evolution during the Annealing and Growth of Polycrystalline Films: Ramanathan Krishnamurthy1; Mikko Haataja2; 1Purdue University; 2Princeton University

9:05 AMSynthesis of Amorphous Al-Co-Ce Alloys via Atomization and Mechanical Milling: Zhihui Zhang1; Ying Li1; Yizhang Zhou1; Enrique Lavernia1; 1University of California Davis

9:25 AM InvitedMicrostructure and Mechanical Properties of Vanadium Oxide-Based Coatings on Steel Substrates Prepared by Pulsed Laser Deposition: Andreas Jahja1; Paul Munroe2; 1Materials Science and Engineering; 2Materials Science and Engineering, University of New South Wales

9:55 AM Break

10:10 AM InvitedMethod of Characterizing Pore Structure in Porous Coating Layer Using a Simple Voltammetry: Nancy Michael1; Woong-Ho Bang1; Choong-Un Kim1; 1University of Texas at Arlington

10:40 AMThe Effect of Aging Time on the Properties of Sol-Gel Derived Nanostructure Fluorapatite Powder and Coating: Ehsan Mohammadi Zahrani1; M. H. Fathi2; Akram Alfantazi1; 1The University of British Columbia; 2Isfahan University of Technology

11:00 AM InvitedMicrostructure and Mechanical Properties of Yttria-stablized Zirconia Coatings Produced By Electrophoretic Deposition and Microwave Sintering: Wei Wang1; Shiqiang Qian1; 1Shanghai University of Science Engineering

11:30 AM InvitedCarrier Concentration Tuning and Enhanced Photoelectrochemical Response of Bandgap-Reduced Cu and Ga Co-Doped P-Type ZnO Films: Sudhakar Shet1; Kwang-Soon Ahn2; Heli Wang1; Todd Deutsch1; Nuggehalli Ravindra3; Yanfa Yan1; John Turner1; Mowafak Al-Jassim1; 1National Renewable Energy Laboratory; 2Yeungnam University; 3New Jersey Institute of Technology

12:00 PMResearch on Nano Fe2O3 Film Coated on Surface of 3D-Meshwork SiC by Sol-Gel Method: Yu Liang1; Wu Yanjun1; Ru Hongqiang1; Yue Xinyan1; Li Jingyang1; 1Texture of Materials, Ministry of Education, College of Materials and Metallurgy, Northeastern University,

Computational Thermodynamics and Kinetics: Diffusion and DefectsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign


Session Chair: To Be Announced

8:30 AM InvitedControlling Diffusion in Semiconductor Nanostructures by Size and Dimensionality: James Chelikowsky1; 1University of Texas

9:00 AM InvitedCompositional Point Defect Evaluation Using Diffusion Multiples: Ji-Cheng Zhao1; Xuan Zheng2; David Cahill2; 1The Ohio State University; 2University of Illinois at Urbana-Champaign

9:30 AM InvitedDiffusion in Alloys and Intercalation Compounds from First Principles: Anton Van der Ven1; 1University of Michigan

10:00 AMAb Initio Modeling of Interstitial Diffusion in bcc Fe: Marcel Sluiter1; 1TU Delft

10:20 AM Break

10:30 AM InvitedFirst-principles Approach to Transition States of Diffusion: Zi-Kui Liu1; 1The Pennsylvania State University

11:00 AMQuantifying the Strength of Point Defect Based Hydrogen Traps in bcc and fcc Iron: William Counts1; Chris Wolverton1; Ron Gibala2; 1Northwestern University; 2University of Michigan

11:20 AMIsland Shape Controls Magic Size Effect for Heteroepitaxial Diffusion: Henry Wu1; Dallas Trinkle1; 1University of Illinois at Urbana-Champaign

11:40 AMEffects of Spin Transition on Diffusion of Fe2+ in Ferropericlase in Earth’s Lower Mantle: Saumitra Saha1; Dane Morgan1; Amy Bengtson2; 1University of Wisconsin-Madison; 2University of Michigan

12:00 PMMolecular Dynamics Simulation of Self-Diffusion in bcc Metals: Mikhail Mendelev1; 1Ames Laboratory


20

Technical Program

Mo

n. A

M

Cost-Affordable Titanium III: Overview and Low Cost ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: Henry Rack, Clemson University; James Sears, Quad City Manufacturing Laboratory

8:30 AMCost Affordable Developments in Titanium Technology and Applications: F. H. (Sam) Froes1; M. Ashraf Imam2; 1Institute for Materials and Advanced Processes; 2Naval Research Lab

8:55 AMThe FFC-Cambridge Process for Titanium Metal Winning: Carsten Schwandt1; Derek Fray1; Gregory Doughty1; 1University of Cambridge

9:20 AMDirect Electrochemical Reduction of Titanium Dioxide in Molten Salts: Kevin Dring1; 1Norsk Titanium

9:45 AMThe Production of Ti Alloy Powder from Chloride Precursors: James Withers1; J. Laughlin1; Y. Elkadi1; J. DeSilva1; R. Loutfy1; 1MER Corporation

10:10 AM Break

10:25 AMQuantitative X-Ray Synchrotron Analysis of the FFC Cambridge Process: Rohit Bhagat1; David Dye2; Ben Jackson2; Seema Raghunathan2; Douglas Inman2; Richard Dashwood1; 1The University of Warwick; 2Imperial College London

10:50 AMNew Methods for Low-Cost Titanium Production: Ana Maria Martinez1; Karen Osen1; Egil Skybakmoen1; Ole Kjos2; Geir Martin Haarberg2; Kevin Dring3; 1SINTEF; 2NTNU; 3Norsk Titanium AS

11:15 AMA Continuous Process to Produce Titanium Utilizing Metallothermic Chemistry: James Withers1; J. Laughlin1; Y. Elkadi1; J. DeSilva1; R. Loutfy1; 1MER Corporation

11:40 AMThe Electrolytic Production of Ti from a TiO2 Feed (The DARPA Sponsored Program): James Withers1; J. Laughlin1; Y. Elkadi1; J. DeSilva1; R. Loutfy1; 1MER Corporation

12:05 PMThe FFC Cambridge Process for Production of Low Cost Titanium and Titanium Powders: Mark Bertolini1; Lee Shaw1; Lucy England1; Kartik Rao1; James Dean1; James Collins1; 1Metalysis

Failure of Small-Scale Structures: Nanowire BehaviorSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Marian Kennedy, Clemson Univeristy; Brad Boyce, Sandia National Laboratory; Reinhold Dauskardt, Stanford; Zhiwei Shan, Hysitron Inc


Session Chairs: Brad Boyce, Sandia National Laboratories; Molly Kennedy, Clemson University

8:30 AM InvitedInsights from Nanomechanical Testing: Nanoengineering Surfaces, Thin Films, and Nanowires: Christopher Muhlstein1; 1The Pennsylvania State University

8:55 AM InvitedMechanical Behavior of Au Nanowires: Cynthia Volkert1; B. Roos1; B. Kapelle1; G. Richter2; A. Sedlmayr3; D.S. Gianola4; R. Mönig3; 1Institute for Materials Physics, University of Göttingen; 2Max Planck Institute for Metals Research; 3Institute for Materials Research-II, Forschungszentrum Karlsruhe; 4Formally at the Institute for Materials Research-II, Forschungszentrum Karlsruhe, currently at the Department of Materials Science and Engineering, University of Pennsylvania

9:20 AMIn-Situ Tensile Deformation of Silver Nanowires: Junhang Luo1; Jian Yu Huang2; Catherine Murphy3; Scott Mao1; 1University of Pittsburgh; 2Sandia National Laboratories; 3University of South Carolina

9:35 AMIn-Situ TEM Studies of Nanomechanics and Fracture in Nanowires and Nanotubes: Reza Shahbazian-Yassar1; Hessam Ghasemi1; Anahita Pakzad1; Kasra Momeni1; Anjana Ashtana1; Yoke Yap1; 1Michigan Technological University

9:50 AM Break

10:05 AM InvitedFracture and Deformation in Metallic Nanowires: Scott Mao1; A. Cao2; Y. Wei2; 1University of Pittsburgh; 2Institute of Mechanics

10:30 AM InvitedIn-Situ Atomic Scale Nanomechanics Revealed by a TEM-SPM Platform: Jianyu Huang1; Junhang Luo2; He Zheng2; Scott Mao2; Nan Li3; Jian Wang3; Xinghang Zhang4; Armit Misra3; Yang Lu5; Jun Lou5; Erik Bitzek6; Ju Li6; 1Sandia National Laboratories; 2University of Pittsburgh; 3Los Alamos National Laboratories; 4Texas A&M University; 5Rice University; 6University of Pennsylvania

10:55 AMAn In Situ Scanning Electron Microscopy Study of Size Dependent Mechanical Behaviors of Metallic Nanowires: Cheng Peng1; Yang Lu1; Yogi Ganesan1; Yongjie Zhan1; Jun Lou1; 1Rice University

11:10 AM InvitedDeformation Mechanisms in Quasi-1D Nanostructures: In Situ Observations and Measurements during Tensile Testing in Electron Microscopes: Daniel Gianola1; 1University of Pennsylvania

11:35 AM InvitedStatistical Effects on Material Strength at Small Length Scales: Shyam Keralavarma1; Ahmed Benzerga1; 1Texas A&M University

21

Technical Program

Mo

n. A

M

General Abstracts: Materials Processing and Manufacturing Division: WeldingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Global Innovations Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Phase Transformations Committee, TMS: Powder Materials Committee, TMS: Process Technology and Modeling Committee, TMS: Shaping and Forming Committee, TMS: Solidification Committee, TMS: Surface Engineering CommitteeProgram Organizers: Thomas Bieler, Michigan State University; Corbett Battaile, Sandia National Laboratories



8:30 AMHigh Brightness Nd:YAG Laser Welding of Aluminum 5754: Jyotirmoy Mazumder1; Leslie Pipe1; Yi Liu1; David Roessler1; 1University of Michigan

8:50 AMRobotic Welding of Large Floor Panels Made of Light Aluminum Extrusions: Michel Guillot1; 1Laval University

9:10 AMEffects of Novel Processing Techniques on the Fatigue Crack Growth Behavior of 6061 Alloys: Brendan Chenelle1; Christopher Lammi1; Diana Lados1; 1Worcester Polytechnic Institute

9:30 AMNumerical and Experimental Analyses for Effect of Welding Speeds on Cooling Rates in Manual Metal Arc Welding(MMAW): Muna Abbass1; Jalal M. Jalil1; Abbas Sh. Alwan1; 1University of Technology, Baghdad

9:50 AMThe Effect of Welding Speed on the Crystallographic Texture Observed in Friction Stir Welding of Near-Alpha Titanium: Richard Fonda1; Keith Knipling1; 1Naval Research Laboratory

10:10 AM Break

10:30 AMSpot Welding of Automotive Steels and Light Metals by Friction Bit Joining: Michael Miles1; K. Kohkonen1; Zhili Feng2; 1BYU; 2Oak Ridge National Lab

10:50 AMUltrasonic Welding a Novel Approach to Friction Spot Welding Dissimilar Aluminum to Steel Automotive Sheets: Farid Haddadi1; Philip Prangnell1; Dimitrios Bakavos1; 1The University of Manchester

11:10 AMComputational Welding Mechanics: Hardening Models in Welding Simulation: Amir Masoud Akbari Pazooki1; 1TU Delft

11:30 AMThermo-Mechanical-Metallurgical Simulation of DP600 Steel during Welding: Amir Masoud Akbari Pazooki1; 1TU Delft

11:50 AMCorrelation between Shoulder Flow Zone Quality and Material Flow Quantity during Friction Stir Welding of Thick Aluminum Section Using Scroll Shoulder Tool: David Yan1; Zhan Chen1; Guy Littlefair1; 1AUT University

12:10 PMDistortion Assessment of a Direct Cast Uranium - 6 wt. % Niobium Cylinder: Hunter Swenson1; Rob Aikin1; 1Los Alamos National Laboratory

General Abstracts: Structural Materials Division: Materials Characterization and Shock LoadingSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Composite Materials Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Mechanical Behavior of Materials Committee, TMS/ASM: Nuclear Materials Committee, TMS: Refractory Metals Committee, TMS: Titanium CommitteeProgram Organizers: Eric Ott, GE Aviation; Robert Hanrahan, National Nuclear Security Administration; Judith Schneider, Mississippi State University



8:30 AMCharacteristics of High Interstitially Alloyed 18Cr-10Mn Stainless Steels: Chang-Seok Oh1; Tae-Ho Lee1; Heon-Young Ha1; Sung-Joon Kim1; 1Korea Institute of Materials Science

8:50 AMResearch on the Thermal Plasticity of the 18Mn-18Cr-0.77N-2Mo High Nitrogen Austenitic Stainless Steel: Li Wanming1; Li huabing1; Jiang Zhouhua1; 1Northeastern University

9:10 AMAn Overview of the Microstructures of High-Strength Two-Phase near-Equi-Atomic FeNiMnAl Alloys: I. Baker1; Y. Liao1; X. Wu1; H. Wu1; M.K. Miller2; K.F. Russell2; P.R. Munroe3; 1Dartmouth College; 2Oak Ridge National Laboratory; 3University of New South Wales

9:30 AMQuantitative Measurement of Crack Initiation and Propagation in High Explosives and Mocks: Carl Cady1; Cheng Liu1; Philip Rae1; Manuel Lovato1; 1Los Alamos National Laboratory

9:50 AMWas There a Bomb on Mattei’s Aircraft?: Donato Firrao1; Graziano Ubertalli1; 1Politecnico di Torino

10:10 AM Break

10:20 AMThe Response of Aluminium Alloys to Shock Loading: Jeremy Millett1; Neil Bourne1; Ming Chu2; Ian Jones2; George Gray III3; Gareth Appleby-Thomas4; 1AWE; 2University of Birmingham; 3Los Alamos National Laboratory; 4Cranfield University

10:40 AMDeformation Behavior of U-6wt%Nb Following Shock Loading: Adam Farrow1; Heather Volz1; George Gray III1; Ellen Cerreta1; Donald Brown1; Carl Cady1; Mike Lopez1; Ann Kelly1; Pallas Papin1; 1Los Alamos National Laboratory

11:00 AMMechanical and Computational Investigation of Ni-Al Laminates of Laser-Shock Compression and Spalling: Chung-Ting Wei1; Vitali Efrem1; David Benson1; Brian Maddox1; Timothy Weihs1; Adam Stover1; Marc Meyers1; 1University of California, San Diego

11:20 AMImprovement of Charpy Impact Properties in Heat Affected Zones of API X80 Linepipe Steels Containing Complex Oxides: Hyo Kyung Sung1; Sang Yong Shin1; Woo-Yeol Cha2; Kyungshik Oh2; Sunghak Lee1; 1POSTECH; 2POSCO


22

Technical Program

Mo

n. A

M

11:40 AMMicrostructural Analysis of Separations Occurring during Charpy Impact Test of Linepipe Steels: Seokmin Hong1; Sang Yong Shin1; Jin-ho Bae2; Kisoo Kim2; Sunghak Lee1; Nack J. KIM3; 1POSTECH; 2POSCO; 3POSTECH GIFT

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Perspectives from Government and IndustrySponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Deb Whitis, GE Aviation; Rollie Dutton, AFRL-RX

8:30 AM InvitedFuture Materials and Process Needs for Commercial Jet Transports: The 21st Century Challenge: Alan Miller1; 1Boeing

9:00 AM InvitedRealizing Advances in Aerospace Materials: ONR Perspective: Julie Christodoulou1; 1Office of Naval Research

9:30 AM InvitedModeling in Aerospace Materials and Manufacturing in AFRL: Mary Kinsella1; Howard W. Sizek1; 1United States Air Force, Air Force Research Laboratory

10:00 AM Break

10:20 AM InvitedInnovations in Aerospace Materials and Manufacturing Process Development: Robert Schafrik1; 1GE Aviation

10:50 AM InvitedGlobal Innovations in Manufacturing Aerospace Materials: A Rolls-Royce Perspective: Malcolm Thomas1; 1Rolls-Royce

11:20 AM InvitedThe DARPA/DSO Perspective on Materials Science: Leontios Christodoulou1; 1Defense Advanced Research Agency

Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids: Simulation ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Rainer Schmid-Fetzer, Clausthal University of Technology; Heike Emmerich, RWTH Aachen University; Frans Spaepen, Harvard University; Martin Glicksman, University of Florida; John Perepezko, University of Wisconsin, Madison


Session Chairs: Yunzhi Wang, Ohio State University; Frans Spaepen, Harvard School of Engineering and Applied Sciences

8:30 AM InvitedMolecular Dynamics Simulation of Two-Dimensional Nucleation in the Context of Crystal Growth: Dorel Buta1; Mark Asta1; Jeff Hoyt2; 1University of California, Davis; 2McMaster University

8:55 AMMolecular Dynamics Simulation of Nucleation Process: Ramanarayan Hariharaputran1; David Wu1; 1Institute of High Performance Computing, Singapore

9:15 AMPrefreezing and Heterogeneous Nucleation at the Cu/Pb Solid-Liquid Interface: A Molecular-Dynamics Simulation Study: Jesus-Pablo Palafox-Hernandez1; Mark Asta2; Brian Laird1; 1University of Kansas; 2University of California at Davis

9:35 AMComputer Simulation of Solid-Liquid Interfaces in Metals: Roberto E. Rozas1; Juergen Horbach1; 1German Aerospace Center

9:55 AMDissolutive and Reactive Wetting: James Warren1; Daniel Wheeler1; William Boettinger1; 1NIST

10:15 AM Break

10:35 AM InvitedEntropy in Crystal Nucleation of Hard Spheres: Eli Sloutskin1; Peter Lu1; David Weitz1; 1Harvard University

11:00 AMAnalysis of Cluster Statistics in Homogeneous and Heterogeneous Nucleation: David Wu1; Ramanarayan Hariharaputran1; 1Institute of High Performance Computing

11:20 AMPhase Behavior and Microstructure of Binary Colloidal Mixtures: Nina Lorenz1; Hans-Joachim Schöpe1; Holger Reiber1; Thomas Palberg1; Patrick Wette2; Ina Klassen2; Dirk Holland-Moritz2; Dieter Herlach2; Tsuneo Okubo3; 1University of Mainz; 2German Aerospace Center; 3Institute for Colloidal Organization

11:40 AMWall-Induced Structures in Heterogeneous Nucleation: Fathollah Varnik1; Markus Gross1; Suvendu Mandal1; 1ICAMS, Ruhr University Bochum

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



8:30 AM PlenaryWilliam Hume-Rothery Award Winner: How Hume-Rothery’s Work Led to Computational Thermodynamics: Didier De Fontaine1; 1University of California

9:15 AM InvitedDeconstructing the Cluster Expansion: Juan Sanchez1; Alejandro Diaz-Ortiz2; 1University of Texas at Austin; 2Max Planck Institute for Metals Research

9:45 AM InvitedThe Existence of a Multi-Phase Critical Point in Metastable fcc Ordering Phase Diagrams and Its Influence on Phase Diagram Features, Interfacial Energies and Alloy Properties: John Cahn1; 1University of Washington

10:15 AM Break

10:45 AM Invited

23

Technical Program

Mo

n. A

M

What’s New in Cluster Expansion?: Gus Hart1; Rodney Forcade1; Tobias Kerscher2; Richard Taylor1; Lance Nelson1; Alejandro Diaz-Ortiz3; 1Brigham Young University; 2University of Erlangen; 3Max-Planck Institute for Metals

11:15 AM InvitedCluster Expansions from Bond-Order Potentials: Ralf Drautz1; David Pettifor2; 1Ruhr-Universität Bochum; 2University of Oxford

11:45 AM InvitedApplication of Continuous Displacement Cluster Variation Method to Phase Equilibria Calculations: Tetsuo Mohri1; 1Hokkaido University

Hydrometallurgy - General Session: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Aqueous Processing CommitteeProgram Organizer: Michael Free, University of Utah


Session Chair: Michael Free, University of Utah

8:30 AMHighly Selective Oxygen Evolution Anodes for Electrowinning of Metal: Masatsugu Morimitsu1; Kana Uno1; Naoyuki Oshiumi1; 1Doshisha University

8:50 AMCharacteristics of Cathodic Reduction of Oxygen on Gold Electrode: Yong-bin Yang1; Tao Jiang1; Qian Li1; Yu-feng Guo1; 1CSU

9:10 AMDissolution of Precious Metal Alloys Containing Zinc in Acid Solution: Hideaki Sasaki1; Takashi Nagai1; Masafumi Maeda1; 1Institute of Industrial Science, The University of Tokyo

9:30 AMExtraction of Copper from Sulfate Leach Solution Containing Minor Metallic Constituents in Mixer Settler Unit: Vinay Kumar1; Manis Kumar Jha1; Manoj Kumar1; Jinki Jeong2; Jae-chun Lee2; 1National Metallurgical Laboratory; 2Korea Institute of Geosciences and Mineral Resources (KIGAM)

9:50 AMGold and Silver Recovery by Electrocoagulation: Jose Parga1; Jesus L. Valenzuela2; 1Technology Institute of Saltillo; 2University of Sonora

10:10 AM Break

10:20 AMPressure Leaching of Enargite-Pyrite Concentrates: Maria Ruiz1; Maria Vera1; Rafael Padilla1; 1University of Concepcion

10:40 AMThe Rate-Enhancing Role Provided to Oxygen by Nitrite (N[III]) in Acidic Aqueous Oxidation-Processes: Gerard Martins1; O. Solak-Gok1; 1Colorado School of Mines

11:00 AMHalide Chlorine Leaching for Malachite and Chrysocolla Mineral Copper from Western Utah Copper Concentrate Company: Edgar Blanco1; Mark Dotson1; 1Western Utah Copper Company

International Symposium on High-Temperature Metallurgical Processing: Innovations in IronmakingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Pyrometallurgy CommitteeProgram Organizers: Jaroslaw Drelich, Michigan Technological University; Jiann-Yang Hwang, Michigan Technological University; Tao Jiang, Central South University; Jerome Downey, Montana Tech


Session Chair: Jaroslaw Drelich, Michigan Technological University


8:35 AM KeynoteDevelopment of a Novel Gas-Suspension Ironmaking Technology with Greatly Reduced Energy Consumption and CO2 Emission: Hong Yong Sohn1; Moo Eob Choi1; 1University of Utah

9:15 AMThermal Equilibrium Calculation and Application of Microwave Heated Ignition (MHI) for Iron Ore Sintering: Yuanbo Zhang1; Xiaoming Mao1; Zhucheng Huang1; Guanghui Li1; Tao Jiang1; 1Central South University

9:35 AMCoal-Based Direct Reduction of Iron Concentrate Pellets by Microwave Heating: Wang Xia1; Huang Zhucheng1; 1Central South University

9:55 AMEffects of Composite Binder (CB) on Oxidation Behavior of Iron Ore Pellets: Tao Jiang1; Youming Hu1; Yanfang Huang1; Guanghui Li1; Guihong Han1; Yuanbo Zhang1; 1School of Minerals Processing and Bioengineering, Central South University

10:15 AMStudy on Direct Reduction-Separation of Limonite by Microwave Heating: Zhu-cheng Huang1; Lili Lv1; 1Central South University

10:35 AM Break

10:50 AMPreparation of Metallized Pellets and Recovery of Tin and Zinc from Tin, Zinc-Bearing Complex Iron Concentrates: Dan Huang1; Yuanbo Zhang1; Guihong Han1; Guanghui Li1; Tao Jiang1; 1School of Minerals Processing and Bioengineering, Central South University

11:10 AMResearches on Magnetic Roasting-Separation of Coal-Containing Limonite Pellets by Microwave Heating: Hu Bing1; Huang Zhucheng1; 1Central South University

11:30 AMMathematical Modeling for Side-Blow Combustion Region in Iron Bath Reactor with H2-C Mixture Reduction: Zhang Bo1; Hong Xin1; 1Shanghai University

11:50 AMAl-Fe Separation from High Aluminium Content Limonite Ores by Salt-Added Reduction Roasting Process: Tao Jiang1; Mudan Liu1; Na Sun1; Guanghui Li1; 1School of Minerals Processing and Bioengineering, Central South University

12:10 PMA Study on Beneficiation of Low Grade High-Phosphorus Iron Ore: Zhu Deqing1; Chun Tiejun1; Pan Jian1; Wei Xuemei1; 1Central South University


24

Technical Program

Mo

n. A

M

Jim Evans Honorary Symposium: Flow Phenomena in Steel Continuous CastingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Brian Thomas, University of Illinois at Urbana-Champaign

8:30 AMJim Evans: A Reflection on his Impact: Fiona Doyle1; 1University of California, Berkeley

8:55 AMLiquid Metal Modelling of Continuous Steel Casting: Gunter Gerbeth1; Sven Eckert1; Klaus Timmel1; Xincheng Miao1; 1Forschungszentrum Dresden-Rossendorf

9:20 AMExperimental and Numerical Simulation of the Mold Region of a Steel Continuous Caster: Koulis Pericleous1; Zacharias Kountouriotis1; Georgi Djambazov1; Francois Domgin2; Pascal Gardin2; 1University of Greenwich; 2ArcelorMittal

9:45 AMEffect of Stopper-Rod Misalignment on Asymmetric Flow and Vortex Formation in Steel Slab Casting: Seong-Mook Cho1; Go-Gi Lee2; Seon-Hyo Kim1; Rajneesh Chaudhary3; Oh-Duck Kwon4; Brian G Thomas3; 1Pohang University of Science and Technology; 2Research Institute of Industrial Science and Technology; 3University of Illinois at Urbana-Champaign; 4POSCO

10:10 AM Break

10:30 AMSlag Infiltration and Initial Solidification Mechanisms during Continuous Casting: Pavel Ramirez Lopez1; Peter Lee1; Kenneth Mills1; 1Imperial College London

10:55 AMControl of Fluid Flow, Heat Transfer and Inclusions in Continuous Casting: CFD and Neural Network Studies: Petri Väyrynen1; Shenqiang Wang1; Jukka Laine1; Seppo Louhenkilpi1; 1Helsinki University of Technology

11:20 AMTurbulent Instabilities in a Thin Slab Mold: Rodolfo Morales1; Saul Hernandez-Garcia1; 1IPN

11:45 AMNumerical Investigation of the Flow and Steel/Slag Interface Behaviors in Slab Continuous Casting Mold with Electromagnetic Brake and Argon Gas Injection: Miaoyong Zhu1; Haiqi Yu1; 1Northeastern University

Magnesium Technology 2010: Plenary SessionSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Sean Agnew, University of Virginia; Wim Sillekens, TNO Science and Industry


8:35 AMMagnesium Alloys in Aerospace Applications - Flammability Testing and Results: Bruce Gwynne1; 1Magnesium Elektron

9:00 AM KeynoteA Possible Route to Making Magnesium Fit for Hydrogen Storage in Automotive Applications: Vladimir Skripnyuk1; Eugene Rabkin1; Yuri Estrin2; Rimma Lapovok2; 1Technion; 2Monash University

9:30 AM KeynotePrecipitation Strengthening in Magnesium Alloys Containing Rare Earth Elements: Xiaoqin Zeng1; Wenjiang Ding1; Yujuan Wu1; Liming Peng1; Alan Luo2; 1National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiao Tong University; 2Materials and Processes Laboratory, General Motors Research and Development Center

10:00 AM KeynoteThermodynamics and Constitution of Mg-Zn-Ce Alloys: Chen-nan Chiu1; Artem Kozlov2; Joachim Groebner2; Rainer Schmid-Fetzer2; 1National Tsing Hua University; 2Clausthal University of Technology

10:30 AM Break

10:50 AM KeynoteModeling Temperature and Strain Rate Dependent Inelastic Deformation and Recrystallization in Mg Alloys: Douglas Bammann1; Esteban Marin1; Kiran Solanki1; 1Mississippi State University

11:20 AMMagnesium Alloys in Army Applications: Past, Current and Future Solutions: Suveen Mathaudhu1; Eric Nyberg2; 1U.S. Army Research Laboratory; 2Pacific Northwest National Laboratory

11:45 AMMagForming - Development of New Magnesium Forming Technologies for the Aeronautics Industry: Bruce Davis1; Amir Fein2; Wolfgang Entelmann3; Elke Hombergsmeier4; 1Magnesium Elektron North America; 2Palbam-AMTS; 3Airbus-Deutschland; 4EADS Deutschland GmbH

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: Materials for Clean Coal Power and CCS Systems ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab ; K. Weil, Pacific Northwest National Lab ; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chair: Xingbo Liu, West Virginia University

8:30 AM KeynoteDevelopment and Implementation of Materials to Enable Clean Coal Technologies: Cynthia Powell1; 1Office of Research and Development, National Energy Technology Laboratory, US Department of Energy

9:10 AM InvitedAgeing and Corrosion in CO2 Rich Flue Gases and Their Influence on the Creep and Fatigue Properties of Superheater Materials: Axel Kranzmann1; Jürgen Olbricht1; Daniela Hünert1; Diana Marcano1; Wencke Schulz1; Werner Österle1; Romeo Saliwan-Neumann1; Hellmut Klingelhöffer1; Gabriele Oder1; Ingrid Urban1; Birgit Skrotzki1; 1Federal Institute for Materials Research and Testing

25

Technical Program

Mo

n. A

M

9:50 AMDesigning Amine-Based CO2 Sorbents - A Computational and Experimental Study: John Kitchin1; 1Carnegie Mellon University

10:10 AM Break

10:40 AM InvitedDeployment of New High Temperature Alloys for Power Generation Systems: Bruce Pint1; 1Oak Ridge National Laboratory

11:20 AMDensity Functional Theory Study of Grain Boundary Properties in Ni-Base Superalloys: Kuiying Chen1; Wei-Di Cao; 1ATI Allvac

11:40 AMMaterials Selection for Steam Turbine Components in Advanced Ultra Supercritical Power Plants: Jeffrey Hawk1; 1U.S. Department of Energy

Materials Processing Fundamentals: Solidification and CastingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Process Technology and Modeling CommitteeProgram Organizer: Prince Anyalebechi, Grand Valley State University


Session Chair: Prince Anyalebechi, Grand Valley State University

8:30 AMFe-Mn-Al-C Austenitic Steels Treated by Ca and Ce: Simon Lekakh1; Von Richards1; Angella Schulte; David Van Aken1; 1MST

8:50 AMStrong Magnetic Field Induced Phase Alignment during Solidification: Zhi Sun1; Muxing Guo1; Jef Vleugels1; Omer Van der Biest1; Bart Blanpain1; 1Katholieke Universiteit Leuven

9:10 AMExperimental Analysis of Thermal, Tensile and Microhardness Properties in Directional Solidified ZA, Zn-Ag and ZINAG Alloys: Alicia Ares1; Sergio Gueijman2; Carlos Schvezov1; 1CONICET/FCEQyN-UNaM; 2FCEQyN-UNaM

9:30 AMEffects of Solidification Rate and Alloy Composition on the Cast Microstructure of Aluminum Alloy 5182: Prince Anyalebechi1; 1Grand Valley State University

9:50 AM Break

10:10 AMElaboration and Nanoscale Characterization of a Fe-Y2O3 Nanocomposite Prepared by Reactive Ball-Milling and Annealing: Mathilde Brocq1; Fabrice Legendre1; Bertrand Radiguet2; Mathieu Couvrat1; Fabien Cuvilly2; Philippe Pareige2; Jean-Marie Lebreton2; 1SRMP - CEA; 2GPM-Université de Rouen

10:30 AMThe Effect of Boron Addition on the Wear Resistance of High Chromium White Cast Iron: Cenk Saglam1; Selim Ozavar2; Onuralp Yucel1; 1Istanbul Technical University; 2UMIT Casting

10:50 AMNovel Current Activated Tip-Based Sintering (CATS) of Advanced Materials: K. Morsi1; K. Moon1; S. Kassegne1; R. Ugle1; M. Patel1; 1San Diego State University

11:10 AMComparison of Microstructural Evolution of Nickel during Conventional and Spark Plasma Sintering: Matthew Luke1; Darryl Butt1; Megan Frary1; 1Boise State University

11:30 AMSecondary Cooling Technology for Casting of Hypo-Peritectic Steels: Jian Zhang1; Chen Dengfu1; Long Mujun1; Wang Shuigen1; Bi Yanyan1; 1Chongqing University

11:50 AMInvestigation of a “Swirling” Phenomenon in Tungsten Carbide-Cobalt during Laser Deposition Using In-Situ Thermal Imaging: Yuhong Xiong1; William Hofmeister2; John Smugeresky3; Jonathan Nguyen1; Jean-Pierre Delplanque1; Julie Schoenung1; 1University of California; 2University of Tennessee Space Institute; 3Sandia National Laboratories

Mechanical Performance for Current and Next-Generation Nuclear Reactors: Advances in Mechanical TestingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Dylan Morris, NIST; Greg Oberson, Nuclear Regulatory Commission; Nicholas Barbosa, National Institute of Standards & Tech; Wolfgang Hoffelner, Paul Scherrer Institute


Session Chairs: Nicholas Barbosa, National Institute of Standards and Technology; Peter Hosemann, LANL

8:30 AM InvitedSmall Specimen Test Techniques for Evaluating Properties of Irradiated Materials: Mikhail Sokolov1; 1ornl

9:00 AMMicro and Macro Scale Mechanical Testing and Characterization on Irradiated Structural Materials for Nuclear Application: Peter Hosemann1; Manuel Pouchon2; Yong Dai2; Stuart Maloy1; 1LANL; 2Paul Scherrer Institute

9:20 AMMicroscale Methods for Evaluating Mechanical Behavior of Ion Irradiated Metals at High Damage Levels: Luke Brewer1; Khalid Hattar1; Brad Boyce1; Joseph Michael1; 1Sandia National Laboratories

9:40 AM InvitedSmall Specimen and in situ Mechanical Test Methods in the US Fusion Reactor Materials Program: Roger Stoller1; G. Robert Odette2; Richard Kurtz3; Mikhail Sokolov1; Yutai Katoh1; Thak Sang Byun1; Anton Moeslang4; 1Oak Ridge National Laboratory; 2University of California; 3Pacific Northwest National Laboratory; 4FZK Karlsruhe

10:10 AM Break

10:25 AM InvitedMechanical Testing of Core Fast Reactor Materials for the Advanced Fuel Cycle Initiative: Stuart Maloy1; Tobias Romero1; Mychailo Toloczko2; Thak-sun Byun3; 1Los Alamos National Laboratory; 2PNNL; 3ORNL

10:55 AMDamage Related Information Contained in Small Material Volumes of Advanced Nuclear Plants: Wolfgang Hoffelner1; Manuel Pouchon1; Jiachao Chen1; Maria Samaras1; 1Paul Scherrer Institute

11:15 AMStudying the Effect of Carbon on DU-Mo Foil Fabrication Using Small-Scale Specimen Testing: Ramprashad Prabhakaran1; Douglas Burkes1; Amy DeMint2; Jack Gooch2; Dennis Keiser1; Daniel Wachs1; Indrajit Charit3; 1Idaho National Laboratory; 2Y-12 National Security Complex; 3University of Idaho


26

Technical Program

Mo

n. A

M

11:35 AMMechanical Properties of Fresh and Irradiated Monolithic U-Mo Fuels: Ramprashad Prabhakaran1; Douglas Burkes1; Dennis Keiser1; Daniel Wachs1; Adam Robinson1; Jan-Fong Jue1; Indrajit Charit2; 1Idaho National Laboratory; 2University of Idaho

11:55 AMStructural Modifications and Mechanical Degradation of Ion Irradiated Glassy Polymer Carbon: Malek Abunaemeh1; Mohammad Seif1; Lumin Wang2; Ibidapo Ojo1; Young Yang3; Claudiu Muntele1; Abdulla Elsamadicy4; Daryush ILA1; 1Alabama A&M University; 2University of Michigan; 3University of Wisconsin; 4University of Alabama in Huntsville

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Plasticity and Strength of Nanostructured and Nanoscale Materials ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Douglas Spearot, University of Arkansas; Stephen Foiles, Sandia National Laboratories

8:30 AM InvitedMolecular Dynamics Simulation of the Deformation of an Equilibrated Nanograined Metal: Stephen Foiles1; 1Sandia National Laboratories

9:00 AMAnalysis of Dislocation Twin-Interaction in Deformed Nanocrystalline fcc Metals: Karsten Albe1; Alexander Stukowski1; Diana Farkas2; 1TU Darmstadt; 2VirginiaTech

9:20 AMDislocation Nucleation and Starvation in Metallic Nanowires: Scott Mao1; A. Cao2; Y Wei2; 1University of Pittsburgh; 2Institute of Mechanics

9:40 AMDislocation Nucleation from Grain Boundaries in Nanocrystalline Pd and Pd-Au Studied by Molecular Dynamics Simulations: Jonathan Schaefer1; Alexander Stukowski1; Karsten Albe1; 1TU Darmstadt

10:00 AMOrientation Dependent Plasticity in Metal Nanowires under Torsion: Christopher Weinberger1; Wei Cai1; 1Stanford University

10:20 AM Break

10:40 AM InvitedSlip Transmission Mechanisms for Glide Dislocations across Dissimilar Metallic Interfaces: Jian Wang1; Richard Hoagland1; John Hirth1; Amit Misra1; 1LANL

11:10 AMMolecular Mechanics Simulation of Plastic Deformation in Nanoscale FCC-BCC Multilayered Metallic Composites: Shuai Shao1; Sergey Medyanik1; 1Washington State University

11:30 AMShock Response of Cu-Nb Nanolayer Composites: Timothy Germann1; Shengnian Luo1; Nathan Mara1; 1Los Alamos National Laboratory

11:50 AMYield Strength in Nanocrystalline Cu during High Strain Rate Deformation: Nhon Vo1; Robert Averback1; Pascal Bellon1; Alfredo Caro2; 1University of Illinois, Urbana-Champaign; 2Lawrence Livermore National Laboratory

12:10 PMA Quantized Crystal Plasticity Model for Nanocrystalline Metals:Dislocation Source Strengths and Internal Stress: Lin Li1; Myoung-Gyu Lee2; Peter Anderson1; Steven Van Petegem3; Helena Van Swygenhoven3; 1The Ohio State University; 2Korea Institute of Materials Science; 3Paul Scherrer Institute

Neutron and X-Ray Studies of Advanced Materials III: Strain and Dislocation Gradients from Microdiffraction ISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Rozaliya Barabash, ORNL; Hongbin Bei, Oak Ridge National Laboratory

8:30 AM KeynoteImaging Methods for Mapping Orientations, Plastic Strain and Stresses in Grains: Henning Poulsen1; 1Risoe DTU

9:00 AM InvitedUsing High Energy X-Ray Experiments and Crystal-Based Simulations to Understand Micromechanical Deformation Behavior of Metallic Polycrystals: Matthew Miller1; Paul Dawson1; Christos Efstathiou1; Donald Boyce1; Ulrich Lienert2; 1Cornell University; 2Advanced Photon Source

9:20 AM InvitedThree Dimensional X-Ray Scanning Micro/Nano-Diffraction Probe for High-Pressure Research: Wenjun Liu1; Ho-kwang Mao2; Wenge Yang2; Yang Ding2; Lin Wang2; Przemyslaw Dera2; Gene Ice3; Paul Zschack1; 1Argonne National Laboratory; 2Carnegie Institution of Washington; 3Oak Ridge National Laboratory

9:40 AMA Facility for µXRD, µXRF and µXAS at the Canadian Light Source: Renfei Feng1; Morgan Bradford1; Stewart McIntyre2; 1Canadian Light Source; 2University of Western Ontario

9:55 AM InvitedSize Effects in Plasticity Investigated by In Situ Laue Diffraction: Steven Van Petegem1; Helena Van Swygenhoven1; 1Paul Scherrer Institut

10:15 AM InvitedResidual Stress Effects on the Phase-Specific Strains in Directionally-Solidified Nial-Mo Composite under Thermal and Mechanical Loading: Hongbin Bei1; R Barabash2; Easo George2; Gene Ice1; 1Oak Ridge National Laboratory; 2Oak Ridge National Laboratory and University and Tennessee

10:35 AM Break

10:45 AMX-Ray Micro Beam Probing Pre-Strain Effects on Dislocation and Strain Gradients in the NiAl-Mo Composite: Rozaliya Barabash1; H Bei2; Y. Gao1; G. Ice2; E. George1; 1Oak Ridge National Laboratory and the University of Tennessee, Knoxville; 2Oak Ridge National Laboratory

11:00 AM InvitedSynchrotron X-Ray Microdiffraction for the Study of Micromechanics of Materials at Nanoscale: Nobumichi Tamura1; Martin Kunz1; Kai Chen1; 1Lawrence Berkeley National Lab.

27

Technical Program

Mo

n. A

M

11:20 AM InvitedSpatially Resolved Elastic Strains within Bulk Dislocation Cell Structures: What Next?: Lyle Levine1; Bennett Larson2; Peter Geantil3; Jon Tischler2; Michael Kassner3; Wenjun Liu4; 1National Institute of Standards and Technology; 2Oak Ridge National Laboratory; 3University of Southern California; 4Advanced Photon Source

11:40 AM InvitedIn-situ X-Ray Diffraction of Brittle and Ductile Nanostructured Materials: Ralph Spolenak1; 1ETH Zurich

12:00 PM InvitedReal, Orientation and Reciprocal Space Coverage of 3DXRD at the APS 1-ID Beamline: Ulrich Lienert1; 1ANL

12:20 PMInverse Analysis of Engineering Neutron Diffraction Data: Seung-Yub Lee1; Youngshin Kim1; Hyuntae Na1; Ersan Ustundag1; 1Iowa State University

12:35 PMCompositional Effects on the Superelasticity of Gum Metal: Russell Talling1; David Dye1; 1Imperial College

12:50 PMFirst ex-situ/in-situ Measurements of Strains/Stresses at Engineering Diffractometer VULCAN at SNS: Ke An1; H.D. Skorpenske1; A.D. Stoica1; Dong Ma1; Ercan Cakmak2; Hahn Choo2; X.L. Wang1; 1Oak Ridge National Laboratory; 2The University of Tennessee

Neutron and X-Ray Studies of Advanced Materials III: Structure from Diffraction Sponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Emil Zolotoyabko, Technion

8:30 AM InvitedAtomic Structure and Nano-Structure of Natural Bio-Composites: Emil Zolotoyabko1; 1Technion

8:50 AM InvitedIn-Situ Study of Time and Thickness Dependence of Crystallization of Amorphous TiO2 Thin Films and Powders: Radomir Kuzel1; Lea Nichtova1; Zdenek Matej1; Jindrich Musil2; 1Charles University in Prague, Faculty of Mathematics and Physics; 2University of West Bohemia in Pilsen

9:10 AMLattice Distortion Formations by Low Energy Ar+ Bombardment of Epitaxial Thin Films Grown on Silicone (100): Paul Rozenak1; 1Hydrogen Energy Batteries LTD

9:25 AM InvitedVoyaging around Nacre with the X-Ray Shuttle: From Bio-Mineralisation to Prosthetics via Mollusc Phylogeny: Daniel Chateigner1; M. Morales1; L. Lutterotti1; 1Ecole Nationale Supérieure d’Ingénieurs de Caen (ENSICAEN)

9:45 AM InvitedMaterials Characterization Using the Hard X-Ray Nanoprobe Beamline at Argonne National Laboratory: Jörg Maser1; Martin V. Holt1; Robert P. Winarski1; Volker Rose1; Peter Fuesz1; Gregory Brian Stephenson1; 1Argonne National Laboratory

10:05 AM InvitedIn-Situ Characterization of Creep-Damage by X-Ray Microtomography: Krzysztof Dzieciol1; Federico Sket1; Thomas Buslaps2; Marco di Michiel2; Andras Borbely1; Anke Pyzalla3; 1Max-Planck Institut für Eisenforschung; 2European Synchrotron Radiation Facility; 3Helmholtz Zemtrum für Materialien und Energie

10:25 AM Break

10:35 AMIn Situ X-Ray Synchrotron Observations of Steel Phase Transformation under Non-Equilibrium Conditions: Wanchuck Woo1; Eliot Specht2; Zhili Feng2; Wei Zhang2; Xunli Wang2; 1Korea Atomic Research Institute; 2Oak Ridge National Laboratory

10:50 AMCharacterization of Hydride Phase Stability in Zirconium Alloys as a Function of Yield Stress with Synchrotron X-Ray Diffraction: Eric Tulk1; Matthew Kerr2; Mark Daymond1; 1Queen’s University; 2US Nuclear Regulatory Commission

11:05 AMGrowth of Anti-Phase Domains in Ternary Feco Alloys under Various Annealing Treatments and Cooling Processes: Ralph Gilles1; Michael Hofmann1; Yan Gao2; Frank Johnson2; Debashis Mukherji3; Christoph Hugenschmidt1; Philip Pikart1; 1TU Muenchen; 2GE Global Research; 3TU Braunschweig

11:20 AMEffects of Shot Peening Aluminum Alloy A356.2 Cast Plate with Steel and Glass Shot on the through-Thickness Residual Stresses: A. Ritter1; B. Kuhr1; C. Hubbard2; T. R. Watkins2; Carl Boehlert1; X. Niu3; 1Michigan State University; 2Oak Ridge National Laboratory; 3Magna Cosma International

11:35 AMResidual Stress Analysis of Resistance Spot Welding, FE Modeling and Neutron Diffraction Measurement: Liang Wang1; Sergio Felicelli2; Camden Hubbard3; Douglas Bammann1; 1Center For Advanced Vehicular Systems, Mississippi State University; 2Mechanical Engineering Department, Mississippi State University; 3Oak Ridge National Laboratory

11:50 AMDeformation Behavior of Nanocrystalline Co Measured by High-Energy X-Ray Diffraction: Ryan Ott1; Morris Wang2; Matthew Besser1; Jon Almer3; Matthew Kramer1; 1Ames Laboratory (USDOE); 2Lawrence Livermore National Laboratory; 3Argonne National Laboratory

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: ElectromigrationSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: Sung Kang, IBM Corp.; K. N. Subramanian, Michigan State University

8:30 AM Introductory Comments by K. L. Lin

8:35 AM InvitedThermomigration and Creep in Pb-Free Flip Chip Solder Joints: King-Ning Tu1; 1University of California, Los Angeles


28

Technical Program

Mo

n. A

M

9:00 AMEffect of Initial Microstructure on Electromigration Behavior of Eutectic Sn-Pb Solder Joints: Andre Lee1; Yi-Chih Lee1; K.N. Subramanian1; 1Michigan State University

9:15 AMEffects of Reinforcements Addition on Microstructural Evolution in Eutectic SnBi Solder Joints under Current Stressing: Ruihong Zhang1; Mengting Han1; Fu Guo1; Guangchen Xu1; 1Beijing University of Technology

9:30 AMElectromigration Study of Flip Chip Packages under Extra-High Current Density Tests with Temperature Control: Jia-Hong Ke1; Yu-Wei Lin1; C. R. Kao1; 1Department of Materials Science and Engineering, National Taiwan University

9:45 AMInteraction between Electromigration and Diffusionally Accommodated Interfacial Sliding at Hetero-Interfaces: Praveen Kumar1; Indranath Dutta1; 1WSU

10:00 AM Break

10:15 AMMicrostructures and Crystal Orientation of ß-Sn for Sn-Ag and Sn-Cu Solder Joints under Electromigration: Sun-Kyoung Seo1; Sung K. Kang2; Moon Gi Cho1; Hyuck Mo Lee1; 1KAIST; 2IBM T.J. Watson Research Center

10:30 AMDirect Measurement of Back Stress in Tin Strips under Electromigration by Synchrotron Radiation X-Ray: Yang Yi Lin1; Albert T. Wu1; 1National Central University

10:45 AMDiscussion on the Mechanism of Electromigration from the Perspective of Electromagnetism: Peng Zhou1; William Johnson2; 1UC Irvine; 2MSE, University of Virginia

11:00 AMCritical Conditions of Electromigration-Induced Cu Dissolution in Pb-Free Solder Joints: Jung Kyu Han1; King-Ning Tu1; 1UCLA

11:15 AMTEM Characterization of the Porous Structure Induced by High Current Density in the Flip-Chip Solder Joint: Ming-Yen Tsai1; Yen-Liang Lin1; C. Robert Kao1; 1National Taiwan University

11:30 AMThe Enhanced Growth of Sn Whisker on High Melting Temperature Sn-Pb Solder Joint by Current Stressing: Ying-Ta Chiu1; Kwang-Lung Lin1; Yi-Shao Lai2; 1Department of Materials Science and Engineering, NCKU; 2Central Labs, Advanced Semiconductor Engineering, Inc., Kaohsiung

11:45 AMStudy of Joule Heating Effects in Lead-Free Solder Joints under Various Current Densities Using Infrared Thermography: Guangchen Xu1; Fu Guo1; Andre Lee2; K.N. Subramanian2; Neil Wright2; 1Beijing University of Technology; 2Michigan State University

Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials IX: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases CommitteeProgram Organizers: Chih-ming Chen, National Chung Hsing University; Srinivas Chada, Medtronic; Sinn-wen Chen, National Tsing-Hua University; Hans Flandorfer, University of Vienna; A. Lindsay Greer, University of Cambridge; Jae-ho Lee, Hongik University; Kejun Zeng, Texas Instruments; Yee-wen Yen, National Taiwan University of Science and Technology; Wojciech Gierlotka, AGH University of Science and Technology; Chao-hong Wang, National Chung Cheng University


Session Chairs: Chih-ming Chen, National Chung Hsing University; Yee-wen Yen, National Taiwan University of Science and Technology

8:30 AM InvitedEvaluation of Current Mode and Additives in Copper Via Filling: Jin-Yong Sim1; In-Kyu Lee2; Jae-Ho Lee1; 1Hongik University; 2Korea Aerospace University

8:55 AMCarbon Nano Tube and Nickel Alloys Composite Electroplating: Ho-Kyung Um1; Heung-Yeol Lee2; Tai-Hong Yim2; Jae-Ho Lee1; 1Hong Ik University; 2Korea Institute of Industrial Technology

9:15 AMA Study on the Microstructure Evolution of Cu/Sn/Cu Bonding Stacks during Bonding and Their Mechanical Properties for the Applications of 3D Packaging: Byunghoon Lee1; Sang-Su Ha1; Jeong-Won Yoon1; Hoo-Jeong Lee1; Seung-Boo Jung1; 1Sungkyunkwan University

9:35 AMEffect of Wet Chemical Pretreatment Conditions on Cu-Cu Bonding Characteristics for 3-D IC Stacks: Jae-Won Kim1; Eun-Jung Jang1; Myeong-Hyeok Jeong1; Seungmin Hyun2; Hak-Joo Lee2; Young-Bae Park1; 1Andong National University; 2Korea Institute of Machinery and Materials

9:55 AM Break

10:15 AM InvitedTin Whisker Growth in Vacuum Thermal Cycling: Katsuaki Suganuma1; Alongheng Baated1; Seong-Jun Kim1; Keun-Soo Kim1; Norio Nemoto2; Tsuyoshi Nakagawa3; 1Osaka University; 2JAXA; 3Nippon Avionics Co., Ltd.

10:40 AMGrowth and Orientation of Tin Whiskers on an Electrodeposited Tin Thin Film under Three-Point Bending: Chih-ming Chen1; Yu-jen Chen1; 1National Chung Hsing University

11:00 AMSynthesis of Nanostructured Carbon Materials Using Commercial Paper Phenolic Board: Yi-Wei Lin1; Chih-ming Chen1; 1National Chung Hsing University

29

Technical Program

Mo

n. A

M

Processing Materials for Properties: Advanced Materials ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Akio Fuwa, Waseda University; Tonya Wolfe, University of Alberta

8:30 AM KeynoteMaterials Science for the Next Generation: David Olson1; Brajendra Mishra1; 1Colorado School of Mines

9:00 AMIncrease Production and Quality Improvement of Electrolytic Copper at Tank House in Naoshima Smelter and Refinery: Hideki Zen1; Tatsuo Ishida1; Makoto Takagi1; 1Mitsubishi Materials Corporation

9:20 AMDamage of Surface by Impact of Nitrogen Jet under Pressure and Low Temperature: Hicham Laribou1; Claude Fressengeas1; Denis Entemeyer1; Véronique Jeanclaude1; Abdel Tazibt2; 1Laboratoire de Physique et Mécanique des Matériaux; 2CRITT TJF&U

9:40 AMNon-Linear Analytical Practices for Interfacial Phenomena and Nano-Size Microstructural Properties and Behavior: John Roubidoux1; J.E. Jackson2; B. Mishra1; D.L Olson1; 1Colorado School of Mines; 2Generation 2 Materials Technology LLC

10:00 AMModernization Project of Onahama Smelter with New “O-SR Process”: Osamu Iida1; Teruyuki Matsutani1; Kenji Kiyotani2; 1Mitsubishi Materials Corporation; 2Onahama Smelting and Refining Company

10:20 AMEvaluation of Stress Corrosion Cracking Susceptibility of Drill Pipe Steels in CO2 Saturated Aqueous Solutions: Arshad Bajvani Gavanluei1; Bhola Shaily1; B Mishra1; D. Olson1; 1Colorado School of Mines

10:40 AM Break

10:50 AMPromotion of Recyclable Material Treatment at Mitsubishi Prpcess in Naoshima Smelter and Refinery: Tetsuro Sakai1; Norio Usami1; Masayuki Kawasaki1; 1Mitsubishi Materials Corporation

11:10 AMA Novel Process on Production of Thin Wall Austempered Ductile Iron Heat-Treated in the Mold: Ali-Reza Kaini-Rashid1; Abolfazl Babakhani1; Mohammad Reza. Ziaei1; 1Ferdowsi University of Mashhad

11:30 AMRemarkable Oxidation Resistance of Nanocrystalline Fe-Cr Alloys: Raman Singh1; Prabhakar Singh2; 1Monash University; 2University of Connecticut

11:50 AMDiscrete Element Simulation: An Efficient Tool for Optimizing Powder Processes from the Sintering Stage to the Final Properties: Christophe Martin1; Xiaoxing Liu1; Jean-Jacques Kadjo1; Didier Bouvard1; 1Grenoble-INP

12:10 PMCold Gas Dynamic Spraying of Titanium: A Reliable and Environmentally Friendly Coating Deposition Process: Wilson Wong1; Stephen Yue1; Eric Irissou2; Jean-Gabriel Legoux2; 1McGill University; 2National Research Council Canada

Refractory Metals 2010: Processing and Properties ISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Refractory Metals CommitteeProgram Organizers: Brian Cockeram, Bechtel-Bettis; Gary Rozak, H.C. Stark

Monday AM Room: 2AFebruary 15, 2010 Location: Washington State Convention Center

Session Chairs: Brian Cockeram, Bechtel Marine Propulsion Corporation; Gary Rozak, H. C. Starck, Inc.

8:30 AMSurface Processing of an Iridium Alloy: Evan Ohriner1; George Ulrich1; Roger Miller1; Wei Zhang1; 1Oak Ridge National Laboratory

8:55 AMEffect of Tantalum on the Tensile Impact Ductility and Fracture Behavior of Iridium: E. P. George1; C. Carmichael1; A. Gali1; E. Ohriner1; 1Oak Ridge National Laboratory

9:20 AMEffects of Thermo-Mechanical Processing on Texture and Microstructure of Pure Molybdenum Plates for Optimum Sputtering Performance: Gary Rozak1; Peter Jepson1; 1HC Starck Inc

9:45 AMThe Role of Stress State and Wrought Processing on the Fracture Toughness and Toughening Mechanisms of Wrought Unalloyed Molybdenum, TZM Molybdenum, ODS Molybdenum, and Molybdenum Alloys: Brian Cockeram1; 1Bechtel-Bettis

10:10 AM Break

10:25 AMPlastic Strain Concentration at Grain Boundaries in a 50Mo-50Re Alloy: Tongguang Zhai1; Jianhui Xu2; 1University of Kentucky; 2Smith International

10:50 AMProcessing and Properties of Tungsten-25%Rhenium with and without Hafnium Carbide: Todd Leonhardt1; James Ciulik2; 1Rhenium Alloys, Inc.; 2The University of Texas at Austin

11:15 AMFracture Behavior of Polycrystalline Tungsten: Bernd Gludovatz1; Stefan Wurster1; Andreas Hoffmann2; Reinhard Pippan1; 1Erich Schmid Institute of Materials Science / Austrian Academy of Sciences; 2Plansee Metall GmbH

11:40 AMStudy the Activated Sintering of Tungsten as a Function of Heating Mode: Avijit Mondal1; Kranti V. Reddy1; Anish Upadhyaya1; Dinesh Agrawal1; 1Indian Institute of Technology, Kanpur

Solar Cell Silicon: Production and Recyling: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Anne Kvithyld, SINTEF; Gregory Hildeman, Solar Power Industries

Monday AM Room: 2BFebruary 15, 2010 Location: Washington State Convention Center

Session Chair: Anne Kvithyld, SINTEF

8:30 AMElectrochemical Production of Affordable Solar Grade Silicon: Antony Cox1; Derek Fray1; 1University of Cambridge


30

Technical Program

Mo

n. A

M

8:55 AMElectrorefining of Metallurgical Grade Silicon in Molten Salts: Geir Martin Haarberg1; Shuihua Tang1; Karen Osen2; Henrik Gudbrandsen2; Sverre Rolseth2; Ole Edvard Kongstein2; Shulan Wang3; 1Norwegian University of Science and Technology; 2SINTEF; 3Northeastern University

9:20 AMPreparation of High Purity Silicon by Electrolysis-Vacuum Distillation: Jidong Li1; Mingjie Zhang2; Yiyong Wang1; 1School of Materials Science and Engineering; University of Science and Technology Liaoning; 2School of Metallurgy, Northeastern University

9:45 AM Break

10:20 AMHierarchy of Slurry Recycling Options: Walter Radeker1; 1CRS Reprocessing Services LLC

10:45 AMWetting Properties of Molten Silicon with Graphite Materials: Arjan Ciftja1; Merete Tangstad2; Thorvald Engh2; 1SINTEF; 2Norwegian University of Science and Technology

11:10 AMMechanical Properties of Fine Grained Polysilicon Grown in Fluidized Bed Reactors: Mohamad Zbib1; David Bahr1; Wayne Osborne2; Grant Norton1; 1Washington State University; 2REC Solar Grade Silicon LLC

11:35 AM Panel Discussion Recycling Needs led by Gregory Hildeman, Solar Power Industries

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Atomic-Level Structure and CompositionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chairs: Michael Demkowicz, Massachusetts Institute of Technology; Emmanuelle Marquis, University of Oxford

8:30 AM InvitedAtomic-Scale STEM-EELS Mapping of Structure, Chemistry, Bonds and Electronic Properties across Functional Interfaces: Christian Colliex1; 1CNRS

9:00 AMAtomic Scale Structure and Composition across G/G’ Interfaces in Ni-Base Superalloys: Srinivasan Rajagopalan1; J.Y. Hwang2; Soumya Nag2; A. Singh2; G.B. Viswanathan3; J. Tiley4; Rajarshi Banerjee2; Hamish Fraser1; 1The Ohio State University; 2University of North Texas; 3UES Inc.; 4Air Force Research Laboratory

9:20 AMChemomechanical Analysis of Metal Nanoparticle Interfaces under Extreme Environments via Molecular Dynamics Simulations: Hansohl Cho1; Krystyn Van Vliet1; 1Massachusetts Institute of Technology

9:40 AMMeasurement of the Interface Width by Atom Probe Tomography: Michael Miller1; Ai Serizawa1; 1ORNL

10:00 AM Break

10:20 AM InvitedStructure and Chemistry of Nanometer-Thick Intergranular Films at Au-Al2O3 Interfaces: Wayne Kaplan1; Mor Baram1; 1Technion - Israel Institute of Technology

10:50 AMThe Structure of Uranium Dioxide Grain Boundaries and its Influence on Fission Gas Segregation: Pankaj Nerikar1; Chris Stanek1; Blas Uberuaga1; Susan Sinnott2; 1Los Alamos National Laboratory; 2Department of Materials Science and Engineering, University of Florida

11:10 AMSpatially Resolved Compositional Measurements across Interfaces, Phase Separations, and Non-Conservative Faults in Complex Oxides: Srinivasan Rajagopalan1; G.B. Viswanathan2; David McComb3; Jan Ringnalda4; Hamish Fraser1; 1The Ohio State University; 2UES Inc.; 3Imperial College London; 4FEI Company

11:30 AMNanoscale Characterization of a Nanostructured Fe-Y2O3 Composite Material: Mathilde Brocq1; Bertrand Radiguet2; Fabrice Legendre1; Fabien Cuvilly2; Philippe Pareige2; Jean-Marie Lebreton2; 1SRMP - CEA; 2GPM-Université de Rouen

11:50 AMChemical Interface Width and Triple Line Transport in Metallic Multilayers: Guido Schmitz1; Patrick Stender1; Constantin Ene2; Henning Galinski1; 1Westf. Wilhelms-Universität; 2Universität Göttingen

Surface Engineering for Amorphous-, Nanocrystalline-, and Bio-Materials: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS: Surface Engineering CommitteeProgram Organizers: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International Univesity; Sudipta Seal, University of Central Florida; Narendra Dahotre, University of Tennessee


Session Chair: Narendra Dahotre, University of Tennessee


8:35 AM InvitedDevelopment of Multi-Functional Nanostructured and Composite Coatings for Tribological Applications: Ali Erdemir1; 1Argonne National Laboratory

9:00 AM InvitedThe Tribological Behaviour of Graded Nanocrystalline Nickel Coatings: Sundararajan G1; Nitin Wasekar1; 1ARCI

9:25 AM InvitedEvolution of Microstructure in Laser Clad Coatings Studied by Orientation Imaging Microscopy: Václav Ocelík1; Ivan Furár1; Jeff De Hosson1; 1University Groningen/M2i

9:50 AMResidual Stresses in PS 304 Tribological Coating: Pnina Ari-Gur1; Simon Narasimhan1; Mark Croft2; Zhong Zhong3; Thomas Gnäupel-Herold4; Malcolm K. Stanford5; Christopher DellaCorte5; Phillip B. Abel5; 1Western Michigan University; 2Rutgers University; 3Brookhaven National Laboratory; 4National Institute of Standards and Technology; 5National Aeronautics and Space Administration

10:10 AMMicrostructural Assessment Associated with Micropitting in Rolling Contact Fatigue: Fang Cao1; Peter Jacobs1; Martin Webster1; 1ExxonMobil Research and Engineering

10:30 AM Break

31

Technical Program

Mo

n. A

M

10:45 AMEngineering Non-Stick, Pro-Stick/Adhesion and Anti-Corrosion Surfaces with Self-Assembled Monolayer of Phosphonate (SAMP) Technology: Eric Bruner1; 1Aculon, Inc.

11:05 AMAnisotropic Nanaofriction Behavior of Aligned Carbon Nanotube Carpet: Jiangnan Zhang1; Yuekai Sun1; Lijie Ci1; P.M. Ajayan1; Jun Lou1; 1Rice University

11:25 AMDry Sliding Wear of Nanocrystalline Al - 12.6 at. % Si: I. Baker1; M. Gwaze1; Y. Sun1; A.T. Dohner1; A. Grosse1; T. Tran1; F.E. Kennedy1; P.R. Munroe2; 1Dartmouth College; 2University of New South Wales

11:45 AMWear Resistance and Adherence of TiO2 Sol-Gel Thin Films: Miguel Alterach1; Pablo Favilla1; Mario Rosenberger1; Alicia Ares1; Carlos Schvezov1; 1Universidad Nacional de Misiones - CONICET

12:05 PMFretting Corrosion Behaviour of Untreated and Surface Engineered Ti-6Al-4V Alloy: Satendra Kumar1; Sankara Narayanan TSN1; Ganesh Sundara Raman S2; Seshadri S.K.2; 1National Metallurgical Laboratory, Madras Centre; 2Indian Institute of Technology Madras

The Aluminium Industry – Perspectives on our Future: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizer: Geoff Bearne, Rio Tinto Alcan

Monday AM Room: Ballroom 6AFebruary 15, 2010 Location: Washington State Convention Center

Session Chair: Geoff Bearne, Rio Tinto Alcan


8:35 AM PlenaryThe Challenges that Aluminium Faces as Material of Choice: Frank Field1; 1Massachusetts Institute of Technology; 2CRU International Ltd

9:05 AM PlenaryThe Strategic Impact of Changing Energy Markets on the Aluminum Industry: Robin Adams1; Kelly Driscoll2; 1CRU Strategies; 2CRU International Ltd

9:35 AM PlenaryThe Impact of Economic Highs and Lows on Aluminium Smelter Construction: Cesar Inostroza1; 1SNC-Lavalin Inc.

10:05 AM Break

10:25 AM PlenaryChallenges and Opportunities Relative to Increased Usage of Aluminum within the Automotive Industry: Mark W. Verbrugge1; Paul E. Krajewski1; Anil K. Sachdev1; James G. Schroth1; David R. Sigler1; Blair E. Carlson1; 1General Motor Research and Development Center

10:55 AM PlenaryAluminum’s Sustainability Strategy: Steve Williamson1; 1ARCO Aluminum

11:25 AM PlenaryAluminum Recycling in a Carbon-Constrained World: Observations and Opportunities: Subodh Das1; 1Phinix LLC


The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Computational Materials Science ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, Univ of Groningen


Session Chairs: Adrian Sutton, Imperial College London; David Pope, University of Pennsylvania


8:35 AM Charles McMahon

8:50 AM David Pettifor

9:00 AM KeynoteAtomistic Modeling of Defects through the Ages: Vasek Vitek1; 1University of Pennsylvania

9:25 AM InvitedChallenges in Modelling TCP Phase Formation in Ni-Based Superalloys: David Pettifor1; Bernhard Seiser1; Thomas Hammerschmidt2; Aleksey Kolmogorov1; Ralf Drautz2; 1University of Oxford; 2ICAMS

9:50 AM InvitedDislocation-Based Simulation of the Migration of Low-Angle Grain Boundaries: David Srolovitz1; Adele Lim2; Mikko Haataja2; 1Yeshiva University; 2Princeton University

10:15 AM Break

10:40 AM InvitedDiscrete Dislocation and Multi-Scale Analyses of Fatigue Crack Growth: Alan Needleman1; 1University of North Texas

11:05 AM InvitedDisplacive Processes in Systems with BCC Parent Lattice: Vaclav Paidar1; 1Institute of Physics AS CR vvi

11:30 AM InvitedCoupling of the Continuum Theory of Dislocations and Structural Phase Transformations at the Mesoscale: Roman Groger1; Turab Lookman2; 1Academy of Sciences of the Czech Republic; 2Los Alamos National Laboratory


32

Technical Program

Mo

n. A

M

Three-Dimensional Materials Science VI: Three-Dimensional Crystallography and Grain Boundary AnalysisSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: David Rowenhorst, U S Naval Research Laboratory; Stuart Wright, EDAX-TSL

8:30 AM InvitedDeriving the Grain Boundary Character Distribution and Relative Grain Boundary Energies from Three Dimensional EBSD Data: Gregory Rohrer1; 1Carnegie Mellon University

9:00 AMDeriving the Relative Grain Boundary Areas and Energies in Nickel from Three Dimensional EBSD Data: Jia Li1; Gregory Rohrer1; Shen Dillion2; 1Carnegie Mellon University; 2 University of Illinois at Urbana-Champaign

9:20 AMCalculation of Grain Boundary Angles at Triple Junctions in 3D Digitized Microstructures: Michael Chandross1; Elizabeth Holm1; 1Sandia National Laboratories

9:40 AM Break

10:10 AM InvitedThree-Dimensional Grain Boundary Networks: Modeling and Connections to Experimental Data: Megan Frary1; 1Boise State University

10:40 AMThree Dimensional Analysis of Grain Curvature and Crystallography: David Rowenhorst1; Alexis Lewis1; George Spanos1; Gregory Rohrer2; Anthony Rollett2; 1US Naval Research Laboratory; 2Carnegie Mellon University

11:00 AMSynthesizing Annealing Twins in Three-Dimensional Voxel-Based Microstructures: Lisa Chan1; Anthony Rollett1; Gregory Rohrer1; 1Carnegie Mellon University

11:20 AMCrystallographic Orientation Determined from the Pattern of Solidified Structure: Hisao Esaka1; Kei Shinozuka1; 1National Defense Academy

11:40 AM3D Monte-Carlo Simulation of Microstructural Evolution upon Heating of Deformed LCB Titanium Alloy: Sergii Shevchenko1; Orest Ivasishin1; Elena Pereloma2; Azdiar Gazder2; 1Institute for Metal Physics; 2University of Wollongong

Ultrafine Grained Materials – Sixth International Symposium: Processing-Microstructure-Properties ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: S. Lee Semiatin, U.S. Air Force Research Laboratory; En (Evan) Ma, Johns Hopkins University; Xavier Sauvage, University of Rouen, CNRS; Henry Rack, Clemson University


8:35 AM InvitedSuperior Properties of Ultrafine-Grained Metals Produced by SPD Processing: Ruslan Valiev1; 1Ufa State Aviation Technical University

8:55 AMNanostructures and Magnetic Properties of FePd Alloys Processed by Severe Plastic Deformation: Xavier Sauvage1; Abdelahad Chbihi1; Didier Blavette1; Dmitry Gunderov2; A.G. Popov3; 1University of Rouen, CNRS; 2Ufa State Aviation Technical University; 3Institute of Metal Physics

9:10 AM InvitedHigh Tensile Strength and Ductility in Nanocrystalline and Ultrafine-Grained HCP Cobalt: Xiaolei Wu1; Yuntian Zhu2; 1Institute of Mechanics, Chinese Academy of Sciences; 2North Carolina State University

9:30 AMEffect of Strain Path and Texture on Grain Refinement in Severe Plastic Deformed Copper: Chengfan Gu1; Laszlo Tóth2; Rimma Lapovok1; Chris Davies1; 1Monash University; 2Université Paul Verlaine de Metz

9:45 AMSuperior Grain Refinement via Intelligent ECAE Processing of Materials: Suveen Mathaudhu1; Laszlo Kecskes1; Jae-Taek Im2; David Foley2; Majid Al-Maharbi3; Ibrahim Karaman2; K. Ted Hartwig2; 1U.S. Army Research Laboratory; 2Texas A&M University; 3Sultan Qaboos University

10:00 AM InvitedHigh Pressure Torsion of Pure Metals for Universal Plot: Kaveh Edalati1; Zenji Horita1; 1Kyushu University

10:20 AM Break

10:35 AM InvitedNanostructures, Grain Refinement and Mechanical Properties in Al–Mg Alloys Subjected to High Pressure Torsion: Hans Roven1; Manping Liu2; Maxim Murashkin3; Ruslan Valiev3; Tamas Ungár4; Levente Balogh4; 1Norwegian University of Science and Technology (NTNU); 2Shanghai Jiao Tong University; 3Ufa State Aviation Technical University; 4Eötvös University

10:55 AMCrystal Size Influences the Propensity for Deformation Twinning: Evan Ma1; Ju Li2; Qian Yu3; Zhiwei Shan4; Jun Sun3; 1Johns Hopkins University; 2University of Pennsylvania; 3Xi’an Jiaotong University; 4Hysitron Inc.

11:10 AMEnhanced Strain Hardenability of Uniform, Submicrocrystalline Dual-Phase Steel Processed via Equal Channel Angular Pressing and Intercritical Annealing: Young Gun Ko1; C.W. Lee2; S. Namgung2; D.H. Shin2; 1Yeungnam University; 2Hanyang University

33

Technical Program

Mo

n. A

M

1:25 AM InvitedSuperplasticity in Nanocrystalline Metallic and Ceramic Materials: Amiya Mukherjee1; 1University of California

11:45 AMECAE Processing of Pure and Mg Alloy Powders: Effect of Confinement, Route, and Temperature: Laszlo Kecskes1; Kristopher Darling1; Micah Gallagher2; Suveen Mathaudhu1; David Foley3; Robert Barber3; Karl Hartwig3; 1US Army Research Laboratory; 2Dynamic Science, Inc.; 3Texas A&M University

12:00 PMShape Memory Characterization of Aged Ti-50.6Ni: Henry Rack1; Astrid Mueller1; Erica Sampson1; Ruslan Valiev2; 1Clemson University; 2Ufa State Aviation Technical University

12:15 PM InvitedThe Brittle-To-Ductile Transition in Severely Deformed Low Carbon Steel: Masaki Tanaka1; Kenji Higashida1; Tomotsugu Shimokawa2; 1Kyushu University; 2Kanazawa University

Ultrafine Grained Materials – Sixth International Symposium: Processing-Microstructure-Properties IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Donald Lesuer, Lawrence Livermore National Laboratory; Megumi Kawasaki, University of Southern California; Challapalli Suryanarayana, University of Central Florida; Zenji Horita, Kyushu University


8:35 AM InvitedFlow Stress Anisotropy and Tension-Compression Asymmetry in Ultrafine Grained AZ31B Magnesium Alloy: Ibrahim Karaman1; Majid Al-Maharbi1; David Foley1; Irene Beyerlein2; K.Ted Hartwig1; Suveen Mathaudhu3; Laszlo Kecskes3; 1Texas A&M University; 2Los Alamos National Laboratory; 3U.S. Army Research Laboratory

8:55 AMRole of Ultrafine Grain Size in the HCP - FCC Allotropic Transformation in Ti, Zr, and Hf: Uma Seelam1; Gagik Barkhordarian2; C. Suryanarayana1; 1University of Central Florida; 2GKSS Research Center

9:10 AMUltra-High Strength of Nanocrystalline Iron-Based Alloys Produced by High Pressure Torsion: Tadahiko Furuta1; Shigeru Kuramoto1; Tetsu Osuna1; Zenji Horita2; 1Toyota Central R & D Labs., Inc.; 2Kyusyu University

9:25 AM InvitedFatigue Behavior of Friction Stir Processed Ultrafine Grained Aluminum and Magnesium Alloys: Rajiv Mishra1; Partha De1; Rajeev Kapoor1; Wei Yuan1; 1Missouri University of Science and Technology

9:45 AMInfluence of Grain Boundary Character and Strain Rate on the Ductility of Ultrafine Grained AA 5052: Rajeev Kapoor1; Nilesh Kumar1; Rajiv Mishra1; 1Missouri University of Science and Technology

10:00 AMFatigue Crack Growth Behaviour of Ultrafine Grained Copper: Jelena Horky1; Golta Khatibi1; Brigitte Weiss1; Michael Zehetbauer1; 1Faculty of Physics, University of Vienna

10:15 AMImplications of Deformation under Constraint in Development of UFG Microstructure in an Austenitic Stainless Steel: Chiradeep Gupta1; J. B. Singh1; Swetha Mulki2; R. Kapoor3; Apu Sarkar1; I. Samajdar2; J. K. Chakravartty1; 1Bhabha Atomic Research Centre; 2Indian Institute of Technology, Powai; 3Department of Materials Science and Engineering, Missouri University of Science and Technology

10:30 AM Break

10:45 AM InvitedThe Ambient-Temperature Mechanical Properties of UFG Ag with Nanotwins Using Microshear Tests: Michael Kassner1; Andrea Hodge1; 1USC

11:05 AMFormation of Ultrafine Grains during Friction Stir Processing of Ti-6Al-4V: Adam Pilchak1; James Williams2; 1Universal Technology Corporation; 2The Ohio State University

11:20 AMCoarsening-Induced Fatigue-Crack Initiation in Several Nanocrystalline Nickel Alloys: Henry Padilla1; Brad Boyce1; Paul Kotula1; Elizabeth Holm1; 1Sandia National Labs

11:35 AM Poster PreviewTexture and Microstructure Evolution in Ultrafine Grained AZ31 Processed by EX-ECAP: Milos Janecek1; 1Charles University

11:40 AMEffect of Strain Reversals on Processing by High-Pressure Torsion: Megumi Kawasaki1; Byungmin Ahn1; Terence Langdon1; 1University of Southern California

11:55 AM InvitedStrengthening Mechanisms in Deformed and Annealed Nanostructured Metals: Xiaoxu Huang1; Naoya Kamikawa2; Niels Hansen1; 1Risø National Laboratory for Sustainable Energy, Technical University of Denmark; 2Tohoku University

12:15 PMComposition and Structure of Nitrogen-Containing Dispersoids in Tri-Modal Metal Matrix Composites: Clara Hofmeister1; Bo Yao1; Yongho Sohn1; Timothy Delahanty2; Mark van den Bergh3; Kyu Cho4; 1University of Central Florida; 2Pittsburgh Materials Technologies, Inc.; 3DWA Aluminum Composites; 4U.S. Army Research Laboratory

12:30 PMNano-Scale Strengthening from Grains, Sub-Grains and Particles in Fe-C Alloys: Donald Lesuer1; Chol Syn1; Oleg Sherby2; 1Lawrence Livermore National Laboratory; 2Stanford University


34

Technical Program

Mo

n. P

M

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Nano-Sensors and Magnetic PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Monday PM Room: 214February 15, 2010 Location: Washington State Convention Center

Session Chair: Seong Jin Koh, University of Texas at Arlington; Nitin Chopra, The University of Alabama

2:00 PM Introductory Comments

2:05 PM InvitedGold Nano-Engineered Mercury Sensor for Alumina Refineries: Suresh Bhargava1; 1RMIT University

2:25 PMFundamental Studies and On-Chip Integration of Nanoporous Energetic Silicon: Collin Becker1; Luke Currano2; Wayne Churaman2; Conrad Stoldt1; 1University of Colorado; 2U.S. Army Research Lab

2:45 PMGas Sensing Behavior of Nanostructured CoSb2O6 Prepared by a Colloidal Method: Hector Guillen-Bonilla1; Carlos Michel2; Juan Moran-Lazaro2; Juan Reyes-Gomez3; Dario Pozas-Zepeda3; 1Centro de Enseñanza Tecnica Industrial; 2Universidad de Guadalajara; 3Universidad de Colima

3:05 PMCarbon Dioxide Gas Sensing Properties of CoSb2O6 Prepared by a Colloidal Method: Hector Guillen-Bonilla1; Carlos Michel2; Juan Moran2; Juan Reyes3; Dario Pozas3; 1Centro de Enseñanza Tecnica Industrial; 2Universidad de Guadalajara; 3Universidad de Colima

3:25 PMMulti-Walled Carbon Nanotube Sensor Devices for Gas Sensing Applications: Raghu Mangu1; Suresh Rajaputra1; Srikanth Durgamahanty1; Dali Qian1; Rodney Andrews1; Vijay Singh1; 1University of Kentucky

3:45 PM Break

3:55 PMElectromechanical Coupling Behaviors of Suspended Low Dimensional Materials and Applications to Sensing: Hao Lu1; Li Song1; P.M. Ajayan1; Jun Lou1; 1Rice University

4:15 PMFunctionalization of Single TiO2 Nanotubes for Bio-Sensor Applications: Mingun Lee1; Dongkyu Cha1; Jie Hunang1; Hyunjung Shin2; Moon J. Kim1; Jiyoung Kim1; 1University of Texas at Dallas; 2Kookmin University

4:35 PMEnhanced Irreversibility Field and Critical Current Density in Superconducting NbC Integrated with Aligned Carbon Nanotubes: Guifu Zou1; Hongmei Luo2; Scott Baily1; Yingying Zhang1; Junyi Zhai1; Jie Xiong1; Quanxi Jia1; 1Los Alamos National Laboratory; 2New Mexico State University

4:55 PMNanoparticles with Double Perovskite La2BB’O6 Composition: Yuanbing Mao1; 1Washington State University


Advances in Composite, Cellular and Natural Materials: Cellular and Porous MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: David Dunand, Northwestern University; Markus Buehler, Massachusetts Institute of Technology

2:00 PM KeynoteCellular Materials in Nature: Lorna Gibson1; Michael Ashby2; 1MIT; 2Cambridge University Engineering Department

2:40 PMMulti-Scale Osteointegration of Biphasic Calcium Phosphate Bone Scaffolds: Amy Wagoner Johnson1; 1University of Illinois at Urbana-Champaign

3:00 PMShape-Memory NiTi Foams: David Dunand1; 1Northwestern University

3:20 PMMechanical and Biological Properties of Titanium Syntactic Foams: Xiaobing Xue1; Victoria Kearns1; Rachel Williams1; Yuyuan Zhao1; 1The University of Liverpool

3:40 PM Break

4:00 PMMechanical Behavior of Nanoporous Pt: Antonia Antoniou1; Dhriti Bhattacharyya2; Pat Dickerson2; Nathan Mara2; 1Georgia Institute of Technology; 2Los Alamos National Laboratory

4:20 PM InvitedElastic Modulus Study of Nanoporous Au Foams: Andrea Hodge1; Monika Biener2; Juergen Biener2; 1University of Southern California; 2LLNL

4:40 PMEffect of Partial Filling of Cells on Mechanical Strength of WBK Cores under Compression and Shear: Ki-Ju Kang1; Jong-Sun Park1; 1Chonnam National University

5:00 PMInfluence of Porosity and Microstructure on Thermal Properties of Laser Processed Ni and Ti6Al4V Alloy: Felix Espana1; Vamsi Krishna Balla1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

5:20 PMMechanical Properties of LCS Porous Steel: Comparison between the Dissolution and Decomposition Routes: Miao Lu1; Yuyuan Zhao1; 1The University of Liverpool

Alumina and Bauxite: Bayer Process Chemistry and Alumina Quality ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Fred Williams, CMIS Corporation


35

Technical Program

Mo

n. P

M

2:10 PMDevelopment of Particle Breakdown and Alumina Strength during Calcination: Benny Raahauge1; Claus Jensen-Holm1; Susanne Wind1; 1FLSmidth Denmark

2:40 PMEffect of Environmental Light on the Raman Spectrum of Sodium Aluminate Liquors: Jianguo Yin1; Wangxing Li1; Zhonglin Yin1; Zhanwei Liu1; Zhaohui Su1; 1Zhengzhou Research Institute Aluminum Corporation of China Limited

3:10 PM Break

3:30 PMEffect of Na2O on Alumina Leaching and Self-Disintegrating Property of Calcium Aluminate Slag: Sun Huilan1; Wang Bo1; Bi Shiwen2; 1Hebei University of Science and Technology; 2Northearstern University

4:00 PMImprovement of Product Quality in Circulating Fluidized Bed Calcination: Cornelis Klett1; Michael Missalla1; Roger Bligh2; 1Outotec GmbH; 2Outotec (Australasia) Pty. Ltd.

Aluminum Alloys: Fabrication, Characterization and Applications: Numerical ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: Zhengdong Long, Kaiser Aluminum

2:00 PMConstitutive Relations for Plastic Deformation in a 5754 Sheet: Lin Hu1; Stephen Banovic2; Tim Foecke2; Mark Iadicola2; Anthony Rollett1; 1Carnegie Mellon University; 2National Institute of Standards and Technology

2:20 PMModeling Processing and Performance of an Al-Zn-Mg Alloy: John Chinella1; 1U.S. Army Research Laboratory

2:40 PMPerturbed Bi-Particle Model of Deformation of Commercial Aluminum Alloys: Yansheng Liu1; Xiyu Wen2; Ranall Bowers1; Xiaoxuan Li1; Shridas Ningileri2; 1SECAT Inc; 2University of Kentucky

3:00 PMModeling the Solidification under Pressure Casting Process for Aluminum Alloys: Edward Druschitz1; Alan Druschitz1; Robin Foley1; 1University of Alabama at Birmingham

3:20 PMAn Integrated Computational Tool for Precipitation Simulation of Multi-Component Aluminum Alloys: Weisheng Cao1; Kaisheng Wu1; Fan Zhang1; Shuanglin Chen1; Ying Yang1; Y. Austin Chang2; Jianzheng Guo3; Mark Samonds3; 1CompuTherm LLC; 2University of Wisconsin - Madison; 3ESI Group

3:40 PM Break

3:55 PM Invited2010 LMD Young Leader Professional Development Award Winner: Ultrasonic Welding of Aluminum Wires for Cables Harnesses in the Automotive Industry: Frank Balle1; Guntram Wagner1; Dietmar Eifler1; 1University of Kaiserslautern, Institute of Materials Science and Engineering

4:15 PMPhase-Field Simulations of Microstructure Formation in A356 during Casting: Markus Apel1; Antoine Carre1; Bernd Böttger1; 1Access e. V.

4:35 PMModeling Non-Isothermal Annealing in Precipitate Hardening Aluminum Alloys: Microstructural Simulation: Panthea Sepehrband1; Shahrzad Esmaeili1; Haiou Jin2; 1University of Waterloo; 2Novelis Global Technology Centre

4:55 PMPrediction of Microstructure and Mechanical Properties in Aluminum Castings after Heat Treatment: Jianzheng Guo1; Weisheng Cao2; Sam Scott3; Tony Kronenberger4; Joe Hirvela4; 1ESI US R&D; 2CompuTherm LLC; 3ESI Group NA; 4CPP-Minneapolis

5:15 PMStudy of a Geometrically Necessary Dislocations Field near the Interface of a Deformed Aluminum Bicrystal: Alankar Alankar1; Ioannis Mastorakos1; David Field1; 1Washington State University

Aluminum Reduction Technology: Aluminium Smelter: Environment, Health and SafetySponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chairs: Bob McCulloch, Bechtel Corporation; Robert Baxter, Bechtel Corp


2:05 PMModern Potline Gas Treatment Technology for High Amperage Pots - The Alcoa Fjardaal Experience: Alain Moras1; Neal Dando1; Bernard Cloutier2; Philippe Dumortier2; Hugues Vendette2; 1Alcoa; 2Solios Environnement Inc.

2:30 PMHeat Recovery from the Exhaust Gas of Aluminum Reduction Cells: Martin Fleer1; Odd-Arne Lorentsen2; William Harvey3; Halldor Palsson4; Gudrun Saevarsdottir3; 1Reyst, Reykjavik Energy School of Sustainable Systems; 2Norsk Hydro; 3Reykjavik University; 4University of Iceland

2:55 PMIncreased Energy Efficiency and Reduced HF Emissions with New Heat Exchanger: Anders Sorhuus1; Geir Wedde1; Ketil Rye2; Gaute Nyland2; 1Alstom; 2Alcoa Mosjøen

3:20 PMReduction Line-5 DC Electrical Hazard: Mohsen Shukralla1; 1Aluminium Bahrain (Alba)

3:45 PM Break

3:55 PM2008 Global Anode Effect Survey Results: Jerry Marks1; Chris Bayliss2; 1J. Marks & Associates; 2International Aluminium Institute

4:20 PMThe Applicability of Carbon Capture and Sequestration in Primary Aluminium Smelters: Stephan Broek1; Sanjiv Save1; 1Hatch Ltd

4:45 PMApplication of a Method for the Determination of PFC Emissions during Aluminum Pot Startup: Jean-Nicolas Maltais1; Josette Ross1; Alain Marcoux1; 1Rio Tinto Alcan

5:10 PMAluminum Fluoride – A Users Guide: Stephen Lindsay1; 1Alcoa, Inc.

5:35 PMDissolution Behavior of Aluminum Dross in Aluminum Electrolyte: Weiqin Fu1; Zhaowen Wang1; Youjian Yang1; Xianwei Hu1; 1Northeastern University



36

Technical Program

Mo

n. P

M

Aluminum Reduction Technology: Aluminium Smelter: EquipmentSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chairs: Kevin Watson, Bechtel Corporation; John (Jack) Judson, Bechtel Corporation


2:05 PMImproving Heat Dissipation and Cell Life of Aged Reduction Lines at Aluminium Bahrain (Alba): Abdulla Ahmed1; K.S.R. Raghavendra1; Barry Welch2; 1Aluminium Bahrain (Alba); 2University of New South Wales (UNSW) & Welbank, Consulting Limited

2:30 PMUpdate on the Evaluation of HF Emission Reduction Using Covered Anode Trays: Jean-Pierre Gagne1; Rene Minville1; Neal R Dando2; Gilles Dufour3; Mike Gershenzon2; Pierre Champoux3; Alain Moras3; 1STAS; 2Alcoa Technical Center; 3Alcoa Canada

2:55 PMAutomated Anode Gauging: Said Al Maqbali1; C. Smith1; J. Raman1; M. Angirash1; S. Abdullah1; S. Thirunavukkarasu1; R. Kulkarni1; P. Marchand2; S. David2; P. Boucher2; 1Sohar Aluminium Company; 2ECL™

3:20 PMKeeping the Pace of Continuous Improvement by Retrofitting Pot Tending Machines: José Barry1; Fidias Roriguez1; Jesus Imery1; 1CVG Venalum

3:45 PM Break

3:55 PMNew Concepts for Bulk Materials Plants for the Aluminium Producing Industry – From Raw Material Receiving to Electrolysis Cells: Stefan Skirde1; 1Coperion GmbH

4:20 PMAlfeed, a New Alumina Feeding System to Aluminium Pots: Sivert Ose1; Anders Sorhuus1; Odd Bjarno1; Geir Wedde1; 1Alstom

4:45 PMElectrolysis Pot J Hooks New Design: Positive Impacts on Performance and Environment: Nicolas Dupas1; Damien Rose1; 1ECL

5:10 PMCleaning and Maintenance of Crucibles and Siphons/Tubes: Dominique Prive1; Pascal Côté1; Robin Boulianne1; 1STAS

5:35 PMErosion of Ferrous Alloys by Liquid Aluminum: Mandeep Sidhu1; Milo Kral1; 1University of Canterbury


Biological Materials Science: Bio-inspired Materials Design and Processing II: Bioceramics and BiomineralizationSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chairs: Amit Bandyopadhyay, Washington State University; Mehmet Sarikaya, University of Washington

2:00 PM InvitedNovel Sol-Gel Bioactive Glasses for Tissue Engineering: John Mitchell1; 1Oregon Health and Science University

2:30 PMFactors Affecting the Dissolution of Resorbable Bioactive Glasses: Satadru Kashyap1; Hamidreza Pirayesh1; John Nychka1; Ding Li2; Fuqian Yang2; 1University of Alberta; 2University of Kentucky

2:50 PMMechanical and Biological Characterization of Dense Nanocrystalline HA Consolidated by Field-Assisted Sintering: Tien Tran1; James Shackelford1; Joanna Groza1; 1University of California, Davis

3:10 PM InvitedNanoscale Calcium Phosphates in Bone Implants and Drug Delivery: Susmita Bose1; 1Washington State University

3:40 PM Break

3:50 PM InvitedCrab Shell Osteogenesis: Otto Wilson1; 1Catholic University of America

4:20 PMUnveiling the Formation Mechanism of Pseudo Single-Crystal Aragonite Platelets in Nacre: Xiaodong Li1; Zaiwang Huang1; 1University of South Carolina

4:40 PMOsteoinductive Potential of Biphasic Calcium Phosphate Scaffolds with Multi-Scale Porosity: Amy Wagoner Johnson1; 1University of Illinois at Urbana-Champaign

5:00 PMGrowth of Nacre in Abalone: Maria Lopez1; P.Y. Chen1; K. Chumbimuni-Torres1; J. Wang1; J. McKittrick1; M.A. Meyers1; 1UCSD

5:20 PMBioinspired Synthetic Laminates: Gustavo Hirata1; Sandra Diaz1; Po-Yu Chen2; Marc Meyers2; Joanna McKittrick2; 1Center for Nanoscience and Nanotechnology; 2UC San Diego

37

Technical Program

Mo

n. P

M

Bulk Metallic Glasses VII: Structures and Mechanical Properties IISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: A. Greer, University of Cambridge; Dan Miracle, Air Force Research Laboratory

2:00 PM KeynoteAnisotropy in Metallic Glasses: A. Greer1; 1University of Cambridge

2:30 PMCondensed Bond Enthalpies in Metallic Elements, Alloys and Compounds: Dan Miracle1; James Dahlman2; Amanda Dahlman2; Garth Wilks3; 1Air Force Research Laboratory; 2SOCHE; 3General Dynamics, Inc.

2:40 PM InvitedInvestigation of Homogeneous and Inhomogeneous Plastic Flow in Metallic Glasses: Katharine Flores1; Wendelin Wright2; Wolfgang Windl1; 1The Ohio State University; 2Santa Clara University

3:00 PMAging and Plastic Flow in Metallic Glasses: Monte Carlo Simulations Based on the Activation-Relaxation Technique: David Rodney1; Christopher Schuh2; 1Grenoble Institute of Technology; 2Massachussetts Institute of Technology

3:10 PM InvitedInhomogeneous to Homogeneous Transition in an Au-Based Metallic Glass during Microcompression at Elevated Temperatures: Shuangxi Song1; T.G. Nieh1; J.C. Huang2; J.S.C Jang3; 1The University of Tennessee; 2National Sun Yet-sen University; 3National Central University

3:30 PM Break

3:40 PM InvitedDeformation and Fracture Behavior of Metallic Glassy Alloys and Glassy-Crystal Composites: Dmitri Louzguine1; Alexei Vinogradov2; Alain Reza Yavari3; Guoqiang Xie4; Akihisa Inoue1; 1WPI-AIMR, Advanced Institute for Materials Research, Tohoku University; 2Department of Intelligent Materials Engineering, Faculty of Engineering; 3Institut National Polytechnique de Grenoble; 4Institute for Materials Research, Tohoku University,

4:00 PMEffects of Hydrogen on Structural and Mechanical Behavior of Zr-Based Bulk-Metallic Glasses: Chih-Pin Chuang1; Wojciech Dmowski1; Yun Liu2; Terry Udovic2; Yang Ren3; Peter Liaw1; Jaihung Huang4; 1University of Tennessee; 2NIST Center for Neutron Research; 3Advanced Photon Source, Argonne National Lab.; 4National TsingHua University

4:10 PM InvitedFlow and Fracture Studies on Bulk Metallic Glasses: John Lewandowski1; 1Case Western Reserve University

4:30 PMStructural Defects in Metallic Glass Structures as Shear Transformation Zones: Dan Miracle1; Garth Wilks2; Amanda Dahlman3; 1Air Force Research Laboratory; 2General Dynamics, Inc.; 3SOCHE

4:40 PM InvitedStructure of Ca-Mg-Zn Bulk Metallic Glasses: Oleg Senkov1; Daniel Miracle1; Emma Barney2; 1Air Force Research Laboratory; 2ISIS, Rutherford Appleton Laboratory

5:00 PMShear Bands Evolution in Cold-Rolled Bulk Metallic Glasses: Q.P. Cao1; J.W. Liu1; L.Y. Chen1; X.D. Wang1; Jianzhong Jiang1; 1International Center for New-Structured Materials (ICNSM)

5:10 PM InvitedSample Size Dependent Deformation in Amorphous Metals: Dominik Tönnies1; Cynthia Volkert1; 1University of Göttingen

5:30 PMUnderstanding Microstructure-Induced Ductility in Porous Bulk Metallic Glasses via Molecular Dynamics Simulations: Yunfeng Shi1; 1Rensselaer Polytechnic Institute

5:40 PMViscous Flow and Superplastic Deformation Behavior of Pt-, Pd- and Au-Based Bulk Metallic Glasses: Jinn Chu1; Yen-Chen Chen1; Jason Shian-Ching Jang2; Tsong-Ru Tsai3; Hidemi Kato4; 1National Taiwan University of Science and Technology; 2National Central University; 3National Taiwan Ocean University; 4Tohoku University

5:50 PMIndentation Size Effect of Bulk Metallic Glass: A New Observation: Jae-il Jang1; Byung-Gil Yoo1; Jun-Hak Oh1; Yong-Jae Kim1; 1Hanyang University

Characterization of Minerals, Metals and Materials: Characterization of Iron and Steel IISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Jian Li, CANMET-MTL; Jaroslaw Drelich, Michigan Technological University


2:05 PMMechanisms of Composite Agglomeration of Fluoric Iron Concentrates: You-ming Hu1; Qian Li1; Guang-hui Li1; Yong-bin Yang1; Yuan-bo Zhang1; Tao Jiang1; 1Central South University

2:30 PMOn Plastic Notch Effects in Quenched and Tempered Steels: Pasquale Russo Spena1; Donato Firrao1; Paolo Matteis1; 1Politecnico di Torino

2:50 PMCalculating Model Establishing and Application of Nitriding and Denitriding to 304 Stainless Steel in AOD: Chunfei Shen1; Qiao-lei Shi1; Yang Li2; Zhou-hua Jiang2; 1Baoshan Iron and Steel Co., LTD; 2Northeastern University

3:15 PMCyclic Deformation Behavior of a Medium Carbon Steel in the VHCF Range: Dietmar Eifler1; Michael Koster1; Guntram Wagner1; 1University of Kaiserslautern

3:40 PMMethods to Characterize Very Thin Passive Film Formed in SCW Corrosion Tests: Jian Li1; D. Guzonas2; Wenyue Zheng1; 1CANMET-MTL; 2Atomic Energy of Canada Limited

4:05 PMMechanical Properties of Heat Treated HSLA Bolt Steels: Hamed Fathi Doost1; Ali Nazari1; 1Islamic Azad University (Saveh Branch)

4:30 PMEffect of Stacking Fault Probability and ε Martensite on Damping Capacity of Fe-16%Mn-2% Si Alloy: Girish Bm1; Satish Bm2; K. Mahesh2; 1MVJ College of Engineering ; 2East Point College of Engineering and Technology


38

Technical Program

Mo

n. P

M

4:55 PMStudy of Pre-Strain Effect on Indentation Fracture Toughness of HSLA Steel Using Continuum Damage Mechanics: Sabita Ghosh1; Mita Tarafder1; Goutam Das1; Soumitra Tarafder1; 1National Metallurgical Laboratory

5:20 PMThe Influence of Different Heat Treatment Cycles on Controlled Surface Graphitization in CK45 Steel: Ali-Reza Kiani-Rashid1; Y Hamedi2; H.R. Shishegar2; 1Ferdowsi University of Mashhad; 2Sharif University of Technology


5:50 PM Question and Answer Period

Coatings for Structural, Biological, and Electronic Applications: Applications of Coatings ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS: Thin Films and Interfaces CommitteeProgram Organizers: Nuggehalli Ravindra, New Jersey Institute of Technology; Gregory Krumdick, Argonne National Laboratory; Roger Narayan, Univ of North Carolina & North Carolina State Univ; Choong-un Kim, University of Texas at Arlington; Nancy Michael, University of Texas at Arlington


Session Chair: Nancy Michael, University of Texas


2:10 PM InvitedA Load-based Depth-sensing Micro-Indentation Technique for Spallation Detection of Thermal Barrier Coatings: Bruce Kang1; Jared Tannenbaum1; Mary Anne Alvin2; 1West Virginia University; 2National Energy Technology Lab

2:40 PMTemperature and Scale Dependent Deformation and Creep Behavior of Polymer Derived Si-C-O Ceramics: Ming Gan1; Vikas Tomar1; 1Purdue University

3:05 PM Break

3:20 PM InvitedSurface Modification of Nanostructured Materials for Functional Medical Devices: Roger Narayan1; Nancy Monteiro-Riviere2; Robin Brigmon3; Michael Pellin4; Jeffrey Elam4; 1University of North Carolina & North Carolina State University; 2North Carolina State University; 3Savannah River National Laboratory; 4Argonne National Laboratory

3:50 PMPreparation of the Biomimetic Calcium Phosphate Coating on CoCrMo Implant Alloys via an Effective Chemical Activation: Luning Wang1; Jingli Luo1; 1University of Alberta

4:15 PM InvitedMolecular-Scale Surface and Interfacial Coatings Utilizing Self-Assembled Monolayer of Phosphonates (SAMP) Technology: Eric Bruner1; 1Aculon, Inc.

4:45 PMPiezoelectric Measurements and Microstructural Characterization of ‘Smart’ AlN Thin Films Fabricated by Pulsed Closed Field Unbalanced Magnetron Sputtering: Masood Hasheminiasari1; J. Lin1; J.J. Moore1; B. Mishra1; 1Colorado School of Mines

5:10 PMPlasma Spray Coatings for Aerospace Applications: David Koch1; D.M. Fell1; David Field1; 1Washington State University

5:35 PMUsing Artificial Neural Network to Optimize Thickness and Hardness of TiN Layers Deposited by PACVD Method: Mohammad Sadegh Mahdipoor1; Farzad Mahboubi1; Niloofar Kamkar Zahmatkesh1; Mahdi Raoufi1; 1Amir Kabir University

Computational Thermodynamics and Kinetics: Grain GrowthSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign



2:00 PM InvitedAbnormal Grain Growth in the Presence of a Static Particle Dispersion: Elizabeth Holm1; Todd Hoffmann1; Anthony Rollett2; Christopher Roberts2; 1Sandia National Laboratories; 2Carnegie Mellon University

2:30 PM InvitedEffect of Stresses on Grain Boundary Thermodynamics: Theory and Atomistic Simulations: T. Frolov1; Y. Mishin1; 1George Mason University

3:00 PMControlling Crystal Structure in Phase Field Crystal Modeling: Michael Greenwood1; Nikolas Provatas2; Joerg Rottler1; 1University of British Columbia; 2McMaster University

3:20 PM Break

3:30 PM InvitedMolecular Dynamics Simulation of Grain Growth in 3D Nanograined Ni: Stephen Foiles1; Elizabeth Holm1; 1Sandia National Laboratories

4:00 PM InvitedEvolving Microstructures in Lipid Bilayers: Novel Insights from Materials Science: Mikko Haataja1; 1Princeton University

4:30 PMTwinning Nucleation Mechanisms in Hexagonal-Close-Packed Crystals: Jian Wang1; John Hirth1; Carlos Tome1; 1LANL

4:50 PMPhase Field Modelling of Austenite Grain Growth in the Heat Affected Zone: Morteza Toloui1; Matthias Militzer1; 1UBC

5:10 PMAffinities for Grain Contacts in 3D Grain Growth: Burton Patterson1; Alan Sprague1; Veena Tikare2; Cristina Cardona3; Daniel Chappell1; Robert T. DeHoff4; 1University of Alabama at Birmingham; 2Sandia National Laboratories, New Mexico; 3San Diego State University; 4University of Florida

5:30 PMAtomistic Comparison of Volume-Dependent Melt Properties from Four Models of Aluminum: Chandler Becker1; Matthew Kramer2; 1Materials Science and Engineering Laboratory, National Institute of Standards and Technology; 2Materials and Engineering Physics, Ames Laboratory

39

Technical Program

Mo

n. P

M

Cost-Affordable Titanium III: Low Cost Materials and ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: F. H.(Sam) Froes, University of Idaho; M. Ashraf Imam, Naval Research Laboratory

2:00 PMApplications of the FFC Cambridge Process: Richard Dashwood1; Rohit Bhagat1; Ben Jackson2; Randhir Singh2; Peter Lee2; Douglas Inman2; David Dye2; Martin Jackson3; 1The University of Warwick; 2Imperial College London; 3The University of Sheffield

2:25 PMVery Low Cost Manufacturing of Titanium Alloy Components: James Withers1; R. Storm1; V. Shapovalov1; D. Myers1; R. Loutfy1; 1MER Corporation

2:50 PMDevelopment of High Strength Titanium Alloy Bar Stock from TiH2 Powder: Curt Lavender1; Elizabeth Stephens1; Eric Nyberg1; Vladimir Moxson2; Volodymr Duz2; 1Battelle - Pacific Northwest National Laboratory; 2ADMA Products Inc.

3:15 PMTitanium Reduction through Carbothermic Reduction and Molten Salt Electrolysis: Xiaohui Ning1; Chengjun Gao1; Shuqiang Jiao1; Hongmin Zhu1; 1University of Science and Technolgoy Beijing

3:40 PM Break

3:55 PMHigh Temperature Electrolysis of Ti and Its Alloys with a DC-ESR Unit: Toshihide Takenaka1; Hidetaka Matsuo1; Mitsuru Sugawara1; Akihiro Matsuyama1; Masahiro Kawakami1; 1Toyohashi University of Technology

4:20 PMDevelopment of Novel Alloying Techniques for Cost-Affordable Titanium: Peter Collins1; Santhosh Koduri2; John Sosa2; Hamish Fraser2; Jim Sears1; 1Quad Cities Manufacturing Lab; 2The Ohio State University

4:45 PMThermal Plasma Synthesis of Titanium Diboride: Muralidharan Ramachandran1; Sutham Niyomwas2; Ramana Reddy1; 1The University of Alabama; 2Prince of Songkla University

5:10 PMElectrochemical Productioin of Titanium from Oxycarbide Anodes: Ole Kjos1; Geir Haarberg1; Ana Martinez2; 1Norwegian University of Science and Technology; 2SINTEF Materials and Chemistry

Electrode Technology for Aluminum Production: Cathodes - Materials and OperationSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Manfred Banek, SGL Carbon GmbH


2:05 PMCarburation Phenomenons at the Cathode Block/Metal Interface: Martin Lebeuf1; Marc-André Coulombe1; Patrice Chartrand2; Benedicte Allard3; Gervais Soucy1; 1Université de Sherbrooke; 2École Polytechnique de Montréal; 3Carbone Savoie

2:25 PMErosion Measurements of High Density Cathode Block Samples through Laboratory Electrolysis with Rotation: Yoshinori Sato1; Pascal Lavoie2; Pretesh Patel3; 1SEC CARBON LTD.; 2Light Metals Research Center, University of Auckland; 3The Light Metals Research Centre, University of Auckland

2:45 PMThermo-Mechanical Characterisation of Graphitic and Graphitized Carbon Cathode Materials Used in Aluminium Electrolysis Cells: Donald Picard1; Wadii Bouzemmi1; Bénédicte Allard2; Houshang Alamdari1; Mario Fafard1; 1Aluminium Research Centre - REGAL; 2Carbone-Savoie

3:05 PMElectrical Resistance of Graphitic and Graphitized Cathode Materials at Elevated Temperatures: Jilai Xue1; Jun Zhu1; Yunxia Song1; 1Unversity of Science and Technology Beijing

3:25 PMDevelopment of High Density Graphitized Cathode Blocks for Aluminium Electrolysis Cells: Sten Yngve Larsen1; Xian-An Liao1; Hermann Gran1; Stian Madshus1; Johan Arnold Johansen1; 1Elkem Carbon AS

3:45 PM Break

4:00 PMSodium Diffusion in Cathode Lining in Aluminium Electrolysis Cells: Zhaohui Wang1; Jørn Rutlin2; Tor Grande1; 1Norwegian University of Science and Technology (NTNU); 2Norsk Hydro Aluminium AS

4:20 PMCharacterization of Sodium Expansion of Industrial Graphitic and Graphitized Cathodes: Jilai Xue1; Liancheng Wu2; Qingsheng Liu1; Qingren Niu2; Wei Wang1; Xin Hou2; Jun Zhu1; Hua He2; 1University of Science and Technology Beijing; 2Ningxia Qingtongxia Energy Aluminium Group, China Power Investment Corporation

4:40 PMElectrochemical Investigation of Potassium Intercalation into Graphite: Dongren Liu1; Wangxing Li2; Zhanhong Yang1; Shilin Qiu2; Yingtao Luo2; 1Central South university; 2Zhengzhou Research Institute of Chalco

5:00 PMCorrosion Resistance of Cathode to NaF-KF-ALF3-Based Electrolyte: Hengwei Yan1; Wangxin Li2; Shilin Qiu2; Ji Li1; 1Central South University; 2Zhengzhou Research Institute of Chalco

5:20 PMDevelopment Status of Processing Technology for Spent Potlining in China: Xiping Chen1; 1Zhengzhou Research Institute of Chalco

Electrometallurgy - General Session: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Aqueous Processing CommitteeProgram Organizer: Michael Free, University of Utah


Session Chair: Michael Free, University of Utah

2:00 PMA Sandwich Structure Lead-Based Composite Porous Anode for Zinc Electrowinning: Jiang Liangxing1; Lv Xiaojun1; Lai Yanqing1; Li Jie1; Liu Yexiang1; 1Central South University


40

Technical Program

Mo

n. P

M

2:25 PMConstant and Pulse Voltage Applications in CaWO4 Reduction: Orhan Goksu1; Ishak Karakaya1; Metehan Erdogan1; 1Middle East Technical University

2:50 PMElectrochemical Formation of Mg–Li-Y Alloys at Solid Magnesium Electrode from LiCl–KCl –YCl3 Melts: Pengkai Wang1; Huimin Lu1; Feng Shi1; 1Beihang University

3:15 PMElectrochemistry of Tantalum Pentachloride in the Room Temperature Ionic Liquid 1-Butyl-3-Methy Imidazolium Hexafluorophosphate: Xiaoxiang Zhang1; Huimin Lu1; Tao Zhang1; 1Beihang University

3:40 PM Break

3:50 PMZrB2 Produced with Molten Salt Electrolysis: Selda Özkan1; Servet Timur1; Mustafa Urgen1; 1ITU Metallurgical and Materials Engineering Department

4:15 PMEffects of Ultrasound on Cell Voltage of Aluminum Electrolysis in Cryolite-Alumina Melts: Jilai Xue1; Shao Hua1; Jun Zhu1; 1University of Science and Technology Beijing

4:40 PMEvaluation of the Corrosion Behavior of Laser Welded and GTAW Welded Austenitic Stainless Steel 316L in Lithium Bromide and Comparing the Inhibition Effect of Chromate, Bromate and Molybdate on the Corrosion Behavior of Austenitic Stainless Steel 316L in Lithium Bromide: Ahmad Momtaz1; 1German University in Cairo

Failure of Small-Scale Structures: Deformation and Failure Sponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Marian Kennedy, Clemson Univeristy; Brad Boyce, Sandia National Laboratory; Reinhold Dauskardt, Stanford; Zhiwei Shan, Hysitron Inc


Session Chair: Reinhold Dauskardt, Stanford University

2:00 PM InvitedSIZE MATTERS: Nano-Scale Mechanical Properties of Single Crystals, Nanocrystalline Metals, and Amorphous Metallic Glasses: Julia Greer1; Ju-Young Kim1; Dongchan Jang1; Michael Burek2; 1California Institute of Technology; 2University of Waterloo

2:25 PMThe Role of Grain Boundaries in the Creep of Sub-Micrometer Thick Cu and Cu/Si3N4 Microbeams at 300 K: Robert Klassen1; Yong Liu2; 1The University of Western Ontario; 2Eaton Corporation

2:40 PM InvitedCompeting Roles of Deformation and Void Formation during Rapid Thermal Cycling of Metal Interconnects: Robert Keller1; David Read1; Roy Geiss1; 1NIST

3:05 PMVisualization of Failure Mechanisms in Nanocrystalline Thin Films: Krishna Jonnalagadda1; John Sharon1; Kevin Hemker1; Kaliat Ramesh1; 1Johns Hopkins University

3:20 PMTuning the Mechanical Properties of a Nanoporous Gold: Hai-Jun Jin1; Lilia Kurmanaeva1; Jörg Weissmüller1; 1Forschungszentrum Karlsruhe GmbH

3:35 PM Break

3:50 PM InvitedFailure of Protein Materials in Extreme Conditions and Disease: Markus Buehler1; 1Massachusetts Institute of Technology

4:15 PMDeformation and Fracture in Human Skin: Kemal Levi1; Victoria Hsiao1; Ruiliang Jia1; Reinhold Dauskardt1; 1Stanford University

4:30 PM InvitedSize Dependent Deformation in Polymers - Experiments and Theory: Chung-Souk Han1; 1North Dakota State University

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Innovations in Casting TechnologiesSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Chris Woodward, AFRL-RX; John Miller, TBD

2:00 PM InvitedAdvances in the Solidification of Single Crystal Superalloys: Tresa Pollock1; Clinique Brundidge1; Jonathan Madison1; Jonathan Miller2; 1University of Michigan; 2Air Force Research Laboratory

2:30 PMDirect Digital Manufacturing of Airfoils: Suman Das1; John Halloran2; Wil Baker3; 1Georgia Institute of Technology; 2University of Michigan; 3Honeywell Aerospace

2:50 PMExperimental and Mathematical Modeling Progress on Scanning Laser Epitaxy: A Technique for Growing Single Crystal Superalloys: Michael Kirka1; Rohan Bansal1; Suman Das1; 1Woodruff School of Mechanical Engineering, Georgia Institute of Technology

3:10 PMModeling of Grain Selection during Directional Solidification of Superalloy Single Crystal Turbine Blade Casting: Dong Pan1; Qingyan Xu1; Baicheng Liu1; Jiarong Li2; Hailong Yuan2; Haipeng Jin2; 1Tsinghua University; 2Beijing Institute of Aeronautical Materials

3:30 PM Break

3:50 PMPrediction of As-Cast Grain Size Distribution from a Model of Equiaxed Solidification with Free Dendrite Transport: Wajira Mirihanage1; David Browne1; 1University College Dublin

4:10 PMDamage Tolerant Cast Alloy Ti-5Al-5Mo-5V-3Cr for Aerospace Applications: Edward Chen1; L.W. Weihmuller2; D.R. Bice1; G.D. Hall2; W.A. Thomas2; 1Transition45 Technologies, Inc.; 2Bell Helicopter Textron

4:30 PMCoupling Computational Thermodynamics with Experimental Study for Accelerated Development of Mo-Si-B Based Alloys: Ying Yang1; Hongbin Bei2; Easo George2; Jaimie Tiley3; Y. Chang4; 1CompuTherm LLC; 2Oak Ridge National Laboratory; 3Air Force Research Laboratory; 4University of Wisconsin-Madison

4:50 PMMechanical Properties of TiAl-Based Alloys for High Temperature Applications: Fereshteh Ebrahimi1; Michael Kesler1; Sonalika Goyel1; Orlando Rios1; Damian Cupid2; Hans Seifert2; 1University of Florida; 2Freiberg University of Mining and Technology

41

Technical Program

Mo

n. P

M

5:10 PMDevelopment of Ni-Mn-Based Braze Alloys for the Fast Epitaxial Braze Repair of Wide Cracks in Single-Crystalline Nickel-Base Superalloys: Britta Laux1; Joachim Rösler1; 1Technische Universität Braunschweig

Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids: Simulation IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Rainer Schmid-Fetzer, Clausthal University of Technology; Heike Emmerich, RWTH Aachen University; Frans Spaepen, Harvard University; Martin Glicksman, University of Florida; John Perepezko, University of Wisconsin, Madison


Session Chairs: Dieter Herlach, DLR; Martin Glicksman, University of Florida

2:00 PM InvitedHeterogeneous Nucleation as a Deterministic Process: A. Greer1; 1University of Cambridge

2:25 PMHeterogeneous Nucleation on Spherical and Flat Catalysing Surfaces: Ma Qian1; 1The University of Queensland

2:45 PMA Phase-Field Simulation Study on Heterogeneous Nucleation in Ti-Al-B Alloys: Janin Eiken1; Victor Witusiewicz1; Ulrike Hecht1; Markus Apel1; 1Access e. V.

3:05 PMA Precipitate Growth Model Based on a Variational Approach: Qiang Du1; Warren Poole1; Mary Wells2; 1University of British Columbia; 2University of Waterloo

3:25 PMEffect of Local Stress on Nucleation and Variant Selection during Solid-State Transformation with Symmetry Reduction: Rongpei Shi1; Ning Zhou1; Yunzhi Wang1; 1Ohio State University

3:45 PM Break

4:05 PM InvitedPhase-Field Crystal Modeling of Nucleation, Patterning, and Early-Stage Growth in Colloidal Systems in Two and Three Dimensions: Laszlo Granasy1; Gyorgy Tegze1; Gyula Toth1; Frigyes Podmaniczky1; Tamas Pusztai1; 1Research Institute for Solid State Physics and Optics

4:30 PMNucleation and Successive Microstructure Evolution via Phasefield and Phasefield Crystal Method: Heike Emmerich1; Ricardo Siquieri1; 1RWTH Aachen

4:50 PMAb Initio Determination of Phase-Field Parameters Needed for Scale-Bridging Studies of Nucleation and Microstructure Formation in the Ti-Fe Eutectic System: Martin Friak1; Juergen Hubert2; Heike Emmerich2; Antje Schlieter3; Uta Kuehn3; Juergen Eckert3; Joerg Neugebauer1; 1Max Planck Institute for Iron Research; 2RWTH Aachen University; 3Institute for Complex Materials at the Leibniz-Institute for Solid State and Materials Research

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



2:00 PM InvitedHigh Energy X-Ray Scattering Studies of Ordering and Phase Separation in Binary Metallic Alloys: Harald Reichert1; 1ESRF

2:30 PM InvitedPhase Separation in Al(Sc)-Based Alloys on a Nanoscale: David Seidman1; David Dunand1; 1Norhwestern University

3:00 PMFirst-Principles Cluster Expansions for Predicting Surface Reconstructions: Wei Chen1; Chris Wolverton1; William Schneider2; 1Northwestern University; 2University of Notre Dame

3:20 PMEffects of Temperature and Chemical Order on Phonons in Fe-V Alloys: Jorge Munoz1; Matthew Lucas2; Brent Fultz1; 1California Institute of Technology; 2Oak Ridge National Laboratory

3:40 PM Break

4:10 PM InvitedModeling Ni-C Alloys to Study the Growth of Carbon Nanotubes and Graphene Sheets: François Ducastelle1; Hakim Amara1; Christophe Bichara2; 1LEM CNRS-ONERA; 2CINaM-CNRS

4:40 PMEquilibria among RNCoin2+3n Phases (R= La, Ce, Dy) Having HoNCoga2+3n Structures: Randal Newhouse1; Gary Collins1; 1Washington State University

5:00 PMFirst Principles Shape Memory Alloy Design: Ni-Ti-X (Pt, Pd) Ternary Systems: Nicholas Hatcher1; Oleg Kontsevoi1; Arthur Freeman1; 1Northwestern University

5:20 PMGamma-Gamma’ Interfacial Free Energy through In-Silico Nucleation Experiments: Stefano Angioletti-Uberti1; Mark Asta2; Christopher Woodward3; Axel van de Walle4; Peter Lee1; Mike Finnis1; 1Imperial College London; 2University of California Davis; 3Air Force Research Laboratory; 4California Institute of Technology

5:40 PMMulti-Scale Modeling of Martensite Formation in Fe-Based Solid Solutions: Alexander Udyansky1; Johann von Pezold1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung GmbH


42

Technical Program

Mo

n. P

M

International Symposium on High-Temperature Metallurgical Processing: Ceramics and IntermetallicsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Pyrometallurgy CommitteeProgram Organizers: Jaroslaw Drelich, Michigan Technological University; Jiann-Yang Hwang, Michigan Technological University; Tao Jiang, Central South University; Jerome Downey, Montana Tech


Session Chair: Jerome Downey, Montana Tech

2:00 PM KeynoteProcess Development: Challenges and Driving Forces for Change: Karl Forwald1; 1Elkem AS Solar

2:40 PMGlass Coating for Iron-Based Powder Metallurgy Components: Adele Garkida1; Jiann-Yang Hwang2; Xiaodi Huang2; Allison Hein2; Zhiwei Peng2; 1Ahmadu Bello University; 2Michigan Technological University

3:00 PMThermodynamic Measurement of Al2O3-B2O3 System by Double Knudsen Cell Mass Spectrometry: Takashi Nagai1; Masafumi Maeda1; 1The University of Tokyo

3:20 PMBonite - A New Raw Material Alternative for Silica-Free High Strength Aluminum Metal Refractories: Dale Zacherl1; Andreas Buhr2; Dagmar Schmidtmeier2; Robert McConnell1; 1Almatis, Inc; 2Almatis GmbH

3:40 PM Break

3:55 PMOn Line Monitoring and Process Parameters Estimation of Multiple Passes Laser Phase Transformation Hardening by Using High-Power Direct Diode Laser: Soundarapandian Santhanakrishnan1; Radovan Kovacevic1; 1Southern Methodist University

4:15 PMPhase Transformation of Andalusite-Mullite and Its Fiber Reinforcement to Refractory Ceramics: Bowen Li1; Jiann-Yang Hwang1; Wayne Bell1; 1Michigan Technological University

4:35 PMThermodynamic Measurement of Rare Earth Metal Systems by Knudsen Cell Mass Spectrometry: Sho Shirai1; Takashi Nagai1; Masafumi Maeda1; 1Institute of Industrial Science, University of Tokyo

4:55 PMA Technique to Measure Heat of Reaction in TiB2 Reinforced Intermetallic Matrix Composites: Andrew Baker1; S.L. Kampe1; Tony Zahrah2; 1Michigan Tech; 2Matsys, Inc

5:15 PMMicrowave Synthesis of Nano-Boron Carbide Powder: Liang Hu1; Huimin Lu1; Yi Liu1; 1Beihang University

Jim Evans Honorary Symposium: Cast Shop Aluminum Production Joint Session: Flow and Solidification Phenomena in Nonferrous CastingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Lifeng Zhang, Missouri University of Science and Technology


2:10 PMCoupled Multi-Physics Modeling of Continuous Casting of Steel and DC Casting of Aluminum: Philippe Thevoz1; Olivier Ludwig1; Marco Aloe1; 1Calcom ESI

2:35 PMMetal Flow and Heat Transfer in Wagstaff® Rapidfill™ Metal Distribution Systems for Billet Dc Casting: Bin Zhang1; 1Wagstaff Inc

3:00 PMThermal-Fluid-Compositional Model of Electron Beam Casting of Ti-6Al-4V: Riley Shuster1; Daan Maijer1; Steven Cockcroft1; Tao Meng1; Denis Favez1; David Tripp2; Stephen Fox3; 1The University of British Columbia; 2TIMET Morgantown; 3TIMET Henderson

3:25 PMThe Effect of SF6 on the Surface Tension of AZ91D Magnesium Alloy: Steven Roach1; Hani Henein2; 1Vale INCO Ltd.; 2University of Alberta

3:50 PM Break

4:05 PMApplication of Computational Fluid Flow and Experimentations to Improve Horizontal Casting Process Performance at Rio Tinto Alcan: André Larouche1; 1Rio Tinto Alcan

4:30 PMDC Casting of Aluminum Alloys — Importance of Mold Boundary Conditions: Amir Baserinia1; Harry Ng1; David Weckman1; Mary Wells1; 1University of Waterloo

4:55 PMMeasurement of As-Cast Residual Stresses in an Aluminium Alloy AA6063 Billet Using Neutron Diffraction: Jean-Marie Drezet1; Alexander Evans2; Christophe Jaquerod3; André Phillion1; 1Ecole Polytechnique Federale Lausanne; 2Paul Scherrer Institut, Villigen; 3Alcan Aluminium Valais, Sierre

43

Technical Program

Mo

n. P

M

Magnesium Technology 2010: ICME I (Integrated Computational Materials Engineering)Sponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: John Allison, Ford Motor Company; Alan Luo, General Motors Corporation

2:00 PMIntegrated Computational Materials Engineering (ICME) for Magnesium: An International Pilot Project: John Allison1; Baicheng Liu2; Kevin Boyle3; Lou Hector4; Robert McCune5; 1Ford Motor Company; 2Tsinghua University; 3CanMET Materials Technology Laboratory; 4General Motors R&D Center; 5Robert C. McCune and Associates

2:20 PM KeynoteThermodynamic and Elastic Properties of La-X (X=Al,Mg) Intermetallic Compounds from First Principles Calculations: Louis Hector Jr1; Jan Wrobel2; Krzysztof Kurzydlowski2; 1GM R&D Center; 2Warsaw University of Technology

2:50 PMNumerical Simulation of Direct Extrusion of Magnesium Alloys: Wojciech Misiolek1; Luigi DePari1; 1Lehigh University

3:10 PM KeynoteOn Modeling the Extrusion Process of Magnesium Alloys: Esteban Marin1; Stephen Horstemeyer1; Clemence Bouvard1; Douglas Bammann1; Haitham El Kadiri1; Paul Wang1; 1Mississippi State University

3:40 PM Break

4:00 PMTransmutation and Accommodation Effects by Glide Twinning: Andrew Oppedal1; Haitham El Kadiri1; 1Mississippi State University

4:20 PMPlasticity in a Rod-Textured Extruded Mg AM30 Alloy: Q. Ma1; H. El Kadiri1; 1Mississippi State University

4:40 PMEffect of Grain-Matrix Interaction Stiffness on Slip System Hardening Parameters of a Viscoplastic Self-Consistent Polycrystal Model: Babak Raeisinia1; Sean Agnew1; 1University of Virginia

5:00 PMExtracting Post-Uniform Constitutive Behavior from High Temperature Tensile Test Data: Cyrus Dreyer1; Louis Hector1; Sean Agnew1; 1University of Virgina

5:20 PMStrain Field Measurement during Bending of Extruded Magnesium Alloys: Adi Ben-Artzy1; Louis Hector2; Paul Krajewski2; 1Rotem Ind. ; 2GM

5:40 PMCyberinfrastructure for Integrated Computational Material Engineering: Tomasz Haupt1; 1Mississippi State University

Magnesium Technology 2010: Primary Production and Flammability IssuesSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Neale Neelameggham, US Magnesium LLC; Adam Powell, Opennovation

2:00 PMThe Magnesium Industry Today: A Global Perspective: Greg Patzer1; 1International Magnesium Association

2:20 PMMagnesium: Bridging Diverse Metal Markets: Susan Slade1; 1US Magnesium LLC

2:40 PMDevelopment of Recyclable Mg-Based Alloys: Nathan Reade1; Jerry Sokolowski1; Adam Gesing2; Carsten Blawert3; Daniel Fechner3; Norbert Hort3; 1University of Windsor; 2GCI; 3GKSS

3:00 PMPreparation of Al-Mg Alloys from MgO by Molten Salt Electrolysis Method: Sh Yang1; Fl Yang1; Xianwei Hu2; Zhaowen Wang2; Zhongning Shi2; Bingliang Gao2; 1Jiangxi University of Science and Technology; 2Northeastern University

3:20 PMEffect of KCl on Conductivity of BaF2-LiF-MgF2 Molten Salts: Sh Yang1; Fl Yang1; Guocheng Wang1; Xianwei Hu2; Zhaowen Wang2; Zhongning Shi2; Bingliang Gao2; 1Jiangxi University of Science and Technology; 2Northeastern University

3:40 PMPowder Metallurgy of Magnesium: Is it Feasible?: Paul Burke1; Georges Kipouros1; 1Dalhousie University

4:00 PM Break

4:20 PMFireproof Evaluation of CaO Added Mg-3Al, Mg-6Al, and Mg-9Al Mg Cast Products: Jin-Kyu Lee1; Shae K. Kim1; 1Korea Institute of Industrial Technology

4:40 PMEffect of Ca(OH)2 on Oxidation and Ignition Resistances of Pure Mg: Dong-In Jang1; Shae K. Kim1; 1Korea Institute of Industrial Technology

5:00 PMResearch on the Oxidation Behavior of AZ91D-Based Magnesium Alloys: Hongjie Luo1; 1Northeastern University

5:20 PMLow-Cost Zero-Emission Primary Magnesium Production by Solid Oxide Membrane (SOM) Electrolysis: Adam Powell1; Uday Pal2; Steve Derezinski1; 1Metal Oxygen Separation Technologies, Inc.; 2Boston University

5:40 PMCorrosion Resistance of Graphite Anode for Magnesium Electrolyzers: Bing Li1; Jingwei Lou1; Can Zhan1; Jianguo Yu1; 1East China University of Science and Technology


44

Technical Program

Mo

n. P

M

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: Materials for Clean Coal Power and CCS Systems IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: David Alman, National Energy Technology Laboratory; Bruce Pint, Oak Ridge National Laboratory

2:00 PM InvitedCompeting Fatigue Failure Modes in Structural Alloys and the Implications for Life-Management Approaches: Michael Caton1; S. K. Jha2; J. M. Larsen1; 1US Air Force Research Laboratory; 2Universal Technology Corporation

2:40 PM InvitedAddressing Materials Processing Issues for USC Steam Turbines: Cast Versions of Wrought Ni-Based Superalloys: Paul Jablonski1; Christopher Cowen1; Phillip Maziasz2; Neal Evans2; Yuki Yamamoto2; 1National Energy Technology Laboratory; 2Oak Ridge National Laboratory

3:20 PMAssessing Cast Alloys for Use in Advanced Ultra-Supercritical Steam Turbines: Neal Evans1; Yukinori Yamamoto2; Philip Maziasz2; Paul Jablonski3; 1University of Tennessee, Knoxville; 2Oak Ridge National Laboratory; 3National Energy Technology Laboratory

3:40 PM Break

3:50 PM InvitedHigh Temperature Corrosion of Fe-Cr, Fe-Al, Fe-Si and Fe-Si-Al Alloys in CO2-H2O Gases: David Young1; Jianqiang Zhang1; Thomas Gheno1; Huan Li1; 1University of New South Wales

4:30 PMPhase Stability of Cast and Wrought IN 740 at Ultra Supercritical Boiler Temperatures: Christopher Cowen1; Paul Jablonski1; Xingbo Liu2; 1United States Department of Energy; 2West Virginia University

4:50 PMDevelopment of Friction Stir Welding Technology for Coal and Nuclear Power Applications: K. Scott Weil1; Glenn Grant1; Yuri Hovanski1; Curt Lavender1; Jens Darsell1; 1Pacific Northwest National Lab

5:10 PMInteraction of Mechanical Performance and Environmental Compatibility: Sebastien Dryepondt1; Bruce Pint1; 1Oak Ridge National Laboratory

Materials Processing Fundamentals: Deformation Processing and Heat TreatmentSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Process Technology and Modeling CommitteeProgram Organizer: Prince Anyalebechi, Grand Valley State University



2:00 PMMechanical Properties and Their Dependence on Microstructure in Hot-Rolled 3rd Generation Advanced High Strength Steels: Meghan McGrath1; Dave Van Aken1; Von Richards1; 1Missouri University of Science and Technology

2:20 PMInfluence of Direct Aged Treatment on Creep Behaviors of Hot Continuous Rolling GH4169 Superalloy: Sugui Tian1; Zhenrong Li1; Zhonggang Zhao1; Liqing Chen2; Xianghua Liu2; 1Shenyang University of Technology; 2Northeast University

2:40 PMThe Effect of Carburizing on the Fatigue Life of 4130 Steel: Roselita Fragoudakis1; Anil Saigal1; 1Tufts University

3:00 PMCast and Wrought Tensile Properties of a 2nd Generation Advanced High Strength Steel (AHSS): Tracy Frick1; Dave Van Aken1; Ryan Howell1; 1Missouri University of Science and Technology

3:20 PM Break

3:40 PMMicrostructure and Mechanical Properties of Multiphase Steel after Quenching and Partitioning: Thomas Rieger1; Oliver Buelters2; Jian Bian3; 1Department of Ferrous Metallurgy, RWTH Aachen University; 2Institute for Metal Forming, RWTH Aachen University; 3ThyssenKruppSteel

4:00 PMAg Exudation during Internal Oxidation in Various Contact Materials: Gunther Schimmel1; Bernd Kempf2; Markus Rettenmayr1; 1Friedrich-Schiller-University Jena; 2Umicore AG & Co. KG

4:20 PMEffects of Phosphorous on the Precipitation Kinetics of κ-carbides in the Fe-30%Mn-9%Al-1%Si-0.9%C-0.5%Mo Alloy System: Laura Bartlett1; David Van Aken1; Kent Peaslee1; Ryan Howell2; 1Missouri University of Science and Technology; 2Army Research Lab

4:40 PMA Study on Heat Transfer Coefficient Distribution in High Pressure Hydrogen Quenching: Bowang Xiao1; Gang Wang1; Yiming Rong1; 1Worcester Polytechnic Institute (WPI)

5:00 PMEvolution of Graphite Phase Morphology during Graphitization Process in Hypereutectoid Steels: Amin Rounaghi1; Payam Shayesteh1; Ali-Reza Kiani-Rashid1; 1Ferdowsi University

45

Technical Program

Mo

n. P

M

Mechanical Performance for Current and Next-Generation Nuclear Reactors: Ensuring Lifetime and ReliabilitySponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Dylan Morris, NIST; Greg Oberson, Nuclear Regulatory Commission; Nicholas Barbosa, National Institute of Standards and Technology; Wolfgang Hoffelner, Paul Scherrer Institute


Session Chairs: Greg Oberson, U.S. Nuclear Regulatory Commission; Matthew Kerr, US Nuclear Regulatory Commission

2:00 PM InvitedEnsuring the Performance of Nuclear Reactor Pressure Vessels for Long Time Service: Randy Nanstad1; 1Oak Ridge National Laboratory

2:30 PM InvitedExperience of the Fossil Industry with the Creep-Strength Enhanced Ferritic Steels: Jeffrey Henry1; 1Energy Solutions Group

3:00 PMComparative Plant Performance of Stabilized and Non-Stabilized Austenitic Stainless Steels: Raul Rebak1; 1GE Global Research

3:20 PMEffects of Common Alloying Additions on Solidification Cracking of Zirconium Alloys: Micah Hackett1; George Young1; 1KAPL

3:40 PMEffect of Neutron Radiation Exposure on Low Cycle Fatigue of 304SS: Korukonda Murty1; Indrajit Charit2; 1North Carolina State University; 2University of Idaho

4:00 PM Break

4:15 PM InvitedWhen the Turtle Can’t Get There and the Rabbit Gets Lost: Predicting Low Flux High Fluence RPV Embrittlement: G. Robert Odette1; Takuya Yamamoto1; 1University of California, Santa Barbara

4:45 PM InvitedMaterials Issues Potentially Impacting Long-Term Safe Operations: C. E. Carpenter1; 1U.S. Nuclear Regulatory Commission

5:15 PM InvitedSafety Evaluation Challenges for NGNP VHTR Materials of Construction and Components: Makuteswara Srinivasan1; Amy Hull1; Shah Malik1; 1U.S. Nuclear Regulatory Commission

5:45 PMGen IV Materials (ASME-DOE Project): James Ramirez1; 1ASME

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Plasticity and Strength of Nanostructured and Nanoscale Materials IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Jian Wang, LANL; Edmund Webb, Sandia National Laboratories

2:00 PM InvitedDiscrete Dislocation Modeling of the Relaxation of Intrinsic Stress in Thin Films: Can Ayas1; Erik Van der Giessen1; 1University of Groningen

2:30 PMA Further Step in Understanding the Plastisity Size-Dependency: 3D Modelling of Solid and Annular Micropillars: Jaafar El-Awady1; Satish Rao2; Christopher Woodward3; Dennis Dimiduk3; 1AFRL/UTC; 2AFRL/UES; 3AFRL

2:50 PMModeling the Statistics of Yield Behavior in Nanopillar Compression and Nanoindentation: James Morris1; Hongbin Bei1; George Pharr2; Easo George1; 1Oak Ridge National Laboratory; 2University of Tennessee

3:10 PM InvitedModeling the Mechanical Properties of Gum Metal: Daryl Chrzan1; Matthew Sherburne1; Yuranan Hanlumyuang1; Tianshu Li2; J. W. Morris, Jr.1; 1University of California, Berkeley; 2University of California, Davis

3:40 PM Break

4:00 PMTensile Deformation of Gold Nanowires: Structural Transitions during Elongation and Breaking Mechanisms: Francesca Tavazza1; Lyle Levine1; Anne Chaka1; 1National Institute of Standards and Technology

4:20 PMAtomic-Scale Analysis of the Mechanical Behavior of Gold Nanofoams: Kedarnath Kolluri1; Michael Demkowicz1; 1Massachusetts Institute of Technology

4:40 PMMolecular Dynamics Simulations of Uniaxial Compression of Silicon Nanoparticles: Lucas Hale1; William Gerberich1; Roberto Ballarini1; Neville Moody2; Xiaowang Zhou2; Jonathan Zimmerman2; 1University of Minnesota; 2Sandia National Laboratories

5:00 PMReaction Rate Theory Prediction of Dislocation Nucleation in Aluminum at Room Temperature: Linh Nguyen1; Derek Warner1; 1Cornell University


46

Technical Program

Mo

n. P

M

Neutron and X-Ray Studies of Advanced Materials III: 2D Materials Science from DiffractionSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Karen Pantleon, Denmark Technical University; Carol Thomson, NIU

2:00 PM KeynoteIn Situ X-Ray Scattering Studies of the Polarization Structure of Ultrathin Ferroelectric Films: Gregory Stephenson1; Matthew Highland1; Dillon Fong1; Timothy Fister1; Paul Fuoss1; Jeffrey Eastman1; Stephen Streiffer1; Carol Thompson2; 1Argonne National Laboratory; 2Northern Illinois University

2:30 PM InvitedNucleation, Coarsening, and Coalescence during Layer-by Layer Growth via Pulsed Laser Deposition: Time-Resolved, Diffuse X-Ray Scattering Studies: Joel Brock1; John Ferguson1; Hui-Qiong Wang1; Arthur Woll1; 1Cornell University

2:50 PM InvitedThe Growth and Formation of Nanostructures at Surfaces: In Situ X-Ray Scattering Studies: Paul Miceli1; Shawn Hayden1; Michael Gramlich1; Chinkyo Kim2; Edward Conrad3; 1University of Missouri-Columbia; 2Kyunghee University; 3Georgia Institute of Technology

3:10 PM InvitedTime-Resolved X-Ray Studies of Materials Processing at Surfaces and Interfaces - Present and Future: Carol Thompson1; 1Northern Illinois University

3:30 PM InvitedTwo-Dimensional X-Ray Diffraction for Advanced Materials Analysis: Bob He1; 1Bruker AXS

3:50 PM InvitedIn-Situ X-Ray Diffraction Studies of Microstructure Evolution in Electrodeposits at Room Temperature and Elevated Temperatures: Karen Pantleon1; 1Technical University of Denmark

4:10 PM Break

4:20 PM InvitedStrain Profiling in Group-III-Nitride Based Multilayer Systems on Silicon: Alois Krost1; Rainer Clos1; Juergen Blaesing1; 1Otto-von-Guericke University Magdeburg

4:40 PM InvitedReal Time Reciprocal Space Mapping of Nano-Islands Induced by Quantum Confinement: Hawoong Hong1; Aaron Gray2; T.-C. Chianng2; 1Argonne National Lab; 2University of Illinois at Urbana-Champaign

5:00 PMDependence of the Preferred Growth Directions of GaN Nanorods on Polytypism: Sanghwa Lee1; Yuri Sohn1; Chinkyo Kim1; Dong Ryeol Lee2; Hyun-Hwi Lee3; 1Kyung Hee University; 2Soongsil University; 3Pohang Accelerator Lab

5:15 PMRoentgenograhic Determination of Residual Stresses in Carbonitrided Layers: Angel Zumbilev1; Iliya Zumbilev1; 1Technical University of Sofia, Plovdiv Branch

5:25 PM InvitedHigh-Energy X-Ray Measurements of Layered Systems for Energy Applications: Jonathan Almer1; Di-Jia Liu2; B. Harder3; K. Faber3; 1Argonne National Laboratory, X-Ray Science Division; 2Argonne National Laboratory, Chemical Technology Division; 3Northwestern University, Materials Science and Engineering Department

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Mechanical Behavior, Failure ModeSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: Laura Turbini, Research In Motion; Jenq-Gong Duh, National Tsing Hua University

2:00 PMEffects of POSS on Impact Behavior of Thermomechanically Fatigued Lead-Free Solder Joints: Takayuki Kobayashi1; Andre Lee1; K.N. Subramanian1; 1Michigan State University

2:15 PMInfluence of Interface Reaction on Out–of–Plane Displacements during Thermal Cycling of Copper–Silicon Bond with an Indium Interlayer: Daniel Gruber1; Nagaraj Chelliah Machavallavan1; Jia Liu2; Indranath Dutta2; Rishi Raj1; 1University of Colorado; 2Washington State University

2:30 PMThe Fracture Behavior of Aged Sn-Ag-Cu Solder Joints during High-Strain Rate Loading: Taehoon You1; Heylim Choi1; Eunsik Kim2; Jungtak Moon2; Heeman Choi1; 1Kookmin University; 2MK Electron

2:45 PMSynchrotron Microdiffraction Study of Localized Stress and Surface Evolution in Sn-Cu System: Nitin Jadhav1; Eric Buchovecky1; Wenjun Liu2; Jon Tischler3; Gene Ice3; Allan Bower1; Eric Chason1; 1Brown University; 2Argonne National Laboratory; 3Oak Ridge National Lab

3:00 PMEffect of Zn-Containing Flux on the Joint Strength and Microstructure of Sn-3.5Ag Soldering on an Electroless Ni-Au Surface Finish: Hitoshi Sakurai1; Youichi Kukimoto2; Katsuaki Suganuma1; 1Osaka University; 2Harima Chemicals, Inc.

3:15 PM Break

3:30 PMElectrochemical Corrosion Behavior of HighTemperature Pb-Free Solders: Chi-Hang Tsai1; Jenn-Ming Song1; 1National Dong Hwa University

3:45 PMJoint Strength Enhancement by CNT Inserted Sn3.5Ag Solder Balls: Young-Ki Ko1; Yoon-Ki Sa1; Jung-Hwan Bang1; Jeong-Han Kim1; Chang-Woo Lee1; Sehoon Yoo1; 1KITECH/Micro-Joining Center

4:00 PMIntermetallic Compounds and Mechanical Properties of Sn-3Ag-0.5Cu and Sn-1Ag-0.5Cu-0.06Ni-0.01Ge Solder Ball Grid Array Packages with ENIG Surface Finish: Chin-Liang Chen1; Jim Wang2; Tung-Han Chuang1; 1National Taiwan University; 2SHENMAO Technology Inc.

47

Technical Program

Mo

n. P

M

4:15 PMInternal Strain Evolution during Thermal Cycling in a Row of Lead-Free Solder Joints in a Flip Chip Ball Grid Array Package: Bite Zhou1; Thomas Bieler1; Guilin Wu2; Stefan Zaefferer2; Tae-Kyu Lee3; Kuo-Chuan Liu3; 1Michigan State University; 2Max-Planck Institut für Eisenforschung; 3Cisco Systems, Inc.

4:30 PMMechanical Shock of Environmentally-Benign Pb-Free Solders: Kyle Yazzie1; Huiyang Fei1; Jason Williams1; Dallas Kingsbury1; Hanqing Jiang1; Pedro Peralta1; Nik Chawla1; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering

4:45 PMFatigue-Creep Interaction Damage Theory Based Thermal Fatigue Life Prediction Model for SnAgCu Solder Joints: Yan Chang1; Li Yan1; Liu Na1; 1Beijing University of Technology

Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials IX: Session IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases CommitteeProgram Organizers: Chih-ming Chen, National Chung Hsing University; Srinivas Chada, Medtronic; Sinn-wen Chen, National Tsing-Hua University; Hans Flandorfer, University of Vienna; A. Lindsay Greer, University of Cambridge; Jae-ho Lee, Hongik University; Kejun Zeng, Texas Instruments; Yee-wen Yen, National Taiwan University of Science and Technology; Wojciech Gierlotka, AGH University of Science and Technology; Chao-hong Wang, National Chung Cheng University


Session Chairs: Jae-Ho Lee, Hongik University; Chao-hong Wang, National Chung Cheng University

2:00 PM InvitedInterfacial Reactions in the Sn-Co/Ni and Sn-Cu-Co/Ni Couples: Yu-kai Chen1; Sinn-wen Chen1; 1National Tsing Hua University

2:25 PMInterfacial Reactions of Co/Sn/Cu Sandwich Structure: Chao-hong Wang1; Chun-yi Kuo1; 1National Chung Cheng University

2:45 PMEffects of Mechanically Applied Stress on Solid-State Sn/Cu Interfacial Reaction: Chi-pu Lin1; Chih-ming Chen1; 1National Chung-Hsing University

3:05 PMStress Effect Study on Sn-Cu Intermetallic Formation by Four Point Bending Method: Chuo-Cheng Yang1; Ya-Chi Cheng1; Chi-Jia Tong1; Ming Tzer Lin1; 1National Chung Hsing University

3:25 PMCorrelation between Solder Wettability and Surface Properties of Deformed Cu Foils: Yu-Hsiang Hsiao1; Chengyi Liu1; 1National Central University

3:45 PM Break

4:05 PM InvitedSuppressing the Sn-Patch Growth in Ti/Ni(V)/Cu under Bump Metallization with Snagcu Solder after Aging: Kai-Jheng Wang1; Jenq-Gong Duh1; 1National Tsing Hua University

4:30 PMInterfacial Reactions of Sn-0.7Cu�Sn-9Zn and Sn-58Bi Lead-Free Solders with the Au/Ni/SUS304 Substrate: Yee-wen Yen1; Kuen-da Chen1; Wei-kai Liou1; 1National Taiwan University of Science and Technology

4:50 PMInfluence of Palladium Thickness on the Solderability between Sn3Ag0.5Cu and Au/Pd/Ni(P) Surface Finish: Wei-Hsiang Wu1; S. P. Peng1; C. H. Lin1; C. E. Ho1; 1Yuan Ze University

5:10 PMElectroless Nickel Plating on Porous Medium: So-Young Chun1; Young-Mok Rhym2; Jae-Ho Lee1; 1Hongik University; 2Korea Institute of Materials Science

Processing Materials for Properties: Agglomerates and Composite Materials ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: David Olson, Colorado School of Mines; Greg Oberson, U.S. Nuclear Regulatory Commission

2:00 PM KeynoteInnovations in Processing of Lightweight Metal Matrix Composites: Ramana Reddy1; 1The University of Alabama

2:30 PMSurface Peening Morphology Evaluation in Anodized Aluminum Alloy Rotors: M. Bilal Khan1; 1SCME NUST

2:50 PMProcessing of Mullite and Mullite-Zirconia Composites Via Microwave Sintering: Subhadip Bodhak1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

3:10 PMSHS Synthesized Aluminum-Titanium Carbide MMC Die Casting Alloys: William Garrett1; Cosan Unuvar1; John Moore1; 1Colorado School of Mines

3:30 PMCompaction Behavior of Aggregated and Agglomerated Nano-Powder Using Discrete Element Method: Avinash Balakrishnan1; Christophe Martin1; 1Grenoble-INP

3:50 PMEffects of Particle Size, Deformation and Heat Treatment Processing on Strength and Ductility of Aluminum-Iron Composite: Samson Adeosun1; Sanmbo Balogun1; Fidelia Ochulor1; Wasiu Ayoola1; Olatunde Sekunowo1; 1University of Lagos, Akoka

4:10 PMFeatures of a Structure and Properties of the Agglomerates Obtained from Rich Ores: Sereda Borys1; Irina Kruglyak1; Aleksandr Zherebtsov1; 1ZSEA

4:30 PMIn situ Neutron Diffraction Study of Solvent-Free Fabrication of Ferromagnetic Core-Shell Fe3O4-Carbon Nanocomposite: Sven Vogel1; Vilas Pol2; Luke Daemen1; George Chertkov1; 1Los Alamos National Laboratory; 2Argonne National Laboratory

4:50 PMThermal Properties of Advanced Diamond - Metal Matrix Composites: Vikas Sinha1; Jessica Remmert2; Sabyasachi Ganguli3; Robert Wheeler1; Jonathan Spowart4; 1UES, Inc.; 2UTC; 3UDRI; 4Air Force Research Laboratory

5:10 PMEffect of Proess Parameters on Powering Characteristics of Galavnneald Materials: Ram Janam Singh1; Khursid Khan2; Shantanu Chakrabarti2; 1NIT Jamshedpur; 2Tata Steel


48

Technical Program

Mo

n. P

M

5:30 PMPorous Superelastic NiTi Produced by Sintering with NaCl Space-Holders: Ampika Bansiddhi1; David Dunand2; 1Kasetsart University; 2Northwestern University

5:50 PMExperimental Investigations of the Ti-Fe- Eutectic System Needed for the Further Understanding of the Microstructural Evolution in an Eutectic Alloy at Different Cooling Rates: Antje Schlieter1; Uta Kühn1; Martin Friak2; Juergen Hubert3; Heike Emmerich3; Joerg Neugebauer2; Juergen Eckert1; 1IFW Dresden; 2MPI Düsseldorf; 3RWTH AAchen

Refractory Metals 2010: Processing and Properties IISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Refractory Metals CommitteeProgram Organizers: Brian Cockeram, Bechtel-Bettis; Gary Rozak, H.C. Stark

Monday PM Room: 2AFebruary 15, 2010 Location: Washington State Convention Center

Session Chairs: Brian Cockeram, Bechtel Marine Propulsion Corporation; Gary Rozak, H. C. Starck, Inc.

2:00 PMTantalum Plates with Controlled Texture: Dincer Bozkaya1; Peter Jepson1; 1H.C. Starck Inc.

2:25 PMAnalysis of Tantalum Taylor Impact Specimens: Joel House1; John Bingert2; Philip Flater1; James O’Brien3; William Hosford4; Robert DeAngelis5; Richard Harris1; 1Air Force Research Laboratory; 2Los Alamos National Laboratories; 3O’Brien and Associates; 4University of Michigan; 5University of Florida

2:50 PMComparison of Optimized Finite Element Crystal Plasticity Model and Tensile Tests of Niobium Single Crystals: Derek Baars1; Payam Darbandi1; Chris Compton2; Wenjun Liu3; Rozaliya Barabash4; Thomas Bieler1; 1Michigan State University; 2National Superconducting Cyclotron Laboratory; 3Advanced Photon Source Argonne National Laboratory; 4Oak Ridge National Laboratory

3:15 PMDeformation Mechanism for Polycrystal Niobium at Cryogenic Temperature: Payam Darbandi1; Derek Baars2; Saravan Chandrasekaran3; Farhang Pourboghrat3; Tom Bieler2; Chris Compton4; 1Michigan State University; 2Department of Chemical Engineering and Materials Science, Michigan State University; 3Department of Mechanical Engineering, Michigan State University; 4National Superconducting Cyclotron Laboratory, Michigan State University

3:40 PM Break

3:55 PMMechanical Properties and Constitutive Modeling of Some Refractory Metals: Shuh Rong Chen1; G.T. (Rusty) Gray III1; 1Los Alamos National Laboratory

4:20 PMChromium Alloys for More Efficient Fossil Energy Conversion Technologies: Omer Dogan1; Michael Gao1; Paul King1; 1DOE National Energy Technology Laboratory

4:45 PMStrength and Oxidation Resistance of Mo-Si-B Alloys Produced by Reaction Synthesis: Michael Middlemas1; Joe Cochran1; P. Jain2; K. S. Kumar2; 1Georgia Institute of Technology; 2Brown University

5:10 PMCyclic Deformation Behavior of Commercially Pure Mo and a Mo-Si-B Solid Solution Alloy: X Yu1; K.S. Kumar1; 1Brown University

5:35 PMTensile Creep of Mo-Si-B Alloys: P. Jain1; Sharvan Kumar1; 1Brown University

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Thermodynamics and Morphological StabilitySponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chairs: Douglas Medlin, Sandia National Labs; Wayne Kaplan, Technion - Israel Institute of Technology

2:00 PM InvitedGamma/Gamma Prime Interfacial Free Energies in Nickel-Based Alloys: Atom-Probe Tomographic Experiments and First-Principles Calculations: David Seidman1; 1Northwestern University

2:30 PMAtomic Scale Characterization of Deformation Induced Interfacial Mixing in a Nanostructured Cu/V Composite Wire: Xavier Sauvage1; Cécile Genevois1; Gérald Da Costa1; Victor Pantsyrny2; 1University of Rouen, CNRS; 2Bochvar Institute of Inorganic Materials

2:50 PMHeterogeneous Nucleation of Nisi2 Epitaxial Growth in Si Nanowires: Yi-Chia Chou1; Wen-Wei Wu2; Lih J. Chen3; K. N. Tu1; 1University of California Los Angeles; 2National Chiao Tung University; 3National Tsing Hua University

3:10 PMMetastability and Competition in Grain Boundary Complexion Transitions: Shen Dillon1; Gregory Rohrer2; 1University of Illinois at Urbana-Champaign; 2Carnegie Mellon University

3:30 PMInfluence of Grain Boundary Chemistries in Mix-Mobility Thin Film Growth: Bianzhu Fu1; Gregory Thompson1; 1University of Alabama

3:50 PM Break

4:10 PM InvitedThermodynamics of Solid-Fluid Interfaces with Non-Hydrostatically Stressed Solids: T. Frolov1; Y. Mishin1; 1George Mason University

4:40 PMGrain Boundary Misorientation Instabilities: W. Craig Carter1; 1MIT

5:00 PMOn the Thermodynamic Stabilization of Defects in the Framework of a Defactant Concept: Reiner Kirchheim1; 1University of Göttingen

5:20 PMInterfacial Structure and Morphological Evolution of Platinum Nano-Precipitates Embedded in Sapphire: Melissa Santala1; Velimir Radmilovic2; Raquel Guilian3; Mark Ridgway3; Andreas Glaeser1; Ronald Gronsky1; 1University of California; 2National Center for Electron Microscopy; 3Australian National University

49

Technical Program

Mo

n. P

M

Surface Engineering for Amorphous-, Nanocrystalline-, and Bio-Materials: Session IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS: Surface Engineering CommitteeProgram Organizers: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International Univesity; Sudipta Seal, University of Central Florida; Narendra Dahotre, University of Tennessee


Session Chairs: Arvind Agarwal, Florida International University; Roger Narayan, North Carolina State University; Narendra Dahotre, University of Tennessee


2:05 PM InvitedAssessment of Microbial Biofilm Growth on Nanocrystalline Diamond Coatings Using a CDC Biofilm Reactor: J. S. Lewis1; S. D. Gittard1; Roger Narayan1; C. J. Berry2; Robin Brigmon2; R. Ramamurti3; R. N. Singh3; 1University of North Carolina & North Carolina State University; 2Savannah River National Laboratory; 3University of Cincinnati

2:30 PMWetting Behavior of Laser Synthetic Surface Micro Textures on Ti-6Al-4V for Bioapplication: Sameer Paital1; Wei He1; Claus Daniel2; Narendra Dahotre1; 1The University of Tennessee; 2Oak Ridge National Laboratory

2:50 PMCorrosion of the Implant Alloy Ti-45wt.%Nb in Simulated Physical Media: Daniela Zander1; 1TU Dortmund

3:10 PMCorrosion Behaviour Evaluation of Fluoridated Hydroxyapatite/Niobium Filler-Matrix Composite Coating for Hard Tissue Implant: Ehsan Mohammadi Zahrani1; M. H. Fathi2; Akram Alfantazi1; 1The University of British Columbia; 2Isfahan University of Technology

3:30 PMSurface Engineering of Titanium Alloy Modified by Plasma-Based Low-Energy Ion Implantation: M.K. Lei1; Z.L. Wu1; Y.X. Ou1; T.K. Song1; Q. Zhou1; 1Dalian University of Technology

3:50 PM Break

4:05 PMSurface Nitriding of Ti-6Al-4V for Bio-Implant Application: Jyotsna Dutta Majumdar1; 1Indian Institute of Technology Kharagpur

4:25 PMNanostructured Bio-Scaffold for Bone Implants, Stents: A Biomedical Evolution: Shampa Aich1; Chandra Shekhar1; Mrinal Mishra1; 1Indian Institute of Technology

4:45 PMThe Effect of Processing Parameters on Surface Properties of Ti6Al7Nb Alloys: Mert Günyüz1; Murat Baydogan1; Huseyin Cimenoglu1; Eyup Sabri Kayali1; 1Istanbul Technical University

5:05 PMElectrodeposition of Hydroxyapatite on Magnesium for Biodegradable Implant Applications: Satendra Kumar1; M. Jamseh1; Sankara Narayanan TSN1; 1National Metallurgical Laboratory, Madras Centre

5:25 PMFabrication and Characterization of Tio2 Films on Ti-6Al-4V by Anodic Oxidation: Maria Vera1; Alicia Ares1; Mario Rosenberger1; Diego Lamas2; Carlos Schvezov1; 1CONICET-UNaM; 2CONICET-CITEDEF

5:45 PMEffect of Laser Surface Treatment on Tribological Behavior and Bioactivity of ASTM F-75 Cobalt Base Alloy: J.L. Davila1; F. Cepeda Rodriguez1; M.F. Trejo Aguirre1; 1Corporación Mexicana De Investigación En Materiales

Sustainable Materials Processing and Production: Motivating Sustainability ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Monday PM Room: 2BFebruary 15, 2010 Location: Washington State Convention Center

Session Chairs: Markus Reuter, Ausmelt Ltd.; Iver Anderson, Ames Laboratory

2:00 PM Introductory Comments by Iver Anderson

2:10 PM PlenaryA Framework and a New Paradigm for Sustainable Materials Development and Engineering: The Status Quo is not Sustainable!: Diran Apelian1; 1Worcester Polytechnic Institute

2:35 PM PlenaryThe Sustainable Organization: Fostering the Capacity for Change: Leith Sharp1; 1Harvard University

3:00 PM PlenaryBuilding a Sustainability Strategy into a Consumer Products Business: Leon H. Bruner1; Peter White1; 1The Procter & Gamble Company

3:25 PM PlenaryPracticing Informed Substitution of Restricted Materials in Electronic Products: Knowing Whether Replacements are Better for the Environment and Human Health: Helen Holder1; 1Hewlett-Packard Company

3:50 PM Break

4:05 PM Plenary Sustainability, a Strategic Opportunity for Umicore: Mark Caffarey1; 1Umicore, USA

4:30 PM PlenaryTitle Not Available: John Allison1; 1Ford

4:55 PM Plenary Energy (to be confirmed)

5:20 PM Concluding Comments by Markus Reuter


50

Technical Program

Mo

n. P

M

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Computational Materials Science IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, Univ of Groningen


Session Chairs: David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; David Pettifor, University of Oxford

2:00 PM InvitedAtomic Level Stresses: Takeshi Egami1; 1University of Tennessee

2:25 PM InvitedMolybdenum at High Pressure and Temperature: Melting from Another Solid Phase: Shao-Ping Chen1; Leonid Burakovsky1; A. B. Belonoshko2; 1Los Alamos National Laboratory; 2The Royal Institute of Technology

2:50 PM InvitedAnalytic Bond-Order Potentials Including Magnetism: Ralf Drautz1; David Pettifor2; 1Ruhr-Universität Bochum; 2University of Oxford

3:15 PM InvitedIrradiated Point Defects in bcc Transition Metals and Alloys: A Multi-Scale Modeling Review: Duc Nguyen-Manh1; 1UKAEA

3:40 PM Break

4:05 PM InvitedDeformations in Nanosized Metallic Glass Systems: Jeff De Hosson1; C. Chen1; Y. Pei1; Vasek Ocelik1; Dave Matthews1; 1University of Groningen

4:30 PM InvitedRecent Advances and Ongoing Challenges in Accelerated Molecular Dynamics Methods: Arthur Voter1; 1Los Alamos National Laboratory

4:55 PM InvitedBond-Order Potential for Iron: Matous Mrovec1; Duc Nguyen-Manh2; Christian Elsaesser1; Peter Gumbsch1; David Pettifor3; 1Fraunhofer Institute for Mechanics of Materials; 2EURATOM/UKAEA Fusion Association; 3Oxford University

5:20 PMCore Structure and Kinks of Screw Dislocations in Fe and W from First-Principles: Lisa Ventelon1; François Willaime1; Emmanuel Clouet1; Mihai-Cosmin Marinica1; 1CEA

5:35 PMCore Traction Contribution to the Elastic Energy of a Dislocation: Emmanuel Clouet1; 1CEA Saclay

5:50 PMAb Initio Study of Extreme Loading Conditions in Transition-Metal Disilicides with the C40 Structure: Martin Friak1; Dominik Legut2; Mojmir Sob3; 1Max Planck Institute for Iron Research; 2Institute of Physics of Materials, Academy of Sciences of the Czech Republic; 3Faculty of Science, Masaryk University

6:05 PMModeling the Synergetic Interactions between Creep and the Growth of Thermal Scales: David Wilkinson1; Somaradi Khiev1; Andi Limarga2; 1McMaster University; 2Harvard University

Three-Dimensional Materials Science VI: Processing and Analysis of Large 3D DatasetsSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: Jeff Simmons, U S Air Force Research Laboratory; Marc De Graef, Carnegie Mellon University

2:00 PM InvitedArchival Storage of Three-Dimensional Data: Mike Jackson1; Jeff Simmons2; Marc De Graef3; 1Bluequartz Software; 2Air Force Research Laboratory; 3Carnegie Mellon University

2:30 PMData Fusion by Means of Mutual Information and Image Entropy: Begum Gulsoy1; Jeff Simmons2; Marc De Graef1; 1Carnegie Mellon Unversity; 2Air Force Research Laboratory

2:50 PMUsing Moment Invariants to Assess the Realism of Digitally Constructed Microstructures: Patrick Callahan1; Mike Groeber2; Marc De Graef1; 1Carnegie Mellon University; 2AFRL/UTC

3:10 PM Break

3:30 PM InvitedAcquisition and Analysis of Gigabyte-Scale Tomographic Spectral Images: Paul Kotula1; Lysle Serna1; 1Sandia National Laboratories

4:00 PMApplication of Novel Techniques to the Three-Dimensional Characterization of Microstructural Features in Alpha+Beta Titanium Alloys: John Sosa1; Santhosh Koduri1; Vikas Dixit1; Peter Collins1; Hamish Fraser1; 1The Ohio State University

4:20 PMPrior Information for Segmentation of Large Serial Section Image Datasets: Jeff Simmons1; Mary Comer2; Ilya Pollak2; Marc De Graef3; 1AFRL; 2Purdue University; 3Carnegie Mellon University

4:40 PMCharacterization of Complex Three-Dimensional Interconnected Microstructures via the Level-Set Method: Victor Chan1; Katsuyo Thornton1; 1University of Michigan, Ann Arbor

5:00 PMProcessing of 3D Data Sets from X-Ray Micro-Tomography of Impulse Atomized Powders: Denise Thornton1; Jon Johansson1; Arash Ilbagi1; Hani Henein1; 1University of Alberta

51

Technical Program

Mo

n. P

M

Ultrafine Grained Materials – Sixth International Symposium: Mechanical ResponseSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Josef Zrnik, Comtes FHT Ltd.; Jingtao Wang, Nanjing University of Science and Technology; Buyang Cao, Johns Hopkins University; Y.G. Ko, Yeungnam University

2:00 PMDeformation Behavior during Tensile Straining of Nano/Ultrafine-Grained Structures Formed by Reversion in Metastable Austenitic Steels: Pavan Venkatasurya1; Venkata Ramuni1; Sachin Mali1; Jinesh Shah1; Sashank Nayak1; Devesh Misra1; Mahesh Somani2; Penti Karjalainen2; 1University of Louisiana; 2University of Oulu

2:15 PMDeformation Behavior of Nanocrystalline Pd-10 At.% Au Alloy Investigated in Compression Mode at Different Temperatures: Lilia Kurmanaeva1; Yulia Ivanisenko1; Elena Tabachnikova2; Hans-Jörg Fecht3; 1Institute für Nanotechnologie, Forschungszentrum Karlsruhe; 2B. Verkin Institute for Low Temperatures Physics and Engineering, National Academy of Science of Ukraine; 3Institute of Micro and Nanomaterials

2:30 PM InvitedFatigue Behavior of Highly Nanotwinned Copper: Carla Shute1; Benjamin Myers1; Sujing Xie1; Troy Barbee2; Andrea Hodge3; Julia Weertman1; 1Northwestern University; 2Lawrence Livermore National Laboratory; 3University of Southern California

2:50 PMInfluence of Stacking Fault Energy on Microstructures and Mechanical Properties of fcc Metals by Equal Channel Angular Pressing: Yue Zhang1; Jing Tao Wang1; Jin Qiang Liu1; 1Nanjing University of Science and Technology

3:05 PMMicrostructure and Tensile Properties of Ultrafine Grained, TRIP-Aided Low-Carbon Steel: Young Gun Ko1; C.W. Lee2; S. Namgung2; D.H. Shin2; 1Yeungnam University; 2Hanyang University

3:20 PMUltra-High Strength Aluminum Nanocomposites: Julie Schoenung1; 1University of California, Davis

3:40 PM Break

3:55 PM InvitedGrain Size Effects on Rate Sensitivity of FCC Metals: K. Ramesh1; Emily Huskins1; Buyang Cao1; 1Johns Hopkins University

4:15 PMMicrostructures and Mechanical Properties of Ultrafine Grained Medium Carbon Steel Processed By HPT at Increased Temperature: Jozef Zrnik1; Reinhard Pippan2; Stephan Scheriau2; Libor Kraus1; 1Comtes FHT Ltd.; 2Austrian Academy of Sciences

4:30 PMMechanical Evaluation of Heavily Drawn Fe-Ni-Mn Martensitic Steel: Hadi Ghasemi-Nanesa1; Mahmoud Nili Ahmadabadi1; Hassan Shirazi1; 1University of Tehran

4:45 PM InvitedMechanical Properties of Nanocrystalline Tantalum within a Wide Range of Strain Rates: Zhiliang Pan1; Weihua Yin1; Xiaolei Wu2; Brian Schuster3; Laszlo Kecskes3; Qiuming Wei1; 1University of North Carolina at Charlotte; 2Institute of Mechanics, CAS; 3US Army Research Lab

5:05 PMDeformation Twinning in High-Strain-Rate Sheared Nanocrystalline Aluminum: Buyang Cao1; Bin Li1; Nitin Daphalapurkar1; En Ma1; K. Ramesh1; 1The Johns Hopkins University

5:20 PMMethods for Improving Ductility in Nanostructured Titanium Prepared via Powder Metallurgical Routes: Osman Ertorer1; Troy Topping1; Ying Li1; Yonghao Zhao1; Wes Moss2; Enrique Lavernia1; 1University of California - Davis; 2Toyota Racing Development

5:35 PMStrain Rate Sensitivity of Ultrafine Grained Boron Carbide Reinforced Aluminum Metal Matrix Composites: Rustin Vogt1; Zhihui Zhang1; Troy Topping1; Enrique Lavernia1; Julie Schoenung1; 1University of California, Davis

Ultrafine Grained Materials – Sixth International Symposium: Processing TechnologiesSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: M. Ravi Shankar, University of Pittsburgh; Sergey Dobatkin, A.A. Baikov Institute of Metallurgy and Materials Science of RAS; Gencaga Purcek, Karadeniz Technical University; Deliang Zhang, The University of Waikato

2:00 PM InvitedA New Biaxial Extrusion Method to Create Sheets of Ultrafine Grain Size: Amit Ghosh1; Rick Lee1; 1University of Michigan

2:20 PMIdeal Engineering Materials by High Rate Severe Plastic Deformation: M. Ravi Shankar1; Shashank Shekhar1; Jiazhao Cai1; 1University of Pittsburgh

2:35 PMMechanical and Dry Sliding Wear Behavior of Ultrafine-Grained AISI1024 Steel Processed Using Multi Axial Forging: Aditya Padap1; Gajanan Chaudhari1; S.K. Nath1; 1IIT Roorkee

2:50 PM InvitedNanostructured Materials by Mechanical Alloying: New Results on Property Enhancement: Carl Koch1; Ronald Scattergood1; Khaled Youssef1; Ethan Chan1; Yuntian Zhu1; 1North Carolina State University

3:10 PMMicrostructure and Mechanical Properties of IF-Steel Sheets after Equal-Channel Angular Sheet Extrusion (ECASE) and Subsequent Annealing: Gencaga Purcek1; Onur Saray1; Ibrahim Karaman2; 1Karadeniz Technical University; 2Texas A&M University

3:25 PMSevere Plastic Deformation of a Pearlitic Steel by Wire Drawing: Reiner Kirchheim1; Shoji Goto1; Christine Borchers1; 1University of Göttingen


52

Technical Program

Mo

n. P

M

3:40 PM Break

3:55 PM InvitedStrength-Ductility Combination of Nanostructured 316L Stainless Steel Processed by Means of Dynamic Plastic Deformation (DPD): G.Z. Liu1; N.R. Tao1; K. Lu1; 1SYNL, Institute of Metal Res. CAS

4:15 PMStructure, Texture, and Mechanical Properties of Copper and a Mg-Al-Zn-Mn Alloy after Constrained Groove Pressing: Sergey Dobatkin1; Vladimir Serebryany1; Jozef Zrnik2; 1A.A. Baikov Institute of Metallurgy and Materials Science of RAS; 2COMTES FHT

4:30 PMImprovement of Strength and Wear Resistance of Cp-Ti by ECAE and MAO Processes: Akgun Alsaran1; Gencaga Purcek1; Yenal Vangolu1; Onur Saray1; 1Ataturk University

4:45 PM InvitedSevere Plastic Deformation Processes for Thin Samples: Rimma Lapovok1; Arnaud Pougis2; Dmitry Orlov1; Laszlo Toth3; Yuri Estrin4; 1Monash University; 2CSIRO; 3Université Paul Verlaine-Metz; 4Monash University / CSIRO

5:05 PMTailoring Materials Properties of Aluminium Alloys by Sandwich-like Structures with Accumulative Roll Bonding: Tina Hausöl1; Heinz Werner Höppel1; Mathias Göken1; 1Friedrich-Alexander-University Erlangen-Nürnberg

5:20 PMComparison of the Mechanical Properties for Equally Strained Ultrafine Grained Al 99.5 Produced by Accumulative Roll Bonding and Equal Channel Angular Pressing: Andreas Böhner1; Verena Maier2; Heinz Höppel1; Mathias Göken1; 1University of Erlangen-Nuernberg; 2ZMP

5:35 PMSynthesis of Bulk Nanostructured and Ultrafine Structured Metallic Materials by Thermomechanical Consolidation of Nanostructured Powders: Deliang Zhang1; Aamir Mukhter1; Amro Gazawi1; Vijay Nadakuduru1; 1The University of Waikato

5:50 PMPreliminary Investigation of Novel Micro-Scale Current Activated Tip-Based Sintering (µ-CATS): A. El-Desouky1; S. Chang1; S. Kassegne1; K. Moon1; K. Morsi1; 1San Diego State University

53

Technical Program

Tue.

AM

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Synthesis of Nanomaterials ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Tuesday AM Room: 214February 16, 2010 Location: Washington State Convention Center

Session Chair: Navin Manjooran, Siemens AG; Jud Ready, Georgia Tech


8:35 AM InvitedOxide Nanostructures: Synthesis, Characterization and Properties Evaluation: Avanish Srivastava1; 1National Physical Laboratory

8:55 AMEffect of Processing Parameters on the Physical, Thermal, and Combustion Properties of Plasma-Synthesized Metallic Nanopowders: Chris Haines1; Darold Martin1; Joseph Paras1; Ryan Carpenter1; Deepak Kapoor1; 1US Army ARDEC

9:15 AMSynthesis and Characterization of Single Crystalline Metal Nanowire Rings: Yongjie Zhan1; Hao Lu1; Yang Lu1; Cheng Peng1; Jiangnan Zhang1; Jun Lou1; 1Rice University

9:35 AMSpontaneous Growth of Novel Hexagonal Mn Nanowhiskers from Hydrogen Activated Laves Phase Alloys: Erdong Wu1; Xiumei Guo1; Wuhui Li1; 1Institute of Metal Research, Chinese Academy of Science

9:55 AMGeometry Dependence of the Strain-Driven Self-Rolling of Semiconductor Nanotubes: Ik Su Chun1; Huan Li1; Archana Challa1; K. Jimmy Hsia1; Xiuling Li1; 1University of Illinois at Urbana-Champaign

10:15 AM Break

10:30 AMMesoscale Simulations of Self-Assembly of Arbitrarily-Shaped Particles in Bulk and at Fluid-Fluid Interfaces: Paul Millett1; Yu Wang2; 1Idaho National Laboratory; 2Michigan Tech

10:50 AMMorphological Evolution and Coarsening Process of a Strained Heteroepitaxial Thin Film during Constant Deposition: Solmaz Torabi1; Steve Wise2; Peng Zhou1; John Lowengrub1; 1University of California Irvine; 2University of Tennessee, Knoxville

11:10 AMDevelopment and Characterization of Nanoporous Carbon Coated ZnO Powders Prepared by Pyrolysis of Spray Dried ZnO-PVA Mixtures: Burak Özkal1; Seyma Duman1; Osamu Yamamoto2; 1ITU; 2Akita University

11:30 AMLow-Temperature Synthesis of NiFe2O4 Spinel Nanopowder via Solid-State Reactions: Zhigang Zhang1; Guangchun Yao1; Jia Ma1; Zhongsheng Hua1; Lei Wang1; 1Northeastern University


Advances in Composite, Cellular and Natural Materials: Metal FoamsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: Antonia Antoniou, Georgia Institute of Technology; Ki-Ju Kang, Chonnam National University

8:30 AMFabrication of Ti-6Al-4V Open-Cellular Foams by Additive Manufacturing Using Electron Beam Melting: L. Murr1; S. Gaytan1; F. Medina1; E. Martinez1; L. Martinez1; R. Wicker1; 1University of Texas at El Paso

8:50 AMCompression-Compression Fatigue of LENS-Processed Cellular Titanium: Nikolas Hrabe1; B. Vamsi Krishna2; Amit Bandyopadhyay2; Rajendra Bordia1; 1University of Washington; 2Washington State University

9:10 AMProperties of Energetic Materials Reinforced by Open-Cell Metal Foams: Dmitriy Kiselkov1; Ravil Yakushev1; 1Institute of Technical Chemistry

9:30 AMMicrostructural Characterization of PORVAIR Metal Foams: S. Raj1; Jacob Kerr2; 1NASA Glenn Research Center; 2Pennsylvania State University

9:50 AMFormation and Disappearance of Crack-Like Pores for Al Foams Made by PM Route: Lei Wang1; Guangchun Yao1; Xiaoming Zhang1; Yihan Liu1; Jia Ma1; 1Northeastern University

10:10 AM Break

10:30 AMOpen Celled Bulk Metallic Glass Foam Using Eqaul Channel Angular Pressing: Marie Cox1; David Dunand1; Suveen Mathaudhu2; 1Northwestern University; 2U.S. Army Research Laboratory

10:50 AMMechanical Damping Properties of Al-Si Closed-Cell Aluminum Foam: Yong Liang Mu1; Guang Chun Yao1; Hong Jie Luo1; 1Northeasten University

11:10 AMSound Absorption of Closed-Cell Aluminum Foam Fabricated by Melt Foaming Route: Lisi Liang1; Yongliang Mu1; Lei Wang1; Zhongsheng Hua1; Jia Ma1; Guangchun Yao1; 1Institute of Materials and Metallurgy, Northeastern University

11:30 AMStudy on Compressive Properties of Aluminum Foams Reinforced with Short Copper-Coated Carbon Fibers: Jinjing Du1; Guangchun Yao1; Zhuokun Cao1; 1Northeasten University

11:50 AMThe Influence of Cell Shape Anisotropy on the Compressive Property of Closed-Cell Al-Si Alloy Foam: Yong Liang Mu1; Guan Chun Yao1; 1Northeastern University


54

Technical Program

Tue.

AM

Alumina and Bauxite: Bayer Process Chemistry and Alumina Quality IISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Pat Clement, Alcoa - Point Comfort Operations


8:40 AMSegregation of Alumina – The Challenge for the Aluminium Industry: Andreas Wolf1; Peter Hilgraf1; 1Claudius Peters Projects GmbH

9:10 AMUnique High-Temperature Facility for Studying Organic Reactions in the Bayer Process: Allan Costine1; Joanne Loh1; Robbie McDonald1; Greg Power1; 1CSIRO Minerals

9:40 AM Break

10:00 AMTechnology Solutions to Increase Alumina Recovery from Aluminogoethitic Bauxites: Andrey Panov1; Alexander Suss1; Alexander Fedyaev1; 1RUSAL VAMI

10:30 AMNew Polymers for Improved Flocculation of High DSP-Containing Muds: Matthew Davis1; Qi Dai1; H.-L. Tony Chen1; Matthew Taylor1; 1Cytec Industries

11:00 AMSome Aspects of Tricalcium Aluminate Hexahydrate Formation on the Bayer Process: Silvia Franca1; Paulo Braga1; Jorge Aldi Lima2; Juarez Moraes2; Americo Borges2; 1CETEM; 2Alunorte

Aluminum Alloys: Fabrication, Characterization and Applications: Processing and TextureSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: Tongguang Zhai, University of Kentucky

8:30 AMConcurrent Precipitation in Continuous Cast Al Alloys: Q. Zeng1; Tongguang Zhai1; 1University of Kentucky

8:50 AMCharacterization of Novel Microstructures in Al-Ag-Cu Ternary Eutectic: Amber Genau1; Lorenz Ratke1; Markus Köhler1; 1German Aerospace Center

9:10 AMEvaluation of Process Speed Effect in Aluminium Extrusion by Experiment and Simulations: Barbara Reggiani1; Lorenzo Donati1; Luca Tomesani1; 1University of Bologna

9:30 AMProcessing of Forgings with Fine Crystalline Structure out of Commercial Aluminum Alloys: Vadim Trifonov1; 1Institute for Metals Superplasticity Problems, Russian Academy of Sciences

9:50 AM Break

10:05 AMGrowth Morphology of Eutectic under Unidirectional Solidification in Al-13%Si Alloys Containing Strontium and Magnesium: Hengcheng Liao1; Wanru Huang1; Shengqing Wu1; Mingdong Cai2; Qigui Wang3; 1Southeast University; 2Exova - Houston Laboratory; 3Advanced Materials Engineering, GM Powertrain

10:25 AMInfluence of Cold Rolling and Equal-Channel Angular Extrusion on the Microstructural and Mechanical Behaviors of Al-40Zn Alloy: Gencaga Purcek1; Onur Saray1; Ibrahim Karaman2; 1Karadeniz Technical University; 2Texas A&M University

10:45 AMExperimental Investigations on Influence of Process Parameters on Weld Strength of Friction Stir Welded Aluminium Alloy: Krishnaiah Arkanti1; Syed Yousuful Haq2; 1Osmania University; 2Steel Authority of India Limited

11:05 AMOptimization of Baking Hardening of Al 5052 Sheet by a Response Surface Method: Atiye Nekahi1; Kamran Dehghani1; Mohammad Ali Mohammad Mirzaie2; Niloofar Kamkar Zahmatkesh1; 1Amirkabir University of Technology; 2Modares University

11:25 AMOrientation Distribution Plots in a Cold-Rolled Heat-Treated Specimen of Aluminum Alloy 6061: Samuel Adedokun1; Victor Ojo2; 1University of Lagos, Akoka-Yaba, Lagos, Nigeria; 2Ladoke Akintola University of Technology

11:45 AMComparison of Textures and Microstructures between AA3XXX Hot Bands from Three Different Casting Processes: Xiyu Wen1; Yansheng Liu2; Ningileri Shridas2; Tongguang Zhai1; Zhong Li3; 1University of Kentucky; 2Secat, Inc.; 3Aleris International Inc.

Aluminum Reduction Technology: Hall-Héroult Cell: TechnologySponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chair: Alton Tabereaux, Consultant


8:35 AMDevelopment of the AP39: The New Flagship of AP Technology: Olivier Martin1; Laurent Fiot1; David Munoz1; Xavier Berne1; Claude Ritter1; 1Rio Tinto Alcan

9:00 AMDX Pot Technology Powers Green Field Expansion: Ali Al Zarouni1; Marc Zelicourt1; Maryam Al Jallaf1; Kamel Alaswad1; Arvind Kumar1; Abdulla Al Reyami1; Vijay Kumar1; Dinesh Bakshi1; Jose Blasques1; Ibrahim Baggash1; 1DUBAL

9:25 AMNew Logistic Concepts for 400 and 500 kA Smelters: Maarten Meijer1; 1Hencon

9:50 AMThe Pot Technology Development in China: Zhu Jia ming1; Yang Xiaodong1; Sun Kangjian1; 1SAMI

10:15 AM Break

55

Technical Program

Tue.

AM

10:20 AMThe Newly Advancement of SY400 Pot: Sun Kangjian1; 1Shenyang Aluminum and Magnesium Engineering and Research Institute

10:45 AMSuccessful Commercial Operation of NEUI400 Potline: Xiquan Qi1; 1Northeastern University Engineering and Research Institute, Co., Ltd

11:10 AMContinues Advancement in Lanzhou Smelter: Sun Kangjian1; Jun Chen2; 1Lanzhou Branch CHALCO; 2Shenyang Aluminum and Magnesium Engineering and Research Institute

11:35 AMBaking Start-up and Operation Practices of 400kA Prebaked Anode Pots: Yungang Ban1; Xiquan Qi1; Dingxiong Lv1; Jihong Mao1; Yu Mao1; Zhaowen Wang1; Zhongning Shi1; Bingliang Gao1; Xianwei Hu1; 1Northeastern University Engineering and Research Institute Co. Ltd


Biological Materials Science: Mechanical Behavior of Biological Materials I: Nature-inspired MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chairs: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University

8:30 AM IOM Mehl Award Winner Announcement for Rob Ritchie

8:35 AM KeynoteInstitute of Metals/Robert Franklin Mehl Award Winner: Nature-Inspired Structural Materials: Robert Ritchie1; 1University of California Berkeley

9:15 AMMechanical Properties of Saxidomus Purpuratus Shells: Yang Wen1; Zhang Guangping2; Li Xiaowu1; Marc Andre Meyers3; 1Northeastern University; 2Institute of Metal Research Chinese Academy of Science; 3University of California, San Diego

9:35 AMStructure and Mechanical Properties of Armadillo Armor: Irene Chen1; Y. S. Lin1; P.-Y. Chen1; Marc Meyers1; J. McKittrick1; 1University of California, San Diego

9:55 AMBattle in the Amazon: Araipamas (Pirarucu) vs. Serrasalmus (Piranha): Marc Meyers1; Y. S. Lin1; P.-Y. Chen1; E. A. Olevsky2; J. McKittrick1; 1University of California, San Diego; 2San Diego State University

10:15 AM Break

10:25 AM InvitedBiological Materials, Biomaterials and Biomimetics: Ulrike Wegst1; 1Drexel University

10:55 AMWhat it Takes to be Light as a Feather: Sara Bodde1; Joanna McKittrick1; Marc Meyers1; 1University of California, San Diego

11:15 AMMicrostructural Features that Toughen Horn: Katya Novitskaya1; Ana Castro-Ceseña2; Luca Tombolato1; Po-Yu Chen1; Steven Lee1; Gustavo Hirata3; Joanna McKittrick1; 1University of California, San Diego; 2Centro de Investigación Científica y de Educación Superior de Ensenada; 3Center for Nanoscience and Nanotechnology

11:35 AMStructural Investigations on Demineralized and Deproteinated Bone: Ana Castro-Ceseña1; Po-Yu Chen2; Gustavo Hirata3; Damon Toroian2; Paul Price2; Joanna McKittrick2; 1Centro de Investigación Científica y de Educación Superior de Ensenada; 2University of California, San Diego; 3Center for Nanoscience and Nanotechnology

11:55 AMArthropod Cuticle: A Biological Multifunctional Composite Used As Template for Multidisciplinary Nano-To-Macro-Scale Hierarchical Modeling: Martin Friak1; Michal Petrov1; Svetoslav Nikolov1; Christoph Sachs1; Helge Fabritius1; Pavlina Elstnerova1; Duancheng Ma1; Liverios Lymperakis1; Dierk Raabe1; Sabine Hild2; Andreas Zigler3; Joerg Neugebauer1; 1Max Planck Institute for Iron Research; 2Johannes Kepler University Linz; 3University of Ulm

Bulk Metallic Glasses VII: Alloy Development and Application ISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: J. Eckert, IFW Dresden; Marios Demetriou, California Institute of Technology

8:30 AM InvitedStrengthening of Ti-Base Glass-Forming Alloys by Microstructure Design: J. Eckert1; 1IFW Dresden

8:50 AMNovel Semi-Solid Processing Techniques for Metallic Glass Matrix Composites: Douglas Hofmann1; Henry Kozachakov2; Hesham Khalifa3; Joseph Schramm2; Marios Demetriou2; Kenneth Vecchio3; William Johnson2; 1Liquidmetal Technologies; 2California Institute of Technology; 3University of California, San Diego

9:00 AM InvitedHigh Performance Structures Made of Ductile-Phase Reinforced Metallic Glass: Marios Demetriou1; Joseph Schramm1; Douglas Hofmann1; William Johnson1; 1California Institute of Technology

9:20 AMApplications for Amorphous Metals in Reactive Materials: Alan Brothers1; 1Mainstream Engineering

9:30 AM InvitedThermodynamics and Stability of Nanoglasses with Tunable Atomic Structure: Basic Ideas and First Results: Hans Fecht1; 1Ulm University

9:50 AMNanofabrication with Metallic Glasses: Golden Kumar1; Shiyan Ding1; Jan Schroers1; 1Yale University

10:00 AM Break

10:10 AM InvitedDevelopment of Bulk Metallic Glasses with High Plasticity Using the Surface Nano-Crystallization: Jian Lu1; Ji Tang Fan1; Qing Wang1; Yuan Hao Huang1; Hao Jiang1; 1The Hong Kong Polytech University

10:30 AMBulk Metallic Glasses and the Composites Fabricated by Microwave-Induced Heating and Sintering: Guoqiang Xie1; Song Li1; Dmitri V. Louzguine-Luzgin1; Motoyasu Sato2; Akihisa Inoue1; 1Tohoku University; 2National Institute for Fusion Science


56

Technical Program

Tue.

AM

10:40 AM InvitedFormation and Properties of New Au-Based Bulk Glassy Alloys with Ultralow Glass Transition Temperature: Wei Zhang1; Hai Guo2; Mingwei Chen3; Yasunori Saotome1; Chunling Qin3; Akihisa Inoue4; 1Institute for Materials Research, Tohoku University; 2Graduate School, Tohoku University; 3WPI, Advanced Institute for Materials Research, Tohoku University; 4Tohoku University

11:00 AMNanoglass Formation and Properties Studied by Molecular Dynamics Simulations: Daniel Sopu1; Karsten Albe1; Herbert Gleiter2; 1TU-Darmstadt; 2Research Center Karlsruhe

11:10 AM Fabrication and Mechanical Characterization of Zr-Based Bulk-Metallic-Glass-Matrix Composites: Junwei Qiao1; Yong Zhang1; 1USTB

11:20 AMSynthesis of Cu50Zr50Bulk Metallic Glasses Composites by Spark Plasma Sintering: Zhihui Zhang1; Troy Topping1; Ying Li1; Yizhang Zhou1; Enrique Lavernia1; 1University of California, Davis

11:30 AMSynthesis of Amorphous/Amorphous and Amorphous/Crystalline Composites in Phase Separating Gd-Ti-Al-(Co/Cu) Alloys: Sung Woo Sohn1; Wan Yook1; Hye Jeong Chang2; Won Tae Kim3; Do Hyang Kim1; 1Yonsei University; 2Oak Ridge National Laboratory; 3Cheongju University

11:40 AM InvitedAir-Oxidation of a (Zr55Cu30Al10Ni5)98Er2 Bulk Metallic Glass at 350-500°C: Wu Kai1; P.C. Kao1; I.F. Ren1; P.C. Lin1; Z.H. Hsiao1; D.W. Xing2; P.K. Liaw3; 1Institute of Materials Engineering, National Taiwan Ocean University; 2Department of Materials Science, Harbin Institute of Technology; 3Department of Materials Science and Engineering, The University of Tennessee, Knoxville

12:00 PMArtificial Microstructures as a Tool Box to Study Shear Band Stabilization in BMG Composites: Golden Kumar1; Jan Schroers1; 1Yale University

Carbon Dioxide and Other Greenhouse Gas Reduction Metallurgy - 2010: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Energy CommitteeProgram Organizers: Neale Neelameggham, US Magnesium LLC; Ramana Reddy, The University of Alabama; Jiann-Yang Hwang, Michigan Technological University; Jean-Pierre Birat, Arcelor Mittal; Kotaro Ogura, Yamaguchi University


Session Chairs: Mahesh Jha, US Dept of Energy; Lifeng Zhang, Missouri University


8:35 AM InvitedOverview of Removal Methods for CO2 and Other Greenhouse Gases and Details of the Method Using Non-Thermal Plasma: Marcela Morvová1; Imrich Morva1; Mario Janda1; 1Comenius University

9:15 AMDOE’s Industrial Energy Efficiency Grand Challenge Solicitation to Support Development of Technologies to Reduce Energy Intensity and Greenhouse Gas Emissions: Mahesh Jha1; Bhima Sastri1; 1U. S. Department of Energy

9:40 AMSunshine to Petrol: A Metal Oxide-Based Thermochemical Route to Solar Fuels: James Miller1; Richard Diver1; Nathan Siegel1; Eric Coker1; Andrea Ambrosini1; Daniel Dedrick1; Mark Allendorf1; Gary Kellogg1; Roy Hogan1; Ellen Stechel1; Ken Chen1; 1Sandia National Laboratories

10:05 AM Break

10:15 AMSynthetic Fuel Production Utilizing CO2 Recycling as an Alternative to Sequestration: Joseph Hartvigsen1; S Elangovan1; Lyman Frost1; Carl Stoots2; James O’Brien2; J. S. Herring2; Manohar Sohal2; Grant Hawkes2; 1Ceramatec Inc; 2Idaho National Laboratory

10:40 AMDevelopment of Self-Reduction as the Future of Metals-Making Technology: Jose Noldin1; D’Abreu José2; 1Tecno-Logos S/A; 2Catholic University (PUC-Rio)

11:05 AMSynthesis of Zeolitic Imidazolate Frameworks for Adsorbing Carbon Dioxide: Jinghua Zou1; Huimin Lu1; Min Li1; 1Beihang University

11:30 AMPhotochemical and Photo Electrochemical Conversion of Carbon Dioxide to Methanol Using Nanotubular TiO2: Manoranjan Misra1; S. Mohapatra1; 1University of Nevada

Cast Shop for Aluminum Production: Grain Refinement, Alloying, Solidification and Shape CastingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: John Grandfield, Grandfield Technology Pty Ltd; Pierre Le Brun, Alcan Voreppe Research Center


Session Chair: Rein Vainik, Swerea KIMAB

8:30 AMOn the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals: Dmitry Eskin1; Tetyana Atamanenko2; Liang Zhang2; Laurens Katgerman2; 1Materials Innovation Institute; 2Delft University of Technology

8:55 AMImpurities in Al-5Ti-1B (wt.%) Grain Refiner Rod: Brian McKay1; Georg Nunner1; Georg Geier2; Peter Schumacher1; 1University of Leoben; 2Austrian Foundry Institute

9:20 AMExperience with Production Scale Usage of Optifine – A High Efficiency Grain Refiner: John Courtenay1; Rein Vainik2; 1MQP Limited; 2Swerea KIMAB

9:45 AMEffects of Cooling Rate on Microstructure in En-Ac43000 Gravity Castings and Related T6 Mechanical Properties: Ivan Todaro1; Rosario Squatrito1; Alessandro Morri1; Luca Tomesani1; 1University of Bologna

10:10 AMEvaluation of Transient Heat Transfer Coefficient Evolution in EN43000 Gravity Castings towards Steel Chills with Different Interface Conditions: Rosario Squatrito1; Ivan Todaro1; Luca Tomesani1; 1University of Bologna

10:35 AMIn Situ Synchrotron Quantification of Fe-Rich Intermetallic Formation in Al-Si-Cu-Fe Alloys: Chedtha Puncreobutr1; Junsheng Wang1; Peter Lee1; 1Imperial College London

57

Technical Program

Tue.

AM

Characterization of Minerals, Metals and Materials: Characterization of AlloysSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Sergio Monteiro, State University of the Northern Rio de Janeiro – UENF; Donato Firrao, Politecnico di Torino

8:30 AMDetection of Creep Damage in a Nickel Base Super-Alloy by Nondestructive Means: Hector Carreon1; 1UMSNH

8:50 AMMicrostructural, Mechanical and Fatigue Properties of Cobalt Alloys: Giorgio Scavino1; Paolo Matteis1; Giovanni Mortarino1; Donato Firrao1; 1Politecnico di Torino

9:10 AMReconstruction and Visualization of Multi-Phase Three-Dimensional Microstructure of a Cast Al-Si Base Alloy: Arun Gokhale1; Harpreet Singh1; Yuxiong Mao1; Asim Tewari2; Anil Sachdev2; 1Georgia Institute of Technology; 2General Motors Co.

9:30 AMPhase Separation in Fe-20%Cr-6%Al-0.5%Ti ODS Alloy: Carlos Capdevila-Montes1; Michael Miller2; Felix Lopez1; Jesus Chao1; Kaye Russell2; 1CENIM-CSIC; 2ORNL

9:50 AMDevelopment of a High-Temperature Micro-Indentation Technique for Material Mechanical Property Evaluation up to 1200°C: Jared Tannenbaum1; Brody Conklin1; Bruce Kang1; Mary Anne Alvin2; 1West Virginia University; 2National Energy Technology Lab

10:10 AMCharacterization and Properties of a Stoichiometric NiTiPt High Temperature Shape Memory Alloy: Fan Yang1; Libor Kovarik1; Anita Garg2; Michael Kaufman3; Santo Padula2; Ronald Noebe2; Michael Mills1; 1The Ohio State University; 2NASA Glenn Research Center; 3Colorado School of Mines

10:30 AMEstimation of Three-Dimensional Mean Dihedral Angle in a W-Ni-Fe Alloy Liquid-Phase Sintered in Microgravity: Maneel Bharadwaj1; Arun Gokhale1; William Goodwin2; 1Georgia Institute of Technology; 2University of Tennessee

10:50 AMMicroscopic Analysis of Ni-Cr Alloy Produced by Single Roll Strip Casting: Sanjeev Das1; J. B. Seol1; Y.C. Kim2; C. G. Park1; 1POSTECH; 2Research Institute of Industrial Science and Technology

11:10 AMInfluence of TCP Phase on Enduring Property of Single Crystal Nickle-Based Superalloys: Tian Sugui1; Qian Benjiang1; Li Tang1; Wang Minggang1; Xie Jun1; 1Shenyang University of Technology

11:30 AMStructure and Properties of Melt-Spun Ni-Ti Shape Memory Alloy: Walman Castro1; Carlos Araújo1; George Anselmo1; 1Universidade Federal de Campina Grande

11:50 AMThe Modeling and Processes Research of Titan Aluminides Structurization Received by SHS Technology: Sereda Borys1; Aleksandr Zherebtsov1; Yuriy Belokon’1; 1ZSEA

12:10 PMInfluence of Preparing Technologies on Microstructure and Creep Behavior of GH4169 Alloy: Tian Sugui1; Li Zhenrong1; Zhao Zhonggang1; Chen Liqing2; Liu Xianghua2; 1Shenyang University of Technology; 2Northeast University

Coatings for Structural, Biological, and Electronic Applications: Metallic CoatingsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS: Thin Films and Interfaces CommitteeProgram Organizers: Nuggehalli Ravindra, New Jersey Institute of Technology; Gregory Krumdick, Argonne National Laboratory; Roger Narayan, Univ of North Carolina & North Carolina State Univ; Choong-un Kim, University of Texas at Arlington; Nancy Michael, University of Texas at Arlington


Session Chair: Roger Narayan, University of North Carolina


8:40 AMEvaluation of Thermal and Intrinsic Stress in Copper and Tantalum Sputtered Films: Anahita Navid1; Eric Chason2; Andrea Hodge1; 1University of Southern California; 2Brown University

9:05 AMSurface Modification of Steel Substrate by Pulsed Laser Deposition Technique: Shampa Aich1; Saket Ahuja1; Lakpathi Banoth1; Indranil Manna1; 1Indian Institute of Technology

9:30 AMA Nucleation and Growth Model for Pulse Plated Trivalent Chromium Deposition: Yong Choi1; Sik C. Kwon2; 1Sunmoon University; 2KIMS

9:55 AM Break

10:10 AMAn Investigation on Phase Formations and Microstructures of Ni-Rich NiTi Shape Memory Alloy Thin Films: B. Geetha Priyadarshini1; Shampa Aich1; Madhusudan Chakraborty1; 1Indian Institute of Technology

10:35 AMEffect of Heat Treatment on the Microstructure and Mechanical Properties of Ti-Mo-N Coating Films: Shoko Komiyama1; Yuji Sutou1; Junichi Koike1; 1Tohoku University

11:00 AMPVD Coated Hot Work Tool Steels for Tooling Applications in Semi-Solid Processing of Steels: Duygu Isler1; Yucel Birol2; Mustafa Urgen1; 1Istanbul Technical University; 2TUBITAK


58

Technical Program

Tue.

AM

Computational Thermodynamics and Kinetics: Wetting Phenomena ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign



8:30 AM InvitedGrain Boundary Premelting: Insights from Order Parameter Models: Alain Karma1; Ari Adland1; Robert Spatschek2; 1Northeastern University; 2Ruhr-University

9:00 AM InvitedMolecular Dynamics Simulations of Brazing: Edmund Webb1; Jeff Hoyt2; 1Sandia National Laboratories; 2McMaster University

9:30 AMA Hybrid Phase-Field and ALE Model for Reactive Wetting in Metal/Metal Systems: Shun Su1; Bruce Murray2; Ying Sun1; 1Drexel University; 2Binghamton University

9:50 AM Break

10:00 AM InvitedModeling Grain Boundaries: Wetting, Vacancies and Creep: James Warren1; William Boettinger1; 1NIST

10:30 AM InvitedAtomistic Behavior Driving High Temperature Contact Line Advancement: Ying Sun1; Edmund Webb2; 1Drexel University; 2Sandia National Laboratories

11:00 AMDiffusivity in Al-Cu and Cu-Zr Liquids: Shihuai Zhou1; Ralph E. Napolitano2; 1Ames Laboratory; 2Department of Materials Science and Engineering, Iowa State University

11:20 AMA Study of the Te Melting Line and Solid-Liquid Transitions: Chuck Henager1; Fei Gao1; John Jaffe1; 1PNNL

11:40 AMCompositional Patterning and Morphological Evolutions in Binary and Ternary Alloys Driven by Irradiation: Pascal Bellon1; Anoop Damodaran1; Daniel Schwen1; Robert Averback1; 1University of Illinois

12:00 PMIrradiation Induced Re-Solution and Growth of Xenon Nano-Bubbles Simulated by First Passage Monte Carlo: Daniel Schwen1; Robert Averback1; 1University of Illinois

Cost-Affordable Titanium III: Powder Consolidation and Properties ISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: James Withers, Materials and Electrochemical Research Corporation; Derek Fray, University of Cambridge

8:30 AMEquations for the Compaction of Titanium Powders: Stephen Gerdemann1; Paul Jablonski1; 1NETL

8:55 AMMaking Titanium Powder Metallurgy a Viable Alternative to Wrought for Manufacturing: James Sears1; 1South Dakota School of Mines and Technology

9:20 AMDevelopment of an Affordable Supply Chain for Meltless Titanium Alloys: Eric Ott1; Andy Woodfield1; Jon Blank1; Michael Peretti1; David Linger1; 1GE Aviation

9:45 AMConsolidation Process in Near Net Shape Manufacturing of Armstrong CP-Ti/Ti-6Al-4V Powders: Yukinori Yamamoto1; Jim Kiggans1; Michael Clark1; Stephan Nunn1; Adrian Sabau1; William Peter1; 1Oak Ridge National Laboratory

10:10 AM Break

10:25 AMTechnical Challenges and Solutions for Cost-Efficient Manufacturing of Complex Shape Parts from Ti Alloys via PM HIP: Victor Samarov1; 1Synertech PM Inc.

10:50 AMCost-Effective Production and Thermomechanical Consolidation of Titanium Alloy Powders: Deliang Zhang1; Stiliana Raynova1; Vijay Nadakuduru1; Peng Cao1; Brian Gabbitas1; Barry Robinson2; 1The University of Waikato; 2South Auckland Forging Engineering Ltd

11:15 AMThe Impact of Diffusion on Synthesis of High-Strength Titanium Alloys from Elemental Powder Blends: Orest Ivasishin1; Vadym Bondarchuk1; Dmytro Savvakin1; 1G.V. Kurdyumov Institute for Metal Physics, NAS of Ukraine

11:40 AMIn-situ Compression and Sintering of CP-Ti Powder Made by Armstrong Process: Wei Chen1; Yukinori Yamamoto2; William Peter2; 1Michigan State University; 2Oak Ridge National Lab

Electrode Technology for Aluminum Production: Non-Carbon Materials in CathodesSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Arne Ratvik, NTNU


59

Technical Program

Tue.

AM

8:35 AMLower Aluminium Production Cost through Refractory Material Selection: Ole-Jacob Siljan1; Steinar Slagnes2; Anton Sekkingstad2; Egil Furu1; Sigurd Aaram1; Asbjørn Solheim3; 1Hydro Aluminium AS; 2North Cape Minerals; 3SINTEF

9:00 AMChemical Degradation Map for Sodium Attack in Refractory Linings: Kati Tschöpe1; Tor Grande1; Jørn Rutlin2; 1NTNU; 2Hydro Aluminium AS

9:25 AMReactions in the Bottom Lining of Aluminium Reduction Cells: Asbjorn Solheim1; Christian Schøning1; Egil Skybakmoen1; 1SINTEF

9:50 AMSidewall Materials for the Hall-Heroult Process: Reiza Mukhlis1; Muhammad Rhamdhani1; Geoffrey Brooks1; 1Swinburne University of Technology

10:15 AM Break

10:30 AMExcellent Cryolite Resistance and High Thermal Conductivity SiC Sidewall Material for High-Amperage Aluminium Reduction Cells: Zhigang Huang1; 1LIRR

10:55 AMStructure Design and Deformation Measurements of C/TiB2 Function Gradient Materials for Aluminum Reduction Cathode: Jilai Xue1; Baisong Li1; Jun Zhu1; 1University of Science and Technology Beijing

11:20 AMElectrolysis Expansion Performance of TiB2-C Composite Cathode in [K3AlF6/Na3AlF6]-AlF3-Al2O3 Melts: Fang Zhao1; Lu Xiao-jun1; Li Jie1; Lai Yan-qing1; Tian Zhong-liang1; 1School of Metallurgical Science and Engineering, Central South University

Failure of Small-Scale Structures: Deformation Events in Pillars, Films and Other StructuresSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Marian Kennedy, Clemson Univeristy; Brad Boyce, Sandia National Laboratory; Reinhold Dauskardt, Stanford; Zhiwei Shan, Hysitron Inc


Session Chair: Zhiwei Shan, Hysitron Inc.

8:30 AM InvitedPrestraining and Annealing of Gold Micropillars: Strengthening and Weakening Turned Upside Down: William Nix1; Seok-Woo Lee1; 1Stanford University

8:55 AM InvitedIn-situ Micromechanical Testing: Johann Michler1; 1EMPA, Swiss Federal Laboratories for Materials Testing and Research

9:20 AMInvestigation of the Deformation Mechanism of Gum Metal by In Situ TEM Nanocompression Testing: Elizabeth Withey1; Andrew Minor1; Shigeru Kuramoto2; Daryl Chrzan1; John Morris1; 1University of California, Berkeley; 2Toyota Central R&D Laboratories, Inc.

9:35 AM InvitedA Combined Experimental and Simulation Study to Examine Lateral Constraint Effects in Ni Superalloy Microcrystals: Paul Shade1; Robert Wheeler2; Yoon-Suk Choi2; Michael Uchic3; Dennis Dimiduk3; Hamish Fraser4; 1Universal Technology Corporation; 2UES, Inc.; 3Air Force Research Laboratory; 4The Ohio State University

10:00 AM Break

10:15 AM InvitedInterface Fracture and Fatigue of Thin Metallic Films on Substrates: Gerhard Dehm1; Megan Cordill1; Walther Heinz2; Kurt Matoy3; F. Dieter Fischer4; 1University of Leoben, Materials Physics; 2Austrian Academy of Sciences, Erich Schmid Institute of Materials Science; 3Kompetenzzentrum Automobil- und Industrie-Elektronik GmbH; 4University of Leoben, Institute for Mechanics

10:40 AMBuckle Driven Delamination in Thin Gold Film-Compliant Substrate Systems: Neville Moody1; John Yeager2; E. David Reedy1; Edmundo Corona1; Marian Kennedy3; Megan Cordill4; David Adams1; David Bahr2; 1Sandia National Laboratories; 2Washington State University; 3Clemson University; 4Erich Schmid Institute

10:55 AMStrain Rate Sensitivity Effects on the Failure of Metal Films on Compliant Substrates: Megan Cordill1; Gerhard Dehm1; 1University of Leoben

11:10 AMFracture Properties of Fuel Cell Membranes: Ruiliang Jia1; Kemal Levi1; Takuya Hasegawa2; Jiping Ye3; Reinhold Dauskardt1; 1Stanford University; 2Nissan Motor Co., Ltd; 3Nissan ARC LTD.

11:25 AMExploiting Delamination to Fabricate Microcontact-Printed MEMS: Corinne Packard1; Vladimir Bulovic1; 1Massachusetts Institute of Technology

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Innovations in Additive ManufacturingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Michael Peretti, GE Aviation; Patrick Martin, AFRL-RX

8:30 AM InvitedAdditive Manufacturing’s Role in Fabrication and Repair of Aerospace Components: James Sears1; 1South Dakota School of Mines and Technology

9:00 AMAdvanced Gas Atomization Processing for Ti and Ti Alloy Powder Manufacturing: Iver Anderson1; James Sears2; David Byrd3; Joel Rieken4; Andrew Heidloff4; Mike Glynn3; Mark Ward3; 1Ames Laboratory; 2South Dakota School of Mines and Technology; 3n/a; 4Iowa State University

9:20 AMCold Spray Characteristics of Ti-6Al-4V Coating: Ahmad Rezaeian1; Eric Irissou2; Steve Yue1; 1McGill University; 2National Research Council Canada (NRC)

9:40 AMAdditive Manufacturing of Gamma Titanium Aluminide Parts by Electron Beam Melting: Silvia Sabbadini1; Oriana Tassa2; Paolo Gennaro3; Ulf Ackelid4; 1Avio SpA; 2Centro Sviluppo Materiali S.p.A; 3ProtoCast S.r.l.; 4Arcam AB

10:00 AM Break

10:20 AMProperties of Ti-5Al-5Mo-5V-3Cr Samples Produced via Powder Hot-Isostatic-Pressing: Nick Wain1; Xinjiang Hao1; Ravi Swamy1; Xinhua Wu1; 1The University of Birmingham


60

Technical Program

Tue.

AM

10:40 AMThe Influence of Thermal History on the Microstructure of Laser-Additive-Manufactured Ti-6Al-4V Samples: Xinhua Wu1; Laura Qian1; Junfa Mei1; 1The University of Birmingham

11:00 AMFabrication and Characterization of Reticulated, Porous Mesh Arrays and Foams for Aerospace Applications by Additive Manufacturing Using Electron Beam Melting: Sara Gaytan1; L.E. Murr1; F. Medina1; E. Martinez1; L. Martinez1; R.B. Wicker1; 1UTEP

11:20 AMProperties and Microstructure of Net Shape HIPped Ti6Al4V Components: Kun Zhang1; Junfa Mei1; Xinhua Wu1; 1The University of Birmingham

11:40 AMInfluence of Powder Particle Size on the Microstructure and Properties of HIPped Ti Alloy Powders: Kun Zhang1; Junfa Mei1; Xinhua Wu1; 1The University of Birmingham

Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids: Experiment ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Rainer Schmid-Fetzer, Clausthal University of Technology; Heike Emmerich, RWTH Aachen University; Frans Spaepen, Harvard University; Martin Glicksman, University of Florida; John Perepezko, University of Wisconsin, Madison


Session Chairs: David StJohn, University of Queensland; Heike Emmerich, RWTH Aachen

8:30 AM InvitedHeterogeneous Nucleation in Peritectic Systems: Rohit Trivedi1; Jongho Shin1; John Perepezko2; 1Iowa State University; 2University of Wisconsin-Madison

8:55 AMHeterogeneous Nucleation in Charged Colloidal Model Systems Induced by Seeds of Various Shape and Structure: Hans Joachim Schöpe1; Patrick Wette2; Andreas Engelbrecht1; Markus Franke1; 1University of Mainz; 2Deutsches Zentrum für Luft- und Raumfahrt

9:15 AMColloids as Model Systems for Undercooled Metallic Melts: Ina Klassen1; Patrick Wette1; Dirk Holland-Moritz1; Thomas Palberg2; Dieter M. Herlach1; 1German Aerospace Center; 2Johannes Gutenberg Universität Mainz

9:35 AMCompetition between Heterogeneous and Homogeneous Nucleation near a Flat Wall: Patrick Wette1; Hans-Joachim Schöpe2; Ina Klassen1; Dieter Herlach1; 1German Aerospace Center; 2Johannes Gutenberg Universität Mainz

9:55 AMPreliminary Investigation of the Nucleation of Si in Entrained Droplets in High Purity Al Alloys: Muhammad Zarif1; Brian McKay1; Peter Schumacher1; 1University of Leoben

10:15 AM Break

10:35 AM InvitedStudy of Heterogeneous Nucleation in High Purity Al-Si Alloys with Sr Addition: Peter Schumacher1; 1University of Leoebn

11:00 AMEmbryonic Crystallization in Al-Based Marginal Glass Forming Alloys: Eren Kalay1; Matthew Kramer1; Scott Chumbley1; Iver Anderson1; Ralph Napolitano1; 1Ames Laboratory

11:20 AMIntrinsic Heterogeneous Nucleation in Eutectic Systems: Joachim Bokeloh1; Gerhard Wilde1; 1Universität Münster

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session IIISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



8:30 AM InvitedAb Initio Modeling of the Lattice Stability of W in the Presence of Interstitials: Marcel Sluiter1; 1TU Delft

9:00 AM InvitedAlloy Thermodynamics without Lattice Stability?: Axel van de Walle1; 1Caltech

9:30 AM InvitedDFT, CE, CALPHAD and Phase Field, Cooperative Phenomena Powered by DDF: Suzana Fries1; 1ICAMS, Ruhr University Bochum

10:00 AM Break

10:30 AM InvitedFirst-Principles Calculations of Free Energies of Unstable Phases: Vidvuds Ozolins1; 1University of California, Los Angeles

11:00 AMAnother View of Phase Diagrams: John Morral1; Ximiao Pan1; 1Ohio State University

11:20 AM InvitedThe Kinetics of Diffusional and Structural Phase Transformations from First Principles: Anton Van der Ven1; 1University of Michigan

11:50 AM InvitedVibrational Thermodynamics at High Temperatures: Brent Fultz1; 1California Institute of Technology

International Symposium on High-Temperature Metallurgical Processing: Secondary ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Pyrometallurgy CommitteeProgram Organizers: Jaroslaw Drelich, Michigan Technological University; Jiann-Yang Hwang, Michigan Technological University; Tao Jiang, Central South University; Jerome Downey, Montana Tech


Session Chair: Jiann-Yang Hwang, Michigan Technological University

8:30 AM KeynoteOvercoming the Final Challenges to Initiating Production Treatment of EBR-II Spent Fuel at Idaho National Laboratory: Michael Simpson1; 1Idaho National Laboratory

61

Technical Program

Tue.

AM

9:10 AMRecovery of Iron and Zinc from Electric Arc Furnace Dust Using a Microwave Processing Method: Jiann-Yang Hwang1; Xiang Sun1; Xiaodi Huang1; 1Michigan Technological University

9:30 AMReduction Behavior of Chromium Oxide in Molten Stainless Steel Slag with Graphite: Qiuju Li1; 1Shanghai University

9:50 AMA Novel Process for Preparing Ferronickel Powder from Laterite Ores: Guanghui Li1; Mingjun Rao1; Tao Jiang1; Yuanbo Zhang1; Qian Li1; 1(School of Minerals Processing and Bioengineering, Central South University

10:10 AMPhase Equilibria in Ferrous Calcium Silicate Slags: Stanko Nikolic1; Hector Henao2; Peter Hayes2; Evgueni Jak2; 1Xstrata Technology; 2University of Queensland

10:30 AM Break

10:45 AMDecomposition/Volatilization of Enargite in Nitrogen-Oxygen Atmosphere: Rafael Padilla1; Alvaro Aracena1; Maria Ruiz1; 1University of Concepcion

11:05 AMInfluence of Additives on Dephosphorization of Oolitic Hematite by Direct Reduction Process: Guanghui Li1; Chaoming Xie1; Yuanbo Zhang1; Qian Li1; Tao Jiang1; 1School of Minerals Processing and Bioengineering, Central South University

11:25 AMThermodynamic Analysis and Experimental Test of primary Al-Si Alloy Prepared by Carbothermal Reduction of Bauxite Tailings: Yang Dong1; Di Yuezhong1; 1Northeastern University

11:45 AMThermodynamic Study on the Recovery of Vanadium from Low-Vanadium Hot Metal: Xuemei Qing1; Bing Xie1; Qingyun Huang1; Jianping Xiao1; 1Chongqing University

12:05 PMEffect of Damp Grinding on Preparation of Oxidized Pellet from Pyrite Cinders Concentrates: Jianchen Li1; Guohua Bai1; Guanghui Li1; Xiaoqing Zhou1; 1School of Minerals Processing and Bioengineering; Central South University

Jim Evans Honorary Symposium: Flow, Solidification, and Inclusion Behavior in Casting ProcessesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Vaughan Voller, University of Minnesota


8:40 AMInclusion Motion and Removal in a Steel Slab Continuous Casting Strands under EMBr: Lifeng Zhang1; Yufeng Wang1; 1Missouri University of Science and Technology

9:05 AMA General Enthalpy Method for Molding Solidification Phenomena: Vaughan Voller1; 1University of Minnesota

9:30 AMModelling of Mould Filling in Open Mould Conveyor Ingot Casting: Vu Nguyen1; Patrick Rohan1; John Grandfield2; Kevin Naidoo3; Kurt Oswald3; 1CSIRO; 2Grandfield Technology; 3o.d.t. Engineering

9:55 AMInfluence of a Plunging Liquid Jet on a Dual Alloy Casting: Autumn Fjeld1; Abdellah Kharicha1; Andreas Ludwig1; 1University of Leoben

10:20 AM Break

10:35 AMCentrifugal Casting of Complex Geometries: Computational Modelling and Validation Experiments: Diane McBride1; Nick Croft1; D. Shevchenko2; N. Humphreys2; P. Withey3; N. Green2; Mark Cross1; 1Swansea University; 2The University of Birmingham; 3Roll Royce Plc

11:00 AMIntegration of CFD Simulation and Virtual Reality Visualization for Iron and Steel Making: Chenn Zhou1; 1Purdue University Calumet

11:25 AMSurface Tension and Temperature Effect on Ar Bubbles Behavior at the Solid/Liquid Interface of the Steel: Sang-min Lee1; Sang-joon Kim1; Hae-geon Lee1; 1GIFT POSTECH

11:50 AMWater Model Experiments for Hydrodynamic Forces Acting on Inclusion Particles in Molten Metal under Turbulent Condition: Takuya Kato1; Shin-ichi Shimasaki1; Shoji Taniguchi1; 1Tohoku University

Magnesium Technology 2010: Coatings and CorrosionSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Susan Slade, US Magnesium LLC; Robert C. McCune, Robert C McCune & Associates LLC

8:30 AMGalvanic Corrosion and Stress Corrosion Cracking of Steel and Aluminum Bolts in Magnesium Die Cast Alloy AZ91: Gerhard Gerstmayr1; Gregor Mori2; Wilfried Eichlseder1; 1Chair of Mechanical Engineering, University of Leoben; 2University of Leoben

8:50 AMCharacterization of Multilayer Coating Prepared by Combining Plasma Electrolyte Deposition and Electroless Copper and BTA Passivity on Magnesium Alloy: Yongfeng Jiang1; Yefeng Bao1; 1Hohai University

9:10 AMEnhanced Corrosion Resistance of AZ91 Mg Alloy by Plasma Electrolytic Oxidation with KMnO4: Dong H. Shin1; In J. Hwang1; Ki R. Shin1; Kang M. Lee1; Bongyoung Yoo1; 1Hanyang University

9:30 AMLaser Surface Alloying of a Creep Resistant Magnesium Alloy MRI 230D with Al and Al2O3: G. Rapheal1; S. Kumar1; C. Blawert2; Narendra B. Dahotre3; 1Indian Institute of Science; 2GKSS Research Centre; 3The University of Tennessee

9:50 AMCorrosion Phenomenon Evaluation of Mg Alloys Using Surface Potential Difference Measured by SKPFM: Rei Takei1; Hiroyuki Fukuda1; Hisashi Imai1; Junko Umeda1; Katsuyoshi Kondoh1; 1Osaka University


62

Technical Program

Tue.

AM

10:10 AM Break

10:30 AMA Study of Corrosion Film Growth on Pure Magnesium and a Creep-Resistant Magnesium Alloy in an Automotive Engine Coolant: Zhiming Shi1; Pankaj Mallick1; Robert McCune2; S. Simko3; F. Naab4; 1University of Michigan-Dearborn; 2Robert C. McCune and Associates; 3Ford Research Laboratory, Ford Motor Co.; 4Ion Beam Laboratory, University of Michigan

10:50 AMElectroless Nickel Phosphorus Plating on AZ31: Georges Kipouros1; Khalid Shartal1; 1Dalhousie University

11:10 AMImproving Corrosion Performance of AZ31B Mg Alloy Sheet by Surface Polishing: Guang-Ling Song1; Zhenqing Xu2; 1GM R&D; 2Meda Limited Engineering and Technical Service

11:30 AMMicrostructure and Corrosion of AZ91D with Small Amounts of Cerium: Daniela Zander1; Meredith Heilig2; Norbert Hort3; Gerald Klaus4; Andreas Buehrig-Polaczek4; Joachim Gröbner5; Rainer Schmid-Fetzer5; 1TU Dortmund; 2Colorado School of Mines; 3GKSS Research Centre; 4Foundry-Institute of RWTH Aachen; 5TU Clausthal

11:50 AMEffect of Neodymium Addition on Corrosion Resistance of Mg-Li Alloy: Min Li1; Guang Chun Yao1; Yi Han Liu1; Hai Bin Ji1; 1Northeastern University

Magnesium Technology 2010: Creep, Relaxation, Recovery, and RecrystallizationSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Xiaoqin Zeng, Shanghai Jiao Tong University; Eric Nyberg, Pacific Northwest National Laboratory

8:30 AMEffect of Aluminum Addition on the Strengthening and High Temperature Deformation Behavior of Mg-3Sn-2CaAlloy: Pitcheswara Kamineni1; Y.V.R.K. Prasad1; Norbert Hort2; Karl Kainer2; 1City University of Hong Kong; 2GKSS Research Centre

8:50 AMAtomistic Simulation of Grain Boundary Sliding in Mg during High Temperature Deformation: Hao Zhang1; 1University of Alberta

9:10 AMGrain Size Effect on the Dome-Forming Limit and Deformation Mechanism of AZ31B Magnesium Alloy Sheets: HyungLae Kim1; WonKyu Bang2; YoungWon Chang1; 1POSTECH; 2RIST

9:30 AMApproaching Bolt Load Retention Behaviour of AS41 through Compliance and Creep Deformation: Okechukwu Anopuo1; Yuanding Huang1; Norbert Hort1; Hajo Dieringa1; Karl Kainer1; 1GKSS Research Centre

9:50 AMGrain Boundary Sliding Characteristics of Az31 Alloy Sheet: Yong-Nam Kwon1; 1Korea Institute of Materials Science

10:10 AM Break

10:30 AMElevated Temperature Tensile Behavior of Extruded Magnesium Sheets: Paul Krajewski1; Adi Ben-Artzy2; 1General Motors; 2Rotem Industries Ltd

10:50 AMElevated-Temperature Tensile Behavior of a Rapidly Solidified and Reverse Extruded Mg-Zn-Y-Ce-Zr Alloy: Jon Carter1; Paul Krajewski1; Dan Shechtman2; 1General Motors R&D; 2Technion-Israel Institute of Technology

11:10 AMMicrostructure, Tensile Properties and Creep Resistance of Binary Mg-Rare Earth Alloys: Mark Gibson1; Suming Zhu1; Mark Easton1; Jian-Feng Nie1; 1CAST CRC

11:30 AMThe Role of Strain on the Recrystallization Behaviour of Hot Worked and Annealed Magnesium Alloy Mg-3Al-1Zn: Aiden Beer1; 1Deakin University

11:50 AMThe Relationships between Grain Boundary Sliding and Grain Orientation in AZ31 Magnesium Alloys at Room Temperature: Daisuke Ando1; Yuji Sutou1; Junichi Koike1; 1Tohoku University

12:10 PMTexture Change in Pure Mg and Mg-1.5wt%Mn Casting Alloy during Compressive Creep-Deformation: Mert Celikin1; D. Sediako2; Mihriban Pekguleryuz1; 1McGill University; 2Canadian Neutron Beam Centre, NRC

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: Materials for Hydrogen Production, Storage, and DistributionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: Jason P. Trembly, Center for Energy Technology, RTI International; Richard Ricker, NIST

8:30 AM InvitedCo-Production of Pure Hydrogen and Electricity from Coal Syngas via the Steam-Iron Process Using Promoted Iron-Based Catalysts Sub-Pilot Plant Based Studies: Jason P. Trembly1; Brian S. Turk1; Raghubir P. Gupta1; 1Center for Energy Technology, RTI International

9:10 AMHigh Permeability Ternary Palladium Alloy Membranes with Improved Sulfur and Halide Tolerances: Kent Coulter1; J. Douglas Way2; David Sholl3; Bill Pledger4; Gokhan Alptekin5; 1Southwest Research Institute; 2Colorado School of Mines; 3Georgia Institute of Technology; 4IdaTech LLC; 5TDA Research

9:30 AMPalladium-hydrogen Interaction in Dislocations: Trapping and Diffusion: Hadley Lawler1; Dallas Trinkle1; 1University of Illinois, Urbana-Champaign

9:50 AMMaterials Metrology for a Hydrogen Distribution Infrastructure: Richard Ricker1; Thomas Siewert1; Andrew Slifka1; David McColskey1; David Pitchure1; 1NIST

10:10 AM Break

10:20 AMInfluence of Activation Process on the Hydrogen Storage Properties of Carbon Materials: Vinay Bhat1; Cristian Contescu1; Nidia Gallego1; Frederic Baker1; 1Oak Ridge National Lab

63

Technical Program

Tue.

AM

10:40 AMHydrogen Storage Using Electric Field Enhanced Adsorption: Jiann-Yang Hwang1; Shangzhao Shi1; Xiang Sun1; Stephen Hackney1; Xuan Li2; 1Michigan Technological University; 2University of Science and Technology Beijing

11:00 AMEffect of Hydrogen on the Mechanical Behavior of AISI 4340 and SA372 Steels: Anil Saigal1; Junior Aguaze2; Gary Leisk1; Chris San Marchi3; Douglas Matson1; 1Tufts University; 2Boeing Co.; 3Sandia National Laboratory

11:20 AMNi3Al Foil Catalysts for Hydrogen Production from Methanol: Ya Xu1; Dong Hyun Chun2; Jun Hyuk Jang3; Masahiko Demura1; Dang Moon Wee3; Toshiyuki Hirano1; 1National Institute for Materials Science; 2Korea Institute of Energy Research; 3Korea Advanced Institute of Science and Technology

11:40 AMInterfacial Facture Toughness of α-Al2O3(0001)/β-NiAl(110): Kuiying Chen1; I. Ofzidani2; L. Zhao3; 1National Research Council Canada ; 2University of Ottawa; 3National Research Council Canada

Materials Processing Fundamentals: Process Modeling and MeasurementsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Process Technology and Modeling CommitteeProgram Organizer: Prince Anyalebechi, Grand Valley State University



8:30 AMFinite Element Modeling of the Twin-Roll Strip Casting Process: Application to an AZ31 Magnesium Alloy: Youliang He1; Elhachmi Essadiqi1; 1Natural Resources Canada

8:50 AMA Thermodynamic Model and Database for Gaseous Species Dissolved in Molten Multicomponent Slags: Youn-Bae Kang1; Arthur Pelton1; 1Ecole Polytechnique de Montreal

9:10 AMStress Analysis and Deformation Prediction of a Heavy Hydraulic Turbine Blade Casting in Heat Treatment Process: Jinwu Kang1; 1Tsinghua University

9:30 AMDiscreate Particle Simulation of Solid Flow in a Blast Furnace: Hun-je Jung1; Jong-in Park1; 1Inha University

9:50 AMUltrasound Removing Oxygen Gas Bubbles on Anode and Reducing Cell Voltage during Pb Electrodeposition: Jilai Xue1; Yifang Zheng1; Jiegang Li1; 1University of Science and Technology Beijing

10:10 AM Break

10:20 AMLorentz Force Velocimetry: Fundamentals and Application: Christian Karcher1; Yuri Kolesnikov1; Vitaly Minchenya1; Andre Thess1; 1Ilmenau University of Technology

10:40 AMThe Studying of Nonstoichiometric Pyrrhotites Heat Capacity: Tatyana Chepushtanova1; Vladimir Luganov1; Brajenda Mishra2; 1Kazakh National Technical University; 2CSM

11:00 AMMulti-Scale Solidification Model for Laser Engineered Net Shaping (LENS) Process: Hebi Yin1; Sergio Felicelli1; 1Mississippi State University

11:20 AMMultitechnique Characterization and Prediction of Phase Diagram Topology: Marcelle Gaune-Escard1; 1Ecole Polytechnique, CNRS UMR 6595

11:40 AMHigh-Strength Spring Steel: S.A.J. Forsik1; Sangwoo Choi2; P.E.J. Rivera-Diaz-del-Castillo3; Sybrand van der Zwaag1; 1Delft University of Technology; 2POSCO Lab.; 3University of Cambridge

12:00 PMHigh Temperature Oxidation of Fe-Cu-Sn Alloys for Surface Hot Shortness: Lan Yin1; Sridhar Seetharaman1; 1Carnegie Mellon University

Mechanical Performance for Current and Next-Generation Nuclear Reactors: Advances in Modeling for Reactor ConditionsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Dylan Morris, NIST; Greg Oberson, Nuclear Regulatory Commission; Nicholas Barbosa, National Institute of Standards & Tech; Wolfgang Hoffelner, Paul Scherrer Institute


Session Chairs: Ioannis Mastorakos, Washington State University; Dylan Morris, NIST

8:30 AM InvitedAtomic-Scale Modeling of the Dislocation - Radiation Obstacle Interactions Responsible for Mechanical Property Changes in Irradiated Metals: Brian Wirth1; Hyon-Jee Lee1; 1University of California, Berkeley

9:00 AMMultiscale Modeling of Amorphous-Fe and Fe-Ni Systems Used in Extreme Environments such as Nuclear Reactors: Ioannis Mastorakos1; N. Le1; H.M. Zbib1; M. Khaleel2; 1Washington State University; 2Pacific Northwest National Laboratory

9:20 AMInfluence of Hydrostatic Stress on Primary Defect Generation during Displacement Cascade in a-Fe: Kevin Boyle1; Ronald Miller2; 1CANMET-MTL; 2Carleton University

9:40 AMPhase-Field Simulation of Void and Fission-Gas Bubble Evolution in Irradiated Polycrystalline Materials: Paul Millett1; Anter El-Azab2; Michael Tonks1; Srujan Rokkam2; Dieter Wolf1; 1Idaho National Laboratory; 2Florida State University

10:00 AMModeling the Effect of Stress on Defect Migration and Void Formation Using the Phase Field Method: Michael Tonks1; Anter El-Azab2; Paul Millett1; Dieter Wolf1; 1Idaho National Laboratory; 2Florida State University

10:20 AM Break

10:35 AMModelling Steels Used in Nuclear Energy Applications: Maria Samaras1; Maximo Victoria1; Wolfgang Hoffelner1; 1Paul Scherrer Institute

10:55 AMUniversal Scaling of Work Hardening Parameters in Type 316L(N): Isaac Edwin1; B. K. Choudhary2; 1Pohang University of Science and Technology; 2Indira Gandhi Centre for Atomic Research

11:15 AMExperimental Analysis and Computational Modeling of Temperature Dependent Cyclic Plastic Hardening and Strain Controlled Ratcheting: Koen Janssens1; 1Paul Scherrer Institute


64

Technical Program

Tue.

AM

11:35 AMIntergranular Thermal Residual Strain in Rolled and Texture-Free a-Uranium: Don Brown1; James Wollmershauser2; Bjørn Clausen1; Thomas Sisneros1; 1Los Alamos National Laboratory; 2University of Virginia

11:55 AMEvolution of the Thermo-Mechanical Response of Nitride and Oxide Nuclear Fuels through Microstructurally Explicit Models: Manuel Parra Garcia1; Kirk Wheeler1; Kenneth McClellan2; Pedro Peralta1; 1Arizona State University; 2Los Alamos National Laboratory

12:15 PMFirst Principles Study of Defects in Uranium.: Nikolas Antolin1; Oscar Restrepo1; John Morral1; Wolfgang Windl1; 1Ohio State University

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Plasticity and Strength of Nanostructured and Nanoscale Materials IIISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State University

8:30 AMEffects of Vacancies on Dislocation Nucleation in Metals – An Atomistic Simulation Study: Sergey Medyanik1; Iman Salehinia1; 1WSU

9:00 AMOn Homogeneous Nucleation of Dislocation Loops in Nanocrystalline Materials: Yuri Estrin1; Vincent Lemiale2; Rob O’Donnell2; Laszlo Toth3; 1Monash University; 2CSIRO; 3Universite de Metz

9:20 AMReal Space Dislocation Dynamics Model Using the Phase Field Approach: Siu Sin Quek1; Rajeev Ahluwalia1; David Srolovitz2; 1Institute of High Performance Computing Singapore; 2Yeshiva University

9:40 AM Break

10:00 AM InvitedDislocation Dynamics Simulations of Thin Film Nanoimprinting: Yunhe Zhang1; Erik Van der Giessen2; Lucia Nicola1; 1Delft University of Technology; 2University of Groningen

10:30 AMMicrostructural Aspects of Material Strength in Small Volumes: Amine Benzerga1; P. J. Guruprasad1; 1Texas A&M University

10:50 AMTemporal Statistics in the Framework of Kinetic Theory of Crystal Dislocations: Jie Deng1; Mamdouh Mohamed1; Anter El-Azab1; 1Florida State University

11:10 AMMultiscale Simulation of Crystals, Defects and Deformation Using the Phase Field Crystal Model: Zhi Huang1; Jonathan Dantzig1; 1University of Illinois at Urbana-Champaign

Neutron and X-Ray Studies of Advanced Materials III: Diffuse Scattering ISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Zahirul Islam, Argonne National Laboratory; Jan Ilavsky, Argonne National Laboratory

8:30 AM KeynoteX-Ray and Neutron Scattering for the Examination of Micro- and Nanostructured Materials: Gernot Kostorz1; 1ETH Zurich

9:00 AM InvitedX-Ray Scattering Investigation of Semiconductor Magnetic Composite Materials: Vaclav Holy1; Guenther Bauer2; Rainer Lechner2; 1Charles University in Prague; 2J. Kepler University

9:20 AM InvitedDepth Dependent Ordering, Two Length Scale Phenomena and Crossover Behavior in a Defective Skin Layer of V2H: Kevin Bassler1; Charo Del Genio1; Johann Trenkler2; Aleksandr Korzhenevskii3; Rozaliya Barabash4; Simon Moss1; 1University of Houston; 2Carl Zeiss SMT AG; 3Institute of Problems of Mechanical Engineering; 4Oak Ridge National Laboratory

9:40 AM InvitedUsing X-Ray Correlation Spectroscopy to Test Dynamical Scaling: Mark Sutton1; 1McGill University

10:00 AM InvitedPair Distribution Function of Relaxed Se-Clusters inside a Zeolite Structure: M. Castro-Colin1; T. Baruah1; R. Zope1; A. Abeykoon2; W. Donner3; M. Brunelli4; S. Moss2; A. Jacobson2; 1University of Texas at El Paso; 2University of Houston; 3Technische University Darmstadt; 4ESRF

10:20 AM InvitedQuantification of Void Network Architectures of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings Using Ultra-Small Angle Scattering (USAXS): Jan Ilavsky1; Ghislain Montavon2; Alain Denoirjean2; Stéphane Valette2; Pierre Fauchais2; 1APS, Argonne National Laboratory; 2Université de Limoges

10:40 AM InvitedNear-Surface and Bulk Microstructure: A Comparative Study for Ni-Pt and Pt-Rh: Bernd Schoenfeld1; 1ETH Zurich

11:00 AM InvitedComplex Intermetallics – The Decisive Role of Weak Reflections: Walter Steurer1; Thomas Weber1; Miroslav Kobas2; 1ETH Zurich; 2Dectris Ltd.

11:20 AM Break

11:30 AM InvitedMapping Phonon Dispersions and Anomalies with X-Ray Thermal Diffuse Scattering: Tai Chiang1; Ruqing Xu1; Hawoong Hong2; 1University of Illinois; 2Argonne National Laboratory

11:50 AM InvitedX-Ray Studies of Structural Effects Induced by Pulsed (30 Tesla), High Magnetic Fields at the Advanced Photon Source: Zahirul Islam1; 1Argonne National Laboratory

65

Technical Program

Tue.

AM

12:10 PMInvestigation of the Nanoscale Nial Precipitates in the Ferritic Superalloy by USAXS: Shenyan Huang1; Xin Li2; Gautam Ghosh3; Jan Ilavsky4; Zhenke Teng1; Morris E. Fine3; Emily Liu2; Peter Liaw1; 1University of Tennessee; 2Rensselaer Polytechnic Institute; 3Northwestern University; 4Argonne National Laboratory

12:20 PM InvitedStudies Phase Evolution of Triblock Copolymer Solutions by Small Angle Neutron and X-Ray Scattering: Effects of Molecular Weight, Temperature, Pressure and Salt: Lixin Fan1; Liang Guo2; Papanan Thiyagarajan3; 1Rigaku Innovative Technologies; 2Argonne National Laboratory; 3Office of Basic Energy Sciences, U.S. Department of Energy,

12:40 PMRole of External Stimuli on Phase Transformation in Ferromagnetic Shape-Memory Alloys and Related Properties: Yandong Wang1; Yang Ren2; Zhihua Nie1; Gang Wang3; Ru Lin Peng4; Sten Johanson4; Daoyong Cong5; Stefen Roth5; Tomoyuki Terai6; Tomoyuki Kakeshita6; Dennis Brown7; 1Beijing Institute of Technology; 2Argonne National Laboratory; 3Northeastern University; 4Linköping University; 5IFW Dresden; 6Osaka University; 7Northern Illinois University

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Reliability (I)Sponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: Thomas Bieler, Michigan State University; Fu Guo, Beijing University of Technology

8:30 AM InvitedThe Interaction between Imposed Current and Creep of Idealized Snagcu Solder Interconnects: John Morris1; Christopher Kinney1; Xio Linares1; Tae-Kyu Lee2; 1University of California - Berkeley; 2Cisco Systems

8:55 AMAnalysis of Simple Shear of Lead-Free Solder Joints to Examine Heterogeneous Strain and Slip System Activity: Bite Zhou1; Thomas Bieler1; Tae-Kyu Lee2; Kuo-Chuan Liu2; 1Michigan State University; 2Cisco Systems, Inc.

9:10 AMBending and Strain/Stress Distribution on Flip Chips Measured by Using Synchrotron X-Ray Laue Microdiffraction: Kai Chen1; Nobumichi Tamura1; Wei Tang2; Martin Kunz1; King-Ning Tu2; 1LBNL; 2UCLA

9:25 AMWafer Bonding Using an Amorphous Si-Au Eutectic Structure: Maryam Abouie1; Qi Liu1; Douglas G. Ivey1; 1University of Alberta

9:40 AMEffect of Pb Addition on Creep and Tensile Behavior of SAC 305 Solder: Jonathon Tucker1; Carol Handwerker1; Ganesh Subbarayan1; 1Purdue University

9:55 AMImpact Testing of Sn3.0Ag0.5Cu Solder with Ti/Ni(V)/Cu under Bump Metallization after Aging at 150 C: Kai-Jheng Wang1; Jenq-Gong Duh1; Bob Sykes2; Dirk Schade2; 1National Tsing Hua University; 2XYZTEC bv

10:10 AM Break

10:25 AMModeling of Pb-Free BGA Solder Joint Fatigue Life during Random Vibration: Fengjiang Wang1; Matthew O’Keefe1; 1Missouri University of Science and Technology

10:40 AMImproved Reliability of Sn-Ag-Cu-In Solder Joint by the Addition of Trace Elements: A-Mi Yu1; Mok-Soon Kim1; Jong-Hyun Lee2; Jeong-Han Kim3; Jun Ki Kim3; 1Inha University; 2Seoul National University of Technology; 3Korea Institute of Industrial Technology

10:55 AMImprovement of Heat Dissipation in High-Power Light-Emitting Diodes Using Highly Heat Conductive Die-Attach Material: Chia-ju Chen1; Chih-ming Chen1; 1National Chung Hsing University

11:10 AMMechanism of Microstructure Evolution and Fatigue Failure in Lead Free Solder Joint: Jeong Min Kim1; Woong Ho Bang1; Choong-Un Kim1; Tae-Kyu Lee2; Hongtao Ma2; Kuo-Chuan Liu2; 1University of Texas at Arlington; 2Cisco System Inc.

11:25 AMEffect of Joule Heating on Thermo-Electromigration Induced Failure in Lead-Free Solder: Di Xu1; Luhua Xu1; Shih-Wei Liang2; Stephen Gee3; Luu Nguyen3; Marshall Andrews4; K.N. Tu1; 1UCLA; 2National Chiao Tung University, Taiwan; 3National Semiconductor Corporation; 4High Density Packaging User Group international, Inc

11:40 AMEffect of Minor Alloying on the Performance of Snagcu Solder Joints under Ball Impact Test: Yao-Ren Liu1; Jenn-Ming Song1; Yi-Shao Lai2; Ying-Ta Chiu2; 1National Dong Hwa University, Taiwan; 2Advanced Semiconductor Engineering, Inc.

11:55 AMUncovering the Driving Force for Massive Spalling: Wei-Ming Chen1; Su-Chun Yang1; C. Robert Kao1; 1National Taiwan University

Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials IX: Session IIISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases CommitteeProgram Organizers: Chih-ming Chen, National Chung Hsing University; Srinivas Chada, Medtronic; Sinn-wen Chen, National Tsing-Hua University; Hans Flandorfer, University of Vienna; A. Lindsay Greer, University of Cambridge; Jae-ho Lee, Hongik University; Kejun Zeng, Texas Instruments; Yee-wen Yen, National Taiwan University of Science and Technology; Wojciech Gierlotka, AGH University of Science and Technology; Chao-hong Wang, National Chung Cheng University


Session Chairs: Sinn-wen Chen, National Tsing Hua University; Alexandre Kodentsov, Eindhoven University of Technology

8:30 AM InvitedNew Challenges and Solutions for Metal-Semiconductor Contacts: Suzanne Mohney1; 1Pennsylvania State University

8:55 AM InvitedReaction Diffusion in GaSb/Co Metallization Contacts during Thermal Processing: Alexandre Kodentsov1; 1Eindhoven University of Technology


66

Technical Program

Tue.

AM

9:20 AMDevelopment of Advanced Barrierless Interconnect Using Novel Cu Alloy Seed: Chon-Hsin Lin1; Jinn P. Chu2; C.H. Wu2; W.K. Leau3; 1Chin-Min Institute of Technology/Environmental Engineering; 2National Taiwan University of Science and Technology/Graduate Institute of Materials Science and Technology; 3National Taiwan Ocean University/Institute of Materials Engineering

9:40 AMThe Effect of Arsenic Dopant in Nickel Silicide Formation: S.Y. Tan1; Yi-Lun Hsia1; Hsing-Hung Chen1; Ming-Yuan Wu1; 1Chinese Culture University

10:00 AM Break

10:20 AM InvitedThermal Stability of Advanced Gate Stacks for Microelectronic Devices- the Case of Pt/Gd2O3/Si: Moshe Eizenberg1; Eran Lipp1; 1Technion

10:45 AMObservations on the Melting of Metallic Nanoparticle Deposites via In-situ Synchrotron Radiation X-Ray Diffraction: Tzu-Hsuan Kao1; Jenn-Ming Song2; In-Gann Chen1; Teng-Yuan Dong3; Weng-Sing Hwang1; 1National Cheng Kung University, Tainan; 2National Dong Hwa University, Hualien, Taiwan; 3National Sun Yat-Sen University, Kaohsiung, Taiwan

11:05 AMControl of the Interface Traps in Hf-Based Gate Dielectric Films on Silicon: S.Y. Tan1; Yi-Lun Hsia1; Ming-Yuan Wu1; Hsing-Hung Chen1; 1Chinese Culture University

11:25 AMPhase Stability and Phase Transformations, in the Ternary Cd-Sb-Zn: Application to the Growth of a Thermoelectric Material: Jean Claude Tedenac1; Ya Liu1; 1ICG

11:45 AMMechanical Properties of (Ni, Cu)3Sn4 Ternary Crystal Structure Using First-Principle Calculation: Feng Gao1; Jianmin Qu1; 1Northwestern University

Processing Materials for Properties: Advanced Steel ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Florian Kongoli, FLOGEN Technologies Inc; Sven Vogel, Los Alamos National Laboratory

8:30 AM KeynoteControl Microstructures in Iron-Based Alloys by Directional Recrystallization: Z. W. Zhang1; G. Chen1; H. Bei2; G. L. Chen3; C. T. Liu4; 1Nanjing University of Science and Technology; 2Oak Ridge National Laboratory; 3USTB; 4Auburn University

9:00 AMCasting Practice for High-Carbon Nitrogen-Alloyed Chromium-Manganese Austenitic Stainless Steels: Meredith Heilig1; Brajendra Mishra1; Manuel Marya2; David Olson1; 1Colorado School of Mines; 2Schlumberger Reservoir Completion Center

9:20 AMThe State of the Indian Steel Industry: Sanak Mishra1; 1Arcelor Mittal India

9:40 AMProcessing and Electrochemical Corrosion Resistance of a Nanocrystalline Fe-20Cr Alloy: Rajeev Gupta1; Raman Singh1; Carl Koch2; 1Monash University; 2North Carolina State University

10:00 AM Break

10:10 AMTowards Modelling of Phase Transformation and Mechanical Properties in Hot Rolled Dual Phase Steel: Piyada Suwanpinij1; Krishnendu Mukherjee1; Marcel Graf1; Ulrich Prahl1; Wolfgang Bleck1; Rudolf Kawalla2; 1RWTH Aachen University; 2Institute for Metal Forming (IMF), Freiberg University of Mining and Technology

10:30 AMA Novel Asymmetric Rolling Method for Controlling Texture of Plates and Sheets: Dincer Bozkaya1; Peter Jepson1; 1H.C. Starck Inc.

10:50 AMLaser Surface Modification of AISI 410 Stainless Steel with Brass for Enhanced Thermal Properties: Felix Espana1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

11:10 AMDevelopment of Ferritic Steels with Increased Strength and Ductility: Semyon Vaynman1; Monica Kapoor1; Dieter Isheim1; Gautam Ghosh1; Morris Fine1; Yip-Wah Chung1; 1Northwestern University

11:30 AMEffect of Deformation Ratio and Cooling Rate on Mechanical Properties and Microstructure of 0.08wt% C HSLA Steel Microalloyed with Nb and Mo: Taher El-Bitar1; Ahmed Zaky Farahat1; Almosilhy Almosilhy1; Ahmed Hegazy1; 1Central Metallurgical Research and Development Institute

11:50 AMInfluence on Non-Metallic Inclusions and Magnetic Properties by Deoxidation Method in Non-Oriented Electrical Steel: Zhang Feng1; Li Guang-qiang2; Chen Xiao1; 1Silicon Steel Department, Baoshan Iron and Steel Co. Ltd; 2Wuhan University of Science and Technology

Refractory Metals 2010: Oxidation of Alloys and CoatingsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Refractory Metals CommitteeProgram Organizers: Brian Cockeram, Bechtel-Bettis; Gary Rozak, H.C. Stark

Tuesday AM Room: 2AFebruary 16, 2010 Location: Washington State Convention Center

Session Chairs: Brian Cockeram, Bechel Marine Propulsion Corporation; Gary Rozak, H. C. Starck, Inc.

8:30 AMDevelopment of Oxidation Protective Coatings for Molybdenum Alloys: Ridwan Sakidja1; Travis Sossaman1; John Perepezko1; 1University of Wisconsin-Madison

8:55 AMRefractory Metal Alloys for Ultra High Temperature Applications: Panayiotis Tsakiropoulos1; 1The University of Sheffield

9:20 AMMicrostructures and High Temperature Oxidation Behavior of Mo-Ni-Al Alloys: Pratik Ray1; Travis Brammer1; Mufit Akinc1; Matthew Kramer2; 1Iowa State University; 2Ames Laboratory

9:45 AMComparison of the Oxidation Behavior of Nb-20Mo-15Si-25Cr and Nb-20Mo-15Si-25Cr-5B Alloys from 700 to 1300°C: Benedict Portillo1; Shailendra Varma1; 1The University of Texas at El Paso

10:10 AM Break

10:25 AMEffect of Al on the Oxidation Behavior of Nb-Si-Cr Alloys in Air from 700 to 1300°C: Clemente Parga1; David Alvarez1; Shailendra Varma1; 1The University of Texas at El Paso

67

Technical Program

Tue.

AM

10:50 AMGeneral Chemical Solution Deposition to Epitaxial Growth of Transition Metal (Ti, Nb, V, Ta, etc.) Carbide Films: Guifu Zou1; Haiyan Wang2; Nathan A. Mara1; Quanxi Jia1; 1Los Alamos National Laboratory; 2Texas A&M University

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Mechanical Properties and Interaction with DislocationsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chairs: Sylvie Aubry, Stanford University; Kedarnath Kolluri, Massachusetts Institute of Technology

8:30 AM InvitedTEM Analysis of the Structure and Deformation Behavior of an Incommensurate Grain Boundary in Gold: Ulrich Dahmen1; Jia Ye1; Andy Minor1; Tamara Radetic1; Damien Caliste2; Frederic Lancon2; 1NCEM; 2CEA

9:00 AMCoupling between Grain Boundary Sliding and Migration: Analysis of Possible Mechanisms: Askar Sheikh-Ali1; 1Kazakh-British Technical University

9:20 AMStructure and Hardness of V/Ag Multi-Layers: Qiangmin Wei1; Amit Misra1; 1Los Alamos National Lab

9:40 AMAtomic-Scale Study of Nanoindentation in FCC Crystal with Internal Interface: Yury Osetskiy1; Anna Serra2; Roger Stoller1; 1ORNL; 2UPC

10:00 AMSimulations of Dislocation Pile-up at Asymmetric Tilt Boundary in Aluminum: Steven Valone1; Timothy Germann1; Richard Hoagland1; Authur Voter1; Danny Perez1; Zhiqiang Wang1; 1Los Alamos National Laboratory

10:20 AM Break

10:40 AM InvitedDuctility, Interfacial Shear, and Fracture of Cu/Nb Nanolayered Composites: Nathan Mara1; Dhriti Bhattacharyya1; Pat Dickerson1; Richard Hoagland1; Amit Misra1; 1Los Alamos National Laboratory

11:10 AMComputer Simulation of Boundary – Dislocation and Boundary – Loop Interactions in the {10-12} Twin in Alpha-Zirconium: Anna Serra1; David Bacon2; 1Technical University of Catalonia; 2The University of Liverpool

11:30 AMFlexible Boundary Condition Methods for Interfaces: Dislocation/Twin-Boundary Interactions: Maryam Ghazisaeidi1; Dallas Trinkle1; 1University of Illinois at Urbana-Champaign

11:50 AMThe Behavior of Σ 11, <110> {252}{414} Grain Boundary in Aluminum under Shock Loading by Molecular Dynamics Simulations: Chiara Pozzi1; Timothy Germann2; Donato Firrao1; Richard Hoagland2; 1Politecnico di Torino; 2Los Alamos National Laboratory

12:10 PMMicrostructural Stability and Plastic Deformation in Nanocrystalline Copper Doped with Antimony: Experiments and Molecular Dynamics Simulations: Douglas Spearot1; Rahul Rajgarhia1; Ashok Saxena1; 1University of Arkansas

Surface Engineering for Amorphous-, Nanocrystalline-, and Bio-Materials: Session IIISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS: Surface Engineering CommitteeProgram Organizers: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International Univesity; Sudipta Seal, University of Central Florida; Narendra Dahotre, University of Tennessee


Session Chairs: Indranil Manna, Indian Institute of Technology; Ramki Kalyanaraman, University of Tennessee


8:35 AM InvitedMaterials Research in the Materials and Surface Engineering Program at the National Science Foundation: Clark Cooper1; 1National Science Foundation

9:00 AM InvitedGlass-Forming Metallic Films for Enhancing Mechanical Property of Structural Materials: Cheng-min Lee1; Jinn P. Chu1; Peter K. Liaw2; T. G. Nieh2; 1Nation Taiwan University of Science and Technology; 2The University of Tennessee

9:25 AM InvitedSurface and Bulk Nanostructures for Optical Absorption Enhancement in Thin Si Films: Ritesh Sachan1; J. Strader1; A.W. Paradies1; W. Yueying1; H. Uk1; H. Garcia2; P.D. Rack1; G. Duscher1; R. Kalyanaraman1; 1University of Tennessee-Knoxville; 2Southern Illinois University

9:50 AMFormation of Amorphous Metallic Coatings by the LENSTM Process: Hongqing Sun1; Katharine Flores1; 1The Ohio State University

10:10 AM InvitedFe-Cr-Mo-Y-B-C Bulk Metallic Glass Coating on AISI 4340 Steel by Laser Surface Cladding: Indranil Manna1; S. Harimkar2; Jyotsna Dutta Majumdar1; Manoj Debnath1; N. Dahotre3; 1Indian Institute of Technology Kharagpur; 2Oklahoma State University; 3University of Tennessee

10:35 AM Break

10:50 AMSpark Plasma Sintering of Amorphous Coatings on Metallic Substrate: Ashish Singh1; Sandip Harimkar1; 1Oklahoma State University

11:10 AMSurface Amorphization in “Chromium-on-Silicon” System Resulted by Compression Plasma Action: Vladimir Uglov1; Nikolai Kvasov2; Yury Petukhou2; Valiantsin Astashynski3; Anton Kuzmitski3; 1Belarusian State University; 2Belarusian State University of Informatics and Radioelectronics; 3B.I. Stepanov Institute of Physics, National Academy of Sciences of Belarus

11:30 AMLaser and E-Beam Generated Micro-Nanostructures on the Surface of Amorphous Chalcogenide Layers: Sandor Kokenyesi1; Viktor Takats2; Istvan Chernovich1; Mihail Trunov3; Attila Csik2; Csaba Cserhati1; 1University of Debrecen; 2ATOMKI; 3Uzhgorod National University


68

Technical Program

Tue.

AM

11:50 AMA High Throw Bright Acid Copper for Rack Plating of Printed Circuit Boards: Xiao Faxin1; Shen Xiaoni1; 1Henan University of Science and Technology of China

12:10 PMElectroless Cu Metallization of Carbon Fiber by Precious-Metal Free Process: Che Dehui1; Yao Guangchun1; Liu Kai1; Cao Zhuokun1; 1Institute of Materials and Metallurgy, Northeastern University

Sustainable Materials Processing and Production: Motivating Sustainability IISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Tuesday AM Room: 2BFebruary 16, 2010 Location: Washington State Convention Center

Session Chairs: Christina Meskers, Umicore Precious Metals Refining; Elsa Olivetti, MIT


8:35 AM Keynote Title Not Available: Guido Sonnemann1; 1United Nations Environmental Program (UNEP)

9:00 AM Keynote Title Not Available: Jim Puckett1; 1Basel Action Network

9:25 AMEuropean Recycling Platform – Experiences from a New Venture: Hans Korfmacher1; 1The Procter & Gamble Company

9:50 AM Break

10:05 AM InvitedScarce Metals and Emerging Technologies: Strategies towards a Sustainable Governance: Patrick Wäger1; Daniel Lang2; 1Empa; 2ETH Zürich

10:30 AMLithium-Ion Batteries: Examining Material Demand and Recycling Issues: Linda Gaines1; Paul Nelson1; 1Argonne National Laboratory

10:55 AMCritical and Strategic Failure of Rare Earth Resources: James Kennedy1; 1Wings Enterprises, Inc.

11:20 AMMotivating Sustainable Material Use through Industry-Level Simulation Modeling of Platinum Stocks and Flows: Elisa Alonso1; Richard Roth1; Frank Field1; Randolph Kirchain1; 1MIT

11:45 AMA Collaborative Tool for Waste Management in the Industry: Marisa Borges1; Humberto Riella1; Paulo Janissek2; 1Universidade Federal de Santa Catarina; 2Positivo University


The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Dislocations ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Roman Groger, Academy of Sciences of the Czech Republic; Jeff De Hosson, University of Groningen

8:30 AM InvitedFirst Principles Study of Dislocation Cores and Solute Interactions: Christopher Woodward1; Dallas Trinkle2; Louis Hector3; 1Air Force Research Laboratory; 2University of Illinois, Champaign Urbana; 3General Motors Research and Development Center

8:55 AM InvitedMultiscale Modeling of Cross-Slip: Knowns and Unknowns: Ladislas Kubin1; Benoit Devincre1; 1CNRS

9:20 AMDislocation Nucleation and Re-Ordering of Bicrystal Interfaces: Garritt Tucker1; David McDowell1; 1Georgia Institute of Technology

9:35 AMThermally-Activated Glide of Dislocations at the Atomic Scale in High Peierls Stress Crystals: David Rodney1; Laurent Proville2; 1Grenoble Institute of Technology; 2Commissariat a l’Energie Atomique

9:50 AM InvitedDislocations and Phase Transformations in Energetic Molecular Crystals: Marc Cawkwell1; 1Los Alamos National Laboratory

10:15 AM Break

10:35 AM InvitedDetermination of Dislocation Type by X-Ray Line Profiles: Geza Tichy1; 1Eotvos University, Budapest

11:00 AMThermally Activated Glide of Partial Dislocations in Nickel Based Superalloys: Libor Kovarik1; Raymond Unocic1; Ning Zhou1; Yunzhi Wang1; Michael Mills1; 1The Ohio State University

11:15 AMPredicting Dislocation Mobility from Explicit Atomistic Details: A Kinetic Monte Carlo Study: Mukul Kabir1; Timothy Lau1; David Rodney2; Sidney Yip3; Krystyn Van Vliet1; 1Department of Materials Science and Engineering, Massachusetts Institute of Technology; 2Science et Ingenierie des Materiaux et Procedes, Grenoble Institute of Technology; Department of Materials Science and Engineering, Massachusetts Institute of Technology; 3Department of Nuclear Science and Engineering and Department of Materials Science and Engineering, Massachusetts Institute of Technology

11:30 AMShort Range and Long Range Spatial Correlation Effects on Dislocation Distributions: Juliette Chevy1; Claude Fressengeas2; Mikhail Lebyodkin2; Vincent Taupin2; Pierre Bastie3; Paul Duval4; 1University of Illinois; 2Université Paul Verlaine-Metz-France; 3Institut Laue Langevin; 4Laboratoire de Glaciologie et Géophysique de l’Environnement

11:45 AMFractals versus Scaling: Self-Similarity in Dislocation Cell Wall Simulations: Yong Chen1; Woosong Choi1; Stefanos Papanikolaou1; James Sethna1; 1Cornell University

69

Technical Program

Tue.

AM

Three-Dimensional Materials Science VI: Applications of 3D Microstructural DataSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: Anthony Rollett, Carnegie Mellon University; Andrew Geltmacher, U S Naval Research Laboratory

8:30 AM Invited3D Characterisation of Fatigue Cracks Using X-Ray Tomography: From Synchrotron to Laboratory Sources: Jean-Yves Buffiere1; Nathalie Limodin1; Julien Rethoré1; Wolfgang Ludwig1; Anthony Gravouil1; François Hild2; Stéphane Roux2; 1Universite de Lyon INSA LYON; 2LMT, ENS-Cachan / CNRS / UPMC / PRES UniverSud Paris

9:00 AM InvitedThree-Dimensional Validation of Deformation Simulations: Corbett Battaile1; Luke Brewer1; Remi Dingreville2; 1Sandia National Laboratories; 2Polytechnic Institute of New York University

9:30 AMFinite Element Analysis of Large Three-Dimensional Microstructural Datasets: Alexis Lewis1; M. A. Qidwai2; Surya Kalidindi3; Stephen Niezgoda3; Andrew Geltmacher1; 1Naval Research Laboratory; 2SAIC; 3Drexel University

9:50 AMStagnation of Thin Film Grain Growth under the Effect of Stress: Fatma Uyar1; Myrjam Winning2; Anthony Rollett1; 1Carnegie Mellon University; 2Max Planck Institute für Eisenforschung

10:10 AM Break

10:30 AM InvitedPermeability Determination via 3D Reconstruction of the Mushy Zone of Nickel-Base Single Crystals: Jonathan Madison1; Jonathan Spowart2; Dave Rowenhorst3; Katsuyo Thornton1; Tresa Pollock1; 1The University of Michigan; 2Air Force Research Laboratory; 3Naval Research Laboratory

11:00 AMA Phase Field Model of Dual-Phase Multi-Grain Material Applied to Duplex Steel with Experimental Verification: Stefan Poulsen1; Peter Voorhees2; Erik Lauridsen1; Wolfgang Ludwig3; Richard Fonda4; Dorte Jensen1; 1Risø DTU; 2Northwestern University; 3European Synchrotron Radiation Facility; 4U.S. Naval Research Laboratory

11:20 AMAnisotropic 3D Phase Field Simulations of Grain Growth: A Comparison between Simulation and Experiment: Ian McKenna1; Mogadalai Gururajan2; Stefan Poulsen3; Dave Rowenhorst4; Erik Lauridsen3; Peter Voorhees1; 1Northwestern University; 2Indian Institute of Technology - Delhi; 3Risø; 4Naval Research Laboratory

11:40 AMModeling the Effect of Eutectic Nucleation Behavior on Permeability during Solidification of Al-19.5wt%Cu: Ehsan Khajeh1; Daan Maijer1; 1The University of British Columbia

12:00 PMDealloying and Coarsening Behavior of Nanoporous Gold by X-Ray Nanotomography: Yu-chen Chen1; JaeMock Yi2; Wah-Keat Lee2; Ian McNulty2; Peter Voorhees1; David Dunand1; 1Northwestern Univeristy; 2Advanced Photon Source of Argonne National Lab.

12:20 PMMicrostructures Simulation of Magnesium-Based Alloys during Solidification by Phase-Field Method: Tao Jing1; Mingyue Wang1; 1Tsinghua University

Ultrafine Grained Materials – Sixth International Symposium: Deformation and Processing MechanicsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Gerhard Wilde, University of Muenster; Rainer Hebert, University of Connecticut; Yulia Ivanisenko, Forschungszentrum Karlsruhe; Matthias Hockauf, Chemnitz University of Technology

8:30 AMPlasticity and Grain Boundary Diffusion at Small Grain Sizes: Gerhard Wilde1; Nancy Boucharat2; Sergiy Divinsky1; Joern Leuthold1; Gerrit Reglitz1; Harald Roesner1; 1University of Muenster; 2Research Center Karlsruhe

8:50 AMTwist Extrusion - Technique for Bulk Ultrafine- and Nanomaterials Obtaining: Viktor Varyukhin1; Yakov Beygelzimer1; Sergey Synkov1; 1Donetsk Institute for Physics and Engineering of NASc of Ukraine

9:05 AMPlastic Instability during Accumulative Roll Bonding (ARB) of Metallic Multilayers: Rainer Hebert1; Jyothi Suri1; Girija Marathe1; 1University of Connecticut

9:20 AM InvitedRole of Dislocations during Processing and Deformation of Nanocrystalline Materials: Farghalli Mohamed1; 1University of California, Irvine

9:40 AMHow do Partials Multiply to Produce Deformation Twins in Nanocrystalline fcc Metals?: Yuntian Zhu1; 1North Carolina State University

9:55 AM Break

10:10 AM InvitedDeformation Mechanisms in Multiscale Nanostructured Materials: Yonghao Zhao1; Ying Li1; Troy Topping1; Xiaozhou Liao2; Yuntian Zhu3; Ruslan Valiev4; Enrique Lavernia1; 1University of California-Davis; 2The University of Sydney; 3North Carolina State University; 4Ufa State Aviation Technical University

10:30 AMInformation on Deformation Mechanisms in nc Pd-10% Au Inferred from Texture Analysis: Yulia Ivanisenko1; Werner Skrotzki2; Robert Chulist2; Lilia Kurmanaeva1; Hans-Jörg Fecht3; 1FZK; 2Technische Universität Dresden; 3Universität Ulm

10:45 AM InvitedExtending Kocks’ Equation for Work Softening in UFG Materials: Tamás Ungár1; Li Li2; Géza Tichy1; Hahn Choo2; Peter Liaw2; 1Eötvös University Budapest; 2University of Tennessee

11:05 AMPlastic Deformation in Nanocrystalline and Ultrafine Carbon Steel: Rodolfo Rodríguez-Baracaldo1; Jose Antonio Benito Páramo2; José Maria Cabrera Marrero2; 1Universidad Nacional de Colombia; 2Universitat Politècnica de Catalunya


70

Technical Program

Tue.

PM

11:20 AMMicrostructure and Creep Properties of Nanocrystalline Oxide Dispersion Strengthened Fe-18Cr-8Ni-2W-0.25Y2O3 Austenitic Steel Synthesized by High Energy Ball Milling and Vacuum Hot Pressing: P. Susila1; D. Sturm2; M. Heilmaier3; B. S. Murty1; Vadlamani Subramanya Sarma4; 1Indian Institute of Technology Madras; 2Otto-von-Guericke University Magdeburg; 3TU Darmstadt; 4Indian Institute of Technology Madras and North Carolina State University

11:35 AM InvitedPlastic Flow Stability and Detwinning in Cu with Nanoscale Growth Twins: Amit Misra1; X. Zhang2; J. Wang1; N. Li3; O. Anderoglu3; J. Huang4; R. Hoagland1; J. Hirth1; 1LANL; 2Texas A&M University; 3Texas A&M University & LANL; 4Sandia National Laboratories

11:55 AMProcessing and Oxidation Resistance of Nanocrystalline Fe-Cr Alloys: Rajeev Gupta1; Raman Singh1; Carl Koch2; 1Monash University; 2North Carolina State University

Ultrafine Grained Materials – Sixth International Symposium: StabilitySponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Kristopher Darling, U.S. Army Research Laboratory; Brady Butler, U.S. Army Research Laboratory; Christopher Saldana, Purdue University; Jane Adams, U.S. Army Research Laboratory

8:30 AM InvitedThermal Stability of SPD Microstructures: Günter Gottstein1; Xenia Molodova1; 1RWTH Aachen University

8:50 AMMechanical Properties of Nanocrystalline Aluminum Stabilized with Dimondoids: Khinlay Maung1; Ali Yousefiani2; Farghalli Mohamed1; James Earthman1; 1UCI; 2The Boeing Company

9:05 AMCharacterization of Thermally Stable Nanocrystalline Nickel Powders: Brady Butler1; Kristopher Darling1; Bradley Klotz1; Matthew Kelly1; Micah Gallagher1; Eric Klier1; 1U.S. Army Research Laboratory

9:20 AM InvitedRoom Temperature Instability of Super Saturated Solid Solution in a Nano Crystalline Al-4Cu Alloy Produced by SPD: Phil Prangnell1; Joe Robson1; Yan Huang1; 1The University of Manchester

9:40 AMCharacterizing Ultrafine Grained Ti-6Al-4V Thermal Stability with Long-Term High-Resolution EBSD: Andrew Deal1; Radhakrishna Bhat1; Richard DiDomizio1; Judson Marte1; PR Subramanian1; 1GE Global Research

9:55 AM InvitedMicrostructural Stability and Damage Evolution in Ultra-Fine Grained Alloys under Cyclic Loading: Thomas Niendorf1; Hans Maier1; Ibrahim Karaman2; 1University of Paderborn; 2Texas A&M University

10:15 AM Break

10:30 AM InvitedStability of Nanocrystalline Alloys: Christopher Schuh1; 1MIT

10:50 AMThermal Stability of Ultra-Fine Grained Ti-6Al-4V Alloys Processed via Multi-Axis Forging: Radhakrishna Bhat1; Andrew Deal1; Richard Didomizio1; Judson Marte1; Subramanian PR1; 1GE Global Research Center

11:05 AMGrain Growth Kinetics of Thermally Stabilized Nanocrystalline Fe-Alloys: Kris Darling1; Brian Schuster1; Brady Butler1; Suveen Mathaudhu1; Laszlo Kecskes1; 1ARL

11:20 AM InvitedElemental Redistribution Induced by High-Pressure Torsion in Alloys: Xiaozhou Liao1; Song Ni1; Yanbo Wang1; Gang Sha1; Simon Ringer1; Terence Langdon2; Yuntian Zhu3; 1The University of Sydney; 2University of Southern California; 3North Carolina State University

11:40 AMEngineering Stored Energy in Ultra Fine Grained Metals Created by Severe Plastic Deformation: M. Ravi Shankar1; Shashank Shekhar1; Jiazhao Cai1; 1University of Pittsburgh

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Synthesis of Nanomaterials IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Tuesday PM Room: 214February 16, 2010 Location: Washington State Convention Center

Session Chair: Jiyoung Kim, University of Texas - Dallas; David Stollberg, Georgia Tech Research Institute


2:05 PM InvitedNanowires of Phase Change Materials for Memory Applications: Jeong-Soo Lee1; Chan Hoon Park1; Jung Hyun Cho1; Ki Hyun Kim1; Yoon-Ha Jeong1; Meyya Meyyappan2; 1National Center for Nanomaterials Technology; 2NASA Ames Research Center

2:25 PMEffects of Process Parameters of ALD on High-k Dielectric Deposition on HOPG for Graphene Based Nanoelectronics: Greg Mordi1; Bongki Lee1; Jiyoung Kim1; 1University of Texas at Dallas

2:45 PMDual-Gated Graphene Devices with High-k Dielectric Using Ozone-Based Atomic Layer Deposition (ALD): Bongki Lee1; Greg Mordi1; Jiyoung Kim1; 1University of Texas at Dallas

3:05 PMThe Interface Characteristics and the Electrical Properties of ZnO/ITO/ZnO Nano Thin Films: Hung Fei-Yi1; K. J. Chen2; S. J. Chang2; Z. S. Hu2; Y. T. Chen1; 1Institute of Nanotechnology and Microsystems Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University; 2Institute of Microelectronics and Department of Electrical Engineering; Center for Micro/Nano Science and Technology, National Cheng Kung University

3:25 PMNanotube Grafting on Porous Solids for Multifunctional Applications: Sharmila Mukhopadhyay1; 1Wright State University

3:45 PM Break

71

Technical Program

Tue.

PM

4:00 PMSynthesis and Surface Roughening of CoSb3 Nanowires by Electrochemical Methods: Dat Quach1; Ruxandra Vidu1; Pieter Stroeve1; Joanna Groza1; 1University of California, Davis

4:20 PMIntermediate Composition of at wt. % Mn/Ni in Amorphous, Nano or Microcrystalline Alloy Films of Fe-Mn or Fe-Ni Deposited from Aqueous Solution of Simple Salt Bath: Bassey Udofot1; 1NASA/Goddard Space Flight Center

4:40 PMControlling Composition at the Individual FePt Nanoparticle Level: Chandan Srivastava1; David Nikles1; Gregory Thompson1; 1University of Alabama

5:00 PMChemical Vapour Synthesis of Boron Modified Nanocrystalline Anatase Titania for Photocatalytic Applications: Imteyaz Mohammad1; Subramshu Bhattacharya1; Horst Hahn2; 1IIT Madras; 2Technische Universität Darmstadt


Advances in Composite, Cellular and Natural Materials: Metal Matrix CompositesSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: Xiaodong Li, University of South Carolina; T. Venkatesh, Stony Brook University

2:00 PMFabrication of Al6061-SiC Composite by a Novel Semisolid Powder Processing: Yufeng Wu1; Gap-Yong Kim1; Iver Anderson2; Thomas Lograsso2; 1Iowa State University; 2Ames Laboratory of US DOE

2:20 PMCompressive Properties of Closed-Cell Aluminum Foams Reinforced with Fly Ash Particles: Yong Liang Mu1; Guang Chun Yao1; Hong Jie Luo1; 1Northeasten University

2:40 PMFabrication of Carbon Nano-Fiber (CNF) Reinforced Aluminum Matrix Composites by Pressureless Infiltration: Effect of Aluminum Coatings on Infiltration Behavior: Fumio Ogawa1; Tatsuya Hirakawa2; Minoru Oda1; Chitoshi Masuda3; Toshiyuki Nishimura4; 1Graduate school of Waseda University; 2Waseda University; 3Kagami Memorial Institute for Materials Science and Technology, Waseda University; 4National Institute for Materials Science

3:00 PMUn-Bundled Carbon Nanotubes Reinforced Titanium Composites via Powder Metallurgy Process: Katsuyoshi Kondoh1; Thotsaphon Threrujirapapong1; Hisashi Imai1; Junko Umeda1; Bunshi Fugetsu2; 1Osaka University; 2Hokkaido University

3:20 PMFabrication of High Strength Pure Ti Matrix Composite Reinforced with Carbon Black Particle via Wet Process: Thotsaphon Threrujirapapong1; Katsuyoshi Kondoh2; Hisashi Imai2; Junko Umeda2; Bunshi Fugetsu3; 1Graduate School of Enginering, Osaka University; 2Osaka University; 3Hokkaido University

3:40 PM Break

4:00 PMLoad Partitioning in Al2O3-Al Composites with Three-dimensional Periodic Architecture: Marcus Young1; Ranjeet Rao2; Jon Almer3; Dean Haeffner3; Jennifer Lewis2; David Dunand1; 1Department of Materials Science and Engineering, Northwestern University; 2Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign; 3Advanced Photon Source, Argonne National Laboratory

4:20 PMBulk Metallic Glass Composites: A New High-Performance Structural Material: Douglas Hofmann1; Maximilien Launey2; Robert Ritchie3; William Johnson4; 1Liquidmetal Technologies; 2Lawrence Berkeley National Laboratory; 3University of California Berkeley; 4California Institute of Technology

4:40 PMCreep and In-situ TEM Investigations of Short Fiber Reinforced Metal Matrix Composites: Deniz Kurumlu1; Marcus Young1; Antonin Dlouhy2; Gunther Eggeler1; 1Ruhr Universitaet; 2Institute of Physical Metallurgy, Academy of Sciences of the Czech Republic

5:00 PMCreep Behavior of Aluminum Based Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes: Hyunjoo Choi1; Jaehyuck Shin1; Donghyun Bae1; 1Yonsei University

5:20 PMMicrostructural Evaluation of ZrC Reinforced Al–Cu Matrix Alloy Composites Fabricated by Mechanical Alloying and Vacuum Hot Pressing: Hulya Kaftelen1; Necip Unlu1; Mustafa Ovecoglu1; Hani Henein2; 1Istanbul Technical University; 2University of Alberta

Alumina and Bauxite: Process Improvements and Experiences - Red Side ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Austin Mooney, Sherwin Alumina


2:10 PMStudy on Ore Dressing and Characterization of Different Granulometric Fractions that Compound Bauxite from Pará/Brazil: Fernanda Silva1; Rachel Santos1; João Sampaio2; Francisco Garrido3; Marta Medeiros3; 1IQ/UFRJ - CETEM; 2CETEM; 3IQ/UFRJ

2:40 PMAutoclave Desilication of Digested Bauxite Slurry in the Flashing Circuit: Andrey Panov1; Alexander Suss1; Irina Paromova1; Alexander Damaskin1; 1RUSAL VAMI

3:10 PMBauxite Grinding Practices and Options: Anthony Filidore1; John Hadaway1; 1FLSmidth Minerals

3:40 PM Break

4:00 PMThe Effect of Anatase and Lime on the Transformation of Sodalite to Cancrinite in Bayer Digestion at 250°C: Bingan Xu1; Peter Smith1; Christine Wingate1; Lynette De Silva1; 1CSIRO Minerals

4:30 PMStudy on the Rheological Behavior of Crystallized and Crystallized - Amorphous Bauxites: Carla Barbato1; Silvia França2; Marcio Nele3; 1UFRJ/CETEM; 2Cetem; 3EQ/UFRJ


72

Technical Program

Tue.

PM

Aluminum Alloys: Fabrication, Characterization and Applications: Materials CharacterizationSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: Zhengdong Long, Kaiser Aluminum

2:00 PMStructure Evolution and Recrystallization in 7xxx Series Al Alloys: Jameson Root1; David Field1; 1Washington State University

2:20 PMQuantification of Marine Aluminum Alloy Sensitization Based upon Thermal Loading: William Golumbfskie1; Catherine Wong2; 1Naval Surface Warfare Center, Carderock Division; 2NAVSEA

2:40 PMInfluence of Grain Boundary Sliding on the Ductility of Ultrafine-Grained Al: Yonghao Zhao1; John F. Bingert2; Ying Li1; Peiling Sun3; Xiaozhou Liao4; Yuntian Zhu5; Enrique Lavernia1; 1University of California-Davis; 2Los Alamos National Lab; 3Feng Chia University; 4The University of Sydney; 5North Carolina State University

3:00 PMTransmission Electron Microscopic Investigation of Sensitized Al-5083: Ramasis Goswami1; George Spanos2; Peter Pao2; Ronald Holtz2; 1SAIC/Naval Research Laboratory; 2Naval Research Laboratory

3:20 PMMicrostructure Evolution of Pre-Strained 3xxx Aluminum Alloys during Annealing: Payman Babaghorbani1; Nick Parson2; Mary Wells3; Warren Poole1; 1The University of British Columbia; 2Rio Tinto Alcan, Arvida Research and Development Centre; 3University of Waterloo

3:40 PMCharacterization of Hypereutectic Al-19%Si Alloy Solidification Process Using In-Situ Neutron Diffraction and Thermal Analysis Techniques: Wojciech Kasprzak1; Dimitry Sediako2; Mahi Sahoo1; Michael Walker1; 1CANMET Materials Technology Laboratory; 2National Research Council Canada

4:00 PM Break

4:15 PMCharacterization of the Spacing Selection in AlCu Alloys: Sebastian Gurevich1; Morteza Amoorezaei1; Nikolas Provatas1; 1McMaster University

4:35 PMDevelopment of Al-Si Alloy by Optimizing Modifiers and Grain Refiners: Saeed Farahany1; Ali Ourdjini1; Mohd Hasbullah Idris1; 1UTM University

4:55 PMPatterning Surface Precipitation in Al-Cu Alloys via Localized Loading: Jack Franklin1; Jennifer Lukes1; 1University of Pennsylvania

5:15 PMRefinement of Hypereutectic Al-Si Alloy by Ca3P2: Ying Zhang1; Wangxing Li1; Danqing Yi2; Zhiseng Ren1; Xianghui Cang1; Jianhong Yang1; 1Zhengzhou Research Institute of CHALCO; 2Central South University

Aluminum Reduction Technology: Hall-Héroult Cell: Energy Conservation Through Cell Design and Process ImprovementsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chair: William Imrie, Bechtel Corporation


2:05 PMWettable Athodes: An Update: Rudolf Pawlek1; 1TS+C

2:30 PMWettability of Liquid Aluminum on Carbon/Graphite/TiB2 Composite Cathode Materials: Jilai Xue1; Xing Chen1; 1University of Science and Technology Beijing

2:55 PMStudy on the New Reduction Technology for Energy Saving: Fengqin Liu1; Songqing Gu1; 1Chalco

3:20 PMEffect of Atmosphere-Changing Sintering on the Corrosion Resistance of 17Ni/(10nio-Nife2O4) Cermet Inert Anode: Liu Kai1; Tian Zhongliang1; Li Jie1; Lai Yanqing1; Zhang Hongliang1; Lü Xiao-jun1; 1School of Metallurgical Science and Engineering, Central South University

3:45 PM Break

3:55 PMLiquidus Temperatures of Cryolite Melts with Low Cryolite Ratio: Alexei Apisarov1; Alexander Dedyukhin1; Elena Nikolaeva1; Pavel Tin’ghaev1; Olga Tkacheva1; Alexander Redkin1; Yurii Zaikov1; 1Institute of High Temperature Electrochemistry

4:20 PMIndustrial Test of Low-Voltage Energy-Saving Aluminum Reduction Technology: Li Jie1; Lü Xiao-jun1; Lai Yan-qing1; Xie Chang-chun2; Zhang Hong-liang1; Xiao Jin1; Ding Feng-qi1; Liu Shi-wen3; Guo Qi-feng3; Li Yun-long3; 1School of Metallurgical Science and Engineering, Central South University; 2Hunan Zhongda Yexiang Technology Co., Ltd; 3Qiya Aluminum (Group) Co, Ltd

4:45 PMNew Cathodes in Aluminum Reduction Cells: Feng Naixiang1; Tian Yingfu2; Peng Jianping1; Wang Yaowu1; Qi Xiquan3; Tu Ganfeng3; 1Northeastern University; 2Chongqing Tiantai Aluminum Industry Co., Ltd.; 3Northeastern University Engineering and Research Institute Co. Ltd.

5:10 PMCalculation of the Aluminum Flow Field at the Interface of Molten Aluminum and Electrolyte in the New Cathode Aluminum Cells: Jiang Yanli1; Peng Jianping1; Feng Naixiang1; Wang Yaowu1; Qi Xiquan2; 1Northeastern University; 2Northeastern University Engineering and Research Institute Co. Ltd.


73

Technical Program

Tue.

PM

Biological Materials Science: Mechanical Behavior of Biological Materials II: Hard Tissues and their Replacement MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University



2:00 PM InvitedStructural Mechanisms for the Inelastic Deformation of Haversian Bone: Rizhi Wang1; Vincent Ebacher1; 1University of British Columbia

2:30 PMThe Mixed-Mode Fracture of Human Cortical Bone: Elizabeth Zimmermann1; Maximilien Launey1; Holly Barth1; Robert Ritchie1; 1Lawrence Berkeley National Laboratory and The University of California at Berkeley

2:50 PMLooking at the Effects of Radiation Doses on the Fracture Toughness of Human Cortical Bone: Holly Barth1; Alastair MacDowell2; Maximilien Launey2; Robert Ritchie1; 1Lawrence Berkeley National Laboratory and University of California, Berkeley; 2Lawrence Berkeley National Laboratory

3:10 PMMicroscale Uniaxial Compression Testing of Bone Tissue Specimens: Katrina Altman1; Stacey Vansickle1; Elise Morgan2; Katharine Flores1; 1The Ohio State University; 2Boston University

3:30 PMNanomechanics of Tropocollagen and Hydroxyapatite Biomaterials with an Account of Collagen Mutations and Varied Hydroxyapatite Textures: Devendra Dubey1; Vikas Tomar1; 1Purdue University

3:50 PM Break

4:00 PM InvitedFracture Processes and Mechanisms of Crack Growth Resistance in Human Enamel: D Bajaj1; Dwayne Arola1; 1University of Maryland Baltimore County

4:30 PMInterfacial Failure of Dentin Adhesively Bonded to Quartz-Fiber Reinforced Epoxy: Renata Melo1; Nima Rahbar2; Wole Soboyejo1; 1Princeton University; 2University of Massachusetts Dartmouth

4:50 PMStructure and Mechanical Properties of Cementum Biocomposites: Hanson Fong1; Mustafa Gungormus1; Biran Foster1; Martha Somerman1; Candan Tamerler1; Mehmet Sarikaya1; 1University of Washington

5:10 PMFabrication and Mechanical Properties of Calcium Phosphate Cements (CPC) for Bone Substitution: Jingtao Zhang1; Franck Tancret1; Jean-Michel Bouler1; 1Université de Nantes

5:30 PMTricalcium Phosphates with Srontium Oxide and Zinc Oxide Dopants for Resorbable Bone Grafts: Johanna Feuerstein1; Shashwat Banerjee1; Susmita Bose1; Amit Bandhyopadhyay1; 1Washington State University

5:50 PMBiomimetic Chitosan-Based Nanocomposite Scaffolds for Bone Tissue Engineering: Wah Wah thein-Han1; Devesh Misra1; 1University of Louisiana

Bulk Metallic Glasses VII: Alloy Development and Application IISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: Katharine Flores, The Ohio State University; Jan Schroers, Yale University

2:00 PM InvitedProcessing of Bulk Metallic Glass: Jan Schroers1; 1Yale University

2:20 PMDevelopment of Ti-Based Bulk Glassy Matrix Composites with Excellent Mechanical Performance: Jin Man Park1; Norbert Mattern1; Ka Ram Lim2; Do Hyang Kim2; Jürgen Eckert1; 1Leibniz Institute for Solid State and Materials Research Dresden; 2Yonsei University

2:30 PM InvitedTowards a New Class of Biodegradable Implants: Mg-Based Glasses with No Hydrogen Evolution: Jörg Löffler1; Peter Uggowitzer1; Bruno Zberg1; 1ETH Zurich

2:50 PMSolute Substitution Induced Changes in Structure and Nucleation in an Al-Based Metallic Glass: Feng Yi1; Paul Voyles1; Seth Imhoff1; John Perepezko1; 1UW-Madison

3:00 PM InvitedFormation and Characterization of Individual Metallic Glassy Nanowire: Koji Nakayama1; Yoshihiko Yokoyama1; Takahito Ono1; Mingwei Chen1; Kotone Akiyama1; Toshio Sakurai1; Akihisa Inoue1; 1Tohoku University

3:20 PM InvitedRole of Ductile β-Phase Dendrite in Optimizing Mechanical Properties of Ti-Based Bulk Metallic Glass Composites: Ka Ram Lim1; Jin Man Park1; Won Tae Kim2; Do Hyang Kim1; 1Yonsei University; 2Cheongju University

3:40 PM Break

3:50 PM InvitedDuctile Hypoeutectic Zr-Cu-Al and Zr-Ni-Cu-Al Bulk Glassy Alloys: Y. Yokoyama1; K. Fujita2; T. Yamasaki3; A. Yavari4; P. Liaw5; A. Inoue1; 1Institute for Materials Research; 2Department of Mechanical Engineering; 3School of Engineering; 4LTPcSIMAP-CNRS; 5The University of Tennessee

4:10 PMOn Interfacial Bonding in Mg-Cu-Gd Metallic Glass during Spark Plasma Sintering Processing: Baolong Zheng1; Troy Topping1; Yizhang Zhou1; Chi Y.A. Tsao2; Enrique Lavernia1; 1University of California, Davis; 2National Cheng Kung University

4:20 PMEffect of Heat Treatment at Semisolid Region on Zr-Based Metallic Glass Matrix Composites: Takuya Tamura1; Advenit Makaya1; Kenji Miwa1; 1National Institute of Advanced Industrial Science and Technology (AIST)

4:30 PM InvitedImproving the Deformation Ability of Bulk Metallic Glasses by Different Approaches: Ke-Fu Yao1; Sheng-Bao Qiu1; Yang Li1; Hong-Yu Ding1; 1Tsinghua University

4:50 PMThermodynamic Optimization of the Cu-Zr-Ag System and Its Applications to Amorphous Alloy Development: Dae Hoon Kang1; In-Ho Jung1; 1McGill University


74

Technical Program

Tue.

PM

5:00 PM InvitedStudy of Microscopic Deformation Behaviors of Bulk Metallic-Glasses: Yong Yang1; J. Lu1; J.C. Ye1; 1The Hong Kong Polytechnic University

5:20 PM InvitedCooling Process and Cast Structure of Zr-Al-Ni-Cu-Based Bmgs Produced in Various Atmospheres: Junji Saida1; Albertus Setyawan1; Hidemi Kato1; Mitsuhide Matsushita2; Akihisa Inoue1; 1Tohoku University; 2JEOL. Co., Ltd

5:40 PM InvitedRecent Progress in High-Entropy Alloys: Jien-Wei Yeh1; Ming-Hung Tsai1; 1National Tsing Hua University

Cast Shop for Aluminum Production: Furnace Technology and Melt HandlingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: John Grandfield, Grandfield Technology Pty Ltd; Pierre Le Brun, Alcan Voreppe Research Center


Session Chair: Peter Whiteley, Munimula

2:00 PMInfluence of Heating Technology on Melt Quality in Ladles for Road Transportation of Liquid Aluminum Casting Alloys during Holding: Bernd Prillhofer1; Jens Knaack1; 1AMAG Casting GmbH

2:25 PMDegreasing of Aluminium Turnings and Implications for Solid-State Recycling: Jirang Cui1; Anne Kvithyld2; Hans Roven1; 1Norwegian University of Science and Technology; 2SINTEF Materials and Chemistry

2:50 PMRetrofitting Aluminum Melting Furnaces: Tom Schmidt1; 1Otto Junker

3:15 PMEstablishing Operational Parameters of AL-EMS Using Numerical Simulations to Promote Energy Efficiency during Final Heating in Aluminum Furnaces: Robert Stal1; Ulf Sand1; Olof Hjortstam1; 1ABB AB

3:40 PMEnergy Efficiency in Casthouse Furnaces: Robert Voyer1; Francis Caron2; 1Hatch; 2Alcoa

4:05 PMImplementation of a Global Casthouse Furnace Energy Efficiency Program at Rio Tinto Alcan: Mathieu Roy1; Vincent Goutiere1; Claude Dupuis1; 1Rio Tinto Alcan

4:30 PMCrucible Transfer by Siphoning: A Review of the Benefits and the Latest Technology: Jerry Locatelli1; Guangwei Liu2; Andrew North2; 1Millennium Metals Pty Ltd; 2Major Furnace Australia Pty Ltd

4:55 PMHeating and Melting of Single Al Ingots in an Aluminium Melting Furnace: Jørgen Furu1; Andreas Buchholz2; Trond Harald Bergstrøm3; Knut Marthinsen1; 1NTNU; 2Hydro Aluminium Deutschland GmbH; 3SINTEF Materials and Chemistry

5:20 PMOptimised Re-Melting by the Use of Low-Temperature Oxyfuel at Hydro Aluminium’s Primary Aluminium Casthouse, Övre Årdal, Norway: Henrik Gripenberg1; Ken Torvanger2; Johannes Lodin1; 1Linde Gases Division; 2Hydro Aluminium

Characterization of Minerals, Metals and Materials: Characterization of Grain Size, Morphology, Transmittance, and TomographySponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Shadia Ikhmayies, University of Jordan; Mingdong Cai, Exova


2:35 PMA Statistical Study of Grain Size, Grain Orientation, and Grain Boundary Misorientation Effects on Deformation Twinning: Rodney McCabe1; Irene Beyerlein1; Laurent Capolungo2; Peter Marshall2; Carlos Tome1; 1Los Alamos National Laboratory; 2Georgia Tech

3:00 PMAn Automated Approach for Prior Austenite Grain Size Measurement by EBSD: Ning Ma1; Russell Mueller1; Timothy Anderson2; Raghavan Ayer1; 1Corporate Strategic Research, ExxonMobil Research and Engineering Company; 2ExxonMobil Upstream Research Company

3:25 PMLinear Measures for Estimating Grain Growth Rates: Martin Glicksman1; Paulo Rios2; Daniel Lewis3; 1University of Florida; 2Universidade Federal Fluminense; 3Rensselaer Polytechnic Institute

3:50 PMSerial Sectioning, X-Ray Tomography, and EBSD Analyses of Martensitic Alloys: George Spanos1; David Rowenhorst1; Richard Fonda1; Keith Knipling1; Richard Everett1; Greg Olson2; Stephanie Chan2; 1Naval Research Laboratory; 2Northwestern University

4:15 PMComputed Tomography of Titanium Friction Stir Welds: Jennifer Wolk1; Richard Everett2; Lourdes Salamanca-Riba3; 1Naval Surface Warfare Center; 2Naval Research Laboratory; 3University of Maryland

4:40 PMAberration-Corrected Vector Field Electron Tomography of Magnetic Nano-Structures: Charudatta Phatak1; Emma Humphrey1; Amanda Petford-Long2; Marc De Graef1; 1Carnegie Mellon Unversity; 2Argonne National Laboratory

5:05 PMUsing Transmittance Measurements to Investigate the Interdiffusion through the SnO2/CdS and CdS/CdTe interfaces in SnO2/CdS/CdTe Solar Cells: Shadia Ikhmayies1; Riyad Ahmad-Bitar1; 1University of Jordan

5:30 PMThe Effect of Aluminum Content on Morphology, Size, Volume Fraction and Number of Graphite Nodules in Ductile Cast-Iron: Ali-Reza Kiani-Rashid1; A Shayesteh-Zeraati2; H Naser-Zoshki3; 1Ferdowsi University of Mashhad; 2Sharif University of Technology; 3Iran University of Science and Technology, Tehran,

5:55 PMCharacterization of the Deep Interface Traps in Hf-Based/Si Gate Stacks: S.Y. Tan1; Yi-Lun Hsia1; Ming-Yuan Wu1; Hsing-Hung Chen1; 1Chinese Culture University

6:15 PMArsenic Dopant Effect in Nickel Silicide Formation for NiSi/Hf-Based/Si Gate Stacks: S.Y. Tan1; 1Chinese Culture University

75

Technical Program

Tue.

PM



Coatings for Structural, Biological, and Electronic Applications: Applications of Coatings IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS: Thin Films and Interfaces CommitteeProgram Organizers: Nuggehalli Ravindra, New Jersey Institute of Technology; Gregory Krumdick, Argonne National Laboratory; Roger Narayan, Univ of North Carolina & North Carolina State Univ; Choong-un Kim, University of Texas at Arlington; Nancy Michael, University of Texas at Arlington


Session Chair: Nuggehalli Ravindra, NJIT


2:10 PM InvitedExperimental Study of Ternary Cobalt Spinal Oxides for Photoelectrochemical Hydrogen Production: Sudhakar Shet1; Kwang-Soon Ahn2; Heli Wang1; Nuggehalli Ravindra3; Yanfa Yan1; John Turner1; Mowafak Al-Jassim1; 1National Renewable Energy Laboratory; 2YeungNam University; 3New Jersey Institute of Technology

2:40 PMEffect of Superficially Applied Y2O3 Coating on High Temperature Corrosion Behaviour of Ni-Base Superalloys: Gitanjaly G1; Harpreet Singh2; Satya Prakash2; Surendra Singh2; 1National Institute of Technology; 2Indian Institute of Technology

3:00 PMSemiconductor Device Integration Utilizing Magnetic Films: Rene Rivero1; Michael Booty1; Anthony Fiory1; Nuggehalli Ravindra1; 1New Jersey Institute of Technology

3:20 PMCrystallization and Thermal Stability of Amorphous and Nanocrystalline TiO2 Magnetron-Deposited Thin Films Studied by X-Ray Diffraction: Radomir Kuzel1; Zdenek Matej1; Lea Nichtova1; Jindrich Musil2; 1Charles University in Prague, Faculty of Mathematics and Physics; 2University of West Bohemia, Faculty of Applied Sciences

3:40 PM Break

3:55 PM InvitedSpin Coated Er-Doped SiO2 for High Efficiency Waveguide Optical Amplifiers: Sufian Abedrabbo1; Bashar Lahlouh1; Anthony T. Fiory2; Nuggehalli Ravindra2; 1University of Jordan; 2NJIT

4:25 PMStellite Coatings on Hot Work Tool Steels for Tooling Applications in Semi-Solid Processing of Steels: Agca Kayihan1; Yucel Birol1; Kemal Demirci2; 1Tubitak Mam; 2Kobatek Surface Treatment Industry

4:45 PMPhase Change Materials – An Overview: Maneesh Merwade1; Vishal K. Singh1; Arun Ramadass1; Nuggehalli Ravindra1; 1New Jersey Institute of Technology

5:05 PM InvitedOrganic Coatings to Prevent Molten Metal Explosions: Alex Lowery1; Joe Roberts2; 1Wise Chem LLC; 2Pyrotek Inc.

5:35 PMDiaphragm Coatings to Enhance Performance of Fabry-Perot Sensors: Ivan Padron1; Anthony Fiory1; Nuggehalli M Ravindra1; 1NJIT

Computational Thermodynamics and Kinetics: Wetting Phenomena IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign



2:00 PM InvitedPrefreezing at Heterogeneous Solid-Liquid Interfaces: Brian Laird1; Ruslan Davidchack2; 1University of Kansas; 2University of Leicester

2:30 PM InvitedThinning, Instability and Rupture of Thin Liquid Films in Metal Foam: Lucien Brush1; 1University of Washington

3:00 PMSimulating Surface Energy Anisotropy Using Extended Cahn-Hilliard Model: Solmaz Torabi1; ZhengZheng Hu1; John Lowengrub1; 1University of California Irvine

3:20 PM Break

3:30 PM InvitedNanoscale Quasi-Liquid Interfacial Films: The Interplay of Premelting, Prewetting and Multilayer Adsorption: Jian Luo1; 1Clemson University

4:00 PMInfluence of Local Interface Phenomenon on Coalescence Kinetics Models in Ni-Base Alloys: Youhai Wen1; Jeff Simmons2; Chris Woodward2; 1UES, Inc; 2AFRL

4:20 PMMicrostructure Engineering via Throttled Nucleation: David Wu1; Jerry Quek1; Kevin Chu1; 1Institute of High Performance Computing

4:40 PMPhase Field Modeling of Void Microstructure Evolution in Irradiated Metals: Srujan Rokkam1; Santosh Dubey1; Anter El-Azab1; Paul Millett2; Dieter Wolf2; 1Florida State University; 2Idaho National Laboratory

5:00 PMMonte Carlo Potts Simulation of Strain Induced Sub-Grain Structure Formation: Corentin Guebels1; Tien Tran1; Phi Thanh1; Joanna Groza1; Jean-Pierre Delplanque1; 1University of California, Davis

5:20 PMUsing Size Distributions for Determining Growth Mechanisms of Grain Boundary Precipitates: Shirley Northover1; 1The Open University

5:40 PMGenetic Alloy Design by Nanoprecipitate Control: Stainless Steels and Aluminium Alloys: Pedro Rivera-Diaz-del-Castillo1; 1University of Cambridge


76

Technical Program

Tue.

PM

Cost-Affordable Titanium III: Powder Consolidation and Properties IISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: Ramana Reddy, University of Alabama; Kevin Dring, Norsk Titanium AS

2:00 PMMicrowave Sintering and Melting of Titanium Powder for Low-Cost Processing: Ralph Bruce1; Arne Fliflet2; Hugo Huey3; Chad Stephenson1; M. Ashraf Imam2; 1Bethel College; 2Naval Research Laboratory; 3HWave, LLC

2:25 PMMicrowave Sintering of Titanium: Ma Qian1; Shudong Luo1; Ming Yan1; Graham Schaffer1; 1The University of Queensland

2:50 PMReaction Assisted Ultrasonic Consolidated TiNi: Henry Rack1; Mykola Kulakov1; Erica Sampson1; 1Clemson University

3:15 PMProperties of Conventionally Alloyed and Powder Alloyed Nano-Crystalline Titanium Consolidated Via Spark Plasma Sintering: Christopher Melnyk1; Steven Schroeder1; David Grant1; Robert Gansert2; 1California Nanotechnologies; 2Advanced Materials and Technology Services

3:40 PM Break

3:55 PMFabrication of Ultrafine/Nanostructued Ti-TiN/TiC Matrix Composites Using Low-Temperature Back Pressure Equal Channel Angular Pressing: Wei Xu1; Xiaolin Wu1; Haowen Xie1; Jizhong Li1; Kenong Xia1; 1University of Melbourne

4:20 PMStress-Corrosion Cracking and Fatigue Crack Growth Behavior of Ti-6Al-4V Plates Consolidated from Low Cost Powders: Peter Pao1; M. Ashraf Imam1; Robert Bayles1; C.R. Feng1; 1Naval Research Laboratory

4:45 PMSintering Behavior of TiH2 for Manufacturing of Titanium Alloys and Products: Zhigang Fang1; Hongtao Wang1; Shuming Fang2; Jiamin Zhang2; 1University of Utah; 2CYMCO

5:10 PMStructure Formation during Preparation of Variable Porosity Ti Foams by Solid State Replication: Yu. Orlova1; K. Maekawa1; Henry Rack2; 1Kyoto University; 2Clemson University

5:35 PMProduction of a Low-Cost DMD Wire Feedstock by Direct Consolidation of Ti Sponge: Kevin Dring1; Martin Lefstad2; Ola Jensrud3; 1Norsk Titanium; 2SINTEF - Materials and Chemistry; 3Sintef Raufoss Manufacturing

Electrode Technology for Aluminum Production: Traditional and Inert Anode MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Jilai Xue, Unversity of Science and Technology Beijing


2:05 PMHigher Softening Point Pitch as Anode Binder Pitch: Robert Wombles1; Stacey McKinney1; Thomas Golubic1; Kathryn Sickels1; 1Koppers Inc.

2:25 PMStudy of Resistivity – Real Density Correlation in CPC Calcination Control: Oscar Mascarenhas1; Arun Mathur1; Jose Botelho1; 1Goa Petcoke Consultancy Services

2:45 PMThe Comparison between Vertical Shaft Furnace and Rotary Kiln for Petroleum Coke Calcination: Yi Sun1; Haifei Xu1; Yubin Wang1; Yinhe Cui1; Chaodong Liu1; 1Shenyang Aluminum and Magnesium Engineering and Research Institute

3:05 PMPrebaked Anode from Coal - Utilization of Coal Extract as a Coke Feedstock: Maki Hamaguchi1; Noriyuki Okuyama1; Nobuyuki Komatsu1; Jiro Koide2; Keisuke Kano2; 1Kobe Steel, Ltd.; 2Sumitomo Corporation

3:25 PMCharcoal in Anodes for Aluminium Production: Bodil Monsen1; Arne Ratvik1; Lorentz Lossius2; 1SINTEF Materials and Chemistry; 2Hydro Aluminium - PM Technology

3:45 PM Break

4:00 PMBall-Milled Materials as Inert Anodes for Aluminum Production in KF-Alf3 Low-Temperature Electrolyte: Sébastien Helle1; Benoit Brodu1; Boyd Davis2; Daniel Guay1; Lionel Roue1; 1INRS EMT; 2Kingston Process Metallurgy Inc.

4:20 PMCorrosion Behaviors of NiFe2O4-NiO-Co3O4 Inert Anodes Materials in Na3AlF6-Al2O3 Melts: Jilai Xue1; Tao Zeng1; Jun Zhu1; 1University of Science and Technology Beijing

4:40 PMEffect of Sintering Parameters on Properties of 18NiO-17(Cu-Ni)-65NiFe2O4 Composite Ceramic Anode: Jia Ma1; Yao Guang Chun1; Bao Li1; Zhang Xiao1; Ma Jun Fei1; 1Northeastern University

5:00 PMResearch on Preparation and Properties of 18NiO-NiFe2O4 Composite Ceramic Inert Anodes: Jia Ma1; Yao Guangchun1; Bao Li1; Zhang Xiao1; Ma Junfei1; 1Northeastern University

5:20 PMEffect of Adding Ni-Fe on Properties of Inert Anodes of NiFe2O4 Based Cermet: Zhongsheng Hua1; Guangchun Yao1; Lei Wang1; Zhigang Zhang1; Lisi Liang1; 1Northeastern University

77

Technical Program

Tue.

PM

Energy Conservation in Metals: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Energy CommitteeProgram Organizers: Cynthia Belt, Superior Industries International; Mark Cooksey, CSIRO; Donald Whipple, Bloom Engineering Co Inc; Russell Hewertson, Air Products and Chemicals Inc


Session Chairs: Mark Cooksey, CSIRO; Russell Hewertson, Air Products and Chemicals Inc


2:35 PMFive Low Cost Methods to Improve Energy Efficiency on Reverberatory Furnaces: Cynthia Belt1; Ray Peterson2; Dave Bequette1; 1Superior Industries International; 2Aleris International

2:55 PMEnergy Saving in the Foundry Industry by Using the CRIMSON Single Shot up Casting Process: Mark Jolly1; 1University of Birmingham

3:15 PMEnergy and Emissions with Oxyfuel: Thomas Niehoff1; 1Linde Gas

3:35 PMIndustrial Application Experiences with Microporous Calcium Hexaluminate Insulating Material SLA-92: Dale Zacherl1; Rainer Kockegey-Lorenz2; Andreas Buhr2; 1Almatis, Inc; 2Almatis GmbH

3:55 PMIdentifying Some Potential Future Hydrometallurgical Processes in Treatment of Nickel Laterites: Sarveswara Rao Katragadda1; 1Institute of Minerals and Materials Technology


Failure of Small-Scale Structures: Device Failure and FatigueSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Marian Kennedy, Clemson Univeristy; Brad Boyce, Sandia National Laboratory; Reinhold Dauskardt, Stanford; Zhiwei Shan, Hysitron Inc


Session Chair: Molly Kennedy, Clemson University

2:00 PM InvitedNitinol Fatigue – A Review: Xiao-Yan Gong1; Jixi Zhang2; Yanyao Jiang2; 1Medical Implant Mechanics LLC; 2University of Nevada, Reno

2:25 PMFailure of Micron-Scale Polysilicon MEMS: Fatigue and Wear Mechanisms: Daan Hein Alsem1; Robert Ritchie2; 1Lawrence Berkeley National Laboratory; 2Lawrence Berkeley National Laboratory/University of California at Berkeley

2:40 PMFinite Element Simulation of Galvanic Corrosion in Silicon Microsystems: Collin Becker1; Conrad Stoldt1; David Miller2; 1University of Colorado; 2National Renewable Energy Laboratory

2:55 PMSize-Scale Effects in the Fracture of Polycrystalline Silicon for Microsystems: Brad Boyce1; E. David Reedy1; James Foulk1; 1Sandia National Labs

3:10 PMTheta-like Specimens to Determine Tensile Strength at the Micro Scale: Michael Gaither1; Frank DelRio1; George Quinn1; Richard Gates1; Robert Cook1; 1National Institute of Standards and Technology

3:25 PMFracture Behavior of Partially-Sintered Ceramics for Electrochemical Cell Applications: Xiaoxing Liu1; Christophe Martin1; Gerard Delette2; 1Grenoble-INP; 2CEA-Grenoble

3:40 PMFailure Analysis of Audio Connectors Component Using X-Ray 3D Technology: Daniele Rolim1; Iramylson Freitas1; Idelcio Cardoso1; Ocileide Silva1; 1Nokia Institute of Technology

3:55 PM Break

4:10 PM InvitedMitigation of Wear-Induced Failure of Microsystems by Vapor Phase Lubrication: Michael Dugger1; 1Sandia National Laboratories

4:35 PMIn-Situ Microscale Fatigue Study to Determine the Effect of Microstructural Neighborhoods on Crack Initiation Mechanisms and Lifetimes: Christopher Szczepanski1; Sushant Jha1; Bob Wheeler2; James Larsen3; 1UTC/AFRL; 2UES/AFRL; 3AFRL

General Abstracts: Structural Materials Division: Fatigue and FractureSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Composite Materials Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Mechanical Behavior of Materials Committee, TMS/ASM: Nuclear Materials Committee, TMS: Refractory Metals Committee, TMS: Titanium CommitteeProgram Organizers: Eric Ott, GE Aviation; Robert Hanrahan, National Nuclear Security Administration; Judith Schneider, Mississippi State University

Tuesday PM Room: 3AFebruary 16, 2010 Location: Washington State Convention Center


2:00 PMFatigue Crack Growth Mechanisms of Long and Small Cracks in Structural Materials: Anastasios Gavras1; Christopher Lammi1; Diana Lados1; 1Worcester Polytechnic Institute

2:20 PMNovel Methods for Microstructure-Sensitive Probabilistic Fatigue Notch Factor: William Musinski1; David McDowell1; 1Georgia Institute of Technology

2:40 PMEffect of Low-Temperature Overload on Fatigue Crack Growth Retardation: Sai Kumar1; Jyoti Mohanty1; Bipin Verma1; Prabal Ray1; 1National Institute of Technology, Rourkela

3:00 PMA Physical Interpretation of Basquin Relation: Partha De1; Wei Yuan1; Rajiv Mishra1; 1Missouri University of Science and Technology

3:20 PMEffect of Hydrogen on Crack Nucleation in 316 Stainless Steel under Rotating Beam Fatigue Loading Conditions: Douglas Matson1; Christian Skipper1; Gary Leisk1; Anil Saigal1; 1Tufts University

3:40 PM Break


78

Technical Program

Tue.

PM

3:50 PMS-N Fatigue and Fatigue Crack Propagation Behaviors of High Manganese Steels: Jaeki Kwon1; Sanguk Jin1; Sangshik Kim1; 1Gyeongsang National University

4:10 PMEffect of Ca, Mg and Ti-Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon Steel: Jianghua Ma1; Dongping Zhan1; Zhouhua Jiang1; Jin Yu1; Jicheng He1; Haijun Shen2; 1Northeastern University; 2Baoshan Iron & Steel Co., Ltd.

4:30 PMDevelopment of Layer-Integrated Steels with Superior Strength-Ductility Combination: Shoichi Nambu1; Masato Michiuchi1; Junya Inoue1; Toshihiko Koseki1; 1The University of Tokyo

4:50 PMFatigue Crack Growth Behavior in a Monocrystalline Ni-Based Superalloy: Clarissa Yablinsky1; Katharine Flores1; Michael Mills1; James Williams1; 1The Ohio State University

5:10 PMThe Role of Non-Planar Deformation in Cyclic Softening Following Low Cycle Fatigue of a Ni-Based Superalloy: Patrick Phillips1; Raymond Unocic1; Libor Kovarik1; Dan Wei2; David Mourer2; Michael Mills1; 1Ohio State University; 2GE Aviation

5:30 PMComputational Thermodynamics, Neural Networks and Genetic Algorithms: Tools to Design Creep Resistant and Weldable Superalloys: Franck Tancret1; 1Université de Nantes

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Innovations in Primary and Secondary Forming - TitaniumSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Dan Sanders, Boeing Corporation; Lee Semiatin, AFRL-RX

2:00 PM InvitedSevere-Plastic Deformation and Superplasticity of Two-Phase Titanium Alloys: Lee Semiatin1; G. A. Sargent2; A. K. Ghosh3; G. A. Salishchev4; C. S. Lee5; 1US Air Force Research Laboratory; 2UES, Inc.; 3University of Michigan; 4Belgorod State University; 5Pohang University of Science and Technology

2:30 PMProcessing, Structure and Properties of Safety Critical Titanium - An Engineering Perspective: David Rugg1; D. Furrer2; M. Glavicic2; 1Rolls-Royce Plc; 2Rolls-Royce Corporation

2:50 PMThe Effect of Macrozone Formation during Thermo-Mechanical Processing on the Fatigue Response of Commercial Ti-6Al-4V Products: M.R. Bache1; C. Pleydell-Pearce1; 1Swansea University

3:10 PMIn Situ Observation of Texture Evolution during Rolling and Recrystallisation of Ti-6Al-4V: Jonnathan Warwick1; R. J. Talling2; M. Preuss2; D. Dye1; 1Imperial College London; 2Manchester University

3:30 PMThe Effect of Beta Grain Growth on Alpha Variant Selection in Ti-6Al-4V: G. Obasi1; S. Birosca1; Michael Preuss1; 1University of Manchester

3:50 PMThe Relevance of Twinning during Deformation of Ti-6Al-4V: D.G. Leo Prakash1; R. J. Moat1; R. Ding2; I. Jones2; P. Withers1; J. Quinta da Fonseca1; Michael Preuss1; 1University of Manchester; 2University of Birmingham

4:10 PM Break

4:20 PMDislocation Transmission through Interphase Boundaries in Ti-6Al-4V: R. Ding1; J. Gong2; A.J. Wilkinson2; I. P. Jones1; 1University of Birmingham; 2Oxford University

4:40 PMThe Application of Fine Grain Titanium 6Al-4V for Superplastic Forming and Superplastic Forming and Diffusion Bonding of Aerospace Products: Larry Hefti1; 1The Boeing Company

5:00 PMManufacturing of β-Titanium Ti-10V-2Fe-3Al Spin-Extruded Hollow Shafts for High Strength Power Train Applications in Aerospace and Automotive Industries: Christian Machai1; Dirk Biermann1; 1Technische Universität Dortmund

5:20 PMSuperplastic Forming and Diffusion Bonding Process Design for Aerospace Component: Yong-Nam Kwon1; 1Korea Institute of Materials Science

5:40 PMApplication of Statistical Continuum Mechanics to Guide Processing of Aerospace Materials: Dongsheng Li1; Hamid Garmestani1; 1Georgia Institute of Technology

Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids: Experiment IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Rainer Schmid-Fetzer, Clausthal University of Technology; Heike Emmerich, RWTH Aachen University; Frans Spaepen, Harvard University; Martin Glicksman, University of Florida; John Perepezko, University of Wisconsin, Madison


Session Chairs: Ma Qian, University of Queensland; John Perepezko, University of Wisconsin - Madison

2:00 PM InvitedGrain Formation: The Interdependence between Grain Growth and Nucleation: David StJohn1; Ma Qian1; Mark Easton2; 1CAST CRC, University of Queensland; 2CAST CRC, Monash University

2:25 PM InvitedModeling Transient Growth of Undercooled Solid Nuclei in the Melt: Markus Rettenmayr1; Marcel Fink1; 1Friedrich-Schiller-University Jena

2:50 PMInvestigation of Heterogeneous Nucleation of the Beta Phase in the System Ti-Al: Daniel-Hendrik Gosslar1; Christian Hartig1; Robert Guenther1; Ulrike Hecht2; Ruediger Bormann1; 1Hamburg University of Technology; 2Access e.V.

3:10 PMHeterogeneous Nucleation and Microstructure Formation in Peritectic Al-Ni Alloys: Evelyn Doernberg1; Ricardo Siquieri2; Hailin Chen1; Heike Emmerich2; Rainer Schmid-Fetzer1; 1Clausthal University of Technology; 2RWTH Aachen

79

Technical Program

Tue.

PM

3:30 PMHeterogeneous Nucleation in Liquid Immiscible Alloys: Markus Koehler1; Lorenz Ratke1; 1German Aerospace Center

3:50 PM Break

4:10 PMCharacterization of the Initial Stages of Phase Separation by Atom Probe Tomography: Michael Miller1; Ai Serizawa1; 1ORNL

4:30 PMNucleation of Strengthening Dispersions in a High-Strength Low-Carbon Steel: Mike Mulholland1; David Seidman1; 1Northwestern University

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session IVSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



2:00 PM InvitedChasing Exotic Binary Alloy Compounds: The Necessary Synergy of Cluster Expansion and High-Throughput Methods: Stefano Curtarolo1; Gus Hart2; Ohad Levy3; 1Duke University; 2Brigham Young University; 3NRCN

2:30 PMInformatics Applications to Electronic Structure Calculations: Krishna Rajan1; Scott Broderick1; Tao Wang1; 1Iowa State University

2:50 PMThe Prediction of Crystal Structure by Combining Machine Learning Knowledge Methods with First Principles Energy Methods: Gerbrand Ceder1; 1Massachusetts Institute of Technology (MIT)

3:10 PM InvitedPredicting Solid - Aqueous Equilbria for Materials Design: Kristin Persson1; 1LBNL

3:40 PM Break

4:10 PM InvitedTransfer Matrix Approach to Quasi-1D Nanostructures with Cluster Interatomic Interactions: Vasyl Tokar1; Hugues Dreyssé2; 1Institute of Magnetism of NAS and MES; 2Universite de Strasbourg, CNRS

4:30 PMTowards a First-Principles Understanding of the Iron Phase Diagram: Fritz Körmann1; Alexey Dick1; Blazej Grabowski1; Tilmann Hickel1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung

International Symposium on High-Temperature Metallurgical Processing: Smelting and Reduction ProcessesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Pyrometallurgy CommitteeProgram Organizers: Jaroslaw Drelich, Michigan Technological University; Jiann-Yang Hwang, Michigan Technological University; Tao Jiang, Central South University; Jerome Downey, Montana Tech


Session Chair: Tao Jiang, Central South University

2:00 PMIndustrial Operation of JAE Nickel Smelting Technology at Jinchuan Nickel Smelter: Min Zhou1; Aidong Wan1; Guang Li1; Ross Baldock2; Harry Li2; 1Jinchuan Non Ferrous Metals Corp.; 2Ausmelt Ltd

2:20 PMArc Plasma Smelting of Niobium Pentoxide towards Production of Nb Metal: Bijan Nayak1; Barada Mishra1; 1IMMT

2:40 PMCarbothermic Reduction of Niobium Concentrate: Joao Ferreira Neto1; Flavio Beneduce Neto1; Cyro Takano2; 1Institute for Technological Research - IPT; 2University of Sao Paulo

3:00 PMVolatilization of Antimonite in Nitrogen-Oxygen Atmospheres: Rafael Padilla1; Gustavo Ramirez1; Alvaro Aracena1; Maria Ruiz1; 1University of Concepcion

3:20 PMThe Optimization of the Coke and Agglomerte Quantity in Lead Production in “Water-Jacket” Furnace: Ahmet Haxhiaj1; Egzon Haxhiaj2; 1University of Prishtina; 2American University in Kosovo

3:40 PM Break

3:55 PMInfluences of MgO on Roasting Properties of Iron Ore Oxidized Pellets: Xiaohui Fan1; Min Gan1; Tao Jiang1; Xuling Chen1; Lishun Yuan1; 1Central South University

4:15 PMResearch on the Intensifying Reduction Technology Based on Mechanically Activated Ilmenite Ore: Yufeng Guo1; Hemei Liu1; Tao Jiang1; Guanzhou Qiu1; 1Central South University

4:35 PMStudy on Reduction Roasting and Separation of Nickeliferous Laterite by Microwave Heating: Yi Lingyun1; Huang Zhucheng1; 1Central South University

4:55 PMStudy on Preparation of Titanium-Rich Material From Ilmenite by Reduction-Magnetic Separation Process: Yufeng Guo1; Dan Huang1; Guangzhou Qiu1; Tao Jiang1; 1School of Minerals Processing and Bioengineering, Central South University

5:15 PMThe Kinetics of Oxidation of Tellurium Sulfide Concentrate: Edgar Blanco1; 1Western Utah Copper Company


80

Technical Program

Tue.

PM

Jim Evans Honorary Symposium: Metal Flow, Bubbles, and Inclusions Behavior in Refining and Reduction VesselsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Stavros Argyropoulos, University of Torronto


2:40 PMPlume Characteristics in Gas Stirred Ladles: Piotr Scheller1; Olena Volkova1; Dmitri Ryabov1; 1Freiberg University

3:05 PMDevelopment of Online Sensors for Bubble Stirred Vessels: Geoffrey Brooks1; Xiaodong Xu1; William Yang2; 1Swinburne University of Technology; 2CSIRO Minerals

3:30 PMFluid Flow and Inclusion Behavior in a Continuous Billet Casting Tundish: Qinglin He1; Geoff Evans1; 1University of Newcastle

3:55 PMPhysical Modeling of Slab Caster Tundish to Improve Yield and Quality of Steel: Dipak Mazumdar1; 1Indian Institute of Technology-Kanpur

4:20 PM Break

4:35 PMTime Dependent MHD Models for Aluminium Reduction Cells: Valdis Bojarevics1; Koulis Pericleous1; 1University of Greenwich

5:00 PMModeling on Multiphase Fluid Flow in Aluminum Electrolysis Cell: Yufeng Wang1; Lifeng Zhang1; 1Missouri University of Science and Technology

5:25 PMResearch and Development of Three-Dimensional Electrochemical Reactors at UC Berkeley and ICPF Prague – Overview: Vladimir Jiricny1; James Evans2; 1Institute of Chemical Process Fundamentals, ASCR,v.v.i.; 2University of California

5:50 PMImportance of Microexothermicity in the Assimilation and Recovery of Additions in Liquid Metals: Zhi Li1; Stavros Argyropoulos1; 1University of Toronto

Magnesium Technology 2010: Fatigue, Failure, and WearSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Michele Manuel, University of Florida; Anumalasetty Nagasekhar, The University of Queensland

2:00 PMEffect of Shot Peening on High Cycle Fatigue Performance of Mg–10Gd–3Y–0.5Zr Magnesium Alloy: Wencai Liu1; Jie Dong1; Ping Zhang2; Li Jin1; Wenjiang Ding1; 1Shanghai Jiao Tong University; 2BTU-Cottbus

2:20 PMMonotonic and Multiaxial Cyclic Behavior of the Extruded AZ31B Magnesium Alloy: Jafar Albinmousa1; Hamid Jahed1; Steve Lambert1; 1University of Waterloo

2:40 PMFatigue Evaluation of Friction Stir Spot Welds in Magnesium Sheets: J. Jordon1; M. Horstemeyer1; Jenna Grantham1; 1Mississippi State University

3:00 PMAtomistic Simulations of Fatigue Crack Growth and the Influence of Temperature on Fatigue Behavior in Magnesium Crystals: Tian Tang1; Sungho Kim1; Mark F. Horstemeyer1; 1Mississippi State University

3:20 PMStructure-Property Evaluation of Fatigue Damage in a Magnesium AM30 Alloy: J. Bernard1; J. Jordon1; M. Horstemeyer1; H. El Kadiri1; 1Center for Advanced Vehicular Systems, Mississippi State University

3:40 PM Break

4:00 PMVery High Cycle Fatigue Property of Magnesium Alloy in Axial Loading and Rotating Bending: Tatsuo Sakai1; Yosuke Nakamori1; Noriyuki Ninomiya1; Mitsuji Ueda2; 1Ritsumeikan University; 2KS TECHNOS

4:20 PMNumerical Modeling of Failure in Magnesium Alloys during Crush Simulations: Jonathan Rossiter1; Kaan Inal1; Raja Mishra2; 1University of Waterloo; 2General Motors R&D Center

4:40 PMDry Sliding Wear Behavior of AE44 Magnesium Alloy Reinforced with Saffil Alumina Fibers: Bin Hu1; Liming Peng1; Bob Powell2; Michael Lukitsch2; Anil Sachdev2; Xiaoqin Zeng1; 1Shanghai Jiao Tong University; 2General Motors Corporation

5:00 PMInfluence of Cerium on Stress Corrosion Cracking in AZ91D: Meredith Heilig1; Daniela Zander2; David Olson1; Brajendra Mishra1; Norbert Hort3; Gerald Klaus4; Andreas Buehrig-Polaczek4; Joachim Gröbner5; Rainer Schmid-Fetzer5; 1Colorado School of Mines; 2TU Dortmund; 3GKSS Research Centre; 4Foundry-Institute of RWTH Aachen; 5TU Clausthal

5:20 PMIn-situ Fracture Investigations of YAl2 Reinforced Magnesium Matrix Composite: Zhaohua Ling1; Guoqing Wu1; Jianku Shang2; Sujie Wang1; Zheng Huang1; 1Beihang University; 2University of Illinois, Urbana-Champaign

81

Technical Program

Tue.

PM

Magnesium Technology 2010: Magnesium - Rare Earth AlloysSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Sean Agnew, University of Virginia; Jian-Feng Nie, Monash University

2:00 PMDevelopment of High Ductility Magnesium-Zinc-Cerium Extrusion Alloys: Alan Luo1; Raj Mishra1; Anil Sachdev1; 1General Motors Corporation

2:20 PMEffect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr Alloy Solid State Recycled by Hot Extrusion: Qudong Wang1; Jie Chen1; Tao Peng1; Zheng Zhao1; Wenjiang Ding1; 1National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiao Tong University

2:40 PMStructure of β1 precipitates in Mg-Zn based alloys: Co-Existence of MgZn2 and Mg4Zn7 Phases: Alok Singh1; Julian Rosalie1; Hidetoshi Somekawa1; Toshiji Mukai1; 1National Institute for Materials Science

3:00 PMRheological Behavior of Semi-Solid Mg-Y Alloys: Qiuming Peng1; Yuanding Huang1; Norbert Hort1; Karl Ulrich Kainer1; 1MagIC – Magnesium Innovation Centre

3:20 PMThe Use of Computer Modeling for Producing DC Cast WE43 Magnesium Alloy Slab: Mark Turski1; John Grandfield2; Tim Wilks1; Bruce Davis3; Rick DeLorme3; 1Magnesium Elektron; 2Grandfield Technology Pty Ltd; 3Magnesium Elektron North America

3:40 PM Break

4:00 PMEffects of Extrusion Conditions on the Microstructure and Properties of Mg-Zn-Y-RE Alloys: Jonghyun Kim1; Yoshihito Kawamura2; 1Kumamoto Technology & Industrial Foundation; 2Kumamoto University

4:20 PMEffect of Cerium on the Deformation Behavior of Two Mg-Ce Alloys: Lan Jiang1; Xavier Quelennec1; John Jonas1; Raja Mishra2; 1McGill University; 2GM

4:40 PMStructural Relationships between Monoclinic and Laves Phase Precipitates in Mg-Zn-Y Alloys: Julian Rosalie1; Hidetoshi Somekawa1; Alok Singh1; Toshiji Mukai1; 1National Institute for Materials Science

5:00 PMExploiting Low Levels of Rare Earth Addition in Mg Extrusion Alloys: Matthew Barnett1; A.G. Beer1; N. Stanford1; 1Deakin University

5:20 PMThermodynamic Database Development of Mg Alloys with RE Elements and Its Applications to Mg Alloy Design: Youn-Bae Kang1; Liling Jin1; In-Ho Jung2; Arthur D. Pelton1; Patrice Chartrand1; Carlton D. Fuerst3; 1Ecole Polytechnique de Montreal; 2McGill University; 3General Motors

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: SOFC ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: Teruhisa Horita, AIST; Harry Finklea, West Virginia University

2:00 PM InvitedDegradation of SOFC Anodes and SOFC Performance in Coal Syngas Containing Phosphine: Harry Finklea1; Oktay Demircan1; John Zondlo1; Chunchuan Xu1; 1West Virginia University

2:40 PMEffects of Phosphine on Solid Oxide Fuel Cell Performance and Related Anode Surface Temperature Measurement: Huang Guo1; Gulfam Iqbal1; Bruce Kang1; 1West Virginia University

3:00 PMFabrication and Characterization of Thin Film La0.6Sr0.4Co0.2Fe0.8O3-

δ (LSCF) and La0.6Sr0.4Co0.2Fe0.8O3-δ - Ce0.8Gd0.2O1.9 (CGO) Composite Cathodes: Bainye Angoua1; Elliot Slamovich1; 1Purdue University

3:20 PMSintering Performance of YSZ Ceramics with Transition Metal Oxide Sintering Aid: Stephen Sofie1; M.L. Lifson1; C. Law1; 1Montana State University

3:40 PM Break

3:50 PMModeling of Total and Topologically Connected Triple Phase Boundaries in Composite Cathodes for Solid Oxide Fuel Cells: Arun Gokhale1; Shenjia Zhang1; 1Georgia Institute of Technology

4:10 PMModeling Solid Oxide Fuel Cells with Mixed Conducting Electrolytes and Anode Functional Layers: Keith Duncan1; Eric Wachsman1; 1University of Florida

4:30 PMModelling the Effect of Dopant Concentration on Lattice Strain and Ionic Conductivity in Fluorite Oxides: Keith Duncan1; Eric Wachsman1; 1University of Florida

4:50 PMSimulation of Oxygen Ion Transport in Mixed-Conducting Solid Oxide Fuel Cell Cathode with Complex Microstructure: Hsun-Yi Chen1; Hui-Chia Yu1; Cortney Kreller2; James Wilson3; Scott Barnett3; Stuart Adler2; Katsuyo Thornton1; 1University of Michigan; 2University of Washington; 3Northwestern University

5:10 PMReliability Model for Different Configurations of Planar-SOFC Anode under Syngas Contaminants: Gulfam Iqbal1; Huang Guo1; Bruce Kang1; 1West Virginia University


82

Technical Program

Tue.

PM

Materials Processing Fundamentals: Smelting, Refining, Aqueous and Liquid ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS: Process Technology and Modeling CommitteeProgram Organizer: Prince Anyalebechi, Grand Valley State University



2:30 PMA Comparative Electrochemical Study of Arsenic Removal from Organic and Inorganic Sources Using Various Sacrificial Electrodes: Jewel Gomes1; Sanoar Rahman1; Srikanth Varma1; Kamol Das1; David Cocke1; 1Lamar University

2:50 PMCharacterization of Sodium and Bath Penetration in Industrial Graphitic and Graphitized Cathodes: Jilai Xue1; Liancheng Wu1; Gangqiang Jiang1; Qingren Niu1; Qingsheng Liu1; Hou Xin1; Jun Zhu1; He Hua1; 1Unversity of Science and Technology Beijing

3:10 PMAnalysis and Identification Minerals Present in Rock Samples: Andrew Appaji1; 1Noorul Islam University

3:30 PMPreparation and Degradation Orgnic of TiO2 Coated on Light Ceramic Surface: Ju Hua1; 1Harbin Institute of Technology

3:50 PMFe-Ni Alloys Formation in Carbonthermal Reduction Process using Laterite Nickel Ore: Jilai Xue1; Luxing Feng1; Jun Zhu1; 1Unversity of Science and Technology Beijing

4:10 PM Break

4:30 PMActive Zinc Oxide Production from Waste Zinc Powder: Cem Colakoglu1; Onuralp Yucel1; 1Istanbul Technical University

4:50 PMPreparation of MgO Whisker from Magnesite Tailings: Li Yue-yuan1; Cui Hong-Xu1; Chen Min1; 1Northeastern University

5:10 PMRemediation of Chicken Processing Wastewater Using Electrochemically Produced Layered Double Hydroxides: Jewel Gomes1; Daniel Atambo1; Manish Rahate1; Kamol Das1; George Irwin1; Hector Moreno2; David Cocke1; 1Lamar University; 2Instituto Tecnologico de la Laguna

5:30 PMCarbon-Thermal Reduction Process for Making Al-Si Alloys from Al2O3-SiO2 Containing Industrial Wastes: Jilai Xue1; Yunxia Song1; Jun Zhu1; 1University of Science and Technology Beijing

Mechanical Performance for Current and Next-Generation Nuclear Reactors: Microstructure and Nanostructure in Reactor EnvironmentsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Dylan Morris, NIST; Greg Oberson, Nuclear Regulatory Commission; Nicholas Barbosa, National Institute of Standards & Tech; Wolfgang Hoffelner, Paul Scherrer Institute


Session Chair: Wolfgang Hoffelner, Paul Scherrer Institute

2:00 PM InvitedIrradiation Effects in Thin Metal Films – Texture Control and Mechanical Properties: Ralph Spolenak1; 1ETH Zurich

2:30 PMElevated-Temperature Compression Testing and Characterization of Deformation and Fracture in Sintered ZrN Pellets as Surrogates for PuN Fuels: Kirk Wheeler1; Pedro Peralta1; Kenneth McClellan2; 1Arizona State University; 2Los Alamos National Laboratory

2:50 PMHigh Temperature Oxidation Behavior of Grain-Refined Inconel 617 for VHTRs: Tae Sun Jo1; Jeong Hun Lim1; Dae-gun Kim1; Young Do Kim1; 1Hanyang University

3:10 PMHot Steam Corrosion Behavior of Ni-Based Superalloys at High Temperature Steam Environments: Donghoon Kim1; Minu Kim1; Hyun Min Lee1; Daejong Kim1; Changheui Jang1; Duk-Joo Yoon2; 1KAIST; 2KEPRI

3:30 PMThe Cause of Dynamic Strain Aging in Zirconium Alloys: Young Suk Kim1; Sung Soo Kim1; 1Korea Atomic Energy Research Institute

3:50 PM Break

4:05 PMThe Thermal Stability and Weldability of a Lean Grade of Duplex Stainless Steel: Julie Tucker1; George Young1; 1Knolls Atomic Power Laboratory

4:25 PMMicrostructural and Mechanical Characteristics of Friction Stir Welded ODS Alloys: Ramprashad Prabhakaran1; J. Wang2; K. Chitrada3; W. Yuan2; I. Charit3; J. Cole1; R. Mishra2; 1Idaho National Laboratory; 2Missouri University of Science and Technology; 3University of Idaho

4:45 PMDiffusion of Silver and Gold in Ion Irradiated Glassy Polymeric Carbon: Malek Abunaemeh1; Ibidapo Ojo1; Claudiu Muntele1; Daryush Ila1; 1Alabama A&M University

5:05 PMLate-Blooming Phase Investigation in an Ion Irradiated Fe-1wt.%Mn Alloy: Estelle Meslin1; Bertrand Radiguet2; Philippe Pareige2; Alain Barbu1; 1CEA; 2CNRS/University of Rouen

5:25 PMThe Effects of Stress and Temperature on the Fatigue Crack Growth Behavior and Microstructural Evolution of Alloy 230: Jatu Burns1; Megan Frary1; 1Boise State University

5:45 PMHigh-Temperature Corrosion of YSZ Plasma-Sprayed on Nickel-Alloys in Molten Chloride Salts: Oscar Quintana1; J. Ernesto Indacochea1; Mark Williamson2; Christine Snyder2; 1University of Illinois; 2Argonne National Laboratory

83

Technical Program

Tue.

PM

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Nanotubes, Soft Materials and Biomedical ApplicationsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Markus Buehler, Massachusetts Institute of Technology; Michael Chandross, Sandia National Laboratories

2:00 PM InvitedMolecular Scale Modeling of Polymer Nanolithography: Michael Chandross1; Gary Grest1; 1Sandia National Laboratories

2:30 PMAtomistic Simulations of the Nanoindentation of Cyclotrimethylene Trinitramine (RDX) (001) Surfaces: Marc Cawkwell1; Kyle Ramos1; Daniel Hooks1; 1Los Alamos National Laboratory

2:50 PMAtomistic Simulation Studies of Rotational Effects in Double-Wall Carbon Nanotubes: Iman Salehinia1; Sergey Medyanik1; 1WSU

3:10 PM InvitedInsights into the Mechanical Behaviour of Glassy Polymers through Molecular Dynamic Simulations: Sumit Basu1; Dhiraj Mahajan1; 1Indian Institute of Technology Kanpur

3:40 PM Break

4:00 PM InvitedNanomechanical Properties of Human Vimentin Intermediate Filaments: Markus Buehler1; Zhao Qin1; 1Massachusetts Institute of Technology

4:30 PMMulti-Scale Model for the Extreme Piezoresistivity in Silicone/Nickel Nanostrand Nanocomposites: Oliver Johnson1; George Kaschner2; Thomas Mason2; David Fullwood1; Brent Adams1; George Hansen3; 1Brigham Young University; 2Los Alamos National Laboratory; 3Conductive Composites Company, LLC.

4:50 PM InvitedNanomechanical Energy Exchange and Dissipation: Jeffrey Grossman1; P. Alex Greaney1; 1Massachusetts Institute of Technology

5:20 PMStudy of Thermo Mechanical Behavior of Plasma Nano Coated TiNi Shape Memory Alloy (SMA) for Biomedical Applications Using Finite Element Method: Payodhar Padhi1; Ramakanta Behuria2; 1Hi-Tech Medical College and Hospital; 2Konark Inistitute of Science and Technology

5:40 PMSpatial Nonlocality and the Viscosity of Polymer Melts toward their Glassy State: Ruslan Puscasu1; Billy Todd1; Peter Daivis2; Jesper Hansen1; 1Swinburne University of Technology; 2RMIT University

Neutron and X-Ray Studies of Advanced Materials III: Applications of Line Profile AnalysisSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Emil Zolotoyabko, Technion, Israel; Peter Liaw, University of Tennessee Knoxville

2:00 PM KeynoteX-Ray Line Profile Analysis – An Ideal Tool to Quantify Structural Parameters of Nanomaterials: Michael Zehetbauer1; Erhard Schafler1; Michael Kerber1; Sigrid Bernstorff2; Tamas Ungar3; 1University of Vienna; 2Sincrotrone Trieste S.C.p.A.; 3Eötvös Lorand University Budapest

2:30 PM InvitedIn-Situ Synchrotron and Neutron Diffraction Studies of Deformation Behaviors at Small Length Scales: Xun-Li Wang1; Sheng Cheng2; Alexandru Stoica1; Joe Horton1; C. T. Liu3; Peter Liaw2; Liang Zuo4; 1Oak Ridge National Laboratory; 2University of Tennessee; 3Hong Kong Polytechnic University; 4Northeastern University

2:50 PM InvitedNeutron Diffraction and Micromechanics Studies of the Fatigue Crack Deformation Behavior: Yanfei Gao1; Rozaliya Barabash2; Lili Zheng1; Sooyeol Lee1; Hahn Choo1; Peter Liaw1; 1University of Tennessee; 2Oak Ridge National Laboratory

3:10 PM InvitedDiffraction Line Profile Analysis for the Study of Transformation Kinetics in Nanocrystalline Materials: Paolo Scardi1; 1University of Trento

3:30 PM InvitedSingle-Grain Microstructure from Polycrystalline Specimens: Tamás Ungár1; 1Eötvös University Budapest

3:50 PM InvitedEvolution of Microstructure during Tensile Deformation of TWIP Steel: X-Ray Line Profile Analysis: Hahn Choo1; Tamas Ungar2; Yang Ren3; Sang-Ho Han4; 1University of Tennessee; 2Eotvos University; 3Argonne National Laboratory; 4POSCO

4:10 PM InvitedNeutron Diffraction and EPSC Modeling: Bjørn Clausen1; Donald Brown1; Carlos Tomé1; Laurent Capolungo2; Sean Agnew3; 1Los Alamos National Laboratory; 2Georgia Tech-Lorraine; 3University of Virginia

4:30 PM Break

4:40 PM InvitedPhase Transformation and Tensile Behavior of a Bainite Steel Studied by In Situ Neutron Scatteing and Dilatometry: Yo Tomota1; Min-Seo Koo1; 1Ibaraki University

5:00 PM InvitedLine Broadening Analysis of High Resolution X-ray Data: I. Noyan1; Andrew Ying1; Conal Murray2; 1Columbia University; 2IBM Research Division

5:20 PMCharacterization of Pt Nanoparticles by Debye Function Analysis of the X-Ray Diffraction Pattern: Kenneth Beyerlein1; Paolo Scardi2; Bob Snyder1; 1Georgia Institute of Technology; 2University of Trento

5:30 PM InvitedProtein Powder Diffraction and Materials Science: Robert Von Dreele1; 1APS/Argonne National Laboratory


84

Technical Program

Tue.

PM

5:50 PMQuantifying the Evolution of Lattice Strain due to Cyclic Loading in 7075 Aluminum Alloy: Jay Schuren1; Matthew Miller1; Alex Kazimirov2; 1Cornell University; 2Cornell High Energy Synchrotron Source

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Reliability (II)Sponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: Rajen Sidhu, Intel Corp.; Alexandre Kodentsov, Eindhoven University of Technology

2:00 PMImpact of Isothermal Aging on Long Term Reliability of Fine Pitch Ball Grid Array Packages with Sn-Ag-Cu Solder Interconnects: Tae-Kyu Lee1; Weidong Xie1; Kuo-Chuan Liu1; Thomas R. Bieler2; 1Component Quality and Technology, Cisco Systems; 2Chemical Engineering and Materials Science, Michigan State University

2:15 PMPb-Free Process Development for Microcircuit Package Assemblies – A University/Industry Design Project Collaboration: Mike Powers1; Jim Shackelford2; Derek Fong2; Zi Gwen Kwan2; Tammy Leung2; Kit-Ying Mak2; Enrique Pedron2; Raminderdeep Sidhu2; Hong-Siang Wei2; 1Agilent Technologies; 2University of California Davis

2:30 PMReliability Evaluation of Cu-Cored Solder Joints: YunSung Kim1; Eunsik Kim2; Heylim Choi1; Jungtak Moon2; Heeman Choe2; 1Kookmin University; 2MK Electron Co

2:45 PMRoles of Service and Materials Parameters on Reliability of Pb-Free, Sn-Based, Solder Joints: K.N. Subramanian1; Andre Lee1; 1Michigan State University

3:00 PMThermal and Mechanical Fatigue Reliability of TiW/Cu and Al/Cu Underbump Metallizations on Glass Substrate: Yong Jun Oh1; Chul Min Choi1; Jae Ho Kim1; 1Hanbat University

3:15 PMAccelerated Life Prediction of Electrochemical Ion Migration on ENIG Surface Finish Circuit: Won Sik Hong1; No Chang Park1; 1Korea Electronics Technology Institutue(KETI)

3:30 PM Break

3:45 PMSpace: The Final Frontier for Pb-Free Electronics?: David Witkin1; 1The Aerospace Corporation

4:00 PMCreep Property of Sn-3Ag-0.5Cu-xNi/Au/Ni Joints after Aging: Chung-Nan Peng1; Jeng-Gong Duh2; Tae-Kyu Lee3; Kuo-Chuan Liu3; Michael Tsai3; 1Department of Materials Science and Engineering, National Tsing Hua University; 2Department of Materials Science and Engineering, National Tsing Hua University; 3Interconnect Technology Team Reliability Engineer, Manufacturing Technology Group, CISCO

4:15 PMInterface Design of Lead-Free Electronic Interconnects: K.N. Subramanian1; Deep Choudhuri1; Andre Lee1; 1Michigan State University

4:30 PMStudy of the Impact Performance of Solder Joints by High-Velocity Impact Tests: Ning Zhang1; Yao Shi2; Fu Yang3; 1Beijing University of Technology and University of Kentucky; 2Beijing University of Technology; 3University of Kentucky

4:45 PMInvestigation and Effects of Wafer Bow in Different 3D Stacking Schemes: Kuan-Neng Chen1; Y. Zhu2; W. W. Wu1; R. Reif3; 1National Chiao Tung University; 2IBM T J Watson Research Center; 3Massachusetts Institute of Technology

5:00 PMShear and Bending Fatigue Failure of Lead Free Solder Joint and Fracture Mechanics: Huili Xu1; Woong Ho Bang1; Choong-Un Kim1; Tae-Kyu Lee2; Hongtao Ma2; Kuo-Chuan Liu2; 1University of Texas at Arlington; 2Cisco System Inc.

5:15 PMInvestigating Defects in through-Silicon via (TSV) Chains by Three Dimensional Imaging Reconstruction: Alphonse-Marie Kamto Tegueu1; Robert Morris1; Gregory Thompson1; Susan Burkett1; 1The University of Alabama

Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials IX: Session IVSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases CommitteeProgram Organizers: Chih-ming Chen, National Chung Hsing University; Srinivas Chada, Medtronic; Sinn-wen Chen, National Tsing-Hua University; Hans Flandorfer, University of Vienna; A. Lindsay Greer, University of Cambridge; Jae-ho Lee, Hongik University; Kejun Zeng, Texas Instruments; Yee-wen Yen, National Taiwan University of Science and Technology; Wojciech Gierlotka, AGH University of Science and Technology; Chao-hong Wang, National Chung Cheng University


Session Chairs: Wojciech Gierlotka, AGH Univeristy of Science and Technology; Clemens Schmetterer, University of Vienna

2:00 PM InvitedHigh Temperature Lead-Free Solder: Solidification Behavior of (Cu,Ni)-Sn-Zn: Hans Flandorfer1; Clemens Schmetterer1; Matthieu Froger1; Herbert Ipser1; 1University of Vienna

2:25 PM InvitedPhase Diagrams in Lead-Free Soldering: Clemens Schmetterer1; Hans Flandorfer1; Herbert Ipser1; 1University of Vienna

2:50 PMPhase Equilibria in the Sn-Ni-Zn Ternary System: Jaewon Chang1; Sun-Kyoung Seo1; Hyuck Mo Lee1; 1KAIST

3:10 PMInterfacial Reaction between Pure Sn and Cu Foil with Different Cu Grain Sizes: Jo Mei Wang1; Jenq Gong Duh1; 1National Tsing Hua University

3:30 PMInterfacial Reactions in the Sn-In-(Zn)/Ag and Sn-In-(Zn)/Ni Couples: Ching-feng Yang1; Sinn-wen Chen1; 1National Tsing-Hua University

3:50 PM Break

85

Technical Program

Tue.

PM

4:00 PM InvitedEnhancement of Heterogeneous Nucleation of β-Sn Phases in Sn-Rich Solders by Adding Minor Alloying Elements with Hexagonal Closed Packed Structures: Moon Gi Cho1; Hyun You Kim1; Sun-Kyoung Seo1; Hyuck Mo Lee1; 1KAIST

4:25 PMPhase diagram and thermodynamic properties of Ag-Cu-In-Sn quaternary system: Wojciech Gierlotka1; Dominika Jendrzejczyk-Handzlik2; 1Yuan-Ze University; 2AGH University of Science and Technology

4:45 PMInterfacial Reaction Effect on Mechanical and Electrical Reliability in Cu/Solder/Cu Bump: Myeong-Hyeok Jeong1; Jae-Won Kim1; Byunghoon Lee2; Kiwook Lee3; Jaedong Kim3; Hoo-Jeong Lee2; Young-Bae Park1; 1Andong National University; 2Sungkyunkwan University; 3Amkor Technology Korea

5:05 PMInteraction of Sn-Based Solders with Electroless Nickel Substrates: The Ni-P, Sn-P, and Ni-Sn-P Phase Diagrams: Clemens Schmetterer1; Rajesh Ganesan1; Adela Zemanova2; Ales Kroupa2; Herbert Ipser1; Alan Dinsdale3; 1University of Vienna; 2Institute of Physics of Materials, ASCR; 3National Physical Laboratory

5:25 PMThe Interfacial Reactions of Snagin Pb-Free Solders on Cu Substrates: YuYan Jieng1; Albert T. Wu1; 1National Central University

Processing Materials for Properties: Light Weight Materials ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Rachman Chaim, Technion - Israel Institute of Technology; Raman Singh, Monash University

2:00 PM KeynoteRecent Developments in Processing/Structures/Properties Relationships of Titanium Alloys: Greg Oberson1; Sreeramamurthy Ankem2; 1U.S. Nuclear Regulatory Commission; 2University of Maryland, College Park

2:30 PMEffect of Casting Mould on Mechanical Properties of 6063 Aluminium Alloy: Wasiu Ayoola; Samson Adeosun1; Olujide Sanni1; F. Ochulor1; 1University of Lagos

2:50 PMIgnition Characteristics of Aluminum-Nickel Heterostructures Produced by Ultrasonic Powder Consolidation: Dinc Erdeniz1; David Colanto1; Gokce Gulsoy1; Teiichi Ando1; 1Northeastern University

3:10 PMImproved Formability of Normalized Cold Rolled Aluminum 1200 and 1230 Alloys: Samson Adeosun1; Sanmbo Balogun1; 1University of Lagos, Akoka

3:30 PMStudies on the Microstructure, Mechanical and High Temperature Wear Behviour of A356 Alloy with Minor Additions of Copper and Magnesium: Kori Shivaputrappa1; 1Visvesvaraya Technological University

3:50 PMNanoscratch Behavior of Fine and Ultrafine-Grained Bulk Alumina Fabricated by Spark Plasma Sintering: Lin Huang1; Yuhong Xiong1; Zhihui Zhang1; Yonghao Zhao1; Wenlong Yao1; Amiya Mukherjee1; Julie Schoenung1; 1University of California, Davis

4:10 PMMicrostructural Development during Thermo Mechanical Processing of Pipeline Steel: Kawunga Nyirenda1; Hara R. S. Yotam1; 1The Copperbelt University

4:30 PMEnhanced Performance of Anti-Reflection Functionality by Nano-Sized Structures Fabricated Using Nano-Imprint Lithography: Kang-Soo Han1; Ju-Hyun Shin1; Heon Lee1; 1Korea University

4:50 PMFrom Fantasy to Reality: The Development of Silver Bullet Ammunition: Kevin Jaansalu1; Michael Briggs1; 1Royal Military College of Canada

5:10 PMResearch on Microstructure and Mechanical Properties of Low Alloy Cast Steel with High Strength/Low Yield Ratio by TMCP Technology: Chi Yu1; Haitao Zhou1; 1Qinhuangdao Branch, Northeastern University

5:30 PMMicrostructure Characterization of Joining Dissimilar Materials: Oleg Barabash1; Zhili Feng1; Mike Miles2; 1Oak Ridge National Laboratory; 2Brigham Young University

5:50 PMLow Stress Viscous Creep in a Ti3Al2.5V Tubing Under Internal Pressurization: Srikant Gollapudi1; Indrajit Charit2; Korukonda Murty3; 1Defence Metallurgical Research Laboratory; 2University of Idaho; 3North Carolina State University

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Diffusion, Radiation Damage, and Interaction with Point DefectsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chair: Y. Mishin, George Mason University

2:00 PM InvitedInterface Enabled Defects Reduction in Helium Ion Irradiated Cu/V Nanolayers: Xinghang Zhang1; Engang Fu1; Amit Misra2; 1Texas A&M University; 2Los Alamos National Laboratory

2:30 PMEffects of Solute and Vacancy Segregation on Antiphase Boundary Migration in Fe3Al with Stoichiometric and Off-Stoichiometeric Composition: Yuichiro Koizumi1; Samuel Allen2; Masayuki Ouchi1; Yoritoshi Minamino1; 1Osaka University; 2Massachusetts Institute of Technology

2:50 PMA First Principles Study of Hydrogen Trapping at Carbides in Steels: Sanket Desai1; Neeraj Thirumalai1; Peter Gordon1; 1ExxonMobil Research and Engineering

3:10 PMMechanisms of Point Defect Migration in CuNb Interfaces: Kedarnath Kolluri1; Michael Demkowicz1; 1Massachusetts Institute of Technology

3:30 PMMolecular Dynamics and Molecular Statics Studies of Cascade Damage in Twist Grain Boundaries in Copper: Xian-Ming Bai1; Richard Hoagland1; Michael Nastasi1; Arthur Voter1; Blas Uberuaga1; 1Los Alamos National Laboratory


86

Technical Program

Tue.

PM

3:50 PMRadiation Damage and He Solubility at Semi-Coherent Cu/Nb Interfaces: Dhriti Bhattacharyya1; Michael Demkowicz2; Igor Usov1; Richard Hoagland1; Amit Misra1; 1Los Alamos National Laboratory; 2Massachusetts Institute of Technology

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Microstructural EvolutionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chairs: Nathan Mara, Los Alamos National Laboratory; Michael Demkowicz, Massachusetts Institute of Technology

4:10 PM InvitedTowards Improved Representations and Maps of the Grain Boundary Character Distribution: Christopher Schuh1; Srikanth Patala1; 1MIT

4:40 PMGrain Boundary Properties in Three Dimensions: Anthony Rollett1; Gregory Rohrer1; Jia Li1; Sukbin Lee2; Moneesh Upmanyu3; Michael Groeber4; Michael Uchic4; Robert Suter1; 1Carnegie Mellon University; 2Purdue University; 3Colorado School of Mines; 4Air Force Research Laboratory

5:00 PMQuantification of Microstructure Variability in Surrogates for Oxide Nuclear Fuels and Its Effects on Local Mechanical Properties: Karin Rudman1; Pedro Peralta1; Chris Stanek2; Kirk Wheeler1; Manuel Parra1; Darrin Byler2; Kenneth McClellan2; 1Arizona State University; 2Los Alamos National Laboratory

5:20 PMFundamental Derivation of Phase Field Equations for Microstructural Evolution in Metals with Defects: Santosh Dubey1; Anter El-Azab1; 1Florida State University

Surface Engineering for Amorphous-, Nanocrystalline-, and Bio-Materials: Session IVSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS: Surface Engineering CommitteeProgram Organizers: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International Univesity; Sudipta Seal, University of Central Florida; Narendra Dahotre, University of Tennessee


Session Chairs: Sandip Harimkar, Oklahoma State University; Arvind Agarwal, Florida International University


2:05 PM InvitedStudies on Plasma Surface Nitriding of Interstitial Free Steel: Manoj Debnath1; Jyotsna Dutta Majumdar1; Indranil Manna1; 1Indian Institute of Technology Kharagpur

2:25 PMNucleation and Growth of Diamond Thin Films Deposited by a CO2 Laser-Assisted Combustion-Flame Method: Travis McKindra1; Matthew O’Keefe1; 1Missouri University of Science and Technology

2:45 PMStress-Driven Surface Instabilities in Ionic Solids Containing Charged Point Defects: Steven Henke1; Anter El-Azab1; Peter Chung2; 1Florida State University; 2U.S. Army Research Lab

3:05 PMThe Effect of Frequency of Microarc Oxidation on Surface Properties of 7075 Aluminum Alloys: Serkan Bozkus1; Murat Baydogan1; Huseyin Cimenoglu1; Eyup Kayali1; 1Istanbul Technical University

3:25 PMStudy of the Nanocomposites for Superalloy Thermal Barrier Coatings: Shiqiang Qian1; 1School of Materials Engineering, Shanghai University of Engineering Science

3:45 PM Break

4:00 PMLaser Assisted Deposition of AgInSe2 Films on Si(100): Dinesh Pathak1; 1GNDU, Amritsar, Physics

4:20 PMA Novel High Throw Bright Acid Tin Plating of Printed Circuit Boards: Xiao Faxin1; SHEN xiaoni1; 1Henan University of Science and Technology of China

4:40 PMA High Speed Electroless Copper Plating Process of Printed Circuit Board from EDTA•2Na-Containing Solution: Xiao Faxin1; Shen Xiaoni1; Niu Fei2; 1Henan University of Science and Technology of China; 2Central South University of China

5:00 PMInfluence of Process Parameters for Electroless Plating Nickel Alloy Nanoparticles on Carbon Fibers: Jia Ma1; Yao Guangchun1; Bao Li1; Zhang Xiao1; Ma Junfei1; 1Northeastern University

5:20 PMSynthesis of Nano Porous CO2 Absorbent for Recycling: Sachi Kanta Kar1; Payodhar Padhi2; 1Central Tool Room and Training Centre; 2R&D Centre, Hitech Medical College and Hospital, Bhubaneswar

Sustainable Materials Processing and Production: Measuring SustainabilitySponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Tuesday PM Room: 2BFebruary 16, 2010 Location: Washington State Convention Center

Session Chair: Markus Reuter, Ausmelt Ltd


2:05 PM InvitedMetrology Needs in Sustainability and Materials Performance: Richard Ricker1; 1NIST

2:30 PMLighweight Materials for the Automotive: Environmental Impact Analysis of the Use of Composites: Karel Van Acker1; Ignaas Verpoest1; Wim Dewulf1; Joost Duflou1; 1K.U.Leuven

87

Technical Program

Tue.

PM

2:55 PMThe Challenge of Allocation in LCA: The Case of Open-Loop Recycling: Elsa Olivetti1; Anna Nicholson2; Jeremy Gregory1; Randolph Kirchain1; 1MIT; 2BIO Intelligence Service

3:20 PMScreening-Level Environmental Burden Assessments for Metals Use in Electronics: A Case Study on the U.S. Printed Wiring Board Industry: Carl Lam1; Seong-Rin Lim1; Oladele Ogunseitan2; Julie Schoenung1; 1University of California, Davis; 2University of California, Irvine

3:45 PM Break

3:55 PM InvitedAgent Based Modeling of Large-Scale Socio-Technical Metal Networks: I. Nikolic1; Andrew Bollinger1; C. Davis1; 1Delft University of Technology

4:20 PMToxicity and Resource Depletion Potentials of Light-Emitting Diodes (LEDs): Seong-Rin Lim1; Daniel Kang2; Oladele Ogunseitan2; Julie Schoenung1; 1University of California, Davis; 2University of California, Irvine

4:45 PMThe Many Aspects of Measuring Sustainability - An Industry Perspective: Christina Meskers1; C. Hagelüken1; 1UMICORE Precious Metals Refining

5:10 PMSubstance Flow Analysis of Cobalt in China: Xiao Caimei1; Zhong Juya1; Guo Xueyi1; Tian Qinghua1; 1Central South University


The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Mechanical PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Takeshi Egami, University of Tennessee; Shao-Ping Chen, Los Alamos National Laboratory

2:00 PM InvitedRethinking Continuum Plasticity Theory for Crystalline Solids: John Bassani1; 1University of Pennsylavnia

2:25 PM InvitedA Comparison of Coulombic and Plastic Shear Faults in Ice: Narayana Golding1; Erland Schulson1; Carl Renshaw1; 1Dartmouth College

2:50 PM InvitedKinetics of Martensitic Phase Transformation: Molecular Dynamics of Martenstic Phase Transitions: Graeme Ackland1; Oliver Kastner1; 1University of Edinburgh

3:15 PMAtomistic Simulations of Hydride Formation and Fracture at the Crack Tip: Jun Song1; William Curtin1; 1Brown University

3:30 PMFirst Principles Calculations of Uranium and Uranium-Zirconium Alloys: Benjamin Good1; Benjamin Beeler1; Chaitanya Deo1; Sergey Rashkeev2; Maria Okuniewski2; Mike Baskes3; 1Georgia Tech; 2Idaho National Lab; 3Los Alamos National Lab

3:45 PM Break

4:05 PM InvitedApplication of Vitek’s Relationship between the Plastic Dissipation and Work Expended on Brittle Decohesion to the Understanding of Hydrogen-Induced Intergranular Cracking: Paul Novak1; Rong Yuan2; Moshen Dadfarnia1; Brian Somerday3; Petros Sofronis1; Robert Ritchie2; 1University of Illinois; 2University of California-Berkeley; 3Sandia National Laboratories

4:30 PM InvitedBreakdown of Relationship between Chemical Bonding and Deformation Behavior in Crystalline Materials: Peter Panfilov1; Yuri Gornostyrev2; A. R. Kuznetsov2; 1Ural State University; 2Institute of Metalphysics of the Ural Branch of RAS and CJSC Institute of Quantum Materials Science

4:55 PMTransitions of Dislocation Glide to Twinning and Shear Transformation in Shock-Deformed Tantalum: Luke Hsiung1; Geoffrey Campbell1; James McNaney1; 1Lawrence Livermore National Laboratory

5:10 PMShock Induced Deformation Substructures and Damage in a Copper Bicrystal: Ellen Cerreta1; Fang Cao1; Irene Beyerlein1; Frank Addessio1; Carl Trujillo1; George Gray1; 1Los Alamos National Laboratory

5:25 PMDislocation Dynamics, Static Shocks and Size Effects: Amine Benzerga1; P. J. Guruprasad1; 1Texas A&M University

5:40 PMComputer Simulation of the Peierls Stress, Dislocation Dynamics and Dislocation-Loop Interaction in Alpha-Zirconium: Hassan Khater1; Anna Serra1; David Bacon2; 1Technical University of Catalonia; 2The University of Liverpool

5:55 PMMultiscale Modeling of Thin Films: Linking Dislocation Dynamics with Macroscopic Mechanical Behavior: Ray Fertig1; Shefford Baker2; 1Firehole Technologies; 2Cornell University

6:10 PMUnderstanding Some of the Microstructural Reasons for the Small-Scale Mechanical Behavior of Directionally Solidified Mo Micropillars: E. P. George1; R. I. Barabash1; H. Bei2; G. E. Ice2; 1Oak Ridge National Laboratory and University of Tennessee, Knoxville; 2Oak Ridge National Laboratory

Three-Dimensional Materials Science VI: 3D Representative Volume Elements and Simulated MicrostructuresSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: Alexis Lewis, U S Naval Research Laboratory; Somanth Ghosh, Ohio State University

2:00 PM InvitedThe Role of Representative Volume Elements on Homogenized Material Properties for Heterogeneous Solids: Somnath Ghosh1; 1The Ohio State University

2:30 PMDual Grid Approach for Meshing 3D Images: Stephen Sintay1; Anthony Rollett1; 1Carnegie Mellon University


88

Technical Program

Tue.

PM

2:50 PMHigh-Fidelity Hexahedral Mesh Generation for Large 3D Material Microstructures: Andrew Geltmacher1; Jin Qian2; Wenyan Wang2; Yongjie Zhang2; Alexis Lewis1; Siddiq Qidwai3; 1Naval Research Laboratory; 2Carnegie Mellon University; 3SAIC

3:10 PM Break

3:30 PM InvitedEvaluation and Generation of Representative Volume Elements - A Characterization and Modeling Based Approach: Stephen Niezgoda1; David Turner1; David Fullwood2; Surya Kalidindi1; 1Drexel University; 2Brigham Young University

4:00 PMSimulations of Realistic Three-Dimensional Multi-Phase Microstructures: Arun Gokhale1; Harpreet Singh1; Yuxiong Mao1; 1Georgia Institute of Technology

4:20 PMSynthetic Microstructure Builders for Rare Events: Michael Groeber1; Jeff Simmons1; Mary Comer2; 1AFRL; 2Purdue

4:40 PM InvitedDistinguishing Statistical and Representative Volume Elements in Structure-Property Simulations: David McDowell1; 1Georgia Institute of Technology

Ultrafine Grained Materials – Sixth International Symposium: Characterization and Computational ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Yonghao Zhao, University of California - Davis; Scott Mao, University of Pittsburgh; Mahmoud Nili Ahmadabadi, University of Tehran; Malgorzata Lewandoska, Warsaw University of Technology

2:00 PM InvitedAtomistic Simulations of Defect and Microstructure Evolution in Irradiated Nanocrystalline Materials: Paul Millett1; Yongfeng Zhang1; Michael Tonks1; Dieter Wolf1; 1Idaho National Laboratory

2:20 PMEBSD Characterization of ECAE Deformed Nb Single Crystals: Liang Zhu1; Hugo R.Z. Sandim2; Marc Seefeldt1; Bert Verlinden1; 1K.U.Leuven; 2University of Sao Paulo

2:35 PMMicrostructure Evolution through Heavy Compression Aided by Thermodynamic Calculations: Farideh Hajiakbari1; Mahmoud Nili-Ahmadabadi1; Behrang Poorganji2; Tadashi Furuhara2; 1Tehran University; 2Tohoku University

2:50 PMPrediction of the Stress-Strain Response of the Ultrafine-Grained Nickel Using Multi-Scale Analysis: Mihaela Banu1; Mitica Afteni1; Alexandru Epureanu1; Clement Keller2; Eric Hug3; Anne-Marie Habraken2; Laurent Duchene2; 1University of Galati; 2Universite de Liege; 3Universite de Caen

3:05 PM InvitedFracture Behavior Analysis in Hard-To-Deform Materials during Equal Channel Angular Pressing by the Finite Element Method: Hyoung Seop Kim1; Seung Chae Yoon2; Taek Soo Kim3; 1POSTECH; 2Hyundai HYSCO; 3KITECH

3:25 PMMicro-Mechanical Modeling of Damage in IF Steel Strengthened by Severe Plastic Deformation: Nisrin Abdel Al1; Amine Benzerga1; 1Texas A&M University

3:40 PMHRTEM and EELS Study on Aluminum Nitride in Nanostructured Al 5083/B4C Metal Matrix Composites: Ying Li1; Zhihui Zhang1; Rustin Vogt1; Wei Liu1; Enrique Lavernia1; Julie Schoenung1; 1University of California Davis

3:55 PM Break

4:10 PMSynergic Effects of Grain Refinement and Precipitation Strengthening: Malgorzata Lewandowska1; Krzysztof Kurzydlowski1; Romuald Dobosz1; 1Warsaw University of Technology

4:25 PMInfluence of Specimen Dimensions and Strain Measurement Methods on the Apparent Ductility of Bulk Nanostructured Materials: Yonghao Zhao1; Troy Topping1; Yazhou Guo2; Qiuming Wei2; Yuntian Zhu3; Terence G. Langdon4; Enrique Lavernia1; 1University of California-Davis; 2University of North Carolina-Charlotte; 3North Carolina State University; 4University of Southern California

4:40 PM InvitedAvoiding Cracks and Inhomogeneities in Billets Processed by ECAP: Paulo Cetlin1; Maria Teresa Aguilar1; Roberto Figueiredo2; Terence Langdon2; 1Federal University of Minas Gerais; 2University of Southern California

5:00 PMMultiscale Modeling of Back-Stress Evolution in Equal-Channel Angular Pressing: Enze Chen1; Laurent Duchêne2; Anne-Marie Habraken2; Bert Verlinden1; 1Katholieke Universiteit Leuven, Belgium; 2FNRS Fonds de la Recherche Scientifique, Université de Liège

5:15 PMMicrostructure of Cu And Cu + Zr Samples after ECAP and HPT Deformation Studied by Different Methods: Radomir Kuzel1; Zdenek Matej1; Milos Janecek1; Jakub Cizek1; Milan Dopita2; 1Charles University in Prague, Faculty of Mathematics and Physics; 2Institute of Materials Science, TU Bergakademie Freiberg

5:30 PMPartial Dislocation Nucleation and Travelling in Nanocrystalline Metals: Scott Mao1; Zhiwei Shan2; 1University of Pittsburgh; 2Hysitron Inc

5:45 PMUltra Fine-Grained Structures Formed in Impact Welding of 6061 Aluminum Alloy and 110 Copper Alloy: Yuan Zhang1; Glenn Daehn1; Suresh Babu1; 1The Ohio State University

89

Technical Program

Tue.

PM

Ultrafine Grained Materials – Sixth International Symposium: Microstructural EvolutionSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Matthias Goeken, University Erlangen--Nürnberg; Mohammed Haouaoui, Texas A&M University; Joel House, U.S. Air Force Research Laboratory; Indranil Roy, Schlumberger

2:00 PM InvitedAtom Probe Tomography: A New Insight into the Partition and Segregation of Solutes in Ultrafine-Grained and Nanocrystalline Al Alloys: Gang Sha1; Xiaozhou Liao1; Rimma Lapovok2; Ruslan Valiev3; Terence Langdon4; Simon Ringer1; 1The University of Sydney; 2Monash University; 3Ufa State Aviation Technical University; 4University of Southern California

2:20 PMDeformation Induced Grain Growth in Nanostructured Al-Mg Alloy: Zhihui Zhang1; Xiaolin Wu2; Ying Li1; Troy Topping1; Yizhang Zhou1; Wei Xu2; Kenong Xia2; Enrique Lavernia1; 1University of California, Davis; 2University of Melbourne

2:35 PM InvitedMicrostructural Evolution during Processing and Deformation of Ultrafine Grain Metals: Marc Meyers1; Y.-B. Xu2; H. J. Yang2; B. K. Kad1; 1UCSD; 2Institute for Metal Research Chinese Academy of Sciences

2:55 PMGrain Refinement in Magnesium Alloys Processed by ECAP: Roberto Figueiredo1; Terence Langdon1; 1University of Southern California

3:10 PM InvitedMicrostructure Evolutions in Ti and Zr by Pressure-Induced Phase Transformation under HPT-Straining: Yoshikazu Todaka1; Hiroaki Azuma1; Kensyu Irie1; Nozomu Adachi1; Yuuki Ohnshi1; Minoru Umemoto1; 1Toyohashi University of Technology

3:30 PM InvitedNew Strategies to Overcome the Limits in Refinement by Severe Plastic Deformation: Reinhard Pippan1; Anton Hohenwarter1; Andrea Bachmaier1; 1Erich Schmid Institute of Materials Science, Austrian Academy of Sciences

3:50 PM Break

4:05 PM InvitedStrain Path and Microstructure Evolution during Severe Plastic Deformation (SPD) Processing: Terry McNelley1; Juan Garcia-Infanta2; Srinivasan Swaminathan3; Alexandre Zhilyaev4; Fernando Carreno2; Oscar Ruano2; 1Naval Postgraduate School; 2Centro Nacional de Investigaciones Metalurgicas; 3GE Global Research; 4Centro Nacional de Investigaciones Metalurgicas and Institute for Metals Superplasticity Problems

4:25 PMNanoscale Structural Refinement and Deformation Mechanisms in Beta-Type Titanium Alloys: Mariana Calin1; Wei Xu2; Jürgen Thomas1; Norbert Mattern1; Michael Zehetbauer3; Jürgen Eckert1; 1IFW Dresden; 2University of Melbourne; 3Universität Wien

4:40 PMMicrostructural Evolution during Cryomilling of B4C Reinforced Al Nanocomposite: Byungmin Ahn1; Yuzheng Zhang1; Rustin Vogt2; Zhihui Zhang2; Julie Schoenung2; Enrique Lavernia2; Steven Nutt1; 1University of Southern California; 2University of California, Davis

4:55 PMRecrystallization of Tantalum Processed by Equal Channel Angular Pressing: Joel House1; John Bingert2; Philip Flater1; James O’Brien3; William Hosford4; Robert DeAngelis5; Richard Harris1; 1Air Force Research Laboratory; 2Los Alamos National Laboratories; 3O’Brien and Associates; 4University of Michigan; 5University of Florida

5:10 PMUltrafine Grain Refinement of Co-29Cr-6Mo Alloys with Considerably Low Stacking Fault Energy during Conventional Hot-Compression Deformation: Akihiko Chiba1; Kenta Yamanaka1; Manami Mori1; Shingo Kurosu1; Hiroaki Matsumoto1; Yunping Li1; 1Tohoku University

5:25 PM InvitedEffect of Interfaces on Microstructural Evolution and Deformation Behavior of Ultrafine Ag-Cu Laminar Nanocomposites: Nathan Mara1; Dhriti Bhattacharyya1; Irene Beyerlein1; David Alexander1; Carl Necker1; 1Los Alamos National Laboratory


90

Technical Program

Wed

. AM

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Synthesis of Nanomaterials IIISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Wednesday AM Room: 214February 17, 2010 Location: Washington State Convention Center

Session Chair: Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation


8:35 AMEffect of Milling Parameters on the Structural Stability of Isothermally Heat Treated Nanostructured Al-2.7at. %Ni Mechanically Alloyed Eutectic Powders: Hanadi Salem1; Mohy Eldin Raged1; 1American University in Cairo

8:55 AMInfluence of the Dispersion Mechanism of Nanostrucutred Al50Ni50 Intermetallic Compound in Al-Matrices on the Consolidation Behavior and Structural Stability: Hanadi Salem1; Abdel Hamid Abdel Hamid1; 1American University in Cairo

9:15 AMFabrication of Aluminum Carbon Nanotube Composites Via High-Energy Milling: Joseph Paras1; Ryan Carpenter1; Deepak Kapoor1; Stephen Bartolucci1; Tony Zahrah2; Rod Rowland2; 1U.S. Army ARDEC; 2MATSYS Inc.

9:35 AMStudies on the Mechanical Properties of Al-Mg-SiO2 Metal-Matrix Nanocomposite Synthesized by Mechanical Alloying: Nikhil Balachander1; Shashank Shekher1; Arun Naik1; Jatin Bhatt1; D.R. Peshwe1; 1VNIT Nagpur

9:55 AM Break

10:10 AMMicrostructures and Electrochemical Properties of Nanostructured Mg2Ni-Based Compound Containing Nb Additives: Maryam Mohri1; Seyed Farshid Kashani Bozorg1; 1University of Tehran

10:30 AMInfluence of Using MgCO3 and MgO as Initial Materials on the Synthesis of Pure Nanocrystalline Forsterite Powder: F. Tavangarian1; R. Emadi1; Ehsan Mohammadi Zahrani2; 1Isfahan University of Technology (IUT); 2The University of British Columbia

10:50 AMDevelopment of Colloidal Single-Sized Photoluminescent Quanmtum Dots with Bandgap Photoluminescence: Kui Yu1; Michael Hu2; 1National Research Council Canada; 2Oak Ridge National Laboratory


Advances in Composite, Cellular and Natural Materials: Functional Composite Materials Sponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: Nik Chawla, Arizona State University; Katsuyoshi Kondoh, Osaka University

8:30 AMPiezoelectric Smart Composites: Electromechanical Properties and Design Maps: T Venkatesh1; 1Stony Brook University

8:50 AMUltrahigh Piezoresistive Effect Induced by Field Emission at Sharp Nano-Tips on the Surface of Spiky Spherical Nickel Powders: Baoguo Han1; Jinping Ou1; 1Harbin Institute of Technology

9:10 AMExtreme Piezoresistivity of Silicone/Nickel Nanocomposites for High Resolution Large Strain Measurement: Oliver Johnson1; George Kaschner2; Thomas Mason2; David Fullwood1; Tommy Hyatt1; Brent Adams1; Kevin Cole1; George Hansen3; 1Brigham Young University; 2Los Alamos National Laboratory; 3Conductive Composites Company, LLC.

9:30 AMSynthesis and Microstructural Evolution of Sic/Si3n4/Si2n2o Nitride Porous Ceramic Composites Processed via HYSYCVD: Martin Pech-Canul1; Jose Flores-Garcia1; 1Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional

9:50 AMTransformation Plasticity in Rare Earth Orthophosphate/Orthovanadate Solid Solutions: Application to Fiber-Matrix Interphases in CMCs: Randall Hay1; Geoff Fair1; Emmanuel Boakye2; Pavel Mogilevsky2; Triplicane Parthasarathy2; 1AFRL; 2UES, Inc.

10:10 AM Break

10:30 AMCreep and Fatigue Interactions of Haynes 282 at Elevated Temperatures: Sara Longanbach1; Carl Boehlert1; 1Michigan State University

10:50 AMOxidation of NixZry/Zr-4 Composite Surfaces: Walter Luscher1; Edgar Gilbert1; Stan Pitman1; 1Pacific Northwest National Laboratory

11:10 AMLong Term Thermal Stability of Al2O3 Fiber (Sapphire) Reinforced NiAl Composites: Jia Song1; Weiping Hu1; Günter Gottstein1; 1Institute of Physical Metallurgy and Metal Physics, RWTH Aachen University

11:30 AMSynthesis and Deformation Behavior of Metal-Ceramic Nanolaminates: Danny Singh1; Nik Chawla1; Guanlin Tang2; Yu-Lin Shen2; Amit Misra3; Krishan Chawla4; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering; 2University of New Mexico/Department of Mechanical Engineering; 3Los Alamos National Lab/CINT; 4University of Alabama at Birmingham/Department of Materials Science and Engineering

11:50 AMStrengthening Behavior of Bilayer and Trilayer Cu-Based Nanocomposites: Aikaterini Bellou1; Nicole Overman1; David Bahr1; Hussein Zbib1; Ioannis Mastorakos1; Amit Misra2; 1Washington State University; 2Los Alamos National Laboratory

91

Technical Program

Wed

. AM

Alternative Energy Resources for Metals and Materials Production Symposium: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Energy CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Neale Neelameggham, U.S. Magnesium, LLC; Aldo Steinfeld, ETH Zurich; Robert Palumbo, Valparaiso University


Session Chairs: Ann Hagni, Ann Hagni Consulting, LLC; Robert Palumbo, Valparaiso University


8:35 AM KeynoteThe Global Scramble for Energy and Mineral Resources--Will the Move Towards Alternative Energy Sources Alleviate Our Import Problems?: Vincent Matthews1; 1Colorado Geological Survey

9:30 AMConceptual Process Plant Utility Schemes with Hybrid Energy System: Neale Neelameggham1; 1US Magnesium LLC

9:50 AMAdvanced Electrochemical Storage R&D at PNNL for Renewable Integration and Utility Applications: Zhenguo “Gary” Yang1; Cheng Hung1; Daiwon Choi1; Gordon Graff1; Jianzhi Hu1; Soowan Kim1; Jun Liu1; Xiaochun Lu1; Kerry Meinhradt1; Vince Sprenkle1; John Lemmon1; Donghai Wang1; Guan-Guang Xia1; 1Pacific Northwest National Laboratory

10:10 AM InvitedMetal Ferrite Spinels for Solar-Thermal Water Splitting REDOX Cycles: Alan Weimer1; 1University of Colorado

11:05 AMSolar Thermal Electrolytic Production of Metals from Their Oxides: Robert Palumbo1; 1Valparaiso University

11:25 AMCO2 Mitigation in Extractive Metallurgical Processes Using Concentrated Solar Energy: Aldo Steinfeld1; 1ETH Zurich

11:45 AMApplications of Concentrating Solar Power in Materials Production: Daniel Cook1; Jordan Mayorga1; Joseph Kopp1; Robert Boehm1; 1University of Nevada, Las Vegas

12:05 PMRadio-Thermionic Induced Reactions on Aluminum Based Materials and Their Correlation with Plasmon Formation and Tribocatalytic Mechanisms: John Elton1; James Cornwell1; 1Protective Systems, Inc.


Alumina and Bauxite: Process Improvements and Experiences - Red Side IISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Shawn Kostelak, Gramercy Alumina


8:40 AMEffect of Digesting Conditions on Physical Properties of Diaspore Red Mud: Li Bao1; Ting’an Zhang1; Zhihe Dou1; Guozhi Lv1; Xujian Wu1; Yongnan Guo1; Peiyuan Ni1; Jia Ma1; 1Northeastern University

9:10 AMExtracting Alumina from Coal Flyash through Sodium Aluminate Solution in Soda-Sintering and Acid-Leaching Process: Jilai Xue1; Li Yan1; Yun Zhu1; 1Unversity of Science and Technology Beijing

9:40 AM Break

10:00 AMImproved Performance of Red Mud Settlers at Worsley Alumina: Dane Eckart1; John Kildea2; Peter Prinsloo3; David Nicholson2; Everett Phillips4; 1Worsley Alumina Pty Ltd; 2Nalco Australia Pty Ltd; 3BHP Billiton; 4Nalco Company

10:30 AMRedundancy of Security Filtration: Peter-Hans ter Weer1; 1TWS Services and Advice

11:00 AMTricalcium Aluminate Hexahydrate (TCA) Synthesis and Characterization: Mamata Mohapatra1; S. Acharya1; 1Institute of Minerals and Materials Technology

11:30 AMEffect of Carbide Slag on High Pressure Digestion Properties of Diaspore: Wang Bo1; Sun Huilan1; Bi Shiwen2; 1Hebei University of Science and Technology; 2Northeastern University

Aluminum Alloys: Fabrication, Characterization and Applications: Fatigue and CorrosionSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: Tongguang Zhai, University of Kentucky

8:30 AMCorrosion-Fatigue Interactions in Hollow AA6XXX Alloy Extrusions: Nicholas Nanninga1; Calvin White2; 1NIST; 2Michigan Technological University

8:50 AMCorrosion Fatigue and Stress-Corrosion Crack Growth in Sensitized Al 5083: Peter Pao1; Ramasis Goswami2; Ronald Holtz1; 1Naval Research Laboratory; 2SAIC

9:10 AMEnvironmental Degradation of SCC-Affected Fatigue Life of High-Strength Aluminum Alloys and Prediction Methodology for Remaining Fatigue Life in Aging Aircraft: Yooin Jeong1; Hyunjung Lee2; Eungyeong Lee2; Haksu Kim2; Cheolju Lee1; Sangshik Kim2; 1Korea Aerospace Industries, LTD.; 2Gyeongsang National University

9:30 AMEffect of Heat Treatment on Corrosion Behavior of Aluminum-Lithium Alloy 8090: Amr Kobeisy1; Ahmed Metwali Abd El-Aziz1; Randa Abdel-Karim2; Abdel-Aziz Waheed3; 1German University in Cairo; 2Cairo University; 3Atomic Energy Authority

9:50 AMMulti-Axial Fatigue Behaviour of A356-T6: Matthew Roy1; Yves Nadot2; Daan Maijer1; 1The University of British Columbia; 2Ecole Nationale Supérieure de Méchanique et d’Aérotechnique (ENSMA)


92

Technical Program

Wed

. AM

10:10 AMProcessing of Ultra-Fine Grain Structure in Aluminium Alloy by Equal Channel Angular Pressing: Narasimhan Narayani1; Prasad Shanmugasandaram1; C. K. Gopalakrishnan1; R. Hariharan1; G. Swarupini1; S. Balasivananda Prabhu1; 1Anna University

10:30 AM Break

10:45 AMFatigue in Friction Stir Welded 7050 Al: Ashley Teare1; Adam Hein1; Aaron Wilkinson1; David Field1; Tracy Nelson2; 1Washington State University; 2BYU

11:05 AMEffects of Multipass Friction Stir Processing on Microstructure and Mechanical Properties of Al-Zn-Mg (7039) Alloy: Prashant Soni1; Bhagwati Kashyap1; N. Prabhu1; A.G. Rao1; V. Deshmukh1; 1IIT Bombay

11:25 AMInfluences of Tool Pin Profile and Welding Speed on the Formation of Friction Stir Welding of AA7075 and AA5083: Reza Behnagh1; Mohammad Kazem Besharati2; 1Tehran University; 2Department of Mechanical Engineering, Tehran University

11:45 AMTensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics: Ssu-Ta Chen1; Truan-Sheng Lui1; Li-Hui Chen1; 1Department of Material Science and Engineering, National Cheng Kung University

12:05 PMEffect of Porosity on the High-Cycle Fatigue Properties of 356 Casting Aluminum Alloy: Young-Jae Lee1; Kwang-Jun Euh2; Kyu-Sang Cho3; Kee-Ahn Lee4; 1Center for Advanced Green Materials Technology, Andong National University; 2Korea Institute of Material Science; 3Dongyang University; 4Andong National University

Aluminum Reduction Technology: Hall-Héroult Cell: Processes Modeling and Aluminium Smelter ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chairs: Marc Dupuis, GéniSim Inc; Daniel Richard, Hatch


8:40 AMMathematical Modeling of Aluminum Reduction Cell Potshell Deformation: Marc Dupuis1; 1GéniSim Inc

9:10 AMThe Use of CFD Simulations to Optimise Ventilation of Potrooms: André Maarschalkerwaard1; 1Colt Technology

9:40 AMSafe and Efficient Traffic Flow for Aluminum Smelters: Laszlo Tikasz1; Charles Read1; Robert Baxter1; Rafael Pires1; Robert McCulloch1; 1Bechtel

10:10 AMDevelopment and Application of an ANSYS® Based Thermo-Electro-Mechanical Anode Stub Hole Design Tool: Marc Dupuis1; 1GéniSim Inc

10:40 AM Break

10:50 AMEffects of High Temperatures and Pressures on Cathode and Anode Interfaces in a Hall-Heroult Electrolytic Cell: Lyne St-Georges1; 1UQAC

11:20 AMDesign of a Bypass Joint for the Aluminum Reduction Cells.: Yimy Sarkis1; 1Morochos JJ C.A.

11:50 AM3D Freeze Shape Study of the Aluminum Electrolysis Cells Using Finite Element Method: Cui Xifeng1; Zhang Hongliang1; Zou Zhong1; Li Jie1; Lai Yanqing1; Xu Yujie1; Zhang Hehui1; Lv Xiaojun1; 1Central South University


Aluminum Reduction Technology: Hall-Héroult Cell: Processes Modeling and MeasurementsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chairs: Nobuo Urata, Alumilab; James Evans, University of California, Berkeley


8:35 AMCFD Modelling of Effect of ACD and Anode Size on Alumina Mixing in Aluminium Reduction Cells: Yuqing Feng1; Mark Cooksey1; Phil Schwarz1; 1CSIRO Minerals

9:00 AMTerminating Anode Effects by Lowering and Raising the Anodes - A Closer Look at the Mechanism: Jomar Thonstad1; Helmut Vogt2; 1Norwegian University Sc. Technology; 2TFH, University of Applied Sciences

9:25 AMBath Temperature Inference through Soft Sensors Using Neural Networks: Fabio Soares1; Roberto Limao2; Marcos Castro3; 1Exodus; 2UFPA; 3Albras

9:50 AMThe Determination of Pot Current Distribution by Measuring Magnetic Fields: Nobuo Urata1; James Evans2; 1Alumilab; 2UC, Berkeley

10:15 AM Break

10:25 AMBusbar Circuit Design and Installation for Boosting Already Boosted Pots: Daniel Champagne1; Donald Ziegler2; Andre Schneider1; Daniel Richard1; 1Hatch; 2Alcoa

10:50 AMStudy of Surface Oscillation of Liquid Aluminum in 168kA Aluminum Reduction Cells with a New Type of Cathode Design: Wang Ziqian1; Feng Naixiang1; Peng Jianping1; Wang Yaowu1; Qi Xiquan2; 1Northeastern University; 2Northeastern University Engineering & Research Institute Co. Ltd.

11:15 AMModelling and Optimization of Busbar Configuration in Aluminum Electrolysis Cell with Genetic Algorithm: Mao Li1; 1Central South University


93

Technical Program

Wed

. AM

Biological Materials Science: Mechanical Behavior of Biological Materials III: Soft Tissues and MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chairs: Po-Yu Chen, University of California, San Diego; Roger Narayan, NC State/UNC Chapel Hill

8:30 AM InvitedUsing Optical Tweezers to Probe Mechanical Response from Single Molecules to Soft Biological Materials: Nancy Forde1; 1Simon Fraser University

9:00 AM InvitedInvestigating the Structure-Properties Relationship of the Cornea and Sclera: Brad Boyce1; Thao Nguyen2; 1Sandia National Laboratories; 2Johns Hopkins University

9:30 AM InvitedPolymer Mechanics Models the Fraction of Cartilage Stress Relaxation Not Caused by Fluid Flow: David Fyhrie1; R. June2; Corey Neu3; Justin Barone4; 1University of California, Davis; 2University of California, San Diego School of Medicine; 3Purdue University; 4Virginia Technological University

10:00 AMStimulated Cellular Response of Novel Hybrid Bimodal Network Elastomers for Soft Tissue Implants: Wah Wah Thein-Han1; Jinesh Shah1; Devesh Misra1; 1University of Louisiana

10:20 AM Break

10:30 AM KeynoteNanomechanical Properties of Biological Tissues – Pushing the Boundaries of Nanoindentation Testing: Michelle Dickinson1; 1Auckland University

11:10 AMDynamic Nanoindentation of Articular Cartilage: Oliver Franke1; Mathias Göken2; Marc Meyers3; Karsten Durst2; Andrea Hodge4; 1MIT; 2University of Erlangen; 3University of California, San Diego; 4University of Southern California

11:30 AMNanoindentation of Ultrasoft Biological Materials: Vinod Nayar1; Andrea Hodge2; James Weiland3; 1University of Southern California - Department of Biomedical Engineering; 2University of Southern California - Department of Aerospace & Mechanical Engineering; 3University of Southern California - Keck School of Medicine

11:50 AMQuantitative Viscoelasticity Measurements of Biological Materials by Atomic Force Acoustic Microscopy: Arnaud Caron1; Ansgar Hohmann2; Erhard Stupperich3; Franz-Günter Sander2; Hans-Jörg Fecht1; 1Institute of Micro- and Nanomaterials, University Ulm; 2Department of Orthodentics, University Ulm; 3Institute of Microbiology and Biotechnology, University Ulm

12:10 PMMulti-Scale Mechanisms of Osteogenesis Imperfecta Disease in Collagenous Tissues: Markus Buehler1; Alfonso Gautieri1; Sebastien Uzel1; 1Massachusetts Institute of Technology

Bulk Metallic Glasses VII: Fatigue and CorrosionSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: D. Gary Harlow, Lehigh University; Annett Gebert, Leibniz-Institute for Solid State and Materials Research IFW Dresden

8:30 AM InvitedA Fracture Mechanics Model of Fatigue Crack Propagation in Bulk-Metallic Glasses: Xiaoqing Jin1; Leon Keer1; Gongyao Wang2; Peter Liaw2; 1Northwestern University; 2The University of Tennessee

8:50 AMMechanisms of Fatigue Crack Growth in Zr-Based Bulk Metallic Glasses: Jamie Kruzic1; Sarah Philo1; Maximilien Launey2; 1Oregon State University; 2Lawrence Berkeley National Laboratory

9:00 AM InvitedEffect of Stress Gradient on Fatigue Strength of Zr-Based Bulk Metallic Glass: Yoshikazu Nakai1; Kohei Fujihara1; Naoki Sei1; Kunihiro Ando1; Bok-Key Kim2; 1Kobe University; 2Myongji College

9:20 AMNear-Threshold Fatigue Crack Growth in Metallic Glass Matrix Composites: Kombaiah Boopathy1; Douglas Hofmann2; William Johnson3; Upadrasta Ramamurty1; 1Indian Institute of Science; 2Liquidmetal Technologies; 3California Institute of Technology

9:30 AM InvitedFracture and Fatigue of Zr- and Ti-Based Metallic Glass In-situ Matrix Composites: Maximilien Launey1; Douglas Hofmann2; William Johnson2; Robert Ritchie3; 1Lawrence Berkeley National Laboratory; 2California Institute of Technology; 3University of California Berkeley

9:50 AMEffects of Laser-Surface Modification on Bending-Fatigue Characteristics of Zr-Based Bulk Metallic Glasses: Ritesh Sachan1; G.Y. Wang1; P.K. Liaw1; Ramki Kalyanaraman1; 1University of Tennessee-Knoxville

10:00 AM Break

10:10 AM InvitedStatistical Aspects of Fatigue for Bulk-Metallic Glasses: D. Gary Harlow1; Gongyao Wang2; Peter Liaw2; Yoshihiko Yokoyama3; 1Lehigh University; 2University of Tennessee; 3Tohoku University

10:30 AMZr-Base Glass-Forming Film for Fatigue Property Improvements of 316L Stainless Steel: Jinn Chu1; Cheng-min Lee1; Peter Liaw2; 1Nation Taiwan University of Science and Technology; 2The University of Tennessee

10:40 AM InvitedEffect of Surface Finishing and Mechanically Induced Defects on the Corrosion of Bulk Metallic Glasses: Annett Gebert1; 1Leibniz-Institute for Solid State and Materials Research IFW Dresden

11:00 AMFatigue Behavior of Tough Fe-Based Bulk-Metallic Glasses: Gongyao Wang1; Marios Demetriou2; Russell Graves1; Peter Liaw1; William Johnson2; 1University of Tennessee; 2California Institute of Technology

11:10 AM InvitedStress-Assisted Corrosion of Cu-Based Bulk Metallic Glass: Ding Li1; Fuqian Yang1; Peter K. Liaw2; 1University of Kentucky; 2University of Tennessee


94

Technical Program

Wed

. AM

11:30 AMBiocompatibility of Zr-Based Bulk Metallic Glasses: Effects of Micro-Alloying and Surface Roughness: Lu Huang1; Zheng Cao2; Wei He2; Harry Meyer3; Peter Liaw2; Elena Garlea4; Shujie Pang1; Tao Zhang1; 1Beijing University of Aeronautics and Astronautics; 2University of Tennessee, Knoxville; 3Oak Ridge National Laboratory; 4Y12 National Security Complex

11:40 AMCompression-Compression Fatigue Behavior of Zr-Based Bulk-Metallic Glasses: Gongyao Wang1; P. Liaw1; Y. Yokoyama2; R. Graves1; A. Inoue2; 1University of Tennessee; 2Institute for Materials Research

11:50 AM InvitedCorrosion Behaviors of Fe41Co7Cr15Mo14C15B6Y2 Bulk Metallic Glass in Sulfuric Acid Solutions: Jun Shen1; 1Harbin Institute of Technology

Cast Shop for Aluminum Production: Direct Chill and Conveyor CastingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: John Grandfield, Grandfield Technology Pty Ltd; Pierre Le Brun, Alcan Voreppe Research Center


Session Chair: Gerd-Ulrich Grün, Hydro Aluminium Deutschland GmbH

8:30 AMMicrosegregation of Direct Chill Ingot of Super High Strength Aluminum Alloy Cast from Heavily Electromagnetically Stirred Melt: Takateru Umeda1; Pramote Thirathipviwat1; Mawin Suparadist1; Hiromi Nagaumi2; 1Chulalongkorn University; 2Nippon Light Metal

8:55 AMUtilizing Safety Pit Coating Repair Kits to Prevent Production Stoppages: Alex Lowery1; Joe Roberts2; 1Wise Chem LLC; 2Pyrotek Inc.

9:20 AMEffect of Application of out-of-Phase Electromagnetic Field on Horizorntal Direct Chill Casting of 7075 Aluminum Alloy: Qingfeng Zhu1; Zhihao Zhao1; Xiangjie Wang1; Jianzhong Cui1; 1Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University

9:45 AMNext Generation of Almex Direct Chill Tooling Systems: Shaun Hamer1; 1Almex USA Inc.

10:10 AMThermal Assessment of the Casting Operation at IMASA Shop: Claudio Méndez1; César Sánchez1; Gabriel Plascencia1; Marco Rubio2; David Jaramillo1; 1CIITEC - IPN; 2IMASA S.A. deC.V.

Characterization of Minerals, Metals and Materials: Characterization of PMC’s, Composites, Fibers, Polymers, and OrganicsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Mingdong Cai, Exova; Jeong Guk Kim, Korea Railroad Research Institute

8:30 AMWeibull Analysis of Tensile Tested Piassava Fibers with Different Diameters: Denise Cristina Nascimento1; Ludy Motta1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

8:50 AMThermal Analysis of Curaua Fiber Reinforced Polyester Matrix Composites: Ailton Ferreira1; Ruben Jesus Rodriguez1; Felipe Lopes1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

9:10 AMThermographic Characterization of Damage Evolution in Polymer Matrix Composites: Jeongguk Kim1; Sung Cheol Yoon1; Jung-Seok Kim1; Hyuk-Jin Yoon1; Sung-Tae Kwon1; 1Korea Railroad Research Institute

9:30 AMCharacterization of the Flexural Properties of Polyester Matrix Composites Reinforced with Continuous Jute Fibers: Sergio Monteiro1; Leandro Marques1; Kestur Satyanarayana2; 1State University of the Northern Rio de Janeiro - UENF; 2Federal University of Parana (UFPR)

9:50 AMCharpy Toughness Behavior of Continuous Sisal Fiber Reinforced Polyester Matrix Composites: Wellington Inácio1; Felipe Lopes1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

10:10 AMEvaluation of the Interfacial Strength of Ramie Fibers in Polyester Matrix Composites: Frederico Margem1; Felipe Lopes1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

10:30 AMPatterning Atop Shape Memory Polymers and Their Characterization: Y. Zhao1; Mingdong Cai2; Weimin Huang1; T. H. Tong3; 1Nanyang Technological University; 2Exova Group Ltd and Southeast University; 3Cornerstone Research Group Inc.

10:50 AMCharacterization of a Natural Biofoam from the Buriti Palm Tree: Lucas Costa1; Sergio Monteiro1; Tammy Portela1; Nubia Santos2; Cecília Zavaglia2; 1State University of the Northern Rio de Janeiro - UENF; 2State University of Campinas - UNICAMP

11:10 AMCharacterization of Fibers from Different Parts of the Buriti Palm Tree: Tammy Portela1; Lucas Costa1; Felipe Lopes1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

11:30 AMTensile Properties of Epoxy Composites Reinforced with Continuous Curaua Fibers: Felipe Lopes1; Ailton Ferreira1; Sergio Monteiro1; 1State University of the Northern Rio de Janeiro - UENF

95

Technical Program

Wed

. AM

11:50 AMCharacterizing the Mechanical Properties of Wax-Coated Granular Composites: John Bridge1; Michael Peterson2; Ryan Beaumont3; 1Maine Maritime Academy; 2University of Maine; 3R.M. Beaumont Corporation

12:10 PMMechanical Behavior of Polyester Matrix Composites Reinforced with Continuous Bamboo Fibers: Lucas Costa1; Sergio Monteiro1; Rômulo Loiola1; 1State University of the Northern Rio de Janeiro - UENF

Computational Thermodynamics and Kinetics: Phase Field, CALPHAD and Other Modeling TechniquesSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Jeffrey Hoyt, McMaster University; Dallas Trinkle, Univeristy of Illinois at Urbana-Champaign



8:30 AMA Phase Field Study on the Growth and the Interaction of Ni 4Ti 3 Precipitates in Niti Shape Memory Alloy: Wei Guo1; Ingo Steinbach1; Christoph Somsen2; Gunther Eggeler2; 1Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr-University Bochum; 2Institut für Werkstoffe, Ruhr-University Bochum

8:50 AMA Mixed-Mode Model for Precipitation in Al-Mg-Si Alloys: Abbas Bahrami1; Alexis Miroux2; Jilt Sietsma1; Leo Kestens1; 1Materials Science and Engineering Department, Technical University of Delft (TuDelft); 2Materials to Innovation Institute (M2i)

9:10 AMThermodynamics, Structural Properties and Transformation Behavior of CoNiGa Alloys from First Principles: Raymundo Arroyave1; Anchalee Junkaew1; Andres Garay1; Arpita Chari1; Chun-Wei Yao1; 1Texas A&M University

9:30 AMPressure-Induced Invar Behavior in Pd3Fe: Michael Winterrose1; Matt Lucas1; Alan Yue1; Itzhak Halevy1; Lisa Mauger1; Jorge Munoz1; Jingzhu Hu2; Michael Lerche3; Brent Fultz1; 1Caltech; 2NSLS; 3HPSynC

9:50 AMExplaining the Change in Diffusion Mechanism in the Series of L12 Phases In3R (R= Rare-Earth): John Bevington1; Matthew Zacate2; Gary Collins1; 1Washington State University; 2Northern Kentucky University

10:10 AMDiffusion of Interstitial and Substitutional Elements in γ/γ’ Interface in Ni-Al Superalloys: A First Principles Study: Priya Gopal1; Peter Wagner2; Srinivasan Srivilliputhur1; Gregor Mori2; 1University of North Texas, Denton; 2University of Leoben

10:30 AM Break

10:40 AMModelling Ordering Phenomena in Condensed Phases: Bo Sundman1; Mauro Palumbo2; Suzana Fries2; 1CEA; 2Ruhr University Bochum

11:00 AMModeling of Phase Separation in Uranium-Zirconium Alloys via Monte Carlo Methods: Benjamin Beeler1; Benjamin Good1; Chaitanya Deo1; Sergey Rashkeev2; Maria Okuniewski2; Mike Baskes3; 1Georgia Institute of Technology; 2Idaho National Laboratory; 3Los Alamos National Laboratory

11:20 AMThermodynamics Calculation and Phase-Field Simulation of Morphotropic Phase Boundary in (001) Bifeo3 Thin Films: Guang Sheng1; Jingxian Zhang1; Robert Zeches2; Jinxing Zhang2; Alexander Melville3; Jon Ihlefeld3; Venkatraman Gopalan1; Darrel Schlom3; Lane.W Martin4; Ramamoorthy Ramesh2; Zi-Kui Liu1; Long-Qing Chen1; 1The Pennsylvania State University; 2University of California, Berkeley; 3Cornell University; 4Lawrence Berkeley National Laboratory

11:40 AMCALPHAD Modeling of the Al-Cr-Ni System Supported by First Principles Calculations: Wren Chan1; Michael Gao2; 1Carnegie Mellon University; 2National Energy Technology Laboratory

12:00 PMOccupancy Probability of a Sublattice of D022-Ni3V in Ni-Al-V System:Determined by Microscopic Phase Field: Jing Zhang1; Houchuang Zhuang1; Zheng Chen1; 1Northwestern Polytechnical University

12:20 PMKinetic Monte Carlo Study of Sputter-Induced Morphological Patterns in Alloy Surfaces: Bharathi Srinivasan1; Ramanarayan Hariharaputran1; 1Institute of High Performance Computing

Cost-Affordable Titanium III: Creative Processing and Property Enhancement ISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: Curt Lavender, Pacific Northwest National Laboratory; Vasisht Venkatesh, TIMET Inc

8:30 AMDevelopment Pathways to Low-Cost Engineering Beta Gamma TiAl Alloys: Young-Won Kim1; 1Development Pathways to Low-Cost Engineering Beta Gamma TiAl Alloys

8:55 AMMicrostructure and Mechanical Properties of A’ Martensite Type Ti-V-Al Alloy after Cold- or Hot Working Process: Hiroaki Matsumoto1; Hiroshi Yoneda1; Kazuhisa Sato1; Toyohiko Konno1; Akihiko Chiba1; 1Institute for Materials Research, Tohoku University

9:20 AMEffect of Oxygen on Phase Precipitation and Mechanical Functionality in Ti-29Nb-13Ta-4.6Zr: Mitsuo Niinomi1; Masaaki Nakai1; Toshikazu Akahori1; Harumi Tsutsumi1; 1Tohoku University

9:45 AMLocal Heat Treatment of Titanium Alloys: Microstructure and Mechanical Properties: Pavlo Markovsky1; 1G.V. Kurdyumov Institute for Metal Physics, NAS of Ukraine

10:10 AM Break

10:25 AMThe Relative Contribution of Factors Influencing the Flow and Thermal Fields in Electron Beam Casting of Ti-6Al-4V: Tao Meng1; Daan Maijer1; Steven Cockcroft1; Riley Shuster1; Denis Favez1; David Tripp2; Stephen Fox3; 1The University of British Columbia; 2TIMET Morgantown; 3TIMET Henderson

10:50 AMThe Influence of Surface Treatments and Subsequent Annealing on the Fatigue Performance of Ti-6Al-4V for Biomedical Applications: Milos Janecek1; Jaroslav Fencl2; Lothar Wagner3; Robert Kral1; Josef Strasky1; 1Charles University; 2Beznoska, Ltd.; 3Clausthal University of Technology


96

Technical Program

Wed

. AM

11:15 AMMicrostructure-Properties of Cast Ti-5Al-5Mo-5V-3Cr with Elevated Oxygen Levels: Edward Chen1; D. R. Bice1; J. A. Hall2; 1Transition45 Technologies, Inc.; 2Wah Chang

11:40 AMElevated-Temperature Fatigue Behavior of Boron-Modified Ti-6Al-4V: Wei Chen1; Carl Boehlert1; Jane Howe2; Seshacharyulu Tamirisakandala3; Daniel Miracle4; 1Michigan State University; 2Oak Ridge National Lab; 3FMW Composite Systems Inc.; 4US Air Force

Electrode Technology for Aluminum Production: Anode Green MillSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Lorentz Lossius, Hydro Aluminium AS


8:35 AMUse of Eddy Current Separator in Butts Processing: Juraj Chmelar1; Hogne Linga1; 1Hydro

9:00 AMFrom Technology Development to Successful Start-Up and Operations of Sohar: The Potential of the Bi-Eirich Mixing Line: François Morales1; Magali Gendre1; Nigel Backhouse1; Berthold Hohl2; David Stephenson3; Mohammed Al Balushi3; 1Rio Tinto Alcan; 2Maschinenfabrik Gustav Eirich; 3Sohar Aluminium

9:25 AMNew Design of Process Area Based on Math Modelling and Simulation for Buss Kneader Principle in the Application of Green Anode Paste Preparation: Hans-Ulrich Siegenthaler1; Joel Stampfli1; 1Buss AG

9:50 AMAluchemie Back to Benchmark: Patrick Claudel1; Erwin Smits1; 1Aluchemie / Rio Tinto Alcan

10:15 AM Break

10:30 AMSuccessful Start up of the Combined Rhodax® and IMC® Processes at the Sohar Smelter: André Pinoncely1; Jean Bigot2; Christophe Bouche3; 1Solios Carbone; 2Rio Tinto Alcan; 3Fives Solios

10:55 AMAmelios™, A Performance Analysis Tool for Green Anode Plant: Christophe Bouche1; Oussama Cherif Idrissi El Ganouni2; André Molin1; 1Solios Carbone; 2Fives

11:20 AMAnode Paste Plants: Innovative Solution for Optimum Emission Performances: Hugues Vendette1; 1Solios Environnement Inc.

General Abstracts: Light Metals Division: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Magnesium Committee, TMS: Recycling and Environmental Technologies Committee, TMS: Energy Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Alan Luo, General Motors Corporation; Eric Nyberg, Pacific Northwest National Laboratory


Session Chair: Alan Luo, General Motors Research & Development Center

8:30 AMAlcoa Alumina Refinery Secures Future through Reliability Excellence Efforts: John Kalpoe1; Keith Johnson2; 1Suralco Alumina Refinery; 2Life Cycle Engineering

8:50 AMApplication of ECAP on Commercial Purity Aluminum: Nilufer Evcimen1; Yahya Bayrak1; Ahmet Ekerim1; 1Yildiz Technical University

9:10 AMAssessment of Casting Filling by Modelling Surface Entrainment Events Using CFD: Mark Jolly1; Carl Reilly1; Nick Green1; 1University of Birmingham

9:30 AMBehavior of MgO during Forming and Leaching Process of Calcium Aluminate Slag: Wang Bo1; Sun Huilan1; Bi Shiwen2; 1Hebei University of Science and Technology; 2Northeastern University

9:50 AMEffect of Variables on Deposit Characteristics of Aluminum from EMIC-AlCl3 Ionic Liquid Electrolytes: Debabrata Pradhan1; Ramana Reddy1; 1The University of Alabama

10:10 AM Break

10:30 AMEffects of Microstructure on Fatigue Crack Growth Behavior of 6061-T6 Wrought Alloys: Anastasios Gavras1; Brendan Chenelle1; Diana Lados1; 1Worcester Polytechnic Institute

10:50 AMElectrochemical Characterization of the Al-Mg Foamed Materials in NaCl Solutions: S. Valdez1; S. Casolco2; H. Castañeda3; 1UNAM-ICF; 2ITESM-Puebla; 3Battelle Memorial Institute

11:10 AMEffect of Variables on Deposit Characteristics of Aluminum from EMIC-AlCl3 Ionic Liquid Electrolytes: Debabrata Pradhan1; Ramana Reddy1; 1The University of Alabama

11:30 AMEffects of Volume Percent and Aspect Ratio of Short Carbon Fiber on Mechanical Properties of Reinforced Aluminum Matrix Composites: Yan Pengfei1; Yao Guangchun1; Shi Jianchao1; Mu Yongliang1; 1School of Materials & Metallurgy, Northeastern University

11:50 AMEffective Capital Management – A Case Study: Joe Petrolito1; Martin Richard2; 1Hatch; 2Alcoa

97

Technical Program

Wed

. AM

General Abstracts: Materials Processing and Manufacturing Division: Microstructure, Characterization, and ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Global Innovations Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Phase Transformations Committee, TMS: Powder Materials Committee, TMS: Process Technology and Modeling Committee, TMS: Shaping and Forming Committee, TMS: Solidification Committee, TMS: Surface Engineering CommitteeProgram Organizers: Thomas Bieler, Michigan State University; Corbett Battaile, Sandia National Laboratories



8:30 AMImproving Creep Properties through Grain Boundary Engineering: Milo Kral1; Daniel Drabble1; 1University of Canterbury

9:10 AMModeling the Anisotropic Properties of Tantalum Taylor Impact Specimens: Michael Nixon1; Joel House1; Brian Plunkett1; Joel Stewart1; 1USAF AFRL

9:30 AMNeural Networks Modeling of Mechanical Properties in Medium Carbon Steels: N. S. Reddy1; Jae Sang Lee1; Yang Mo Koo1; 1GIFT, POSTECH, Pohang, Korea

9:50 AMMathematical Modelling of an Annealing Furnace for Process Control Applications: Nick Depree1; James Sneyd1; S. Taylor1; Mark Taylor1; M. O’Connor2; John Chen1; 1University of Auckland; 2New Zealand Steel Ltd.

10:10 AM Break

10:30 AMDynamic Abnormal Grain Growth in Alpha Iron: Phi Thanh1; George Kaschner2; J.P. Delplanque1; Joanna Groza1; 1UC Davis; 2Los Alamos National Labs

10:50 AMA Study on the Behavior of Boron in Low Carbon Steel by Neutron Autoradiography: Dong Jun Mun1; Kyung Chul Cho1; Eun Joo Shin2; Jae Sang Lee1; Yang Mo Koo1; 1Pohang University; 2Korea Atomic Energy Research Institute

11:10 AMFlexure Strength and Hydrothermal Degradation of 3mol% Yttria-Stabilized Zirconia (3Y-TZP): Microwave vs. Conventional Sintering: Kirk Wheeler1; Pedro Peralta1; Scott Atkin2; 1Arizona State University; 2Creative Dental Laboratories

11:30 AMNovel Pathways to Hydrogen Dissociation and Diffusion on Pd Alloys: Heather L. Tierney1; Ashleigh E. Baber1; John R. Kitchin2; E. Charles H. Sykes1; 1Tufts University; 2Carnegie Mellon University

11:50 AMAn Investigation on the Flow Behavior of Metals when Forging Specimens Having Different Cross Sections: Bashir Raddad1; 1University of Alfateh, Mechanical Department

General Abstracts: Structural Materials Division: Non-Ferrous MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Composite Materials Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Mechanical Behavior of Materials Committee, TMS/ASM: Nuclear Materials Committee, TMS: Refractory Metals Committee, TMS: Titanium CommitteeProgram Organizers: Eric Ott, GE Aviation; Robert Hanrahan, National Nuclear Security Administration; Judith Schneider, Mississippi State University

Wednesday AM Room: 3AFebruary 17, 2010 Location: Washington State Convention Center


8:30 AMA Creep Rupture Time Model for Anisotropic Creep-Damage of Transversely Isotropic Materials: Calvin Stewart1; Ali Gordon1; 1University of Central Florida

8:50 AMComparison of Deformation Mechanisms for Constant Strain Rate and Creep Testing of a Ni-Based Superalloy: Hallee Deutchman1; Raymond Unocic1; Michael Mills1; 1The Ohio State University

9:10 AMA Combinatorial Approach to Investigate Solid Solution Hardening in Ni-Based Systems by Nanoindentation: Oliver Franke1; Karsten Durst2; Mathias Göken2; 1MIT; 2University of Erlangen

9:30 AMSingle-Crystal Solidification of New Co-Al-W Base Superalloys: Masafumi Tsunekane1; Akane Suzuki2; Tresa Pollock1; 1University of Michigan; 2GE Global Research

9:50 AM Break

10:10 AMNucleation of Extension Deformation Twins in α-Ti: Leyun Wang1; Yiyi Yang1; Martin Crimp1; Philip Eisenlohr2; Darren Mason3; Thomas Bieler1; 1Michigan State University; 2Max-Planck-Institut für Eisenforschung GmbH; 3Albion College

10:30 AMInfluence of Grain Boundary Sliding on Diffusion in Yttria Stabilized Tetragonal Zirconia: Santonu Ghosh1; Sathya Swaroop2; Peter Fielitz3; Guenter Borchardt3; Atul Chokshi1; 1Indian Institute of Science; 2VIT University; 3Technische Universitat, Clausthal

10:50 AMConstitutive Response of Polymers, Filled and Unfilled, as a Function of Temperature and Strain-Rate: Eric Brown1; Carl Cady1; George Gray III1; Mathew Lewis1; Dana Dattelbaum1; 1Los Alamos National Laboratory

11:10 AMShape Memory Behavior of an Ultra-Fine Grained Ti-30Ni-20Pd Alloy through Equal Channel Angular Extrusion (ECAE) Processing: Rabindra Mahapatra1; Charles Lei1; 1Naval Air Systems Command

11:30 AMHigh Temperature Creep-Fatigue Crack Growth Models: Jeffrey Evans1; 1University of Alabama in Huntsville


98

Technical Program

Wed

. AM

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Innovations in Primary and Secondary Forming - NickelSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Dan Sanders, Boeing Corporation; Lee Semiatin, AFRL-RX

8:30 AM InvitedTechnical and Manufacturing Innovations Required to Meet Global Aerospace Requirements for the 21st Century: Anthony Banik1; 1ATI Allvac/Allegheny Technologies

9:00 AM InvitedSome Challenges in Current and Future Superalloy Production: Lesh Patel1; 1Special Metals Corp

9:30 AMAccelerating Insertion of Materials at GE Aviation: Deborah Whitis1; Arturo Acosta1; Shesh Srivatsa1; Daniel Wei1; 1General Electric Company

9:50 AMConstitutive Model of Superplastic and Power-Law Creep Deformation during Isothermal Forging of P/M Alloy René 88DT: Wen Tu1; Tresa Pollock1; 1University of Michigan

10:10 AM Break

10:30 AMγ – γ’ – δ Ternary Eutectic Ni-Base Superalloys Alloys Amenable for Manufacture: Yijing Shi1; Alejandro Rodriguez1; Mengtao Xie1; Randy Helmink2; Mark Hardy3; Sammy Tin1; 1Illinois Institute of Technology; 2Rolls-Royce Corporation; 3Rolls Royce plc

10:50 AMMicrostructure and Properties of Platinum-Group-Metal Modified Nickel-Base Superalloys: Adam Pilchak1; Donald Weaver2; Donna Ballard2; S. Semiatin2; 1Universal Technology Corporation; 2Air Force Research Laboratory

11:10 AMModelling the Effect of Initial Heat-Treatment on the Creep of Multi-Modal Nickel Superalloys: James Coakley1; Hector Basoalto2; David Dye1; 1Imperial College; 2QinetiQ

11:30 AMFlow Behavior of Superalloy 945 during High Temperature Deformation: Steve Coryell1; Kip Findley1; Martin Mataya1; 1Colorado School of Mines

11:50 AMMicrostructure Based Monotonic Stress-Strain Modeling of R-104 as a Function of Temperature: Sujoy Kar1; Sanjay Sondhi1; Daniel Wei2; David Mourer2; 1GE Global Research; 2GE Aviation

12:10 PMEffects of Temperature, Deformation Strain, and Slow Transfer on the Microstructure and Mechanical Properties of 304L Stainless Steel Forgings: Nathan Switzner1; Robert Bergen2; Jamie McQueen1; James Knutson1; 1Honeywell FM&T; 2Precision Metal Products, Inc

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session VSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



8:30 AM InvitedOrder-Disorder in the Phase Field Crystal Model: Jeffrey Hoyt1; Ken Elder2; 1McMaster University; 2Oakland University

9:00 AM InvitedPhase Equilibria, Microstructural Evolution and Coarsening Kinetics In “Inverse” Ni3Ge (γ’)-Ni(Ge) (γ) Alloys: Alan Ardell1; Yong Ma2; 1National Science Foundation; 2UCLA

9:30 AM InvitedPhase Field Crystals: Atomistic Simulations on Diffusive Timescales: Kuo-An Wu1; Peter Voorhees1; 1Northwestern University

10:00 AM Break

10:30 AM InvitedPhase Field Modeling of the Martensitic Transition: Intermittent Dynamics and Self-Organized Criticality: Alphonse Finel1; Oguz Salman1; 1ONERA

11:00 AM InvitedQuantitative Phase-Field Simulations of Growth and Coarsening in Polycrystalline Multi-Component and Multi-Phase Materials: Nele Moelans1; Liesbeth Vanherpe2; Jeroen Heulens1; Bert Rodiers3; Bart Blanpain1; Patrick Wollants1; 1K.U. Leuven, dept. Materials Science and Engineering; 2K.U. Leuven, Dept. Computer Science; 3LMS International

11:30 AM3D-Microstructures at the Atomic Scale: A Monte Carlo Method with Elastic Interactions: Varvenne Celine1; Alphonse Finel1; Mathieu Fevre1; Yann Le Bouar2; 1ONERA; 2CNRS

11:50 AM InvitedEffect of Biaxial Strain on Phase Stability and Microstructure Development in Single-Crystal Films: Long Qing Chen1; 1Pennsylvania State University

Jim Evans Honorary Symposium: Primary and Secondary Production of MetalsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons




8:40 AMLow Cost TiCl4, the Indispensable Compound to Make Titanium: James Withers1; J. Laughlin1; Y. Elkadi1; A. Putilin1; R. Loutfy1; 1MER Corporation

99

Technical Program

Wed

. AM

9:05 AMThe Optimization of the Coke and Agglomerate Quantity in Lead Production in “Water-Jacket” Furnace: Ahmet Haxhiaj1; Egzon Haxhiaj2; 1University of Prishtina; 2American University in Kosovo

9:30 AMWireless Instrumentation of Aluminum Smelting Operatings: Dan Steingart1; James Evans2; Paul Wright2; 1City College of New York; 2Wireless Industrial Technologies

9:55 AM Break

10:10 AMThe Development of Product Microstructure “Morphology Maps” and their Significance in Describing the Decomposition of Solids: Peter Hayes1; 1University of Queensland

10:35 AMDevelopment and Application of Dynamic Soft Reduction Technology for Continuous Casting Machine: Cheng Ji1; Miaoyong Zhu1; 1Northeastern University of China

11:00 AMTransient Behavior of Inclusion Chemistry, Shape and Structure in Fe-Al-Ti-O Melts: Effect of Titanium/Aluminum Ratio: Cong Wang1; Sridhar Seetharaman1; 1Carnegie Mellon University

Magnesium Technology 2010: Cast Alloys, Casting, and Grain RefinementSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Mei Li, Ford Motor Company; Norbert Hort, GKSS Research Center

8:30 AMEffects of Section Thicknesses on Tensile Properties of Permanent Mould Cast Magnesium Alloy AJ62: Jonathan Burns1; Lihong Han1; Henry Hu1; Xueyuan Nie1; 1University of Windsor

8:50 AMGrowth Restriction Factor Effects near the Surface of High Pressure Die Cast Mg-Al Binary Alloys: Anumalasetty Nagasekhar1; Carlos Caceres1; Mark Easton2; 1The University of Queensland; 2Monash University

9:10 AMStrengthening Mechanisms in Mg-Al-Sn Based Alloys: Shaul Avraham1; Alexander Katsman1; Menachem Bamberger1; 1Technion- Israel Institute of Technology

9:30 AMNumerical Simulation and Experimental Study of Squeeze Casting Magnesium Alloy AM50: Zhizhong Sun1; Henry Hu1; Alfred Yu1; 1University of Windsor

9:50 AMSection Thickness and the Skin Effect in a High Pressure Die Cast Mg-12%Al Alloy: Kun Yang1; Anumalasetty Nagasekhar1; Carlos Caceres1; 1The University of Queensland

10:10 AMInvestigations on Microstructure and Properties of Mg-Sn-Ca Alloys with 3% Al Additions: Fady Elsayed1; Tarek Abuleil1; Ahmed Abd El-Aziz2; Karl Kainer1; Norbert Hort1; 1GKSS Forschungszentrum Geesthacht GmbH; 2Department of Materials Science, German University in Cairo

10:30 AMSimulation of Stresses during Casting of Binary Magnesium-Aluminum Alloys: Matthew Pokorny1; Charles Monroe1; Christoph Beckermann1; Z. Zhen2; Norbert Hort2; 1University of Iowa; 2GKSS Research Centre Geesthacht

10:50 AMStudy on the Microstructure Changes during the In Situ Tensile Processes of as-Cast and Aged Specimens of High-Vacuum Die-Cast Mg-9Al-1Zn Alloy: Jie Song1; Shou-Mei Xiong1; 1Tsinghua University

11:10 AMStructure-Property Relationships for Die-Cast Magnesium Alloys: Jeffrey Wood1; J.P. Weiler1; J. Jekl2; R. Berkmortel2; 1University of Western Ontario; 2Meridian Technologies, Inc.

11:30 AMGrain Refinement of Mg-Al Alloys by Carbon Inoculation: Yuanding Huang1; Bin Liu1; Okechukwu Anopuo1; Norbert Hort1; Karl Kainer1; 1GKSS Research Center

11:50 AMA Systematic Study of the Grain Refinement of Magnesium by Zirconium: Partha Saha1; Katie Lolies1; Srinath Viswanathan1; Arun Gokhale2; Robert Batson1; 1The University of Alabama; 2Georgia Institute of Technology

12:10 PMGrain Refinement of AZ91 Alloy by Addition of Ceramic Particles: Dmitry Shepelev1; Julia Klemf1; Menachem Bamberger1; Alexander Katsman1; 1Technion

Magnesium Technology 2010: Deformation MechanismsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Sean Agnew, University of Virginia; Louis Hector Jr, GM R&D Center

8:30 AMThe Evolution of In-Grain Misorientation Axes (IGMA) during Deformation of Wrought Magnesium Alloy AZ31: Young Chun1; Chris Davies1; 1Monash University

8:50 AMInfluence of Deformation Processing on the Tensile/Compressive Asymmetry in Wrought Mg-3Al-Zn Alloy: Ran Liu1; De Liang Yin1; Jing Tao Wang1; 1Nanjing University of Science and Technology

9:10 AMImportance of Crystallographic Texture of AZ31B Importance of Crystallographic Texture of AZ31B on Flow Stress Anisotropy and Tension-Compression Asymmetry: Majid Al-Maharbi1; David Floey1; Ibrahim Karaman1; Irene Beyerlein2; Ted Hartwig1; Laszlo Kecskes3; Suveen mathaudhu3; 1Texas A&M University; 2Los Alamos National Laboratory; 3U.S. Army Research Laboratory

9:30 AMMechanical Behavior of AZ31 Due to Texture and Microstructure: David Foley1; Majid Al-Maharbi1; K.T. Hartwig1; Ibrahim Karaman1; Laszlo Kecskes2; Suveen Mathaudhu2; 1Texas A&M University; 2US Army Research Lab

9:50 AMMechanical Anisotropy in Extruded Mg Alloy AM30: Brian Gerard1; Adam Niechajowicz2; Zbigniew Gronostajski2; Wojciech Misiolek1; 1Lehigh University; 2Wroclaw University of Technology


100

Technical Program

Wed

. AM

10:10 AMImplementation of the Anisotropy of Plastic Flow in Inverse Parameter Calculations of the Deformation Behavior of AZ31 Magnesium Alloy: Timo Ebeling1; Christian Hartig1; Rüdiger Bormann1; 1Hamburg University of Technology

10:30 AMTensile Mechanical Properties and the Ductile-To-Brittle Transition Behavior of the Mg-Li-Al-Zn Alloy: Chung-Wei Yang1; Truan-Sheng Lui1; Li-Hui Chen1; 1National Cheng Kung University

10:50 AMThe Influence of Sn and Pb Addition on the Tensile Properties of Mg Alloys: Wei Gao1; Hongmei Liu1; 1The University of Auckland

11:10 AMRoom Temperature Tensile Anisotropy of Extruded Magnesium Plates: Paul Krajewski1; Adi Ben-Artzy2; Raj Mishra1; 1General Motors; 2Rotem Industries

11:30 AMMechanical Properties and Microstructural Analysis of AXJ530 Magnesium Alloy Reinforced with Alumina Fibers: Bin Hu1; Liming Peng1; Bob Powell2; Anil Sachdev2; Xiaoqin Zeng1; 1Shanghai Jiao Tong University; 2General Motors Corporation

11:50 AMVery High Strain Rate Deformation of AZ31b Mg Alloys Using Split Hopkinson Pressure Bar: Mehdi Sanjari1; Amir Farzadfar1; Steve Yue1; Elhachmi Essadiqi2; 1McGill; 2CANMET-MTL

12:10 PMObservation of Non-Basal Slip in Ductile Deformed MgY Alloys: Igor Schestakow1; Stefanie Sandlöbes1; Sangbong Yi2; Stefan Zaefferer1; 1Max-Planck-Institut für Eisenforschung GmbH; 2GKSS-Forschungszentrum - Magnesium Innovation Center (MagIC)

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: SOFC IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: Zhenguo “Gary” Yang, Pacific Northwest National Laboratory; Jeffrey Fergus, Auburn University

8:30 AM InvitedAdvanced Novel Interconnect Coatings for Hermetic Sealing and Mitigation of Cr Volatility in Planar SOFC Stacks: Jung Pyung Choi1; Scott Weil1; Matt Chou1; Jeff Stevenson1; Gary Yang1; Gordon Xia1; 1Pacific Northwest National Laboratory

9:10 AM InvitedCoating of Dense Oxide Layer on the Fe-Cr Alloys for Interconnects of Solid Oxide Fuel Cells: Teruhisa Horita1; Haruo Kishimoto1; Katsuhiko Yamaji1; Manuel Brito1; Harumi Yokokawa1; 1AIST

9:50 AMCharacterization of Mn-Co Electrodeposition for SOFC Interconnect Applications by QCM: Junwei Wu1; Ayyakkannu Manivannan2; Randall Gemmen2; Xingbo Liu1; 1West Virginia University; 2National Energy Technology Laboratory

10:10 AM Break

10:20 AM InvitedInteractions between (Mn,Co)3O4 SOFC Interconnect Coating Materials and Chromia: Jeffrey Fergus1; Kangli Wang1; Yingjia Liu1; 1Auburn University

11:00 AMRecent Progress in Cathode/Interconnect Contact Materials R&D for SOFCs at PNNL: Gordon Xia1; Zigui Lu1; Josh Templeton1; Gary Yang1; Jeffry Stevenson1; 1Pacific Northwest National Laboratory

11:20 AMThe Evolution of Oxide Ridges during Scaling of Fe-22wt%Cr Alloys: Jingxi Zhu1; Laura Fernandez Diaz2; Gordon Holcomb2; Paul Jablonski2; Christopher Cowen2; David Laughlin1; Dave Alman2; Sridhar Seetharaman2; 1Carnegie Mellon University; 2National Energy Technology Laboratory

11:40 AMThe Possibility for IT SOFC Interconnector Material Used to Stainless Steel: Kee-Do Woo1; MinSeok Moon1; Eui-pyo Kwon1; Myeong-han Yoo1; Sang-hyuk Kim1; Duck-soo Kang1; 1Chonbuk National University

Modeling of Multi-Scale Phenomena for Batteries: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Adrian Sabau, Oak Ridge National Laboratory; Perla Balbuena, Texas A&M University, Artie McFerrin Department of Chemical Engineering; Venkat Subramanian, Tennessee Tech University, Department of Chemical Engineering


Session Chairs: Adrian Sabau, Oak Ridge National Laboratory; Venkat Subramanian, Washington University


8:35 AMPredicting of Surface Morphology Defects in Electrochemical Storage Devices: Adrian Sabau1; Nancy Dudney1; 1Oak Ridge National Laboratory

9:05 AMContinuum and Multi-scale Modeling of Performance Curves and Capacity Fade in Lithium-Ion Batteries: Ravi Methekar1; Venkatsailanathan Ramadesign1; Venkat Subramanian1; Kejia Chen2; Richard Braatz2; 1Tennessee Tech University, Department of Chemical Engineering; 2University of Illinois at Urbana-Champaign

9:35 AMDiffusion and Phase Transformations in Lithium Ion Battery Anodes from First Principles: Jishnu Bhattacharya1; Anton Van der Ven1; 1University of Michigan

10:05 AM InvitedThe Solid-Electrolyte-Interface Processes in Lithium-Ion Battery by Atomistic Simulations: Ken Tasaki1; 1Mitsubishi Chemical USA


101

Technical Program

Wed

. AM

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Physics of Defects, Dislocation Nucleation and Fracture ISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Sulin Zhang, The Pennsylvania State University; Sergey Medyanik, Washington State University

8:30 AM InvitedNanoscale Modeling of Fracture: W. Curtin1; S. Chakravarthy1; 1Brown University

9:00 AMUnderstanding Scaling Relations in Fracture and Mechanical Deformation of Single Crystal and Polycrystalline Silicon by Performing Atomistic Simulations at Mesoscale: Hansung Kim1; Vikas Tomar1; 1University of Notre Dame

9:20 AMEffects of Geometry, Mode Mixity, and Temperature on Dislocation Nucleation in Strained Electronics: Tianlei Li1; Jinhaeng Lee1; Yanfei Gao1; 1University of Tennessee

9:40 AMAnalysis of Genealized Stacking Fault Energy for FCC Fe-Mn Alloys Using Molecular Dynamics Simulation: Minho Jo1; Y. M. Koo1; S. K. Kwon1; 1Graduate Institute of Ferrous Technology, Pohang University of Science and Technology

10:00 AM Break

10:20 AM InvitedSize Effect on the Fracture Behaviors of Si Nanowires in Tension: Wei Cai1; Keonwook Kang1; 1Stanford University

10:50 AMLattice Misorientation Patterns and Strain Gradient Effects in Single Crystals under Spherical Indentation: Yanfei Gao1; B. Larson2; G. Pharr1; 1University of Tennessee; 2Oak Ridge National Laboratory

11:10 AM InvitedNanoscale Fracture in Graphene: Sulin Zhang1; 1The Pennsylvania State University

Neutron and X-Ray Studies of Advanced Materials III: Strain and Dislocation Gradients from Microdiffraction IISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Dean Haeffner, Argonne National Laboratory; Klaus-Dieter Liss, Australian Nuclear Science and Technology Organisation

8:30 AM KeynoteStrain and Dislocation Density in Barium Titanate by Synchrotron and Laboratory X-Ray Diffraction: Davor Balzar1; 1University of Denver

9:00 AM InvitedUsing X-Ray Microbeams to Measure Complete Strain Tensors from Dislocation Cell Structures in Deformed Cu: Michael Kassner1; Peter Geantil1; Lyle Levine2; Bennett Larson3; Jon Tischler3; 1University of Southern California; 2National Institute of Standards and Technology; 3Oak Ridge National Laboratory

9:20 AMMicrostructure, Mechanical Behavior and Deformation Mechanisms of Nanocrystalline Ni-50wt%Fe: Steven Van Petegem1; Julien Zimmermann1; Stefan Brandstetter2; Xavier Sauvage3; Marc Legros2; Bernd Schmitt1; Helena Van Swygenhoven1; 1Paul Scherrer Institut; 2CEMES-CNRS; 3University of Rouen

9:35 AM InvitedX-Ray Diffraction Microscopy Studies of Microstructure Responses: Christopher Hefferan1; Shui Fai Li1; Ulrich Lienert2; Anthony Rollett1; Greg Rohrer1; Robert Suter1; 1Carnegie Mellon University; 2Argonne National Laboratory

9:55 AMThermo-Mechanical Processing in a Synchrotron Beam: Klaus-Dieter Liss1; 1Australian Nuclear Science and Technology Organisation

10:10 AM InvitedCorrelation of X-Ray Diffraction Examination of Recovery in Cold-Rolled Aluminum with Dynamic Dislocation-Defect Analysis: Shig Saimoto1; Joyce Cooley1; 1Queen’s University

10:30 AM Break

10:40 AM InvitedFSP-Induced Plastic Deformation and Elastic Strains in Individual Dendrites of the Ni-Based Superalloy from X-Ray Microdiffraction: Oleg Barabash1; Rozaliya Barabash1; Gene Ice1; Zhili Feng1; 1Oak Ridge National Laboratory

11:00 AM InvitedSynchrotron Microdiffraction Analysis of the Microstructure of Cryogenically Treated High Performance Tool Steels Prior to and after Tempering: Ning Xu1; Andrea Gerson1; Giuseppe Cavallaro1; 1ACeSSS (Applied Centre for Structural and Synchrotron Studies)

11:20 AM InvitedMaterials Studies Using High-Resolution Laue X-Ray Microdiffraction: John Budai1; Wenjun Liu2; Jon Tischler1; 1Oak Ridge National Laboratory; 2Argonne National Lab


102

Technical Program

Wed

. AM

11:40 AMWear Properties of Single Phase Ti Alloys and Surface Damage Characterization by X-Ray Diffraction: Eri Miura-Fujiwara1; Hisashi Sato1; Gene Ice2; Yoshimi Watanabe1; 1Nagoya Institute of Technology; 2Oak Ridge National Laboratory

11:55 AM InvitedPolychromatic X-Ray Microdiffraction (PXM) Studies of Stress Corrosion Cracking (SCC) in Alloy 600: Marina Suominen Fuller1; Jing Chao1; N. Stewart McIntyre1; Sridhar Ramamurthy1; Leo Lau1; Roger Newman2; Anatolie Carcea2; Renfei Feng3; 1University of Western Ontario; 2University of Toronto; 3Canadian Light Source Inc.

12:15 PMCrystal Distortion Gradient in the Vicinity of a Grain-Boundary in Plastically Deformed Bicrystals: Gael Daveau1; Benoit Devincre1; Thierry Hoc2; Odile Robach3; 1LEM-CNRS/ONERA; 2MSSMat-Centrale Paris; 3NRS/CEA-Grenoble

12:25 PMGrain Rotation and Texture Evolution in Cubic Polycrystals Determined by Synchrotron X-Ray Diffraction: Kun Yan1; Klaus-Dieter Liss1; Rian Dippenaar2; 1The Bragg Institute; 2University of Wollongong

12:35 PM2010 JIM International Scholar Award Winner: Development of Coherent X-Ray Diffraction Microscopy and Its Application in Materials Science: Yukio Takahashi1; Y. Nishino2; T. Ishikawa2; K. Yamauchi1; E. Matsubara3; 1Osaka University; 2RIKEN SPring-8 Center; 3Kyoto University

Nuclear Energy: Processes and Policies: Material BehaviorSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Nuclear Materials Committee, TMS: Public and Governmental Affairs CommitteeProgram Organizers: Brajendra Mishra, Colorado School of Mines; Aladar Csontos, U.S. Nuclear Regulatory Commission; Stuart Maloy, Los Alamos National Laboratory; Jeremy Busby, Oak Ridge National Laboratory; Sue Lesica, U.S. Department of Energy’s Office of Nuclear Energy


Session Chairs: Stuart Maloy, Los Alamos National Laboratory; Jeremy Busby, Oak Ridge National Laboratory

8:30 AM KeynoteFuture of Nuclear Energy Research and Development: Sue Lesica1; 1U.S. Department of Energy’s Office of Nuclear Energy Abstract not available.

9:05 AMA Study of the Initial Effects of Irradiation on Nanocluster Stability on ODS Steel: Alicia Certain1; Jim Bentley2; Michael Miller2; Jeremy Busby2; Robert Ulfig3; Todd Allen1; Kevin Field1; 1University of Wisconsin-Madison; 2Oak Ridge National Laboratory; 3Imago Scientific Instruments

9:30 AMFracture and Impact Properties of HT-9 Steel Irradiated to High Dose in FFTF: Thak Sang Byun1; Stuart Maloy2; 1Oak Ridge National Laboratory; 2Los Alamos National Laboratory

9:55 AMIn-Plane Anisotropy in Microstructure and Mechanical Behavior of Alloy 617 Following High Temperature Aging: Kun Mo1; Gianfranco Lovicu2; Hsiao-ming Tung1; Xiang Chen1; James Stubbins1; 1University of Illinois; 2University of Pisa

10:20 AM Break

10:35 AMMaRIE; A Proposed Materials Facility at Los Alamos National Laboratory: Mark Bourke1; 1Los Alamos National Laboratory

11:00 AMMicrostructural Evolution in Friction Stir Welded MA956 and 14YWT: Michael West1; Bharat K. Jasthi1; William J. Arbegast1; David T. Hoelzer1; 1South Dakota School of Mines and Technology

11:25 AMThe Behavior of Precipitate Strengthened Steels under Irradiation: Peter Hosemann1; Erich Stergar2; Stuart Maloy1; Harald Leitner2; Andrew Nelson1; 1LANL; 2University of Leoben

11:50 AMIn Situ Synchrotron Study and Computer Modeling of Advanced Nuclear Structural Alloys: Meimei Li1; Jonathan Almer1; Ken Natesan1; David Rink1; 1ANL

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Alloy DevelopmentSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo , Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu , Intel Corporation


Session Chairs: Iver Anderson, Iowa State University; Jenn-Ming Song, National Dong Hwa University

8:30 AM InvitedShock Resistant and Thermally Reliable Low Ag SAC Solders Doped with Mn or Ce: Ning-Cheng Lee1; Weiping Liu1; Adriana Porras2; Min Ding2; Anthony Gallagher3; Austin Huang4; Scott Chen4; Jeffrey ChangBing Lee5; 1Indium Corporation; 2Freescale Semiconductor; 3Motorola Inc; 4Advanced Semiconductor Engineering Group; 5IST-Integrated Service Technology Inc

8:55 AMEffects of Co Addition upon Sn-8.8Zn/Cu and Sn-57Bi/Cu Interfacial Reactions: Yu-chih Huang1; Sinn-wen Chen1; 1National Tsing Hua University

9:10 AMHigh-Temperature Lead-Free Solder Alternatives: Possibilities and Properties: Vivek Chidambaram1; John Hald1; Jesper Hattel1; 1Technical University of Denmark

9:25 AMImprovement of Wettability and Thermal Properties at Bi Based Alloys: Minoru Ueshima1; 1Senju Metal Industry

9:40 AMLiquid Phase Sintered Solders as Thermal Interface Materials for Conventional and High Temperature Electronic Applications: Jia Liu1; Paul Rottmann1; Shouvik Dutta1; Chelliah Nagaraj2; Praveen Kumar1; Mukul Renavikar3; Rishi Raj2; Indranath Dutta1; 1Washington State University; 2University of Colorado; 3Intel Corp.

9:55 AMDevelopment of Sn-Ag-Cu-X Alloys for Electronic Assembly: Adam Boesenberg1; Iver Anderson2; Joel Harringa2; 1Iowa State University; 2Ames Laboratory of US DOE

10:10 AM Break

103

Technical Program

Wed

. AM

10:25 AMOn the Mechanism of Retarding Cu3Sn Growth by Ni Addition: Yi-Wun Wang1; C. Robert Kao1; 1National Taiwan University

10:40 AMOn the Merits of Transient Liquid Phase Bonding as a Substitute for Soldering with High-Pb Alloys: Alexandre Kodentsov1; 1Eindhoven University of Technology

10:55 AMThermal, Mechanical Stability, and Wetting Behavior of Novel Cerium (Ce)-Containing Pb-Free Solders on Cu and Ni-Au Metallization: Huxiao Xie1; Ling Jiang1; Mukul Renavikar2; Nik Chawla1; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering; 2Intel/ATTD

11:10 AMPolymers Investigation for 3D IC Stacking Technology: Cheng-Ta Ko1; Wei-Chung Lo1; Kuan-Neng Chen2; Huan-Chun Fu1; Zhi-Cheng Hsiao1; Yu-Hua Chen1; 1Industrial Technology Research Institute; 2National Chiao Tung University

11:25 AMModeling of Reflow Temperatures and Wettability in Lead-Free Solder Alloys Using Hybrid Evolutionary Algorithms: Chedtha Puncreobutr1; Gobboon Lohthongkum2; Prabhas Chongstitvattana1; Boonrat Lohwongwatana2; 1Department of Computer Engineering, Faculty of Engineering, Chulalongkorn University; 2Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University

11:40 AMEffects of Processing and Amount of Co Addition on Shear Strength and Microstructural Development in Sn-3.0Ag-0.5Cu Solder Joint: Limin Ma1; Feng Tai1; Guangchen Xu1; Fu Guo1; 1Beijing University of Technology

Polymer Nanocomposites: Carbon Fibers and Carbon NanotubesSponsored by: The Minerals, Metals and Materials SocietyProgram Organizer: John Zhanhu Guo, Lamar University


Session Chairs: John Zhanhu Guo, Lamar University; Carla Leer, Applied Sciences, Inc


8:35 AM KeynoteAn Assessment of the Science and Technology of Carbon Nanotube Composites: Tsu-Wei Chou1; Erik Thostenson1; Limin Gao1; 1University of Delaware

9:15 AMHierarchical Nanocomposites Based on Controlled CNT Arrays: Wei Chen1; Steven Nutt1; 1University of Southern California

9:35 AM InvitedStudy on Damping Properties of Polyetherimide/Graphite Nano-Platelet Composites: Anthony Perugini1; Bin Li1; Weihong Zhong1; 1Washington state university

9:55 AMMechanomutable Carbon Nanotube Arrays: Markus Buehler1; Steven Cranford1; 1Massachusetts Institute of Technology

10:15 AM Break

10:45 AM InvitedPlasma Coating and Magnetic Alignment of Carbon Nanotubes in Polymer Composites: Donglu Shi1; Hoon Sung Cho1; Christopher Huth1; Jie Lian2; 1University of Cincinnati; 2Rensselaer Polytechnic Institute

11:15 AM InvitedInterfacial Interaction among Carbon Nanofibers Reinforced Epoxy Nanocomposites: Jiahua Zhu1; Suying Wei1; John Zhanhu Guo1; 1Lamar University

11:45 AMLocalized Characterization of Carbon Nanotubes and Carbon Nanotube Reinforced Nanocomposites Using Novel Micromechanical Devices: Yogi Ganesan1; Yang Lu1; Cheng Peng1; Hao Lu1; Roberto Ballarini1; Boris Yakobson1; Jun Lou1; 1Rice University

12:05 PMQuantification of Carbon Nanotube Distribution and Property Correlation in Nanocomposites: Srinivasa Bakshi1; Ruben Batista1; Arvind Agarwal1; 1Florida International University

Processing Materials for Properties: Functional Materials ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Sreeramamurthy Ankem, University of Maryland; Vikas Sinha, UES, Inc.

8:30 AM KeynoteMelting Behavior of Solid Particles during High Temperature Bath Processing: Florian Kongoli1; Ian McBow1; E. O’Brien1; S. Llubani1; 1FLOGEN Technologies Inc

9:00 AMDirect Reversal Imprint Lithography of Indium-Tin Oxide (ITO) Nanoparticles for Improvement of Light Extraction Efficiency of GaN Based LED Devices: Ki-Yeon Yang1; Sang-Chul Oh1; Kyeong-Jae Byeon1; Heon Lee1; 1Korea University

9:20 AMFabrication of Photonic Crystal Patterns on GaN-Based Light-Emitting Diodes to Improve Photon Extraction Efficiency: Kyeong-Jae Byeon1; Eun-Ju Hong1; Hyoungwon Park1; Kyung-Min Yoon1; Joong Yeon Cho1; Heon Lee1; 1Korea University

9:40 AMIndium-Gallium-Zinc-Oxide Based Thin-Film-Transistor for Display Devices.: Sonachand Adhikari1; Rajeev Gupta1; Deepak1; Ashish Garg1; 1Indian Institute of Technology Kanpur

10:00 AMProduction and Characterization of ASTM F75 Balls Produced by the Uniform-Droplet Spray Process: Sudesna Roy1; Teiichi Ando1; 1Northeastern University

10:20 AM Break

10:30 AMPreparation and Characterization of Microfibrous Entrapped Solid Adsorbents for Desulfurization of Liquid Fuels: David Cocke1; Mohammad Islam1; Jewel Gomes1; Eric Peterson2; Morgan Reed1; Doanh Tran1; Hylton McWhinney3; 1Lamar University; 2Fluor; 3Prairie View A&M University

10:50 AMEnergy Efficient Sintering of Al/Cu Nanocomposites Using Different Microwave Power Levels: Shashank Nawathe1; W.L.E. Wong2; M. Gupta2; 1University of California, Berkeley; 2National University of Singapore


104

Technical Program

Wed

. AM

11:10 AMMicrostructural Characterization of Shape Memory Alloys for Ferromagnetic Applications: F. Khalid1; 1GIK Institute of Engineering Science and Technology

11:30 AMAnisotropic Crystallization of Uniaxially Pressed Mixed Rare Earth-Iron-Boron Alloys: Nathaniel Oster1; Iver Anderson2; Wei Tang2; Yaqiao Wu2; Kevin Dennis2; Matthew Kramer2; R. McCallum2; 1Iowa State University; 2Ames Lab

11:50 AMThe Effect of Sputtering Parameters on the Phase Formation of Sputtered Tantalum: Anahita Navid1; Andrea Hodge1; 1University of Southern California

12:10 PMTiO2 Aggregates for Dye-Sensitized Solar Cells Application: Qifeng Zhang1; Xiaoyuan Zhou1; Christopher Dandeneau1; Kwangsuk Park1; Supan Yodyingyong1; Guozhong Cao1; 1University of Washington

Recycling General Sessions: MetalsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies CommitteeProgram Organizer: Joseph Pomykala, Argonne National Laboratory


Session Chair: Joseph Pomykala, Argonne National Laboratory

8:30 AMPreliminary Research on Preparation Al-Si-Ti Alloy with Aluminum Ash as Electrolysis Materials: Liu Qingsheng1; Xue Jilai2; Jing Qingxiu1; 1Jiangxi University of Science and Technology; 2University of Science and Technology Beijing

8:50 AMEffective Utilization of Wastes Generated in the Integrated Aluminium Production - A Review: Narasimharaghavan Krishnaswamy1; Nand Kumar Kshatriya1; Bibhu Mishra1; Ramaswamy Jagannathan1; Durba Khasyap1; 1Bharat Aluminium Co. Ltd., (A Unit of Vedanta Resources Plc.,), BALCO Nagar, Korba

9:10 AMStabilization of Chromium-Based Slags with MgO: Hugo Cabrera-Real1; Antonio Romero-Serrano1; Beatriz Zeifert1; Manuel Hallen-Lopez1; 1IPN

9:30 AMPreparation of Potassium Ferrate by Hypochlorite Oxidation Method: Guomin Jiang1; Liyuan Chai1; Yunyan Wang1; Yude Shu1; Min Yue1; 1Central South University

9:50 AM Break

10:00 AMIsotherm and Kinetics Studies of the Biosorption of Cobalt from Aqueous Solutions by Waste Materials: Chen Yunnen1; Fan Jingbiao1; 1Jiangxi University of Science and Technology

10:20 AMNovel Technology for Wastewater Treatment by Biologics in Hydrometallurgical Processes of Lead-Zinc: Qingwei Wang1; Liyuan Chai1; Yunyan Wang1; Qingzhu Li1; Zhihui Yang1; 1Central South University

10:40 AMStudy on the In-Situ Remediation of Cr-Contaminated Soil by Indigenous Microorganism: Shunhong Huang1; 1Hunan Research Institute of Nonferrous Metals, Changsha

11:00 AMThe Optimum Condition for Cr(VI) Bioremediation in Soils Contaminated by Chromate Ore Processing Residue: Changqing Su1; Yonghua Zhu1; Bing Wang1; Hangbin Li1; Yingping Liao1; 1Central South University

11:20 AMThermodynamic Equilibrium of Hydroxyl Complex Ions in Mn2+-H2O System: Fei Pei1; Yunyan Wang1; Liyuan Chai1; 1Central South University

Sustainable Materials Processing and Production: Sustainable Technologies ISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Wednesday AM Room: 2BFebruary 17, 2010 Location: Washington State Convention Center

Session Chairs: Randolph Kirchain, Massachusetts Institute of Technology; Gabrielle Gaustad, Rochester Institute of Technology


8:35 AM KeynoteIT and Sustainability: The Power to Transform: Joe Johnson1; 1Cisco Systems, Inc.

9:00 AM Invited‘Slag Valorisation’, as an Example of High Temperature Industrial Ecology: Daneel Geysen1; Peter Jones1; Arnout Sander2; Yiannis Pontikes1; Özlem Cizer3; Tom Van Gerven4; Marc Craps5; Johan Eyckmans5; Bart Blanpain1; 1MTM KULeuven; 2InsPyro; 3BWK, KULeuven; 4CIT KULeuven; 5HUB

9:25 AMSustainability Study in Selective Laser Sintering – An Energy Perspective: Rameshwar Sreenivasan1; David Bourell1; 1The University of Texas at Austin

9:50 AM Invited2010 Vittorio de Nora Award Winner: Designing Crushing and Grinding Circuits for Improved Energy Efficiency: Zeljka Pokrajcic1; 1WorleyParsons Services Pty Ltd – Minerals and Metals

10:15 AM Break

10:30 AMEnergy and Environmental Challenges in Aluminium Industry - A Review: Narasimharaghavan Krishnaswamy1; Bibhu Mishra1; Ramaswamy Jagannathan1; 1Bharat Aluminium Co. Ltd., (A Unit of Vedanta Resources Plc.), BALCO Nagar, Korba

10:55 AMTowards Sustainable Material Usage: Investigating Limits to Secondary Aluminum Sinks: Gabrielle Gaustad1; Elsa Olivetti2; Randolph Kirchain2; 1Rochester Institute of Technology; 2MIT

11:20 AMUse of Eco Friendly Alternate Refining Flux in Aluminium Cast House - A Step Towards Sustainable Development: Narasimharaghavan Krishnaswamy1; Mousumi Kar1; T. Prabu1; Charulata Mathur1; Gautam Dey1; 1Bharat Aluminium Co. Ltd., (A Unit of Vedanta Resources Plc.,), BALCO Nagar, Korba

11:45 AMSustainable Electrolysis for Electrowinning and Electrorefining of Metals: Geir Martin Haarberg1; 1Norwegian University of Science and Technology


105

Technical Program

Wed

. AM

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Grain Boundaries and Interface Structure and Properties: Joint Session with Solid-State InterfacesSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, Univ of Groningen


Session Chairs: Vaclav Paidar, Institute of Physics AS CR vvi; Alan Needleman, University of North Texas; Antonia Antoniou, Georgia Institute of Technology

8:30 AM InvitedThe Simulation of Grain Boundaries in Single Component and Multi-Component Systems: Adrian Sutton1; Alvin Chua1; Nicole Benedek1; Lin Chen1; Manuel Kurdian1; Sebastian von Alfthan2; Peter Haynes1; Kimmo Kaski2; Mike Finnis1; 1Imperial College London; 2Helsinki University of Technology

8:55 AM InvitedStructure and Properties of Metal/Ceramic Interfaces in Materials Systems: Manfred Ruehle1; 1MPI for Metals Research

9:20 AM InvitedElastic and Anelastic Interface Properties in Martensitic Transformations: Robert Pond1; John Hirth2; 1University of Exeter; 2Private Individual

9:45 AMResponse of a Σ 11 Asymmetric Tilt Grain Boundary in Copper to an Applied Shear Stress at Finite Temperatures: Saryu Fensin1; Mark Asta1; Richard Hoagland2; 1University of California, Davis; 2Los Alamos National Laboratory

10:10 AM Break

10:30 AM InvitedCrystal Symmetry and Burgers-Vector Content of Grain Boundaries: J. Cahn1; Y. Mishin2; 1National Institute of Standards and Technology; 2George Mason University

10:55 AM InvitedTemperature Dependence of Grain Boundary Properties: Stephen Foiles1; Elizabeth Holm1; David Olmsted2; 1Sandia National Laboratories; 2Northeastern University

11:20 AMHeterophase Segregation on an Atomic Scale: Atom-Probe Tomographic Experiments and First-Principles Simulation: David Seidman1; 1Norhwestern University

11:35 AMFull Delineation of Harrison’s Diffusion Kinetics Regimes for Grain Boundary Diffusion: A Monte Carlo Study: Graeme Murch1; Irina Belova1; Thomas Fiedler1; 1The University of Newcastle

Thermo-Mechanical Response of Molecular Solids: Multi-Resolution Theory, Simulations, and Experiments: Polymers and CompositesSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials DivisionProgram Organizers: Alejandro Strachan, Purdue University; Thomas Sewell, University of Missouri-Columbia; Rodolfo Pinal, Purdue University; Chunyu Li, Purdue University




8:35 AM InvitedCarbon Nanotube Adhesion: Myths and Magic: R. Pipes1; 1Purdue University

9:05 AMCharacterization of Material Response to Indentation Process in Composite Materials: Harsha Yejju1; Alvaro Mendoza1; Marisol Koslowski1; 1Purdue University

9:25 AMMicrostructure Sensitive Design Framework for Elastic-Plastic Multi-Phase Materials: Jacqueline Milhans1; Dongsheng Li1; Hamid Garmestani1; 1Georgia Institute of Technology

9:45 AMRole Loading Conditions on the Mechanical Response of PMMA from Molecular Dynamics: Eugenio Jaramillo1; Alejandro Strachan2; 1Texas A&M International University; 2Purdue University

10:05 AM InvitedMultiscale Modeling of Polymer Modified Colloidal Suspensions: Dmitry Bedrov1; 1University of Utah

10:35 AM Break

10:50 AM InvitedImplications of Dynamic Heterogeneity for Mechanical Behavior of Glassy Polymers: Grigori Medvedev1; James Caruthers1; 1Purdue University

11:20 AM InvitedMechanical Properties of Block Copolymer Self-Assemblies: Kim Rasmussen1; 1Los Alamos National Laboratory

11:50 AMMolecular Dynamics Simulations of Crosslinked EPON862/DETDA Polymers: Chunyu Li1; Alejandro Strachan1; 1Purdue University

12:10 PMRole of Interface Thermal Boundary Resistance, Straining and Morphology in Thermal Conductivity of a Set of Si-Ge Superlattices and Biomimetic Si-Ge Nanocomposites: Vikas Samvedi1; Vikas Tomar2; 1University of Notre Dame; 2Purdue University


106

Technical Program

Wed

. AM

Three-Dimensional Materials Science VI: Novel Tools for 3D Data Acquisition and Analysis - Part ISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: Alexis Lewis, U S Naval Research Laboratory; John Budai, Oak Ridge National Laboratory

8:30 AM Invited3-D Materials Science using Polychromatic Synchrotron X-Ray Microdiffraction: John Budai1; Jon Tischler1; Wenjun Liu2; Anthony Rollett3; 1Oak Ridge National Laboratory; 2Argonne National Lab; 3Carnegie Mellon University

9:00 AMApplications of a Local-Electrode Atom-Probe (LEAP) 4000X Si for Obtaining Three-Dimensional Chemical Information with Subnanoscale Resolution: David Seidman1; 1Norhwestern University

9:20 AMPartitioning Behavior of Al and Si in FINEMET Nanocrystalline Soft Magnetic Alloys, as Studied by Atom-Probe Tomography: Keith Knipling1; Maria Daniil1; Matthew Willard1; 1Naval Research Laboratory

9:40 AMRecent Advances in Atom Probe Tomography for 3D Microstructural Characterization: Michael Miller1; 1ORNL

10:00 AMAtom Probe Studies on the Segregation of C and N in Fe-17%Mn Steels: Jae-Bok Seol1; Soon-Ki Lee2; Chan-gyung Park3; 1POSTECH; 2POSCO; 3POSTECH, NCNT

10:20 AM Break

10:50 AMCorrelative Microscopy: 3-D Multiscale Imaging and Modelling: Farid Tariq1; Ralph Haswell2; Peter Lee1; David McComb1; 1Imperial College London; 2Shell Global Solutions International B.V.

11:10 AMMulti-Scale Characterization of a Ni-Base Single Crystal Turbine Blade: Michael Groeber1; Dennis Dimiduk1; Chris Woodward1; Michael Uchic1; Rebecca Fahringer1; 1AFRL

11:30 AMMulti-Length Scale Three Dimensional Characterization of Tantalum Carbide Microstructures: Robert Morris1; Gregory Thompson1; 1The University of Alabama

11:50 AMA Crystal-Plasticity FEM Study on Effects of Simplified Grain Representation and Mesh Types on Mesoscopic Deformation Heterogeneities: Yoon Suk Choi1; Michael Groeber2; Dennis Dimiduk2; Christopher Woodward2; Michael Uchic2; Triplicane Parthasarathy1; 1UES, Inc.; 2Air Force Research Laboratory

Ultrafine Grained Materials – Sixth International Symposium: Young ScientistSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Terry Langdon, University of Southern Californis; Suveen Mathaudhu, U.S. Army Research Laboratory; Yuntian Zhu, North Carolina State University; Terry Lowe, Manhatten Scientifics, Inc.

8:30 AMGrain Growth Kinetics for an Aluminum Based Nanocmposite: Leyla Hashemi-Sadraei1; Rustin Vogt1; Zhihui Zhang1; Ying Li1; S. Ebrahim Mousavi1; Enrique Lavernia1; Julie Schoenung1; 1University of California, Davis

8:45 AMInfluence of High-Pressure Torsion on Hardness of a Supersaturated Al-7136 Alloy: Zhi Duan1; Xiaozhou Liao2; Megumi Kawasaki1; Roberto Figueiredo1; Terence Langdon1; 1University of Southern California; 2University of Sydney

9:00 AMMicrostructural Characterization of Ti-6Al-4V Metal Chips by Focused Ion Beam and Transmission Electron Microscopy: Lei Dong1; Judy Schneider1; Jane Howe2; 1Mississippi State University; 2Oak Ridge National Laboratory

9:15 AMUFG Aluminum Alloy Tested in Dynamic High Temperature Compression: Emily Huskins1; K. Ramesh1; 1Johns Hopkins University

9:30 AMWork-Hardening Stages of AA1070 and AA6060 after Severe Plastic Deformation: Matthias Hockauf1; Lothar W. Meyer1; Ines Schneider2; 1Chemnitz University of Technology; 2Wehrwissenschaftliches Institut für Werk- und Betriebsstoffe

9:45 AMUnusual Macro-Structure and Hardness Patterns in Duplex Stainless Steel Processed by High-Pressure Torsion: Yang Cao1; Yanbo Wang1; Saleh Alhajeri2; Xiaozhou Liao1; Simon Ringer1; Terence Langdon3; Yuntian Zhu4; 1The University of Sydney; 2University of Southampton; 3University of Southern California; 4North Carolina State University

10:00 AMImprovement of Strength and Ductility for an AA6065 Aluminium Alloy Achieved by a Combination of Equal-Channel Angular Pressing and Ageing Treatment: Lothar W. Meyer1; Kristin Hockauf1; Matthias Hockauf1; Thorsten Halle1; 1Chemnitz University of Technology

10:15 AM Break

10:30 AMAging of an Al-Si-Mg Alloy Processed by ECAP: The Effect of the Initial Microstructure: Edgar Garcia-Sanchez1; Edgar Ortiz-Cuellar1; Edgar Lopez-Chipres2; Martha P. Guerrero-Mata1; Rafael Colás1; 1FIME-UANL; 2Facultad de Quimica, Univerisdad Juarez del Edo. deDurango

10:45 AMGrain Size Effect on the Deformation Mechanisms and Mechanical Properties of Gum Metals: Yanbo Wang1; Xiaozhou Liao1; Yonghao Zhao2; Enrique Lavernia2; Ruslan Valiev3; 1The University of Sydney; 2University of California, Davis,; 3Ufa State Aviation Technical University

107

Technical Program

Wed

. PM

11:00 AMEqual Channel Angular Pressing of Pure Gold: Anumalasetty Nagasekhar1; T. Rajkumar2; D. Stephan2; Y. Tick-Hon3; 1The University of Queensland; 2Heraeus Materials Singapore Pte Ltd; 3University of Toronto

11:15 AMSynthesis of Bulk Nanostructured Cu via Spark Plasma Sintering and High Pressure Torsion of Cryomilled Powders: Haiming Wen1; Yonghao Zhao1; Osman Ertorer1; Troy Topping1; Ruslan Valiev2; Enrique Lavernia1; 1University of California at Davis; 2Ufa State Aviation Technical University

11:30 AMContinuous High Pressure Torsion: Kaveh Edalati1; Zenji Horita1; 1Kyushu University

11:45 AMUnconventional ECAE Processing of Magnesium Alloys: David Foley1; Majid Al-Maharbi1; K.T. Hartwig1; Ibrahim Karaman1; Hans Maier2; L.J. Kecskes3; Suveen Mathaudhu3; 1Texas A&M University; 2University of GH Paderborn; 3US Army Research Lab

12:00 PMThermal Stability of Ultrafine Grained 316 Austenitic Stainless Steel: Auriane Etienne1; Bertrand Radiguet1; Ruslan Valiev2; Cécile Genevois1; Jean-Marie Le Breton1; Philippe Pareige1; 1GPM UMR CNRS 6634; 2Institute of Physics of Advanced Materials

12:15 PMA Study of the Thermal Stability of Nano-Twinned Copper: Christopher Saldana1; Sergey Suslov1; Matthew Hudspeth1; Eric Stach1; Srinivasan Chandrasekar1; 1Purdue University

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Characterization of NanomaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Wednesday PM Room: 214February 17, 2010 Location: Washington State Convention Center

Session Chair: Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas


2:05 PMThe Investigation on Internal Structure of Spherical Graphites in Ductile Cast Iron by Transmission Electron Microscopy: Ali-Reza Kaini-Rashid1; Arash Elhami-Khorasani1; 1Ferdowsi University of Mashhad

2:25 PMSelective Placement of Single Nanoparticles of Different Sizes: Pradeep Bhadrachalam1; Seong Jin Koh1; 1University of Texas at Arlington

2:45 PMActivation Energy for Crystallization in Nanocrystalline Exchange Coupled Magnets: Matthew Willard1; Maria Daniil2; B. Hornbuckle3; Juan Saavedra4; 1Naval Research Laboratory; 2George Washington University; 3University of Alabama - Tuscaloosa; 4University of Puerto Rico - Mayaguez

3:05 PMTunneling Spectroscopy of Colloidal Nanoparticles: Ramkumar Subramanian1; Pradeep Bhadrachalam1; Seong Jin Koh1; 1The University of Texas at Arlington

3:25 PMGrains Size Effect on Density of Geometrically Necessary Dislocations: Eduard Kozlov1; Nina Koneva1; 1Tomsk State University of Architecture and Building

3:45 PM Break

4:00 PMA Comparative Study of Characterization of CNT Turfs by Means of SEM Analysis and Stereological Techniques: H. Malik1; K. Stephenson1; D.F. Bahr1; D.P. Field1; 1Washington State University

4:20 PMNucleation Energetics and Kinetics of Solidification in Nanoscale Metallic Droplets: Ritesh Sachan1; J. Strader1; H. Krishna2; A.K. Gangopadhyay2; R. Kalyanaraman1; 1University of Tennessee-Knoxville; 2Washington University

4:40 PMPreparation, Characterization and Antibacterial Properties of Ag-Doped MgO/TiO2 Nanoparticles: Guoliang Li1; Peng Bing1; Liyuan Chai1; Yajun Gu1; 1Central South University

5:00 PMSynthesis and Performance Study of Sn-Doped Nanometer Rutile TiO2 Powder: Wu Daoxin1; 1Changsha University of Science and Technology


Advanced Materials and Fuels Enabling Future Fusion, Fission and Hybrid Reactor Systems: Diagnostics and Structural MaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Joseph Farmer, Lawrence Livermore National Laboratory; Thomas M. Anklam, Lawrence Livermore National Laboratory; Magdalena Serrano de Caro, Lawrence Livermore National Laboratory

Wednesday PM Room: 3AFebruary 17, 2010 Location: Washington State Convention Center

Session Chairs: Joseph Farmer, Lawrence Livermore National Laboratory; Magdalena Serrano de Caro, Lawrence Livermore National Laboratory


2:05 PM PlenaryMaRIE (Matter-Radiation Interactions in Extremes): An Experimental Facility Concept: Jack Shlachter1; 1Los Alamos National Laboratory

2:45 PM InvitedTEM Study of Oxide Nanoparticles in ODS Steels Developed for Radiation Tolerance: Luke Hsiung1; Michael Fluss1; Joshua Kuntz1; Bassem El-Dasher1; William Choi1; Scott Tumey1; 1Lawrence Livermore National Laboratory

3:15 PM InvitedA Small Angle X-Ray Scattering Study of Helium/Nano-Oxide Structure in ODS Steels: B. S. El-Dasher1; J. D. Kuntz1; M. Caro1; S. O. Kucheyev1; T. Van Buuren1; T. M. Willey1; A. Kimura2; J. Farmer1; 1Lawrence Livermore National Laboratory; 2Kyoto University

3:40 PM Break

3:50 PMAtomic Level Characterization of Advanced Radiation Tolerant Steels: Michael Miller1; D.T. Hoelzer1; K.F. Russell1; 1Oak Ridge National Laboratory


108

Technical Program

Wed

. PM

4:10 PM InvitedThe Corrosion of Oxide Dispersion Strengthened (ODS) Ferritic Steel in Molten Fluoride Salts: Joseph Farmer1; 1Lawrence Livermore National Laboratory

4:35 PMMagnetic Environment-Dependent Migration Pathways of Point Defects in Fe-Cr Alloys: Duc Nguyen-Manh1; Mikhail Lavrentiev1; 1UKAEA

4:55 PM InvitedTungsten-Rhenium Super Alloy Development for Ultra High Temperature Space Fission and Fusion Reactors: Jonathan Webb1; Indrajit Charit2; 1Center for Space Nuclear Research; 2University of Idaho

5:25 PM InvitedRadiation Damage Study in Mo by in situ TEM/Ion Irradiation and Computer Modeling: Meimei Li1; Mark Kirk1; Pete Baldo1; Donghua Xu2; Thibault Faney2; Brian Wirth2; 1ANL; 2University of California


Advances in Composite, Cellular and Natural Materials: Composites and ModellingSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Composite Materials CommitteeProgram Organizers: Yuyuan Zhao, The University of Liverpool; David Dunand, Northwestern University


Session Chairs: Larry Murr, University of Texas at El Paso; Martin Pech-Canul, Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional

2:00 PMAn Accurate and Efficient Method for Constituent-Based Progressive Failure Modeling of a Woven Composite: Ray Fertig1; 1Firehole Technologies

2:20 PMMicro-Mechanical Modeling and Simulations Composites Using Reconstructed Three-Dimensional Microstructures: Arun Gokhale1; Arun Sreeranganathan2; Harpreet Singh1; Yuxiong Mao1; 1Georgia Institute of Technology; 2Stress Engineering Services Inc

2:40 PMSize Dependent Ductile Failure Analysis of Particle-Reinforced Composites via Finite Element Modeling of Dislocation Punched Zone: Yeong Sung Suh1; Yong Bae Kim1; Shailendra P. Joshi2; K. T. Ramesh3; 1Hannam University; 2National Singapore University; 3Johns Hopkins University

3:00 PMSMT Reflow Jig Material Analysis: Xin Ma1; 1Samsung Electronics (Suzhou) Semiconductor Co.Ltd / SESS

3:20 PMMicrostructure in Work-Hardened Micro-Truss Materials Given Post-Forming Annealing Treatments: Brandon Bouwhuis1; Uta Klement2; Glenn Hibbard1; 1University of Toronto; 2Chalmers Institute of Technology

3:40 PM Break

4:00 PMWear Behavior of SiC /Al-Si Alloy Matrix Composites Produced by Squeeze Casting: Muna Abbass1; 1University of Technology, Baghdad

4:20 PMInfluence of Heating of Al2O3 Particle with Holding Time Variation to Compactibility of Al/Al2O3 Isotropic Composite: Widyastuti1; Mochamad Zainuri1; Agita Riani1; 1ITS Surabaya

4:40 PMEffect of Vacuum Degassing on Composites Preparation: Che Dehui1; Yao Guangchun1; Kang Wei1; Zhang Xiaoming1; 1Institute of Materials and Metallurgy, Northeastern University

5:00 PMFabrication of Carbon Nanotube Grown on Al Powders Reinforced Al Matrix Composite: Chitoshi Masuda1; Fumio Ogawa2; Ryoichi Hirashima2; 1Waseda University; 2Graduate School of Waseda University

5:20 PMDiffusion of Liquid Media in Vulkanizats: Milena Milenova1; Verjinia Aleksandrova1; Aleksandar Aleksandrov1; Gunai Halil1; 1University of Chemical Technologi and Metallurgy- Sofia

Alumina and Bauxite: Bauxite Characterization and HandlingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Jorge Aldi, Alunorte


2:10 PMReduction Roasting and Fe-Al Separation of High Iron Content Gibbsite-Type Bauxite Ores: Guanghui Li1; Na Sun1; Jinghua Zeng1; Zhongping Zhu1; Tao Jiang1; 1School of Minerals Processing & Bioengineering; Central South University

2:40 PMStudy and Application of an Improved Sintering Process with Pre-Drying of Raw Material Slurries: Hengqin Zhao1; Baozhong Lu2; Hualong Ma1; 1Zhengzhou Institute of Multipurpose Utilization of Mineral Resources, CAGS; 2Shanxi Zhongke PACL Co. Ltd

3:10 PMBayer Process and Soda-Lime Sintering Process of Special Diasporic Bauxite with High Silica: Cao Wenzhong1; Tian Weiwei1; Shong Hong1; 1Environmental and Chemical Engineering Institute, Nanchang University

3:40 PM Break

4:00 PM Discussion Time

Alumina and Bauxite: Industry Trends and IssuesSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Benny Raahauge, FLSmidth Denmark


2:10 PMHeat Transfer in the Bayer Process: Daniel Thomas1; Michael Evans1; 1WorleyParsons

109

Technical Program

Wed

. PM

2:40 PMSustainable Bauxite Mining - A Global Perspective: Christian Wagner1; Bauxite & Alumina Committee of the International Aluminium Institute1; 1International Aluminium Institute

3:10 PM Break

3:30 PMThe Need for Energy Efficiency in Bayer Refining: Lawrie Henrickson1; 1WorleyParsons

4:00 PMA Case for Replication of Alumina Plants: Anthony Kjar1; 1Gibson Crest Pty Ltd

Aluminum Alloys: Fabrication, Characterization and Applications: Emerging TechnologiesSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Processing CommitteeProgram Organizers: Subodh Das, Phinix LLC; Steven Long, Kaiser Aluminum Corporation; Tongguang Zhai, University of Kentucky


Session Chair: Subodh Das, Phinix LLC.

2:00 PMMicrostructure of Ultrasonic Impact Treated Aluminum 5456-H116: Kim Ngoc Tran1; Elissa Bumiller1; Lourdes Salamanca-Riba2; 1Naval Surface Warfare Carderock Division; 2Univeristy of Maryland

2:20 PMCharge Weld Effects in High Cycle Fatigue Behavior of a Hollow Extruded AA6082 Profile: Nicholas Nanninga1; Calvin White2; 1NIST; 2Michigan Technological University

2:40 PMAg Nanoparticles Dispersion on Surface-Modified Al Alloy Porous Body and Their Filtration Properties: Young Ik Seo1; Se Hwan An1; Dae-gun Kim1; Kyu Hwan Lee2; Young Do Kim1; 1Hanyang University; 2Korea Institute of Science and Technology

3:00 PMIncubation Behavior of Hg-LME in Aluminum: Scott Keller1; Ali Gordon1; 1University of Central Florida

3:20 PMRecent Advances in FSW Joining of Sheets on Structural Extruded Profiles: Lorenzo Donati1; 1University of Bologna

3:40 PM Break

3:55 PMAdiabatic Shear Localization of Al-Sc Alloy at Extremely High Strain Rates: Woei-Shyan Lee1; Tao-Hsing Chen2; Ging-Ting Lu1; 1Department of Mechanical Engineering, National Cheng Kung University; 2Center for Micro/Nano Science and Technology, National Cheng Kung University

4:15 PMEffect of Electric Potential on the Evolution of Defect Substructure and Fracture Surface of Aluminum under Creep: Sergey Konovalov1; Oksana Stolboushkina1; Yurii Ivanov2; Roman Filipiev1; Viktor Gromov1; 1Siberian State Industrial University; 2Institute of High Current Electronics Siberian Brach of Russian Academy of Science

4:35 PMUsing Artificial Neural Network to Optimize the Bakehardening of AL2024 and AL7075: Niloofar Kamkar Zahmatkesh1; Kamran Dehghani1; Atiyeh Nekahi1; 1Amirkabir University of Technology

4:55 PMDefects Producing Formation of Microcracks in Aluminum during Electrochemical Charging with Hydrogen: Paul Rozenak1; 1Hydrogen Energy Batteries LTD

Aluminum Reduction Technology: Hall-Héroult Cell: Process ControlSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chair: Alan Phillips, KTD LLC


2:40 PMContinuous Improvement in Aluminium Reduction Cell Process Performance with the ALPSYS® Control System: Sylvain Fardeau1; Benoît Sulmont1; Philippe Vellemans1; Claude Ritter1; 1Rio Tinto Alcan

3:10 PMA Nonlinear Model Based (NMPC) Control Strategy for the Aluminium Electrolysis Process: Steinar Kolas1; Stein Wasbø2; 1Hydro; 2Cybernetica AS

3:40 PMCVG-Venalum Potline Control and Supervisory Integrated System VEN-PCSIS: Jose Ramones1; Frangil Ramirez1; María Colmenares1; Jesus Larez1; Jesus Gonzalez1; 1CVG Venalum

4:10 PM Break

4:20 PMEfficient Thermal Balance Strategy Developed by CVG Venalum: Maria Colmenares1; Adela Ruiz1; Jesus Imery1; 1CVG Venalum

4:50 PMUsage of Fuzzy Logic as a Strategy for the Aluminium Fluoride Addition in Electrolytic Cells: Fabio Soares1; 1Exodus

5:20 PMDevelopment and Application of a Multivariate Process Parameters Intelligence Control Technology for Aluminum Reduction Cells: Yi Xiaobing1; Tian Qinghong1; 1CHALIECO


Biological Materials Science: Surface Engineering: Biomimetics and Biological ApplicationsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chairs: Marc Meyers, UCSD; Devesh Misra, University of Louisiana

2:00 PM InvitedOxide Wettability: Jim Ruud1; Molly Gentleman2; 1GE Global Research; 2Texas A&M University

2:30 PMIn situ Biomimetic Ceramic Coatings: Jadid Samad1; John Nychka1; 1University of Alberta


110

Technical Program

Wed

. PM

2:50 PMSurface Modification of Laser Processed Nitinol: Sheldon Bernard1; Susmita Bose1; Amit Bandyopadhyay1; 1Washington State University

3:10 PMGrain Boundary Grooving and Its Effect on Biological Response: Wah Wah Thein-Han1; Devesh Misra1; Mahesh Somani2; Pentti Karjalainen2; 1University of Louisiana; 2University of Oulu

3:30 PMInteraction of Ti-Fe Based Alloys with L929 Cells: Arnaud Caron1; Dmitri Louzguine-Luzgin2; Franz-Günter Sander3; Akihisa Inoue2; Hans-Jörg Fecht1; 1Institute of Micro- and Nanomaterials, University Ulm; 2WPI Advanced Institute for Materials Research, Tohoku University; 3Department of Orthodentics, University Ulm

3:50 PM Break

4:00 PMBone Cell Infiltration in Porous Graphitic Surfaces: Influence of Surface Coatings and Nanotube Grafting: Sharmila Mukhopadhyay1; Elizabeth Maurer1; Saber Hussain2; 1Wright State University; 2Air Force Research Laboratory

4:20 PMBovine Serum Albumin Protein Adsorption and Release on Electrically Polarized Biphasic Calcium Phosphates: Mohammad Tarafder1; Subhadip Bodhak1; Shashwat Banerjee1; Amit Bandyopadhyay1; Susmita Bose1; 1Washington State University

4:40 PMMagnetic Nanoparticle Interactions with Hydroxyapatite: Otto Wilson1; Meron Haimanot1; 1Catholic University of America

5:00 PMSolid-Binding Peptide-Based Antibacterial Implants: Hilal Yazici1; Mary Rood1; Brandon Wilson1; Mustafa Gungormus1; Candan Tamerler1; Mehmet Sarikaya1; 1University of Washington

5:20 PMDevelopment of Anti-Microbial Silver Coating on Stainless Steel: Paul DeVasConCellos1; Susmita Bose1; Amit Bandyopadhyay1; Lewis Zirkle2; 1BRC, Washington State University; 2Surgical Implant Generation Network (SIGN)

Bulk Metallic Glasses VII: Simulation and ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: Christopher Schuh, MIT; John Lewandowski, Case Western Reserve University

2:00 PM InvitedInfluence of Condensed Bond Enthalpy on Metallic Glass Stability: Dan Miracle1; Garth Wilks2; Amanda Dahlman3; 1AF Research Laboratory; 2General Dynamics, Inc.; 3SOCHE

2:20 PMModel Experiments to Mimic Fracture Surface Features in Metallic Glasses: Lisa Deibler1; John Lewandowski1; 1Case Western Reserve University

2:30 PM InvitedModeling the Mechanical Behavior of Metallic Glasses Using STZ Dynamics: Eric Homer1; Christopher Schuh1; 1MIT

2:50 PMContinuum Model for Bulk Metallic Glass Composites: Fadi Abdeljawad1; Mikko Haataja1; 1Princeton University

3:00 PM InvitedDeformation and Failure of Glasses at Nanoscale: Ju Li1; Erik Bitzek1; 1University of Pennsylvania

3:20 PMNumerical Deformation Simulations on Bulk Metallic Glasses Using First-Principles Methods: Lizhi Ouyang1; Despina Louca2; Gongyao Wang3; Yoshihito Yokoyama4; Peter Liaw3; 1Tennessee State University; 2University of Virginia; 3University of Tennessee; 4Tohoku University

3:30 PM Break

3:40 PM InvitedSimulating Poisson Ratio Effects on Shear Banding Behavior in Metallic Glasses: James Morris1; Takeshi Egami2; 1Oak Ridge National Laboratory; 2University of Tennessee

4:00 PMReverse Monte Carlo Simulation of Medium-Range Atomic Order in Bulk Metallic Glass Incorporating Fluctuation Electron Microscopy: Jinwoo Hwang1; Paul Voyles1; 1University of Wisconsin Madison

4:10 PMReliability of Methods of Computer Simulation of Structure of Amorphous Alloys: Mikhail Mendelev1; Mattew Kramer1; 1Ames Laboratory

4:20 PM InvitedConnecting Atomic Structure and Plastic Deformation in Zr-Based Bulk Metallic Glasses: Paul Voyles1; Jinwoo Hwang1; Jonathan Puthoff1; Don Stone1; 1University of Wisconsin, Madison

4:40 PMComputational Studies on Free Volume and Plastic Flow in Metallic Glasses: Joshua Askin1; Ashwini Bharathula1; Wolfgang Windl1; Katharine Flores1; 1The Ohio State University

4:50 PMStructure and Anelastic Relaxation in Metallic Glasses: Garth Wilks1; Daniel Miracle1; Amanda Dahlman1; 1Air Force Research Laboratory

5:00 PMAvalanches, Size-Effects, and Critical Behavior in Shared Model Metallic Glasses: K. Michael Salerno1; Craig Maloney2; Mark Robbins1; 1Johns Hopkins; 2Carnegie Mellon University / Civil & Environmental Engineering

5:10 PM InvitedStress and Temperature Induced Phase Transformation in Zr-Based Metallic Glass via Molecular Dynamics Simulation: Yunche Wang1; Chun-Yi Wu1; Jinn Chu2; Yanfei Gao3; Peter Liaw3; 1National Cheng Kung University; 2National Taiwan University of Science and Technology; 3The University of Tennessee

5:30 PMDirectional Deformation Memory and Orthogonal Bauschinger Effect in Metallic Glasses: Erik Bitzek1; David Rodney2; Ju Li1; 1University of Pennsylvania; 2Institut Polytechnique de Grenoble

5:40 PMAtomistic Simulations to Estimate Plasticity of Cu-Zr Bulk Metallic Glasses: Kyung-Han Kang1; Byeong-Joo Lee1; 1POSTECH

111

Technical Program

Wed

. PM

Carbon Management and Carbon Dioxide Reduction: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS Extraction and Processing Division, TMS: Energy CommitteeProgram Organizers: Subodh Das, Phinix LLC; Brajendra Mishra, Colorado School of Mines; Neale Neelameggham, US Magnesium LLC


Session Chair: Subodh Das, Phinix , LLC

2:00 PMUpcoming Carbon Management Legislations: Impacts and Opportunities for the Global Aluminum Industry: Adam Gesing1; Subodh Das1; 1Phinix, LLC

2:30 PMCost-Effective Gas Stream Component Analysis Techniques and Strategies for Carbon Capture Systems from Oxy-Fuel Combustion (An Overview): John Clark1; Danylo Oryshchyn1; Thomas Ochs1; Steve Gerdemann1; Cathy Summers1; 1National Energy Technology Lab

3:00 PMStrategic Approaches for CO2 Reduction Rate from Fossil Fuel Use in Steel Industry: Malti Goel1; 1INSA

3:30 PMDevelopment of Reverberatory Furnace Using in Copper Scrape Smelting by Reformed Natural Gas: Mohamed Ahmed Hammad1; 1CMRDI

4:00 PM Break

4:15 PMBauxite Residue Neutralization with Carbon Sequestration: Luis Venancio1; Emanuel Macedo2; Antonio Ernandes Paiva1; José Antonio Souza2; 1Federal Institute of Education Science and Technology - Maranháo; 2Universidade Federal do Pará

4:45 PMElectrochemical Quartz Crystal Microbalance Study on Carbon Dioxide Adsorption in the Presence of Electrosorbed Hydrogen on Cu-Gold Single Crystals: Maria Salazar-Villalpando1; 1National Energy Technology Laboratory

5:10 PMThe Thermal Gas Processing in Pre-Heating Zone of “Water-Jacket” Furnaces in “Trepça”: Ahmet Haxhiaj1; Egzon Haxhiaj2; 1University of Prishtina; 2American University in Kosovo

5:35 PMOxidation Kinetics of Fe-Cr and Fe-V Liquid Alloys under Controlled Oxygen Pressures: Haijuan Wang1; Nurni Viswanathan2; Seshadri Seetharaman1; 1Royal Institute of Technology(KTH), Sweden; 2Indian Institute of Technology Bombay, Mumbai,India

Cast Shop for Aluminum Production: Cast House Productivity and Strip CastingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: John Grandfield, Grandfield Technology Pty Ltd; Pierre Le Brun, Alcan Voreppe Research Center


Session Chair: Philippe JARRY, Unité de Recherches Fonderie ALCAN CRV

2:00 PMMeans of Improving Casthouse Productivity: Peter Whiteley1; 1Munimula Technology Pty Ltd

2:25 PMEstimating the Production Capabilities of Casthouse Equipment Configuration Options: Phillip Baker1; 1Hatch Associates

5:50 PMElectrochemical Characterization of TRC 7072AA for Heat Exchangers: Aziz Dursun1; Beril Corlu1; Canan Inel1; Murat Dundar1; Rasim Erdogan1; Mustafa Ürgen2; 1Assan Aluminium; 2Istanbul Teknik Üniversitesi

3:15 PMInfluence of the Cooling Water Temperature on Productivity and Product Quality in Twin Roll Casting with Copper Shells: Mark Badowski1; Eduardo Garate1; David Armendariz1; 1Hydro Aluminium

3:40 PMThe Use of Copper Shells by Twin Roll Strip Casters: Aldenir Clemente1; John Tsiros2; Aristeidis Arvanitis2; Dionisis Spathis2; Hans-Gunter Wobker3; 1Castcom Ltda; 2Hellenic Aluminium Industry SA ( Elval SA); 3KME Europe

4:05 PMA TEM Study of the Microstructures of 3003 and 3003-Zr Alloys Produced by Twin Roll Casting: Beril Corlu1; Ozgur Duygulu2; Selda Ucuncuoglu2; Gizem Oktay2; Aziz Dursun1; Murat Dundar1; 1Assan Aluminum; 2TUBITAK MAM

4:30 PMCasthouse Design for the Production of Air-Cooled, Low-Profile Aluminium Sows: Tom Plikas1; Tony Cesta1; Lowy Gunnewiek1; Michael Trovant1; Rui Santiago1; Jean Vanasse2; 1Hatch Ltd.; 2Aluminerie Alouette Inc.

4:55 PMThe Measurement of Heat Flow within a DC Casting Mould: Arvind Prasad1; John Taylor1; Ian Bainbridge1; 1University of Queensland

Characterization of Minerals, Metals and Materials: Characterization of Cu, Zn, Mn, Fe, Au, and Carbon PhasesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Tzong Chen, CANMET-MMSL; Yoshitaro Nose, Kyoto University



112

Technical Program

Wed

. PM

2:10 PMTernary Phase Diagram of the Zn-Sn-P System for Fabrication of Znsnp2 Compound Semiconductor: Yoshitaro Nose1; Noriyuki Tanaka1; Tetsuya Uda1; 1Kyoto University

2:35 PMMicrostructure Evolution in Copper-Clad-Steel and Copper-Clad-Aluminum Bimetallic Wires during Drawing Processes: Taisuke Sasaki1; Robert Morris1; Karen Torres1; Gregory Thompson1; Y. Syarif2; D. Fox2; 1University of Alabama; 2Fushi Copperweld, Inc.

3:00 PMOIM Characterization of a Jewelry Gold Alloy Subjected to Small-Charge Explosion: Chiara Pozzi1; John Bingert2; Donato Firrao1; 1Politecnico di Torino; 2Los Alamos National Laboratory

3:25 PMCharacterization of Tin-Rich Copper Anodes from Secondary Copper Refineries: Tzong Chen1; John Dutrizac1; 1CANMET-MMSL

3:50 PMStudy on the Interface Behavior of Ore Powder in the Organic Media: Li Dan1; Chen Qiyuan1; 1Central South University

4:15 PMSynthesis of ZnO/TiO2 and Study on its Photocatalytic Activity: Wu Daoxin1; 1Changsha University of Science and Technology



Cost-Affordable Titanium III: Creative Processing and Property Enhancement IISponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Titanium CommitteeProgram Organizers: M. Ashraf Imam, Naval Research Lab; F. H. (Sam) Froes, University of Idaho; Kevin Dring, Norsk Titanium


Session Chairs: Mitsuo Niinomi, Toyohashi University of Technology; Rodney Boyer, Boeing Commercial Airplanes

2:00 PMRapid Consolidation of Ti-6Al-4V Powders by Transformation Superplasticity: Bing Ye1; Marc Matsen2; David Dunand1; 1Northwestern University; 2The Boeing Company

2:25 PMEvaluation of Titanium for Vehicle Fuel Economy and Performance Improvement: P.K. Mallik1; Curt Lavender2; Scott Weil2; 1University of Michigan at Dearborn; 2Battelle - Pacific Northwest National Laboratory

2:50 PMTitanium Recycling Process by Disproportionation of Titanium Subchloride in Molten Magnesium Chloride: Taiji Oi1; Toru Okabe1; 1The University of Tokyo

3:15 PMModeling Beta-Transus Temperature of Titanium Alloys: N. S. Reddy1; Chan Hee Park2; Chong Soo Lee2; 1GIFT, POSTECH, Pohang, Korea; 2Department of Materials Science and Engineering, POSTECH

3:40 PM Break

3:55 PMStudy of Ti-6Al-4V in Liquid State by Electrostatic Levitation: John Li1; Won-Kyu Rhim1; William Johnson1; 1Caltech

4:20 PMLaser Additive Manufacturing of Titanium for Orthopedic Implants: James Sears1; Dana Medlin1; Jacob Fuerst1; 1South Dakota School of Mines & Technology

4:45 PMLaser Beam Welding of ATI 425 Titanium: Paul Edwards1; Todd Morton1; Greg Ramsey1; 1The Boeing Company

5:10 PMHeat Treatments for Friction Stir Welded Ti-6Al-4V: Paul Edwards1; Marc Petersen1; 1The Boeing Company

Electrode Technology for Aluminum Production: Anode Baking/Anode PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Gudrun Saevarsdottir, Reykjavik University


2:05 PMOn the Logistics of Rebuilding an Anode Baking Furnace while Maintaining Operation: Richard Coulombe1; David Machado1; John Ferguson2; Darren Carle2; 1Hatch and Associates; 2Portland Aluminium

2:30 PMSpecific Energy Consumption in Anode Bake Furnaces: Felix Keller1; Peter Sulger1; Markus Meier1; Dagoberto Schubert Severo2; Vanderlei Gusberti2; 1R&D Carbon Ltd.; 2PCE Ltda.

2:55 PMDesulphurisation Control during Anode Baking, Its Impact on Anode Performance and Operational Costs-Alba’s Experience: Hameed Abbas1; Khalil Khaji1; Daniel Sulaiman1; 1Aluminium Bahrain

3:20 PM Break

3:35 PMDevelopment of a New Improved Dry Alumina Scrubber for Emission Control from Anode Bake Furnaces: Paulo Douglas Vasconcelos1; André Mesquita2; 1Albras Alumínio Brasileiro S.A; 2 Solve Engenharia Ltda

4:00 PMBaked Anode Density Improvement through Optimization of Green Anode Dry Aggregate Composition: Khalil Khaji1; Hameed Abbas1; 1Aluminium Bahrain

4:25 PMCharacterization of Surface Topography on Carboxy Reactivity Residue: Stein Rørvik1; Lorentz Petter Lossius2; Hogne Linga2; Arne Petter Ratvik1; 1SINTEF Materials & Chemistry; 2Hydro Aluminium

Federal Funding Workshop


4:30 PM Materials Research Support at the Office of Basic Energy Sciences: John Vetrano1; 1Program Manager, Division of Materials Science and Engineering, Office of Basic Energy Sciences, Office of Science, Department of Energy

113

Technical Program

Wed

. PM

5:00 PMMaterials Research Support at the National Science Foundation: Alan J. Ardell1; 1Program Director, Metals and Metallic Nanostructures Division of Materials Research, Directorate of Mathematical and Physical Sciences, National Science Foundation

5:30 PMThe Technology Innovation Program (TIP): Funding Innovative Research for Critical National Needs: Michael A. Schen1; 1Scientific Advisor to the Director, Technology Innovation Program, NIST

General Abstracts: Electronic, Magnetic and Photonic Materials Division: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS: Electronic Materials Committee, TMS: Electronic Packaging and Interconnection Materials Committee, TMS: Nanomaterials Committee, TMS: Superconducting and Magnetic Materials Committee, TMS: Thin Films and Interfaces Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Long Qing Chen, Pennsylvania State University; Sung Kang, IBM Corporation; Mark Palmer, Kettering University




2:05 PMMultiferroic Fibers by Electrospinning: Shuhong Xie1; Jiangyu Li1; 1University of Washington

2:25 PMHigh-Temperature Thermoelectric Behaviors of Highly Dense Polycrystalline Nonstoichiometry TiOx Ceramics: Yong Liu1; Jinle Lan2; Bo-Ping Zhang3; Hongmin Zhu1; 1School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing; 2State Key Laboratory of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University; 3School of Materials Science and Engineering, University of Science and Technology Beijing

2:45 PMMicrostructure and Temperature Dependence of Ferroelectric Properties of Bi(Mgtio3)-PbTiO3 Ceramics: Seema Sharma1; D. Hall2; 1Magadh University; 2Materials Science Center

3:05 PM Break

3:35 PMBio-Inspired Methods to Self-Assemble 3D Micro-/Nano-Structures for Energy Harvesting: Huan Li1; Xiaoying Guo1; K. Jimmy Hsia1; Ralph Nuzzo1; 1University of Illinois at Urbana-Champaign

3:55 PMMonitoring Electrode Degradation in Lithium Ion Batteries Using Acoustic Emission: Kevin Rhodes1; Claus Daniel2; Nancy Dudney2; Edgar Lara-Curzio2; 1University of Tennessee; 2Oak Ridge National Laboratory

4:15 PMCuInSe2/Si Heterojunctions for Photovoltaic Applications: Okechukwu Akpa1; Shaik Shoieb1; Kalyan Das1; 1Tuskegee University

4:35 PMThe Multi-Level Switching PRAM Device Using Stacked Phase Change Materials Structure: Sung-Hoon Hong1; Heon Lee1; 1Korea University

General Abstracts: Light Metals Division: Session IISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Magnesium Committee, TMS: Recycling and Environmental Technologies Committee, TMS: Energy Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Alan Luo, General Motors Corporation; Eric Nyberg, Pacific Northwest National Laboratory


Session Chair: Eric Nyberg, Pacific Northwest National Lab

2:00 PMEnhanced Resistance of Ti-Alloys against Environmental Attack by a Combined Al- and F-Treatment: Alexander Donchev1; Michael Schütze1; Rossen Yankov2; Andreas Kolitsch2; 1DECHEMA; 2FZD

2:20 PMFabrication of Aluminum Foam with New Stabilizer Composited by Fly Ashes and Short Copper-Coated Carbon Fibers: Pei-hong Chen1; Hong-jie Luo1; Lei Wang1; Yong-liang Mu1; 1Northeastern University

2:40 PMFundamental Materials-Design Limits in Ultra Light-Weight Mg-Li Alloys Determined from Quantum-Mechanical Calculations: Martin Friak1; William Counts1; Dierk Raabe1; Joerg Neugebauer1; 1Max Planck Institute for Iron Research

3:00 PMMaterial Selection for the Lining of Aluminum Holding and Melting Furnaces: Andy Wynn1; John Coppack1; Tom Steele1; 1Thermal Ceramics

3:20 PMMechanical Properties and Precipitation Behaviors of Mg-Al-Sn and Mg-Zn-Sn Alloys: Toyohiko Konno1; JongBeom Lee1; Takahiro Ohya1; Hyeon-Taek Son2; Haguk Jeong2; 1Tohoku University; 2Korea Institute of Industrial Technology

3:40 PM Break

4:00 PMMicrostructure and Composition Modifications in the Surface Layers of a Mg AZ80 Alloy Induced by Laser Melting: Kemin Zhang1; Jianxin Zou2; 1Shanghai University of Engineering Science; 2University of British Columbia

4:20 PMMulti Sensor Data Fusion for Aluminium Cell Health Monitoring and Control: Håkon Viumdal1; Ru Yan2; Morten Liane3; Bjørn Petter Moxnex4; Saba Mylvaganam5; 1Telemark Technological Research and Development Centre (tel-tek); 2Telemark University College; 3Hydro, Primary Metal Technology; 4Hydro Aluminium; 5Telemark Technological Research and Development Centre (tel-tek) and Telemark University College

4:40 PMEffect of Copper Coatings on the Interfacial between Short Carbon Fiber and Aluminum Matrix: Yan Pengfei1; Yao Guangchun1; Shi Jianchao1; Mu Yongliang1; 1School of Materials and Metallurgy, Northeastern University

5:00 PMEffect of Mg on Microstructure and Mechanical Properties of Copper-Coated Short Carbon Fiber Reinforced Aluminum Alloy Matrix Composite: Yan Pengfei1; Yao Guangchun1; Shi Jianchao1; Mu Yongliang1; 1School of Materials and Metallurgy, Northeastern University


114

Technical Program

Wed

. PM

General Abstracts: Materials Processing and Manufacturing Division: Synthesis and ProcessingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Global Innovations Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Phase Transformations Committee, TMS: Powder Materials Committee, TMS: Process Technology and Modeling Committee, TMS: Shaping and Forming Committee, TMS: Solidification Committee, TMS: Surface Engineering CommitteeProgram Organizers: Thomas Bieler, Michigan State University; Corbett Battaile, Sandia National Laboratories



2:00 PMInnovative and Integrated Technologies for the Development of Aeronautic Components: Nicola Gramegna1; Franco Bonollo2; Emilia Della Corte1; Fabio Grosselle2; Marco Cocco3; 1ENGINSOFT; 2University of Padova - DTG; 3AVIO S.p.A.

2:20 PMSelective Laser Sintering of Magnesium Powder for Fabrication of Compact Structures: Ng Chi Chung1; 1The Hong Kong Polytechnic University

2:40 PMNovel Lead-Free Bronze Bearing Materials Produced by Powder Metallurgy Processing: Greg Vetterick1; Iver Anderson1; Matthew Besser2; 1Ames Laboratory and Iowa State University; 2Ames Laboratory

3:00 PMMicrostructural Evolution of Cu, Ni and Al Powder Particles Processed by Cold Spray: Yu Zou1; Ahmad Rezaeian1; Eric Irissou2; Jean-Gabriel Legoux2; Jerzy Szpunar1; Stephen Yue1; 1McGill University; 2National Research Council Canada (NRC)

3:20 PMRecent Trends in Cold Spray Technology: Julio Villafuerte1; Bert Jodoin2; 1Centerline Windsor Ltd; 2University of Ottawa

3:40 PM Break

4:00 PMIntroduction of High-Throughput, Commercial Application, Spark Plasma Sintering (SPS) Technology: Robert Aalund1; 1Thermal Technology

4:20 PMThermo-Mechanical Behavior of Chemically Bonded Phosphate Ceramic Composites Reinforced with Graphene Nanoplatelets: A Substantial Material Improvement toward Structural Applications: H. A. Colorado1; C. Hiel2; H. T. Hahn3; 1University of California, Los Angeles and Universidad de Antioquia; 2Composite Support and Solutions Inc.; 3University of California, Los Angeles

4:40 PMKinetics of Lamellar Decomposition in U-Nb Alloys: Robert Hackenberg1; Heather Volz1; Pallas Papin1; Ann Kelly1; Robert Forsyth1; Robert Dickerson1; Tim Tucker1; 1Los Alamos National Lab

5:00 PMSynthesis and Microstructure of TiC/TiN Porous Ceramic Composites Processed via HYSYCVD/Direct Nitridation: Jose Flores-Garcia1; Martin Pech-Canul1; 1Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional

5:20 PMThe Production of BCl3 Gas from Mechanochemical Reaction Product Containing Elemental Boron and Magnesium Oxide: Duygu Agaogullari1; Ozge Balci1; Ismail Duman1; 1Istanbul Technical University

5:40 PMCyclic Oxidation Behavior of Detonation Gun Sprayed Ni-20Cr Coating on a Boiler Steel at 900°C: Gagandeep Kaushal1; Harpreet Singh Saheet1; Satya Prakash1; 1RIMT-Institute of Engineering & Technology

Global Innovations in Manufacturing of Aerospace Materials: The 11th MPMD Global Innovations Symposium: Innovations in Primary and Secondary Forming - Aluminum, Magnesium, and Titanium Aluminides / Innovations in Machining and JoiningSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS: Shaping and Forming Committee, TMS: High Temperature Alloys CommitteeProgram Organizers: Deborah Whitis, General Electric Company; Thomas Bieler, Michigan State University; Michael Miles, BYU


Session Chairs: Ron Wallis, Wyman Gordon; David Furrer, Rolls-Royce

2:00 PMSimulating Hot Gas-Pressure Forming of Light Alloy Sheet Materials: Eric Taleff1; Louis Hector2; Paul Krajewski2; 1The University of Texas at Austin; 2General Motors Corp.

2:20 PMStress Corrosion Behavior of Ti-Al-Nb Intermetallic Alloys Made from Accumulative Roll Bonding and Reaction Annealing: Peng Qu1; Mona El-Demellawy2; Viola Acoff1; 1The University of Alabama; 2American University of Cairo

2:40 PMStudy on the Asymmetric Cross Rolling of AZ31 Magnesium Alloy: Bin Chen1; 1Shanghai Jiaotong University

3:00 PMFabrication of Dimensionally-Correct Sheet Metal Components Directly from T-6 Aluminum Alloys and Airframe Applications: Christian Weddeling1; Steven Woodward2; Bill Carson3; Glenn Daehn2; 1Technische Universitat Dortmund ; 2Ohio State University; 3Cutting Dynamics

3:20 PMRole of Precipitates in the Actuation Behavior of NiTiPt High Temperature Shape Memory Alloys: Shipeng Qiu1; Santo Padula II2; Ron Noebe2; Raj Vaidyanathan1; 1UCF; 2NASA GRC

3:40 PM Break

3:50 PM InvitedAnalysis and Optimization of Aerospace Machining Processes: Liangji Xu1; 1The Boeing Company

4:20 PMEffect of Machining Processes on Low Cycle Fatigue Behavior of a Powder Metallurgy Disk Superalloy: Jack Telesman1; Pete Kantzos2; Tim Gabb1; Louis Ghosn3; 1NASA GRC; 2Honeywell International; 3Ohio Aerospace Institute

4:40 PMInvestigation a New Method for Produce Favorable Surface Integrity in as Machined Surface of Gamma Titanium Aluminide during HSM Machining: Sajjad Kolahdouz1; 1Tehran Polytechnic ( Amirkabir University of Technology)

5:00 PMMaterial Flow Forming the Shoulder Flow Zone Using Scroll Shoulder Tool during Friction Stir Welding of Thick Section Aluminum Alloys: David Yan1; Zhan Chen1; Guy Littlefair1; 1AUT University

115

Technical Program

Wed

. PM

5:20 PMEffect of Welding Parameters on the Mechanical and Metallurgical Properties of Friction Stir Spot Welded 2024-T351 Aluminum Alloy: Amin Maki1; Masoud Goodarzi1; Shahram Kheirandish1; Mohamad Ali Safarkhanian1; 1Iran University of Science and Technology

Hume-Rothery Symposium: Configurational Thermodynamics of Materials: Session VISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Alloy Phases Committee, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Chris Wolverton, Northwestern University; Mark Asta, University of California, Davis; Gerbrand Ceder, Massachusetts Institute of Technology (MIT)



2:00 PM InvitedBulk and Surface Properties of Perovskites for Solid Oxide Fuel Cell Cathodes: Dane Morgan1; Yueh-Lin Lee1; 1University of Wisconsin - Madison

2:30 PM InvitedConfigurational Design of Functional Oxides: Hisao Yamauchi1; Maarit Karppinen1; 1Helsinki University of Technology

3:00 PMOrder and Stability of III-V Semiconductor Surface Alloys at Finite Temperature: John Thomas1; Joanna Mirecki-Millunchick1; Normand Modine2; Anton Van der Ven1; 1University of Michigan; 2Sandia National Laboratories

3:20 PMStability, Surface Energy and Specific Properties of Al-Based Complex Intermetallics: Esther Belin-Ferré1; Jean Marie Dubois1; 1CNRS Institut Jean Lamour

3:40 PM Break

4:10 PM InvitedSimulating Atomic-Scale Phenomena with Colloids: Frans Spaepen1; 1Harvard School of Engineering and Applied Sciences

4:40 PM InvitedMolecular Dynamics Simulations of Crystallization in Metallic Glasses: Diana Farkas1; 1Virginia Tech

5:10 PMStructure in Liquid Alloys Investigated by First-Principles Molecular Dynamics Simulations: Mark Asta1; Haxhimali Tomorr2; 1University of California, Davis; 2Northwestern University

5:30 PMQuantum Mechanical Corrections to Simulated Shock Hugoniot Temperatures: Nir Goldman1; Evan Reed1; Larry Fried1; 1Lawrence Livermore National Laboratory

Jim Evans Honorary Symposium: Electrochemical PhenomenaSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Fiona Doyle, University of California, Berkeley


2:10 PMThe Application of Electrochemical Techniques to Elucidate the Mechanisms of Copper Chemical Mechanical Planarization (CMP): Fiona Doyle1; Serdar Aksu2; Ling Wang3; Shantanu Tripathi4; Seungchoun Choi1; 1University of California, Berkeley; 2Solopower, Inc.; 3Applied Materials; 4Intel

2:35 PMDevelopment of Inert Anodes for Electrowinning in Calcium Chloride – Calcium Oxide Melts: Shuqiang Jiao1; Derek Fray1; 1University of Cambridge

3:00 PMElectrochemical Characterization of Nanoparticle Silver Based Zn-AgO Batteries: Abhinav Gaikwad1; Josh Gallaway1; Dan Steingart1; 1City College of New York

3:25 PMMolten Oxide Electrolysis for Lunar Oxygen Generation Using in situ Resources: Alex Vai1; James Yurko2; D. H. Wang3; Donald Sadoway1; 1Massachusetts Institute of Technology; 2Electrolytic Research Corporation; 322Ti LLC

3:50 PM Break

4:05 PMLeaching of Metal Components from Waste PCBs by Electro-Generated Chlorine in Hydrochloric Acid Solution: Eun-young Kim1; Min-seuk Kim1; Jae-chun Lee1; Kyoungkeun Yoo1; Manoj Kumar1; 1Korea Institute of Geoscience and Mineral Resources (KIGAM)

4:30 PMMorphology of Zinc Studied under Additive Control within Microfluidic Channels: Joshua Gallaway1; Abhinav Gaikwad1; Dan Steingart1; 1City College of New York

4:55 PMDirect Write Dispenser Printed Energy Storage Devices: Christine Ho1; Jay Keist1; Ba Quan1; Paul Wright1; James Evans1; 1University of California, Berkeley

Jim Evans Honorary Symposium: ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons





116

Technical Program

Wed

. PM

2:10 PMMathematical Modeling of Spooling/Unspooling Stresses in Electricity Distribution Cables: James Evans1; W. Kinzy Jones, Jr2; 1UC, Berkeley; 2Amoeba Technologies

2:35 PMComputational Modeling of Heap Leaching Processes: Mark Cross1; Chris Bennett1; Diane McBride1; A. Hernandez2; T. N. Croft1; J.E. Gebhardt2; 1Swansea University; 2Process Engineering Resources Inc

3:00 PMA T-Ψ Potential Formulation for Numerical Simulation of Induction Heating Processes: Nagy El-Kaddah1; Thinium Natarajan2; 1The University of Alabama; 2United States Steel Corporation

3:25 PMModeling on the Cast Start during Steel Continuous Casting Process: Yufeng Wang1; Lifeng Zhang1; 1Missouri University of Science and Technology

3:50 PM Break

4:05 PMImproved Computational Modeling of the Flame Spray Pyrolysis Process for Silica Nanopowder Synthesis: Miguel Olivas-Martinez1; Hong Yong Sohn1; Hee Dong Jang2; Terry Ring1; 1University of Utah; 2Korea Institute of Geoscience and Mineral Resources (KIGAM)

4:30 PMGlobal and Local Stability of Magnetically-Levitated Droplets: Ben Li1; X. Ai1; Y. Huo1; 1University of Michigan

4:55 PMDynamics of Magnetically Levitated Liquid Droplets: Valdis Bojarevics1; Koulis Pericleous1; Alan Roy1; Stuart Easter1; 1University of Greenwich

5:20 PMMangetically-Damped Flows: Numerical Simulations and Experimental Measurements: Ben Li1; X. Bing1; Y. Shu1; 1University of Michigan

Magnesium Technology 2010: Effects of Heat Treatment and Casting ProcessSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Elhachmi Essadiqi, CANMET ; Zi-Kui Liu, The Pennsylvania State University

2:00 PMOn Mechanical Properties and Microstructures of TTMP Wrought Mg Alloys: Jack Huang1; Tamir Arbel2; Laura Ligeski2; Jesse McCaffrey1; Sanjay Kulkarni1; J. Jones2; Tresa Pollock2; Raymond Decker1; Steve LeBeau1; 1Thixomat; 2University of Michigan

2:20 PMThe Effect of Thermomechanical Processing on the Tensile and Fatigue Behavior of Thixomolded® AM60: Zhe Chen1; B. Kuhr1; Alex Ritter1; Jack Huang2; Ray Decker2; Steve LeBeau2; Carl Boehlert1; 1Michigan State University; 2Thixomat

2:40 PMInfluence of the Heat Treatment on Mechanical Properties and Microstructure in LPSO Mg-Zn-Y Alloys: Masafumi Noda1; Tyuyoshi Mayama1; Yoshihito Kawamura1; 1Department of Materials Science, Kumamoto University

3:00 PMThe Effect of Zn Additions on Precipitation Hardening of Mg-Ca Alloys: Brian Langelier1; Shahrzad Esmaeili1; 1University of Waterloo

3:20 PMThe Recent Developments in Mg-Sn Based Alloy Thermodynamic Database: Manas Paliwal1; Jina Kim1; Daehoon Kang1; In-Ho Jung1; 1McGill University

3:40 PM Break

4:00 PMInfluence of Zn Additions on Age Hardening Response and Microstructure of Mg-0.3at.%Ca Alloys: Keiichiro Oh-ishi1; Chamini Mendis1; Ryuichi Watanabe2; Kazuhiro Hono1; 1National Institute for Materials Science; 2Graduate School, University of Tsukuba

4:20 PMEffect of Aging and Thermomechanical Processes in Twin Roll Cast Mg AZ91 Alloy Sheet: Ozgur Duygulu1; Selda Ucuncuoglu1; Gizem Oktay1; Onuralp Yucel2; Ali Arslan Kaya3; 1TUBITAK Marmara Research Center; 2Istanbul Technical University; 3Mugla University

4:40 PMExperimental Studies on the As-Cast Microstructure of Mg-Al Binary Alloys with Various Solidification Rates and Compositions: Dae Hoon Kang1; Manas Paliwal1; Elhachmi Essadiqi2; In-Ho Jung1; 1McGill University; 2CANMET-MTL

5:00 PMImpurity and Tracer Diffusion Studies of Magnesium and Its Alloys: Sarah Brennan1; Andrew Warren1; Kevin Coffey1; Yongho Sohn1; Nagraj Kulkarni2; Peter Todd3; 1University of Central Florida; 2University of Tennessee; 3Oak Ridge National Laboratory

5:20 PMEffect of Alloying and Solidification Rates on Microstructure of Hot Rolled and Annealed Micro-Alloyed Az31 Sheet: Elhachmi Essadiqi1; Amjad Javaid2; Mahmoud Shehata2; Teddy Muller3; Stephene Yue4; Ravi Verma5; 1CANMET ; 2CANMET; 3Evry University; 4McGill University; 5General Motors

5:40 PMTexture and Anistropy of Continuous Cast (CC) and Direct Chill Cast (DC) AZ31 Magnesium Sheets: Raj Mishra1; Jon Carter1; Sooho Kim2; 1GM R&D; 2GM R&D (retired)

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: SOFC, PEM and DMFCSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: K. Scott Weil, Pacific Northwest National Lab; Rod Borup, Los Alamos National Laboratory

2:00 PMKinetics of Oxide Scale Formation on Nicrofer-6025HT at Elevated Temperatures for Advanced Coal Based Power Plants: Vineet Joshi1; Alan Meier1; Scott K. Weil2; Jens T. Darsell2; 1Alfred University; 2Pacific Northwest National Laboratories

2:20 PMElectrochemical Characterizations of Ni-YSZ Electrode in the Thin NiFe Supported Solid Oxide Fuel Cell: Kyeong Hyun Kim1; Young Min Park2; Haekyoung Kim1; 1Yeung Nam University; 2Research Institute of Industrial Science and Technology

117

Technical Program

Wed

. PM

2:40 PMMetal-Supported Solid Oxide Fuel Cell: Gyeong Man Choi1; Hyup Je Cho1; Young Min Park2; 1POSTECH; 2RIST

3:00 PM InvitedDevelopment of Niobium Coated Stainless Steels as Bipolar Plate Materials for PEMFC Stacks: Sung-Tae Hong1; K Scott Weil2; Yong-Zoo You1; 1University of UIsan; 2Pacific Northwest National Laboratory

3:40 PM Break

3:50 PM InvitedPEM Fuel Cell Material Durability and Degradation: Rod Borup1; Rangachary Mukundan1; John Davey1; David Wood1; 1Los Alamos National Laboratory

4:30 PMPerformance of Micro-DMFCs with Two Kinds of Flow Fields: Yuhao Lu Lu1; Ramana Reddy1; 1The University of Alabama

4:50 PMPre-Oxidized and Nitrided Stainless Steel Foil for Proton Exchange Membrane Fuel Cell Bipolar Plates: Michael Brady1; Todd Toops1; Peter Tortorelli1; Heli Wang2; John Turner2; Harry Meyer1; Karren More1; Fernando Garzon3; Tommy Rockward3; Don Gervasio4; Francisco Estevez5; Jim Rakowski6; 1Oak Ridge National Lab; 2National Renewable Energy Lab; 3Los Alamos National Lab; 4Arizona State University; 5AGNI-GenCell; 6ATI Allegheny Ludlum

5:10 PMEffect of Pretreatment and Surface Treatment Conditions on Corrosion Resistance Property in Metallic Bipolar Plate Materials: Kee-Do Woo1; Min-seok Moon1; Eui-pyo Kwon1; Sang-hyuk Kim1; Duck-soo Kang1; Zhiguang Liu2; Xiao-peng Wang1; 1Chonbuk National University; 2Harbin Institute of Technology

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Physics of Defects, Dislocation Nucleation and Fracture IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Harley Johnson, University of Illinois; Douglas Spearot, University of Arkansas

2:00 PM InvitedMultiple Time Scale Analysis of the Ion Bombardment Surface Instability: Harley Johnson1; Kallol Das1; Nagarajan Kalyanasundaram1; Maryam Ghazisaeidi1; Jonathan Freund1; 1University of Illinois

2:30 PMStress and Strain near Rough Surfaces and Interfaces: Lawrence Friedman1; 1Penn State University

2:50 PMSaddle-Node Scalings during Dislocation Nucleation in Perfect Crystals under Inhomogeneous Loads: Asad Hasan1; Craig Maloney1; 1Carnegie Mellon University / Civil & Environmental Engineering

3:10 PMPhase Stability and Transformations in NiTi from Density Functional Theory Calculations: Karthik` Guda Vishnu1; Alejandro Strachan1; 1Purdue University

3:30 PM Break

3:50 PM InvitedCoupled Continuum - Density Functional Theory Investigation of Crack-Tip Propagation and Dislocation Nucleation: Arun Nair1; Derek Warner1; Richard Hennig1; 1Cornell University

4:20 PMModeling of Magnetic Thin Film with Misfit Dislocations: Nirand Pisutha-Arnond1; Bo Yang2; Dong-Hee Lim1; Mark Asta2; Katsuyo Thornton1; 1University of Michigan; 2University of California, Davis

4:40 PMStrain Engineering on Si/Ge Nanoscale Heterostructures: Yumi Park1; Winnie Tan1; Alejandro Strachan1; 1Purdue University

5:00 PMAnomalous Dissipation in Single-Walled Carbon Nanotube Resonators: Peter Greaney1; Giovanna Lani2; Giancarlo Cicero3; Jeffrey Grossman1; 1Massachusetts Institute of Technology; 2Ecole Polytechnique; 3Polytechnic of Torino

Neutron and X-Ray Studies of Advanced Materials III: Diffuse Scattering IISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Darren Goosens, Australian national University; Yang Ren, Argonne National Laboratory

2:00 PM KeynoteMonte Carlo Simulation of Disorder in the Ag+ Fast Ion Conductors Pearceite and Polybasite: Richard Welberry1; 1Research School of Chemistry

2:30 PM InvitedMonte Carlo Modelling of Diffuse Scattering from Single Crystals: Darren Goossens1; Aidan Heerdegen1; 1Australian National University

2:50 PM InvitedPhase Transition under High Pressure in Ionic Liquid Based Mixtures: Hiroshi Abe1; Yusuke Imai1; Takefumi Goto1; Takahiro Takekiyo1; Yukihir Yoshimura1; 1National Defense Academy

3:10 PM InvitedSynchrotron High-Energy X-Ray Study of Advanced Materials with Nano-Scale Structures: Yang Ren1; Valeri Petkov2; Yandong Wang3; Zhihua Nie3; Dongmei Liu4; Peter Liaw5; 1Argonne National Laboratory; 2Central Michigan University; 3Beijing Institute of Technology; 4Northeastern University; 5University of Tennessee

3:30 PM InvitedUnlocking the ‘True’ Structure of Complex Materials Using Total Scattering: Thomas Proffen1; 1Los Alamos National Laboratory

3:50 PMX-Ray Diffraction Investigation of Ferroelectric Constitutive Behavior at Multiple Length Scales: Goknur Tutuncu1; Mesut Varlioglu1; Ulrich Lienert2; Ersan Ustundag1; 1Iowa State University; 2Argonne National Laboratory

4:05 PMImaging Strains on the Nanoscale with Coherent X-Ray Diffraction Microscopy: Ross Harder1; Loren Beitra2; Steven Leake2; Marcus Newton3; Ian Robinson2; 1Argonne National Lab; 2University College London; 3University of Surrey


118

Technical Program

Wed

. PM

4:20 PM Break

4:30 PM InvitedGeometry, Topology and Structure of Amorphous Solids: Zbigniew Stachurski1; Richard Welberry1; 1Australian National University

4:50 PM InvitedIn-Situ Neutron Diffraction Study of B2 CoTi and CoZr: Rupalee Mulay1; James Wollmershauser1; Sean Agnew1; 1University of Virginia

5:10 PMInfluence of Calcium and Strontium Substitution on the Expansion Behaviors and Oxygen Vacancy Concentration of the Lanthanum Ferrite: David Thomsen1; Patrick Price1; Ellen Rabenberg1; Darryl Butt1; 1Boise State University

5:20 PMApplication of Small Angle Neutron Scattering to Study the Nucleation and Growth Mechanisms of Thin and Thick Films: Yong Choi1; B. S. Seong2; E. J. Shin2; 1Sunmoon University; 2KAERI

5:35 PMNon-Destructive Evaluation of Crack Size and Distribution of Eco-Friendly Trivalent Chromium Deposits for Automobile Industries by Small Angle Neutron Scattering: Yong Choi1; Sik C. Kwon2; Eun J. Shin3; Baik S. Seong3; 1Sunmoon University; 2KIMS; 3KAERI

5:50 PMEXAFS Measurements in Fe-Based Magnetostrictive Single Crystals: Gavin Garside1; Shamita Shitole1; Sivaraman Guruswamy1; 1University of Utah

Nuclear Energy: Processes and Policies: CharacterizationSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Nuclear Materials Committee, TMS: Public and Governmental Affairs CommitteeProgram Organizers: Brajendra Mishra, Colorado School of Mines; Aladar Csontos, U.S. Nuclear Regulatory Commission; Stuart Maloy, Los Alamos National Laboratory; Jeremy Busby, Oak Ridge National Laboratory; Sue Lesica, U.S. Department of Energy’s Office of Nuclear Energy


Session Chairs: Todd Allen, Idaho National Laboratory; Aladar Csontos, US Nuclear Regulatory Commission

2:00 PM KeynoteCharacterization of Neutron- and Ion-Irradiated Nano-Structured Ferritic Alloys by TEM: James Bentley1; David Hoelzer1; 1Oak Ridge National Laboratory

2:35 PMA Multilab-Multitechnique SANS, APT and TEM Characterization Study of a Reference Nanstructured Ferritic Alloy: G. Robert Odette1; Nicholas Cunningham1; Yuan Wu1; Erin Haney1; Emmanuelle Marquis1; Peter Hosemann1; Eric Stergar1; 1UC Santa Batrbara

3:00 PMCharacterization of 14YWT As Atomized, Milled and Annealed Powders and Consolidated Alloys: Nicholas Cunningham1; Yuan Wu1; G. Robert Odette1; Erin Haney1; 1UC Santa Barbara

3:25 PMDevelopment and Characterization of Radiation Tolerant Nanostructured Ferritic Steels: Michael Miller1; David Hoelzer1; Kaye Russell1; 1ORNL

3:50 PM Break

4:05 PMCharacterization of Nano-Scale Particles in Mechanically Alloyed and HIP-ed Oxide Dispersion Strengthened Steels: Dhriti Bhattacharyya1; Patricia Dickerson1; Peter Hosemann1; G. Odette2; Michael Nastasi1; Amit Misra1; Stuart Maloy1; 1Los Alamos National Laboratory; 2University of California, Santa Barbara

4:30 PMTEM Characterization of a Monolithic U-Mo Plate-Type Nuclear Fuel: Dennis Keiser1; JanFong Jue1; Bo Yao2; Emmanuel Perez2; Yongho Sohn2; 1Idaho National Laboratory; 2University of Central Florida

4:55 PMWeldability Characteristics of Oxide Dispersion Strengthened Alloys: An Overview: Kalyan Chitrada1; Ramprashad Prabhakaran2; Jiye Wang3; Larry Zirker2; Mitchell Meyer2; James Cole2; Korukonda Murty4; Rajiv Mishra3; Darryl Butt5; Megan Frary5; Indrajit Charit1; 1University of Idaho; 2Idaho National Laboratory; 3Missouri University of Science and Technology; 4North Carolina State University; 5Boise State University

5:20 PMMulti-Scale Characterizations and Formation Mechanism in an ODS Steel Elaborated by Reactive Ball-Milling and Annealing: Mathilde Brocq1; Fabrice Legendre1; Bertrand Radiguet2; Marie-Hélène Mathon3; Fabien Cuvilly2; Philippe Pareige2; 1SRMP - CEA; 2GPM-Université de Rouen; 3LLB

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Microstructure, Intermetallics,Whisker(I)Sponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: John W. Morris, University of California-Berkeley; Andre Lee, Michigan State University

2:00 PMA Quantitative Assessment of Microstructural Coarsening of SnAgCu Solders: Effect of Metallization and Thermo-Mechanical History: Praveen Kumar1; Zhe Huang1; Indranath Dutta1; Ganesh Subbarayan2; Vikas Gupta3; 1WSU; 2Purdue University; 3Texas Instruments

2:15 PMInterfacial Reactions of Sn3.0Ag0.5Cu Solder with Cu-Mn UBM during Aging: Chien-Fu Tseng1; Jenq Gong Duh1; 1National Tsing Hua University

2:30 PMCross-Interaction between Ni and Cu across a High-Lead Solder Joint with Different Solder Volume: Chih-Chiang Chang1; C. Robert Kao1; 1National Taiwan University

2:45 PMCurrent Stressing Effect on Intermetallic Compound Growth Kinetics in Cu Pillar/Sn Bump: Myeong-Hyeok Jeong1; Jae-Won Kim1; Gi-Tae Lim1; Byoung-Joon Kim2; Kiwook Lee3; Jaedong Kim3; Young-Chang Joo2; Young-Bae Park1; 1Andong National University; 2Seoul National University; 3Amkor Technology Korea Inc

3:00 PMFormation and Growth of Intermetallic Compound (Cu6Sn5) at Early Stages in Lead-Free Soldering: Min Soo Park1; Raymundo Arroyave1; 1Texas A&M University

119

Technical Program

Wed

. PM

3:15 PMLocal Mechanical Properties of Cu6Sn5 Intermetallics in Pb-Free Solder Joints by Microcompression Testing of Pillars: Ling Jiang1; Nik Chawla1; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering

3:30 PM Break

3:45 PMEffects of Minor Ni Doping on Interfacial Reaction and Microstructure Variation in the Cu/Sn-3Ag-0.5Cu-xNi/Au/Ni Sandwich Structure: Chi-Yang Yu1; Jenq-Gong Duh1; Tae-Kyu Lee2; Michael Tsai2; Kuo-Chuan Liu2; 1National Tsing Hua University; 2CISCO

4:00 PMMechanical Properties of Interfacial IMCs in Solder Joints Evaluated by Nanoindentation: Y.L. Shen1; C. W Su2; J. M. Song2; S. Y. Chen1; 1National Taiwan University of Science and Technology; 2National Dong Hwa University

4:15 PMKinetics of Intermetallic Compound Formation at the Interface between Sn-3.0Ag-0.5Cu Solder and Cu-Zn Alloy Substrate: Youngmin Kim1; Hee-Ra Roh1; Young-Ho Kim1; 1Hanyang University

4:30 PMSn Whiskers and Grain Boundary Sliding: John Osenbach1; 1LSI Corporation

4:45 PMCritical Current Density of Inhibiting the (Cu,Ni)6Sn5 Formation in the Ni-side of Cu/Solder/Ni Joints: W.H. Wu1; H.L. Chung1; C.N. Chen1; Cheng-En Ho1; 1Yuan Ze University

5:00 PMInterfacial Reactions between near Eutectic Snagcu Solder Alloys and Electrolytic Au/Ni Substrates: Mao Gao1; Eric Cotts1; 1Binghamton University

5:15 PMEffect of Ag on the Kirkendall Void Formation in Sn-Ag/Cu Solder Joints: Sunghwan Kim1; Jin Yu1; 1KAIST

Polymer Nanocomposites: Metals and other NanoparticlesSponsored by: The Minerals, Metals and Materials SocietyProgram Organizer: John Zhanhu Guo, Lamar University


Session Chairs: Katie Weihong Zhong, Washington State University; Qiang Wang, Institute of Chemical and Engineering Sciences (ICES); Lu Sun, Praxair Electronics


2:05 PM KeynoteEffect of Particle Size on the Strength of Nanocomposites: C. T. Sun1; 1Purdue University

2:45 PMElectrically Conductive Nanocomposites with Thermoplastic Polymers: Nathan Hansen1; George Hansen1; Greg Sawyer2; 1Conductive Composites Company; 2University of Florida

3:05 PMEffects of Incorporation of Silica and Zirconia Nanoparticles on the Thermal and Thermomechanical Properties of Polymer Nanocomposites: Muhammad Sajjad1; Thomas Koch1; Sabine Seidler1; 1TU Wien

3:25 PMElectrical Resistance Investigation of Cotton Fabrics after Treating with Polyaniline Solution: Cem Gunesoglu1; Sinem Gunesoglu1; Suying Wei2; Zhanhu Guo2; 1Gaziantep University; 2Lamar University

3:45 PM Break

4:15 PM InvitedMultifunctional Conductive Nanocomposites: Fabrication, Property Analysis and Applications: John Zhanhu Guo1; Di Zhang1; Pallavi Mavinakuli1; Jiahua Zhu1; Suying Wei1; 1Lamar University

4:40 PM InvitedMagnetic Properties of Some Polyaniline-Based Magnetic Nano-Composites for EMI Applications: Jayanta Banerjee1; O Perales-Pérez1; J. Banerjee1; 1University of Puerto Rico at Mayaguez

5:05 PMEffect of Nanometer-Sized Titanium Dioxide on the Piezodielectric Effect of Carbon Fiber Sulphoaluminate Cement Composites: Cheng Xin1; Wang Shoude1; 1University of Jinan

5:25 PMDesign, Synthesis, and Characterization of Polymer Matrix Nanophosphor Composite Scintillators: Meredith Barta1; Jason Nadler1; Zhitao Kang1; 1Georgia Institute of Technology

5:45 PMNano-Moldable Polymer-Ceramic Composite: Isaac Finger1; 1University of Florida


Processing Materials for Properties: Processing-Microstructure-PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Ramana Reddy, The University of Alabama; John Moore, Colorado School of Mines

2:00 PM KeynoteMaterials Processing Augmentation in Hostile Environments for Hydrocarbon Recovery: Rashmi Bhavsar1; Indranil Roy1; Christian Wilkinson1; 1Schlumberger

2:30 PMComputational and Experimental Investigation into the Oxidation Behavior of HVOF-Sprayed Cryomilled NiCrAlY Bond Coats: Kaka Ma1; Jianrong Song2; Lianmeng Zhang2; Julie Schoenung1; 1University of California, Davis; 2Wuhan University of Technology

2:50 PMHigh Thermal Gradient Directional Solidification and Its Application in the Processing of Nickel-Based Superalloys: Lin Liu1; 1Northwestern Polytechnical University

3:10 PM KeynoteIn Search of Rapid Processing Routes for CIGS Photovoltaic Absorber Materials: Carelyn Campbell1; 1National Institute of Standards and Technology

3:30 PMMicrostructure and Properties of New Wear Resistant Steel with High Strength and High Toughness: Li Hongbin1; 1Baosteel


120

Technical Program

Wed

. PM

3:50 PMEnhanced Electrical and Mechanical Properties of the Heat-Treated Cu-Ni-(Si, Ti) Alloys: Kwangjun Euh1; Seung Zeon Han1; Sangshik Kim2; Sung Hwan Lim3; 1Korea Institute of Materials Science; 2Gyeongsang National University; 3Kangwon National University

4:10 PMPreparation and Mechanical Properties of Nanostructured Cryomilled NiCrAlY Alloy Fabricated by Spark Plasma Sintering: Jianrong Song1; Kaka Ma2; Lianmeng Zhang3; Julie Schoenung2; 1University of California - Davis and Wuhan University of Technology, China; 2University of California - Davis; 3Wuhan University of Technology, China

4:30 PMThermal History and Mechanical Behavior of PH13-8Mo Fabricated via LENS®: Jonathan Nguyen1; Baolong Zheng1; Yuhong Xiong1; William Hofmeister2; John Smugeresky3; Yizhang Zhou1; Enrique Lavernia1; 1University of California, Davis; 2University of Tennessee Space Institute; 3Sandia National Laboratories

4:50 PMTransformation Induced Plasticity in Fe-Cr-V-C: Uta Kuehn1; Jan Romberg1; Norbert Mattern1; Juergen Eckert1; 1IFW

5:10 PMAccounting for High Temperature Measurements with Changing Effective Emissivity in PTAW Processing: Tonya Wolfe1; Hani Henein1; 1University of Alberta

5:30 PMThe Role of Microtexture on Fatigue Lifetime Variability and Crack Initiation Mechanisms: Christopher Szczepanski1; James Larsen2; Lee Semiatin2; 1UTC/AFRL; 2AFRL

Recycling General Sessions: Waste UtilizationSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies CommitteeProgram Organizer: Joseph Pomykala, Argonne National Laboratory


Session Chair: Jeffrey Spangenberger, Argonne National Laboratory

2:00 PMAnalysis of Light Hydrocarbon Gases in the Pyrolysis and Combustion Processes of Waste Tires: Joner Alves1; Chuanwei Zhuo2; Yiannis Levendis2; Jorge Tenorio1; 1University of Sao Paulo; 2Northeastern University

2:25 PMUtilization of Brazilian Waste Mica in Preparation of Pigments: Shirleny Santos1; Silvia Cristina França2; Tsuneharu Ogasawara3; 1COPPE/UFRJ/CETEM; 2CETEM; 3COPPE/UFRJ

2:50 PMEffect of Processes in Degraded Decoloration of Frying Oil Treated with Brazilian Clays: Elaine Araújo1; Edcleide Maria Araújo1; Marcus Vinícius Lia Fook1; Sara Verusca de Oliveira1; Divånia Ferreira Da Silva1; Dayanne Diniz De Souza1; 1Federal University of Campina Grande-UFCG

3:15 PMReuse of Fired Red Ceramic Brick Waste: Carlos Maurício Vieira1; Sergio Monteiro1; 1State University of the North Fluminense

3:40 PMEvaluating the Compressive Strength and Microstructure of Recycled Glass Compacts: Adele Garkida1; Jiann-Yang Hwang2; Xiaodi Huang2; Bowen Li2; 1Ahmadu Bello University; 2Michigan Technological University

4:05 PM Break

4:20 PMPreparation of Building Material Using Elemental Sulfur and Heavy-Metal Containing Slag: Yanjie Liang1; Liyuan Chai1; Xiaobo Min1; Zhihui Yang1; Shaohui Yang1; Xi Cao1; 1Central South University

4:45 PMStudy on the EMD Residue and Shale for Preparing Solidification Brick: Wang Jia1; Peng Bing1; Chai Li Yuan1; Zhang Jin Long1; Li Guo Liang1; 1Central South University

5:10 PMExperimental Study on the EMD Residue Admixture Cementitious Material: Wang Jia1; Peng Bing1; Chai Li Yuan1; Zhang Jin Long1; Li Guo Liang1; 1Central South University

5:35 PMStudy of Recycling Aggregates of Concrete Waste in Pervious Concrete: Prakash Parasivamurthy1; KiranKumar BV1; Veena Jawali2; 1Dayanada Sagar College of Engineering; 2B.M.S.College of Engineering

Solid-State Interfaces: Toward an Atomistic-Scale Understanding of Structure, Properties, and Behavior through Theory and Experiment: Thermal, Electrical, and Thermoelectric BehaviorsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS: Chemistry and Physics of Materials CommitteeProgram Organizers: Michael Demkowicz, Massachusetts Institute of Technology; Douglas Medlin, Sandia National Laboratories; Emmanuelle Marquis, University of Oxford


Session Chair: Srinivasan Srivilliputhur, University of North Texas

2:00 PM InvitedTheoretical and Simulation-Based Predictions of Grain Boundary Kapitza Resistance in Semi-Conductors: Sylvie Aubry1; Patrick Schelling2; Chris Kimmer3; Xiaowang Zhou4; Reese Jones4; 1Stanford University; 2University of Central Florida; 3University of Louisville; 4Sandia National Laboratories

2:30 PM InvitedThermal Conductance of Solid-State Interfaces: David Cahill1; 1University of Illinois

3:00 PMIntrinsic Electric Fields in Nanostructured Oxide Ceramics: Pankaj Nerikar1; Christopher Stanek1; Susan Sinnott2; Simon Phillpot2; Blas Uberuaga1; 1Los Alamos National Laboratory; 2University of Florida

3:20 PMSchottky Barriers at Interfaces between Transition Metals and Strontium Titanate: Matous Mrovec1; Jan-Michael Albina1; Bernd Meyer2; Christian Elsaesser1; 1Fraunhofer Institute for Mechanics of Materials; 2University of Erlangen-Nuernberg

3:40 PMRole of an Interface on the Thermal and Mechanical Characteristics of Heterogeneous Nanocomposites by Correlating Molecular-Quantum Study Focusing on Nanoscale Diffusion and Defect Formation: Vikas Samvedi1; Vikas Tomar2; 1University of Notre Dame; 2Purdue University

4:00 PMInterfacial Defect Mechanism in the Precipitation of Tetradymite Plates in Rocksalt-Structured Tellurides: Douglas Medlin1; J. Sugar1; 1Sandia National Labs

121

Technical Program

Wed

. PM

Stochastic Methods in Materials Research: Stochastic Methods I: New Algorithms and Model BuildingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Richard Hennig, Cornell University; Dallas Trinkle, University of Illinois, Urbana-Champaign


Session Chairs: Richard Hennig, Cornell University; Dallas Trinkle, University of Illinois Urbana-Champaign

2:00 PM InvitedBuilding Effective Models from Sparse but Precise Data: Axel van de Walle1; Eric Cockayne2; 1Caltech; 2NIST

2:30 PMStatistical Learning and Materials Informatics: Krishna Rajan1; Chang Sun Kong1; Prasanna Balachandran1; 1Iowa State University

2:50 PM Break

3:10 PM InvitedError Estimation in Density Functional Theory: Vivien Petzold1; James Sethna2; Karsten Jacobsen1; 1Technical University of Denmark; 2Cornell University

3:40 PMApplications of Stochastic Geometry for Statistical Representation, Stereological Characterization, Modeling, and Simulations of Material Microstructures: Arun Gokhale1; 1Georgia Institute of Technology

4:00 PMFractal Analysis of Microstructural Images for Evaluation of HSLA Steel: Mita Tarafder1; I. Chattoraj1; S.K. Das1; M. Nasipuri2; S. Tarafder1; 1National Metallurgical Laboratory; 2Jadavpur University

4:20 PM Break

4:40 PMTwo Stochastic Mean-Field Polycrystal Plasticity Methods: Michael Tonks1; John Bingert2; Curt Bronkhorst2; Daniel Tortorelli3; 1Idaho National Laboratory; 2LANL; 3University of Illinois at Urbana-Champaign

5:00 PMA Stochastic Continuum Model for Growth and Optimization of Epitaxial Quantum Dot Multilayers: Chandan Kumar1; Lawrence Friedman1; 1The Pennsylvania State University

5:20 PMMonte Carlo Method for Electromagnetic Scattering Incorporating Finite Element Methods to Generate Scatter Sources for Nanoscale Inclusions in Composites: Erik Sapper1; Brian Hinderliter1; 1North Dakota State University

Sustainable Materials Processing and Production: Sustainability in EducationSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Wednesday PM Room: 2BFebruary 17, 2010 Location: Washington State Convention Center

Session Chairs: Diana Lados, Worcester Polytechnic Institute; Adam Powell, Opennovation


2:05 PM InvitedAppropriate Technology and Sustainability: Richard LeSar1; 1Iowa State University

2:30 PM InvitedCeramics for Life in Rural Africa: A TMS Grant Update: Nathan Johnson1; Sara Moser1; Andrew Havens1; 1Iowa State University

2:55 PM InvitedDepth through Breadth: Addressing the Grand Challenges of Teaching Sustainability: Svetlana Nikitina1; 1Worcester Polytechnic Institute

3:20 PMEngagement is an Essential Skill in the 21st Century: Dirk van Zyl1; 1University of British Columbia

3:45 PM Break

3:55 PMEmbracing Sustainability in the Materials Engineering Curriculum: Suggestions and Examples to Build Competencies for Today’s Materials Engineering Graduate: Katherine Chen1; Linda Vanasupa1; Trevor Harding1; Blair London1; Richard Savage1; 1Cal Poly State University

4:20 PMSustainability and Mineral Resource Utilisation: A Study Guide: William Rankin1; 1CSIRO Minerals

4:45 PM InvitedTeaching Design for “Sustainability” on the Basis of Metallurgy and Materials Science: Markus Reuter1; 1Ausmelt Limited

5:10 PMMaterials and Society Resources on the Teaching Archive of the Materials Digital Library: Adam Powell1; Laura Bartolo2; Matthew Krane3; Edwin Garcia3; Lan Li2; 1Opennovation; 2Kent State University; 3Purdue University



122

Technical Program

Wed

. PM

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Crystal Defects and Mechanical PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, Univ of Groningen


Session Chairs: Ralf Drautz, Ruhr-Universität Bochum; Petros Sofronis, University of Illinois

2:00 PM InvitedHeating Graphene in a Microscope: Ju Li1; Liang Qi1; Li Feng1; Jianyu Huang2; Ping Lu2; Feng Ding3; Boris I. Yakobson3; 1University of Pennsylvania; 2Sandia National Laboratories; 3Rice University

2:25 PM InvitedLayer Growth by Ion Bombardment: Miklos Menyhard1; Peter Sule1; Janos Labar1; 1Research Institute for Technical Physics and Materials Science

2:50 PMThe Strength and Deformation of Gum Metal: John Morris1; Eizabeth Withey1; Rohini Sankaran1; Andrew Minor1; Daryl Chrzan1; 1University of California - Berkeley

3:05 PMDeformation of Preciptate Platelets in High Strength Aluminum Alloys under High Strain-Rate Compression: K. El-Khodary1; William Lee1; L. Sun1; Bryan Cheeseman2; Donald Brenner1; Mohammed Zikry1; 1North Carolina State University; 2Army Research Laboratory

3:20 PM Break

3:40 PM InvitedPhysical and Mechanical Properties of Co3 (Al,W) with the L12 Structure: Haruyuki Inui1; Norihiko Okamoto1; Katsushi Tanaka1; Kyosuke Kishida1; Takashi Ohashi1; 1Kyoto University

4:05 PM InvitedPropagation of Shear Transformation Zone at Sound Velocity in Metallic Glass: Shin Takeuchi1; Yasushi Kamimura1; Takaaki Yoshihara1; Keiichi Edagawa1; 1Tokyo University of Science

4:30 PM InvitedMultiscale Models of Dislocation Core Structures in Iron and Copper: Nasr Ghoniem1; A. Takahashi2; Z. Chen3; N. Kioussis3; G. Lu3; 1University of California, Los Angeles; 2Science University of Tokyo; 3California State University, Northridge

4:55 PMQuantum Monte Carlo Calculations for Point Defects in Silicon: Richard Hennig1; W. Parker2; K. Driver2; J. Wilkins2; 1Cornell University; 2The Ohio State University

5:10 PMModeling of Point Defect Diffusion in Fe-Cr-Ni Alloys Using Ab-initio Based Multi-Scale Approach: Samrat Choudhury1; Benjamin Swoboda1; Leland Barnard1; Julie Tucker2; Anton Van der Ven3; Todd Allen1; Dane Morgan1; 1University of Wisconsin, Madison; 2Knolls Atomic Power Laboratory; 3University of Michigan - Ann Arbor

5:25 PMComputing Ab Initio Free Energy Contributions of Point Defects: Blazej Grabowski1; Lars Ismer1; Tilmann Hickel1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung

5:40 PMAb Initio Modeling of Dislocation/Solute Interactions in Mg: Joseph Yasi1; Louis Hector2; Dallas Trinkle1; 1University of Illinois at Urbana-Champaign; 2General Motors Technical Center

5:55 PMEmbrittlement in Metals: An Atomistic Study of the Hydrogen Enhanced Local Plasticity (HELP) Mechanism: Johann von Pezold1; Liverios Lymperakis1; Jörg Neugebauer1; 1Max-Planck-Institut für Eisenforschung GmbH

6:10 PMAtomic Scale Study of the Interaction of Point Defects with Edge and Screw Dislocations in Bcc Iron: Erin Hayward1; Blas Uberuaga2; Chaitanya Deo1; Carlos Tome2; 1Georgia Institute of Technology; 2Los Alamos National Laboratory

6:25 PMSimulation of Tensile Loading of Ag <110> Nanowires with Extremely Slow Strain Rates Using Accelerated Molecular Dynamics: Chun-Wei Pao1; Danny Perez2; Sriram Swaminarayan2; Arthur F. Voter2; 1Research Center for Applied Sciences, Academia Sinica; 2Los Alamos National Laboratory

6:40 PMModeling of Deformation and Microstructure Evolution in Severe Plastic Deformation: Hyoung Seop Kim1; 1POSTECH

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Dislocations IISponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Christopher Woodward, Air Force Research Laboratory; Ladislas Kubin, CNRS

2:00 PM InvitedAtomic-Scale Modelling of Dislocation Interaction with Nanoscale Obstacles: David Bacon1; Yuri Osetsky2; 1University of Liverpool; 2Oak Ridge National Laboratory

2:25 PM InvitedMultiscale Models of Dislocation Core Structures in Iron and Copper: N. M. Ghoniem1; A. Takahashi2; Z. Chen3; N. Kioussis3; G. Lu3; 1University of California, Los Angeles; 2Science University of Tokyo; 3California State University, Northridge

2:50 PMIs Dislocation Locking Possible without External Stress?: Bella Greenberg1; Mike Ivanov2; Alexander Patselov1; 1Institute of Metal Physics, Ural Branch, Russian Academy of Sciences; 2Kurdjumov Institute of Metal Physics, National Academy of Sciences of Ukraine

3:05 PMBrittle–Ductile Behavior and Dislocation Core Structure in Y- and Co-Based B2 Intermetallics: Oleg Kontsevoi1; Yuri Gornostyrev2; Arthur Freeman1; 1Northwestern University; 2Institute of Metal Physics

3:20 PM Break

3:40 PM InvitedStructure of Random Tilt Boundaries and Dislocation Emission Behavior under Stress: Diana Farkas1; Laura Patrick1; Nicklas Floyd1; 1Virginia Tech

123

Technical Program

Wed

. PM

4:05 PM InvitedCopper Precipitation Strengthening of Iron and Steels. Dislocation Locking Mediated by Phase Instability: Yuri Gornostyrev1; 1Institute of Metalphysics of the Ural Branch of RAS and CJSC Institute of Quantum Materials Science, Ekaterinburg, Russia

4:30 PMA Peierls Model of Atomic Stick-Slip Frictional Behavior: Yanfei Gao1; 1University of Tennessee

4:45 PMAtomistic Modeling of Screw Dislocation Mobility in Alpha-Fe: Neeraj Thirumalai1; Peter Gordon1; Ju Li2; Youhong Li1; Mikhail Mendelev3; Michael Luton1; 1ExxonMobil Research and Engineering; 2University of Pennsylvania; 3Ames Laboratory

5:00 PMAtomistically Informed 3D Dislocation Dynamics Simulations of BCC Ta: Z. Wang1; Irene Beyerlein1; 1Los Alamos National Laboratory

5:15 PMAtomistic Investigation and Analysis of Dislocation Precipitate Interactions in Al-Cu Alloys: Chandra Veer Singh1; Derek Warner1; 1Cornell University

5:30 PMAtomistic Simulations of Athermal Cross-Slip at Screw Dislocation Intersections in Face-Centered Cubic Nickel: Satish Rao1; Dennis Dimiduk2; El-Awady Jafaar3; Triplicane Parthasarathy1; Michael Uchic2; Christopher Woodward2; 1UES Inc.; 2Air Force Research Laboratory; 3UTC

5:45 PMDislocation Statistics in FCC Crystals: Mamdouh Mohamed1; Jie Deng1; Anter El-Azab1; 1Florida State University

6:00 PMModeling of Magnesium <a> and <c+a> Dislocation Cores by First Principles and EAM Potentials: Thomas Nogaret1; Joseph A. Yasi2; Louis Hector Jr3; Dallas Trinkle2; William Curtin1; 1Brown University; 2University of Illinois at Urbana-Champaign; 3General Motors Technical Center

Thermo-Mechanical Response of Molecular Solids: Multi-Resolution Theory, Simulations, and Experiments: Molecular Solids ISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials DivisionProgram Organizers: Alejandro Strachan, Purdue University; Thomas Sewell, University of Missouri-Columbia; Rodolfo Pinal, Purdue University; Chunyu Li, Purdue University


Session Chair: Rodolfo Pinal, Purdue University


2:05 PM InvitedShock-Induced Subgrain Microstructures as Possible Homogenous Sources of Hot Spots and Initiation Sites in Energetic Polycrystals: Julian Rimoli1; Ercan Gurses2; Michael Ortiz2; 1MIT; 2Caltech

2:35 PMShear-Induced Disordering in Small Molecule Organic Crystalline Solid Materials: Modeling, Characterization and Relevance in Pharmaceutical Drug Products: Peter Wildfong1; 1Duquesne University

2:55 PMThermo-Mechanical and Spectroscopic (TMS) Analyses of Structural Transformation Produced by Mechanical Processing: Derya Cebeci1; Diana Guzman1; Dea Herrera2; Dor Ben-Amotz1; M. Teresa Carvajal1; 1Purdue University; 2Facultad de Farmacia, UAEM

3:15 PMMicrostructural Evolution of Molecular Crystals: Lei Lei1; Marisol Koslowski1; 1Purdue University

3:35 PM Break

3:55 PMMechanical Response of Pharmaceutical and Explosive Molecular Single Crystals: Kyle Ramos1; Daniel Hooks1; David Bahr2; 1Los Alamos National Laboratory; 2Washington State University

4:15 PMThermal and Elastic Mechanical Properties of Crystalline 1,3,5-Triamino-2,4,6-Trinitrobenzene (TATB): Dmitry Bedrov1; Oleg Borodin1; Grant Smith1; Thomas Sewell2; Dana Dattelbaum3; Lewis Stevens3; 1University of Utah; 2University of Missouri-Columbia; 3Los Alamos National Laboratory

4:35 PM InvitedThermodynamic Stability and Formation of Multicomponent Molecular Crystals: Chinmay Maheshwari1; Rodolfo Pinal2; Nair Rodriguez-Hornedo1; 1University of Michigan; 2Purdue University

5:05 PM InvitedAcoustic and Thermal Responses across the Brillouin Zone: Keith Nelson1; 1Department of Chemistry, MIT

Three-Dimensional Materials Science VI: Novel Tools for 3D Data Acquisition and Analysis - Part IISponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, ASM-MSCTS: Texture and Anisotropy Committee, TMS/ASM: Phase Transformations CommitteeProgram Organizers: Alexis Lewis, Naval Research Laboratory; Anthony Rollett, Carnegie Mellon University; David Rowenhorst, Naval Research Lab; Jeff Simmons, AFRL; Stuart Wright, EDAX Inc-TSL


Session Chairs: George Spanos, U S Naval Research Laboratory; Nik Chawla, Arizona State University

2:00 PM InvitedX-Ray Synchrotron Tomography for Three Dimensional (3D) Microstructure Visualization and Modeling of Deformation in Metal Matrix Composites: Jason Williams1; Anna Tosas1; Zeke Flom1; Nik Chawla1; Francesco de Carlo2; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering; 2Argonne National Laboratory/Advanced Photon Source

2:30 PMOrientation Determination by Laue Diffractometry in a Robomet.3D System: Abhijeet Budruk1; Clayton Stein1; Marc De Graef1; 1Carnegie Mellon Unversity

2:50 PMUtilizing the New Femtosecond Laser Tomographic Sectioning Technique: Reconstruction and Analysis of Low Volume Fraction Titanium Nitride Particles: McLean Echlin1; Naji Husseini1; John Nees1; Tresa Pollock1; 1University of Michigan

3:10 PMThree-Dimensional (3D) Visualization and Modeling of Reflow Porosity in Pb-Free Solder Joints by Lab-Scale X-Ray Tomography: Ling Jiang1; Martha Dudek1; Jason Williams1; Nik Chawla1; Luke Hunter2; S.H. Lau2; 1Arizona State University, School of Mechanical, Aerospace, Chemical, and Materials Engineering; 2XRadia

3:30 PM Break


124

Technical Program

Wed

. PM

4:00 PMDirect Three Dimensional Characterization of Microstructures in a/ß- and ß-Ti Alloys: Robert Williams1; Daniel Huber1; John Sosa1; Santhosh Koduri1; Vikas Dixit1; Peter Collins1; Srinivasan Rajagopalan1; Hamish Fraser1; 1The Ohio State University

4:20 PM3D Characterization, Analysis, and Modeling Tools: George Spanos1; Andrew Geltmacher1; 1Naval Research Laboratory

4:40 PMD3D Design Research Tools: Greg Olson1; 1Northwestern University

Ultrafine Grained Materials – Sixth International Symposium: Applications and TransitionsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Nanomechanical Materials Behavior Committee, TMS: Shaping and Forming CommitteeProgram Organizers: Suveen Mathaudhu, U.S. Army Research Laboratory; Mathias Goeken, University Erlangen--Nürnberg; Terence Langdon, University of Southern California; Terry Lowe, Manhattan Scientifics, Inc.; S. Semiatin, Air Force Research Laboratory; Nobuhiro Tsuji, Kyoto University; Yonghao Zhao, University of California - Davis; Yuntian Zhu, North Carolina State University


Session Chairs: Suveen Mathaudhu, U.S. Army Research Laboratory; Yuntian Zhu, North Carolina State University; Terry Lowe, Manhattan Scientific; Judson Marte, GE Global Research

2:00 PM Awards Presentation

2:10 PM Panel Discussion

2:30 PM InvitedCan SPD Techniques Provide Bulk Ultrafine Grained Functional Materials?: Michael Zehetbauer1; 1University of Vienna

2:50 PMCorrosion and Mechanical Properties of a Steel Processed by SMAT in Contrast to Its Coarse Grained Counterpart: Indranil Roy1; Christian Wilkinson1; Rashmi Bhavsar1; Jian Lu2; Yuntian Zhu3; Farghalli Mohamed4; 1Schlumberger; 2The Hong Kong Polytechnic University; 3North Carolina State University; 4University of California, Irvine

3:05 PMEutectic Structure from an Amorphous Al2O3-ZrO2-Y2O3 System by Rapid-Quenching Technique for Potential Hybrid Solar Cell Application: Young-Hwan Han1; Jondo Yun2; Yohei Harada3; Taro Makino3; Kwang-Ho Kim1; Sehun Kwon1; Kazuyuki Kakegawa3; 1Pusan National University; 2Kyungnam University; 3Chiba University

3:20 PM InvitedRecycling of Titanium Machining Chips by Severe Plastic Deformation Consolidation: P. Luo1; H. Xie1; M. Paladugu2; S. Palanisamy2; M. S. Dargusch2; K. Xia1; 1University of Melbourne; 2University of Queensland

3:40 PMProcessing of High Temperature Shape Memory Alloy Ni33.7Ti50.3Pd16 via Equal Channel Angular Extrusion: Mohammed Haouaoui1; Benat Kockar2; Kadri C. Atli1; Ji Ma1; Ibrahim Karaman1; 1Texas A&M University; 2Hacettepe University

3:55 PMEnabling Near-Net Shaped Forging of Titanium Aerospace Components by Severe Plastic Deformation: Judson Marte1; Robin Forbes Jones2; 1GE Global Research; 2ATI Allvac

4:10 PM Break

4:25 PM InvitedImproved Recrystallized Microstructures in Nb and Ta: K. Ted Hartwig1; Shreyas Balachandran1; Suveen Mathaudhu2; 1Texas A&M University; 2U.S. Army Research Laboratory

4:45 PMDeformation Processing of Nanostructured Alloys and Their Application in the Production of Hollow Structures: Radik Mulyukov1; Oleg Valiakhmetov1; Rafail Galeev1; Rinat Safiullin1; Aleksey Kruglov1; Renat Imayev1; Ayrat Nazarov1; Victor Ivan’ko2; 1Institute for Metals Superplasticity Problems, Russian Academy of Sciences; 2CJSC “INNOTEKHPROM”

5:00 PMDesign and Realization of High Strength and High Ductility Metallic Nanomaterials: Jian Lu1; Ai Ying Chen1; Hoi Lam Chan1; Hong Ning Kou1; Lin Li Zhu1; Hai Hui Ruan1; Ka Po Cheung1; 1The Hong Kong Polytech University

5:15 PM InvitedPotential of Severe Plastic Deformation for Producing Bioimplant Materials: Yuri Estrin1; 1Monash University

5:35 PMConcluding Comments

125

Technical Program

Th

ur.

AM

2010 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications: Mechanical Properties of NanomaterialsSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Nanomaterials CommitteeProgram Organizers: David Stollberg, Georgia Tech Research Institute; Nitin Chopra, University of Alabama; Jiyoung Kim, University of Texas - Dallas; Seong Jin Koh, University of Texas at Arlington; Navin Manjooran, Siemens Corporation; Ben Poquette, Keystone Materials; Jud Ready, Georgia Tech

Thursday AM Room: 214February 18, 2010 Location: Washington State Convention Center

Session Chairs: Gregory Thompson, University of Alabama; David Stollberg, Georgia Tech Research Institute


8:35 AMSubstrate Effect on the Young’s Modulus Measurement of TiO2 Nanoribbons by Nanoindentation: Xiaoxia Wu1; Terry T. Xu1; 1University of North Carolina Charlotte

8:55 AMCommercializing Unique Molecular-Scale Surface and Interfacial Coatings: Eric Bruner1; 1Aculon, Inc.

9:15 AMFracture Behavior of Co-Rich Nanocrystalline Soft Magnetic Ribbons: Maria Daniil1; Paul Ohodnicki2; Michael McHenry2; Matthew Willard1; 1Naval Research Laboratory; 2Carnegie Mellon University

9:35 AMDuctility of Bulk Nanostructured Materials: Yonghao Zhao1; Yuntian Zhu2; Enrique Lavernia1; 1University of California-Davis; 2North Carolina State University

9:55 AMEvaluation of Fracture Toughness of Carbon Nanotube Reinforced Nano-Aluminum Oxide Via Fractal Approach: Abhishek Rishabh1; Kantesh Balani1; 1Indian Institute of Technology Kanpur

10:15 AM Break

10:30 AMWarm Sever Plastic Deformation to Form Nanostructured Surface Layer in IF Steels: Mohammad Nasirizadeh1; Kamran Dehghani1; 1Amirkabir University

10:50 AMBulk Functional Materials Obtained by Shock Waves Compaction of Ultrafine Al and Ti: Nikoloz Chikhradze1; Constantin Politis1; Mikheil Chikhradze1; Akaki Gigineishvili1; George Oniashvili1; 1Mining Institute/Georgian Technical University

11:10 AMCorrosion Rates and Mechanical Properties of Nanocrystalline Materials in Contrast to their Coarse Grained Counterparts: Indranil Roy1; Shehreen Dheda2; Manuel Marya1; Farghalli Mohamed2; 1Schlumberger; 2University of California, Irvine

11:30 AMStructural Properties of Nanostructured Fe-Co-V Prepared by Mechanical Alloying and Spark Plasma Sintering: Baolong Zheng1; Randy Dumas1; Asit Biswas2; Yizhang Zhou1; Kai Liu1; Dean Baker2; Enrique Lavernia1; 1University of California, Davis; 2Advanced Powder Solutions, Inc.

11:50 AMReticulated Vitreous Carbon Foam Saturated with SiO2 Aerogel for Heat Insulation Purposes: Liping Shi1; Yesheng Zhong1; Xiao dong He1; Jia Yu1; 1Harbin Institute of Technology


Advanced Materials and Fuels Enabling Future Fusion, Fission and Hybrid Reactor Systems: Hybrid Fission FuelsSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Nuclear Materials CommitteeProgram Organizers: Joseph Farmer, Lawrence Livermore National Laboratory; Thomas M. Anklam, Lawrence Livermore National Laboratory; Magdalena Serrano de Caro, Lawrence Livermore National Laboratory

Thursday AM Room: 3AFebruary 18, 2010 Location: Washington State Convention Center

Session Chairs: Magdalena Serrano de Caro, Lawrence Livermore National Laboratory; Joseph Farmer, Lawerence Livermore National Laboratory


8:35 AM InvitedGrain Boundary Structure Effects on Radiation Assisted Segregation and Damage: Zhe Leng1; David Field1; 1Washington State University

9:05 AMMaterials Behavior under Extreme Conditions: An Aspect from Ab Initio Calculations: Fei Gao1; H.Y. Xiao1; W.J. Weber1; 1Pacific Northwest National Laboratory

9:35 AMInteratomic Forces in Stainless Steels: Graeme Ackland1; Derek Hepburn1; 1University of Edinburgh

9:55 AM InvitedThermo-Mechanical Response of a TRISO Fuel Particle in a Fusion/Fission Engine for Incineration of Weapons Grade Plutonium: Magdalena Serrano de Caro1; P. DeMange1; J. Marian1; A. Caro1; 1Lawrence Livermore National Laboratory

10:25 AMThe Evolution and Thermal Recovery of Irradiation Effects in Silicon Carbide: William J. Weber1; F. Gao1; R. Devanathan1; Y. Zhang1; W. Jiang1; 1Pacific Northwest National Laboratory

10:45 AM Break

10:55 AM InvitedThe Synthesis and Sintering of Advanced Fuels: Brian Jaques1; Daniel Osterberg1; Richard Reavis1; A. S. Hamdy1; Brian Marx1; Darryl Butt1; 1Boise State University

11:25 AMDevelopment of a Continuous CVD Process for TRISO Coating of AGR Fuel: Clay Richardson1; 1Babcock and Wilcox

11:45 AMInteraction of the Fission Product Pd with TRISO Fuel Coatings: Yufeng Zhang1; D. Hanks1; S. Krause1; G. Gajjala1; T. Hofmann1; L. Weinhardt1; M. Bär1; C. Heske1; 1Department of Chemistry, University of Nevada, Las Vegas

12:05 PM InvitedZrC Surface Cleaning and Interaction with the Fission Product Ru: Stefan Krause1; D. Hanks1; Y. Zhang1; C. Heske1; 1Department of Chemistry, University of Nevada, Las Vegas



126

Technical Program

Th

ur.

AM

Alumina and Bauxite: Alumina PrecipitationSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Carlos Suarez, Hatch Associates Inc; Everett Phillips, Nalco Company


Session Chair: Patrick James, Alumina Partners of Jamaica - Alpart


8:40 AMStudy on the Precipitation Kinetics for Improving the Quality of Alumina with Regard to Fines and Attrition Properties: Narasimharaghavan Krishnaswamy1; Nand Kumar Kshatriya1; Supratim Dasgupta1; Ramaswamy Jagannathan1; 1Bharat Aluminium Co. Ltd., (A Unit of Vedanta Resources Plc.), BALCO Nagar, Korba

9:10 AMWet Oxidation of Bayer Liquor Organics: Reaction Mechanisms: Jackie Dong1; James Tardio1; Joanne Loh2; Greg Power2; Chris Vernon2; Suresh Bhargava1; 1RMIT University; 2CSIRO Minerals

9:40 AM Break

10:00 AMThe Roles of Adsorption in Hydrate Precipitation: Joanne Loh1; Greta Brodie1; Fatima Naim1; 1Parker Centre/CSIRO Light Metals Flagship (CSIRO Minerals)

10:30 AMThe Microstructure of Aluminum Hydroxide Powders: Yu Haiyan1; Li Wen-cheng1; Bi Shiwen1; 1Northeastern University

Aluminum Reduction Technology: Hall-Héroult Cell: Raw Materials and Process ControlSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Charles Mark Read, Bechtel Corporation; Gilles Dufour, Aluminerie de Deschambault


Session Chair: Charles Mark Read, Bechtel Corporation


8:35 AMRapid, Non-Destructive Analysis of % Gibbsite in Smelting Grade Alumina: Kerrick Dando1; Neal Dando2; 1Juniata College; 2Alcoa

9:00 AMAlumina Dissolution Rate as Impacted by Ore Pre-Treatments: Xiangwen Wang1; Jack Sorensen1; Neal Dando1; Weizong Xu2; 1Alcoa, Inc.

9:25 AMProcessing of Anode Cover Material: Ingo Eick1; Bruno Rausch1; Juraj Chmelar2; Ulrich Kohaupt3; 1Hydro Aluminium Deutschland GmbH; 2Hydro Aluminium Metal; 3Steinert Elektromagnetbau GmbH

9:50 AMStatistical Investigation and Modeling of Bath Level in Hall-Héroult Cells: Jayson Tessier1; Patrice Doiron1; 1Alcoa Deschambault

10:15 AM Break

10:25 AMIn Situ Raman Experimental Study of Ionic Species in Cryolite Melts of Various Composition: Sergey Vassiliev1; Veronika Laurinavichute1; Zoya Kuz’minova1; Galina Tsirlina1; Evgeny Antipov1; Alexander Gusev2; Dmitry Simakov2; 1Laboratory for Basic Research in Aluminium Production, M.V.Lomonosov Moscow State University; 2RUSAL

10:50 AMIn Situ Cell Control: Michael Schneller1; 1Consultant

11:15 AMDetermination of Cryolite Ratio of Aluminum Electrolytes: Bingliang Gao1; Dan Li1; Zhongning Shi1; Zhaowen Wang1; Bijun Ren2; 1Northeastern University, China; 2Yichuan Power GroupHead Corporation


Aluminum Rolling: Session ISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizer: Kai Karhausen, Hydro Aluminium Deutschland GmbH


Session Chairs: Kai Karhausen, Hydro Aluminium; Gary Parker, Wise Alloys, LLC


8:35 AMIntegrated through Process Modeling Using a Virtual Platform for Materials Processing by the Example of a Multi-Pass Rolling Process: Thomas Henke1; Markus Bambach1; Gerhard Hirt1; 1RWTH Aachen University

8:55 AMAluminium Rolling Simulations Considering Interstep Annealing: Volker Mohles1; 1RWTH Aachen University

9:15 AMGrain Interactions and Dislocation Density Evolution during Channel Die Compression of Aluminum: Alankar Alankar1; Ioannis Mastorakos1; David Field1; 1Washington State University

9:35 AMImpact of Solute State and Precipitations on the Properties of 8xxx Alloys after Cold Rolling and Recrystallization: Galyna Laptyeva1; Carmen Schäfer2; Kai F. Karhausen1; Volker Mohles2; Günter Gottstein2; 1Hydro Aluminium Deutschland GmbH, R&D; 2Institute of Physical Metallurgy and Metal Physics-RWTH Aachen

9:55 AM Panel Discussion

10:25 AM Break

10:40 AMInspection Systems and Data Warehousing of Informaton: David Pond1; 1Automation and Control Technology Inc.

11:00 AMExpert5i - Intelligent Software Solution for Yield Optimization along the Production Line of Aluminium Flat Rolled Products: Sigrid Hillebrand1; Uwe Knaak1; Reinhard Rinn1; 1ISRA PARSYTEC GmbH

11:20 AMPossibilities of Laser Meaurement for Aluminum Processing: Patrick Sonntag1; 1Nokra GmbH

11:40 AM Panel Discussion

127

Technical Program

Th

ur.

AM

Biological Materials Science: Computational Materials ScienceSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Biomaterials Committee, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: John Nychka, University of Alberta; Jamie Kruzic, Oregon State University; Mehmet Sarikaya, University of Washington; Amit Bandyopadhyay, Washington State University


Session Chairs: Nima Rahbar, University of Massachusetts Dartmouth; Devesh Misra, University of Louisiana

8:30 AM InvitedMolecular Bioassemblies as Mechanical Systems: Richard LeSar1; 1Iowa State University

9:00 AM InvitedOptimized Design of Porous Titanium for Bio-Medical Applications: Alex Turner1; Nikolas Hrabe1; Rajendra Bordia1; 1University of Washington

9:30 AMNumerical Analysis of Tesselated Shark Cartilage in Bending: Xiaoxi Liu1; Mason Dean1; Adam Summers1; James Earthman1; 1University of California, Irvine

9:50 AMBinding and Assembly of Material-Specific Peptides on Solid Substrates by Atomic Force Microscopy: Christopher So1; Megan Noyes2; Ersin Oren1; Hakim Meskine3; Hilal Yazici4; Paul Mulheran3; Candan Tamerler4; John Evans5; Mehmet Sarikaya1; 1University of Washington; 2University of Michigan; 3University of Strathclyde; 4Istanbul Technical University; 5New York University

Bulk Metallic Glasses VII: Mechanical and Other PropertiesSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials CommitteeProgram Organizers: Peter Liaw, The University of Tennessee; Hahn Choo, The University of Tennessee; Yanfei Gao, The University of Tennessee; Gongyao Wang, University of Tennessee


Session Chairs: Yanfei Gao, The University of Tennessee; Y. Yokoyama, Institute for Materials Research

8:30 AM InvitedIndentation Creep Behavior of Amorphous Selenium and Amorphous Alloys near the Glass Transition Temperature: Yanfei Gao1; Caijun Su1; George Pharr1; 1University of Tennessee

8:50 AMCrystallization Mechanism in Amorphous Cu-Zr System: Ilkay Kalay1; Eren Kalay1; Matthew Kramer1; Ralph Napolitano1; 1Iowa State University / Ames Laboratory

9:00 AM InvitedTensile Ductility in Metalic Glass: Z.F. Zhang1; F.F. Wu1; Scott Mao2; 1Shenyang National Laboratory for Materials Science, Institute of Metal Research; 2University of Pittsburgh

9:20 AMCrystal Formation at Unusually Low Temperatures: Joachim Bokeloh1; Nancy Boucharat2; Harald Roesner1; Gerhard Wilde1; 1University of Muenster; 2Research Center Karlsruhe

9:30 AM InvitedEvolution of Shear Bands in Bulk Metallic Glass Composite: G. Chen1; J. L. Cheng1; H. Bei2; C. T. Liu2; 1Nanjing University of Science and Technology; 2Oak Ridge National Laboratory

9:50 AMDeformation Mechanisms in Amorphous-Crystalline Nanocomposites: Yvonne Ritter1; Karsten Albe1; 1Technische Universitaet Darmstadt

10:00 AM Break

10:10 AM InvitedDissimilar Mechanical Properties between Various Families of Bulk Metallic Glasses: Maria D Baró1; Jordina Fornell1; Santiago Suriñach1; Weihuo Li2; Annett Gebert3; Jordi Sort1; 1Universitat Autònoma de Barcelona; 2Anhui University of Technology; 3IFW Dresden

10:30 AMSubmicron Scale Measurement of Residual-Stress Profiles in Amorphous Materials by the FIB Incremental Slitting Technique: Bartlomiej Winiarski1; Ali Gholinia1; Jiawan Tian2; Yoshihiko Yokoyama3; Peter Liaw2; Philip Withers1; 1University of Manchester; 2The University of Tennessee; 3Himeji Institute of Technology

10:40 AMHeating-Rate-Dependent Crystallization Behavior of a Zr-Based Bulk Metallic Glass: Hongqing Sun1; Katharine Flores1; 1The Ohio State University

10:50 AMInfluence of Minor Aluminum Concentration Changes in Zirconium-Based Bulk Metallic Glasses on the Elastic, Anelastic, and Plastic Properties: Arnaud Caron1; Rainer Wunderlich1; Dmitri Louzguine-Luzgin2; Guoqiang Xie2; Akihisa Inoue2; Hans-Jörg Fecht1; 1Institute of Micro- and Nanomaterials, University Ulm; 2WPI Advanced Institute for Materials Research, Tohoku University

11:00 AMLength Scale Effects on Deformation in a Zr-Based Bulk Metallic Glass: Ashwini Bharathula1; 1The Ohio State University

11:10 AMEffects of Ion-Implantation on Surface Properties and Bioactivity of a Nickel-Free Zr-Based Bulk Metallic Glass: Lu Huang1; Wei He1; Claudiu Muntele2; Yoshihiko Yokoyama3; Harry Meyer4; Daryush Ila2; Akihisa Inoue3; Tao Zhang5; Peter Liaw1; 1University of Tennessee, Knoxville; 2Alabama A&M University; 3Tohoku University; 4Oak Ridge National Laboratory; 5Beijing University of Aeronautics and Astronautics

Cast Shop for Aluminum Production: Melt Oxidation, Inclusions and HydrogenSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Aluminum Processing CommitteeProgram Organizers: John Grandfield, Grandfield Technology Pty Ltd; Pierre Le Brun, Alcan Voreppe Research Center


Session Chair: Richard Chandler, Altek-MDY

8:30 AMFormation of the Solid Layer on the Top of Molten Aluminum: Lucas Nana Wiredu Damoah1; Lifeng Zhang2; 1University of Ghana; 2Missouri University of Science and Technology

8:55 AMRemoval of Solid Inclusions from Molten Aluminium through Ceramic Foam Filtration: Alma Engelbrecht1; 1Hycast AS


128

Technical Program

Th

ur.

AM

9:20 AMStrategies to Reduce Inclusion Input during Liquid Metal Transportation and Melt Distribution while DC Casting of Al Alloys: Bernd Prillhofer1; Holm Böttcher1; Helmut Antrekowitsch2; 1AMAG Casting GmbH; 2University of Leoben

9:45 AM Break

10:05 AMA New Multi Stage System of Filtration Employing a Cyclone: John Courtenay1; Frank Reusch2; 1MQP Limited; 2Drache Umwelttechnik GmbH

10:30 AMHazards Associated with the Use of Bone Ash in Contact with Molten Aluminum: Don Doutre1; 1Novelis Global Technology Centre

10:55 AMIn-Situ Measurement of Dissolved Hydrogen during Low Pressure Die Casting of Aluminium: Matthew Hills1; Mark Henson1; Chris Thompson1; Barnett Geddes2; Carsten Schwandt3; R Kumar3; Derek Fray3; 1EMC Limited; 2Foseco; 3University of Cambridge

11:20 AMHycast SIR- A Unique Concept for Inline Melt Refining: Idar Steen1; Erling Myrbostad1; Terje Haugen1; Arild Håkonsen1; 1Hycast

Characterization of Minerals, Metals and Materials: Characterization of Micro-, Nano-, and Thin FilmsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Ann Hagni, Ann Hagni Consulting, LLC; Toru Okabe, The University of Tokyo


8:35 AM4-D Microstructural Characterization of Snow and Ice: I. Baker1; R. Obbard1; S. Chen1; R. Lomonaco1; K. Aho1; G. Troderman1; T. Cassano1; 1Dartmouth College

9:00 AMCharacterization of Elastic and Mechanical Properties of Materials by Atomic Force Acoustic Microscopy: Arnaud Caron1; Shanker Ram2; Siddhartha Das3; Hans-Jörg Fecht3; 1Institute of Micro- and Nanomaterials, University Ulm; 2Materials Science Center, Indian Institute of Technology, Kharagpur; 3Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur

9:25 AMNanoindentation Analysis as a Two-Dimensional Tool for Mapping the Mechanical Properties of Complex Microstructures: Nicholas Randall1; 1CSM Instruments

9:50 AMCharacterization of Nanocrystalline CdS:In Thin Films Prepared by the Spray-Pyrolysis Technique: Shadia Ikhmayies1; Riyad Ahmad-Bitar1; 1University of Jordan

10:15 AMCharacterization of Nanoscale γ’ Precipitates in Ni-Base Superalloys: Gopal Viswanathan1; R. Srinivasan1; J. Tiley2; Soumya Nag3; R. Banerjee3; Hamish Fraser1; 1The Ohio State University; 2Air Force Research Laboratory; 3University of North Texas

10:40 AMChemical Co-Deposited PbS – CuS Thin Film Characterization: Effect of Annealing: Mishark Nnabuchi1; Chinedu Ekuma2; Israel Owate2; 1Ebonyi State University; 2University of Port Harcourt

11:05 AMNanosecond Electrical Discharges between Semiconducting Sulfide Mineral Particles in Water: Igor Bunin1; Valentine Chanturiya1; 1Research Institute of Comprehensive Exploitation of Mineral Resources RAS

11:30 AMQuantitative Measurement of Volumes for Nanoparticles by High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy: Helge Heinrich1; Biao Yuan1; 1University of Central Florida



Characterization of Minerals, Metals and Materials: Characterization of Refractories, Clays, Concrete, Interfaces, and ThermodynamicsSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Structural Materials Division, TMS/ASM: Composite Materials Committee, TMS: Materials Characterization CommitteeProgram Organizers: Ann Hagni, Geoscience Consultant; Sergio Monteiro, State University of the Northern Rio de Janeiro - UENF; Jiann-Yang Hwang, Michigan Technological University


Session Chairs: Jiann-Yang Hwang, Michigan Technological University; Takashi Nagai, The University of Tokyo


8:35 AMEffect of Cold Working on the Thermal Expansion and Mechanical Properties of Fe-29%Ni-17%Co Low Thermal Expansion Alloy: Song-Yi Kim1; Jung Namgung2; Mun-Chul Kim2; Kee-Ahn Lee3; 1Center for Advanced Green Materials Technology, Andong National University; 2RIST; 3Department of Advanced Material Science and Engineering, Andong National University

8:55 AMThermodynamic Measurement of Phosphorus Oxide in Oxide Systems by Double Knudsen Cell Mass Spectrometry: Takashi Nagai1; Masafumi Maeda1; 1The University of Tokyo

9:15 AMCharacterization of Refractories in Gasification Systems Using Post Mortem Analysis and Thermodynamics: Kyei-Sing Kwong1; James Bennett1; Rick Krabbe1; Hugh Thomas1; 1NETL

9:35 AMThe Reception of Ceramic Aluminum Silicate Refractories: Sereda Borys1; Irina Krugljak1; Alexandr Zherebtsov1; 1ZSEA

9:55 AMUtilization of Aluminum Slag for the Expansion of Lightweight Concrete: Xuan Li1; Jiann-Yang Hwang2; Hee-Joon Jeon2; Matthew Andriese2; Zheng Zhang2; 1University of Science and Technology Beijing; 2Michigan Technological University

10:15 AMCharacterization of Vitrified Tile Bodies with Kaolinitic Clay and Nepheline-Syenite: Carlos Maurício Vieira1; Sergio Monteiro1; 1State University of the North Fluminense

10:35 AMSystematic Study of Bentonitic Clay and Quaternary Ammonium Salts: Renata Barbosa1; Dayanne Souza1; Karine Nóbrega1; Edcleide Araújo1; Tomás Mélo1; 1UFCG

129

Technical Program

Th

ur.

AM

10:55 AMTechnological Characterization of Serpentinite Rock from Andorinha (Bahia/Brazil): Aline Maria Teixeira1; João Sampaio2; Francisco Garrido3; Marta Medeiros3; 1IQ/UFRJ - CETEM; 2CETEM; 3IQ/UFRJ

11:15 AMProperties and Durability of Ready Mix Repair Mortars in Hot Environment: Benchaa Benabed1; 1University of Laghouat


11:40 AM Question and Answer Period

Electrode Technology for Aluminum Production: Preheating and Operational AspectsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum CommitteeProgram Organizers: Ketil Rye, Alcoa Mosjøen; Morten Sorlie, Alcoa Norway; Barry Sadler, Net Carbon Consulting Pty Ltd


Session Chair: Paulo Douglas Vasconcelos, Albras Alumínio Brasileiro S.A


8:35 AMLoss in Cathode Life Resulting from the Shutdown and Restart of Potlines at Aluminum Smelters: Alton Tabereaux1; 1Consultant

8:55 AMInvestigation of the Impact of Pre-Heating, Start-Up and Early Operation on Potlife: Jayson Tessier1; Carl Duchesne1; Gary Tarcy2; Claude Gauthier2; Gilles Dufour2; 1Laval University; 2Alcoa Inc

9:15 AMEvaluation of Mothballing and Subsequent Restarting of Søderberg Cells: V.Yu. Buzunov1; V. I. Borisov1; Ye.G. Masyutin1; D.G. Bolshakov1; A.A. Pinayev1; 1RUS-Engineering Ltd.

9:35 AMAnalysis of the Coke Bed Preheating Method for Aluminium Cells: Mohamed Ali1; 1The Aluminium Company of Egypt

9:55 AMThe Combined Flame and Aluminum Preheating Method: Tian Yingfu1; Feng Naixiang2; Peng Jianping2; Wang Yaoyu2; Li Jian3; 1Chongqing Tiantai Aluminum Industry Co., Ltd.; 2Northeastern University; 3Jianwenyuan Industrial Equipment Company

10:15 AM Break

10:30 AMCell Preheat on Full Line Current at Dubal: Ali Al Zarouni1; Maryam Al Jallaf1; Arvind Kumar1; K. Alaswad1; J. Blasques1; 1DUBAL

10:50 AMOptimization of the Anode-Stub Contact: Material Properties of Cast Iron: Bjarte Oye1; Elin Haugland2; Jorund Hop2; Arne Nordmark1; Morten Onsoien1; 1SINTEF; 2Hydro Aluminium

11:10 AMVoltage Drop, Stub-Anode Connection, Cast Iron: Adel Nofal Adel Nofal1; Mohamed Waly1; Ahmed Ahmed1; Mahmoud Agour1; Amr Kandil1; Shaher Mohamed1; Mohamed Mourad1; 1Aluminium Company of Egypt

General Abstracts: Electronic, Magnetic and Photonic Materials Division: Session IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS: Electronic Materials Committee, TMS: Electronic Packaging and Interconnection Materials Committee, TMS: Nanomaterials Committee, TMS: Superconducting and Magnetic Materials Committee, TMS: Thin Films and Interfaces Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Long Qing Chen, Pennsylvania State University; Sung Kang, IBM Corporation; Mark Palmer, Kettering University




8:35 AMChemical Vapor Transport Synthesis and Optical Property of Moo3 Thin Film: Young Jung Lee1; Chang Won Park1; Dae-Gun Kim1; Young Do Kim1; 1Hanyang University

8:55 AMImproved Performance of a Fluorescent Blue Organic Light Emitting Diode with Hole Blocking Materials as Dopants for Transport Layers: Girija Samal1; K. N. Narayanan Unni1; Saswat Bharat1; Deepak2; 1Samtel Color Ltd; 2Indian Institute of Technology Kanpur

9:15 AMLuminescence of the GaP:N Long-Term Ordered Single Crystals: Sergei Pyshkin1; John Ballato2; Andrea Mura3; Marco Marceddu3; 1Academy of Sciences; 2Clemson University; 3The University of Cagliari

9:35 AMOpals, Photonic Band Gap Materials, Pleochroic Refraction, and Monochromatic Lasers: Michelle Stem1; 1University of Texas at El Paso

9:55 AM Break

10:15 AMCoercivity Enhancement of Nd-Fe-B Sintered Magnets by Two-Step Sintering: Se Hoon Kim1; Hoon-sup Kim1; Jin Woo Kim1; Dae-Gun Kim1; Young Do Kim1; 1Hanyang University

10:35 AMStructure and Magnetic Properties of Fe-Co-Ni-Zr-B-Cu Nanocrystalline Soft Magnetic Alloys: Keith Knipling1; Maria Daniil1; Matthew Willard1; 1Naval Research Laboratory

General Abstracts: Electronic, Magnetic and Photonic Materials Division: Session IIISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS: Electronic Materials Committee, TMS: Electronic Packaging and Interconnection Materials Committee, TMS: Nanomaterials Committee, TMS: Superconducting and Magnetic Materials Committee, TMS: Thin Films and Interfaces Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Long Qing Chen, Pennsylvania State University; Sung Kang, IBM Corporation; Mark Palmer, Kettering University





130

Technical Program

Th

ur.

AM

8:35 AMA Subatomic Particle Electromagnetic Wave Solution In A Simplified Space/Time Environment: John Elton1; James Cornwell1; 1Protective Systems, Inc.

8:55 AMEffect of Electroplating Bath Temperature on Sn Surface Morphology: Uttara Sahaym1; Stephanie Miller2; M. Norton1; 1Washington State University; 2University of Illinois

9:15 AMIntroduction of Digital Field Control System in Skelp Mill, DSP: Tapas Kanti Dutta1; Goutam Majumder2; Suresh Sarkar2; Nilay Gupta2; Shaktiveer Singh1; 1RDCIS, SAIL; 2Durgapur Steel Plant, SAIL

9:35 AMThe Photophysics of a Luminescent Ruthenium Polypyridyl Complex with Pendant β-Cylodextrin; pH Modulation of Lifetime and Photoinduced Electron Transfer: Muath Atmeh1; 1National University of Ireland

9:55 AMMaterials and Manufacturing Challenges in Hybrid Flexible Electronics: Khershed Cooper1; 1NRL

10:15 AM Break

10:35 AMAn Experimental Setup and Procedure for Thermal Resistance Measurements of a Thermal Interface Material: Kaustubh Kalkundri1; Frank Andros1; Bahgat Sammakia1; 1SUNY at Binghamton

10:55 AMEffect of Isothermal Aging and Thermal Cycling on Interfacial IMC Growth and Fracture Behavior of SnAgCu/Cu Joints: Xiaoyan Li1; 1Beijing University of Technology

11:15 AMMagnetic Properties of New Diluted Ferromagnetic Semiconductors Pb1-

x-yMgxCryTe: Elena Zvereva1; Olga Savelieva1; Sergey Ibragimov1; Evgeny Slyn’ko2; Vasily Slyn’ko2; 1Moscow State University; 2Institute of Material Science Problems

11:35 AMStructure and Properties of Metamagnetic Functional Alloys Ni-Mn-In: Pnina Ari-Gur1; Michael Morris1; Gregory Huizenga1; Victor Koledov2; Vladimir Shavrov2; Vladimir Zolotorev2; Alexander Kamantsev2; Vladimir Khovailo2; Fernando M. Araujo-Moreira3; Oscar F. de Lima4; 1Western Michigan University; 2Kotelnikov’ Institute of Redioengineering and Electronics of RAS (Moscow); 3Universidade Federal de São Carlos (Brazil); 4Universidade Estadual de Campinas (Brazil)

General Abstracts: Light Metals Division: Session IIISponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Aluminum Committee, TMS: Magnesium Committee, TMS: Recycling and Environmental Technologies Committee, TMS: Energy Committee, TMS: Aluminum Processing CommitteeProgram Organizers: Alan Luo, General Motors Corporation; Eric Nyberg, Pacific Northwest National Laboratory


Session Chair: Alan Luo, General Motors Research and Development Center

8:30 AMMultistage Fatigue Modeling for Three Wrought Al Alloys: Yibin Xue1; 1Utah State University

8:50 AMOptimised Fatigue Behaviour of Ti-6Al-4V Alloy Components Fabricated by MIM: Orley Ferri1; Thomas Ebel1; Rüdiger Bormann1; 1GKSS - Reasearch Centre

9:10 AMStructural Analysis of Hot Blow Formed Aluminum Center Pillar with Residual Stress Consideration: Dongok Kim1; Jinpyeong Kim1; Yongmun RYU1; 1KATECH

9:30 AMThermo-Mechanical Characterization of Al-Cu-Mg Composites Reinforced with Diboride Particles: Natalia Cortes1; Pilar Barrado1; Sergio De Hoyos1; Hermes Calderón1; Oscar Suárez1; 1University of Puerto Rico-Mayaguez

9:50 AMUpgrade and Electrochemical Reduction of TiO2-Rich Slag to Titanium: Qian Xu1; Ling Sun1; Qiu-Shi Song1; Wei Xing1; Ji-Hong Du2; Zheng-Ping Xi2; 1Northeastern University; 2Northwest Institute for Non-Ferrous Metal Research

10:10 AM Break

10:30 AMWear Behaviour of the Newly Developed Biomedical Beta Titanium Alloy (Ti-23Nb-0.7Ta-2Zr-1O): Sathish Sathyavageeswaran1; M. Venkatesh1; Geetha Manivasagam1; Asokamani Rajamanickam1; T.K. Nandy2; 1VIT University; 2Defence Metallurgical Research Laboratory

10:50 AMFriction Stir Spot Welding of Magnesium Alloys: Qi Yang1; Xiang Li1; Ke Chen1; 1Hitachi America, Ltd.

11:10 AMStudy on the Materials of Rolled Al-Mg-Si Alloy Used for the High-Speed Trains: Kai Ji1; Guangchun Yao1; Yongliang Mu1; Guoyin Zu1; 1School of Materials & Metallurgy, Northeastern University

11:30 AMThermodynamic Design of Ultra-Strong Titanium Alloys Undergoing Plasticity Induced Martensitic Transformations: Suresh Neelakantan1; Pedro Rivera-Diaz-del-Castillo2; Sybrand van der Zwaag2; 1Materials Innovation Institute/Delft University of Technology; 2Delft University of Technology

General Abstracts: Materials Processing and Manufacturing Division: Forming and MachiningSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Global Innovations Committee, TMS: Nanomechanical Materials Behavior Committee, TMS/ASM: Phase Transformations Committee, TMS: Powder Materials Committee, TMS: Process Technology and Modeling Committee, TMS: Shaping and Forming Committee, TMS: Solidification Committee, TMS: Surface Engineering CommitteeProgram Organizers: Thomas Bieler, Michigan State University; Corbett Battaile, Sandia National Laboratories



8:30 AMEffect of AWJ Machining Processes on Flexural Properties of CFRP Composites: T. Briggs1; M. Ramulu1; 1University of Washington

8:50 AMA Simple Method for Producing Large Tubular Components of Varying Profiles: Michel Guillot1; Augustin Gakwaya1; Xavier Elie-dit-Cosaque1; 1Laval University

9:10 AMA Study of Electromagnetic Compression of Thin-Walled Steel and Aluminum Tubes: Anupam Vivek1; Keun-Hwan KIM2; Glenn Daehn1; 1Ohio State University; 2POSCO

131

Technical Program

Th

ur.

AM

9:30 AMTexture Control for Improving Deep Drawability of Cu Bearing New BH Steel: Kyu Hwan Oh1; Dong Nyung Lee1; Yang Mo Koo1; Se Min Park1; Sung-il Kim1; 1Graduate Institute of Ferrous Technology, Pohang University of Science and Technology

9:50 AMEdge Cracking Characterization and Analysis on Advanced Dual Phase Steels: Xin Wu1; 1Wayne State University

10:10 AMClosure of Cylindrical Voids in a Slab under Plane-Strain Compression: Jong Jin Park1; Jae Won Lee1; 1Hongik University

10:30 AM Break

10:50 AMSpringback Correction by Electromagnetic Deformation in Sheet Metal Fabrication: Jianhui Shang1; Steve Hatkevich1; Larry Wilkerson1; Jeremy Westerheide1; Allen Jones1; 1American Trim LLC

11:10 AMMicrostructure Evolution and Static Re-Crystallization Kinetics of High Manganese Steel at Hot Rolling Conditions: Hyukjin An1; Soon Gi Lee2; Jong-Kyo Choi2; Jae-Sang Lee1; Yang-Mo Koo1; 1POSTECH; 2POSCO

11:30 AMNew High Strength Ductile Bainitic Forging Steels: Christoph Keul1; Marcus Urban2; Martin Fischer1; Gerhard Hirt2; Wolfgang Bleck1; 1Institute of Ferrous Metallurgy; 2Institute of Metal Forming

11:50 AMSuperplastic Blow Forming of Steel and Titanium Alloys for Aerospace Parts: Ho-Sung Lee1; Jong-Hoon Yoon1; Yeong-Moo Lee1; 1Korea Aerospace Research Institute

12:10 PMCooling Behavior of Lead-Free Bismuth Bronze Produced through the Frozen Mold Casting Process: Shuji Tada1; Hiroyuki Nakayama1; Toshiyuki Nishio1; Keizo Kobayashi1; 1National Institute of Advanced Industrial Science and Technology

General Abstracts: Structural Materials Division: Environmental DegradationSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS: Advanced Characterization, Testing, and Simulation Committee, TMS: Alloy Phases Committee, TMS: Biomaterials Committee, TMS: Chemistry and Physics of Materials Committee, TMS/ASM: Composite Materials Committee, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: High Temperature Alloys Committee, TMS/ASM: Mechanical Behavior of Materials Committee, TMS/ASM: Nuclear Materials Committee, TMS: Refractory Metals Committee, TMS: Titanium CommitteeProgram Organizers: Eric Ott, GE Aviation; Robert Hanrahan, National Nuclear Security Administration; Judith Schneider, Mississippi State University



8:30 AMPhase Field Modeling of Sintering Process in Thermal Barrier Coating Systems: Anter El-Azab1; Jie Deng1; Karim Ahamed1; 1Florida State University

8:50 AMHigh-Temperature Cyclic Oxidation of Pd/Pt-Modified Nial Bond Coats: Raghavendra Adharapurapu1; Dan Widrevitz1; Jun Zhu1; Don Lipkin2; Voroman Dheeradhada2; Tresa Pollock1; 1University of Michigan; 2General Electric (GRC)

9:10 AMRole of TM (TM = Pd, Rh, Ir) on Stability and Oxidation Behavior of Ternary β-NiAl: Travis Brammer1; Pratik Ray1; Yi Ye2; Matthew Kramer2; Mufit Akinc1; 1Iowa State University; 2Ames Laboratory

9:30 AMInvestigation of the Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol Environments: Lindsey Goodman1; Xiaoyuan Lou1; Preet Singh1; 1Georgia Institute of Technology

9:50 AMObservation and Detection of Corrosion on Aerospace Bearing Steels in Ester Based Lubricants: Michael Hurley1; Cole Smith1; Darryl Butt1; 1Boise State University

10:10 AM Break

10:20 AMAssessment of Slag-Aided Deoxidation Process in 3.5crmov Rotor Steel: June-Seong Park1; Chang-Woo Seo1; Seonhyo Kim1; 1POSTECH

10:40 AMFactors Affecting the Environmental Assisted Cracking Behavior of 2205 Duplex Stainless Steel: Kevin Chasse1; Di Yang2; Preet M. Singh1; Richard W. Neu3; 1Georgia Institute of Technology; 2University of Colorado at Boulder; 3Georgia Institute of Technology and University of Colorado at Boulder

11:00 AMHydrogen Embrittlement of a Bainitic Wheel Steel: Ren Xuechong1; Liu Fenbin1; Su Yanjing1; Chu Wuyang1; 1University of Science and Technology Beijing

11:20 AMMicrostructural and Mechanical Aspects of High Nitrogen Steels at Cryogenic Temperature: Zurui Zhang1; Huabing Li1; Zhouhua Jiang1; Zhen Li1; 1Northeastern University

11:40 AMThe Relationship between Sliding-Wear Rate and the Microstructure of AISI 1020 Plain-Carbon Steel: Jong Chul Kim1; Jun Ki Park1; Sul Ki Yi1; Yong-Suk Kim1; 1Kookmin University

12:00 PMDynamic Tensile Extrusion Behavior of DU and U6NB: Carl Trujillo1; George Gray1; Ellen Cerreta1; Joel Montalvo1; Daniel Martinez1; 1Los Alamos National Laboratory

Jim Evans Honorary Symposium: Beyond Berkeley TimesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals DivisionProgram Organizers: Ben Li, University of Michigan; Brian G. Thomas, University of Illinois at Urbana-Champaign; Lifeng Zhang, Missouri University of Science and Technology; Fiona Doyle, University of California, Berkeley; Andrew Campbell, WorleyParsons


Session Chair: Ben Li, University of Michigan


8:40 AMContamination Issues – A Contrast in Industries: Stanley Siu1; 1S & V Siu Associates, LLC

9:05 AMElectrodynamic and Thermal Interaction of Nanoparticles in Hyperthermia Cancer Therapy and Solar Energy Systems: Ben Li1; 1University of Michigan


132

Technical Program

Th

ur.

AM

9:30 AMMetallurgical Design Issues at Cirque du Soleil: Daniel Cook1; 1University of Nevada, Las Vegas

9:55 AMAn Electrochemical Technique for Minimizing Soil and Ground Water Contamination by Heavy Metals Leached from Solid Industrial Wastes: Nilesh Shukla1; Manoj Harbola1; Kali Sanjay2; Rajiv Shekhar1; 1Indian Institute of Technology; 2Institute of Minerals & Materials Technology

10:20 AM Break

10:35 AMHall Cell MHD Instability: Recent Theoretical Analyses and Experimental Support: Donald Ziegler1; 1Alcoa Primary Metals

11:00 AMCommon Modeling Approaches in Displays: Case Studies in Organic Light Emitting Diodes and Plasma Display Panels: Deepak1; 1IIT Kanpur

11:25 AMModeling Pulsatile Blood Flow in End-to-Side Anastomoses: Daniel Cook1; Christopher Thompson2; 1University of Nevada, Las Vegas; 2General Electric

Magnesium Technology 2010: Forming and WeldingSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: Amit Ghosh, University of Michigan; Jon Carter, GM R&D

8:30 AMTest Results and FEA Predictions from Magnesium AZ31 Sheet Beams in Bending and Axial Compression: David Wagner1; Stephen Logan2; Kathy Wang3; Tim Skszek4; 1Ford Motor Company; 2Chrysler LLC; 3General Motors Corp.; 4Magna Cosma International

8:50 AMMicrostructure and Mechanical Properties of Magnesium Extrusion Alloys AM30 and AZ31: Alan Luo1; Joy Forsmark2; Xichen Sun3; Scott Shook4; W.Z. Misiolek5; Raj Mishra1; 1General Motors Corporation; 2Ford Motor Company; 3Chrysler Group LLC; 4Timminco Metals; 5Lehigh University

9:10 AMTexture Development in a Twin Roll Cast and Warm Rolled ZK60 Magnesium Alloy: Hongmei Chen1; Huashun Yu2; Suk Bong Kang3; Guanghui Min2; 1Jiangsu University of Science and Technology; 2Shandong University; 3Korea Institute of Materials Science

9:30 AMCruciform Geometries for Elevated Temperature Biaxial Testing of Mg AZ31B: Fadi Abu-Farha1; Louis Hector Jr2; 1Pennsylvania State University; 2GM R&D Center

9:50 AMCharacterization of Continuous-Cast AZ31B Magnesium Alloy Sheets and Lubricants for Warm-Forming - Friction Effects: Aashish Rohatgi1; Darrell Herling1; Eric Nyberg1; 1Pacific Northwest National Laboratory

10:10 AM Break

10:30 AMHigh Strength ZK60 Mg Plate Produced by Grain Refinement and Precipitation during Alternate Biaxial Reverse Corrugation (ABRC) Process and Friction Stir Process (FSP): Bilal Mansoor1; Sibasish Mukherjee1; Amit Ghosh1; 1University of Michigan

10:50 AMFormability of Mg Alloys at Room Temperature: D.-W. Kim1; D. H. Kang2; S. Kim3; G. T. Bae4; K. H. Kim1; Nack J. Kim1; 1POSTECH; 2McGill University; 3General Motors R&D Center; 4Georgia Institute of Technology

11:10 AMDynamic Blankholder Control for the Enhanced Forming Limit of Magnesium Sheets: Wonkyu Bang1; 1RIST

11:30 AMJoining Magnesium to Steel: Yuri Hovanski1; Glenn Grant1; Mike Santella2; 1Pacific Northwest National Laboratory; 2Oak Ridge National Laboratory

11:50 AMAccumulative Roll Bonding of Wrought Magnesium Alloy: H. Nayaka1; B.S.S. Daniel1; G.P. Chaudhari1; 1IIT Roorkee

12:10 PMMechanical Properties and Corrosion Behavior of Friction Stir Welded Mg/Mg- and Mg/Al-Joints: Otmar Klag1; Guntram Wagner1; Dietmar Eifler1; 1Institute of Materials Science and Engineering / University of Kaiserslautern

Magnesium Technology 2010: ICME II and Biomedical ApplicationsSponsored by: The Minerals, Metals and Materials Society, TMS Light Metals Division, TMS: Magnesium CommitteeProgram Organizers: Sean Agnew, University of Virginia; Eric Nyberg, Pacific Northwest National Laboratory; Wim Sillekens, TNO; Neale Neelameggham, US Magnesium LLC


Session Chairs: John Allison, Ford Motor Company; Wim Sillekens, TNO Science and Industry

8:30 AMTwo- and Three-Dimensional Cellular Automaton Models for Simulating Dendrite Morphology Evolution of Cast Magnesium Alloys: Liang Huo1; Zhiqiang Han1; Baicheng Liu1; 1Tsinghua University

8:50 AMElemental Partitioning and Microstructure of Mg-Al-Ca-Sn Quaternary Alloys: Jessica TerBush1; Olivia Chen1; J.Wayne Jones1; Tresa Pollock1; 1University of Michigan

9:10 AMNumerical Simulation of Flow-Induced Air Entrapment Defects in the High Pressure Die Casting Process: Shuai-Jun Li1; Shou-Mei Xiong1; Bai-Cheng Liu1; Mei Li2; John Allison2; 1Tsinghua University; 2Ford Motor Company

9:30 AMESPEI: Extensible, Self-Optimizing Phase Equilibrium Infrastructure for Magnesium Alloys: Shun-Li Shang1; Yi Wang1; Zi-Kui Liu1; 1MaterialsInformatics LLC

9:50 AMModeling Casting and Heat Treatment Effects on Microstructure in Super Vacuum Die Casting (SVDC) AZ91 Magnesium Alloy: Mei Li1; Ruijie Zhang1; John Allison1; 1Ford Motor Company

10:10 AMFirst-Principles Study of Ternary Hcp Solid Solution Phases from Special Quasirandom Structures: Application to Mg-Al-X Alloys: Dognwon Shin1; Christopher Wolverton1; 1Northwestern University

10:30 AM Break

10:50 AMSlip andTwinning in Mg Single Crystals: Erica Lilleodden1; Gyu Seok Kim1; Sangbong Yi1; Yuanding Huang1; Norbert Huber1; 1GKSS Research Center

133

Technical Program

Th

ur.

AM

11:10 AMAssessing and Modeling the Impact of Initial Microstructure on Dynamic Recrystallization of Sheets: Frederick Polesak1; Paul Krajewski2; Babak Raeisinia1; Sean Agnew1; 1University of Virginia; 2GM

11:30 AMModified AZ80 Magnesium Alloys for Biomedical Applications: Muge Erinc1; 1TNO

11:50 AMThe Dissolution Behavior of a Mg-Zn-Ca Alloy for Biomedical Applications: Michele Manuel1; Harpreet Brar1; 1University of Florida

12:10 PMControlling the Biodegradation Rate of Magnesium-Based Implants through Surface Nanocrystallization Induced by Cryogenic Machining: Z. Pu1; D. Puleo1; O.W. Dillon, Jr.1; I.S. Jawahir1; 1University of Kentucky

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: Batteries and OthersSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: Jeffrey Hawk, U.S. Department of Energy; Xingbo Liu, West Virginia University

8:30 AM InvitedNanostructured Functional Materials for Energy Conversion and Storage: Donghai Wang1; 1Penn State University

9:10 AMCathode/Anode Selection and Full Cell Performance for Stationary Li-Ion Battery System: Daiwon Choi1; Donghai Wang2; Vilayanur Viswanathan1; Wu Xu1; Ji-Guang Zhang1; Gary Yang1; Gordon Graff1; Jun Liu1; 1Pacific Northwest National Laboratory; 2Penn State University

9:30 AMSynthesis, Orientation and Electrochemical Properties of Nanostructured LiMPO4(M:Fe, Mn, Co) Cathode for Li-Ion Battery: Daiwon Choi1; Donghai Wang2; In-Tae Bae3; Zimin Nie1; Jie Xiao1; Wu Xu1; Ji-Guang Zhang1; Gary Z. Yang1; Gordon Graff1; Jun Liu1; 1Pacific Northwest National Laboratory; 2Penn State University; 3State University of New York at Binghamton

9:50 AM Break

10:00 AMGraphiMetal Coatings on High Thermal Conductivity Graphite Foam to Prevent “Dusting” and Facilitate Solder Joining: Ben Poquette1; Stephen Kampe2; 1Keystone Materials LLC; 2Michigan Tech

10:20 AMThe Effect of Stoichiometry and Sintering Temperature on the Thermoelectric Properties of Titanium Cobaltite: Biprodas Dutta1; Sezhian Annamalai1; Rudra Bhatta1; Ian Pegg1; 1The catholic University of America

10:40 AMSpecialized Metal Coatings Unleash the Potential of High Thermal Conductivity Graphite Foam: Ben Poquette1; Stephen Kampe2; 1Keystone Materials LLC; 2Michigan Tech

11:00 AMDevelopment of Advanced Low-Temperature Sodium Beta-Alumina Batteries: Xiaochuan Lu1; Guanguang Xia1; Kerry Meinhardt1; John Lemmon1; Vince Sprenkle1; Zhenguo Yang1; 1Pacific Northwest National Laboratory

Materials in Clean Power Systems V: Clean Coal-, Hydrogen Based-Technologies, Fuel Cells, and Materials for Energy Storage: PEM and BatteriesSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Structural Materials Division, TMS/ASM: Corrosion and Environmental Effects Committee, TMS: Energy Conversion and Storage CommitteeProgram Organizers: Xingbo Liu, West Virginia University; Zhenguo Yang, Pacific Northwest National Lab; K. Weil, Pacific Northwest National Lab; Mike Brady, Oak Ridge National Lab; Jay Whitacre, Carnegie Mellon University; Ayyakkannu Manivannan, National Energy Technology Laboratory; Zi-Kui Liu, Penn State University


Session Chairs: Jay Whitacre, Carnegie Mellon Univeristy; Guozhong Cao, University of Washington

8:30 AMAlternative Catalyst Supports Based on Metal Carbides: Susanne Opalka1; 1United Technologies Research Center

8:50 AMNanoscale Tantalum Oxide Based Catalysts for PEM Fuel Cell Applications: Jin Kim1; Tak-Keun Oh1; Yongsoon Shin1; K. Scott Weil1; 1Pacific Northwest National Laboratory

9:10 AM InvitedLithium Ion Batteries: Materials Processing and Mechanical Degradation: Claus Daniel1; Kevin Rhodes2; 1Oak Ridge National Laboratory and University of Tennessee; 2University of Tennessee

9:50 AMLow Cost Aqueous Electrolyte Based Energy Storage: Materials and Performance: Jay Whitacre1; Sangeun Chun1; Sanjeev Sharma1; Amul Tevar1; Andrew Polonsky1; 1Carnegie Mellon Univeristy

10:10 AM Break

10:20 AM InvitedSol-Gel Derived Lithium Iron Phosphate Films for Efficient Lithium-Ion Intercalation: Yanyi Liu1; Dawei Liu1; Qifeng Zhang1; Betzaida Garcia1; Guozhong Cao1; 1University of Washington

11:00 AMA New Material, Li2Mn2(MoO4)3 for Li-Ion Batteries: Synthesis and Characterization: K.M. Begam1; S.R.S. Prabaharan2; M.S. Michael3; 1Universiti Teknologi PETRONAS; 2University of Nottingham; 3SSN Engineering College

11:20 AMEffect of Co Substitution on the Structural and Electrochemical Behavior of Spinel LiMn2O4: Rahul Singhal1; Naba Karan1; Rajesh Katiyar1; Ram Katiyar1; 1University of Puerto Rico

11:40 AMMg3N2-Li-Mg Cermet Anodes for Lithium Based Batteries: Alpesh Khushalchand Shukla1; Thomas Richardson1; 1Lawrence Berkeley National Laboratory


134

Technical Program

Th

ur.

AM

Modeling, Simulation, and Theory of Nanomechanical Materials Behavior: Nanoindentation and Contact MechanicsSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering Committee, TMS: Nanomechanical Materials Behavior CommitteeProgram Organizers: Thomas Buchheit, Sandia National Laboratories; Sergey Medyanik, Washington State Univ.; Douglas Spearot, University of Arkansas; Lawerence Friedman, Penn State University; Edmund Webb, Sandia National Laboratories


Session Chairs: Dylan Morris, NIST; Lawrence Friedman, NIST

8:30 AM InvitedPlastic Deformation of Au Particles on a Sapphire Substrate: Dan Mordehai1; Eugen Rabkin1; David Srolovitz2; 1Technion - Israel Institute of Technology; 2Yeshiva University

9:00 AMEffect of Temperature on Nano-scale Asperity Contact and Separation in Au: Jun Song1; David Srolovitz2; 1Brown University; 2Yeshiva University

9:20 AMThe Strongest Contact and Size Effect in Nanoscale Metal-Metal Contact: Molecular Dynamics Simulation Study: Hojin Kim1; Alejandro Strachan1; 1Purdue University

9:40 AM InvitedFriction and Adhesion at the Nanoscale: Izabela Szlufarska1; Yifei Mo1; Yun Liu1; 1Universty of Wisconsin

10:10 AM Break

10:30 AM InvitedDislocation Nucleation, Jerky Flow and Size Effects in Nanoindentation: Wei Wang1; Yuan Zhong2; Garritt Tucker2; Ke Lu1; Lei Lu1; David McDowell2; Ting Zhu2; 1Shenyang National Laboratory for Materials Science; 2Georgia Institute of Technology

11:00 AMAssessment of the Hertzian Estimate of Plasticity-Initiating Shear Stresses during Nanoindentation: Dylan Morris1; Li Ma1; Lyle Levine1; Stefhanni Jennerjohn2; David Bahr2; 1NIST; 2Washington State University

11:20 AMAtomic-Scale Study of Nanoindentation in Iron and Copper: Yury Osetskiy1; Chansun Shin2; Roger Stoller1; 1ORNL; 2Korea Atomic Energy Research Institute

11:40 AMNanoindentation Simulations to Predict Macroscale Properties of Cement: Priscilla Fonseca1; 1Northwestern University

Neutron and X-Ray Studies of Advanced Materials III: Diffraction Analysis of AlloysSponsored by: The Minerals, Metals and Materials Society, ASM International, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Titanium CommitteeProgram Organizers: Rozaliya Barabash, Oak Ridge National Laboratory; Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center; Peter Liaw, University of Tennessee; Yandong Wang, Northeastern University


Session Chairs: Jaimie Tiley, Air Force Research Laboratory; Erica Lilleodden, GKSS Research Center

8:30 AM KeynoteSimulating Realistic Conditions and In-Situ Studies Using Neutron Diffraction: Ron Rogge1; 1National Research Council

9:00 AMWhy Neutrons to Study Superalloys?: Ralph Gilles1; Pavel Strunz2; Debashis Mukherji3; 1TU Muenchen; 2Nuclear Physics Institute; 3TU Braunschweig

9:15 AMDetermining the Impact of Cooling Rate and Aging Times on Nickel Base Super Alloys Using Callibrated XRD Intensity Ratioswhich Courses Were Actually Held?: Jaimie Tiley1; R Banerjee2; 1AFRL/RXLMD; 2University of Texas

9:30 AM InvitedDeformation Of Shape Memory Alloys Under Biaxial Loading: Donald Brown1; Catherine Tupper2; Vaidyanathan Raj3; Deniece Korzekwa1; Sisneros Thomas1; Clausen Bjorn`1; 1Los Alamos National Lab; 2Northwestern University; 3University of Central Florida

9:50 AMIn-Situ Observation of Strain Evolution in CP-Ti over Multiple Length Scales: Colleen Bettles1; Peter Lynch2; Andrew Stevenson2; Dacian Tomus1; Mark Gibson2; Kia Wallwark3; Justin Kimpton3; 1ARC Centre of Excellence for Design in Light Metals, Monash University; 2CSIRO Materials Science and Engineering; 3Australian Synchrotron

10:05 AMInfluence of Strain Rate on Mechanical Properties and Crystallographic Texture of Hot-Pressed and Rolled Beryllium: Thomas Sisneros1; Donald Brown1; Bjorn Clausen1; Saurabh Kabra1; William Blumenthal1; 1Los Alamos National Lab

10:15 AMIn-situ Neutron-Diffraction and Thermal Characterization of Fatigue Behavior: E-Wen Huang1; Rozaliya Barabash2; Bjørn Clausen3; Yee-Lang Liu4; Ji-Jung Kai4; Wenjun Liu5; Gene Ice2; Peter Liaw1; 1University of Tennessee; 2Oak Ridge National Laboratory; 3Los Alamos National Laboratory; 4National Tsing-Hua University; 5Argonne National Laboratory

10:25 AMIn-situ Neutron Diffraction Experiments as a Guide for Understanding the Microstructure Evolution during Deformation of Complex Materials: Steven Van Petegem1; Alexander Evans1; Helena Van Swygenhoven1; 1Paul Scherrer Institut

10:40 AMReal Time Synchrotron Radiography of High Temperature High Cycle Fatigue Crack Growth in Single-Crystal Nickel-Base Superalloys: Clinique Brundidge1; Naji Husseini1; Erik Hanson1; Chris Torbet1; Roy Clarke1; J. Wayne Jones1; Tresa Pollock1; 1University of Michigan

10:50 AMEvolution of Crystallographic Texture of TRIP Steel under Forming Load Conditions: Adam Creuziger1; Thomas Gnaeupel-Herold1; Tim Foecke1; 1National Institute of Standards and Technology

135

Technical Program

Th

ur.

AM

11:05 AM Break

11:15 AMSoftware Tools for the Monitoring, Analysis and Interpretation of Engineering Neutron Diffraction Data: Seung Yub Lee1; Youngshin Kim1; Hyuntae Na1; Ersan Ustundag1; 1Iowa State University

11:30 AMTransformation Pathways in High Temperature Shape Memory Alloy Candidates Based on the NiTi, NiMnGa and ZrCu Alloy Systems: Mohammed Azeem1; Seema Raghunathan1; David Dye1; 1Imperial College

11:45 AMMartensitic Transformation Induced Plasticity in Nanostructured Steel: A High-Energy X-Ray Diffraction Study: Sheng Cheng1; Hahn Choo1; Yandong Wang2; Xun-Li Wang3; Jon Almer4; Peter Liaw1; Young-Kook Lee5; 1University of Tennessee; 2Northeast University of China; 3Oak Ridge National Laboratory; 4Argonne National Laboratory; 5Yonsei University

12:00 PMMechanical Behavior and Microstructure Evolutions in a Nanocrystalline Ni-Fe Alloy: Li Li1; Tamas Ungar2; Yandong Wang3; Yang Ren4; Hahn Choo1; Peter Liaw1; 1Department of Materials Science and Engineering, The University of Tennessee; 2Department of Materials Physics, Eötvös University; 3School of Materials Science and Engineering, Beijing Institute of Technology; 4X-Ray Science Division, Argonne National Laboratory

12:10 PMNeutron Diffraction Study of the Internal Stress and Strain States of a Single Crystal Superalloy under Different Heat Treatment Conditions: Erdong Wu1; Guangai Sun2; Bo Chen2; Sucheng Wang1; Thilo Pirling3; Darren Hughes3; 1Institute of Metal Research, Chinese Academy of Science; 2Institute of Nuclear Physics and Chemistry; 3Institut Laue Langevin

12:25 PMUnderstanding the Texture Development during Biaxial Mechanical Loading: Ercan Cakmak1; Hahn Choo1; 1Department of Materials Science and Engineering, The University of Tennessee

12:35 PMHigh Pressure Deformation of Zirconium: James Wilkerson1; David Weldon1; Sven Vogel1; Donald Brown1; Carlos Tomé1; Sébastien Merkel2; 1Los Alamos National Laboratory; 2Laboratoire de Structure et Propriétés de l’Etat Solide Université de Lille

12:50 PMModelling and Characterisation of Gamma Prime (γ’) Evolution in a Nickel-Base Superalloy Using Small-Angle Neutron Scattering: David Collins1; Richard Heenan2; Howard Stone1; 1University of Cambridge; 2ISIS Facility, Rutherford Appleton Laboratory

Nuclear Energy: Processes and Policies: Material DevelopmentSponsored by: The Minerals, Metals and Materials Society, TMS Structural Materials Division, TMS/ASM: Nuclear Materials Committee, TMS: Public and Governmental Affairs CommitteeProgram Organizers: Brajendra Mishra, Colorado School of Mines; Aladar Csontos, U.S. Nuclear Regulatory Commission; Stuart Maloy, Los Alamos National Laboratory; Jeremy Busby, Oak Ridge National Laboratory; Sue Lesica, U.S. Department of Energy’s Office of Nuclear Energy


Session Chairs: Sue Lesica, US Department of Energy; Mark Bourke, Los Alamos National Laboratory

8:30 AM KeynoteCore Materials Development for Fast Reactors: Stuart Maloy1; M. Toloczko2; J. Cole3; Byun4; 1Los Alamos National Laboratory; 2Pacific Northwest National Laboratory; 3Idaho National Laboratory; 4Oak Ridge National Laboratory

9:05 AMDevelopments in Powder Production for Nano-Structured Ferritic Alloys: David Hoelzer1; Jim Bentley1; Michael Miller1; Brian Wirth2; Yong Kim2; Matt Ferry3; Jean Stewart3; 1Oak Ridge National Laboratory; 2University of California, Berkeley; 3Crucible Research

9:30 AMGrowth Kinetics and Phase Development in Diffusion Couples: U-Mo vs. Al-Si: Emmanuel Perez1; Dennis Keiser2; Yongho Sohn1; 1University of Central Florida; 2Idaho National Laboratory

9:55 AMIon Irradiation of an Ultrafine Grained 316 Austenitic Stainless Steel: Auriane Etienne1; Bertrand Radiguet1; Philippe Pareige1; Ruslan Valiev2; 1GPM UMR CNRS 6634; 2Institute of Physics of Advanced Materials

10:20 AM Break

10:35 AMRadiation Response of High Temperature, Ultrafine-Precipitation-Strengthened Steel: Yong Yang1; Todd Allen1; 1University of Wisconsin-Madison

11:00 AMFriction Stir Welding of Dispersion-Strengthened Alloy MA754: Jiye Wang1; Wei Yuan1; Rajiv Mishra1; Indrajit Charit2; 1Missouri University of Science and Technology; 2University of Idaho

11:25 AMDevelopment of a Simplified Powder Processing Method for Production of Oxide Dispersion Strengthened Ferritic Alloys: Joel Rieken1; I. Anderson2; M. Kramer2; 1Iowa State University; 2Ames Laboratory

11:50 AMImpact of Zirconium Hydride Precipitates on Fracture of Zirconium Alloys: Matthew Kerr1; Mark Daymond2; Richard Holt2; Jonathan Almer3; Stephanie Stafford4; 1US Nuclear Regulatory Commission; 2Queen’s University; 3Argonne National Lab; 4Kinectrics Inc

Pb-Free Solders and Emerging Interconnect and Packaging Technologies: Microstructure, Intermetallics, Whisker (II)Sponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS: Electronic Packaging and Interconnection Materials CommitteeProgram Organizers: Kwang-Lung Lin, National Cheng Kung University; Sung Kang, IBM; Jenq-Gong Duh, National Tsing-Hua University; Laura Turbini, Research In Motion; Iver Anderson, Iowa State University; Fu Guo, Beijing University of Technology; Thomas Bieler, Michigan State University; Andre Lee, Michigan State University; Rajen Sidhu, Intel Corporation


Session Chairs: John. W. Osenbach, LSI Corporation; Sinn-Wen Chen, National Tsing Hua University

8:30 AMEffects of Current Density on the Crystallographic Texture of Sn Based Electrodeposited Films Containing Cu and Pb: Aaron Pedigo1; Pylin Sarobol1; Peng Su2; John Blendell1; Carol Handwerker1; 1Purdue University; 2Cisco Systems, Inc

8:45 AMInterfacial Reaction and Microstructure Variation in the Liquid Reaction of Sn-xAg-Cu Solders on Cu-yZn Substrates: Chi-Yang Yu1; Jenq-Gong Duh1; 1National Tsing Hua University

9:00 AMInterfacial Reaction between Sn-Ag-Cu Solder and Cu Base Metal Using Laser Soldering Process: Hiroshi Nishikawa1; Noriya Iwata1; Tadashi Takemoto1; 1Osaka University


136

Technical Program

Th

ur.

AM

9:15 AMMicrostructure and Orientation Evolution Study on Sn-Ag-Cu Solder Joints as a Function of Position in Ball Grid Arrays Using Orientation Image Microscopy: Tae-Kyu Lee1; Kuo-Chuan Liu1; Bite Zhou2; Thomas R. Bieler2; 1Cisco Systems, Component Quality and Technology Group; 2Chemical Engineering and Materials Science, Michigan State University

9:30 AMStress and IMC Growth in Annealed and Reflowed Sn-Cu Bilayers and Their Relation to Whisker Kinetics: Nitin Jadhav1; Gordon Barr2; Eric Chason1; 1Brown University; 2EMC Corporation

9:45 AMNucleation and Solidification of Sn in Pb Free, SnAgCu Solder Joints: Babak Arfaei1; Yan Xing1; Eric Cotts1; 1Binghamton University

10:00 AM Break

10:15 AMMitigation of the Growth of Tin Whiskers by Surface Treatments: Chien-Hao Su1; Albert T. Wu1; 1National Central University

10:30 AMInterfacial Reactions of Cu/Sn3.5Ag/Au Solder Joint under Electromigration: Tsung-Chieh Chiu1; Kwang-Lung Lin1; 1National Cheng Kung University

10:45 AMThe Relationship between Whisker Growth and Corrosion in Sn-3.0Ag-0.5Cu: Keith Sweatman1; Takashi Nozu1; J Masuda1; Masuo Koshi1; Tetsuro Nishimura1; 1Nihon Superior Co., Ltd.

11:00 AMCorrosion Enhanced Sn Whisker Growth: John Osenbach1; H. L. Reynolds2; G. Henshall3; R. D. Parker4; P. Su5; 1LSI Corporation; 2Sun Microsystems, Inc.; 3Hewlett-Packard; 4Delphi Electronics and Safety; 5Cisco Systems

11:15 AMBack-Stress Induced Single Crystal Hillock Growth in Unpassivated and Nanotwinned Copper Lines under Electromigration at Device Operation Temperature: Hsin-Ping Chen1; King-Ning Tu1; Lih J. Chen2; Chien-Neng Liao2; W.W. Wu3; 1UCLA; 2NTHU; 3NCTU

11:30 AMMicrostructure Changes and Physical Properties of the Intermetallic Compounds Formed at the Interface between Sn-Cu Solders and Cu Substrate Due to Minor Additions of Alloying Elements: Petr Harcuba1; Milos Janecek1; 1Charles University Prague

11:45 AMReaction between Sn and Electroplated Cu Foils with Different Orientation: Tzu Sung Huang1; C. Y. Liu1; Hua-wei Tseng1; Yu-Hsiang Hsiao1; Cheng Tze Liu1; 1National Central University

Polymer Nanocomposites: Fabrication, Characterization, Modeling and ApplicationsSponsored by: The Minerals, Metals and Materials SocietyProgram Organizer: John Zhanhu Guo, Lamar University


Session Chairs: Jiahua Zhu, Lamar University; Wei Chen, University of Southern California


8:35 AM InvitedNegative Permittivity in Polymer Nanocomposites: Influences of Size Distribution of Carbon Nanofiber Networks: Bin Li1; Weihong Zhong1; 1Washington State University

9:05 AMCrystallization Behavior of Polymer Nanocomposites: Influence of Pressure and Nanoparticles: Qiang Yuan1; Jinesh Shah1; Juan Chen1; Yang Yang1; Devesh Misra1; 1University of Louisiana

9:25 AMEffect of Melt Flow Rate on the Properties of Polypropylene/Bentonite Nanocomposites: Tatianny Alves1; Laura de Carvalho1; Eduardo Canedo1; Pamela Cipriano1; Vanize Fernandes1; 1UFCG

9:45 AMSynthesis, Structure and Properties of a Novel Hybrid Bimodal Network Elastomer with Inorganic Cross-Links: Jinesh Shah1; Qiang Yuan1; Juan Chen1; Yang Yang1; Devesh Misra1; 1University of Louisiana

10:05 AMModification of Nanocrystal-Polymer Composite Electrolyte by Ethelene Glycol for Dye-Sensitized Solar Cell: Yang Ying1; Guo Xueyi1; 1Central South University

10:25 AM Break

10:40 AMNanoscale Near-Surface Deformation in Polymer Nanocomposites: Qiang Yuan1; Jinesh Shah1; Yang Yang1; Juan Chen1; Devesh Misra1; 1University of Louisiana

11:00 AM InvitedFormation and Structural Characterization of Potassium Titanates and the Lattice Potassium Reactivities: Qiang Wang1; Zhanhu Guo1; Jong Shik Chung2; 1Lamar University; 2POSTECH

11:20 AMCatalytic Reduction of Nitrates Using Modified Double Layered Hydroxides: Jewel Gomes1; George Irwin1; Kamol Das1; Manish Rahate1; Doanh Tran1; David Cocke1; 1Lamar University

11:40 AMMolecular Dynamics Simulation of Diffusion of Atmospheric Penetrates in Polydimethylsiloxane (PDMS) and PDMS-Based Nanocomposites: Alex Sudibjo1; Douglas Spearot1; 1University of Arkansas

12:00 PMMetallization of Platinum on Polyimide as Counterelectrode for Flexible Dye-Sensitized Solar Cells: Sheng-Jye Cherng1; Chih-Ming Chen1; 1National Chung Hsing University

Processing Materials for Properties: Polymers, Ceramics and GlassesSponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing DivisionProgram Organizers: Brajendra Mishra, Colorado School of Mines; Akio Fuwa, Waseda University; Paritud Bhandhubanyong, National Metal and Materials Technology Center


Session Chairs: Stuart Maloy, Los Alamos National Laboratory; Mychailo Toloczko, Pacific Northwest National Laboratory

8:30 AM KeynoteTransparent Ceramics by Spark Plasma Sintering of Oxide Nanopowders: Rachman Chaim1; Zhijian Shen2; Claude Estournes3; 1Technion - Israel Institute of Technology; 2Stockholm University; 3CIRIMAT et Plateforme Nationale CNRS de Frittage Flash

9:00 AMDirect Laser Deposition of Bulk Metallic Glasses: Hongqing Sun1; Pete Collins1; Hamish Fraser1; Katharine Flores1; 1The Ohio State University

137

Technical Program

Th

ur.

AM

9:20 AMMicroscopic Study of Slags from a Secondary Lead Blast Furnace: Fumito Tanaka1; Yusuke Kimura1; Mikio Watanabe2; 1Mitsubishi Materials Corp.; 2Hosokura Metal Mining Co., Ltd.

9:40 AMParticle Size Distribution of Natural Montmorillonite Clay Using Dispersion Analysis: Morgan Reed1; Gary Beall2; David Cocke1; Jewel Gomes1; 1Lamar University; 2Texas State University

10:00 AMStudy of Properties of Spinels, Obtained by Hydrothermal Synthesis: Oscar Restrepo1; Leidy Jaramillo1; Ernesto Baena Murillo1; 1National University of Colombia

10:20 AMResearch on the Performance of Environment-Friendly MgO-CaO-ZrO2 Refractories: Caiyun Lu1; Min Chen1; Jingkun Yu1; Zhongqiang Sun2; 1Northeastern University; 2Northeastern University Institute of Metallurgical Technology Co., Ltd

10:40 AM Break

10:50 AMSynthesis of Spinels by Thermal Spray Flame: Oscar Restrepo1; Ernesto Baena Murillo1; 1National University of Colombia

11:10 AMNovel Forming Techniques in Fabrication of Powder-Based Metals via Current Activated Tip-Based Sintering (CATS): D. Elting1; E. Villar1; K. Moon1; S. Kassegne1; K. Morsi1; 1San Diego State University

11:30 AMEffects of Sensitizer Length on Radiation Crosslinked Shape-Memory Polymers: Taylor Ware1; Walter Voit1; Ken Gall1; 1Georgia Institute of Technology

11:50 AMRadiation Crosslinked Polyacrylates with Shape Memory: Walter Voit1; Taylor Ware1; Ken Gall1; 1The Georgia Institute of Technology

12:10 PMSynthesis of Polyamine PET for the Sulfate Ions Removal in Aqueous Solution: Haiying Wang1; Liyuan Zhang1; Liyuan Chai1; Meilan Li1; 1Central South University

Stochastic Methods in Materials Research: Stochastic Methods II: Property Prediction and Material DesignSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Richard Hennig, Cornell University; Dallas Trinkle, University of Illinois, Urbana-Champaign


Session Chairs: Dallas Trinkle, University of Illinois Urbana-Champaign; Richard Hennig, Cornell University

8:30 AM InvitedProbabilistic Materials Science: Taking AIM: Greg Olson1; 1Northwestern University

9:00 AM InvitedThe Application of Bayesian Neural Network Modeling for the Prediction of the Tensile and Fracture Toughness Properties in a/ ß Titanium Alloys: Santhosh Koduri1; Vikas Dixit1; Peter Collins1; Hamish Fraser1; 1The Ohio State University

9:30 AMA Stochastic Simulation Study of the Role of Hierarchy in Crack-Initiating Microstructural Arrangements in Fatigue Lifetime Distribution: Sushant Jha1; Christopher Szczepanski1; James Larsen2; 1Universal Technology Corporation; 2US Air Force Research Laboratory

9:50 AM Break

10:00 AM InvitedMultiscale Design of Solute-Strengthened Aluminum Alloys: W. Curtin1; G. Leyson1; L. Hector2; 1Brown University; 2GM Technical Center

10:30 AMMultiscale Entropy Analysis of the Portevin-Le Chatelier Effect in an Al-2.5%Mg Alloy: Apu Sarkar1; P Barat2; P Mukherjee2; 1Bhabha Atomic Research Centre; 2Variable Energy Cyclotron Centre

10:50 AMUsing Eigenvalue and Information Theory Analysis to Predict Failure in Plastically Deformed Aluminum Sheet: Mark Stoudt1; Joseph Hubbard1; 1National Institute of Standards and Technology

11:10 AM Break

11:20 AM InvitedProbabilistic Polycrystal Model for Twin Nucleation and Propagation in Zr and Mg: Carlos Tome1; Irene Beyerlein1; Laurent Capolungo1; 1Los Alamos National Laboratory

11:50 AMPredicting and Validating the Stochastic Effects of Microstructure on Polycrystal Elasticity and Plasticity: Luke Brewer1; Corbett Battaile1; John Emery1; 1Sandia National Laboratories

12:10 PMModeling Stochastic Interaction between Fatigue Damage Evolution and Random Heterogeneities: Yibin Xue1; 1Utah State University

Sustainable Materials Processing and Production: Sustainable Technologies IISponsored by: The Minerals, Metals and Materials Society, TMS Extraction and Processing Division, TMS Light Metals Division, TMS: Recycling and Environmental Technologies Committee, TMS: Education CommitteeProgram Organizers: Christina Meskers, Umicore; Randolph Kirchain, Massachusetts Institute of Technology; Diana A. Lados, Worcester Polytechnic Institute; Markus Reuter, Ausmelt Limited

Thursday AM Room: 2BFebruary 18, 2010 Location: Washington State Convention Center

Session Chairs: Jeffrey S. Spangenberger, Argonne National Laboratory; Tim Skszek, Magna Cosma Engineering


8:35 AMLightweight Structural Concrete Incorporating Volcanic Materials for Sustainable Construction: Khandaker Hossain1; 1Ryerson University

9:00 AMMechanical and Chemical Development of Alkali Activated Slag Fine Aggregate Concrete by Design of Experiment (DOE): Alexander Moseson1; Aaron Sakulich1; Dana Moseson2; Ken MacKenzie3; M Barsoum1; 1Drexel University; 2Emerson Resources, Inc.; 3Victoria University of Wellington

9:25 AMDissolution Behavior of Ru into the Na2O-SiO2-Al2O3 Slag System: Hiroshi Shuto1; Toru Okabe1; Kazuki Morita1; 1University of Tokyo

9:50 AMNew Process for Separation and Recovery of Platinum Group Metals: Tsuyoshi Yukawa1; Kazuki Morita1; Toru Okabe1; 1The University of Tokyo


138

Technical Program

Th

ur.

AM

10:15 AM Break

10:25 AMReductive Leaching Behavior of Valuable Metals from Spent Li-Ion Polymer Battery Cathode Material: Jingu Kang1; Jeong-soo Sohn2; Tae-hyun Kim2; Young-uk Kim1; Dong-hyo Yang2; Shun Myung Shin2; 1Korea University of Science and Technology (UST); 2Korea Institute of Geoscience and Mineral Resources (KIGAM)

10:50 AMMaterialization of Manganese by Selective Precipitation from Used Battery: Shun Myung Shin1; Jin-gu Kang2; Young-Uk Kim2; Tae-Hyun Kim1; Soo-Kyung Kim1; Jeong-Soo Sohn1; 1Korea Institute of Geoscience & Mineral Resources (KIGAM); 2Korea University of Science & Technology (UST)

11:15 AMLeaching Studies for the Recovery of Metals from the Waste Printed Circuit Boards (PCBs): Manis Kumar Jha1; Shivendra2; Vinay Kumar1; Banshi Dhar Pandey1; Rakesh Kumar1; Jae-chun Lee3; 1National Metallurgical Laboratory (CSIR), India; 2Indian Institute of Technology, Kanpur, India; 3Korea Institute of Geosciences and Mineral Resources, South Korea


The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Grain Boundaries and Grain Boundary EngineeringSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Kevin Hemker, Johns Hopkins University; Diana Farkas, Virginia Tech

8:30 AM InvitedModelling and Grain Boundary Engineering for High Performance Photovoltaic Polysilicon: Tadao Watanabe1; Kota Kido2; Sadahiro Tsurekawa3; 1Visiting Professor, Northeastern University, Shenyang, China, formerly Tohoku University (Sendai,Japan); 2YKK Corp., Japan; 3Kumamoto University

8:55 AM InvitedAtomic Characterization of Grain Boundary Networks in Poly- and Nano-crystalline Materials and Its Application: Mo Li1; Tao Xu1; 1Georgia Instiute of Technology

9:20 AMThe Role of Microstructure Scale and Morphology on Mechanical Behavior in FCC Metals: Remi Dingreville1; Corbett Battaile2; Luke Brewer2; Elizabeth Holm2; 1Polytechnic Institute of NYU; 2Sandia National Laboratories

9:35 AMScale Invariance in Grain Misorientation Distribution: Claude Fressengeas1; Benoit Beausir1; Nilesh Gurao2; Satyam Suwas2; Laszlo Toth1; 1University Paul Verlaine - Metz; 2Indian Institute of Science

9:50 AM Break

10:05 AM InvitedIntermittency and Multiplication-Limited Flow in Microcrystal Deformation: Dennis Dimiduk1; Ed Nadgorny2; Chris Woodward1; Michael Uchic1; Satish Rao3; Paul Shade4; 1Air Force Research Laboratory; 2Michigan Technological University; 3UES, Inc.; 4UTC, Inc.

10:30 AM InvitedGrain Boundary Plane Engineering: Model Experiments: Pavel Lejcek1; 1Institute of Physics, AS CR

10:55 AMMolecular Dynamics Simulations of Atomistic Mechanisms for Grain Boundary Migration in [001] Twist Boundaries: Xinan Yan1; Hao Zhang1; 1University of Alberta

11:10 AMAb Initio Investigation of Grain Boundary Cohesion in Al Alloys: Shengjun Zhang1; Oleg Kontsevoi1; Arthur Freeman1; Gregory Olson1; 1Northwestern University

11:25 AMRole of Grain Boundary Character Distribution on Dynamic Recrystallization Using Monte Carlo Simulations: Jared Stein1; Megan Frary1; 1Boise State University

11:40 AMDevelopment of a Microstructure Sensitive Model Which Shows Dislocation Patterning: Alankar Alankar1; Ioannis Mastorakos1; David Field1; 1Washington State University

11:55 AMDislocation Dynamics Simulations of Slip System Interactions and Dislocation Boundary Formation: Benoit Devincre1; Grethe Winther2; 1CNRS-ONERA; 2Risø National Laboratory

12:10 PMOn the Role of Dislocations during the Martensitic Transformation in NiTi Shape Memory Alloys: Gunther Eggeler1; Antonin Dlouhy2; 1Ruhr University Bochum; 2IPM Brno

12:25 PMDisclinations and Deformation of Hierarchically Twinned Martensite: Peter Mullner1; Alexander King2; 1Boise State University; 2Ames Laboratory

12:40 PMMesoscale Polycrystal Calculations of Damage Histories in Shock Loaded Metals: John Bingert1; Davis Tonks1; Veronica Livescu1; Curt Bronkhorst1; 1Los Alamos National Lab

The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications: Grain Boundaries, Dislocations and Mesoscopic ModelingSponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS/ASM: Computational Materials Science and Engineering CommitteeProgram Organizers: Mo Li, Georgia Institute of Tech; David Srolovitz, Institute for High Performance Computing, Agency for Science, Technology and Research, Singapore; Adrian Sutton, Imperial College London; Vaclav Paidar, Institute of Physics AS CR vvi; Jeff De Hosson, University of Groningen


Session Chairs: Tadao Watanabe, Visiting Professor, Northeastern University, Shenyang, China, formerly Tohoku University (Sendai,Japan); John Bassani, University of Pennsylavnia

8:30 AM InvitedShear Stresses, Dislocations and Grain Boundaries: Kevin Hemker1; 1Johns Hopkins University

8:55 AM InvitedThe Effect of Segregated Sp-Impurities on Grain-Boundary Embrittlement in Nickel: Monika Vsianska1; Mojmir Sob1; 1Masaryk University, Faculty of Science

139

Technical Program

Th

ur.

AM

9:20 AMMulti-Time Scale Modeling of the Annealing of Radiation-Induced Defects at Tilt Grain Boundaries: Xian-Ming Bai1; Arthur Voter1; Richard Hoagland1; Michael Nastasi1; Blas Uberuaga1; 1Los Alamos National Laboratory

9:35 AMMesoscale Modeling of Particle Strengthened Interfaces: Seth Wilson1; A.D. Rollett1; 1Carnegie Mellon University

9:50 AM Break

10:10 AM InvitedEffect of Pre-Melting on Grain Boundary Properties: T. Frolov1; Y. Mishin1; J. W. Cahn2; 1George Mason University; 2National Institute of Standards and Technology

10:35 AM InvitedMolecular Dynamics and Phase-Field-Crystal Studies of Grain Boundary Premelting in bcc Fe and fcc Ni: David Olmsted1; Dorel Buta2; Ari Adland1; Mark Asta2; Alain Karma1; Stephen Foiles3; 1Northeastern University; 2University of California, Davis; 3Sandia National Laboratories

11:00 AM InvitedLattice Geometry Effects on Ideal Shear Resistance and Dislocation Mobility: Vasily Bulatov1; Keonwook Kang2; Wei Cai2; 1Lawrence Livermore National Laboratory; 2Stanford University

11:25 AMApplications of γ-Surfaces in Phase Field Modelling of Dislocations in Ni-Base Superalloys: Vassili Vorontsov1; Roman Voskoboinikov1; Catherine Rae1; 1University of Cambridge

11:40 AMPhase Field Modeling of Deformation Mechanisms in Ni-Base Superalloys: Ning Zhou1; Chen Shen2; Libor Kovarik1; Raymond Unocic1; Michael Mills1; Yunzhi Wang1; 1The Ohio State University; 2GE global

11:55 AMPhase Field Simulations of Brittle Fracture in Composites with Spatially Varying Elastic Moduli: Rajeev Ahluwalia1; Weili Cheah2; 1Institute of High Performance Computing; 2Institute of Materials Research and Engineering

12:10 PMPhase Field Simulations of Elastic Deformation Driven Grain Boundary Migration in Copper: Michael Tonks1; Paul Millett1; Dieter Wolf1; 1Idaho National Laboratory

Thermo-Mechanical Response of Molecular Solids: Multi-Resolution Theory, Simulations, and Experiments: Molecular Solids IISponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials DivisionProgram Organizers: Alejandro Strachan, Purdue University; Thomas Sewell, University of Missouri-Columbia; Rodolfo Pinal, Purdue University; Chunyu Li, Purdue University


Session Chairs: Alejandro Strachan, Purdue University; Chunyu Li, Purdue University


8:35 AM InvitedFundamental Processes in a Prototypical Organic Material: Nitromethane: Donald Thompson1; 1University of Missouri-Columbia

9:05 AMElastic Deformation Mechanics of Cellulose Nanocrystals: Xiawa Wu1; Ryan Wagner1; Arvind Raman1; Robert Moon2; Ashlie Martini1; 1Purdue University; 2US Forest Service/ Purdue University

9:25 AMBreak Down Assessment and Modeling of the Enthalpic Relaxation of Aging Glasses through a Combination of Experiment and Simulation: Chen Mao1; Sai Prasanth Chamarthy2; Rodolfo Pinal3; 1Xenoport, Inc.; 2Schering-Plough Research Institute; 3Purdue University

9:45 AMTransforming Powder Processibility by Particle Surface Engineering: Calvin Sun1; 1University of Minnesota

10:05 AM Break

10:25 AMMultiscale Coarse-Grain Modeling of Nitromethane and RDX: Sergei Izvekov1; Peter Chung1; Betsy Rice1; 1U.S. Army Research Laboratory

10:45 AMRDX Material Properties Containing Defects: Lynn Munday1; Peter W. Chung1; Betsy Rice1; Santiago Solaris2; 1U.S. Army Research Laboratory; 2University of Maryland

11:05 AM InvitedUnraveling Shock-Induced Chemistry Using Ultrafast Lasers: David Moore1; 1Los Alamos National Laboratory

11:35 AM InvitedEngineering of the Thermo-Mechanical Response of Molecular Crystals by Solid Solution Impurity Control: Daniel Hooks1; 1Los Alamos National Laboratory


140

Technical Program

Po

ster

s

General Poster SessionSponsored by: The Minerals, Metals and Materials Society, TMS Electronic, Magnetic, and Photonic Materials Division, TMS Extraction and Processing Division, TMS Light Metals Division, TMS Materials Processing and Manufacturing Division, TMS Structural Materials DivisionProgram Organizer: Mark Palmer, Kettering University

Mon PM-Wed PM Room: Exhibit HallFebruary 15, 2010 Location: Washington State Convention Center

3D Interconnected Calcium Phosphate Scaffolds for Bone-Tissue Engineering: Mohammad Tarafder1; Shashwat Banerjee1; Vamsi Balla1; Amit Bandyopadhyay1; Susmita Bose1; 1Washington State University

A Materials Investigation of the UV Degradation of Eco-Friendly, Polypropylene Polymer Composites with Kenaf Fibers: Christine Carpenter1; Katherine Chen1; Christina Blattner1; Katie Greenstein1; Robert Arens1; Edmund Saliklis1; 1Cal Poly State University

A Molecular Dynamics Study of the Tensile Deformation Behavior of Au Nanowires: Na-Young Park1; Ho-Seok Nam1; Pil-Ryung Cha1; Seung-Cheol Lee2; 1Kookmin University; 2Korea Institute of Science and Technology (KIST)

A Study of the High Rate Response of Squeeze Cast Magnesium Alloy AZ91: Phil Gullett1; Wilburn Whittington1; Michael Fortier2; 1Mississippi State University; 2University of Rochester

A Study on the Microstructure and Mechanical Properties of the Powder Injection Molded WC-8%Co: Sung-Hyun Choi1; Kyoung-Rok Do1; Sang-Dae Kang1; Kwon-Koo Cho1; In-Shup Ahn1; 1Gyeongsang National University

A Study on the Microstructures and Electromagnetic Interference Shielding of Sn-Al-Ni Thin Films: Hung Fei-Yi1; Hung Fei-Shuo2; Chiang Che-Ming2; Lui Truan-Sheng3; 1Institute of Nanotechnology and Microsystems Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University; 2Department of Architecture, National Cheng Kung University; 3Department of Materials Science and Engineering, National Cheng Kung University

A Study on the Stress Test of Truck Frames for Freight Trains: Sung Cheol Yoon1; 1Korea Railroad Research Institute/Railroad Safety Research and Testing Center

A Study on the Structural Design of the Car Body of a Locomotive: Sung Cheol Yoon1; Jeongguk Kim1; Myung Yong Kim1; Kang Youn Choe1; 1Korea Railroad Research Institute/Railroad Safety Research and Testing Center

A Study on the Structure and Mechanical Properties of HSS T42 Steel Using Powder Injection Moulding Method (PIM): Kyoung-Rok Do1; Sung-Hyun Choi1; Sang-Dae Kang1; Su-gun Lim1; In-Shup Ahn1; 1School of Nano and Advanced Materials Engineering, I-Cube Center, K-MEM R&D Cluster

A Thermo-Kinetic Model and Experimental Analysis of Multiple Passes Laser Phase Transformation Hardening by Using High-Power Direct Diode Laser: Soundarapandian Santhanakrishnan1; Radovan Kovacevic1; 1Southern Methodist University

Aerosol Route Synthesis of Copper Oxide Nanoparticles Using Copper Nitrate Solution: Burcak Ebin1; Ovgu Gencer1; Sebahattin Gurmen1; 1Istanbul Technical University

AlGaAs-Based Optical Device Fabricated on Si Substrate Using Microchannel Epitaxy: Shigeya Naritsuka1; Daisuke Kanbayashi1; Takuya Kawakami1; Yuhei Ando1; Takahiro Maruyama1; 1Meijo University

Ambient Temperature Stress Corrosion Cracking of 304L Stainless Steel: Swati Ghosh1; Vivekanand Kain1; 1BARC

Anisotropic Behavior of Rolled AZ31 Magnesium under Quasi-Static and High Rate Loading: Phil Gullett1; Matthew Tucker1; 1Mississippi State University

Analysis of Oxide Formation in High Mn Twinning-Induced Plasticity-Aided Steel during Dew-Point Control: Woong-Pyo Hong1; Sung-Il Baik1; Sung-Dae Kim1; Gyo-Sung Kim2; Sun-Ho Jeon2; Kwang Geun Chin2; Chang-Seok Oh3; Young-Woon Kim1; 1Seoul National University; 2POSCO Technical Research Laboratory; 3Korea Institute of Materials Science

Annealing Behavior of TiO2-Sheathed Ga2O3 Nanowires: Chongmu Lee1; Hyunsoo Kim1; Changhyun Jin1; Jina Jun1; Chanseok Hong1; Jungwoo Kang1; 1Inha University

Atomic-Scale Characterization of Grain Boundary Embrittlement in Structural Steels: NamSuk Lim1; JaeBok Seol1; ChanGyung Park1; Raghavan Ayer2; Howie Jin2; Russell Mueller2; 1Pohang University of Science & Technology; 2ExxonMobil Research & Engineering

Atomistic Study of Dislocation/Vacancy Interactions in bcc Metals: Zhiming Chen1; Matous Mrovec2; Peter Gumbsch1; 1Institut für Zuverlässigkeit von Bauteilen und Systemen, Universität Karlsruhe (TH); 2Fraunhofer-Institute Für Werkstoffmechanik

Basic Study on Synthesis of Sphalerite with Low Iron and Oxygen Pressure Acid Leaching of Sphalerite: Yan Gu1; Ting-an Zhang1; Gouzhi Lv1; Zhihe Dou1; Yan Liu1; Weiguang Zhang1; 1Northeasten University

Carpenter ACUBE™ 100 an Alternative Copper-Beryllium Alloy for High-Load Bushings and Bearings Applications: Rick Frank1; Karl Heck1; Joseph Stravinskas1; 1Carpenter Technology

Cations Removal from Synthetic Neutral Zinc Leach Solution Using Synthetic Iron Oxide: Mamata Mohapatra1; P. Singh2; S. Anand1; B.K. Mishra1; 1Institute of Minerals and Materials Technology; 2Murdoch University

Comparative Study of Microstructural Characteristics of PM Sintering and Plasma Spraying Coating on a Steel Surface: Zhang Jie1; WANG Maocai2; ZHAI Yuchun1; 1Northeastern University; 2State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences

Comparison of Stress Corrosion Cracking and Hydrogen Embrittlement Resistance of High Strength Aerospace Alloys: David Wert1; Thomas Werley1; 1Carpenter Technology Corp.

Corrosion Behavior of Al-Si-Cr-Ni-Cu Bearing Low Carbon Steel in a Cyclic Dry/Wet Laboratory Test: Dongping Zhan1; Huishu Zhang1; Songlian Bai1; Zhouhua Jiang1; 1Northeastern University

Corrosion Behavior of Aluminum Matrix Composite (AMCS) Prepared by Atomization: Muna Abbass1; Mohammad Waheed1; Ali Faris1; 1University of Technology, Baghdad

Cracking near a Hole on a Heat Resistant Alloy Subjected to Thermo-Mechanical Cycling: Feng-Xun Li1; Ki-Ju Kang1; 1Chonnam National University

Defect Energetics and Fission Product Transport in ZrC: Sungtae Kim1; Young Ki Yang1; Tyler Gerczak1; Todd Allen1; Dane Morgan1; Izabela Szlufarska1; 1University of Wisconsin - Madison

Deformation Field and Microstructure of Copper in Flat Punch Indentation: Matthew Hudspeth1; T. Murthy1; C. Saldana1; Srinivasan Chandrasekar1; 1Purdue University

Deformation in Shock-Loaded Materials: Veronica Livescu1; John Bingert1; George Gray III1; Davis Tonks1; 1Los Alamos National Laboratory

Deformation of High Purity Copper Specimens in Compression between Flat and Grooved Dies: Bashir Raddad1; Teahert Al-hashani2; Mohieldeen Abdel-Rahman3; 1El-Fateh University; 2Academy of Graduate Studies - School of Applied Sciences and Engineering Department; 3Minia University

Dendrite Tip Shape in Pivalic Acid-Ethanol and Succinonitrile-Salol Systems: Myung-Jin Suk1; Young-Min Park1; Young-Do Kim2; 1Kangwon National University; 2Hanyang University

Development of In-Situ Mg-Based Bulk Metallic Glass Composites with High Plasticity: Ka Ram Lim1; Eun Soo Park2; Won Tae Kim3; Do Hyang Kim1; 1Yonsei University; 2Seoul National University; 3Cheongju University

141

Technical Program

Po

ster

s

Development of Ultrasonic Techniques for Process Control in Iron and Steel Making: Jagdish Pandey1; Manish Raj1; Krishnan Balasubramaniam1; Nikhiles Bandyopadhyay1; 1Tata Steel Ltd.

Dissolution of Platinum from Scrap Automotive Catalytic Converters Using a Combination of HCl+H2O2: Candeniz Uysal1; Serdar Aktas1; Eray Kizilaslan1; Kelami Sesen1; 1Istanbul Technical University

Dynamics Research on Leaching Process of Bonded Copper Oxides Strengthen by Mechanical Activation: Liu Wei1; Tang Motang1; Tang Zhaobo1; He Jing1; Yang Shenghai1; Yang Jianguang1; 1Central South University

EDM and AWJ Edge Finishing on Surface Morphology of Hybrid Composite Laminates: Laxminarayana Pappula1; V. Isvilanonda2; M, Ramulu2; Naga Prasada Rao Boyalapalli3; 1University College of Technology, Osmania University; 2Department of Mechanical Engineering, University of Washington; 3Department of Mechanical Engineering, University College of Engineering, Osmania University

Effect of Niobium on Solidification Structure of Gray Cast Iron: Zhou Wenbing1; Zhu Hongbo1; Zheng Dengke1; Hua Qin1; Zhai QiJie1; 1Shanghai University

Effect of Nitrogen Addition on Isothermal Phase Transformation and Mechanical Properties in Biomedical Co-Cr-Mo Alloys: Shingo Kurosu1; Hiroaki Matsumoto1; Akihiko Chiba1; 1Institute for Materials Research, Tohoku University

Effect of Non-Sinusoidal Oscillation Parameters on Liquid Friction and Lubrication near the Meniscus of Slab Continuous Casting Mold: Xiangning Meng1; Miaoyong Zhu1; 1Northeastern University

Effect of Particle Size on the Microstructure of Rapidly Solidified Hypereutectic Iron Alloy Powder: Min Yang1; Yongxiang Dai1; Changjiang Song1; Qijie Zhai1; 1Shanghai University

Effect of Silicon Addition on the Microstructure and Mechanical Properties of Extruded Mg-Zn Alloys: Hwa Chul Jung1; Ji Hoon Hwang1; Kwang Seon Shin1; 1Magnesium Technology Innovation Center, Seoul National University

Effects of Lamination on Mechanical Behavior of Nano-Structured Aluminum Composite: Hala Hassan1; Adel El-Shabasy1; John Lewandowski2; 1Ain Shams University, Faculty of Engineering; 2Case Western Reserve University

Effects of Material and Process Parameters on Final Residual Stress and Distortion Predictions during Welding of Steel: Amir Masoud Akbari Pazooki1; 1TU Delft

Effects of Mesh Size on Final Residual Stress and Distortion Predictions during Welding of DP600 and AISI 316L Steel Plates: Amir Masoud Akbari Pazooki1; 1TU Delft

Effects of Microstructural and Mechanical Length Scales on Fatigue Crack Propagation in Beta-Annealed Ti-6Al-4V: Thomas Villarreal1; Ikshawku Atodaria1; Pedro Peralta1; 1Arizona State University

Effects of Post-Deformation Annealing Conditions on the Behavior of Lamellar Cementite and the Occurrence of Delamination in High Strength Cold Drawn Pearlitic Steel Wires: Jung Won Lee1; Ui Gu Kang1; Yong Shin Lee1; Kyung Tae Park2; Wonjong Nam1; 1Kookmin University; 2Hanbat University

Effects of Thermal Residual Stress and Whisker Network on Neutron Diffraction Patterns for SiC-Alumina Composites during Creep Deformation: Juan Kong1; Nikolas Provatas1; David Wilkinson1; 1McMaster University

Effects of Twin on the Mechanical Behavior of Mg Single Crystals: Hwa Chul Jung1; Ming Zhe Bian1; Nam Kyoung Kwon1; Kwang Seon Shin1; 1Magnesium Technology Innovation Center, Seoul National University

EKOLUBE™, the Economical, Eco-Friendly Solution for Sendzimir™ 20Hi Mills: Suresh Neelakantan1; Josef Graetz1; 1Magnum Integrated Technologies

Electrical Conductivity Manipulation and Switching Phenomena of PBZT Thin Film by Doping Process: Jiahua Zhu1; Sung Park2; John Willis2; Max Alexander3; John Zhanhu Guo1; 1Lamar University; 2NGC Aerospace Systems; 3Air Force Research Laboratory

Electrochemical Behavior of Ni-Cr Base Alloys in Corrosive Environment: Aezeden Mohmaed1; 1University of Manitoba

Electrochemical Behavior of RuO2-IrO2-SnO2/Ti Electrode under Mild and Forced Conditions: Ozgenur Kahvecioglu1; Servet Timur1; 1Istanbul Technical University

Electrochemical Impedance Spectroscopy of SEI on Porous SnO2/CNT Composite Anode for Lithium Ion Batteries: Abirami Dhanabalan1; Xifei Li1; Yan Yu2; Kevin Bechtold1; Chunlei Wang1; 1Florida International University; 2Max Planck Institute for Solid State Research

Enhanced Mechanical Properties in Mg-Based Ultrafine Eutectic-Dendrite Composites: Jong Youn Lee1; Tae Eung Kim1; Sung Woo Shon1; Won Tae Kim2; Do Hyang Kim1; 1Yonsei University; 2Cheongju University

Enhancing Mineral Beneficiation by High Intensity Power Ultrasound: Jagdish Pandey1; Manish Raj1; Moni Sinha1; Nikhiles Bandyopadhyay1; 1TATA STEEL Ltd.

Evaluation of High Energy Milling Behavior of ZnO Powders in Different Milling Conditions: Sezen Yakar1; Ahmet Söyler1; Burak Özkal1; Sebahattin Gürmen1; Mustafa Öveçoglu1; 1ITU

Fabrication and Mechanical Properties of NbC-binders (Co, Ni. Fe) Nano-Composite Consolidated by High Frequency Induction Heated Sintering: Kee-Do Woo1; Duck-soo Kang1; Sang-hyuk Kim1; Seong-bae Park1; Na-young Song1; In-jin Shon1; 1Chonbuk National University

Fabrication of FeS2-Pyrite Cathode by Spray Dryer Methode: Sang Dae Kang1; Sung Hyun Choi1; Kyung Rok Do1; Hyo Jun Ahn1; In Sup Ahn**1; 1School of Nano and Advanced Materials Engineering, I-Cube Center, K-MEM R&D Cluster, Gyeongsang National University

Fabrication of the Mg/Al Clad Sheet and Its Mechanical Properties: Beomsoo Shin1; Sockyeon Yoon1; Changseong Ha2; Seungkwan Yun2; Donghyun Bae1; 1Yonsei University; 2G-Alloy Technology Co., Ltd.

Facile Synthesis of Hollow Co3O4 Microspheres by Solution Spray-Oxidation Method and Its Properities as Supercapacitors: Guo Qiusong1; Du Guangrong1; Guo Xueyi1; 1Central South University

Fast SET Switching Behavior of Nano-Scale AgInSbTe Based Phase Change Memory: Sung-Hoon Hong1; Byeong-Ju Bae1; Heon Lee1; 1Korea University

Fatigue Life Prediction for Notched Structures Using Mechanistic Multistage Fatigue Model: Yibin Xue1; Brian Jordon2; Mark Horstemeyer2; 1Utah State University; 2Mississppi State University

Fatigue of Hybrid Polymeric Composites on Twisting: Nikoloz Chikhradze1; Levan Japaridze2; Guram Abashidze2; Levan Okijava3; 1Mining Institute/Georgian Technical University; 2G. Tsulukidze Mining Institute; 3Zavriev Institute of Building Mechanics and Seismic Stability

Finite Element Analysis of Residual Stress of Plasma-Sprayed Coatings on Thick Wall Components Based on Nastran Software: Li-Ping Niu1; Ting-an Zhang1; Guan-yong Shi1; Zhi-he Dou1; Ji-cheng He1; Xiao-chang Cao1; Dongping Zhan1; 1Northeastern University

Flip Chip Bonding of Sn-58Bi Solder Bumps Formed on Flexible PCB: Sehyung Lee1; Yuesoen Shin1; Sehoon Yoo1; Chang -Woo Lee1; 1Korea Institute of Industrial Technology

Formation of Different Generations of Gamma Prime Precipitates in Rene 88DT Nickel Base Superalloy: Antariksh Singh1; Junyeon Hwang1; Soumya Nag1; Srinivasan Rajagopalan2; Jaimie Tiley3; Gopal Viswanathan2; Hamish Fraser2; Rajarshi Banerjee1; 1University of North Texas; 2The Ohio State University; 3Air Force Research Laboratory

Fracture and Fatigue of Fe-Based Metallic Glass Ribbons: Adel El-Shabasy1; Hala Hassan1; John Lewandowski2; 1Ain Shams University; 2Case Western Reserve University


142

Technical Program

Po

ster

s

Furnace Pressure Control System: Robert Voyer1; 1Hatch

Glass Forming Ability and Mechanical Properties of Zr-Based Zr-Al-Ni Metallic Glasses: Yanhui Li1; Wei Zhang2; Chuang Dong1; Jianbing Qiang2; Akihiro Makino2; Akihisa Inoue3; 1School of Materials Science and Engineering, Dalian University of Technology; 2Institute for Materials Research, Tohoku University; 3Tohoku University

Grain Boundary Character Distribution and Mechanical Property of an as Cold Rolled High Nitrogen Austenitic Stainless Steel: Wei Yan1; Yin Shan1; Ke Yang1; Wei Wang1; 1Institute of Metal Research

Heterogeneous Phase Nucleation and Growth in ß-Ti Alloys: Robert Williams1; Soumya Nag2; Arun Devaraj2; Peter Collins1; Srinivasan Rajagopalan1; Rajarshi Banerjee2; Hamish Fraser1; 1The Ohio State University; 2University of North Texas

High Reliability Bonding Process Using Ag-Cu Mixed Nanoparticles: Yoshiaki Morisada1; Toru Nagaoka1; Masao Fukusumi1; Yukiyasu Kashiwagi1; Mari Yamamoto1; Masami Nakamoto1; Hiroyuki Kakiuchi2; Yukio Yoshida2; 1Osaka Municipal Technical Research Institute; 2Daiken Chemical Co.

Impact Toughness Enhancement of an Electron Beam Welded Ti-6Al-4V Titanium Alloy through Post-Welding Heat Treatment: Christophe Buirette1; Julitte Huez1; 1CIRIMAT-ENSIACET

Impacts of Impurities on the Properties of Secondary Al-Si-Cu Alloys: Daryoush Emadi1; Musbah Mahfoud1; 1Qatar University

Improvement of Heat Dissipation in High-Power Light-Emitting Diodes Using Highly Heat Conductive Die-Attach Material: Chia-ju Chen1; 1National Chung Hsing University

In-Plane Compressive Properties of Hybrid Dyneema®/Carbon Fiber Reinforced Polymer Matrix Composites: Shahram Amini1; John Shaw1; Michael Rossol1; Frank Zok1; 1University of California, Santa Barbara

Influence of Cold Working and Grain Size on the Pitting Corrosion Resistance of Ferritic Stainless Steel: Zhen Li1; Zhouhua Jiang1; Huabing Li1; Zurui Zhang1; 1Northeastern University

Influence of Forming Ratio on Mechanical Properties of Pipe Line: Amir Abachi1; Mehdi Naderi1; Afshin Erfanfar1; Reza Shamloo1; 1Safa Rolling and Pipe Mills Co.

Influence of Shock Prestraining and Texture on the Dynamic-Tensile-Extrusion of High-Purity Zirconium: Daniel Martinez1; Carl Trujillo1; Joel Montalvo1; Victoria Webster1; 1Los Alamos National Laboratory

Influence of the Magnesium Addition on the Strength, Ductility and Microstructure of Al-7.4Zn At.% Alloy Artificially Aged at Different Times: J.Baron De la Rosa1; A. García H.1; B. Campillo2; S. Valdez2; 1FQ-UNAM; 2UNAM-ICF

Influences of Rotational Speed and Welding Speed on the Friction Stir Welding between Copper and 304L Stainless Steel: Yousef Imani1; Mohammad kazem Besharati1; Reza Abdi1; 1University of Tehran

Interfacial Reactions of Pure Sn,Sn-3.0Ag-0.5Cu and Sn-9.0Zn Lead-Free Solders with the Fe-42Ni Substrate: Yu-Ping Hsieh1; Yee-wen Yen1; Chien-Chung Jao1; 1National Taiwan University of Science & Technology

Investigation of Possibility to Metallic Interconnector on the IT (Intermediate Temperature) SOFC: Kee-Do Woo1; MinSeok Moon1; Eui-pyo Kwon1; Sang-hyuk Kim1; Duck-soo Kang1; Myeong-han Yoo1; 1Chonbuk National University

Investigation of Weldabiliy during Laser Lap Welding of Dissimilar Al Alloys: Cheolhee Kim1; Do-Chang Ahn1; Namhyun Kang2; 1KITECH; 2Pusan National University

Investigation on the Compressive Properties and Microstructural of New Sand Polymer Composite: Esmaeil Sadeghi Meresht1; Jamshid Aghazadeh1; Mohsen Seifi1; 1Amirkabir University of Tehran

Investigation Surface Faint-Sliver Defects of Cold-Rolling IF Steel Sheets from Slabs Produced by Continuous Casting: Jian Zhang1; Cheng Dengfu1; Li Jianquan2; 1Chongqing University; 2Vanadium Recovery & Steelmaking Plant, Panzhihua New Steel & Vanadium Co.Ltd

Investigations of Shock_Wave Induced SHS Reactions in Ni-Al System: George Oniashvili1; Mikheil Chikhradze1; Inga Janelidze1; Nikoloz Chikhradze2; 1Institute of Metallurgy and Materials Science; 2G. Tsulukidze Mining Institute

Joint Strength of Cu-Sn58Bi-Cu Bonding with Cap Bump Thickness Variation: Yueseon Shin1; Sehyung Lee1; Jeonghan Kim1; Changwoo Lee1; Sehoon Yoo1; 1KITECH/Micro-Joining Center

Kinetics of Titanium and Chromium Carbides Coating Produced on Structural Steel by Thermo-Reactive Deposition Technique: Helal Tahirlu1; Mosaad Sadawy1; Elshan Elshan1; Taherli Shirinov1; 1University of Technology

Laser Beam Welding of Haynes 188: Akin Odabasi1; Necip Unlu1; Gultekin Goller1; Niyazi Eruslu1; 1Istanbul Teknik Universitesi

Lattice Constant Effect on the Deformation Behavior of Mg-Zn-Re Alloys: Sock Yeon Yoon1; Beomsoo Shin1; Donghyun Bae1; 1Yonsei University

Local Stress and Strain Analysis of Atomistic Simulations: Matthew Priddy1; Donald Ward1; Phil Gullett1; 1Center for Advanced Vehicular Systems, Mississippi State University

Low Temperature Bonding Process Using Cu Nanoparticles: Toru Nagaoka1; Yoshiaki Morisada1; Masao Fukusumi1; Yukiyasu Kashiwagi1; Mari Yamamoto1; Masami Nakamoto1; Hiroyuki Kakiuchi1; Yukio Yoshida1; 1Osaka Municipal Technical Research Institute

Magnetic Properties of High-Coercivity Nanocrystalline Pr-Fe-Co-Al-B Bulk Amorphous: Lotfi Bessais1; 1CNRS

Mechanical Properties and Rapid Consolidation of Binderless Nanosturctured Tantalum Carbide from Mechanically Activated Powder by Pulsed Current Activated Sintering: In-Jin Shon1; Byung-Ryang Kim1; Min-Seok Moon1; Kee-Do Woo1; Na-Ri Kim1; 1Chonbuk University

Mechanical Properties of the Ti-Nb-X%HA Biomaterials Fabricated by High Frequency Induction Heated Sintering Using High Energy Ball Milled Powders: Kee-Do Woo1; Sang-hyuk Kim1; Duck-soo Kang1; Jung-nam Woo1; Xiaopeng Wang1; Zhiguang Liu2; 1Chonbuk National University; 2Harbin Institute of Technology

Mechanical Properties of Consolidate of Nanostructured Niti Alloy by Rapid Sintering: In-Jin Shon1; Na-Ri Kim1; In-Yoong Ko1; Je-Shin Park2; Wonbaek Kim2; 1Chonbuk University; 2Korea Institute of Geoscience and Mineral Resources

Mechanical Strength and Fracture Behavior of Silicon Wafer Based-Solar Cell: Jai-Won Byeon1; Bong-Kul Shin1; Chang-Yong Hyun1; 1Seoul National University of Technology

Mechanical Strength Change of Dissimilar Friction Stir Welded Joint between Al and Mg Alloys by Probe Position Variation: Yoonki Sa1; Hansur Bang2; Heonsun Bang2; Yutaka S. Sato3; Sehoon Yoo1; Changwoo Lee1; 1Korea Institute of Industrial Technology; 2Chosun University; 3Tohoku University

Microstructural Characterization of the Composite AlZnAg Clad Coating on Alfe: S. Casolco1; S. Valdez; 1ITESM-Puebla

Microstructural Weak Links for Spall Damage in Polycrystalline Metals: Leda Wayne1; Pedro Peralta1; Darrin Byler2; Christine Tomforde1; Stephan Digiacomo1; Shima Hashemian1; Heber D’Armas3; Shengnian Luo2; Scott Greenfield2; Robert Dickerson2; Kenneth McClellan2; 1Arizona State University; 2Los Alamos National Laboratory; 3Universidad Simon Bolivar

Microstructure and Formation Mechanical of 3D-Meshy SiC/2Cr13 Composite Interface: Yu Liang1; Ru Hongqiang1; 1Texture of Materials, Ministry of Education, College of Materials and Metallurgy, Northeastern University

Microstructure and Mechanical Properties of Al Based Composite Coatings Produced by the Cold Gas Dynamic Spraying Process: Onur Meydanoglu1; Huseyin Cimenoglu1; Eyup Kayali1; 1Istanbul Technical University

143

Technical Program

Po

ster

s

Microstructure and Phase Evolution of Uranium and Dysprosium Nitrides Formed during Reactive Ball Milling: Brian Jaques1; Daniel Osterberg1; Cole Smith1; Patrick Callahan1; Brian Marx1; Darryl Butt1; 1Boise State University

Microstructure Changes in Primary Recrystallization of Grain-Oriented Silicon Steel by Pulse Current Intermediate Annealing: Lihua Liu1; Qiangqiang Xia1; Wen Shi1; Lijuan Li1; Xueliang Wu1; Qijie Zhai1; Wu Zeng1; 1Shanghai University

Microstructure Components and Mechanical Properties of an Acicular Ferrite Pipeline Steel: Wei Wang1; Yin Shan2; Wei Yan2; Ke Yang2; 1Electric Power Research Institute, Guangdong Power Grid Corporation; 2Institute of Metal Research

Microstructure Development of Silicon Steel Prepared by Near-Rapid Solidification: Xianyong He1; Quanzhi Sun1; Lei Wang1; Qin Peng1; Qijie Zhai1; 1Shanghai University

Microstructures and Four-Point-Bending Fatigue Behavior of Three Kinds of Low-Carbon Steels for Load-Chain Materials: Wei Wu1; Gongyao Wang1; David Huber2; Peter Hogan2; Rodney Reynolds2; Jules Raphael2; Peter Liaw1; 1The University of Tennessee; 2Columbus McKinnon Corporation

Microstructures and Mechanical Properties of AM60B-based Eco-Mg Alloys: Min-Ho Choi1; Dong-In Jang1; Shae K. Kim1; 1Korea Institute of Industrial Technology

Molecular Dynamics Simulation of Au-Rh Precipitates Structure: Peihua Jing1; Hyon-Jee Lee2; Ian Robertson3; Jae-Hyeok Shim4; Brian Writh2; 1Structural Integrity Associates; 2Department of Nuclear Engineering, The University of California; 3Department of Material Science and Engineering; 4Korea Institute of Science and Technology,

Modeling the Effect of the Contact Surface Temperature on the Deformation of an Aluminum Pin During A Wear Test: Mario Rosenberger1; Elena Forlerer2; Carlos Schvezov1; 1Universidad Nacional de Misiones; 2Comisión Nacional de Energia Atómica

Monitoring Particle Pulverization in Composite Silicon Anodes for Lithium Ion Batteries by Acoustic Emission: Kevin Rhodes1; Claus Daniel2; Edgar Lara-Curzio2; Nancy Dudney2; 1University of Tennessee; 2Oak Ridge National Laboratory

Neutron Diffraction Measurements of Residual Stresses in Bent Stainless Steel Pipes: Mihyun Kang1; Wanchuck Woo1; Vyacheslav Em1; Hyoung Seop Kim1; Sun Ig Hong1; Baek-Seok Seong1; Kye Hong Lee1; 1KAERI (Korea Atomic Energy Research Institute)

Numerical Simulation of Alumina Sintering: Mohammed Kadhim1; 1University of Technology

On the Role of Pieirls Stress in the Shock Response of Cubic Metals: Neil Bourne1; 1AWE

Oxidation and Ignition Resistances of AM60B-Based Eco-Mg Alloys: In-Kyum Kim1; Jung-Ho Seo1; Shae K. Kim1; 1Korea Institute of Industrial Technology

Oxidation Behavior of ZrB2-ZrO2 Composites Prepared by Spark Plasma Sintering: Lian Zhang1; Junguo Li1; Jianrong Song1; Huiping Yuan1; Chuanbin Wang1; Qiang Shen1; 1Wuhan University of Technology

Phase Decomposition during Aging in an Al-22wt.%Zn Alloy: Lizbeth Melo-Maximo1; Dulce Melo-Maximo1; Susana Lezama-Alvarez1; Erika Avila-Davila2; Victor Lopez-Hirata1; Orlando Soriano-Vargas1; Jorge Gonzalez-Velazquez1; 1Instituto Politecnico Nacional (ESIQIE); 2Instituto Tecnologico de Pachuca

Plasma-Polymerization of Hexamethylcyclotrisiloxane Using Atmospheric Pressure Dielectric Barrier Discharge: Gi Taek Kim1; Yoon Kee Kim1; 1Hanbat National University

Prediction of Rapid Solidification Nanosize Structure for Aluminium Alloys: S. Valdez1; 1UNAM-ICF

Preparation and Characterization of Nanocrystalline Silver Particles: Burcak Ebin1; Elif Yazici1; Sebahattin Gurmen1; Burak Ozkal1; 1Istanbul Technical University

Preparation of Iridium Fine Particle by the Effect of Grinding Additive, NaCl: Young Jin Kim1; Youngsan Ham1; Jaeryeong Lee1; 1Kangwon National University

Pressurless Sintering of Al2O3-SiC Nano Composites and Effect of Additives on Sintering Temperature: H.R. Rezaie1; 1Iran University of Science and Technology

Process Modeling for Synthesis of Metal Matrix Nanocomposites: Payodhar Padhi1; Biranchi Dash2; 1Hi-Teh Medical College & Hospital; 2Konark Institute of Science & Technology

Producing of Composite Layer of TiO2/Al5083 via Friction Stir Processing: Reza Behnagh1; Mohamm Kazem Besharati2; 1Tehran University; 2Department of Mechanical Engineering, Tehran University

Production of Boron Fiber in a CVD Reactor: Selim Ertürk1; Ismail Duman1; 1Istanbul Technical University

Production of Porous, Intermetallic Titanium Aluminide Reinforced Titanium Matrix Composites by Powder Metallurgy Method: Aydin Bicer1; Eyup Kayali1; Huseyin Cimenoglu1; 1Istanbul Technical University

Production of Titanium Carbide Reinforced Titanium Matrix Composites via Powder Metallurgy Method: Burak Karaduman1; Onur Meydanoglu1; Huseyin Cimenoglu1; Eyup Kayali1; 1Istanbul Technical University

Properties and Performance of Composites Based on Superrefractories Cements: Ilyoukha Nickolai1; Timofeeva Valentina1; 1Academic Ceramic Center

Properties and Rapid Consolidation of Nanostructured Ti from Mechanically Activated Ti and Tih2 By High Frequency Induction Heated Sintering: In-Jin Shon1; Na-Ri Kim1; In-Yong Ko1; Je-Shin Park2; Wonbaek Kim2; 1Chonbuk University; 2Korea Institute of Geoscience and Mineral Resources

Properties and Rapid Consolidation of Nanostructured Tasi2 from Mechanically Synthesized Powder by High Frequency Induction Heating: In-Jin Shon1; Seung-Myoung Chae1; In-Yong Ko1; Jin-Kook Yoon2; Kee-Do Woo1; 1Chonbuk University; 2Korea Institute of Science and Technology

Qualitative Analysis of Temperature Evolution in Railway Brake Disc: Jeongguk Kim1; Sung-Tae Kwon1; Sung Cheol Yoon1; Byung Choon Goo1; 1Korea Railroad Research Institute

Quality and Productivity Improvements for Wire and Cable Industry: Kiran Manchiraju1; 1Southwire Company

Quality Control of the Refining Process at Electron Beam Melting and Development and Implementation of Engineering Support System for Process Modeling and Control: Elena Koleva1; Georgi Mladenov1; Idilia Batchkova2; Kamen Velev2; Vania Vassileva1; Katia Vutova1; 1Institute of Electronics - Bulgarian Academy of Sciences; 2University of Chemical Technology and Metallurgy

Quality of Slab Ingots and Heavy Plates Produced by a 40t ESR Furnace: Xin Geng1; Zhouhua Jiang1; 1Northeastern University

Rapid Consolidation of Nanocrystalline 2Fe-Al2O3 Composite from Mechanically Alloyed Powders by Pulsed Current Activated Sintering: In-Jin Shon1; Dong-Mok Lee1; Na-Ra Park1; Na-Ri Kim1; Je-Shin Park2; Wonbaek Kim2; 1Chonbuk University; 2Korea Institute of Geoscience and Mineral Resources

Rapid Solidification of FeAlCr-B2 Intermetallic Compounds - Microstructure and Mechanical Behavior: Roberto Rodriguez-Diaz1; Julio Juarez-Islas2; Jesus Arenas-Alatorre3; 1Facultad de Quimico-Metalurgica UNAM; 2IIM_UNAM; 3Instituto de Fisica - UNAM

Recovery of Metallic Values from Spent Li Ion Secondary Batteries: Serdar Aktas1; Derek Fray2; Jo Fenstad2; Odna Burheim2; Ercan Acma1; 1Istanbul Technical University; 2University of Cambridge


144

Technical Program

Po

ster

s

Removal of Phosphorus from High-Phosphorus Iron Ores by Selective HCl Leaching Method: Wentang Xia1; Xingyu Chen2; Zhengde Ren1; Ailiang Chen2; Yifeng Gao1; Tongguo Wang1; 1Chongqing University of Science and Technology; 2Central South University

Rhodium Recovery from Spent Rhodium Plating Solutions: Bihter Zeytuncu1; Serdar Aktas1; Hakan Morcali1; Onuralp Yucel1; 1Istanbul Technical University

Rotary Ultrasonic Drilling of Al2O3 Ceramic Material: Naga Prasada Rao Boyalapalli1; Laxminarayana Pappula2; M. Ramulu3; 1Department of Mechanical Engineering, University College of Engineering, Osmania University; 2University College of Technology, Osmania University; 3Department of Mechanical Engineering, University of Washington

Scrap Modified Alloy Design of Wrought Aluminum Alloy: Myoung-Gyun Kim1; 1Research Institute of Industrial Science and Technology(RIST)

SEM Analysis of Worn Carbon Cathodes in Industrial Aluminium Electrolysis Cells: Øyvind Østrem1; Christian Rosenkilde2; 1Norwegian University of Science and Technology; 2Norsk Hydro ASA

Silver Recovery from Silver-Rich Photographic Processing Solutions by Copper: Bihter Zeytuncu1; Hakan Morcali1; Serdar Aktas1; Onuralp Yucel1; 1Istanbul Technical University

Silver Recovery from Waste Radiographic Films Using Different Methods: Hakan Morcali1; Serdar Aktas1; Onuralp Yucel1; 1Istanbul Technical University

Simulation of Dislocation Interaction with Precipitates: Peihua Jing1; Hyon-Jee Lee2; Jae-Hyeok Shim3; Ian Robertson4; Brian Wirth2; 1Structural Integrity Associates; 2Department of Nuclear Engineering, The University of California, Berkeley; 3Korea Institute of Science and Technology; 4Department of Material Science and Engineering, The University of California, Berkeley

Simultaneous Synthesis and Consolidation of Nanostructured Ti-ZrO2 from Mechanically Activated Powders by High Frequency Induction Heated Combustion: In-Jin Shon1; Seung-Myoung Chae1; Je-Shin Park2; Wonbaek Kim2; Kee-Seok Nam3; 1Chonbuk University; 2Korea Institute of Geoscience and Mineral Resources; 3Korea Institute of Materials Science

Sintering Behaviors of ZrC Nanoparticle Dispersed Tungsten Based Composites: MinKyung Kim1; HyunJu Choi1; DongHyun Bae1; 1Yonsei University

Sintering Densification and Microstructural Characterization of Mechanical Alloyed Fe-Mn-Si Based Powder Metal System: Ahmet Söyler1; Burak Özkal1; Leandru Bujoreanu2; 1ITU; 2”Gh. Asachi” Technical University from IASI

Sintering Kinetics of SPS Tungsten and Tungsten-Ceria Cermets: Jeffrey Perkins1; Kyle Knori1; Darryl Butt1; 1Boise State University

Small Punch Creep of Service-Exposed SUS 316 HTB Superheater Tubes of Fossil Boilers: Maribel Saucedo-Muñoz1; Shin-Ichi Komazaki2; Toshiyuki Hashida3; Toru Takahashi3; Victor Lopez-Hirata1; Tetsuo Shoji3; 1Instituto Politecnico Nacional (ESIQIE); 2Muroran Institute of Technology; 3Tohoku University

Some Recent Research Work on the Hot Processing of Engineering γ-TiAl Alloys: Yuyong Chen1; Yanfei Chen1; Shulong Xiao1; Fantao Kong1; Jing Tian1; 1Harbin Institute of Technology

Spark Plasma Sintering of Next Generation Nuclear Materials: Daniel Osterberg1; Jeff Perkins1; Matt Luke1; Brian Jaques1; Michael Hurley1; Darryl Butt1; 1Boise State University

Step-Wise Exothermic Reactions in Cold-Rolled Ni/Al, Ti/Al, and Ta/Al Multilayer Foils: Laszlo Kecskes1; Anthony Roberts1; Nathan Wingate1; Bradley Klotz2; Xiaotun Qiu3; Jiaping Wang4; 1US Army Research Laboratory; 2Dynamic Science Inc; 3Arizona State University; 4Tsinghua University

Structural and Magnetic Properties of Nanocrystalline Fe–Si–Ni Powders Produced by Mechanical Alloying: Maryam Yazdanmehr1; 1Technical University of Delft (TuDelft)

Structural and Morphological Characterization of Composites of Nylon 6/Ferrite NiFe2O4.: daniella bezerra1; Patricia Costa Fernandes1; Taciana Regina De Gouveia1; edcleide Maria araujo1; Ana Cristina Figueiredo Melo Costa1; 1UFCG

Structure and Thermal Oxidation Properties of RuAl and Ru-Al-Ti Alloys Prepared by Mechanical Alloying: Marlène Clisson1; Julie Gaudet1; Lionel Roué1; Daniel Guay1; 1INRS

Study of Metal-Oxide Composites Prepared by Ball Milling and Evaluated as Inert Anodes for Aluminum Production: Sébastien Helle1; Boyd Davis2; Daniel Guay1; Lionel Roue1; 1INRS EMT; 2Kingston Process Metallurgy Inc.

Study on Magnetic-Gravity Combination Separation and Acid Leaching of a High Phosphorus Fine Hematite: Tao Jiang1; Lin Yang1; Yufeng Guo1; 1Central South University

Study on Visible Light Photocatalytic Performance of Nano Tungsten Trioxide: Wu Daoxin1; 1Changsha University of Science and Technology

Surface Treatment of Materials by Low Energy High Current Pulsed Electron Beam under Evaporating Mode: Kemin Zhang1; 1Shanghai University of Engineering Science

Synthesis of Ag/ZnO Nanocomposite Particles by Ultrasonic Spray Pyrolysis Method: Sebahattin Gurmen1; Burcak Ebin1; 1Istanbul Technical University

Synthesis of Nanostructured Materials for High-Voltage, High-Energy-Capacity Cathode of Li-Ion Batteries: Chunhu Tan1; Bob Liu1; Timothy Lin1; 1Aegis Technology Inc.

Temperature and Stress Effects on Cathodic Hydrogen Charging of High-Strength Line-Pipe Steels: John Roubidoux1; F.J. Sanchez1; B. Mishra1; D.L. Olson1; 1Colorado School of Mines

Temporal Evolution of A Ni-Al-Cr Superalloy with a Dilute Ruthenium Addition: Yang Zhou1; Dieter Isheim1; Gillian Hsieh1; David Seidman1; 1Northwestern University

Tensile Deformation Behavior of Zr-Based Bulk Metallic Glass Composite with Different Strain Rate: Kyu-Sik Kim1; Ji-Sik Kim2; Hoon Huh3; Kee-Ahn Lee4; 1Center for Advanced Green Materials Technology, Andong National University; 2Department of Advanced Materials Science and Engineering, Kyungpook National University; 3Department of Mechanical Engineering, KAIST; 4Advanced Materials Science and Engineering, Andong National University

Tensile Failure Analysis of Railway Steels Using Infrared Thermography NDE Technique: Jeongguk Kim1; Sung Cheol Yoon1; Sung-Tae Kwon1; 1Korea Railroad Research Institute

The Effect of Different Heat Treatment Cycles on Controlled Surface Graphitization in CK45 Steel: Ali-Reza Kiani-Rashid1; Yaser Hamedi2; 1Ferdowsi University of Mashhad; 2Sharif University of Technology, Tehran

The Effect of Calcium on Preventing Grain Growth of Al-Zn-Mg Aluminium Alloy: Sung Yong Shim1; Dae Hwan Kim1; Yeong Hwa Kim1; In Sang Jeong1; In Shup Ahn1; Su Gun Lim1; 1K-MEM R&D Cluster, i-Cube Center, Gyeongsang National University

The Effect of Frequency of Microarc Oxidation on Surface Properties of 7075 Aluminum Alloys: Serkan Bozkus1; Murat Baydogan1; Huseyin Cimenoglu1; Sabri Kayali1; 1Istanbul Technical University

The Effect of Polymer Structures, Nanoparticle Loadings and Nanoparticle Surface Treatment on the Dynamic Shear Rheological Behaviors of PolydimethylSiloxane (PDMS): Atarsingh Yadav1; Sameer Pallavkar1; Thomas Ho1; John Zhanhu Guo1; 1Lamar University

The Effects of Nickel in Oxide Layers on the AZ91 Mg Alloys Synthesized by Plasma Electrolytic Oxidation: Dong H. Shin1; Ki R. Shin1; In J. Hwang1; Dong H. Lee1; Bongyoung Yoo1; 1Hanyang University

The Estimation of the Characteristic of Trivalent Chromium Coated Layer According to the Plating Conditions: Beomsuck Han1; Siyoung Sung1; 1Korea Automotive Technology Institute

145

Technical Program

Po

ster

s

The Structure Dependence of Rolling Contact Fatigue Damage around Small Cracks for Tempered Martensitic Steel by Electron Backscatter Diffraction Analysis: Satoshi Morooka1; Yutaka Yamaji1; Osamu Umezawa1; 1Yokohama National University

Thermal Oxidation of Titanium Wires: Tanmay Engineer1; Adriel Apter1; Michael Hurley1; Darryl Butt1; 1Boise State University

Thermal Tensioning during Welding of DP600 Steel Plates: Amir Masoud Akbari Pazooki1; 1TU Delft

Three Dimensional Carbon Nanotube Photovoltaics: Jack Flicker1; Jud Ready2; 1Georgia Insitute of Technology; 2Georgia Tech Research Institute

Thermographic Detection of Artificial Flaws in Polymer Matrix Composite Panel: Jeongguk Kim1; Sung Cheol Yoon1; Jung-Seok Kim1; Hyuk-Jin Yoon1; 1Korea Railroad Research Institute

Transient Oxidation and Grain Boundary Characteristics: Jingxi Zhu1; Laura Fernandez Diaz1; Gordon Holcomb2; Paul Jablonski2; Christopher Cowen2; David Laughlin1; Sridhar Seetharaman1; 1Carnegie Mellon University; 2National Energy Technology Laboratory

Transient Thermal Tensioning during Welding of AISI 316L and DP600 Steel Sheets: Amir Masoud Akbari Pazooki1; 1TU Delft

Transition Metal Oxide-Doped BaTiO3 Thin Films Prepared by R.F. Magnetron Sputtering: W. Z. Chang1; J. P. Chu1; S. F. Wang2; C. H. Wu1; 1National Taiwan University of Science and Technology; 2National Taipei University of Technology

Twinning during the Tensile Deformation of a TWIP Steel: Yongfeng Shen1; Yandong Wang2; Liang Zuo3; Xin Sun1; R. Lin Peng4; 1Pacific Northwest National Lab; 2School of Materials Science and Engineering Beijing Insitute of Technology; 3Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University; 4Department of Mechanical Engineering, Linkoping University

Water Modeling Study on the Behavior of Inclusions in a Gas-Stirred Ladle with Two Tuyere: Shu-guo Zheng1; Xiang-yang Chen1; Jian-dong Hu1; Miao-yong Zhu1; 1Northeastern University


146

IndexA

Aalund, R .......................................................... 114Aaram, S ............................................................. 59Abachi, A ........................................................... 142Abashidze, G ..................................................... 141Abbas, H ........................................................... 112Abbass, M ..................................... 10, 21, 108, 140Abd El-Aziz, A .................................................... 99Abdel-Karim, R ................................................... 91Abdel-Rahman, M ............................................. 140Abdel Al, N ......................................................... 88Abdel Hamid, A .................................................. 90Abdeljawad, F ................................................... 110Abdi, R ............................................................. 142Abdullah, S ......................................................... 36Abe, H ............................................................. 117Abedrabbo, S ....................................................... 75Abel, P ............................................................... 30Abeykoon, A ....................................................... 64Abouie, M ........................................................... 65Abu-Farha, F ..................................................... 132Abuleil, T ............................................................ 99Abunaemeh, M .............................................. 26, 82Acharya, S ........................................................... 91Ackelid, U ........................................................... 59Ackland, G .................................................. 87, 125Acma, E ............................................................. 143Acoff, V............................................................. 114Acosta, A ............................................................. 98Adachi, N ............................................................ 89Adams, B....................................................... 83, 90Adams, D ............................................................ 59Adams, J .............................................................. 70Adams, R............................................................. 31Addessio, F ......................................................... 87Adedokun, S ........................................................ 54Adel Nofal, A .................................................... 129Adeosun, S .................................................... 47, 85Adharapurapu, R ............................................... 131Adhikari, S ........................................................ 103Adland, A .................................................... 58, 139Adler, S ............................................................... 81Afonona, V .......................................................... 10Afteni, M ............................................................. 88Agaogullari, D ............................................. 11, 114Agarwal, A .......................... 14, 30, 49, 67, 86, 103Aghazadeh, J ..................................................... 142Agnew, S .............................. 13, 24, 43, 61, 62, 80, ................... 81, 83, 99, 116, 118, 132, 133Agour, M ........................................................... 129Agrawal, D .......................................................... 29Aguaze, J ............................................................. 63Aguilar, M ........................................................... 88Aguirre, M ........................................................... 49Ahamed, K ........................................................ 131Ahluwalia, R ............................................... 64, 139Ahmad-Bitar, R ........................................... 74, 128Ahmed, A .................................................... 36, 129Ahn, B ......................................................... 33, 89Ahn, D ............................................................. 142Ahn, H ............................................................. 141Ahn, I ............................................. 140, 141, 144Ahn, K ......................................................... 19, 75Aho, K ............................................................. 128Ahuja, S............................................................... 57Ai, X ............................................................. 116Aich, S ......................................................... 49, 57Aikin, R ............................................................... 21Aithal, K .............................................................. 10Ajayan, P ....................................................... 31, 34Akahori, T ........................................................... 95

Akatyeva, K ........................................................ 10Akbari Pazooki, A ............................... 21, 141, 145Akinc, M ..................................................... 66, 131Akiyama, K ......................................................... 73Akpa, O ............................................................. 113Akre, J ............................................................... 11Aksu, S ............................................................. 115Aktas, S ............................................. 141, 143, 144Al-hashani, T ..................................................... 140Al-Jassim, M ................................................. 19, 75Al-Maharbi, M ................................ 32, 33, 99, 107Alamdari, H ......................................................... 39Alankar, A ........................................... 35, 126, 138Alaswad, K .................................................. 54, 129Al Balushi, M ...................................................... 96Albe, K ................................................. 26, 56, 127Albina, J ............................................................ 120Albinmousa, J ..................................................... 80Aldi, J ............................................................. 108Aleksandrov, A .................................................. 108Aleksandrova, V ................................................ 108Alexander, D ....................................................... 89Alexander, M .................................................... 141Alfantazi, A ................................................... 19, 49Alhajeri, S ......................................................... 106Ali, M ............................................................. 129Al Jallaf, M ................................................. 54, 129Allard, B .............................................................. 39Allen, S ............................................................... 85Allen, T ............................. 102, 118, 122, 135, 140Allendorf, M ....................................................... 56Allison, B ............................................................ 16Allison, J ............................................... 43, 49, 132Alman, D ..................................................... 44, 100Al Maqbali, S ...................................................... 36Almer, J ............................. 18, 27, 46, 71, 102, 135Almosilhy, A ....................................................... 66Aloe, M ............................................................... 42Alonso, E............................................................. 68Alptekin, G .......................................................... 62Al Reyami, A ....................................................... 54Alsaran, A ............................................................ 52Alsem, D ............................................................. 77Alterach, M ......................................................... 31Altman, K ............................................................ 73Alvarez, D ........................................................... 66Alves, J ............................................................. 120Alves, T ............................................................. 136Alvin, M ........................................................ 38, 57Alwan, A ............................................................. 21Al Zarouni, A .............................................. 54, 129Amara, H ............................................................. 41Ambrosini, A ....................................................... 56Amini, S ............................................................ 142Amoorezaei, M ................................................... 72An, H ............................................................. 131An, K ............................................................... 27An, S ............................................................. 109Anand, S ............................................................ 140Ande, C ............................................................... 12Anderoglu, O ....................................................... 70Anderson, I ..................... 14, 27, 46, 49, 59, 60, 65, ................. 71, 84, 102, 104, 114, 118, 135Anderson, P ......................................................... 26Anderson, T ......................................................... 74Ando, D ............................................................... 62Ando, K ............................................................... 93Ando, T ....................................................... 85, 103Ando, Y ............................................................. 140Andrews, M ......................................................... 65Andrews, R ......................................................... 34Andriese, M ....................................................... 128

Andros, F........................................................... 130Angioletti-Uberti, S ............................................. 41Angirash, M ........................................................ 36Angoua, B ........................................................... 81Ankem, S..................................................... 85, 103Anklam, T ................................................. 107, 125Annamalai, S ..................................................... 133Anopuo, O ..................................................... 62, 99Anselmo, G ......................................................... 57Antipov, E ......................................................... 126Antolin, N ........................................................... 64Antoniou, A ........................................... 34, 53, 105Antrekowitsch, H ........................................ 17, 128Anyalebechi, P .................................. 25, 44, 63, 82Apel, M ......................................................... 35, 41Apelian, D ........................................................... 49Apisarov, A .......................................................... 72Appaji, A ............................................................. 82Appleby-Thomas, G ............................................ 21Apter, A ............................................................. 145Aracena, A ..................................................... 61, 79Araújo, C ............................................................. 57Araújo, E ........................................... 120, 128, 144Araujo-Moreira, F ............................................. 130Arbegast, W ...................................................... 102Arbel, T ............................................................. 116Ardell, A .............................................................. 98Ardell, J ............................................................. 113Arenas-Alatorre, J ............................................. 143Arens, R ............................................................ 140Ares, A ................................................... 25, 31, 49Arfaei, B ............................................................ 136Argyropoulos, S .................................................. 80Ari-Gur, P .............................................. 10, 30, 130Arkanti, K ........................................................... 54Armendariz, D ................................................... 111Arola, D ............................................................... 73Arroyave, R ........................................... 15, 95, 118Arvanitis, A ....................................................... 111Ashby, M ............................................................. 34Ashtana, A ........................................................... 20Askin, J ............................................................. 110Asta, M ...................................... 12, 22, 41, 60, 79, ............................... 98, 105, 115, 117, 139Astashynski, V .................................................... 67Atamanenko, T .................................................... 56Atambo, D ........................................................... 82Atkin, S ............................................................... 97Atli, K ............................................................. 124Atmeh, M .......................................................... 130Atodaria, I ......................................................... 141Atzmon, M .......................................................... 18Aubry, S ...................................................... 67, 120Averback, R ............................................. 15, 26, 58Avila-Davila, E.................................................. 143Avraham, S .......................................................... 99Ayas, C ............................................................... 45Ayer, R ....................................................... 74, 140Aynibal, F ............................................................ 11Ayoola, W...................................................... 47, 85Azeem, M .......................................................... 135Azhari, C ............................................................. 16Azizi-Alizamini, H .............................................. 12Azuma, H ............................................................ 89

B

Baars, D ............................................................... 48Baated, A ............................................................. 28Babaghorbani, P .................................................. 72Babakhani, A ....................................................... 29Baber, A ............................................................... 97

147

IndexBabu, S ............................................................... 88Bache, M ............................................................. 78Bachmaier, A ....................................................... 89Bachurin, D ......................................................... 14Backhouse, N ...................................................... 96Bacon, D ............................................... 67, 87, 122Badowski, M ..................................................... 111Bae, B ............................................................. 141Bae, D ....................................... 71, 141, 142, 144Bae, G ....................................................... 13, 132Bae, I ............................................................. 133Bae, J ......................................................... 13, 22Baena Murillo, E ............................................... 137Baggash, I ........................................................... 54Bahr, D ........................... 30, 59, 90, 107, 123, 134Bahrami, A .......................................................... 95Bai, G ............................................................... 61Bai, S ............................................................. 140Bai, X ....................................................... 85, 139Baik, S ............................................................. 140Baily, S ............................................................... 34Bainbridge, I ..................................................... 111Baiocchi, F .......................................................... 14Bajaj, D ............................................................... 73Bajaj, S ............................................................... 15Bajvani Gavanluei, A .......................................... 29Bakai, A ............................................................... 18Bakai, S ............................................................... 18Bakavos, D .......................................................... 21Baker, A ............................................................... 42Baker, D ............................................................ 125Baker, F ............................................................... 62Baker, I ........................................... 12, 21, 31, 128Baker, P ............................................................. 111Baker, S ............................................................... 87Baker, W.............................................................. 40Bakshi, D............................................................. 54Bakshi, S ........................................................... 103Balachander, N .................................................... 90Balachandran, P ................................................ 121Balachandran, S ................................................ 124Balakrishnan, A ................................................... 47Balan, P ............................................................... 15Balani, K ........................................................... 125Balasubramaniam, K ......................................... 141Balbuena, P ....................................................... 100Balci, O ............................................................. 114Baldo, P ............................................................. 108Baldock, R ........................................................... 79Balla, V ....................................................... 11, 140Ballard, D ............................................................ 98Ballarini, R .................................................. 45, 103Ballato, J ........................................................... 129Balle, F ............................................................... 35Balogh, L ............................................................. 32Balogun, S ..................................................... 47, 85Balzar, D ........................................................... 101Bambach, M ...................................................... 126Bamberger, M ..................................................... 99Bammann, D ........................................... 24, 27, 43Ban, Y ............................................................... 55Bandhyopadhyay, A ............................................ 73Bandyopadhyay, A ......... 11, 17, 34, 36, 47, 53, 55, ................... 66, 73, 93, 109, 110, 127, 140Bandyopadhyay, N ...................................... 18, 141Banek, M ............................................................. 39Banerjee, J ......................................................... 119Banerjee, R .................... 11, 30, 128, 134, 141, 142Banerjee, S .................................... 11, 73, 110, 140Bang, H ............................................................. 142Bang, J ............................................................... 46Bang, W .................................... 19, 62, 65, 84, 132

Banik, A............................................................... 98Banoth, L ............................................................. 57Banovic, S ........................................................... 35Bansal, R ............................................................. 40Bansiddhi, A ........................................................ 48Banu, M............................................................... 88Bao, L ......................................................... 11, 91Bao, Y ......................................................... 10, 61Bär, M ............................................................. 125Barabash, O ................................................. 85, 101Barabash, R .......................... 13, 26, 27, 46, 48, 64, ................................. 83, 87, 101, 117, 134Baram, M ............................................................ 30Barat, P ............................................................. 137Barbato, C ........................................................... 71Barbee, T ............................................................. 51Barber, R ............................................................. 33Barbosa, N ......................................... 25, 45, 63, 82Barbosa, R ......................................................... 128Barbu, A .............................................................. 82Barkhordarian, G ................................................. 33Barnard, L ......................................................... 122Barnett, M ........................................................... 81Barnett, S ....................................................... 12, 81Barney, E ............................................................. 37Baró, M ............................................................. 127Barone, J ............................................................. 93Barr, G ............................................................. 136Barrado, P .......................................................... 130Barry, J ............................................................... 36Barsoum, M....................................................... 137Barta, M ............................................................ 119Barth, H ............................................................... 73Bartlett, L ............................................................ 44Bartolo, L .......................................................... 121Bartolucci, S ........................................................ 90Baruah, T ............................................................. 64Baserinia, A ......................................................... 42Baskes, M ................................................ 12, 87, 95Basoalto, H .......................................................... 98Bassani, J..................................................... 87, 138Bassler, K ............................................................ 64Bastie, P .............................................................. 68Basu, S ............................................................... 83Batchkova, I ...................................................... 143Batista, R ........................................................... 103Batson, R ............................................................. 99Battaile, C ............... 21, 69, 97, 114, 130, 137, 138Bauer, G .............................................................. 64Baxter, R ....................................................... 35, 92Baydogan, M ......................................... 49, 86, 144Bayles, R ............................................................. 76Bayliss, C ............................................................ 35Bayrak, Y ............................................................ 96Beall, G ............................................................. 137Bearne, G ............................................................ 31Beaudoin, A ......................................................... 12Beaumont, R ....................................................... 95Beausir, B .......................................................... 138Bechtold, K ....................................................... 141Becker, C ................................................. 34, 38, 77Beckermann, C .................................................... 99Bednarcik, J ......................................................... 18Bedrov, D .................................................. 105, 123Beeler, B ........................................................ 87, 95Beer, A ................................................... 13, 62, 81Begam, K .......................................................... 133Behnagh, R .................................................. 92, 143Behuria, R ........................................................... 83Bei, H ......................... 26, 27, 40, 45, 66, 87, 127Beitra, L ............................................................ 117Belin-Ferré, E .................................................... 115

Bell, W ............................................................... 42Bellon, P .................................................. 15, 26, 58Bellou, A ............................................................. 90Belokon’, Y ......................................................... 57Belonoshko, A ..................................................... 50Belova, I ................................................ 14, 15, 105Belt, C ............................................................... 77Ben-Amotz, D ................................................... 123Ben-Artzy, A ......................................... 43, 62, 100Benabed, B ........................................................ 129Benedek, N ........................................................ 105Beneduce Neto, F ................................................ 79Bengtson, A ......................................................... 19Benito Páramo, J ................................................. 69Benjiang, Q ......................................................... 57Bennett, C ......................................................... 116Bennett, J ........................................................... 128Benson, D ............................................................ 21Bentley, J ........................................... 102, 118, 135Benzerga, A ....................................... 20, 64, 87, 88Bequette, D ......................................................... 77Bergen, R ............................................................ 98Bergstrøm, T ....................................................... 74Berkmortel, R ...................................................... 99Bernard, J ............................................................ 80Bernard, S ................................................... 11, 110Berne, X .............................................................. 54Berneder, J .......................................................... 17Bernstorff, S ........................................................ 83Berry, C ............................................................... 49Bertolini, M ......................................................... 20Besharati, M ........................................ 92, 142, 143Bessais, L .......................................................... 142Besser, M .................................................... 27, 114Bettles, C ........................................................... 134Bevington, J ........................................................ 95Beyerlein, I .................. 33, 74, 87, 89, 99, 123, 137Beyerlein, K ........................................................ 83Beygelzimer, Y .................................................... 69Bezerra, D ......................................................... 144Bezerra, E ............................................................ 11Bhadrachalam, P ............................................... 107Bhagat, R ....................................................... 20, 39Bhandhubanyong, P .. 29, 47, 66, 85, 103, 119, 136Bharadwaj, M ...................................................... 57Bharat, S ............................................................ 129Bharathula, A ............................................. 110, 127Bhargava, S ................................................. 34, 126Bhat, R ............................................................... 70Bhat, V ............................................................... 62Bhatt, J ......................................................... 10, 90Bhatta, R ........................................................... 133Bhattacharjee, S .................................................. 10Bhattacharya, J .................................................. 100Bhattacharya, S ................................................... 71Bhattacharyya, D ....................... 34, 67, 86, 89, 118Bhattacharyya, S ................................................. 18Bhavsar, R ................................................. 119, 124Bhesetti, C ........................................................... 14Bi, Y ............................................................... 11Bian, J ............................................................... 44Bian, M ............................................................. 141Bice, D ......................................................... 40, 96Bicer, A ............................................................. 143Bichara, C ........................................................... 41Bieler, T .................... 12, 14, 15, 21, 22, 27, 40, 46, .................... 47, 48, 59, 65, 78, 84, 97, 98, ..................... 102, 114, 118, 130, 135, 136Biener, J .............................................................. 34Biener, M ............................................................ 34Biermann, D ........................................................ 78Bigot, J ............................................................... 96


148

IndexBing, H ............................................................... 23Bing, P ..................................................... 107, 120Bing, X ............................................................. 116Bingert, J ................. 48, 72, 89, 112, 121, 138, 140Birat, J ............................................................... 56Birol, Y ......................................................... 57, 75Birosca, S ...................................................... 13, 78Biswas, A........................................................... 125Bitzek, E ...................................................... 20, 110Bjarno, O ............................................................. 36Bjorn, C ............................................................. 134Blaesing, J ........................................................... 46Blanco, E ....................................................... 23, 79Blank, J ............................................................... 58Blanpain, B ........................................... 25, 98, 104Blasques, J................................................... 54, 129Blattner, C ......................................................... 140Blavette, D .......................................................... 32Blawert, C ..................................................... 43, 61Bleck, W ...................................................... 66, 131Blendell, J ......................................................... 135Bligh, R ............................................................... 35Blumenthal, W .................................................. 134Bm, G ............................................................... 37Bm, S ............................................................... 37Bo, W ................................................... 35, 91, 96Bo, Z ............................................................... 23Boakye, E ............................................................ 90Bodde, S .............................................................. 55Bodhak, S .............................................. 11, 47, 110Boehlert, C ...................................... 27, 90, 96, 116Boehm, R ............................................................ 91Boesenberg, A ................................................... 102Boettinger, W ................................................ 22, 58Böhner, A ............................................................ 52Bojarevics, V ............................................... 80, 116Bokeloh, J ................................................... 60, 127Bollinger, A ......................................................... 87Bolshakov, D ..................................................... 129Bonadiman, R ..................................................... 14Bondarchuk, V .................................................... 58Bonollo, F ......................................................... 114Boopathy, K ........................................................ 93Booth-Morrison, C .............................................. 15Booty, M ............................................................. 75Borbely, A ........................................................... 27Borchardt, G ........................................................ 97Borchers, C ......................................................... 51Bordia, R ............................................... 11, 53, 127Borges, A ............................................................. 54Borges, M ............................................................ 68Borisov, V ......................................................... 129Borkar, T ............................................................. 14Bormann, R ......................................... 78, 100, 130Borodin, O......................................................... 123Borup, R .................................................... 116, 117Borys, S ................................................. 47, 57, 128Bose, S ................. 11, 34, 36, 47, 66, 73, 110, 140Botelho, J ............................................................ 76Böttcher, H ........................................................ 128Böttger, B ............................................................ 35Boucharat, N ............................................... 69, 127Bouche, C ............................................................ 96Boucher, P ........................................................... 36Bouler, J .............................................................. 73Boulianne, R ....................................................... 36Bourell, D .......................................................... 104Bourke, M ................................................. 102, 135Bourne, N .................................................... 21, 143Bouvard, C .......................................................... 43Bouvard, D .......................................................... 29Bouwhuis, B ...................................................... 108

Bouzemmi, W ..................................................... 39Bower, A .............................................................. 46Bowers, R ............................................................ 35Boyalapalli, N ........................................... 141, 144Boyce, B .......................... 20, 25, 33, 40, 59, 77, 93Boyce, D ............................................................. 26Boyer, R ............................................................ 112Boyle, K ........................................................ 43, 63Bozkaya, D .................................................... 48, 66Bozkus, S .................................................... 86, 144Braatz, R ........................................................... 100Bradford, M ......................................................... 26Brady, M ........... 24, 44, 62, 81, 100, 116, 117, 133Braga, P ............................................................... 54Brammer, T ................................................. 66, 131Branco, M ........................................................... 17Brandstetter, S ................................................... 101Brar, H ............................................................. 133Brasileiro, M ....................................................... 11Brennan, S ......................................................... 116Brenner, D ......................................................... 122Brewer, L ....................................... 25, 69, 137, 138Bridge, J .............................................................. 95Briggs, M ............................................................ 85Briggs, T ............................................................ 130Brigmon, R .................................................... 38, 49Brito, M ............................................................. 100Brock, J ............................................................... 46Brocq, M ............................................... 25, 30, 118Broderick, S ........................................................ 79Brodie, G ........................................................... 126Brodu, B .............................................................. 76Broek, S............................................................... 35Bronkhorst, C ............................................ 121, 138Brooks, G ...................................................... 59, 80Brothers, A .......................................................... 55Brown, D ........................... 21, 64, 65, 83, 134, 135Brown, E ............................................................. 97Browne, D ........................................................... 40Bruce, R .............................................................. 76Brundidge, C ............................................... 40, 134Brunelli, M .......................................................... 64Bruner, E ............................................... 31, 38, 125Bruner, L ............................................................. 49Brush, L ............................................................... 75Buchheit, T ................ 26, 45, 64, 83, 101, 117, 134Buchholz, A ......................................................... 74Buchovecky, E .................................................... 46Budai, J ..................................................... 101, 106Budruk, A .......................................................... 123Buehler, M .......................... 16, 34, 40, 83, 93, 103Buehrig-Polaczek, A ..................................... 62, 80Buelters, O .......................................................... 44Buffiere, J ...................................................... 13, 69Buhr, A ......................................................... 42, 77Buirette, C ......................................................... 142Bujoreanu, L ...................................................... 144Bulatov, V ......................................................... 139Bulovic, V ........................................................... 59Bumiller, E ........................................................ 109Bunin, I ............................................................. 128Burakovsky, L ..................................................... 50Burek, M ............................................................. 40Burheim, O ........................................................ 143Burke, P ............................................................... 43Burkes, D ...................................................... 25, 26Burkett, S ............................................................ 84Burns, J ......................................................... 82, 99Busby, J ............................................. 102, 118, 135Buslaps, T ............................................................ 27Buta, D ....................................................... 22, 139Butler, B .............................................................. 70

Butt, D ......... 12, 25, 118, 125, 131, 143, 144, 145Buzunov, V ........................................................ 129Bv, K ............................................................. 120Byeon, J............................................................. 142Byeon, K ........................................................... 103Byler, D ....................................................... 86, 142Byrd, D ............................................................... 59Byun ............................................................. 135Byun, T ....................................................... 25, 102

C

Caballero, F ......................................................... 18Cabrera-Real, H ................................................ 104Cabrera Marrero, J .............................................. 69Caceres, C ........................................................... 99Cady, C ......................................................... 21, 97Cafffarey, M ........................................................ 49Cagin, T ............................................................... 15Cahill, D ...................................................... 19, 120Cahn, J ............................................... 22, 105, 139Cai, J ......................................................... 51, 70Cai, M ................................................... 54, 74, 94Cai, W ............................................... 26, 101, 139Caimei, X ............................................................ 87Cakmak, E ................................................... 27, 135Calderón, H ....................................................... 130Calin, M .............................................................. 89Caliste, D ............................................................. 67Callahan, P .................................................. 50, 143Campbell, A........... 13, 24, 42, 61, 80, 98, 115, 131Campbell, C ...................................................... 119Campbell, D ........................................................ 18Campbell, G ........................................................ 87Campillo, B ....................................................... 142Campillo-Illanes, B ............................................. 11Campion, M ........................................................ 15Canedo, E .......................................................... 136Cang, X ............................................................... 72Cao, A ......................................................... 20, 26Cao, B ............................................................... 51Cao, D ............................................................... 10Cao, F ......................................................... 30, 87Cao, G ..................................................... 104, 133Cao, P ............................................................... 58Cao, Q ............................................................... 37Cao, W ......................................................... 25, 35Cao, X ............................................... 16, 120, 141Cao, Y ............................................................. 106Cao, Z ................................................... 12, 53, 94Capdevila-Montes, C .......................................... 57Capolungo, L ......................................... 74, 83, 137Caputo, G ............................................................ 10Carcea, A ........................................................... 102Cardona, C .......................................................... 38Cardoso, I ...................................................... 14, 77Carle, D ............................................................. 112Carlson, B ........................................................... 31Carmichael, C ..................................................... 29Caro, A ................................................. 12, 26, 125Caro, M ............................................................. 107Caron, A ...................................... 93, 110, 127, 128Caron, F............................................................... 74Carpenter, C ................................................ 45, 140Carpenter, R .................................................. 53, 90Carre, A ............................................................... 35Carreno, F ........................................................... 89Carreon, H ........................................................... 57Carson, B........................................................... 114Carter, J ......................................... 13, 62, 116, 132Carter, W ............................................................. 48Caruthers, J ....................................................... 105

149

IndexCarvajal, M ....................................................... 123Casolco, S ................................................... 96, 142Cassano, T ......................................................... 128Castañeda, H ....................................................... 96Castro, M............................................................. 92Castro, W ............................................................ 57Castro-Ceseña, A ................................................. 55Castro-Colin, M .................................................. 64Caton, M ............................................................. 44Cavalcante, D ...................................................... 11Cavallaro, G ...................................................... 101Cawkwell, M ................................................. 68, 83Cawthorne, S ....................................................... 12Cebeci, D ........................................................... 123Ceder, G .............................. 22, 41, 60, 79, 98, 115Celikin, M ........................................................... 62Celine, V ............................................................. 98Cerreta, E .............................................. 21, 87, 131Cerri, E ............................................................... 17Certain, A .......................................................... 102Cesta, T ............................................................. 111Cetinel, S ............................................................. 17Cetlin, P ............................................................... 88Cha, D ......................................................... 16, 34Cha, P ............................................................. 140Cha, W ............................................................... 21Chada, S ............................................ 28, 47, 65, 84Chae, S ..................................................... 143, 144Chai, L ............................... 12, 104, 107, 120, 137Chaim, R ..................................................... 85, 136Chaka, A .............................................................. 45Chakrabarti, S ..................................................... 47Chakraborty, M ................................................... 57Chakravarthy, S ................................................. 101Chakravartty, J .................................................... 33Challa, A .............................................................. 53Chamarthy, S ..................................................... 139Champagne, D ..................................................... 92Champoux, P ....................................................... 36Chan, E ............................................................... 51Chan, H ............................................................. 124Chan, L ............................................................... 32Chan, S ............................................................... 74Chan, V ............................................................... 50Chan, W .............................................................. 95Chandler, R ....................................................... 127Chandrasekar, S .................................. 15, 107, 140Chandrasekaran, S ............................................... 48Chandross, M ................................................ 32, 83Chang, C ........................................................... 118Chang, H ............................................................. 56Chang, J............................................................... 84Chang, S ........................................................ 52, 70Chang, W .......................................................... 145Chang, Y...................................... 10, 35, 40, 47, 62Chang-chun, X .................................................... 72Chanturiya, V .................................................... 128Chao, J ....................................................... 57, 102Chappell, D ......................................................... 38Chari, A ............................................................... 95Charit, I ............... 25, 26, 45, 82, 85, 108, 118, 135Chartrand, P .................................................. 39, 81Chason, E .............................................. 46, 57, 136Chasse, K .......................................................... 131Chateigner, D ...................................................... 27Chattoraj, I ........................................................ 121Chaudhari, G ............................................... 51, 132Chaudhary, R ....................................................... 24Chawla, K ........................................................... 90Chawla, N ....................... 16, 47, 90, 103, 119, 123Chbihi, A ............................................................. 32Che-Ming, C ..................................................... 140

Cheah, W ........................................................... 139Cheeseman, B ................................................... 122Chelikowsky, J .................................................... 19Chelliah Machavallavan, N ................................. 46Chen, A ..................................................... 124, 144Chen, B ..................................................... 114, 135Chen, C ......... 28, 46, 47, 50, 65, 84, 119, 136, 142Chen, D ............................................................... 11Chen, E ................................................... 40, 88, 96Chen, G ....................................................... 66, 127Chen, H ....................... 54, 66, 74, 78, 81, 132, 136Chen, I ......................................................... 55, 66Chen, J ..................................... 25, 55, 81, 97, 136Chen, K .......................... 25, 26, 47, 56, 63, 65, 70, ....................... 84, 100, 103, 121, 130, 140Chen, L .......................... 10, 18, 37, 44, 48, 92, 95, ....................... 98, 100, 105, 113, 129, 136Chen, M........................................... 18, 56, 73, 137Chen, O ............................................................. 132Chen, P ........................................... 36, 55, 93, 113Chen, R ............................................................... 14Chen, S ................................ 28, 35, 47, 48, 50, 65, ................... 84, 87, 92, 102, 119, 128, 135Chen, T ............................................. 109, 111, 112Chen, W ............................ 41, 58, 65, 96, 103, 136Chen, X ..................... 11, 39, 72, 79, 102, 144, 145Chen, Y ..... 12, 14, 28, 37, 47, 68, 69, 70, 103, 144Chen, Z ......................... 21, 95, 114, 116, 122, 140Chenelle, B .................................................... 21, 96Cheng, J............................................................. 127Cheng, S ...................................................... 83, 135Cheng, Y.............................................................. 47Chepushtanova, T ................................................ 63Cherif Idrissi El Ganouni, O ............................... 96Cherng, S........................................................... 136Chernovich, I ....................................................... 67Chertkov, G ......................................................... 47Cheung, K ......................................................... 124Chevy, J ............................................................... 68Chiang, T ............................................................. 64Chianng, T ........................................................... 46Chiba, A................................................. 89, 95, 141Chi Chung, N .................................................... 114Chidambaram, V ............................................... 102Chikhradze, M ........................................... 125, 142Chikhradze, N ................................... 125, 141, 142Chin, K ............................................................. 140Chinella, J ..................................................... 17, 35Chitrada, K .................................................. 82, 118Chiu, C ............................................................... 24Chiu, T ............................................................. 136Chiu, Y ......................................................... 28, 65Chmelar, J ................................................... 96, 126Cho, H ............................................... 30, 103, 117Cho, J ....................................................... 70, 103Cho, K ..................................... 13, 33, 92, 97, 140Cho, M ......................................................... 28, 85Cho, S ............................................................... 24Choe, H ............................................................... 84Choe, K ............................................................. 140Choi, C ............................................................... 84Choi, D ....................................................... 91, 133Choi, G ............................................................. 117Choi, H ........................................... 46, 71, 84, 144Choi, J ............................................... 12, 100, 131Choi, M ....................................................... 23, 143Choi, S ....................................... 63, 115, 140, 141Choi, W ................................................. 14, 68, 107Choi, Y ......................................... 57, 59, 106, 118Chokshi, A ........................................................... 97Chongstitvattana, P ........................................... 103

Choo, H ...................................... 18, 27, 37, 55, 69, ........................... 73, 83, 93, 110, 127, 135Chopra, N .............. 10, 16, 34, 53, 70, 90, 107, 125Chou, M ............................................................ 100Chou, T ............................................................. 103Chou, Y ............................................................... 48Choudhary, B ...................................................... 63Choudhuri, D....................................................... 84Choudhury, S ..................................................... 122Christodoulou, J .................................................. 22Christodoulou, L ................................................. 22Chrzan, D .............................................. 45, 59, 122Chu, J ............................. 37, 66, 67, 93, 110, 145Chu, K ............................................................... 75Chu, M ............................................................... 21Chua, A ............................................................. 105Chuang, A ............................................................ 18Chuang, C ........................................................... 37Chuang, H ........................................................... 14Chuang, T ............................................................ 46Chulist, R ............................................................ 69Chumbimuni-Torres, K ....................................... 36Chumbley, S ........................................................ 60Chun, D ............................................................... 63Chun, I ............................................................... 53Chun, S ....................................................... 47, 133Chun, Y ............................................................... 99Chung, H ........................................................... 119Chung, J ............................................................ 136Chung, P ...................................................... 86, 139Chung, Y ............................................................. 66Churaman, W ...................................................... 34Ci, L ............................................................... 31Cicero, G ........................................................... 117Ciftja, A ............................................................... 30Cimenoglu, H ........................ 49, 86, 142, 143, 144Cipriano, P ........................................................ 136Ciulik, J ............................................................... 29Cizek, J ............................................................... 88Cizer, Ö ............................................................. 104Clark, J ............................................................. 111Clark, M .............................................................. 58Clarke, R ........................................................... 134Claudel, P ............................................................ 96Clausen, B ............................................. 64, 83, 134Clement, P ........................................................... 54Clemente, A ....................................................... 111Clisson, M ......................................................... 144Clos, R ............................................................... 46Clouet, E ....................................................... 14, 50Cloutier, B ........................................................... 35Coakley, J ............................................................ 98Cocco, M ........................................................... 114Cochran, J ........................................................... 48Cockayne, E ...................................................... 121Cockcroft, S .................................................. 42, 95Cocke, D ..................................... 82, 103, 136, 137Cockeram, B ........................................... 29, 48, 66Coffey, K ........................................................... 116Coker, E .............................................................. 56Colakoglu, C ....................................................... 82Colanto, D ........................................................... 85Colás, R ............................................................. 106Cole, J ............................................... 82, 118, 135Cole, K ............................................................... 90Colliex, C ............................................................ 30Collins, D .......................................................... 135Collins, G ................................................ 12, 41, 95Collins, J ............................................................. 20Collins, P ........... 11, 12, 39, 50, 124, 136, 137, 142Colmenares, M .................................................. 109Colorado, H ....................................................... 114


150

IndexComer, M ...................................................... 50, 88Compton, C ......................................................... 48Cong, D ............................................................... 65Conklin, B ........................................................... 57Conner, D ............................................................ 18Conrad, E ............................................................ 46Contescu, C ......................................................... 62Cook, D ....................................................... 91, 132Cook, R ............................................................... 77Cooksey, M ................................................... 77, 92Cooley, J ............................................................ 101Cooper, C ............................................................ 67Cooper, K .......................................................... 130Coppack, J ......................................................... 113Coral-Escobar, E ................................................. 10Cordill, M ............................................................ 59Corlu, B ............................................................. 111Cornwell, J .................................................. 91, 130Corona, E ............................................................ 59Cortes, N ........................................................... 130Coryell, S ............................................................ 98Costa, J ............................................................... 14Costa, L ................................................... 11, 94, 95Costine, A ............................................................ 54Côté, P ............................................................... 36Cotts, E ..................................................... 119, 136Coulombe, M ...................................................... 39Coulombe, R ..................................................... 112Coulter, K ............................................................ 62Counts, W .................................................... 19, 113Courtenay, J ................................................. 56, 128Couvrat, M .......................................................... 25Cowen, C............................................. 44, 100, 145Cox, A ............................................................... 29Cox, M ............................................................... 53Cozzoli, D ........................................................... 10Cranford, S ........................................................ 103Craps, M ............................................................ 104Creuziger, A ...................................................... 134Crimp, M ....................................................... 15, 97Croft, M............................................................... 30Croft, N ............................................................... 61Croft, T ............................................................. 116Crooks, R ............................................................ 12Cross, M ...................................................... 61, 116Crossa Archiopoli, U ........................................... 18Crouse, C............................................................. 16Cserhati, C ........................................................... 67Csik, A ............................................................... 67Csontos, A ......................................... 102, 118, 135Cui, H ......................................................... 10, 11Cui, J ......................................................... 74, 94Cui, Y ............................................................... 76Cunningham, N ................................................. 118Cupid, D ........................................................ 13, 40Currano, L ........................................................... 34Curtarolo, S ......................................................... 79Curtin, W ..................................... 87, 101, 123, 137Cuvilly, F ............................................... 25, 30, 118

D

D’Armas, H ....................................................... 142Da Costa, G ......................................................... 48Dadfarnia, M ....................................................... 87Daehn, G ............................................. 88, 114, 130Daemen, L ........................................................... 47Dahlman, A ................................................. 37, 110Dahlman, J .......................................................... 37Dahmen, U .......................................................... 67Dahotre, N ............................. 14, 30, 49, 61, 67, 86Dai, Q ............................................................... 54

Dai, Y ....................................................... 25, 141Daivis, P .............................................................. 83Dalili, N ............................................................... 14Damaskin, A ........................................................ 71Damoah, L ......................................................... 127Damodaran, A ..................................................... 58Dan, L ............................................................. 112Dandeneau, C .................................................... 104Dando, K ........................................................... 126Dando, N ............................................... 35, 36, 126Daniel, B ........................................................... 132Daniel, C ..................................... 49, 113, 133, 143Daniil, M ................................... 106, 107, 125, 129Danoix, F............................................................. 11Danoix, R ............................................................ 11Dantas, A ............................................................. 10Dantzig, J ............................................................ 64Daoxin, W ......................................... 107, 112, 144Daphalapurkar, N ................................................ 51Darbandi, P .......................................................... 48Dargusch, M ...................................................... 124Darling, K ..................................................... 33, 70Darsell, J ..................................................... 44, 116Das, G ............................................................... 38Das, K ....................................... 82, 113, 117, 136Das, S ................................ 10, 17, 31, 35, 40, 54, ................... 57, 72, 91, 109, 111, 121, 128Das Gupta, R ....................................................... 16Dasgupta, S ....................................................... 126Dash, B ............................................................. 143Dashwood, R ................................................. 20, 39da Silva, A ........................................................... 11Da Silva, D ........................................................ 120Dattelbaum, D ............................................. 97, 123Dauskardt, R ..................................... 20, 40, 59, 77Daveau, G ......................................................... 102Davey, J ............................................................. 117David, S............................................................... 36Davidchack, R ..................................................... 75Davies, C ....................................................... 32, 99Davila, J .............................................................. 49Davis, B..................................... 13, 24, 76, 81, 144Davis, C............................................................... 87Davis, M .............................................................. 54Dawson, P ........................................................... 26Daymond, M ............................................... 27, 135De, P ......................................................... 33, 77Deal, A ............................................................... 70Dean, J ............................................................... 20Dean, M ............................................................. 127DeAngelis, R ................................................. 48, 89Debnath, M ................................................... 67, 86de Carlo, F ......................................................... 123de Carvalho, L ................................................... 136Decker, R .......................................................... 116Dedrick, D ........................................................... 56Dedyukhin, A ...................................................... 72Deepak ............................................. 103, 129, 132De Fontaine, D .................................................... 22De Gouveia, T ................................................... 144De Graef, M .................................... 11, 50, 74, 123Dehghani, K .................................. 10, 54, 109, 125Dehm, G .............................................................. 59DeHoff, R ............................................................ 38De Hosson, J .............................. 14, 30, 31, 50, 68, ....................................... 87, 105, 122, 138De Hoyos, S ...................................................... 130Dehui, C ...................................................... 68, 108Deibler, L .......................................................... 110Delagnes, D ......................................................... 11Delahanty, T ........................................................ 33De la Rosa, J ..................................................... 142

Delette, G ............................................................ 77Del Genio, C ....................................................... 64de Lima, O ........................................................ 130DellaCorte, C ...................................................... 30Della Corte, E .................................................... 114DeLorme, R ................................................... 13, 81Delorme, R .......................................................... 13Delplanque, J ........................................... 25, 75, 97DelRio, F ............................................................. 77DeLucca, J ........................................................... 14DeMange, P ....................................................... 125Demetriou, M ................................................ 55, 93DeMint, A ............................................................ 25Demircan, O ........................................................ 81Demirci, K ........................................................... 75Demirhan, O ........................................................ 11Demkowicz, M .............. 30, 45, 48, 67, 85, 86, 120Demura, M .......................................................... 63Deng, G ............................................................... 15Deng, J ............................................... 64, 123, 131Dengfu, C .................................................... 25, 142Dengke, Z .......................................................... 141Dennis, K .......................................................... 104Denoirjean, A ...................................................... 64Deo, C ................................................. 87, 95, 122de Oliveira, S .................................................... 120DePari, L ............................................................. 43Depree, N ............................................................ 97Deqing, Z ............................................................ 23Dera, P ............................................................... 26Derezinski, S ....................................................... 43Dernell, W ........................................................... 11Desai, S ............................................................... 85Desai, V ............................................................... 10Deshmukh, V ...................................................... 92DeSilva, J ............................................................ 20De Silva, L .......................................................... 71De Souza, D ...................................................... 120Deutchman, H ..................................................... 97Deutsch, T ........................................................... 19Devanathan, R ................................................... 125Devaraj, A ................................................... 11, 142DeVasConCellos, P ..................................... 11, 110Devincre, B ......................................... 68, 102, 138DeVoe, K ............................................................. 11Dewulf, W ........................................................... 86Dey, G ............................................................. 104Dhanabalan, A ................................................... 141Dheda, S ............................................................ 125Dheeradhada, V ................................................. 131Diaz, S ............................................................... 36Diaz-Ortiz, A ................................................. 22, 23Dick, A ................................................... 14, 15, 79Dickerson, P .......................................... 34, 67, 118Dickerson, R ............................................. 114, 142Dickinson, M....................................................... 93DiDomizio, R ...................................................... 70Didomizio, R ....................................................... 70Dieringa, H .......................................................... 62Diffoot-Carlo, N .................................................. 11Digiacomo, S ..................................................... 142Dillion, S ............................................................. 32Dillon, Jr., O ...................................................... 133Dillon, S .............................................................. 48di Michiel, M ...................................................... 27Dimiduk, D ........................... 45, 59, 106, 123, 138Dimitrovska, A .................................................... 14Ding, F ............................................................. 122Ding, H ............................................................... 73Ding, M ............................................................. 102Ding, R ............................................................... 78Ding, S ............................................................... 55

151

IndexDing, W ................................................... 24, 80, 81Ding, Y ............................................................... 26Dingreville, R .............................................. 69, 138Dinsdale, A .......................................................... 85Dippenaar, R ..................................................... 102Dittrick, S ............................................................ 11Diver, R ............................................................... 56Divinsky, S .......................................................... 69Dixit, V ......................................... 11, 50, 124, 137Djambazov, G ..................................................... 24Dlouhy, A .................................................... 71, 138Dmowski, W ................................................. 18, 37Do, K ..................................................... 140, 141Dobatkin, S ................................................... 51, 52Dobosz, R ............................................................ 88Doernberg, E ....................................................... 78Dogan, O ............................................................. 48Dohner, A ............................................................ 31Doiron, P ........................................................... 126Domgin, F ........................................................... 24Donati, L ..................................................... 54, 109Donchev, A ........................................................ 113Dong, C ............................................................. 142Dong, J ....................................................... 80, 126Dong, L ............................................................. 106Dong, T ............................................................... 66Dong, Y ............................................................... 61Donner, W ........................................................... 64Dopita, M ............................................................ 88Dotson, M ........................................................... 23Dou, Z ......................................... 11, 91, 140, 141Doughty, G .......................................................... 20Doutre, D ........................................................... 128Downey, J .......................................... 23, 42, 60, 79Doyle, F................. 13, 24, 42, 61, 80, 98, 115, 131Drabble, D ........................................................... 97Drautz, R ......................................... 23, 31, 50, 122Drelich, J ..................................... 23, 37, 42, 60, 79Dreyer, C ............................................................. 43Dreyssé, H ........................................................... 79Drezet, J .............................................................. 42Dring, K .............................. 20, 39, 58, 76, 95, 112Driscoll, K ........................................................... 31Driver, K ........................................................... 122Druschitz, A ......................................................... 35Druschitz, E ......................................................... 35Dryepondt, S ....................................................... 44Du, J ....................................................... 53, 130Du, Q ............................................................... 41Duan, Z ....................................................... 12, 106Dubey, D ............................................................. 73Dubey, S ........................................................ 75, 86Dubois, J ........................................................... 115Ducastelle, F ....................................................... 41Duchene, L .......................................................... 88Duchêne, L .......................................................... 88Duchesne, C ...................................................... 129Dudek, M .......................................................... 123Dudney, N ......................................... 100, 113, 143Duflou, J .............................................................. 86Dufour, G ............ 35, 36, 54, 72, 92, 109, 126, 129Dugger, M ........................................................... 77Duh, J ...................................... 14, 27, 46, 47, 65, ............................... 84, 102, 118, 119, 135Dulyapraphant, P ................................................. 10Duman, I ............................................. 11, 114, 143Duman, S............................................................. 53Dumas, R........................................................... 125Dumortier, P ........................................................ 35Dunand, D .................................. 10, 16, 17, 34, 41, ....................... 48, 53, 69, 71, 90, 108, 112Duncan, K ........................................................... 81

Dundar, M ......................................................... 111Dupas, N ............................................................. 36Dupuis, C ............................................................ 74Dupuis, M ........................................................... 92Durgamahanty, S ................................................. 34Durst, K ......................................................... 93, 97Dursun, A .......................................................... 111Duscher, G .......................................................... 67Dutrizac, J ......................................................... 112Dutta, B ............................................................. 133Dutta, I ......................................... 28, 46, 102, 118Dutta, S ............................................................. 102Dutta, T ............................................................. 130Dutta Majumdar, J ................................... 49, 67, 86Dutton, R ............................................................. 22Duval, P ............................................................... 68Duygulu, O ................................................ 111, 116Duz, V ............................................................... 39Dye, D ............................... 20, 27, 39, 78, 98, 135Dzieciol, K .......................................................... 27

E

Earthman, J ................................................. 70, 127Easter, S ............................................................ 116Eastman, J ........................................................... 46Easton, M ................................................ 62, 78, 99Ebacher, V ........................................................... 73Ebel, T ............................................................. 130Ebeling, T .......................................................... 100Ebin, B ............................................. 140, 143, 144Ebrahimi, F ................................................... 13, 40Echeverría, M ...................................................... 10Echlin, M ........................................................... 123Eckart, D ............................................................. 91Eckert, J ......................... 18, 41, 48, 55, 73, 89, 120Eckert, S .............................................................. 24Edagawa, K ................................................. 14, 122Edalati, K .................................................... 32, 107Edwards, P ........................................................ 112Edwin, I ............................................................... 63Efrem, V .............................................................. 21Efstathiou, C ....................................................... 26Egami, T .......................................... 18, 50, 87, 110Eggeler, G ....................................... 11, 71, 95, 138Ehrke, J ............................................................... 17Eichlseder, W ...................................................... 61Eick, I ............................................................. 126Eifler, D ................................................. 35, 37, 132Eiken, J ............................................................... 41Eisenlohr, P ................................................... 15, 97Eizenberg, M ....................................................... 66Ekerim, A ............................................................ 96Ekuma, C ........................................................... 128El-Awady, J ......................................................... 45El-Azab, A ......................... 63, 64, 75, 86, 123, 131El-Aziz, A ............................................................ 91El-Bitar, T............................................................ 66El-Dasher, B ...................................................... 107El-Demellawy, M .............................................. 114El-Desouky, A ..................................................... 52El-Kaddah, N .................................................... 116El-Khodary, K ................................................... 122El-Shabasy, A .................................................... 141Elam, J ............................................................... 38Elangovan, S ....................................................... 56Elder, K ............................................................... 98Eldin Raged, M ................................................... 90Elhami-Khorasani, A ......................................... 107Elie-dit-Cosaque, X ........................................... 130Elkadi, Y........................................................ 20, 98El Kadiri, H ................................................... 43, 80

Elsaesser, C ................................................. 50, 120Elsamadicy, A ...................................................... 26Elsayed, F ............................................................ 99Elshan, E ........................................................... 142Elstnerova, P ....................................................... 55Elting, D ............................................................ 137Elton, J ....................................................... 91, 130Em, V ............................................................. 143Emadi, D ........................................................... 142Emadi, R ............................................................. 90Emery, J ............................................................. 137Emmerich, H ............................... 22, 41, 48, 60, 78Ene, C ............................................................... 30Engelbrecht, A ............................................. 60, 127Engh, T ............................................................... 30Engineer, T ........................................................ 145England, L ........................................................... 20Enser, J ............................................................... 17Entelmann, W ...................................................... 24Entemeyer, D ...................................................... 29Epureanu, A ......................................................... 88Erdemir, A ........................................................... 30Erdeniz, D ........................................................... 85Erdogan, M ......................................................... 40Erdogan, R ........................................................ 111Erfanfar, A ......................................................... 142Erinc, M ............................................................ 133Ertorer, O .............................................. 15, 51, 107Ertürk, S ............................................................ 143Eruslu, N ........................................................... 142Esaka, H ........................................................ 14, 32Eskin, D............................................................... 56Esmaeili, S .................................................. 35, 116Espana, F ....................................................... 34, 66Esper, F ............................................................... 10Essadiqi, E ........................................... 63, 100, 116Esteves-Alcazar, F............................................... 11Estevez, F .......................................................... 117Estournes, C ...................................................... 136Estrin, Y .......................................... 24, 52, 64, 124Etienne, A .................................................. 107, 135Euh, K ....................................................... 92, 120Evans, A ...................................................... 42, 134Evans, G .............................................................. 80Evans, J ......... 16, 17, 80, 92, 97, 99, 115, 116, 127Evans, M ........................................................... 108Evans, N .............................................................. 44Evcimen, N ......................................................... 96Everett, R ............................................................ 74Evteev, A ....................................................... 14, 15Eyckmans, J ...................................................... 104

F

Faber, K ............................................................... 46Fabritius, H ......................................................... 55Fafard, M ............................................................. 39Fahringer, R ...................................................... 106Fair, G ............................................................... 90Fan, J ............................................................... 55Fan, L ............................................................... 65Fan, X ............................................................... 79Faney, T ............................................................. 108Fang, J ............................................................... 10Fang, S ............................................................... 76Fang, Z ............................................................... 76Farahany, S .......................................................... 72Faraji, M .............................................................. 18Fardeau, S ......................................................... 109Faris, A ............................................................. 140Farkas, D ..................................... 26, 115, 122, 138Farmer, J ............................................ 107, 108, 125


152

IndexFarrow, A ............................................................. 21Farzadfar, A ....................................................... 100Fathi, M ......................................................... 19, 49Fathi Doost, H ..................................................... 37Fauchais, P .......................................................... 64Favez, D ........................................................ 42, 95Favilla, P ............................................................. 31Faxin, X......................................................... 68, 86Fechner, D ........................................................... 43Fecht, H ..................... 51, 55, 69, 93, 110, 127, 128Fedyaev, A ........................................................... 54Fei, H ............................................................... 47Fei, N ............................................................... 86Fei-Shuo, H ....................................................... 140Fei-Yi, H ..................................................... 70, 140Fein, A ............................................................... 24Felicelli, S ..................................................... 27, 63Fell, D ............................................................... 38Fenbin, L ........................................................... 131Fencl, J ............................................................... 95Feng, C ............................................................... 76Feng, L ....................................................... 82, 122Feng, Q ............................................................... 10Feng, R ....................................................... 26, 102Feng, Y ............................................................... 92Feng, Z ..................................... 21, 27, 66, 85, 101Feng-qi, D ........................................................... 72Fensin, S ............................................................ 105Fenstad, J........................................................... 143Fergus, J ............................................................ 100Ferguson, J .................................................. 46, 112Fernandes, P ...................................................... 144Fernandes, V ..................................................... 136Fernandez Diaz, L ..................................... 100, 145Ferreira, A ........................................................... 94Ferreira, H ........................................................... 11Ferreira Neto, J .................................................... 79Ferri, O ............................................................. 130Ferris, K .............................................................. 13Ferry, M ............................................................. 135Fertig, R ...................................................... 87, 108Feuerstein, J ........................................................ 73Fevre, M .............................................................. 98Fiedler, T ........................................................... 105Field, D ............. 35, 38, 72, 92, 107, 125, 126, 138Field, F ......................................................... 31, 68Field, K ............................................................. 102Fielitz, P .............................................................. 97Figueiredo, R ......................................... 88, 89, 106Figueiredo Melo Costa, A ................................. 144Filidore, A ........................................................... 71Filipiev, R .......................................................... 109Finch, J ............................................................... 12Findley, K ............................................................ 98Fine, M ......................................................... 65, 66Finel, A ............................................................... 98Finger, I ............................................................. 119Fink, M ............................................................... 78Finklea, H ............................................................ 81Finnis, M ..................................................... 41, 105Fiory, A ............................................................... 75Fiot, L ............................................................... 54Firrao, D .............................. 18, 21, 37, 57, 67, 112Fischer, F ............................................................. 59Fischer, M ......................................................... 131Fister, T ............................................................... 46Fjeld, A ............................................................... 61Flandorfer, H ..................................... 28, 47, 65, 84Flater, P ......................................................... 48, 89Fleer, M ............................................................... 35Flicker, J ...................................................... 16, 145Fliflet, A............................................................... 76

Floey, D ............................................................... 99Flom, Z ............................................................. 123Flores, K .............. 18, 37, 67, 73, 78, 110, 127, 136Flores-Garcia, J ........................................... 90, 114Floyd, N ............................................................ 122Fluss, M............................................................. 107Foecke, T ..................................................... 35, 134Foiles, S................................... 12, 26, 38, 105, 139Foley, D ........................................... 32, 33, 99, 107Foley, R ............................................................... 35Foltz, J ............................................................... 12Fonda, R .................................................. 21, 69, 74Fong, D ......................................................... 46, 84Fong, H ......................................................... 17, 73Fonseca, P ......................................................... 134Fook, M ............................................................. 120Forbes Jones, R ................................................. 124Forcade, R ........................................................... 23Forde, N .............................................................. 93Forlerer, E ......................................................... 143Fornell, J ........................................................... 127Forsik, S .............................................................. 63Forsmark, J ........................................................ 132Forsyth, R .......................................................... 114Fortier, M .......................................................... 140Forwald, K .......................................................... 42Foster, B .............................................................. 73Foulk, J ............................................................... 77Fox, D ............................................................. 112Fox, S ......................................................... 42, 95Fragoudakis, R .................................................... 44Franca, S ............................................................. 54França, S ..................................................... 71, 120Frank, R............................................................. 140Franke, M ............................................................ 60Franke, O ....................................................... 93, 97Franklin, J ........................................................... 72Franz, H ............................................................... 18Frary, M ................................... 25, 32, 82, 118, 138Fraser, H ....................... 11, 12, 30, 39, 50, 59, 124, ............................. 128, 136, 137, 141, 142Fray, D ..................... 16, 20, 29, 58, 115, 128, 143Free, M ......................................................... 23, 39Freeman, A .......................................... 41, 122, 138Freitas, I .............................................................. 77Fressengeas, C ....................................... 29, 68, 138Freund, J ............................................................ 117Friak, M............................... 14, 41, 48, 50, 55, 113Frick, T ............................................................... 44Fried, L ............................................................. 115Friedman, L ....... 26, 45, 64, 83, 101, 117, 121, 134Fries, S ......................................................... 60, 95Froes, F ............................... 20, 39, 58, 76, 95, 112Froger, M ............................................................ 84Frolov, T .......................................... 12, 38, 48, 139Frost, L ............................................................... 56Fu, B ............................................................... 48Fu, E ............................................................... 85Fu, H ............................................................. 103Fu, W ............................................................... 35Fuchs, B .............................................................. 11Fuerst, C .............................................................. 81Fuerst, J ............................................................. 112Fugetsu, B ........................................................... 71Fujihara, K .......................................................... 93Fujita, K .............................................................. 73Fukuda, H ............................................................ 61Fukusumi, M ..................................................... 142Fullwood, D ............................................ 83, 88, 90Fultz, B ............................................. 12, 41, 60, 95Fuoss, P ............................................................... 46Furár, I ............................................................... 30

Furrer, D ...................................................... 78, 114Furu, E ............................................................... 59Furu, J ............................................................... 74Furuhara, T .......................................................... 88Furuta, T .............................................................. 33Fuwa, A ..................... 29, 47, 66, 85, 103, 119, 136Fyhrie, D ............................................................. 93

G

Gabb, T ............................................................. 114Gabbitas, B .......................................................... 58Gagne, J ............................................................... 36Gaies, J ............................................................... 17Gaikwad, A ........................................................ 115Gaines, L ............................................................. 68Gaither, M ........................................................... 77Gajjala, G .......................................................... 125Gakwaya, A ....................................................... 130Galeev, R ........................................................... 124Gali, A ............................................................... 29Galinski, H .......................................................... 30Gall, K ............................................................. 137Gallagher, A ...................................................... 102Gallagher, M ................................................. 33, 70Gallaway, J ........................................................ 115Gallego, N ........................................................... 62Gan, M ......................................................... 38, 79Ganesan, R .......................................................... 85Ganesan, Y .................................................. 20, 103Ganfeng, T .......................................................... 72Gangopadhyay, A .............................................. 107Ganguli, S ........................................................... 47Gansert, R ........................................................... 76Gao, B ........................................... 10, 43, 55, 126Gao, C ............................................................... 39Gao, F ................................................. 58, 66, 125Gao, L ............................................................. 103Gao, M ................................................. 48, 95, 119Gao, W ............................................................. 100Gao, X ............................................................... 11Gao, Y .......................... 18, 26, 27, 37, 55, 73, 83, ....................... 93, 101, 110, 123, 127, 144Garate, E ........................................................... 111Garay, A ......................................................... 15, 95Garcia, B ........................................................... 133Garcia, E ........................................................... 121Garcia, H ............................................................. 67Garcia-Hinojosa, A .............................................. 11Garcia-Infanta, J .................................................. 89Garcia-Mateo, C .................................................. 18Garcia-Sanchez, E ............................................. 106García H., A ....................................................... 142Gardin, P ............................................................. 24Garg, A ....................................................... 57, 103Garkida, A ................................................... 42, 120Garlea, E ............................................................. 94Garmestani, H ....................................... 13, 78, 105Garrett, W ............................................................ 47Garrido, F .............................................. 11, 71, 129Garside, G ......................................................... 118Garzon, F ........................................................... 117Gates, R ............................................................... 77Gaudet, J ........................................................... 144Gaune-Escard, M ................................................ 63Gaustad, G ......................................................... 104Gauthier, C ........................................................ 129Gautieri, A ........................................................... 93Gavras, A ....................................................... 77, 96Gaytan, S ....................................................... 53, 60Gazawi, A ............................................................ 52Gazder, A ............................................................. 32

153

IndexGeantil, P ..................................................... 27, 101Gebert, A ..................................................... 93, 127Gebhardt, J ........................................................ 116Geddes, B .......................................................... 128Gee, S ............................................................... 65Geier, G ............................................................... 56Geiss, R ............................................................... 40Geltmacher, A ........................................ 69, 88, 124Gemmen, R ....................................................... 100Genau, A .............................................................. 54Gencer, O .......................................................... 140Gendre, M ........................................................... 96Genevois, C ................................................. 48, 107Geng, X ............................................................. 143Gennaro, P ........................................................... 59Gentleman, M ................................................... 109George, E .................................... 26, 29, 40, 45, 87Gerard, B ............................................................. 99Gerberich, W ................................................. 11, 45Gerbeth, G ........................................................... 24Gerczak, T ......................................................... 140Gerdemann, S .............................................. 58, 111Germann, T ................................................... 26, 67Gers, H ............................................................... 17Gershenzon, M .................................................... 36Gerson, A........................................................... 101Gerstmayr, G ....................................................... 61Gervasio, D ....................................................... 117Gesing, A ..................................................... 43, 111Geysen, D .......................................................... 104Ghasemi, H ......................................................... 20Ghasemi-Nanesa, H ............................................ 51Ghazisaeidi, M ............................................ 67, 117Gheno, T .............................................................. 44Gholinia, A ........................................................ 127Ghoniem, N ....................................................... 122Ghosh, A .......................................... 15, 51, 78, 132Ghosh, G ....................................................... 65, 66Ghosh, S .......................................... 38, 87, 97, 140Ghosn, L ............................................................ 114Gianola, D ........................................................... 20Gibala, R ............................................................. 19Gibson, J ............................................................. 13Gibson, L ....................................................... 16, 34Gibson, M ................................................... 62, 134Gierlotka, W ................................ 28, 47, 65, 84, 85Gigineishvili, A ................................................. 125Gilbert, E ............................................................. 90Gilles, R ...................................................... 27, 134Gitanjaly G, G ..................................................... 75Gittard, S ............................................................. 49Glaeser, A ............................................................ 48Glavicic, M ......................................................... 78Gleiter, H ............................................................. 56Glicksman, M .............................. 22, 41, 60, 74, 78Gludovatz, B ....................................................... 29Glynn, M ............................................................. 59Gnaeupel-Herold, T .......................................... 134Gnäupel-Herold, T .............................................. 30Goeken, M ........................................ 15, 32, 33, 51, ............................. 69, 70, 88, 89, 106, 124Goel, M ............................................................. 111Göken, M ................................................ 52, 93, 97Gokhale, A ......................... 57, 81, 88, 99, 108, 121Goksu, O ............................................................. 40Golding, N........................................................... 87Goldman, N ....................................................... 115Gollapudi, S ........................................................ 85Goller, G ............................................................ 142Golubic, T ........................................................... 76Golumbfskie, W .................................................. 72Gomes, J ...................................... 82, 103, 136, 137

Gong, J ............................................................... 78Gong, X ............................................................... 77Gonzalez, J ........................................................ 109Gonzalez-Velazquez, J ...................................... 143Goo, B ............................................................. 143Gooch, J .............................................................. 25Good, B ......................................................... 87, 95Goodarzi, M ...................................................... 115Goodman, L ...................................................... 131Goodwin, W ........................................................ 57Goosens, D ........................................................ 117Goossens, D ...................................................... 117Gopal, P ............................................................... 95Gopalakrishnan, C ............................................... 92Gopalan, V .......................................................... 95Gordon, A .................................................... 97, 109Gordon, P .............................................. 15, 85, 123Gornostyrev, Y .............................. 14, 87, 122, 123Gosslar, D ............................................................ 78Goswami, R................................................... 72, 91Goto, S ............................................................... 51Goto, T ............................................................. 117Gottstein, G ........................................... 70, 90, 126Goutiere, V .......................................................... 74Goyel, S......................................................... 13, 40Grabowski, B .............................................. 79, 122Graetz, J ............................................................ 141Graf, M ............................................................... 66Graff, G ....................................................... 91, 133Gramegna, N ..................................................... 114Gramlich, M ........................................................ 46Gran, H ............................................................... 39Granasy, L ........................................................... 41Grande, T ...................................................... 39, 59Grandfield, J ................ 56, 61, 74, 81, 94, 111, 127Grant, D ............................................................... 76Grant, G ....................................................... 44, 132Grantham, J ......................................................... 80Graves, R ....................................................... 93, 94Gravouil, A .......................................................... 69Gray, A ............................................................... 46Gray, G ............................. 21, 48, 87, 97, 131, 140Greaney, P ................................................... 83, 117Green, N ........................................................ 61, 96Greenberg, B ..................................................... 122Greenfield, S ..................................................... 142Greenstein, K .................................................... 140Greenwood, M .................................................... 38Greer, A ................................. 28, 37, 41, 47, 65, 84Greer, J ............................................................... 40Gregory, J ............................................................ 87Grelier, A ............................................................. 11Grest, G ............................................................... 83Gripenberg, H...................................................... 74Gröbner, J ...................................................... 62, 80Groeber, M ...................................... 50, 86, 88, 106Groebner, J .......................................................... 24Groger, R ....................................................... 31, 68Gromov, V ......................................................... 109Gronostajski, Z .................................................... 99Gronsky, R .......................................................... 48Gross, M .............................................................. 22Grosse, A ............................................................. 31Grosselle, F ....................................................... 114Grossman, J ................................................. 83, 117Groza, J ............................................. 36, 71, 75, 97Gruber, D ............................................................ 46Grün, G ............................................................... 94Gu, C ............................................................... 32Gu, S ............................................................... 72Gu, Y ..................................................... 107, 140Guan, P ............................................................... 18

Guang-qiang, L ................................................... 66Guangchun, Y.................... 68, 76, 86, 96, 108, 113Guangping, Z ...................................................... 55Guangrong, D .................................................... 141Guay, D ....................................................... 76, 144Guda Vishnu, K ................................................. 117Gudbrandsen, H .................................................. 30Guebels, C ........................................................... 75Gueijman, S ......................................................... 25Guenther, R ......................................................... 78Guerrero-Mata, M ............................................. 106Guilian, R ............................................................ 48Guillen-Bonilla, H ............................................... 34Guillot, M .................................................... 21, 130Gullett, P ................................................... 140, 142Gulsoy, B ....................................................... 11, 50Gulsoy, G ............................................................ 85Gumbsch, P ........................................... 14, 50, 140Gunderov, D ........................................................ 32Gunesoglu, C..................................................... 119Gunesoglu, S ..................................................... 119Gungormus, M ...................................... 17, 73, 110Gunnewiek, L .................................................... 111Günyüz, M .......................................................... 49Guo, F ...................................... 14, 27, 28, 46, 65, ............................... 84, 102, 103, 118, 135Guo, H ......................................................... 56, 81Guo, J ....................... 35, 103, 119, 136, 141, 144Guo, L ............................................................... 65Guo, M ............................................................... 25Guo, W ............................................................... 95Guo, X ....................................................... 53, 113Guo, Y ......................... 11, 15, 23, 79, 88, 91, 144Guo, Z ..................................................... 119, 136Guo Liang, L ..................................................... 120Gupta, C .............................................................. 33Gupta, M ........................................................... 103Gupta, N ............................................................ 130Gupta, R .......................................... 62, 66, 70, 103Gupta, V ............................................................ 118Gurao, N ............................................................ 138Gurevich, S ......................................................... 72Gurmen, S ......................................... 140, 143, 144Gürmen, S ......................................................... 141Gurses, E ........................................................... 123Guruprasad, P ................................................ 64, 87Gururajan, M ....................................................... 69Guruswamy, S ................................................... 118Gusberti, V ........................................................ 112Gusev, A ............................................................ 126Guzman, D ........................................................ 123Guzonas, D .......................................................... 37Gwaze, M ............................................................ 31Gwynne, B .......................................................... 24

H

Ha, C ............................................................. 141Ha, H ............................................................... 21Ha, S ............................................................... 28Haarberg, G ..................................... 20, 30, 39, 104Haataja, M ....................................... 19, 31, 38, 110Habraken, A ......................................................... 88Hackenberg, R ................................................... 114Hackett, M ........................................................... 45Hackney, S .......................................................... 63Hadaway, J .......................................................... 71Haddadi, F ........................................................... 21Haeffner, D .................................................. 71, 101Hagelüken, C ....................................................... 87Hagni, A .......... 11, 18, 37, 57, 74, 91, 94, 111, 128Hahn, H ....................................................... 71, 114


154

IndexHaimanot, M ..................................................... 110Haines, C ............................................................. 53Haixin, Z ............................................................. 10Haiyan, Y .......................................................... 126Hajiakbari, F ....................................................... 88Håkonsen, A ...................................................... 128Hald, J ............................................................. 102Hale, L ............................................................... 45Halevy, I .............................................................. 95Halil, G ............................................................. 108Hall, D ............................................................. 113Hall, G ............................................................... 40Hall, J ............................................................... 96Halle, T ............................................................. 106Hallen-Lopez, M ............................................... 104Halloran, J ........................................................... 40Ham, Y ............................................................. 143Hamaguchi, M ..................................................... 76Hamdy, A ........................................................... 125Hamedi, Y ................................................... 38, 144Hamel, S .............................................................. 12Hamer, S .............................................................. 94Hammad, M ...................................................... 111Hammerschmidt, T .............................................. 31Han, B ................................................. 17, 90, 144Han, C ............................................................... 40Han, G ............................................................... 23Han, J ............................................................... 28Han, K ............................................................... 85Han, L ............................................................... 99Han, M ............................................................... 28Han, S ....................................................... 83, 120Han, Y ............................................................. 124Han, Z ............................................................. 132Handwerker, C ...................................... 14, 65, 135Haney, E ............................................................ 118Hanks, D ........................................................... 125Hanlumyuang, Y ................................................. 45Hanna, M ............................................................. 18Hanrahan, R .................................... 21, 77, 97, 131Hansen, G .............................................. 83, 90, 119Hansen, J ............................................................. 83Hansen, N .................................................... 33, 119Hanson, E .......................................................... 134Hao, H ............................................................... 14Hao, X ............................................................... 59Hao, Y ............................................................... 10Haouaoui, M ............................................... 89, 124Haq, S ............................................................... 54Harada, Y .......................................................... 124Harbola, M ........................................................ 132Harcuba, P ......................................................... 136Harder, B ............................................................. 46Harder, R ........................................................... 117Harding, T ......................................................... 121Hardy, M ............................................................. 98Hariharan, R ........................................................ 92Hariharaputran, R .......................................... 22, 95Harimkar, S ................................. 14, 30, 49, 67, 86Harlow, D ............................................................ 93Harringa, J ......................................................... 102Harris, R ........................................................ 48, 89Hart, G ......................................................... 23, 79Hartig, C ...................................................... 78, 100Hartvigsen, J ....................................................... 56Hartwig, K ............................... 32, 33, 99, 107, 124Hartwig, T ........................................................... 99Harvey, W ........................................................... 35Hasan, A ............................................................ 117Hasegawa, T ........................................................ 59Hashemi-Sadraei, L ........................................... 106Hashemian, S .................................................... 142

Hasheminiasari, M .............................................. 38Hashida, T ......................................................... 144Hassan, H .......................................................... 141Haswell, R ......................................................... 106Hatada, N ............................................................ 12Hatcher, N ........................................................... 41Hatkevich, S ...................................................... 131Hattar, K .............................................................. 25Hattel, J ............................................................. 102Haugen, T .......................................................... 128Haugland, E ....................................................... 129Haupt, T .............................................................. 43Hausöl, T ............................................................. 52Havens, A .......................................................... 121Hawk, J ....................................................... 25, 133Hawkes, G ........................................................... 56Haxhiaj, A ............................................. 79, 99, 111Haxhiaj, E ............................................. 79, 99, 111Hay, R ............................................................... 90Hayamizu, Y........................................................ 17Hayden, S ............................................................ 46Hayes, P ........................................................ 61, 99Haynes, P .......................................................... 105Hayward, E ....................................................... 122He, A ............................................................... 14He, B ............................................................... 46He, H ............................................................... 39He, J ....................................................... 78, 141He, L ............................................................... 15He, Q ............................................................... 80He, W ................................................. 49, 94, 127He, X ............................................... 12, 125, 143He, Y ............................................................... 63Hebert, R ....................................................... 18, 69Hecht, U ........................................................ 41, 78Heck, K ............................................................. 140Hector, L.......................... 13, 43, 68, 114, 122, 137Hector Jr, L .................................... 43, 99, 123, 132Heenan, R .......................................................... 135Heerdegen, A ..................................................... 117Hefferan, C ........................................................ 101Hefti, L ............................................................... 78Hegazy, A ............................................................ 66Hehui, Z .............................................................. 92Heidloff, A ........................................................... 59Heilig, M ................................................. 62, 66, 80Heilmaier, M ....................................................... 70Hein, A ......................................................... 42, 92Heinl, P ............................................................... 11Heinrich, H ........................................................ 128Heinz, W ............................................................. 59Heldt, L ............................................................... 18Helle, S ....................................................... 76, 144Helmink, R .......................................................... 98Hemker, K ................................................... 40, 138Henager, C .......................................................... 58Henao, H ............................................................. 61Henein, H ........................................ 42, 50, 71, 120Henke, S .............................................................. 86Henke, T ............................................................ 126Hennies, W .......................................................... 10Hennig, R .................................. 117, 121, 122, 137Henrickson, L .................................................... 109Henry, J ............................................................... 45Henshall, G ....................................................... 136Henson, M ......................................................... 128Hepburn, D ........................................................ 125Herlach, D ............................................... 22, 41, 60Herling, D ......................................................... 132Hernandez, A ..................................................... 116Hernandez-Garcia, A ........................................... 11Hernandez-Garcia, S ........................................... 24

Hernquist, M ....................................................... 12Herrera, D ......................................................... 123Herring, J ............................................................. 56Heske, C ............................................................ 125Heulens, J ............................................................ 98Hewertson, R ....................................................... 77Hibbard, G ......................................................... 108Hickel, T ................................................ 15, 79, 122Hiel, C ............................................................. 114Higashida, K ....................................................... 33Highland, M ........................................................ 46Hild, F ............................................................... 69Hild, S ............................................................... 55Hildeman, G .................................................. 29, 30Hilgraf, P ............................................................. 54Hillebrand, S ..................................................... 126Hills, M ............................................................. 128Hinderliter, B .................................................... 121Hiraga, K ............................................................. 13Hirakawa, T ......................................................... 71Hirano, T ............................................................. 63Hirashima, R ..................................................... 108Hirata, G ........................................................ 36, 55Hirt, G ..................................................... 126, 131Hirth, J ........................................... 26, 38, 70, 105Hirvela, J ............................................................. 35Hjortstam, O ........................................................ 74Hnilova, M .......................................................... 17Ho, C ............................................... 47, 115, 119Ho, T ............................................................. 144Hoagland, R ................ 26, 67, 70, 85, 86, 105, 139Hoc, T ............................................................. 102Hockauf, K ........................................................ 106Hockauf, M ................................................. 69, 106Hodge, A ....................... 12, 33, 34, 51, 57, 93, 104Hoelzer, D ................................. 102, 107, 118, 135Hoffelner, W ...................................... 25, 45, 63, 82Hoffmann, A ........................................................ 29Hoffmann, T ........................................................ 38Hofmann, D ............................................. 55, 71, 93Hofmann, M ........................................................ 27Hofmann, T ....................................................... 125Hofmeister, C ...................................................... 33Hofmeister, W ............................................. 25, 120Hogan, P ............................................................ 143Hogan, R ............................................................. 56Hohenwarter, A ............................................. 15, 89Hohl, B ............................................................... 96Hohmann, A ........................................................ 93Holcomb, G ............................................... 100, 145Holder, H ............................................................. 49Holland-Moritz, D ......................................... 22, 60Holm, E ............................. 12, 32, 33, 38, 105, 138Holt, R ............................................................. 135Holtz, R ......................................................... 72, 91Holy, V ............................................................... 64Holzer, I .............................................................. 12Hombergsmeier, E ............................................... 24Homer, E ........................................................... 110Hong, C ............................................................. 140Hong, E ............................................................. 103Hong, H ......................................................... 46, 64Hong, S ............................... 22, 113, 117, 141, 143Hong, W ...................................................... 84, 140Hong, Z ............................................................. 108Hong-liang, Z ...................................................... 72Hong-Xu, C ......................................................... 82Hongbin, L ........................................................ 119Hongbo, Z ......................................................... 141Hongliang, Z ................................................. 72, 92Hongqiang, R .............................................. 19, 142Hono, K ............................................................. 116

155

IndexHooks, D ............................................. 83, 123, 139Hop, J ............................................................. 129Höppel, H ............................................................ 52Horbach, J ........................................................... 22Horita, T ...................................................... 81, 100Horita, Z ................................................ 32, 33, 107Horky, J ............................................................... 33Hornbuckle, B ................................................... 107Horstemeyer, M .................................... 13, 80, 141Horstemeyer, S .................................................... 43Hort, N ....................................... 43, 62, 80, 81, 99Horton, J .............................................................. 83Hosemann, P ....................................... 25, 102, 118Hosford, W .................................................... 48, 89Hosokawa, A ....................................................... 11Hossain, K ......................................................... 137Hou, T ............................................................... 11Hou, X ............................................................... 39Houbaert, Y ......................................................... 11House, J ................................................... 48, 89, 97Hovanski, Y ................................................. 44, 132Howe, J ....................................................... 96, 106Howell, R ............................................................ 44Hoyt, J ..................... 12, 19, 22, 38, 58, 75, 95, 98Hrabe, N ................................................ 11, 53, 127Hsia, K ....................................................... 53, 113Hsia, Y ......................................................... 66, 74Hsiao, V .............................................................. 40Hsiao, Y ....................................................... 47, 136Hsiao, Z ....................................................... 56, 103Hsieh, G ............................................................ 144Hsieh, Y ............................................................. 142Hsiung, L ..................................................... 87, 107Hsu, Y ............................................................... 11Hu, B ....................................................... 80, 100Hu, H ............................................................... 99Hu, J ................................................. 91, 95, 145Hu, L ......................................................... 35, 42Hu, M ............................................................... 90Hu, W ............................................................... 90Hu, X ............................................. 16, 35, 43, 55Hu, Y ......................................................... 23, 37Hu, Z ......................................................... 70, 75Hua, H ............................................................... 82Hua, J ............................................................... 82Hua, Q ............................................................... 11Hua, S ............................................................... 40Hua, Z ................................................... 10, 53, 76Huabing, L .......................................................... 21Huang, A ........................................................... 102Huang, D ................................................. 12, 23, 79Huang, E ........................................................... 134Huang, J ............................ 16, 20, 37, 70, 116, 122Huang, L .......................................... 18, 85, 94, 127Huang, M ............................................................ 13Huang, Q ............................................................. 61Huang, S ....................................................... 65,104Huang, T ............................................................ 136Huang, W ...................................................... 54, 94Huang, X ......................................... 33, 42, 61, 120Huang, Y ............... 23, 55, 62, 70, 81, 99, 102, 132Huang, Z ............................. 23, 36, 59, 64, 80, 118Hubbard, C .......................................................... 27Hubbard, J ......................................................... 137Huber, D .............................................. 11, 124, 143Huber, N ............................................................ 132Hubert, J ........................................................ 41, 48Hudspeth, M ........................................ 15, 107, 140Huey, H ............................................................... 76Huez, J ............................................................. 142Hug, E ............................................................... 88Hugenschmidt, C ................................................. 27

Hughes, D ......................................................... 135Huh, H ............................................................. 144Huilan, S ................................................. 35, 91, 96Huizenga, G ...................................................... 130Hull, A ............................................................... 45Humadi, H ........................................................... 12Humphrey, E ....................................................... 74Humphreys, N ..................................................... 61Hunang, J ............................................................ 34Hünert, D ............................................................. 24Hung, C ............................................................... 91Hunter, L ........................................................... 123Huo, L ............................................................. 132Huo, Y ............................................................. 116Hurley, M .......................................... 131, 144, 145Huskins, E ................................................... 51, 106Hussain, S ......................................................... 110Husseini, N ................................................ 123, 134Hutchinson, N ..................................................... 18Huth, C ............................................................. 103Hwang, I ...................................................... 61, 144Hwang, J .............................. 11, 18, 23, 30, 37, 42, .......................... 56, 57, 60, 61, 63, 74, 79, ....................... 94, 110, 111, 120, 128, 141Hwang, W ........................................................... 66Hyatt, T ............................................................... 90Hyun, C ............................................................. 142Hyun, S ............................................................... 28

I

Iadicola, M .......................................................... 35Ibragimov, S ...................................................... 130Ice, G ........................... 26, 46, 87, 101, 102, 134Idris, M ............................................................... 72Ihlefeld, J ............................................................. 95Iida, O ............................................................... 29Ikhmayies, S ................................................ 74, 128Ila, D ................................................. 26, 82, 127Ilavsky, J ....................................................... 64, 65Ilbagi, A ............................................................... 50Im, J ............................................................... 32Imai, H ......................................................... 61, 71Imai, Y ............................................................. 117Imam, M .............................. 20, 39, 58, 76, 95, 112Imani, Y ............................................................. 142Imayev, R .......................................................... 124Imery, J ....................................................... 36, 109Imhoff, S ............................................................. 73Imrie, W .............................................................. 72Inácio, W ............................................................. 94Inal, K ............................................................... 80Indacochea, J ....................................................... 82Inel, C ............................................................. 111Inman, D ....................................................... 20, 39Inostroza, C ......................................................... 31Inoue, A ......... 37, 55, 56, 73, 74, 94, 110, 127, 142Inoue, J ............................................................... 78Inui, H ............................................................. 122Ipser, H ......................................................... 84, 85Iqbal, G ............................................................... 81Irie, K ............................................................... 89Irissou, E ............................................... 29, 59, 114Irwin, G ....................................................... 82, 136Irzhak, A .............................................................. 10Isheim, D ..................................................... 66, 144Ishida, T .............................................................. 29Ishikawa, T ........................................................ 102Islam, M ............................................................ 103Islam, Z ............................................................... 64Isler, D ............................................................... 57Ismer, L ............................................................. 122

Isvilanonda, V ................................................... 141Ivan’ko, V ......................................................... 124Ivanisenko, Y ................................................ 51, 69Ivanov, M .......................................................... 122Ivanov, Y ........................................................... 109Ivasishin, O ................................................... 32, 58Ivey, D ......................................................... 14, 65Iwata, N ............................................................. 135Izvekov, S .......................................................... 139

J

Jaansalu, K .......................................................... 85Jablonski, P ................................... 44, 58, 100, 145Jackson, B ..................................................... 20, 39Jackson, J ............................................................ 29Jackson, M .................................................... 39, 50Jacobs, P .............................................................. 30Jacobsen, K ....................................................... 121Jacobson, A ......................................................... 64Jadhav, N ..................................................... 46, 136Jafaar, E ............................................................. 123Jaffe, J ............................................................... 58Jagannathan, R .......................................... 104, 126Jahed, H ............................................................... 80Jahja, A ............................................................... 19Jain, P ............................................................... 48Jak, E ............................................................... 61Jalil, J ............................................................... 21James, P ............................................................. 126Jamseh, M ........................................................... 49Janda, M .............................................................. 56Janecek, M ...................................... 15, 88, 95, 136Janelidze, I ........................................................ 142Jang, C ............................................................... 82Jang, D ........................................... 18, 40, 43, 143Jang, E ............................................................... 28Jang, H ............................................................. 116Jang, J ......................................................... 37, 63Janissek, P ........................................................... 68Janssens, K .......................................................... 63Jao, C ............................................................. 142Japaridze, L ....................................................... 141Jaquerod, C ......................................................... 42Jaques, B ........................................... 125, 143, 144Jaramillo, D ......................................................... 94Jaramillo, E ....................................................... 105Jaramillo, L ....................................................... 137Jarry, P ............................................................. 111Jasthi, B ............................................................. 102Javaid, A ............................................................ 116Jawahir, I ........................................................... 133Jawali, V ............................................................ 120Je, J ............................................................... 13Jeanclaude, V ...................................................... 29Jekl, J ............................................................... 99Jen, A ............................................................... 17Jendrzejczyk-Handzlik, D ................................... 85Jennerjohn, S ..................................................... 134Jensen, D ............................................................. 69Jensen-Holm, C ................................................... 35Jensrud, O ........................................................... 76Jeon, H ............................................................. 128Jeon, S ............................................................. 140Jeong, H ............................................................ 113Jeong, I ............................................................. 144Jeong, J ......................................................... 13, 23Jeong, M ................................................ 28, 85, 118Jeong, Y ......................................................... 70, 91Jepson, P .................................................. 29, 48, 66Jha, M ............................................................... 56Jha, S ................................................. 44, 77, 137


156

IndexJi, C ............................................................... 99Ji, H ............................................................... 62Ji, K ....................................................... 10, 130Jia, Q ......................................................... 34, 67Jia, R ......................................................... 40, 59Jia, W ............................................................. 120Jia ming, Z .......................................................... 54Jian, L ............................................................. 129Jian, P ............................................................... 23Jianchao, S .................................................. 96, 113Jiang, F ............................................................... 18Jiang, G ....................................................... 82, 104Jiang, H ......................................................... 47, 55Jiang, J ......................................................... 18, 37Jiang, L ....................................... 81, 103, 119, 123Jiang, T ........... 11, 23, 37, 42, 60, 61, 79, 108, 144Jiang, W ............................................................ 125Jiang, Y ................................................... 10, 61, 77Jiang, Z ......................... 37, 78, 131, 140, 142, 143Jianguang, Y ................................................ 12, 141Jianping, P ............................................. 72, 92, 129Jianquan, L ........................................................ 142Jiao, S ....................................................... 39, 115Jie, L ............................................. 39, 59, 72, 92Jie, Z ............................................................. 140Jieng, Y ............................................................... 85Jilai, X ............................................................. 104Jin, C ............................................................. 140Jin, H ................................................. 35, 40, 140Jin, L ......................................................... 80, 81Jin, S ............................................................... 78Jin, X ......................................................... 72, 93Jing, H ....................................................... 12, 141Jing, P ..................................................... 143, 144Jing, T ............................................................... 69Jingbiao, F ......................................................... 104Jingyang, L .......................................................... 19Jin Long, Z ........................................................ 120Jiricny, V ............................................................. 80Jo, M ............................................................. 101Jo, T ............................................................... 82Jodoin, B ........................................................... 114Johansen, J .......................................................... 39Johanson, S ......................................................... 65Johansson, J......................................................... 50Johnson, A ........................................................... 16Johnson, F ........................................................... 27Johnson, H......................................................... 117Johnson, J .......................................................... 104Johnson, K........................................................... 96Johnson, N......................................................... 121Johnson, O..................................................... 83, 90Johnson, W ................................ 28, 55, 71, 93, 112Jolly, M ......................................................... 77, 96Jonas, J ............................................................... 81Jones, A ............................................................. 131Jones, D ............................................................... 13Jones, I ......................................................... 21, 78Jones, J ............................................. 116, 132, 134Jones, Jr, W ....................................................... 116Jones, P ............................................................. 104Jones, R ............................................................. 120Jonnalagadda, K .................................................. 40Joo, S ............................................................... 15Joo, Y ............................................................. 118Jordan, J .............................................................. 16Jordon, B ........................................................... 141Jordon, J ........................................................ 13, 80José, D ............................................................... 56Joshi, S ............................................................. 108Joshi, V ............................................................. 116Joung, S ............................................................... 15

Ju, J ............................................................... 18Juarez-Islas, J .................................................... 143Judson, J .............................................................. 36Jue, J ....................................................... 26, 118Jun, J ............................................................. 140Jun, X ............................................................... 57June, R ............................................................... 93Jun Fei, M ..................................................... 76, 86Jung, C ............................................................... 17Jung, H ................................................. 13, 63, 141Jung, I ................................................. 73, 81, 116Jung, S ......................................................... 14, 28Junkaew, A .......................................................... 95Juya, Z ............................................................... 87

K

Kabir, M .............................................................. 68Kabra, S ............................................................. 134Kacar, T ............................................................... 17Kad, B ............................................................... 89Kadhim, M ........................................................ 143Kadjo, J ............................................................... 29Kaftelen, H .......................................................... 71Kahvecioglu, O ................................................. 141Kai, J ............................................................. 134Kai, L ......................................................... 68, 72Kai, W ............................................................... 56Kain, V ............................................................. 140Kainer, K ........................................... 15, 62, 81, 99Kaini-Rashid, A ........................................... 29, 107Kakegawa, K ..................................................... 124Kakeshita, T ........................................................ 65Kakiuchi, H ....................................................... 142Kalashnikov, V .................................................... 10Kalay, E ....................................................... 60, 127Kalay, I ............................................................. 127Kalidindi, S ................................................... 69, 88Kalkundri, K ..................................................... 130Kalpoe, J ............................................................. 96Kalyanaraman, R ................................... 67, 93, 107Kalyanasundaram, N ......................................... 117Kamantsev, A .................................................... 130Kamikawa, N ...................................................... 33Kamimura, Y ............................................... 14, 122Kamineni, P ......................................................... 62Kamkar Zahmatkesh, N .................. 10, 38, 54, 109Kammerhofer, C .................................................. 15Kampe, S ..................................................... 42, 133Kamto Tegueu, A ................................................. 84Kanbayashi, D ................................................... 140Kandil, A ........................................................... 129Kang, B ................................................... 38, 57, 81Kang, D ......... 73, 87, 100, 116, 117, 132, 141, 142Kang, J ............................................... 63, 138, 140Kang, K ......................... 34, 53, 101, 110, 139, 140Kang, M ............................................................ 143Kang, N ............................................................. 142Kang, S .................. 14, 16, 27, 28, 46, 65, 84, 102, ............. 113, 118, 129, 132, 135, 140, 141Kang, U ....................................................... 15, 141Kang, Y ......................................................... 63, 81Kang, Z ............................................................. 119Kangjian, S .................................................... 54, 55Kano, K ............................................................... 76Kantzos , P ........................................................ 114Kao, C ................................... 14, 28, 65, 103, 118Kao, P ............................................................... 56Kao, T ............................................................... 66Kapelle, B ........................................................... 20Kaplan, W ..................................................... 30, 48Kapoor, D ...................................................... 53, 90

Kapoor, M ........................................................... 66Kapoor, R ............................................................ 33Kar, M ............................................................. 104Kar, S ......................................................... 86, 98Karaduman, B ................................................... 143Karakaya, I .......................................................... 40Karaman, I ............. 32, 33, 51, 54, 70, 99, 107, 124Karan, N ............................................................ 133Karcher, C ........................................................... 63Karhausen, K ..................................................... 126Karjalainen, P .............................................. 51, 110Karkin, I .............................................................. 14Karkina, L ........................................................... 14Karl, J ............................................................... 11Karma, A ..................................................... 58, 139Karppinen, M .................................................... 115Karthik, S ............................................................ 15Kaschner, G ............................................. 83, 90, 97Kashani Bozorg, S............................................... 90Kashiwagi, Y ..................................................... 142Kashyap, B .......................................................... 92Kashyap, S .......................................................... 36Kaski, K ............................................................ 105Kasprzak, W ........................................................ 72Kassegne, S ........................................... 25, 52, 137Kassner, M ............................................ 27, 33, 101Kastner, O ........................................................... 87Katgerman, L ...................................................... 56Katiyar, R .......................................................... 133Kato, H ......................................................... 37, 74Kato, T ............................................................... 61Katoh, Y .............................................................. 25Katragadda, S ...................................................... 77Katsman, A .......................................................... 99Kaufman, M ........................................................ 57Kaushal, G ......................................................... 114Kawakami, M ...................................................... 39Kawakami, T ..................................................... 140Kawalla, R ........................................................... 66Kawamura, Y .............................................. 81, 116Kawasaki, M ......................................... 29, 33, 106Kaya, A ............................................................. 116Kayali, E ....................................... 49, 86, 142, 143Kayali, S ............................................................ 144Kayihan, A ........................................................... 75Kazimirov, A ....................................................... 84Ke, J ............................................................... 28Kearns, V ............................................................ 34Kecskes, L ................... 32, 33, 51, 70, 99, 107, 144Keer, L ............................................................... 93Keiser, D ....................................... 25, 26, 118, 135Keist, J ............................................................. 115Keller, C .............................................................. 88Keller, F ............................................................ 112Keller, R .............................................................. 40Keller, S ............................................................ 109Kellogg, G ........................................................... 56Kelly, A ....................................................... 21, 114Kelly, M .............................................................. 70Kempf, B ............................................................. 44Kennedy, F .......................................................... 31Kennedy, J ........................................................... 68Kennedy, M ....................................... 20, 40, 59, 77Keralavarma, S .................................................... 20Kerber, M ............................................................ 83Kerr, J ............................................................... 53Kerr, M ................................................. 27, 45, 135Kerscher, T .......................................................... 23Keshavarz, Z ....................................................... 13Kesler, M ....................................................... 13, 40Kestens, L ............................................................ 95Keul, C ............................................................. 131

157

IndexKhajeh, E ............................................................. 69Khaji, K ............................................................. 112Khaleel, M ........................................................... 63Khalid, F ........................................................... 104Khalifa, H ............................................................ 55Khan, K ............................................................... 47Khan, M .............................................................. 47Kharicha, A ......................................................... 61Khasyap, D ........................................................ 104Khatayevich, D ................................................... 17Khater, H ............................................................. 87Khatibi, G ............................................................ 33Kheirandish, S ................................................... 115Khiev, S ............................................................... 50Khisamov, R ........................................................ 16Khovailo, V ....................................................... 130Kiani-Rashid, A ................... 18, 19, 38, 44, 74, 144Kido, K ............................................................. 138Kiggans, J ............................................................ 58Kildea, J .............................................................. 91Kim, B ................................... 10, 13, 93, 118, 142Kim, C ................... 19, 38, 46, 57, 65, 75, 84, 142Kim, D .............................. 13, 15, 56, 73, 82, 109, ..................... 129, 130, 132, 140, 141, 144Kim, E ................................................. 46, 84, 115Kim, G ....................................... 71, 132, 140, 143Kim, H .......................... 12, 13, 15, 62, 85, 88, 91, ............. 101, 116, 122, 129, 134, 140, 143Kim, I ............................................................. 143Kim, J .. 10, 14, 16, 28, 34, 40, 46, 53, 65, 70, 81,

.... 84, 85, 90, 94, 107, 116, 118, 125, 129, ..... 130, 131, 133, 140, 142, 143, 144, 145Kim, K ...................................... 13, 14, 22, 28, 70, ............................. 116, 124, 130, 132, 144Kim, M ............. 16, 34, 65, 82, 115, 128, 140, 144Kim, N ..................... 10, 13, 15, 22, 132, 142, 143Kim, S .............. 12, 13, 21, 24, 28, 43, 61, 78, 80, ........ 82, 91, 100, 116, 117, 119, 120, 128, ..... 129, 131, 132, 138, 140, 141, 142, 143Kim, T ............................................... 88, 138, 141Kim, W ........... 13, 56, 73, 140, 141, 142, 143, 144Kim, Y .......... 13, 27, 37, 57, 82, 84, 95, 108, 109, ..... 119, 129, 131, 135, 138, 140, 143, 144Kimmer, C ......................................................... 120Kimpton, J ......................................................... 134Kimura, A .......................................................... 107Kimura, Y .......................................................... 137King, A ............................................................. 138King, P ............................................................... 48Kingsbury, D ....................................................... 47Kinney, C ............................................................ 65Kinsella, M .......................................................... 22Kioussis, N ........................................................ 122Kipouros, G ................................................... 43, 62Kirchain, R ................ 49, 68, 86, 87, 104, 121, 137Kirchheim, R ................................................. 48, 51Kirk, M ............................................................. 108Kirka, M .............................................................. 40Kiselkov, D ......................................................... 53Kishida, K ......................................................... 122Kishimoto, H ..................................................... 100Kitchin, J ....................................................... 25, 97Kiyotani, K .......................................................... 29Kizilaslan, E ...................................................... 141Kjar, A ............................................................. 109Kjos, O ......................................................... 20, 39Klag, O ............................................................. 132Klassen, I ....................................................... 22, 60Klassen, R ........................................................... 40Klaus, G ........................................................ 62, 80Klement, U ........................................................ 108Klemf, J ............................................................... 99

Klett, C ............................................................... 35Klier, E ............................................................... 70Klingelhöffer, H .................................................. 24Klotz, B ....................................................... 70, 144Knaack, J ............................................................. 74Knaak, U ........................................................... 126Knipling, K ................................... 21, 74, 106, 129Knori, K ............................................................ 144Knutson, J ........................................................... 98Ko, C ............................................................. 103Ko, I ............................................... 10, 142, 143Ko, Y ............................................. 15, 32, 46, 51Kobas, M ............................................................. 64Kobayashi, K ..................................................... 131Kobayashi, T ....................................................... 46Kobeisy, A ........................................................... 91Koch, C ................................................... 51, 66, 70Koch, D ............................................................... 38Koch, H ............................................................... 17Koch, T ............................................................. 119Kockar, B .......................................................... 124Kockegey-Lorenz, R ........................................... 77Kodentsov, A ......................................... 65, 84, 103Koduri, S ....................................... 39, 50, 124, 137Koehler, M .......................................................... 79Koehler, T............................................................ 17Koerner, C .......................................................... 11Koh, S ................. 10, 16, 34, 53, 70, 90, 107, 125Kohaupt, U ........................................................ 126Kohkonen, K ....................................................... 21Köhler, M ............................................................ 54Kohli, S ............................................................... 13Koide, J ............................................................... 76Koike, J ......................................................... 57, 62Koizumi, Y .......................................................... 85Kokenyesi, S ....................................................... 67Kolahdouz, S ..................................................... 114Kolas, S ............................................................. 109Koledov, V .................................................. 10, 130Kolesnikov, Y ...................................................... 63Koleva, E ........................................................... 143Koley, G .............................................................. 16Kolitsch, A......................................................... 113Kolluri, K ................................................ 45, 67, 85Kolmogorov, A .................................................... 31Komatsu, N ......................................................... 76Komazaki, S ...................................................... 144Komiyama, S ....................................................... 57Kondoh, K ............................................... 61, 71, 90Koneva, N ......................................................... 107Kong, C ............................................................. 121Kong, F ............................................................. 144Kong, J ............................................................. 141Kongoli, F ................................................... 66, 103Kongstein, O ....................................................... 30Konno, T ............................................... 13, 95, 113Konovalov, S ..................................................... 109Kontsevoi, O ....................................... 41, 122, 138Koo, M ............................................................... 83Koo, Y ......................................... 15, 97, 101, 131Kopp, J ............................................................... 91Korfmacher, H .................................................... 68Körmann, F ......................................................... 79Korzekwa, D ..................................................... 134Korzhenevskii, A ................................................. 64Koseki, T ............................................................. 78Koshi, M ........................................................... 136Koslowski, M ............................................ 105, 123Kostelak, S .......................................................... 91Koster, M ............................................................ 37Kostorz, G ........................................................... 64Kotula, P ........................................................ 33, 50

Kou, H ............................................................. 124Kountouriotis, Z .................................................. 24Kovacevic, R ......................................... 14, 42, 140Kovarik, L ................................. 11, 57, 68, 78, 139Kozachakov, H .................................................... 55Kozeschnik, E ..................................................... 12Kozlov, A ............................................................. 24Kozlov, E ........................................................... 107Krabbe, R .......................................................... 128Krajewski, P .............. 13, 31, 43, 62, 100, 114, 133Kral, K ............................................................... 16Kral, M ......................................................... 36, 97Kral, R ............................................................... 95Kramer, M ........................................ 27, 38, 60, 66, ............................. 104, 110, 127, 131, 135Krane, M ........................................................... 121Kranzmann, A ..................................................... 24Kraus, L ............................................................... 51Krause, S ........................................................... 125Kreller, C ............................................................. 81Kripesh, V ........................................................... 14Krishna, B ........................................................... 53Krishna, H ......................................................... 107Krishna Balla, V .................................................. 34Krishnamurthy, R ................................................ 19Krishnaswamy, N ...................................... 104, 126Kritboonyarit, P ................................................... 10Kronenberger, T .................................................. 35Krost, A ............................................................... 46Kroupa, A ............................................................ 85Krug, M ............................................................... 17Krugljak, I ......................................................... 128Kruglov, A ......................................................... 124Kruglyak, I .......................................................... 47Krumdick, G ..................................... 19, 38, 57, 75Kruzic, J ................ 11, 17, 36, 55, 73, 93, 109, 127Kshatriya, N .............................................. 104, 126Kubin, L ...................................................... 68, 122Kucheyev, S ...................................................... 107Kuehn, U ..................................................... 41, 120Kühn, U ............................................................... 48Kuhr, B ....................................................... 27, 116Kukimoto, Y ........................................................ 46Kulakov, M ......................................................... 76Kulkarni, N ....................................................... 116Kulkarni, R .......................................................... 36Kulkarni, S ........................................................ 116Kumar, A ..................................................... 54, 129Kumar, C ........................................................... 121Kumar, D ............................................................. 15Kumar, G ................................................. 18, 55, 56Kumar, K ............................................................. 48Kumar, M .................................................... 23, 115Kumar, N ....................................................... 15, 33Kumar, P.............................................. 28, 102, 118Kumar, R ................................................... 128, 138Kumar, S ............................... 14, 31, 48, 49, 61, 77Kumar, V ............................................... 23, 54, 138Kumar Jha, M .............................................. 23, 138Kuntz, J ............................................................. 107Kunz, M ........................................................ 26, 65Kuo, C ............................................................... 47Kuramoto, S .................................................. 33, 59Kurdian, M ........................................................ 105Kurmanaeva, L ........................................ 40, 51, 69Kurosu, S..................................................... 89, 141Kurtz, R ............................................................... 25Kurumlu, D ......................................................... 71Kurzydlowski, K ..................................... 12, 43, 88Kuz’minova, Z .................................................. 126Kuzel, R ............................................ 15, 27, 75, 88Kuzmitski, A ....................................................... 67


158

IndexKuznetsov, A ....................................................... 87Kvasov, N ............................................................ 67Kvithyld, A .................................................... 29, 74Kwan, Z ............................................................... 84Kwon, E ............................................ 100, 117, 142Kwon, J ............................................................... 78Kwon, N ............................................................ 141Kwon, O .............................................................. 24Kwon, S................. 57, 94, 101, 118, 124, 143, 144Kwon, Y ........................................................ 62, 78Kwong, K .......................................................... 128Kyeong, J ............................................................ 13

L

Labar, J ............................................................. 122Lados, D ........ 21, 49, 68, 77, 86, 96, 104, 121, 137Lahlouh, B ........................................................... 75Lai, Y ......................................................... 28, 65Laine, J ............................................................... 24Laird, B ......................................................... 22, 75Lam, C ............................................................... 87Lamas, D ............................................................. 49Lambert, S ........................................................... 80Lammi, C ...................................................... 21, 77Lan, J ............................................................. 113Lancon, F ............................................................ 67Lang, D ............................................................... 68Langdon, T ................................. 15, 32, 33, 51, 69, ................................... 70, 88, 89, 106, 124Langelier, B ....................................................... 116Lani, G ............................................................. 117Lapovok, R ........................................ 24, 32, 52, 89Laptyeva, G ....................................................... 126Lara, L ............................................................... 11Lara-Curzio, E ........................................... 113, 143Larez, J ............................................................. 109Laribou, H ........................................................... 29Larouche, A ......................................................... 42Larsen, J ........................................ 44, 77, 120, 137Larsen, S ............................................................. 39Larson, B ..................................................... 27, 101Lashmore, D ........................................................ 16Lau, L ............................................................. 102Lau, S ............................................................. 123Lau, T ............................................................... 68Laughlin, D ............................................... 100, 145Laughlin, J ..................................................... 20, 98Launey, M ............................................... 71, 73, 93Lauridsen, E ........................................................ 69Laurinavichute, V .............................................. 126Laux, B ............................................................... 41Lavender, C ..................................... 39, 44, 95, 112Lavernia, E ........................... 15, 19, 51, 56, 69, 72, ................... 73, 88, 89, 106, 107, 120, 125Lavoie, P ............................................................. 39Lavrentiev, M .................................................... 108Law, C ............................................................... 81Lawler, H ............................................................ 62Le, N ............................................................... 63Leake, S ............................................................. 117Leau, W ............................................................... 66LeBeau, S .......................................................... 116Lebeuf, M ............................................................ 39Le Bouar, Y ......................................................... 98Le Breton, J ....................................................... 107Lebreton, J ..................................................... 25, 30Le Brun, P ............................... 56, 74, 94, 111, 127Lebyodkin, M ...................................................... 68Lechner, R ........................................................... 64Lee, A ......... 14, 27, 28, 46, 65, 84, 102, 118, 135Lee, B ..................................... 12, 28, 70, 85, 110

Lee, C ................................ 15, 32, 46, 51, 67, 78, ......................... 91, 93, 112, 140, 141, 142Lee, D ....................................... 46, 131, 143, 144Lee, E ............................................................... 91Lee, G ............................................................... 24Lee, H .......................... 28, 46, 61, 63, 82, 84, 85, ............... 91, 103, 113, 131, 141, 143, 144Lee, I ............................................................... 28Lee, J .......................... 13, 14, 15, 16, 23, 28, 43, ...................... 47, 65, 70, 84, 97, 101, 102, ..................... 113, 115, 131, 138, 141, 143Lee, K ................................ 12, 15, 17, 61, 85, 92, ............................. 109, 118, 128, 143, 144Lee, M ................................................... 16, 26, 34Lee, N ............................................................. 102Lee, P ..................................... 24, 39, 41, 56, 106Lee, R ............................................................... 51Lee, S .......................... 21, 22, 27, 46, 55, 59, 61, ......... 83, 86, 106, 131, 135, 140, 141, 142Lee, T ....................... 14, 21, 47, 65, 84, 119, 136Lee, W ............................................... 69, 109, 122Lee, Y ........... 14, 28, 92, 115, 129, 131, 135, 141Leer, C ............................................................. 103Lefstad, M ........................................................... 76Lega, P ............................................................... 10Legendre, F ........................................... 25, 30, 118Legoux, J ..................................................... 29, 114Legros, M .......................................................... 101Legut, D .............................................................. 50Lei, C ......................................................... 12, 97Lei, L ............................................................. 123Lei, M ............................................................... 49Leisk, G ......................................................... 63, 77Leitner, H .......................................................... 102Lejcek, P ............................................................ 138Lekakh, S ............................................................ 25Lemiale, V ........................................................... 64Lemmon, J ................................................... 91, 133Leng, Z ............................................................. 125Leo, P ............................................................... 17Leonhardt, T ........................................................ 29Lerche, M ............................................................ 95LeSar, R .................................................... 121, 127Lesica, S ............................................ 102, 118, 135Lesuer, D ............................................................. 33Leung, T .............................................................. 84Leuthold, J ........................................................... 69Levchenko, E ................................................ 14, 15Levendis, Y ....................................................... 120Levi, K ......................................................... 40, 59Levine, L ....................................... 27, 45, 101, 134Levy, O ............................................................... 79Lewandoska, M ................................................... 88Lewandowska, M ................................................ 88Lewandowski, J ................................... 37, 110, 141Lewis, A ...................... 32, 50, 69, 87, 88, 106, 123Lewis, D .............................................................. 74Lewis, J ......................................................... 49, 71Lewis, M ............................................................. 97Leyson, G .......................................................... 137Lezama-Alvarez, S ............................................ 143Li, B ........ 13, 16, 18, 24, 42, 43, 51, 59, 61, 76, ... 80, 86, 98, 103, 115, 116, 120, 131, 136Li, C ............................................. 105, 123, 139Li, D ............................. 13, 36, 78, 93, 105, 126Li, F ............................................................. 140Li, G ............................. 23, 37, 61, 79, 107, 108Li, H ................... 44, 53, 79, 104, 113, 131, 142LI, J ............................................................... 40Li, J .................... 12, 20, 30, 32, 37, 39, 61, 63, ......... 76, 86, 110, 112, 113, 122, 123, 143Li, L ................................. 26, 69, 121, 135, 143

Li, M .................... 14, 31, 50, 56, 62, 68, 87, 92, ....... 99, 102, 105, 108, 122, 132, 137, 138Li, N ......................................................... 20, 70Li, Q ............................... 11, 14, 23, 37, 61, 104Li, R ............................................................... 18Li, S ......................................... 10, 55, 101, 132Li, T ................................................. 16, 45, 101Li, W ..................................... 35, 39, 53, 72, 127Li, X ... 16, 35, 36, 53, 63, 65, 71, 128, 130, 141Li, Y .......................... 11, 15, 19, 37, 51, 56, 69, ..................... 72, 73, 88, 89, 106, 123, 142Li, Z ............................. 11, 44, 54, 80, 131, 142Lian, J ............................................................. 103Liane, M ............................................................ 113Liang, L ................................................... 10, 53, 76Liang, S ............................................................... 65Liang, Y ............................................... 19, 120, 142Liangxing, J ......................................................... 39Liao, C ............................................................. 136Liao, H ............................................................... 54Liao, X ............................... 39, 69, 70, 72, 89, 106Liao, Y ....................................................... 21, 104Liaw, P .......................... 12, 13, 18, 26, 27, 37, 46, .............. 55, 56, 64, 65, 67, 69, 73, 83, 93, ...... 94, 101, 110, 117, 127, 134, 135, 143Liebesfeld, J ........................................................ 17Lienert, U ...................................... 26, 27, 101, 117Lifson, M............................................................. 81Ligeski, L .......................................................... 116Lilleodden, E .............................. 13, 26, 27, 46, 64, ............................... 83, 101, 117, 132, 134Lim, A ............................................................... 31Lim, D ....................................................... 13, 117Lim, G ............................................................. 118Lim, H ............................................................... 13Lim, J ......................................................... 13, 82Lim, K ....................................................... 73, 140Lim, N ............................................................. 140Lim, S ....................................... 87, 120, 140, 144Lima, J ............................................................... 54Limao, R ............................................................. 92Limarga, A ........................................................... 50Limodin, N .......................................................... 69Lin, C ......................................................... 47, 66Lin, J ............................................................... 38Lin, K ...................................... 14, 27, 28, 46, 65, ............................... 84, 102, 118, 135, 136Lin, M ......................................................... 11, 47Lin, P ............................................................... 56Lin, T ................................................. 10, 15, 144Lin, Y ................................................... 14, 28, 55Linares, X ............................................................ 65Lindsay, S ............................................................ 35Ling, Z ............................................................... 80Linga, H ...................................................... 96, 112Linger, D ............................................................. 58Lingyun, Y .......................................................... 79Lin Peng, R ......................................................... 65Liou, W ............................................................... 47Lipkin, D ........................................................... 131Lipp, E ............................................................... 66Liqing, C ............................................................. 57Liss, K ..................................................... 101, 102Littlefair, G .................................................. 21, 114Liu, B ................................... 40, 43, 99, 132, 144Liu, C ................. 12, 21, 47, 66, 76, 83, 127, 136Liu, D ......................................... 39, 46, 117, 133Liu, E ............................................................... 65Liu, F ............................................................... 72Liu, G ......................................................... 52, 74Liu, H ....................................................... 79, 100Liu, J ....................... 16, 37, 46, 51, 91, 102, 133

159

IndexLiu, K ..................... 14, 47, 65, 84, 119, 125, 136Liu, L ..................................................... 119, 143Liu, M ......................................................... 23, 32Liu, Q ............................................. 14, 39, 65, 82Liu, R ............................................................... 99Liu, W ................................ 15, 26, 27, 46, 48, 80, ............................... 88, 101, 102, 106, 134Liu, X ................................ 15, 24, 29, 44, 62, 77, ............................... 81, 100, 116, 127, 133Liu, Y .................... 10, 21, 35, 37, 40, 42, 53, 54, ........... 62, 65, 66, 100, 113, 133, 134, 140Liu, Z .......................... 12, 19, 24, 35, 44, 62, 81, ............... 95, 100, 116, 117, 132, 133, 142Livescu, V ................................................. 138, 140Li Yuan, C ......................................................... 120Llubani, S .......................................................... 103Lo, W ............................................................. 103Locatelli, J ........................................................... 74Lodin, J ............................................................... 74Löffler, J .............................................................. 73Logan, S ............................................................ 132Lograsso, T .......................................................... 71Loh, J ....................................................... 54, 126Lohthongkum, G ............................................... 103Lohwongwatana, B ........................................... 103Loiola, R ............................................................. 95Lolies, K .............................................................. 99Lomonaco, R ..................................................... 128London, B ......................................................... 121Long, M............................................................... 11Long, S ......................... 10, 17, 35, 54, 72, 91, 109Long, Z ......................................................... 35, 72Longanbach, S ..................................................... 90Lookman, T ......................................................... 31Lopes, F......................................................... 11, 94Lopez, F .............................................................. 57Lopez, M ....................................................... 21, 36Lopez-Chipres, E .............................................. 106Lopez-Hirata, V ........................................ 143, 144Lorentsen, O ........................................................ 35Lorenz, N ............................................................ 22Lossius, L .............................................. 76, 96, 112Lou, J ............................... 20, 31, 34, 43, 53, 103Lou, X ............................................................. 131Louca, D ...................................................... 18, 110Louhenkilpi, S ..................................................... 24Loutfy, R ................................................. 20, 39, 98Louzguine, D ....................................................... 37Louzguine-Luzgin, D .......................... 55, 110, 127Lovato, M ............................................................ 21Love, D ............................................................... 14Lovicu, G .......................................................... 102Lowe, T ..... 15, 32, 33, 51, 69, 70, 88, 89, 106, 124Lowengrub, J ................................................. 53, 75Lowery, A ...................................................... 75, 94Lu, Bb ............................................................. 108Lu, C ....................................................... 15, 137Lu, G ..................................................... 109, 122Lu, H ............................... 34, 40, 42, 53, 56, 103Lu, J ................................................. 55, 74, 124Lu, K ....................................................... 52, 134Lu, L ............................................................. 134Lu, M ............................................................... 34Lu, P ....................................................... 22, 122Lu, X ....................................................... 91, 133Lu, Y ................................... 16, 20, 53, 103, 117Lu, Z ............................................................. 100Lucas, M ....................................................... 41, 95Ludwig, A ............................................................ 61Ludwig, O ........................................................... 42Ludwig, W .......................................................... 69Luganov, V .......................................................... 63

Lui, T ................................................. 10, 92, 100Luke, M ....................................................... 25, 144Lukes, J ............................................................... 72Lukitsch, M ......................................................... 80Luo, A ..................... 24, 43, 81, 96, 113, 130, 132Luo, H ............................... 10, 34, 43, 53, 71, 113Luo, J ................................................... 20, 38, 75Luo, P ............................................................. 124Luo, S ................................................. 26, 76, 142Luo, W ............................................................... 10Luo, Y ............................................................... 39Luscher, W .......................................................... 90Luton, M ........................................................... 123Lutterotti, L ......................................................... 27Lv, D ............................................................... 55Lv, G ................................................. 11, 91, 140Lv, L ............................................................... 23Lymperakis, L ............................................. 55, 122Lynch, P ............................................................ 134

M

Ma, D ......................................................... 27, 55Ma, E ................................................... 18, 32, 51Ma, H ........................................... 17, 65, 84, 108Ma, J ................... 10, 11, 53, 76, 78, 86, 91, 124Ma, K ..................................................... 119, 120Ma, L ..................................................... 103, 134Ma, N ............................................................... 74Ma, Q ............................................................... 43Ma, X ............................................................. 108Ma, Y ............................................................... 98Maarschalkerwaard, A ......................................... 92MacDowell, A ..................................................... 73Macedo, E ......................................................... 111Machado, D ....................................................... 112Machai, C ............................................................ 78MacKenzie, K ................................................... 137Maddox, B........................................................... 21Madison, J ..................................................... 40, 69Madshus, S .......................................................... 39Maeda, M .............................................. 23, 42, 128Maekawa, K ........................................................ 76Mahajan, D .......................................................... 83Mahapatra, R ....................................................... 97Mahboubi, F ........................................................ 38Mahdipoor, M ..................................................... 38Mahesh, K ........................................................... 37Maheshwari, C .................................................. 123Mahfoud, M ...................................................... 142Maier, H ...................................................... 70, 107Maier, V .............................................................. 52Maijer, D ........................................... 42, 69, 91, 95Maire, E ............................................................... 11Major, R .............................................................. 11Majumder, G ..................................................... 130Mak, K ............................................................... 84Makaya, A ........................................................... 73Maki, A ............................................................. 115Makino, A .......................................................... 142Makino, T .......................................................... 124Mali, S ............................................................... 51Malik, H ............................................................ 107Malik, S ............................................................... 45Mallick, P ............................................................ 62Mallik, P ............................................................ 112Maloney, C ................................................ 110, 117Maloy, S .............................. 25, 102, 118, 135, 136Maltais, J ............................................................. 35Manchiraju, K ................................................... 143Mancosu, R ......................................................... 14Mandal, S ............................................................ 22

Mandavgane, S .................................................... 10Mangu, R............................................................. 34Manivannan, A .......... 24, 44, 62, 81, 100, 116, 133Manivasagam, G ............................................... 130Manjooran, N ........ 10, 16, 34, 53, 70, 90, 107, 125Mann, J ............................................................... 16Manna, I .................................................. 57, 67, 86Mansoor, B ........................................................ 132Manuel, M ................................................... 80, 133Mao, C ............................................................. 139Mao, H ............................................................... 26Mao, J ............................................................... 55Mao, S ........................................... 20, 26, 88, 127Mao, X ............................................................... 23Mao, Y ..................................... 34, 55, 57, 88, 108Mao, Z ............................................................... 15Maocai, W ......................................................... 140Mara, N ....................................... 26, 34, 67, 86, 89Marathe, G .......................................................... 69Marcano, D ......................................................... 24Marceddu, M ..................................................... 129Marchand, P ........................................................ 36Marcoux, A .......................................................... 35Margem, F ........................................................... 94Marian, J ........................................................... 125Marin, E ........................................................ 24, 43Marinica, M ................................................... 14, 50Markovsky, P....................................................... 95Marks, J ............................................................... 35Marques, L .......................................................... 94Marquis, E ................... 30, 48, 67, 85, 86, 118, 120Marshall, P .......................................................... 74Marte, J ....................................................... 70, 124Marthinsen, K ..................................................... 74Martin, C ................................................. 29, 47, 77Martin, D ............................................................. 53Martin, L ............................................................. 95Martin, O ............................................................. 54Martin, P .............................................................. 59Martín-Cortés, G ................................................. 10Martinez, A .................................................... 20, 39Martinez, D ............................................... 131, 142Martinez, E .................................................... 53, 60Martinez, L .................................................... 53, 60Martínez, O ......................................................... 18Martini, A .......................................................... 139Martins, G ........................................................... 23Maruyama, T ..................................................... 140Marx, B ..................................................... 125, 143Marya, M ..................................................... 66, 125Mascarenhas, O ................................................... 76Mason, D ............................................................. 97Mason, T ....................................................... 83, 90Mastorakos, I ........................... 35, 63, 90, 126, 138Masuda, C ................................................... 71, 108Masuda, J .......................................................... 136Masyutin, Y ....................................................... 129Mataya, M ........................................................... 98Matej, Z ................................................... 27, 75, 88Mathaudhu, S ....................... 15, 24, 32, 33, 51, 53, ............... 69, 70, 88, 89, 99, 106, 107, 124Mathon, M......................................................... 118Mathur, A ............................................................ 76Mathur, C .......................................................... 104Matoy, K ............................................................. 59Matsen, M ......................................................... 112Matson, D ...................................................... 63, 77Matsubara, E ..................................................... 102Matsumoto, H ....................................... 89, 95, 141Matsuo, H ............................................................ 39Matsushita, M ..................................................... 74Matsutani, T ........................................................ 29


160

IndexMatsuyama, A ..................................................... 39Matteis, P ...................................................... 37, 57Mattern, N ....................................... 18, 73, 89, 120Matthews, D ........................................................ 50Matthews, V ........................................................ 91Mauger, L ...................................................... 12, 95Maung, K ............................................................ 70Maurer, E .......................................................... 110Mavinakuli, P .................................................... 119Mayama, T ........................................................ 116Mayorga, J ........................................................... 91Maziasz, P ........................................................... 44Mazumdar, D ...................................................... 80Mazumder, J .................................................. 18, 21McBow, I ........................................................... 103McBride, D ................................................. 61, 116McCabe, R .......................................................... 74McCaffrey, J ...................................................... 116McCallum, R ..................................................... 104McClellan, K ................................... 64, 82, 86, 142McColskey, D ..................................................... 62McComb, D................................................. 30, 106McConnell, R ...................................................... 42McCulloch, B ...................................................... 35McCulloch, R ...................................................... 92McCune, R .............................................. 43, 61, 62McDonald, R ................................................. 12, 54McDowell, D ................................... 68, 77, 88, 134McGrath, M ......................................................... 44McHenry, M ...................................................... 125McIntyre, N ....................................................... 102McIntyre, S ......................................................... 26McKay, B ...................................................... 56, 60McKenna, I ......................................................... 69McKindra, T ........................................................ 86McKinney, S ....................................................... 76McKittrick, J ................................................. 36, 55McNaney, J ......................................................... 87McNelley, T......................................................... 89McNulty, I ........................................................... 69McQueen, H ........................................................ 17McQueen, J ......................................................... 98McWhinney, H .................................................. 103Medeiros, M .......................................... 11, 71, 129Medina, F ...................................................... 53, 60Medlin, D .................... 30, 48, 67, 85, 86, 112, 120Medvedev, G ..................................................... 105Medyanik, S .............. 26, 45, 64, 83, 101, 117, 134Mei, J ............................................................... 60Meier, A ............................................................. 116Meier, M ............................................................ 112Meijer, M ............................................................ 54Meinhardt, K ..................................................... 133Meinhradt, K ....................................................... 91Melnyk, C ........................................................... 76Melo, R ............................................................... 73Mélo, T ............................................................. 128Melo-Maximo, D .............................................. 143Melo-Maximo, L ............................................... 143Melville, A........................................................... 95Melzer, C ............................................................. 17Mendelev, M ....................................... 19, 110, 123Méndez, C ........................................................... 94Mendis, C .......................................................... 116Mendoza, A ....................................................... 105Menezes, R .......................................................... 11Meng, T ......................................................... 42, 95Meng, X ............................................................ 141Menyhard, M ..................................................... 122Merkel, S ........................................................... 135Merwade, M ........................................................ 75Meskers, C ................ 49, 68, 86, 87, 104, 121, 137

Meskine, H ........................................................ 127Meslin, E ............................................................. 82Mesquita, A ....................................................... 112Methekar, R ....................................................... 100Meydanoglu, O ......................................... 142, 143Meyer, B ............................................................ 120Meyer, H ............................................. 94, 117, 127Meyer, L ............................................................ 106Meyer, M ........................................................... 118Meyers, M ........................... 21, 36, 55, 89, 93, 109Meyyappan, M .................................................... 70Miao, X ............................................................... 24Miceli, P .............................................................. 46Michael, J ............................................................ 25Michael, M ........................................................ 133Michael, N ......................................... 19, 38, 57, 75Michel, C ............................................................. 34Michiuchi, M ....................................................... 78Michler, J ............................................................ 59Middlemas, M ..................................................... 48Mikhailovskij, I ................................................... 18Milenova, M ...................................................... 108Miles, M ............ 12, 21, 22, 40, 59, 78, 85, 98, 114Milhans, J .......................................................... 105Militzer, M .................................................... 12, 38Miller, A .............................................................. 22Miller, D .............................................................. 77Miller, J ......................................................... 40, 56Miller, M ........................ 12, 18, 21, 26, 30, 57, 79, ....................... 84, 102, 106, 107, 118, 135Miller, R ........................................................ 29, 63Miller, S ............................................................ 130Millett, J .............................................................. 21Millett, P .................................... 53, 63, 75, 88, 139Mills, K ............................................................... 24Mills, M......................... 11, 12, 57, 68, 78, 97, 139Min, C ............................................................... 82Min, G ............................................................. 132Min, X ............................................................. 120Minamino, Y ....................................................... 85Minchenya, V ...................................................... 63Minggang, W ...................................................... 57Mingolo, N .......................................................... 18Minor, A ................................................ 59, 67, 122Minville, R .......................................................... 36Miracle, D ............................................. 37, 96, 110Mirecki-Millunchick, J ..................................... 115Mirihanage, W .................................................... 40Mirnezami, M ..................................................... 12Miroux, A ............................................................ 95Mishin, Y ..................... 12, 14, 38, 48, 85, 105, 139Mishra, B.. 29, 38, 47, 63, 66, 79, 80, 85, 102, 103,

......104, 111, 118, 119, 135, 136, 140, 144Mishra, M ............................................................ 49Mishra, R.............................. 13, 15, 33, 77, 80, 81, ....................... 82, 100, 116, 118, 132, 135Mishra, S ............................................................. 66Misiolek, W ........................................... 43, 99, 132Misra, A ................... 20, 26, 67, 70, 85, 86, 90, 118Misra, D .................. 51, 73, 93, 109, 110, 127, 136Misra, M .............................................................. 56Missalla, M ......................................................... 35Mitchell, J ........................................................... 36Mittal, S............................................................... 10Miura-Fujiwara, E ............................................. 102Miwa, K .............................................................. 73Mladenov, G ...................................................... 143Mo, K ............................................................. 102Mo, Y ............................................................. 134Moat, R ............................................................... 78Modine, N ......................................................... 115Moelans, N .......................................................... 98

Moeslang, A ........................................................ 25Mogilevsky, P ...................................................... 90Mohamed, F .................................. 69, 70, 124, 125Mohamed, M ............................................... 64, 123Mohamed, S ...................................................... 129Mohammad, I ...................................................... 71Mohammadi Zahrani, E .......................... 19, 49, 90Mohammad Mirzaie, M ...................................... 54Mohanty, G ......................................................... 15Mohanty, J ........................................................... 77Mohapatra, M .............................................. 91, 140Mohapatra, S ....................................................... 56Mohles, V .......................................................... 126Mohmaed, A ...................................................... 141Mohney, S ........................................................... 65Mohri, M ............................................................. 90Mohri, T .............................................................. 23Molin, A .............................................................. 96Molodova, X ....................................................... 70Momeni, K .......................................................... 20Momtaz, A ........................................................... 40Mondal, A ............................................................ 29Mönig, R ............................................................. 20Monroe, C ........................................................... 99Monsen, B ........................................................... 76Montalvo, J ............................................... 131, 142Montavon, G ....................................................... 64Monteiro, S ................................ 11, 18, 37, 57, 74, ................................. 94, 95, 111, 120, 128Monteiro-Riviere, N ............................................ 38Montgomery, J .................................................... 13Montoya-Davila, M ............................................. 10Moody, N ...................................................... 45, 59Moon, J ......................................................... 46, 84Moon, K ................................................ 25, 52, 137Moon, M ........................................... 100, 117, 142Moon, R ............................................................ 139Mooney, A ........................................................... 71Moore, D ........................................................... 139Moore, J ................................................ 38, 47, 119Moraes, J ............................................................. 54Morales, F ........................................................... 96Morales, M .......................................................... 27Morales, R ........................................................... 24Moran, J .............................................................. 34Moran-Lazaro, J .................................................. 34Moras, A ........................................................ 35, 36Morcali, H ......................................................... 144Mordehai, D ...................................................... 134Mordi, G .............................................................. 70More, K ............................................................. 117Moreno, H ........................................................... 82Morgan, D ................................... 19, 115, 122, 140Morgan, E............................................................ 73Mori, G ......................................................... 61, 95Mori, M ............................................................... 89Morimitsu, M ...................................................... 23Morisada, Y ....................................................... 142Morita, K ........................................................... 137Morooka, S ........................................................ 145Morral, J ........................................................ 60, 64Morri, A ............................................................... 56Morris, D ................................... 25, 45, 63, 82, 134Morris, J .......................... 45, 59, 65, 110, 118, 122Morris, Jr., J ........................................................ 45Morris, M .......................................................... 130Morris, R ............................................. 84, 106, 112Morsi, K ................................................ 25, 52, 137Mortarino, G ....................................................... 57Morton, T .......................................................... 112Morva, I ............................................................... 56Morvová, M ........................................................ 56

161

IndexMoser, S ............................................................ 121Moseson, A ........................................................ 137Moseson, D ....................................................... 137Moss, S ............................................................... 64Moss, W .............................................................. 51Motang, T .................................................... 12, 141Motta, L ............................................................... 94Mourad, M ........................................................ 129Mourer, D ...................................................... 78, 98Mousavi, S ........................................................ 106Moxson, V ........................................................... 39Mrovec, M ........................................... 50, 120, 140Mu, Y ................................... 10, 53, 71, 113, 130Mubarok, A ......................................................... 18Mueller, A ............................................................ 33Mueller, R ................................................... 74, 140Muhlstein, C ........................................................ 20Mujun, L .............................................................. 25Mukai, T .............................................................. 81Mukherjee, A ................................................. 33, 85Mukherjee, K ...................................................... 66Mukherjee, P ..................................................... 137Mukherjee, S ..................................................... 132Mukherji, D ................................................. 27, 134Mukhlis, R........................................................... 59Mukhopadhyay, S ....................................... 70, 110Mukhter, A .......................................................... 52Mukunda, P ......................................................... 10Mukundan, R..................................................... 117Mulay, R ............................................................ 118Mulheran, P ....................................................... 127Mulholland, M .............................................. 12, 79Mulki, S............................................................... 33Muller, T............................................................ 116Mullner, P .......................................................... 138Mulyukov, R ............................................... 16, 124Mun, D ............................................................... 97Munday, L ......................................................... 139Munoz, D ............................................................ 54Munoz, J ........................................................ 41, 95Munroe, P ................................................ 19, 21, 31Muntele, C ............................................. 26, 82, 127Mura, A ............................................................. 129Murashkin, M ...................................................... 32Murch, G ............................................... 14, 15, 105Murphy, C ........................................................... 20Murr, L ................................................. 53, 60, 108Murray, B ............................................................ 58Murray, C ............................................................ 83Murthy, T........................................................... 140Murty, B .............................................................. 70Murty, K ................................................ 45, 85, 118Musil, J ......................................................... 27, 75Musinski, W ........................................................ 77Muthukumaran, S ................................................ 10Myers, B .............................................................. 51Myers, D ............................................................. 39Mylvaganam, S ................................................. 113Myrbostad, E ..................................................... 128

N

Na, H ....................................................... 27, 135Na, L ............................................................... 47Naab, F ............................................................... 62Nadakuduru, V .............................................. 52, 58Naderi, M .......................................................... 142Nadgorny, E ...................................................... 138Nadler, J ............................................................ 119Nadot, Y .............................................................. 91Nag, S ................................. 11, 30, 128, 141, 142Nagai, T ................................................. 23, 42, 128

Nagaoka, T ........................................................ 142Nagaraj, C ......................................................... 102Nagasekhar, A ................................. 15, 80, 99, 107Nagaumi, H ......................................................... 94Naidoo, K ............................................................ 61Naik, A ............................................................... 90Naim, F ............................................................. 126Nair, A ............................................................. 117Naixiang, F ...................................... 11, 72, 92, 129Nakagawa, T ....................................................... 28Nakai, M ............................................................. 95Nakai, Y .............................................................. 93Nakamori, Y ........................................................ 80Nakamoto, M .................................................... 142Nakayama, H ..................................................... 131Nakayama, K ....................................................... 73Nam, H ............................................................. 140Nam, K ....................................................... 10, 144Nam, S ............................................................... 13Nam, W ....................................................... 15, 141Nambu, S............................................................. 78Namgung, J ....................................................... 128Namgung, S............................................. 15, 32, 51Nandy, T ............................................................ 130Nanninga, N .......................................... 18, 91, 109Nanstad, R ........................................................... 45Napolitano, R ........................................ 58, 60, 127Narasimhan, N .............................................. 10, 12Narasimhan, S ..................................................... 30Narayan, R ............................ 19, 38, 49, 57, 75, 93Narayanan TSN, S......................................... 31, 49Narayani, N ......................................................... 92Narendranath, N .................................................. 10Naritsuka, S ....................................................... 140Nascimento, D ..................................................... 94Naser-Zoshki, H ............................................ 19, 74Nasipuri, M ....................................................... 121Nasirizadeh, M .................................................. 125Nastasi, M ........................................... 85, 118, 139Natarajan, T ....................................................... 116Natesan, K ......................................................... 102Nath, S ............................................................... 51Navid, A ...................................................... 57, 104Nawathe, S ........................................................ 103Nayak, B ............................................................. 79Nayak, S .............................................................. 51Nayaka, H ......................................................... 132Nayar, V .............................................................. 93Nazari, A ............................................................. 37Nazarov, A ................................................... 16, 124Nazarov, K .......................................................... 16Necker, C ............................................................ 89Needleman, A .............................................. 31, 105Neelakantan, S .......................................... 130, 141Neelameggham, N ...................... 13, 24, 43, 56, 61, ............... 62, 80, 81, 91, 99, 111, 116, 132Nees, J ............................................................. 123Nekahi, A ..................................................... 54, 109Neklyudov, I ........................................................ 18Nele, M ............................................................... 71Nelson, A ........................................................... 102Nelson, K .......................................................... 123Nelson, L ............................................................. 23Nelson, P ............................................................. 68Nelson, T ............................................................. 92Nemoto, N ........................................................... 28Nerikar, P .................................................... 30, 120Neu, C ............................................................... 93Neu, R ............................................................. 131Neugebauer, J ........ 14, 15, 41, 48, 55, 79, 113, 122Neves, G .............................................................. 11Newhouse, R ................................................. 12, 41

Newman, R ....................................................... 102Newton, M ........................................................ 117Ng, H ............................................................... 42Ngai, E ............................................................... 17Nguyen, J .................................................... 25, 120Nguyen, L ...................................................... 45, 65Nguyen, T ...................................................... 15, 93Nguyen, V ........................................................... 61Nguyen-Manh, D ........................................ 50, 108Ni, P ......................................................... 11, 91Ni, S ............................................................... 70Nicholson, A ........................................................ 87Nicholson, D ....................................................... 91Nichtova, L .................................................... 27, 75Nickolai, I ......................................................... 143Nicola, L .............................................................. 64Nie, J ......................................................... 62, 81Nie, X ............................................................... 99Nie, Z ............................................... 65, 117, 133Niechajowicz, A .................................................. 99Nieh, T ......................................................... 37, 67Niehoff, T ............................................................ 77Niendorf, T .......................................................... 70Niezgoda, S ................................................... 69, 88Niinomi, M .................................................. 95, 112Nikitina, S ......................................................... 121Nikles, D ............................................................. 71Nikolaeva, E ........................................................ 72Nikolic, I ............................................................. 87Nikolic, S ............................................................ 61Nikolov, S ........................................................... 55Nili Ahmadabadi, M ...................................... 51, 88Ning, X ............................................................... 39Ningileri, S .......................................................... 35Ninomiya, N ........................................................ 80Nishikawa, H ..................................................... 135Nishimura, T ............................................... 71, 136Nishino, Y ......................................................... 102Nishio, T ............................................................ 131Niu, L ............................................................. 141Niu, Q ......................................................... 39, 82Niu, X ............................................................... 27Nix, W ............................................................... 59Nixon, M ............................................................. 97Niyomwas, S ....................................................... 39Nnabuchi, M ..................................................... 128Nóbrega, K ........................................................ 128Noda, M ............................................................ 116Noebe, R ..................................................... 57, 114Nogaret, T ......................................................... 123Noldin, J .............................................................. 56Nordmark, A ...................................................... 129Northover, S ........................................................ 75Norton, G ............................................................ 30Norton, M .......................................................... 130Nose, Y ............................................... 12, 111, 112Novak, P .............................................................. 87Novitskaya, K ..................................................... 55Noyan, I ............................................................... 83Noyes, M ........................................................... 127Nozu, T ............................................................. 136Nunn, S ............................................................... 58Nunner, G ............................................................ 56Nutt, S ....................................................... 89, 103Nuzzo, R ........................................................... 113Nyberg, E ............................. 13, 24, 39, 43, 61, 62, ............. 80, 81, 96, 99, 113, 116, 130, 132Nychka, J ............... 11, 17, 36, 55, 73, 93, 109, 127Nyirenda, K ......................................................... 85Nyland, G ............................................................ 35


162

IndexO

O’Connor, M ....................................................... 97O’Donnell, R ....................................................... 64O’Keefe, M ................................................... 65, 86O’Brien, E ......................................................... 103O’Brien, J ................................................ 48, 56, 89Obasi, G .............................................................. 78Obbard, R .......................................................... 128Oberson, G ............................ 25, 45, 47, 63, 82, 85Ocelik, V ....................................................... 30, 50Ochs, T ............................................................. 111Ochulor, F ..................................................... 47, 85Oda, M ............................................................... 71Odabasi, A ......................................................... 142Oder, G ............................................................... 24Odette, G ............................................... 25, 45, 118Ofzidani, I ........................................................... 63Ogasawara, T .................................................... 120Ogawa, F ..................................................... 71, 108Ogunseitan, O ..................................................... 87Ogura, K .............................................................. 56Oh, C ....................................................... 21, 140Oh, J ............................................................... 37Oh, K ....................................................... 21, 131Oh, S ............................................................. 103Oh, T ............................................................. 133Oh, Y ............................................................... 84Oh-ishi, K .......................................................... 116Ohashi, T ........................................................... 122Ohnishi, Y ........................................................... 89Ohodnicki, P ...................................................... 125Ohriner, E ............................................................ 29Ohya, T ............................................................. 113Oi, T ............................................................. 112Ojo, I ......................................................... 26, 82Ojo, V ............................................................... 54Okabe, T ............................................ 112, 128, 137Okamoto, N ....................................................... 122Okijava, L .......................................................... 141Oktay, G .................................................... 111, 116Okubo, T ............................................................. 22Okuniewski, M .............................................. 87, 95Okuyama, N ........................................................ 76Olbricht, J ............................................................ 24Olevsky, E ........................................................... 55Olivas-Martinez, M ........................................... 116Olivetti, E .............................................. 68, 87, 104Olmsted, D ................................................ 105, 139Olson, D .................................... 29, 47, 66, 80, 144Olson, G ...................................... 74, 124, 137, 138Oniashvili, G ............................................. 125, 142Ono, T ............................................................... 73Onsoien, M ........................................................ 129Opalka, S ........................................................... 133Oppedal, A ........................................................... 43Oren, E ....................................................... 17, 127Orlov, D ............................................................... 52Orlova, Y ............................................................. 76Ortiz, M ............................................................. 123Ortiz-Cuellar, E ................................................. 106Oryshchyn, D .................................................... 111Osborne, W ......................................................... 30Ose, S ............................................................... 36Osen, K ......................................................... 20, 30Osenbach, J ................................. 14, 119, 135, 136Osetskiy, Y .................................................. 67, 134Osetsky, Y ......................................................... 122Oshiumi, N .......................................................... 23Oster, N ............................................................. 104Osterberg, D ...................................... 125, 143, 144Österle, W ........................................................... 24

Østrem, Ø .......................................................... 144Osuna, T .............................................................. 33Oswald, K ........................................................... 61Ott, E ..................................... 21, 58, 77, 97, 131Ott, R ............................................................... 27Ou, J ............................................................... 90Ou, Y ............................................................... 49Ouchi, M ............................................................. 85Ourdjini, A........................................................... 72Ouyang, L .......................................................... 110Ovecoglu, M ....................................................... 71Öveçoglu, M ..................................................... 141Overman, N ......................................................... 90Owate, I ............................................................. 128Oye, B ............................................................. 129Ozavar, S ............................................................. 25Ozkal, B ...................................... 53, 141, 143, 144Özkan, S .............................................................. 40Ozolins, V ........................................................... 60

P

Packard, C ........................................................... 59Padap, A .............................................................. 51Padhi, P ................................................. 83, 86, 143Padilla, H ............................................................. 33Padilla, R ................................................. 23, 61, 79Padron, I .............................................................. 75Padula, S ..................................................... 57, 114Paidar, V .............. 14, 31, 50, 68, 87, 105, 122, 138Paital, S ............................................................... 49Paiva, A ............................................................. 111Pakzad, A ............................................................. 20Pal, U ............................................................... 43Paladugu, M ...................................................... 124Palafox-Hernandez, J .......................................... 22Palanisamy, S .................................................... 124Palauqui, J ........................................................... 11Palberg, T ...................................................... 22, 60Paliwal, M ......................................................... 116Pallavkar, S ....................................................... 144Palmer, M .......................................... 113, 129, 140Palsson, H ........................................................... 35Palumbo, M ......................................................... 95Palumbo, R .......................................................... 91Pan, D ............................................................... 40Pan, X ............................................................... 60Pan, Z ............................................................... 51Pandey, A ............................................................. 17Pandey, B .......................................................... 138Pandey, J ..................................................... 18, 141Panfilov, P ........................................................... 87Pang, S ............................................................... 94Panov, A ........................................................ 54, 71Pantleon, K .......................................................... 46Pantsyrny, V ........................................................ 48Pao, C ............................................................. 122Pao, P ................................................... 72, 76, 91Papanikolaou, S ............................................. 14, 68Papin, P ....................................................... 21, 114Pappula, L ................................................. 141, 144Paradies, A ........................................................... 67Paras, J ......................................................... 53, 90Parasivamurthy, P .............................................. 120Pareige, P ........................ 25, 30, 82, 107, 118, 135Parga, C ............................................................... 66Parga, J ............................................................... 23Park, B ............................................................... 12Park, C ......................... 57, 70, 106, 112, 129, 140Park, E ....................................................... 18, 140Park, H ............................................................. 103Park, J ............. 17, 34, 63, 73, 131, 142, 143, 144

Park, K ..................................................... 104, 141Park, M ............................................................. 118Park, N ......................................... 10, 84, 140, 143Park, S ..................................................... 131, 141Park, Y ......................... 28, 85, 116, 117, 118, 140Parker, G ........................................................... 126Parker, R ...................................................... 14, 136Parker, W ........................................................... 122Paromova, I ......................................................... 71Parra, M ............................................................... 86Parra Garcia, M ................................................... 64Parson, N ............................................................. 72Parthasarathy, T ................................... 90, 106, 123Patala, S ............................................................... 86Patel, L ............................................................... 98Patel, M ............................................................... 25Patel, P ............................................................... 39Pathak, D ............................................................. 86Patrick, L ........................................................... 122Patselov, A ......................................................... 122Pattabhiraman, H ................................................. 10Patterson, B ......................................................... 38Patzer, G .............................................................. 43Pawlek, R ............................................................ 72Payton, E ............................................................. 12Peaslee, K ............................................................ 44Pech-Canul, M .............................. 10, 90, 108, 114Pedigo, A ........................................................... 135Pedron, E ............................................................. 84Pegg, I ............................................................. 133Pei, F ............................................................. 104Pei, Y ............................................................... 50Pekguleryuz, M ................................................... 62Pellin, M .............................................................. 38Pelton, A ........................................................ 63, 81Peng, C ........................................... 20, 53, 84, 103Peng, L ................................................. 24, 80, 100Peng, Q ....................................................... 81, 143Peng, R ............................................................. 145Peng, S ............................................................... 47Peng, T ............................................................... 81Peng, Z ............................................................... 42Pengfei, Y .................................................... 96, 113Perales-Pérez, O ................................................ 119Peralta, P ..................... 47, 64, 82, 86, 97, 141, 142Pereloma, E ......................................................... 32Perepezko, J .......................... 22, 41, 60, 66, 73, 78Peretti, M ....................................................... 58, 59Perez, D ....................................................... 67, 122Perez, E ..................................................... 118, 135Pericleous, K ......................................... 24, 80, 116Perkins, J ........................................................... 144Persson, K ........................................................... 79Perugini, A......................................................... 103Peshwe, D ..................................................... 10, 90Peter, D ............................................................... 11Peter, W ............................................................... 58Petersen, M ....................................................... 112Peterson, E ........................................................ 103Peterson, M ......................................................... 95Peterson, R .......................................................... 77Petford-Long, A ................................................... 74Petkov, V ........................................................... 117Petrolito, J ........................................................... 96Petrov, M ............................................................. 55Petrusenko, Y ...................................................... 18Petter Moxnex, B .............................................. 113Pettifor, D ................................................ 23, 31, 50Petukhou, Y ......................................................... 67Petzold, V .......................................................... 121Phadke, S............................................................. 16Pharr, G ............................................... 45, 101, 127

163

IndexPhatak, C ............................................................. 74Phillion, A ........................................................... 42Phillips, A .......................................................... 109Phillips, E .......................... 34, 54, 71, 91, 108, 126Phillips, P ...................................................... 12, 78Phillpot, S .......................................................... 120Philo, S ............................................................... 93Picard, D ............................................................. 39Pierce, C .............................................................. 16Pikart, P ............................................................... 27Pilchak, A ...................................................... 33, 98Pinal, R ............................................. 105, 123, 139Pinayev, A ......................................................... 129Pinoncely, A ........................................................ 96Pint, B ......................................................... 25, 44Pipe, L ............................................................... 21Pipes, R ............................................................. 105Pippan, R ........................................... 15, 29, 51, 89Pirayesh, H .......................................................... 36Pires, R ............................................................... 92Pirling, T ........................................................... 135Pisutha-Arnond, N ............................................ 117Pitchure, D .......................................................... 62Pitman, S ............................................................. 90Plascencia, G ....................................................... 94Pledger, B ............................................................ 62Pleydell-Pearce, C ............................................... 78Plikas, T ............................................................ 111Plunkett, B........................................................... 97Podmaniczky, F ................................................... 41Pokorny, M .......................................................... 99Pokrajcic, Z ....................................................... 104Pol, V ............................................................... 47Polesak, F .................................................... 13, 133Politis, C ............................................................ 125Pollak, I ............................................................... 50Pollock, T .. 40, 69, 97, 98, 116, 123, 131, 132, 134Polonsky, A ....................................................... 133Pomykala, J ............................................... 104, 120Pond, D ............................................................. 126Pond, R ............................................................. 105Pontikes, Y ........................................................ 104Poole, W .................................................. 12, 41, 72Poorganji, B ........................................................ 88Pope, D ............................................................... 31Popov, A .............................................................. 32Poquette, B .... 10, 16, 34, 53, 70, 90, 107, 125, 133Porras, A ............................................................ 102Portela, T ............................................................. 94Portillo, B ............................................................ 66Pouchon, M ......................................................... 25Pougis, A ............................................................. 52Poulsen, H ........................................................... 26Poulsen, S ............................................................ 69Pourboghrat, F..................................................... 48Powell, A ..................................................... 43, 121Powell, B ..................................................... 80, 100Powell, C ............................................................. 24Power, G ...................................................... 54, 126Powers, M ........................................................... 84Pozas, D .............................................................. 34Pozas-Zepeda, D ................................................. 34Pozzi, C ....................................................... 67, 112Prabaharan, S .............................................. 70, 133Prabhakaran, R ................................ 25, 26, 82, 118Prabhu, B....................................................... 10, 15Prabhu, N ............................................................ 92Prabhu, S ............................................................. 92Prabu, T ............................................................. 104Pradhan, D ........................................................... 96Prahl, U ............................................................... 66Prakash, D ........................................................... 78

Prakash, S .................................................... 75, 114Prangnell, P ................................................... 21, 70Prasad, A ........................................................... 111Prasad, Y ............................................................. 62Preuss, M................................................. 12, 13, 78Price, P ................................................. 12, 55, 118Priddy, M ........................................................... 142Prillhofer, B ................................................. 74, 128Prillhofer, R ......................................................... 17Prinsloo, P ........................................................... 91Prive, D ............................................................... 36Priyadarshini, B ................................................... 57Proffen, T .......................................................... 117Provatas, N ............................................ 38, 72, 141Proville, L ............................................................ 68Pu, Z ............................................................. 133Puckett, J ............................................................. 68Puleo, D............................................................. 133Pun, G ............................................................... 14Puncreobutr, C ............................................ 56, 103Purcek, G ................................................. 51, 52, 54Puscasu, R ........................................................... 83Pusztai, T ............................................................. 41Puthoff, J ........................................................... 110Putilin, A ............................................................. 98Pyshkin, S ......................................................... 129Pyzalla, A ............................................................ 27

Q

Qi, L ............................................................. 122Qi, X ............................................................... 55Qi-feng, G ........................................................... 72Qian, D ............................................................... 34Qian, J ............................................................... 88Qian, L ............................................................... 60Qian, M ................................................... 41, 76, 78Qian, S ......................................................... 19, 86Qiang, J ............................................................. 142Qiao, D ............................................................... 18Qiao, J ............................................................... 56Qidwai, M ........................................................... 69Qidwai, S............................................................. 88QiJie, Z ............................................................. 141Qin, C ............................................................... 56Qin, H ............................................................. 141Qin, Z ............................................................... 83Qing, X ............................................................... 61Qinghong, T ...................................................... 109Qinghua, T .......................................................... 87Qingsheng, L ..................................................... 104Qingxiu, J .......................................................... 104Qiu, G ............................................................... 79Qiu, S ................................................. 39, 73, 114Qiu, X ............................................................. 144Qiusong, G ........................................................ 141Qiyuan, C .......................................................... 112Qu, J ............................................................... 66Qu, P ............................................................. 114Quach, D ............................................................. 71Quan, B ............................................................. 115Quek, J ............................................................... 75Quek, S ............................................................... 64Quelennec, X ....................................................... 81Quinn, G .............................................................. 77Quinta da Fonseca, J ..................................... 12, 78Quintana, O ......................................................... 82

R

Raabe, D ...................................................... 55, 113Raahauge, B ................................................ 35, 108

Rabenberg, E ............................................... 12, 118Rabkin, E ..................................................... 24, 134Rachlitz, R ........................................................... 17Rack, H ............................................. 20, 32, 33, 76Rack, P ............................................................... 67Raddad, B .................................................... 97, 140Radeker, W .......................................................... 30Radetic, T ............................................................ 67Radiguet, B ..................... 25, 30, 82, 107, 118, 135Radis, R ............................................................... 12Radmilovic, V ..................................................... 48Rae, C ............................................................. 139Rae, P ............................................................... 21Raeisinia, B ........................................... 13, 43, 133Raghavendra, K ................................................... 36Raghunathan, S ........................................... 20, 135Rahate, M .................................................... 82, 136Rahbar, N .................................................... 73, 127Rahman, S ........................................................... 82Raj, M ....................................................... 18, 141Raj, R ....................................................... 46, 102Raj, S ............................................................... 53Raj, V ............................................................. 134Raja, H ............................................................... 10Rajagopalan, S ...................... 11, 30, 124, 141, 142Rajamanickam, A .............................................. 130Rajan, K ................................................ 15, 79, 121Rajaputra, S ......................................................... 34Rajgarhia, R ........................................................ 67Rajkumar, T ....................................................... 107Rakowski, J ....................................................... 117Ram, S ............................................................. 128Ramachandran, M ............................................... 39Ramadass, A ........................................................ 75Ramadesign, V .................................................. 100Ramalingam, G ................................................... 10Ramamurthy, S .................................................. 102Ramamurti, R ...................................................... 49Ramamurty, U ..................................................... 93Raman, A ........................................................... 139Raman, J .............................................................. 36Ramesh, K ..................................... 40, 51, 106, 108Ramesh, R ........................................................... 95Ramirez, F ......................................................... 109Ramirez, G .......................................................... 79Ramirez, J ........................................................... 45Ramirez Lopez, P ................................................ 24Ramones, J ........................................................ 109Ramos, K..................................................... 83, 123Ramsey, G ......................................................... 112Ramulu, M ........................................ 130, 141, 144Ramuni, V ........................................................... 51Randall, N ......................................................... 128Rankin, W ......................................................... 121Rao, A ............................................................... 92Rao, K ............................................................... 20Rao, M ............................................................... 61Rao, R ............................................................... 71Rao, S ............................................... 45, 123, 138Raoufi, M ............................................................ 38Raphael, J .......................................................... 143Rapheal, G ........................................................... 61Rashkeev, S ................................................... 87, 95Rasmussen, K .................................................... 105Ratke, L ......................................................... 54, 79Ratvik, A ............................................... 58, 76, 112Rausch, B .......................................................... 126Ravindra, N ....................................... 19, 38, 57, 75Ray, P ................................................. 66, 77, 131Raynova, S .......................................................... 58Read, C ....................... 35, 36, 54, 72, 92, 109, 126Read, D ............................................................... 40


164

IndexReade, N .............................................................. 43Ready, J ......... 10, 16, 34, 53, 70, 90, 107, 125, 145Reavis, R ........................................................... 125Rebak, R .............................................................. 45Reddy, K ............................................................. 29Reddy, N ............................................... 15, 97, 112Reddy, R ...................... 39, 47, 56, 76, 96, 117, 119Redkin, A............................................................. 72Reed, E ............................................................. 115Reed, M ..................................................... 103, 137Reedy, E ........................................................ 59, 77Reggiani, B ......................................................... 54Reglitz, G ............................................................ 69Reiber, H ............................................................. 22Reichert, H .......................................................... 41Reif, R ............................................................... 84Reilly, C .............................................................. 96Remmert, J .......................................................... 47Ren, B ............................................................. 126Ren, I ............................................................... 56Ren, Y ............................. 18, 37, 65, 83, 117, 135Ren, Z ....................................................... 72, 144Renavikar, M ............................................. 102, 103Renshaw, C ......................................................... 87Restrepo, O ................................................. 64, 137Rethoré, J ............................................................ 69Rettenmayr, M .............................................. 44, 78Reusch, F........................................................... 128Reuter, M ........................ 49, 68, 86, 104, 121, 137Reyes, J ............................................................... 34Reyes-Gomez, J .................................................. 34Reynolds, H....................................................... 136Reynolds, R ....................................................... 143Rezaeian, A ................................................. 59, 114Rezaie, H ........................................................... 143Rhamdhani, M ..................................................... 59Rhim, W ............................................................ 112Rhodes, K .......................................... 113, 133, 143Rhym, Y .............................................................. 47Riani, A ............................................................. 108Rice, B ............................................................. 139Richard, D ........................................................... 92Richard, M .......................................................... 96Richards, V .................................................... 25, 44Richardson, C .................................................... 125Richardson, T .................................................... 133Richter, G ............................................................ 20Ricker, R ....................................................... 62, 86Ridgway, M ......................................................... 48Rieger, T .............................................................. 44Rieken, J ...................................................... 59, 135Riella, H .............................................................. 68Riley, D ............................................................... 14Rimoli, J ............................................................ 123Ring, T ............................................................. 116Ringer, S ................................................ 70, 89, 106Ringnalda, J ......................................................... 30Rink, D ............................................................. 102Rinn, R ............................................................. 126Rios, O ......................................................... 13, 40Rios, P ............................................................... 74Rishabh, A ......................................................... 125Ritchie, R .............................. 55, 71, 73, 77, 87, 93Ritter, A ....................................................... 27, 116Ritter, C ....................................................... 54, 109Ritter, Y ............................................................. 127Rivera-Diaz-del-Castillo, P ................... 63, 75, 130Rivero, R ............................................................. 75Ro, Y ............................................................... 15Roach, S .............................................................. 42Robach, O ......................................................... 102Robbins, M ........................................................ 110

Roberts, A .......................................................... 144Roberts, C ........................................................... 38Roberts, J....................................................... 75, 94Robertson, I ............................................... 143, 144Robinson, A ......................................................... 26Robinson, B......................................................... 58Robinson, I ........................................................ 117Robson, J ............................................................. 70Rockward, T ...................................................... 117Rodiers, B ........................................................... 98Rodney, D ............................................. 37, 68, 110Rodriguez, A ....................................................... 98Rodriguez, F ........................................................ 49Rodriguez, R ................................................. 11, 94Rodríguez-Baracaldo, R ...................................... 69Rodriguez-Diaz, R ............................................ 143Rodriguez-Hornedo, N ...................................... 123Roesner, H ................................................... 69, 127Roessler, D .......................................................... 21Rogge, R ........................................................... 134Roh, H ............................................................. 119Rohan, P .............................................................. 61Rohatgi, A ......................................................... 132Rohrer, G ......................................... 32, 48, 86, 101Rokkam, S ..................................................... 63, 75Rolandi, M .......................................................... 17Rolim, D .............................................................. 77Rollett, A .............................. 11, 32, 35, 38, 50, 69, ......................... 86, 87, 101, 106, 123, 139Rolseth, S ............................................................ 30Romberg, J ........................................................ 120Romero, T ........................................................... 25Romero-Serrano, A ........................................... 104Rong, Y ............................................................... 44Rood, M ............................................................ 110Roos, B ............................................................... 20Root, J ............................................................... 72Roriguez, F .......................................................... 36Rørvik, S ........................................................... 112Rosalie, J ............................................................. 81Rose, D ............................................................... 36Rosefort, M ......................................................... 17Rosenberger, M ..................................... 31, 49, 143Rosenkilde, C .................................................... 144Rösler, J ............................................................... 41Ross, J ............................................................... 35Rossiter, J ............................................................ 80Rossol, M .......................................................... 142Roth, R ............................................................... 68Roth, S ......................................................... 18, 65Rottler, J .............................................................. 38Rottmann, P ....................................................... 102Roubidoux, J ............................................... 29, 144Roué, L ....................................................... 76, 144Rounaghi, A......................................................... 44Rounaghi, S ......................................................... 18Roux, S ............................................................... 69Roven, H ................................................. 15, 32, 74Rowenhorst, D ............ 32, 50, 69, 74, 87, 106, 123Rowland, R ......................................................... 90Roy, A ............................................................. 116Roy, I ....................................... 89, 119, 124, 125Roy, M ......................................................... 74, 91Roy, S ............................................................. 103Rozak, G ................................................. 29, 48, 66Rozas, R .............................................................. 22Rozenak, P .................................................. 27, 109Ruan, H ............................................................. 124Ruano, O ............................................................. 89Rubio, M ............................................................. 94Rudman, K .......................................................... 86Ruehle, M .......................................................... 105

Rugg, D ............................................................... 78Ruiz, A ............................................................. 109Ruiz, M ................................................... 23, 61, 79Rundman, K ........................................................ 18Russell, K ................................ 12, 21, 57, 107, 118Russo Spena, P .................................................... 37Rutlin, J ......................................................... 39, 59Ruud, J ............................................................. 109Ryabov, D ............................................................ 80Rye, K ....................... 35, 39, 58, 76, 96, 112, 129Ryu, Y ............................................................. 130

S

Sa, Y ....................................................... 46, 142Saavedra, J ........................................................ 107Sabau, A ...................................................... 58, 100Sabbadini, S ........................................................ 59Sachan, R .............................................. 67, 93, 107Sachdev, A ................................. 31, 57, 80, 81, 100Sachs, C............................................................... 55Sadawy, m ......................................................... 142Sadeghi Meresht, E ........................................... 142Sadler, B ............................ 39, 58, 76, 96, 112, 129Sadoway, D ....................................................... 115Saevarsdottir, G ........................................... 35, 112Safarkhanian, M ................................................ 115Safiullin, R ........................................................ 124Saglam, C ............................................................ 25Saha, P ............................................................... 99Saha, S ............................................................... 19Sahaym, U ......................................................... 130Saheet, H ........................................................... 114Sahoo, M ............................................................. 72Saida, J ............................................................... 74Saigal, A .................................................. 44, 63, 77Saimoto, S ......................................................... 101Sajjad, M ........................................................... 119Sakai, T ......................................................... 29, 80Sakidja, R ............................................................ 66Sakulich, A ........................................................ 137Sakurai, H ........................................................... 46Sakurai, T ............................................................ 73Salamanca-Riba, L ...................................... 74, 109Salazar-Villalpando, M ..................................... 111Saldana, C ........................................... 70, 107, 140Salehinia, I .................................................... 64, 83Salem, H .............................................................. 90Salerno, K ......................................................... 110Saliklis, E .......................................................... 140Salishchev, G ....................................................... 78Saliwan-Neumann, R .......................................... 24Salleo, A .............................................................. 16Salman, O ............................................................ 98Samad, J ............................................................ 109Samajdar, I .......................................................... 33Samal, G ............................................................ 129Samaras, M ................................................... 25, 63Samarov, V .......................................................... 58Sammakia, B ..................................................... 130Samonds, M ........................................................ 35Sampaio, J ............................................. 11, 71, 129Sampson, E ................................................... 33, 76Samudrala, R ....................................................... 17Samvedi, V ................................................ 105, 120Sánchez, C ........................................................... 94Sanchez, F ......................................................... 144Sanchez, J ............................................................ 22Sand, U ............................................................... 74Sandala, R ........................................................... 12Sander, A ........................................................... 104Sander, F ..................................................... 93, 110

165

IndexSanders, D ..................................................... 78, 98Sandim, H ........................................................... 88Sandlöbes, S ...................................................... 100Sangid, M ............................................................ 14Sanjari, M .......................................................... 100Sanjay, K ........................................................... 132Sankaran, R ....................................................... 122San Marchi, C ..................................................... 63Sanni, O............................................................... 85Sano, T ............................................................... 13Santafe, H ............................................................ 11Santala, M ........................................................... 48Santana, L ............................................................ 11Santella, M ........................................................ 132Santhanakrishnan, S .................................... 42, 140Santiago, R ........................................................ 111Santos, N ............................................................. 94Santos, R ............................................................. 71Santos, S ............................................................ 120Saotome, Y .......................................................... 56Sapper, E ........................................................... 121Saray, O ................................................... 51, 52, 54Sargent, G............................................................ 78Sarikaya, M ... 11, 17, 36, 55, 73, 93, 109, 110, 127Sarkar, A ...................................................... 33, 137Sarkar, S ............................................................ 130Sarkis, Y .............................................................. 92Sarobol, P .......................................................... 135Sasaki, H ............................................................. 23Sasaki, T ............................................................ 112Sastri, B ............................................................... 56Sathyavageeswaran, S ....................................... 130Sato, H ............................................................. 102Sato, K ............................................................... 95Sato, M ............................................................... 55Sato, Y ....................................................... 39, 142Satyanarayana, K ................................................ 94Saucedo-Muñoz, M ........................................... 144Sauvage, X ............................................ 32, 48, 101Savage, R .......................................................... 121Save, S ............................................................... 35Savelieva, O ...................................................... 130Savvakin, D ......................................................... 58Sawyer, G .......................................................... 119Saxena, A ............................................................. 67Scardi, P .............................................................. 83Scattergood, R ..................................................... 51Scavino, G ........................................................... 57Schade, D ............................................................ 65Schaefer, J ........................................................... 26Schäfer, C .......................................................... 126Schaffer, G .......................................................... 76Schafler, E ........................................................... 83Schafrik, R .......................................................... 22Scheller, P............................................................ 80Schelling, P ....................................................... 120Schen, M ........................................................... 113Scheriau, S .......................................................... 51Schestakow, I .................................................... 100Schimmel, G ....................................................... 44Schlieter, A .................................................... 41, 48Schlom, D ........................................................... 95Schmetterer, C ............................................... 84, 85Schmid-Fetzer, R ............ 22, 24, 41, 60, 62, 78, 80Schmidt, T ........................................................... 74Schmidtmeier, D ................................................. 42Schmitt, B ......................................................... 101Schmitz, G ........................................................... 30Schnapp, D .......................................................... 17Schneider, A ........................................................ 92Schneider, I ....................................................... 106Schneider, J ....................... 17, 21, 77, 97, 106, 131

Schneider, W ....................................................... 41Schneller, M ...................................................... 126Schnitzlbaumer, J ................................................ 17Schoenfeld, B ...................................................... 64Schoenung, J .............................. 15, 25, 51, 85, 87, ................................. 88, 89, 106, 119, 120Schøning, C ......................................................... 59Schöpe, H ...................................................... 22, 60Schramm, J .......................................................... 55Schroeder, S ........................................................ 76Schroers, J ......................................... 18, 55, 56, 73Schroth, J............................................................. 31Schubert Severo, D ........................................... 112Schuh, C .......................................... 37, 70, 86, 110Schulson, E ......................................................... 87Schulte, A ............................................................ 25Schulz, W ............................................................ 24Schumacher, P ............................................... 56, 60Schuren, J ............................................................ 84Schuster, B .................................................... 51, 70Schütze, M ........................................................ 113Schvezov, C ..................................... 25, 31, 49, 143Schwandt, C .......................................... 16, 20, 128Schwarz, P ........................................................... 92Schwen, D ........................................................... 58Scott, S ............................................................... 35Seal, S ....................................... 14, 30, 49, 67, 86Sears, J ..................................... 20, 39, 58, 59, 112Sediako, D ..................................................... 62, 72Sedlmayr, A ......................................................... 20Seefeldt, M .......................................................... 88Seelam, U ............................................................ 33Seetharaman, S ...................... 63, 99, 100, 111, 145Sehitoglu, H ........................................................ 14Sei, N ............................................................... 93Seidler, S ........................................................... 119Seidman, D .... 12, 15, 17, 41, 48, 79, 105, 106, 144Seif, M ............................................................... 26Seifert, H ....................................................... 13, 40Seifi, M ............................................................. 142Seiser, B .............................................................. 31Sekar, A ............................................................... 15Sekkingstad, A..................................................... 59Sekunowo, O ....................................................... 47Selvaraj, P ........................................................... 12Semiatin, L ............................................ 78, 98, 120Semiatin, S ................................. 15, 32, 33, 51, 69, ............................. 70, 88, 89, 98, 106, 124Senkov, O ............................................................ 37Senthil Kumaran, S ............................................. 10Seo, C ............................................................. 131Seo, J ....................................................... 13, 143Seo, S ................................................... 28, 84, 85Seo, Y ............................................................. 109Seol, J ............................................... 57, 106, 140Seong, B .................................................... 118, 143Sepehrband, P ...................................................... 35Serebryany, V ...................................................... 52Serizawa, A ................................................... 30, 79Serna, L ............................................................... 50Serna, S ............................................................... 11Serra, A ......................................................... 67, 87Serrano de Caro, M ................................... 107, 125Sesen, K ............................................................ 141Seshadri S.K. ....................................................... 31Sethna, J ................................................ 14, 68, 121Setyawan, A ......................................................... 74Sevik, C ............................................................... 15Sewell, T ........................................... 105, 123, 139Sha, G ......................................................... 70, 89Shackelford, J ................................................ 36, 84Shade, P ....................................................... 59, 138

Shah, J ................................................. 51, 93, 136Shah, M ............................................................... 12Shahandeh, S ....................................................... 12Shahbazian-Yassar, R .......................................... 20Shaily, B .............................................................. 29Shamloo, R ........................................................ 142Shan, Z ................. 20, 32, 40, 59, 77, 88, 142, 143Shang, J ....................................................... 80, 131Shang, S ............................................................ 132Shankar, M .................................................... 51, 70Shanmugam, J ..................................................... 15Shanmugasandaram, P ............................ 10, 12, 92Shao, S ............................................................... 26Shapovalov, V ..................................................... 39Sharma, S .................................................. 113, 133Sharon, J .............................................................. 40Sharp, L ............................................................... 49Shartal, K ............................................................ 62Shavrov, V ................................................... 10, 130Shaw, J ............................................................. 142Shaw, L ............................................................... 20Shayesteh, P ........................................................ 44Shayesteh-Zeraati, A ..................................... 19, 74Shechtman, D ...................................................... 62Shehata, M ........................................................ 116Sheikh-Ali, A................................................. 15, 67Shekhar, C ........................................................... 49Shekhar, R ......................................................... 132Shekhar, S ..................................................... 51, 70Shekher, S ........................................................... 90Shelyakov, A ....................................................... 10Shen, C ....................................................... 37, 139Shen, H ............................................................... 78Shen, J ............................................................... 94Shen, Q ............................................................. 143Shen, Y ............................................... 90, 119, 145Shen, Z ............................................................. 136Sheng, G .............................................................. 95Shenghai, Y ................................................. 12, 141Shepelev, D ......................................................... 99Sherburne, M ....................................................... 45Sherby, O ............................................................. 33Shet, S ......................................................... 19, 75Shevchenko, D .................................................... 61Shevchenko, S ..................................................... 32Shi, D ............................................................. 103Shi, F ............................................................... 40Shi, G ............................................................. 141Shi, J ............................................................... 10Shi, L ............................................................. 125Shi, Q ............................................................... 37Shi, R ............................................................... 41Shi, S ............................................................... 63Shi, W ................................................. 10, 16, 143Shi, Y ............................................. 14, 37, 84, 98Shi, Z ..................................... 10, 43, 55, 62, 126Shi-wen, L ........................................................... 72Shim, J ..................................................... 143, 144Shim, S ............................................................. 144Shimasaki, S ........................................................ 61Shimokawa, T ..................................................... 33Shin, B ..................................................... 141, 142Shin, C ............................................................. 134Shin, D ............................. 15, 32, 51, 61, 132, 144Shin, E ....................................................... 97, 118Shin, H ............................................................... 34Shin, J ................................................... 60, 71, 85Shin, K ......................................... 13, 61, 141, 144Shin, S ................................................. 21, 22, 138Shin, Y ............................................. 133, 141, 142Shinozuka, K ................................................. 14, 32Shirai, S ............................................................... 42


166

IndexShirazi, H ............................................................ 51Shirinov, T ......................................................... 142Shishegar, H ........................................................ 38Shitole, S ........................................................... 118Shivaputrappa, K ................................................. 85Shivendra .......................................................... 138Shiwen, B ........................................ 35, 91, 96, 126Shlachter, J ........................................................ 107Shoieb, S ........................................................... 113Shoji, T ............................................................. 144Sholl, D ............................................................... 62Shon, I ............................... 10, 141, 142, 143, 144Shon, S ............................................................. 141Shook, S ............................................................ 132Shoude, W ......................................................... 119Shridas, N ............................................................ 54Shu, Y ..................................................... 104, 116Shuigen, W .......................................................... 25Shukla, A ........................................................... 133Shukla, N........................................................... 132Shukralla, M ........................................................ 35Shuster, R ...................................................... 42, 95Shute, C ............................................................... 51Shuto, H ............................................................ 137Sickels, K ............................................................ 76Sidhu, M .............................................................. 36Sidhu, R............... 14, 27, 46, 65, 84, 102, 118, 135Siegel, N .............................................................. 56Siegenthaler, H .................................................... 96Sietsma, J ............................................................ 95Siewert, T ............................................................ 62Sigler, D .............................................................. 31Sik Lee, J ............................................................. 15Siljan, O .............................................................. 59Sillekens, W ............................... 13, 24, 43, 61, 62, ................................... 80, 81, 99, 116, 132Silva, A ............................................................... 10Silva, F ......................................................... 16, 71Silva, O ......................................................... 14, 77Sim, J ............................................................... 28Simakov, D ........................................................ 126Simko, S .............................................................. 62Simmons, J ............ 32, 50, 69, 75, 87, 88, 106, 123Simpson, M ......................................................... 60Singh, A ........................................... 30, 67, 81, 141Singh, C............................................................. 123Singh, D .............................................................. 90Singh, H .......................................... 57, 75, 88, 108Singh, J ............................................................... 33Singh, P ............................................... 29, 131, 140Singh, R..................... 11, 29, 39, 47, 49, 66, 70, 85Singh, S ....................................................... 75, 130Singh, V .................................................. 16, 34, 75Singhal, R .......................................................... 133Sinha, M ............................................................ 141Sinha, V ....................................................... 47, 103Sinnott, S ..................................................... 30, 120Sintay, S .............................................................. 87Siquieri, R ..................................................... 41, 78Sisneros, T ................................................... 64, 134Siu, S ............................................................. 131Sivaramakrishnan, S ........................................... 15Sizek, H ............................................................... 22Sket, F ............................................................... 27Skipper, C ............................................................ 77Skirde, S .............................................................. 36Skorpenske, H ..................................................... 27Skripnyuk, V ....................................................... 24Skrotzki, B .......................................................... 24Skrotzki, W ......................................................... 69Skszek, T ................................................... 132, 137Skybakmoen, E ............................................. 20, 59

Slade, S ......................................................... 43, 61Slagnes, S ............................................................ 59Slamovich, E ....................................................... 81Slifka, A............................................................... 62Sloutskin, E ......................................................... 22Sluiter, M ................................................ 12, 19, 60Slyn’ko, E ......................................................... 130Slyn’ko, V ......................................................... 130Smetana, J ........................................................... 14Smith, C .............................................. 36, 131, 143Smith, G ............................................................ 123Smith, P ............................................................... 71Smits, E ............................................................... 96Smugeresky, J ............................................. 25, 120Snead, M ............................................................. 17Sneyd, J ............................................................... 97Snyder, B ............................................................. 83Snyder, C ............................................................. 82So, C ....................................................... 17, 127So, Y ............................................................... 14Soares, F ...................................................... 92, 109Sob, M ....................................................... 50, 138Soboyejo, W ........................................................ 73Sofie, S ............................................................... 81Sofronis, P ................................................... 87, 122Sohal, M .............................................................. 56Sohn, H ....................................................... 23, 116Sohn, J ............................................................. 138Sohn, S ............................................................... 56Sohn, Y ................................. 33, 46, 116, 118, 135Sokolov, M .......................................................... 25Sokolowski, J ...................................................... 43Solak-Gok, O ...................................................... 23Solanki, K ........................................................... 24Solaris, S ........................................................... 139Solheim, A ........................................................... 59Somani, M ................................................... 51, 110Somekawa, H ...................................................... 81Somerday, B ........................................................ 87Somerman, M ................................................ 17, 73Somsen, C ........................................................... 95Son, H ............................................................. 113Sondhi, S ............................................................. 98Song, C ............................................................. 141Song, G ............................................................... 62Song, J ................................ 46, 65, 66, 87, 90, 99, ............................. 102, 119, 120, 134, 143Song, K ............................................................... 13Song, L ......................................................... 11, 34Song, N ............................................................. 141Song, Q ............................................................. 130Song, S ............................................................... 37Song, T ............................................................... 49Song, Y ......................................................... 39, 82Soni, P ............................................................... 92Sonnemann, G ..................................................... 68Sonntag, P ......................................................... 126Sopian, K............................................................. 16Sopu, D ............................................................... 56Sorensen, J ........................................................ 126Sorhuus, A ..................................................... 35, 36Soriano-Vargas, O ............................................. 143Sorlie, M ........................... 39, 58, 76, 96, 112, 129Sort, J ............................................................. 127Sosa, J ........................................... 11, 39, 50, 124Sossaman, T ........................................................ 66Soucy, G .............................................................. 39Souza, D ............................................................ 128Souza, J ............................................................. 111Söyler, A .................................................... 141, 144Spaepen, F ........................... 18, 22, 41, 60, 78, 115Spangenberger, J ....................................... 120, 137

Spanos, G ................................ 32, 72, 74, 123, 124Spathis, D .......................................................... 111Spatschek, R ........................................................ 58Spearot, D ... 26, 45, 64, 67, 83, 101, 117, 134, 136Specht, E ............................................................. 27Spolenak, R ................................................... 27, 82Spowart, J .......................................... 16, 17, 47, 69Sprague, A ........................................................... 38Sprenkle, V .................................................. 91, 133Squatrito, R ......................................................... 56Sreenivasan, R ................................................... 104Sreeranganathan, A ........................................... 108Srinivasan, B ....................................................... 95Srinivasan, K ....................................................... 12Srinivasan, M ...................................................... 45Srinivasan, R ..................................................... 128Srivastava, A ....................................................... 53Srivastava, C ....................................................... 71Srivatsa, S ........................................................... 98Srivilliputhur, S ............................... 11, 12, 95, 120Srolovitz, D ................................ 14, 31, 50, 64, 68, ............................... 87, 105, 122, 134, 138St-Georges, L ...................................................... 92Stach, E ............................................................. 107Stachurski, Z ..................................................... 118Stafford, S ......................................................... 135Stal, R ............................................................... 74Stampfli, J ........................................................... 96Stanek, C ............................................... 30, 86, 120Stanford, M ......................................................... 30Stanford, N .......................................................... 81Stauffer, D ........................................................... 11Stechel, E ............................................................ 56Steele, T ............................................................ 113Steen, I ............................................................. 128Stein, C ............................................................. 123Stein, J ............................................................. 138Steinbach, I ......................................................... 95Steinfeld, A .......................................................... 91Steingart, D ................................................. 99, 115Stem, M ............................................................. 129Stender, P ............................................................ 30Stephan, D ......................................................... 107Stephens, E .......................................................... 39Stephenson, C ..................................................... 76Stephenson, D ..................................................... 96Stephenson, G ..................................................... 46Stephenson, K ................................................... 107Stergar, E ................................................... 102, 118Steurer, W............................................................ 64Stevens, L .......................................................... 123Stevenson, A ...................................................... 134Stevenson, J....................................................... 100Stewart, C ............................................................ 97Stewart, J ..................................................... 97, 135StJohn, D ....................................................... 60, 78Stoica, A ........................................................ 27, 83Stoica, M ............................................................. 18Stolboushkina, O ............................................... 109Stoldt, C ........................................................ 34, 77Stollberg, D ........... 10, 16, 34, 53, 70, 90, 107, 125Stoller, R ............................................... 25, 67, 134Stone, D............................................................. 110Stone, H............................................................. 135Stoots, C .............................................................. 56Storm, R .............................................................. 39Stoudt, M........................................................... 137Stover, A .............................................................. 21Strachan, A ........................ 105, 117, 123, 134, 139Strader, J ...................................................... 67, 107Strasky, J ............................................................. 95Stravinskas, J..................................................... 140

167

IndexStreiffer, S ........................................................... 46Stroeve, P ............................................................ 71Strunz, P ............................................................ 134Stubbins, J ......................................................... 102Stukowski, A ....................................................... 26Stumphy, B .......................................................... 15Stupperich, E ....................................................... 93Sturm, D .............................................................. 70Su, C ..................................... 104, 119, 127, 136Su, L ............................................................... 15Su, P ..................................................... 135, 136Su, S ............................................................... 58Su, Z ............................................................... 35Suarez, C ........................... 34, 54, 71, 91, 108, 126Suárez, O ........................................................... 130Subbarayan, G ............................................. 65, 118Subbarayan, S ..................................................... 15Subramanian, K ................................. 27, 28, 46, 84Subramanian, P ................................................... 70Subramanian, R ................................................. 107Subramanian, V ................................................. 100Subramanya Sarma, V ......................................... 70Sudibjo, A .......................................................... 136Suganuma, K ................................................. 28, 46Sugar, J ............................................................. 120Sugawara, M ....................................................... 39Sugui, T ............................................................... 57Suh, Y ............................................................. 108Suk, M ............................................................. 140Sulaiman, D ....................................................... 112Sule, P ............................................................. 122Sulger, P ............................................................ 112Sulmont, B ........................................................ 109Summers, A ....................................................... 127Summers, C ....................................................... 111Sun, C ..................................................... 119, 139Sun, G ............................................................. 135Sun, H ............................................... 67, 127, 136Sun, J ............................................................... 32Sun, L ....................................... 16, 119, 122, 130Sun, N ....................................................... 23, 108Sun, P ............................................................... 72Sun, Q ............................................................. 143Sun, X ................................... 15, 61, 63, 132, 145Sun, Y ................................................... 31, 58, 76Sun, Z ................................................. 25, 99, 137Sundara Raman S, G ........................................... 31Sundaram, P ........................................................ 11Sundararajan G .................................................... 30Sundman, B ......................................................... 95Sung, H ............................................................... 21Sung, S ....................................................... 17, 144Suo, B ............................................................... 16Suominen Fuller, M .......................................... 102Suparadist, M ...................................................... 94Suri, J ............................................................... 69Suriñach, S ........................................................ 127Suryanarayana, C ................................................ 33Susila, P ............................................................... 70Suslov, S ............................................................ 107Suss, A ......................................................... 54, 71Suter, R ....................................................... 86, 101Sutou, Y ......................................................... 57, 62Sutton, A .............. 14, 31, 50, 68, 87, 105, 122, 138Sutton, M............................................................. 64Suwanpinij, P ...................................................... 66Suwas, S ............................................................ 138Suzuki, A ............................................................. 97Swaminarayan, S ............................................... 122Swaminathan, S ................................................... 89Swamy, N ............................................................ 11Swamy, R ............................................................ 59

Swaroop, S .......................................................... 97Swarupini, G ....................................................... 92Sweatman, K ..................................................... 136Swenson, H ......................................................... 21Switzner, N .......................................................... 98Swoboda, B ....................................................... 122Syarif, Y ............................................................ 112Sykes, B .............................................................. 65Sykes, E............................................................... 97Syn, C ............................................................... 33Synkov, S ............................................................ 69Szczepanski, C .................................... 77, 120, 137Szlufarska, I .............................................. 134, 140Szpunar, J .......................................................... 114

T

Tabachnikova, E .................................................. 51Tabereaux, A................................................ 54, 129Tada, S ............................................................. 131Tahirlu, H .......................................................... 142Tai, F ............................................................. 103Takagi, M ............................................................ 29Takahashi, A ...................................................... 122Takahashi, T ...................................................... 144Takahashi, Y ...................................................... 102Takamatsu, Y ....................................................... 14Takano, C ............................................................ 79Takats, V ............................................................. 67Takei, R ............................................................... 61Takekiyo, T ....................................................... 117Takemoto, T ...................................................... 135Takenaka, T ......................................................... 39Takeuchi, S ........................................................ 122Taktak, B ............................................................. 17Taleff, E ............................................................. 114Talling, R ....................................................... 27, 78Tamerler, C .................................... 17, 73, 110, 127Tamirisakandala, S .............................................. 96Tamura, N...................................................... 26, 65Tamura, T ............................................................ 73Tan, C ............................................................. 144Tan, S ......................................................... 66, 74Tan, W ............................................................. 117Tanaka, F ........................................................... 137Tanaka, K .......................................................... 122Tanaka, M............................................................ 33Tanaka, N .......................................................... 112Tancret, F ...................................................... 73, 78Tang, G ............................................................... 90Tang, L ............................................................... 57Tang, S ............................................................... 30Tang, T ............................................................... 80Tang, W ....................................................... 65, 104Tangstad, M ......................................................... 30Taniguchi, S ........................................................ 61Tannenbaum, J .............................................. 38, 57Tao, N ............................................................... 52Tao, X ............................................................... 16Tarafder, M .................................. 38, 110, 121, 140Tarafder, S ................................................... 38, 121Tarcy, G ............................................................. 129Tardio, J ............................................................. 126Tariq, F ............................................................. 106Tasaki, K ........................................................... 100Tassa, O ............................................................... 59Taupin, V ............................................................. 68Tavangarian, F ..................................................... 90Tavazza, F ........................................................... 45Taylor, J ............................................................. 111Taylor, M ....................................................... 54, 97Taylor, R .............................................................. 23

Taylor, S .............................................................. 97Tayon, W ............................................................. 12Tazibt, A .............................................................. 29Teare, A ............................................................... 92Tedenac, J ............................................................ 66Tegze, G .............................................................. 41Teixeira, A ......................................................... 129Telesman, J ........................................................ 114Templeton, J ...................................................... 100Teng, Z ......................................................... 12, 65Tenorio, J ........................................................... 120Terai, T ............................................................... 65TerBush, J ......................................................... 132ter Weer, P ........................................................... 91Tessier, J .................................................... 126, 129Tevar, A ............................................................. 133Tewari, A ............................................................. 57Thackray, R ......................................................... 18Thadhani, N ......................................................... 16Thanh, P ........................................................ 75, 97Thein-Han, W ........................................ 73, 93, 110Thess, A ............................................................... 63Thevoz, P ............................................................ 42Thirathipviwat, P ................................................. 94Thirumalai, N ........................................ 15, 85, 123Thirunavukkarasu, S ........................................... 36Thiyagarajan, P ................................................... 65Thomas, B ............. 13, 24, 42, 61, 80, 98, 115, 131Thomas, D ......................................................... 108Thomas, H ......................................................... 128Thomas, J .................................................... 89, 115Thomas, M .......................................................... 22Thomas, S ......................................................... 134Thomas, W .......................................................... 40Thompson, C ....................................... 46, 128, 132Thompson, D..................................................... 139Thompson, G........................... 48, 71, 84, 106, 112Thomsen, D ................................................. 12, 118Thomson, C ......................................................... 46Thonstad, J .......................................................... 92Thornton, D ......................................................... 50Thornton, K ..................................... 50, 69, 81, 117Thostenson, E .................................................... 103Threrujirapapong, T ............................................ 71Tian, J ..................................................... 127, 144Tian, S ............................................................... 44Tichy, G ......................................................... 68, 69Tick-Hon, Y....................................................... 107Tiejun, C .............................................................. 23Tierney, H ............................................................ 97Tieu, K ............................................................... 15Tikare, V.............................................................. 38Tikasz, L .............................................................. 92Tiley, J .......................... 13, 26, 27, 30, 40, 46, 64, ....................... 83, 101, 117, 128, 134, 141Timmel, K ........................................................... 24Timoney, C .......................................................... 16Timur, S ....................................................... 40, 141Tin’ghaev, P ........................................................ 72Tin, S ............................................................... 98Tischler, J ...................................... 27, 46, 101, 106Tkacheva, O ........................................................ 72Todaka, Y ............................................................ 89Todaro, I .............................................................. 56Todd, B ............................................................... 83Todd, I ............................................................... 18Todd, P ............................................................. 116Tokar, V ............................................................... 79Toledo Filho, R ................................................... 16Toloczko, M ........................................ 25, 135, 136Toloui, M ............................................................. 38Tomar, V ................................ 38, 73, 101, 105, 120


168

IndexTombolato, L ....................................................... 55Tome, C ........................... 38, 74, 83, 122, 135, 137Tomesani, L ................................................... 54, 56Tomforde, C ...................................................... 142Tomorr, H .......................................................... 115Tomota, Y ............................................................ 83Tomus, D ........................................................... 134Tong, C ............................................................... 47Tong, P ............................................................... 18Tong, T ............................................................... 94Tonks, D .................................................... 138, 140Tonks, M ....................................... 63, 88, 121, 139Tönnies, D ........................................................... 37Toops, T............................................................. 117Topping, T ............... 15, 51, 56, 69, 73, 88, 89, 107Torabi, S ........................................................ 53, 75Torbet, C ........................................................... 134Toroian, D ........................................................... 55Torres, K............................................................ 112Tortorelli, D ....................................................... 121Tortorelli, P ....................................................... 117Torvanger, K ....................................................... 74Tosas, A ............................................................. 123Toth, G ............................................................... 41Toth, L ................................................. 52, 64, 138Tóth, L ............................................................... 32Tran, D ..................................................... 103, 136Tran, K ............................................................. 109Tran, T ................................................... 31, 36, 75Trembly, J ............................................................ 62Trenkler, J............................................................ 64Trifonov, V .......................................................... 54Trinkle, D ............................. 12, 19, 38, 58, 62, 67, ................... 68, 75, 95, 121, 122, 123, 137Tripathi, S .......................................................... 115Tripp, D ......................................................... 42, 95Trivedi, R ............................................................ 60Troderman, G .................................................... 128Trong, S ............................................................... 11Trovant, M ........................................................ 111Truan-Sheng, L.................................................. 140Trujillo, C ............................................ 87, 131, 142Trunov, M ............................................................ 67Tsai, C ............................................................... 46Tsai, M ........................................... 28, 74, 84, 119Tsai, T ............................................................... 37Tsakiropoulos, P ............................................ 18, 66Tsao, C ............................................................... 73Tschöpe, K .......................................................... 59Tseng, C ...................................................... 14, 118Tseng, H ............................................................ 136Tsirlina, G ......................................................... 126Tsiros, J ............................................................. 111Tsuji, N ..... 15, 32, 33, 51, 69, 70, 88, 89, 106, 124Tsunekane, M ...................................................... 97Tsurekawa, S ..................................................... 138Tsutsumi, H ......................................................... 95Tu, G ............................................................... 10Tu, K ..................................... 27, 28, 48, 65, 136Tu, W ............................................................... 98Tucker, G ..................................................... 68, 134Tucker, J ................................................ 65, 82, 122Tucker, M .......................................................... 140Tucker, T ........................................................... 114Tulk, E ............................................................... 27Tumey, S ........................................................... 107Tung, H ............................................................. 102Tupper, C ........................................................... 134Turbini, L ............ 14, 27, 46, 65, 84, 102, 118, 135Turchi, P .............................................................. 15Turk, B ............................................................... 62Turner, A............................................................ 127

Turner, D ............................................................. 88Turner, J ................................................ 19, 75, 117Turski, M ............................................................. 81Tutuncu, G ........................................................ 117

U

Ubertalli, G ......................................................... 21Uberuaga, B .......................... 30, 85, 120, 122, 139Uchic, M ............................... 59, 86, 106, 123, 138Ucuncuoglu, S ........................................... 111, 116Uda, T ....................................................... 12, 112Uddin, S .............................................................. 12Ude, A ............................................................... 16Udofot, B....................................................... 10, 71Udovic, T ............................................................ 37Udyansky, A ........................................................ 41Ueda, M ............................................................... 80Ueshima, M ....................................................... 102Uggowitzer, P ................................................ 17, 73Ugle, R ............................................................... 25Uglov, V .............................................................. 67Uk, H ............................................................... 67Ulfig, R ............................................................. 102Ulrich, G ............................................................. 29Um, H ............................................................... 28Umeda, J ....................................................... 61, 71Umeda, T ............................................................. 94Umemoto, M ....................................................... 89Umezawa, O ...................................................... 145Ungar, T .......................................... 32, 69, 83, 135Unlu, N ....................................................... 71, 142Unni, K ............................................................. 129Uno, K ............................................................... 23Unocic, R ........................................ 68, 78, 97, 139Unuvar, C ............................................................ 47Upadhyaya, A ...................................................... 29Upmanyu, M ....................................................... 86Urata, N ............................................................... 92Urban, I ............................................................... 24Urban, M ........................................................... 131Urgen, M ............................................... 40, 57, 111Usami, N ............................................................. 29Usov, I ............................................................... 86Ustundag, E ......................................... 27, 117, 135Uyar, F ......................................................... 11, 69Uysal, C............................................................. 141Uzel, S ............................................................... 93

V

Vai, A ............................................................. 115Vaidyanathan, R ................................................ 114Vainik, R ............................................................. 56Valdez, S ............................................. 96, 142, 143Valentina, T ....................................................... 143Valenzuela, J ....................................................... 23Valenzuela-Díaz, F .............................................. 10Valette, S ............................................................. 64Valiakhmetov, O ................................................ 124Valiev, R .............. 15, 32, 33, 69, 89, 106, 107, 135Valone, S ............................................................. 67Van Acker, K ....................................................... 86Van Aken, D .................................................. 25, 44Vanasse, J .......................................................... 111Vanasupa, L ....................................................... 121Van Buuren, T ................................................... 107van den Bergh, M ................................................ 33Van der Biest, O .................................................. 25Van der Giessen, E ........................................ 45, 64Van der Ven, A ....................... 19, 60, 100, 115, 122van der Zwaag, S ......................................... 63, 130

van de Walle, A ..................................... 41, 60, 121Van Gerven, T ................................................... 104Vangolu, Y ........................................................... 52Vanherpe, L ......................................................... 98Van Petegem, S ................................... 26, 101, 134Vansickle, S ......................................................... 73Van Swygenhoven, H .......................... 26, 101, 134VanVechten, T ..................................................... 16Van Vliet, K................................................... 30, 68van Zyl, D ......................................................... 121Varlioglu, M ...................................................... 117Varma, S ........................................................ 66, 82Varnik, F .............................................................. 22Varyukhin, V ....................................................... 69Vasconcelos, P ........................................... 112, 129Vassileva, V ....................................................... 143Vassiliev, S ........................................................ 126Vaughan, G .......................................................... 18Vaynman, S ......................................................... 66Väyrynen, P ......................................................... 24Vecchio, K ........................................................... 55Velev, K ............................................................. 143Vellemans, P ...................................................... 109Venancio, L ....................................................... 111Vendette, H .................................................... 35, 96Venkatasurya, P ................................................... 51Venkatesh, M ..................................................... 130Venkatesh, T .................................................. 71, 90Venkatesh, V ....................................................... 95Ventelon, L .................................................... 14, 50Vera, M ......................................................... 23, 49Verbrugge, M ...................................................... 31Verlinden, B ........................................................ 88Verma, B ............................................................. 77Verma, R ........................................................... 116Vernon, C .......................................................... 126Verpoest, I ........................................................... 86Vetrano, J ........................................................... 112Vetterick, G ....................................................... 114Victoria, M .......................................................... 63Vidu, R ............................................................... 71Vieira, C .................................................... 120, 128Villafuerte, J ...................................................... 114Villar, E ............................................................. 137Villarreal, T ....................................................... 141Vinogradov, A ..................................................... 37Viswanathan, G ................................... 30, 128, 141Viswanathan, N ................................................. 111Viswanathan, S .................................................... 99Viswanathan, V ................................................. 133Vitek, V ............................................................... 31Viumdal, H ........................................................ 113Vivek, A ............................................................. 130Vleugels, J ........................................................... 25Vo, N ......................................................... 15, 26Vogel, ............................................................... 66Vogel, S ....................................................... 47, 135Vogt, H ............................................................... 92Vogt, R ..................................... 15, 51, 88, 89, 106Voit, W ............................................................. 137Volkert, C ...................................................... 20, 37Volkova, O .......................................................... 80Voller, V .............................................................. 61Volz, H ....................................................... 21, 114von Alfthan, S ................................................... 105Von Dreele, R ...................................................... 83von Pezold, J ......................................... 14, 41, 122Voorhees, P .............................................. 12, 69, 98Vorontsov, V ...................................................... 139Voskoboinikov, R .............................................. 139Voter, A ................................... 50, 67, 85, 122, 139Voyer, R ....................................................... 74, 142

169

IndexVoyles, P ...................................................... 73, 110Vratna, J .............................................................. 15Vsianska, M ...................................................... 138Vutova, K .......................................................... 143

W

Wachs, D ....................................................... 25, 26Wachsman, E ....................................................... 81Wäger, P .............................................................. 68Wagner, C .......................................................... 109Wagner, D ......................................................... 132Wagner, G ............................................. 35, 37, 132Wagner, L ............................................................ 95Wagner, M ........................................................... 11Wagner, P ............................................................ 95Wagner, R .......................................................... 139Wagoner Johnson, A ...................................... 34, 36Waheed, A ........................................................... 91Waheed, M ........................................................ 140Wain, N ............................................................... 59Walker, M ............................................................ 72Wallis, R ............................................................ 114Wallwark, K ...................................................... 134Waly, M ............................................................. 129Wan, A ............................................................... 79Wang, B ............................................................. 104Wang, C ....................... 28, 47, 65, 84, 99, 141, 143Wang, D .............................................. 91, 115, 133Wang, F ............................................................... 65Wang, G ............................... 18, 37, 43, 44, 55, 65, ........................... 73, 93, 94, 110, 127, 143Wang, H ........ 16, 19, 46, 67, 75, 76, 111, 117, 137Wang, J .................... 10, 14, 20, 26, 36, 38, 45, 46, ......... 51, 56, 70, 82, 84, 99, 118, 135, 144Wang, K .................................. 14, 47, 65, 100, 132Wang, L ................................ 10, 15, 26, 27, 38, 53, ................................. 76, 97, 113, 115, 143Wang, M ........................................................ 27, 69Wang, P ......................................................... 40, 43Wang, Q .......................... 54, 55, 81, 104, 119, 136Wang, R ............................................................... 73Wang, S ................................... 24, 30, 80, 135, 145Wang, T ....................................................... 79, 144Wang, W .................... 11, 19, 39, 88, 134, 142, 143Wang, X ...... 18, 27, 37, 83, 94, 117, 126, 135, 142Wang, Y .......................... 13, 18, 22, 26, 27, 30, 41,

.................... 46, 53, 61, 64, 65, 68, 70, 76, ................ 80, 83, 101, 103, 104, 106, 110, ............. 116, 117, 132, 134, 135, 139, 145Wang, Z ................. 10, 35, 39, 43, 55, 67, 123, 126Wanming, L ......................................................... 21Ward, D ............................................................. 142Ward, M .............................................................. 59Ware, T ............................................................. 137Warner, D ............................................ 45, 117, 123Warren, A .......................................................... 116Warren, J ....................................................... 22, 58Warwick, J ........................................................... 78Wasbø, S............................................................ 109Wasekar, N .......................................................... 30Watanabe, M ..................................................... 137Watanabe, R ...................................................... 116Watanabe, T ....................................................... 138Watanabe, Y ...................................................... 102Watkins, T ........................................................... 27Watkowski, J ....................................................... 14Watson, K ............................................................ 36Way, J ............................................................... 62Wayne, L ........................................................... 142Weaver, D ............................................................ 98Webb, E ............... 26, 45, 58, 64, 83, 101, 117, 134

Webb, J ............................................................. 108Weber, T .............................................................. 64Weber, W ........................................................... 125Webster, M .......................................................... 30Webster, V ......................................................... 142Weckman, D ........................................................ 42Wedde, G ....................................................... 35, 36Weddeling, C ..................................................... 114Wee, D ............................................................... 63Weertman, J ......................................................... 51Wegst, U .............................................................. 55Wei, C ............................................................... 21Wei, D ......................................................... 78, 98Wei, H ............................................................... 84Wei, K ............................................................. 108Wei, L ....................................................... 12, 141Wei, Q ................................................... 51, 67, 88Wei, S ..................................................... 103, 119Wei, Y ......................................................... 20, 26Weihmuller, L ...................................................... 40Weihs, T .............................................................. 21Weil, K ............. 24, 44, 62, 81, 100, 116, 117, 133Weil, S ............................................. 100, 112, 116Weiland, J ............................................................ 93Weiler, J ............................................................... 99Weimer, A ............................................................ 91Weinberger, C ...................................................... 26Weinhardt, L ...................................................... 125Weiss, B .............................................................. 33Weissmüller, J ..................................................... 40Weitz, D .............................................................. 22Weiwei, D............................................................ 11Weiwei, T .......................................................... 108Wejrzanowski, T ................................................. 12Welberry, R ............................................... 117, 118Welch, B .............................................................. 36Welcing, A ........................................................... 12Weldon, D ......................................................... 135Welk, B ............................................................... 12Wells, M .................................................. 41, 42, 72Wen, H ............................................................. 107Wen, W ......................................................... 10, 11Wen, X ......................................................... 35, 54Wen, Y ......................................................... 55, 75Wen-cheng, L .................................................... 126Wenbing, Z ........................................................ 141Wenzhong, C ..................................................... 108Werley, T ........................................................... 140Wert, D ............................................................. 140West, J ............................................................... 16West, M ............................................................. 102Westerheide, J ................................................... 131Wette, P ......................................................... 22, 60Wheeler, B .......................................................... 77Wheeler, D .......................................................... 22Wheeler, K ........................................ 64, 82, 86, 97Wheeler, R .................................................... 47, 59Whipple, D .......................................................... 77Whitacre, J ................ 24, 44, 62, 81, 100, 116, 133White, B .............................................................. 16White, C ...................................................... 91, 109White, P ............................................................... 49Whiteley, P .................................................. 74, 111Whitis, D ....................... 12, 22, 40, 59, 78, 98, 114Whittington, W .................................................. 140Wicker, R ...................................................... 53, 60Widrevitz, D ...................................................... 131Widyastuti ......................................................... 108Wilde, G ................................................ 60, 69, 127Wildfong, P ....................................................... 123Wilkerson, J ...................................................... 135Wilkerson, L ...................................................... 131

Wilkins, J .......................................................... 122Wilkinson, A .................................................. 78, 92Wilkinson, C ............................................. 119, 124Wilkinson, D ......................................... 11, 50, 141Wilks, G ...................................................... 37, 110Wilks, T ............................................................... 81Willaime, F .................................................... 14, 50Willard, M ................................. 106, 107, 125, 129Willey, T ............................................................ 107Williams, F .......................................................... 34Williams, J ................................ 12, 33, 47, 78, 123Williams, R ................................... 11, 34, 124, 142Williamson, M .................................................... 82Williamson, S ...................................................... 31Willis, J ............................................................. 141Wilson, B .................................................... 17, 110Wilson, I .............................................................. 16Wilson, J .............................................................. 81Wilson, O .................................................... 36, 110Wilson, S ........................................................... 139Wind, S ............................................................... 35Windl, W ............................................... 37, 64, 110Wingate, C .......................................................... 71Wingate, N ........................................................ 144Winiarski, B ...................................................... 127Winning, M ......................................................... 69Winterrose, M ..................................................... 95Winther, G ......................................................... 138Wirth, B ....................................... 63, 108, 135, 144Wise, S ............................................................... 53Withers, J .......................................... 20, 39, 58, 98Withers, P .................................................... 78, 127Withey, E ..................................................... 59, 122Withey, P ............................................................. 61Witkin, D ............................................................. 84Witusiewicz, V .................................................... 41Wobker, H ......................................................... 111Wolf, A ............................................................... 54Wolf, D ........................................... 63, 75, 88, 139Wolfe, T ....................................................... 29, 120Wolk, J ............................................................... 74Woll, A ............................................................... 46Wollants, P .......................................................... 98Wollmershauser, J ....................................... 64, 118Wolverton, C ......... 19, 22, 41, 60, 79, 98, 115, 132Wombles, R ......................................................... 76Wong, C .............................................................. 72Wong, W ..................................................... 29, 103Woo, J ............................................................. 142Woo, K ....................... 10, 100, 117, 141, 142, 143Woo, W ....................................................... 27, 143Wood, D ............................................................ 117Wood, J ............................................................... 99Woodfield, A........................................................ 58Woodward, C ................................... 40, 41, 45, 68, ............................... 75, 106, 122, 123, 138Woodward, S ..................................................... 114Wright, N ............................................................ 28Wright, P ..................................................... 99, 115Wright, S ........................... 32, 50, 69, 87, 106, 123Wright, W ............................................................ 37Writh, B ............................................................. 143Wrobel, J ............................................................. 43Wu, A ................................................. 28, 85, 136Wu, C ............................................... 66, 110, 145Wu, D ......................................................... 22, 75Wu, E ....................................................... 53, 135Wu, F ............................................................. 127Wu, G ......................................................... 47, 80Wu, H ................................................... 12, 19, 21Wu, J ............................................................. 100Wu, K ......................................................... 35, 98


170

IndexWu, L ......................................................... 39, 82Wu, M ......................................................... 66, 74Wu, P ............................................................... 14Wu, S ............................................................... 54Wu, W ........................... 47, 48, 84, 119, 136, 143Wu, X .......................... 11, 12, 21, 32, 51, 59, 60, ................... 76, 89, 91, 125, 131, 139, 143Wu, Y ......................................... 24, 71, 104, 118Wu, Z ............................................................... 49Wunderlich, R ................................................... 127Wurster, S ............................................................ 29Wuyang, C ........................................................ 131Wynn, A ............................................................. 113

X

Xi, Z ............................................................. 130Xia, G ............................................... 91, 100, 133Xia, K ................................................. 76, 89, 124Xia, Q ............................................................. 143Xia, W ....................................................... 23, 144Xianghua, L ......................................................... 57Xiao, B ............................................................... 44Xiao, C ............................................................... 66Xiao, H ............................................................. 125Xiao, J ....................................................... 61, 133Xiao, S ............................................................. 144Xiao, Z ......................................................... 76, 86Xiao-jun, L .................................................... 59, 72Xiaobing, Y ....................................................... 109Xiaodan, L ........................................................... 10Xiaodong, Y ........................................................ 54Xiaojun, L ..................................................... 39, 92Xiaoming, Z ...................................................... 108Xiaoni, S ....................................................... 68, 86Xiaowu, L ............................................................ 55Xie, B ............................................................... 61Xie, C ............................................................... 61Xie, G ................................................. 37, 55, 127Xie, H ............................................... 76, 103, 124Xie, M ............................................................... 98Xie, S ....................................................... 51, 113Xie, W ............................................................... 84Xifeng, C ............................................................. 92Xin, C ............................................................. 119Xin, H ......................................................... 23, 82Xing, D ............................................................... 56Xing, W ............................................................. 130Xing, Y ............................................................. 136Xinyan, Y ............................................................ 19Xiong, J ............................................................... 34Xiong, S ...................................................... 99, 132Xiong, Y ................................................ 25, 85, 120Xiquan, Q ...................................................... 72, 92Xu, B ......................................................... 11, 71Xu, C ............................................................... 81Xu, D ....................................................... 65, 108Xu, G ................................................. 14, 28, 103Xu, H ......................................................... 76, 84Xu, J ............................................................... 29Xu, L ....................................................... 65, 114Xu, N ............................................................. 101Xu, Q ....................................................... 40, 130Xu, R ............................................................... 64Xu, T ..................................................... 125, 138Xu, W ......................................... 76, 89, 126, 133Xu, X ............................................................... 80Xu, Y ............................................. 10, 11, 63, 89Xu, Z ............................................................... 62Xue, J ..................... 39, 40, 59, 63, 72, 76, 82, 91Xue, X ......................................................... 16, 34Xue, Y ............................................. 130, 137, 141

Xuechong, R ..................................................... 131Xuemei, W .......................................................... 23Xueyi, G .............................................. 87, 136, 141

Y

Yablinsky, C ........................................................ 78Yadav, A ............................................................ 144Yakar, S ............................................................. 141Yakobson, B .............................................. 103, 122Yakushev, R......................................................... 53Yamaji, K .......................................................... 100Yamaji, Y ........................................................... 145Yamamoto, K ...................................................... 15Yamamoto, M .................................................... 142Yamamoto, O ...................................................... 53Yamamoto, T ....................................................... 45Yamamoto, Y ................................................. 44, 58Yamanaka, K ....................................................... 89Yamasaki, T ......................................................... 73Yamauchi, H ...................................................... 115Yamauchi, K ...................................................... 102Yan, D ....................................................... 21, 114Yan, H ............................................................... 39Yan, K ............................................................. 102Yan, L ......................................................... 47, 91Yan, M ............................................................... 76Yan, R ............................................................. 113Yan, W ..................................................... 142, 143Yan, X ............................................................. 138Yan, Y ................................................... 11, 19, 75Yan-qing, L.................................................... 59, 72Yang, B ............................................................. 117Yang, C ........................................... 10, 47, 84, 100Yang, D ..................................................... 131, 138Yang, F ................................. 14, 36, 43, 57, 84, 93Yang, G ..................................................... 100, 133Yang, H ............................................................... 89Yang, J ............................................................... 72Yang, K ....................................... 99, 103, 142, 143Yang, L ............................................................. 144Yang, M ............................................................. 141Yang, Q ............................................................. 130Yang, R ............................................................... 18Yang, S ................................................. 43, 65, 120Yang, T ............................................................... 14Yang, W ......................................................... 26, 80Yang, Y ...................................... 12, 15, 23, 26, 35, ..................... 37, 40, 74, 97, 135, 136, 140Yang, Z ................................ 24, 39, 44, 62, 81, 91, ............................ 100, 104, 116, 120, 133Yanjing, S .......................................................... 131Yanjun, W............................................................ 19Yankov, R .......................................................... 113Yanli, J ............................................................... 72Yanqing, L ............................................... 39, 72, 92Yanyan, B ............................................................ 25Yao, B ....................................................... 33, 118Yao, C ............................................................... 95Yao, G ............................... 10, 53, 62, 71, 76, 130Yao, K ............................................................... 73Yao, W ............................................................... 85Yaowu, W ...................................................... 72, 92Yaoyu, W ........................................................... 129Yap, Y ............................................................... 20Yasi, J ..................................................... 122, 123Yavari, A .................................................. 18, 37, 73Yazdanmehr, M ................................................. 144Yazici, E ............................................................ 143Yazici, H .................................................... 110, 127Yazzie, K ............................................................. 47Ye, B ............................................................. 112

Ye, J ................................................... 59, 67, 74Ye, Y ............................................................. 131Yeager, J .............................................................. 59Yeh, J ............................................................... 74Yejju, H ............................................................. 105Yen, Y ..................................... 28, 47, 65, 84, 142Yexiang, L ........................................................... 39Yi, D ......................................................... 10, 72Yi, F ............................................................... 73Yi, J ............................................................... 69Yi, S ....................................... 15, 100, 131, 132Yim, T ............................................................... 28Yin, D ............................................................... 99Yin, H ............................................................... 63Yin, J ............................................................... 35Yin, L ............................................................... 63Yin, W ............................................................... 51Yin, Z ............................................................... 35Ying, A ............................................................... 83Ying, Y ............................................................. 136Yingfu, T ..................................................... 72, 129Yip, S ............................................................... 68Yodyingyong, S ................................................. 104Yokokawa, H ..................................................... 100Yokoyama, Y ..................... 18, 73, 93, 94, 110, 127Yoneda, H ............................................................ 95Yongliang, m ............................................... 96, 113Yoo, B ................................................. 37, 61, 144Yoo, J ......................................................... 13, 15Yoo, K ....................................................... 13, 115Yoo, M ..................................................... 100, 142Yoo, S ............................................... 46, 141, 142Yook, W .............................................................. 56Yoon, D ............................................................... 82Yoon, E ............................................................... 15Yoon, H ....................................................... 94, 145Yoon, J ......................................... 10, 28, 131, 143Yoon, K ............................................................. 103Yoon, S ... 15, 88, 94, 140, 141, 142, 143, 144, 145Yoshida, Y ......................................................... 142Yoshihara, T ...................................................... 122Yoshimura, Y ..................................................... 117Yotam, H ............................................................. 85You, T ............................................................... 46You, Y ............................................................. 117Young, D ............................................................. 44Young, G ....................................................... 45, 82Young, M............................................................. 71Yousef-Sani, M ................................................... 19Yousefiani, A ....................................................... 70Youssef, K ........................................................... 51Yu, A ......................................................... 65, 99Yu, C ............................................... 85, 119, 135Yu, H ................................................. 24, 81, 132Yu, J ................................. 43, 78, 119, 125, 137Yu, K ............................................................... 90Yu, Q ............................................................... 32Yu, X ............................................................... 48Yu, Y ............................................................. 141Yuan, B ............................................................. 128Yuan, H ....................................................... 40, 143Yuan, L ............................................................... 79Yuan, Q ............................................................. 136Yuan, R ............................................................... 87Yuan, W ..................................... 13, 33, 77, 82, 135Yucel, O ......................................... 25, 82, 116, 144Yuchun, Z .................................................... 10, 140Yue, A ............................................................... 95Yue, M ............................................................. 104Yue, S ................................. 29, 59, 100, 114, 116Yue-yuan, L ......................................................... 82Yueying, W .......................................................... 67

171

IndexYuezhong, D ........................................................ 11Yujie, X ............................................................... 92Yukawa, T ......................................................... 137Yumaguzin, Y ...................................................... 16Yun, J ............................................................. 124Yun, S ............................................................. 141Yun-long, L ......................................................... 72Yunnen, C .......................................................... 104Yurko, J ............................................................. 115

Z

Zacate, M ............................................................ 95Zacherl, D ..................................................... 42, 77Zaefferer, S .................................................. 47, 100Zahrah, T ....................................................... 42, 90Zaikov, Y ............................................................. 72Zainuri, M ......................................................... 108Zaky Farahat, A ................................................... 66Zander, D ................................................ 49, 62, 80Zarif, M ............................................................... 60Zavaglia, C .......................................................... 94Zberg, B .............................................................. 73Zbib, H ......................................................... 63, 90Zbib, M ............................................................... 30Zeches, R ............................................................. 95Zehetbauer, M ................................. 33, 83, 89, 124Zeifert, B ........................................................... 104Zelger, C .............................................................. 17Zelicourt, M ........................................................ 54Zemanova, A ....................................................... 85Zen, H ............................................................... 29Zeng, J ............................................................. 108Zeng, K ....................................... 14, 28, 47, 65, 84Zeng, P ............................................................... 12Zeng, Q ............................................................... 54Zeng, T ............................................................... 76Zeng, W ............................................................. 143Zeng, X ........................................... 24, 62, 80, 100Zeytuncu, B ....................................................... 144Zhai, J ............................................................... 34Zhai, Q ............................................... 11, 141, 143Zhai, T ................... 10, 17, 29, 35, 54, 72, 91, 109Zhan, C ............................................................... 43Zhan, D ............................................... 78, 140, 141Zhan, Y ......................................................... 20, 53Zhang, B ...................................................... 42, 113Zhang, D ................................... 14, 51, 52, 58, 119Zhang, F .............................................................. 35Zhang, G ............................................................. 10Zhang, H ................................. 10, 11, 62, 138, 140Zhang, J ...................................... 11, 25, 31, 44, 53, ............................. 73, 76, 77, 95, 133, 142Zhang, K ............................................. 60, 113, 144Zhang, L ................... 12, 13, 24, 42, 56, 61, 80, 98, ..... 115, 116, 119, 120, 127, 131, 137, 143Zhang, M ............................................................. 30Zhang, N ............................................................. 84Zhang, P .............................................................. 80Zhang, Q ................................................... 104, 133Zhang, R ...................................................... 28, 132Zhang, S .............................................. 81, 101, 138Zhang, T ........ 11, 16, 18, 40, 91, 94, 127, 140, 141Zhang, W ................................. 27, 29, 56, 140, 142Zhang, X ............................... 11, 20, 40, 53, 70, 85Zhang, Y ..................................... 10, 23, 34, 37, 51, ......................... 56, 61, 64, 72, 88, 89, 125Zhang, Z ................... 15, 16, 19, 51, 53, 56, 66, 76, ........... 85, 88, 89, 106, 127, 128, 131, 142Zhao, F ............................................................... 59Zhao, H ............................................................. 108Zhao, J ............................................................... 19

Zhao, L ............................................................... 63Zhao, M ............................................................... 14Zhao, X ............................................................... 15Zhao, Y ................................ 10, 15, 16, 32, 33, 34, .................... 51, 53, 69, 70, 71, 72, 85, 88, ........... 89, 90, 94, 106, 107, 108, 124, 125Zhao, Z ................................................... 44, 81, 94Zhaobo, T .................................................... 12, 141Zhen, Z ............................................................... 99Zheng, B .............................................. 73, 120, 125Zheng, D ............................................................. 11Zheng, H ............................................................. 20Zheng, L .............................................................. 83Zheng, S ............................................................ 145Zheng, W ............................................................. 37Zheng, X ............................................................. 19Zheng, Y .............................................................. 63Zhenrong, L ......................................................... 57Zherebtsov, A ........................................ 47, 57, 128Zhilyaev, A .......................................................... 89Zhong, C ............................................................. 17Zhong, K ........................................................... 119Zhong, W ............................................ 16, 103, 136Zhong, Y.................................................... 125, 134Zhong, Z ........................................................ 30, 92Zhong-liang, T .................................................... 59Zhonggang, Z ...................................................... 57Zhongliang, T ...................................................... 72Zhou, B ........................................... 11, 47, 65, 136Zhou, C ............................................................... 61Zhou, H ............................................................... 85Zhou, M............................................................... 79Zhou, N ................................................. 41, 68, 139Zhou, P ......................................................... 28, 53Zhou, Q ............................................................... 49Zhou, S ............................................................... 58Zhou, W .............................................................. 11Zhou, X ......................................... 45, 61, 104, 120Zhou, Y ..................... 15, 19, 73, 89, 120, 125, 144Zhouhua, J ........................................................... 21Zhou, Y ............................................................... 56Zhu, H ....................................................... 39, 113Zhu, J .............................. 39, 40, 59, 76, 82, 100, ..................... 103, 119, 131, 136, 141, 145Zhu, L ....................................................... 88, 124Zhu, M ......................................... 24, 99, 141, 145Zhu, Q ............................................................... 94Zhu, S ............................................................... 62Zhu, T ............................................................. 134Zhu, Y .......................... 15, 32, 33, 51, 69, 70, 72, ............. 84, 88, 89, 91, 104, 106, 124, 125Zhu, Z ............................................................. 108Zhuang, H ........................................................... 95Zhucheng, H .................................................. 23, 79Zhuo, C ............................................................. 120Zhuokun, C ......................................................... 68Ziaei, M ............................................................... 29Ziegler, D .................................................... 92, 132Zigler, A .............................................................. 55Zikry, M ............................................................ 122Zimmerman, J ..................................................... 45Zimmermann, E .................................................. 73Zimmermann, J ................................................. 101Ziqian, W ............................................................ 92Zirker, L ............................................................ 118Zirkle, L ............................................................ 110Zok, F ............................................................. 142Zolotorev, V ...................................................... 130Zolotoyabko, E .............................................. 27, 83Zondlo, J ............................................................. 81Zope, R ............................................................... 64Zou, G ......................................................... 34, 67

Zou, J ....................................................... 56, 113Zou, Y ............................................................. 114Zrnik, J ......................................................... 51, 52Zschack, P ........................................................... 26Zu, G ....................................................... 10, 130Zumbilev, A ......................................................... 46Zumbilev, I .......................................................... 46Zuo, L ....................................................... 83, 145Zvereva, E ......................................................... 130

Who We AreThe Minerals, Metals & Materials Society (TMS) is the professional organization encompassing the entire range of materials science and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials. The Society’s broad technical focus covers light metals; electronic, magnetic and photonic materials; extraction and processing; materials processing and manufacturing; and structural materials.

Our MembersIncluded among TMS professional members are metallurgical and materials engineers, scientists, researchers, educators and administrators who work in industry, government and academia, as well as students. They hail from more than 70 countries on six continents.

Our MissionThe mission of TMS is to promote the global science and engineering professions concerned with minerals, metals and materials. The Society works to accomplish its mission by providing technical learning and networking opportunities through interdisciplinary and specialty meetings; continuing education; publications, including four journals and proceedings; and its Web site.

To learn more, visit www.tms.org or www.materialstechnology.org.

TMS184 Thorn Hill RoadWarrendale, PA 15086-7514 USATelephone: (724) 776-9000 • (800) 759-4TMSFax: (724) 776-3770E-mail: [email protected]

Corporate Sponsors

Premier Green Sponsorship

& COMPANY

Lanyards

Tuesday Morning Coffee Break

and BRaDD Workshop

Friends of TMS

Friends of TMSHarbin Dongsheng

WiFi in Exhibit Hall Cyber Center

Front Entrance

Registration Counter

Monday Morning Coffee Break

Friends of TMS

Light Metals Reception

Friends of TMS

Materials Bowl

Information Booth

Young Leader Reception

Friends of TMS

Friends of TMS

Wednesday Morning Coffee Break

D-1 7/25修正

Hotel Key Room

Member Welcome CenterPopcorn Breaks

General Meeting

Friends of TMS

Friends of TMS

Monday Morning Coffee Break

Tuesday Morning Coffee Break

Friends of TMS

Friends of TMS

MK Electron CompanyLead-Free Materials Workshop

CSIRO BraDD Workshop

Characterization of Minerals, Metals & Materials

Reception

Friends of TMS


SAVE THE DATE!February 27 - March 3

San Diego Convention CenterSan Diego, California

The brightest minds and leading industry professionals in the materials world gather at this international forum every year to present and exchange the latest technical advancements.

Nearly 4,000 attendees representing more than 68 countries bring a variety of technical interests and experience to this dynamic conference!

Symposium Proposals in the following areas are now being accepted:

Aluminum and MagnesiumAdvanced Characterization and ModelingElectronic MaterialsHigh Performance Structural MaterialsMaterials and SocietyMaterials Processing and ProductionNanoscale and Amorphous Materials

Visit the www.tms.org/TMS2011 for more information or to submit proposals or abstracts!

•••••••

Documents

“Going for the Gold in Materials Technology”...139th Annual Meeting & Exhibition February 14-18, 2010 • Washington State Convention & Trade Center • Seattle, Washington USA