Aplika ní tabulky GIVI 2012 - motosp.cz tabulky GIVI_2012.pdf · scarabeo 125-200 (da luglio 11) new sr6701 special rack for monolock ... sportcity cube 125-200-300 ... scarabeo

CODE DESCRIPTION NOTE

96 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock

APRILIA - BENELLIBMW

- CAN AM - DUCATI

APRILIASCARABEO 50-100 (09 >11)

152A Specific screen, transparent 48 x 66 cm (H x W)


A152A Specific fitting kit for 152A-153A

YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.

SPORTCITY ONE 50-125 (08 > 11)

SR740 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box



A151A Specific fitting kit for 134A and 136A

SR 50 DITECH (97 > 05)

SR78 Special rack for MONOLOCK® boxes use the plate included in the box

ATLANTIC 125-200-250-300 (03 > 11)

E314M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included

D242ST Specific screen, transparent 84 x 70 cm (H x W) 19 cm higher than original

LEONARDO 125-150 (< 10/01)

D236S Specific screen, smoked 35,5 x 47,7 cm (H x W)

HABANA 125 (00 > 09)

SR74 Special rack

* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)

SCARABEO 125-200 (07 > GIUGNO 11)


A154A Specific fitting kit for 154A

E318 Specific rear plate for MONOLOCK® case use the plate included in the box

SCARABEO 125-200 (DA LUGLIO 11) NEW




SPORTCITY 125-200-250 (04 > 08)




128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm. higher than 105A

SPORTCITY CUBE 125-200-300 (08 > 11)

E319 Specific rear plate for MONOLOCK® case




Application Chart 2012.indb 96 13/03/12 10.15

Aplikační tabulky GIVI 2012


97THE ITALIAN SIGN OF MOTODESIGN

APRI

LIA

- BE

NELL

IBM

W -

CAN

AM

- DU

CATI

LEONARDO 250 (99 > 01)

D238S � Specific screen, smoked 46 x 49,5 cm (H x W)

SCARABEO 250-300 (07 > 11)

E730 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box

E317M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections / maximum load allowed 3 Kg



ATLANTIC 400-500 SPRINT (05 > 11)



SCARABEO 400-500 (06 > 11)


E317M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections / maximum load allowed 3 Kg


A130A � Specific fitting kit for 130A

ATLANTIC 500 (02 > 06)


SCARABEO 500 (03 > 05)


PEGASO 650 CUBE (97 > 00)

D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)

PEGASO 650 IE (01 > 04)

D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)

PEGASO 650 STRADA / TRAIL (05 > 11)

SR79 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg

SHIVER 750 / SHIVER GT 750 (07 > 09)

BF02 Specific metal flange for fitting the TankLock tank bags

SHIVER 750 (10 > 11) NEW

6702FZ Specific Monorack arms only match the plates M5, M5M, M6M / A handle bar for the passenger is included, you must remove the original grab rails

TE6702 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage


DORSODURO 750 (08 > 11)

SR6700 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / you must puncture the housing in arranged sections

SR6700M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections


MANA 850 / MANA 850 GT (08 > 11)

732FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grab handles / is compatible with the original side case holder


2Aplikační tabulky GIVI 2012




- CAN AM - DUCATI

BENELLITRE 899 K / TRE 1130 K (06 > 11) NEW

8700FZ Specific Monorack arms only match the plates M5, M5M, M6M

PL8700 Tubular pannier holder for MONOKEY® boxes you must move the indicators from their original position


BMWF 650 (94 > 96)


F 650 CS SCARVER (02 > 06)

SR682M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 8 Kg

F 650 GS (00 > 03)

639F Specific Monorack arms only match the plates M2, M3, MM / compatible from august ’00 / it is not compatible with the original sidecase holder

PL188 Tubular pannier holder for MONOKEY® boxes

D234S Specific screen, smoked 41,1 x 34 cm (H x W)

F 650 GS (04 > 07)

SR685 Special rack for MONOKEY® boxes


D331ST Specific screen, transparent 39,5 x 44 cm (H x W) 15,5 cm higher than original / not mounted with original guards

F 650 GS / F 800 GS (08 > 11)

E194 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / Is compatible with the rear plate

E194M Specific rear plate MONOLOCK® plate M5M in nylon included

SRA5103 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / Can not be mounted with art. PL690

PL690 Tubular pannier holder for MONOKEY® boxes mounting is only possible with the plate E194

PLR5103 Rapid release tubular side-case holder for MONOKEY® cases

333DT Specific screen, transparent 44 x 46 cm (H x W) 26 cm higher than original F650GS22 cm higher than original F800GS

D333KIT Specific fitting kit for 333DT

TN690 Specific engine guard we recommend fitting by a qualified mechanic

RP5103 Oil carter protector in Aluminium

F 650 GS DAKAR (00 > 03)

639F Specific Monorack arms it is not compatible with the original sidecase holder / only match the plates M3, MM


ETV 1000 CAPONORD (01 > 10)

E313 � Specific rear plate for MONOKEY® case MONOKEY® plate M2 in aluminium included


D239ST Specific screen, transparent 64 x 65,5 cm (H x W) compatible with year 2003 / without protective spoiler





APRI

LIA

- BE

NELL

IBM

W -

CAN

AM

- DU

CATI

F 650 ST (97 > 99)


D232S Specific screen, smoked 43 x 41,5 cm (H x W)

G 650 GS (11) NEW



D5101ST Specific screen, transparent 41 x 39 cm (H x W) 22 cm higher that the original


K75 750

E180 Specific rear plate for MONOKEY® case with plate in aluminium

E181 Specific rear plate for MONOKEY® case with plate in nylon

F 800 R (09 > 11)

SRA691 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case



F 800 S (06 > 11)


PLX687 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES

D332ST Specific screen, transparent 45 x 32 cm (H x W) 17 cm higher than original F800S

F 800 ST (06 > 11)


D332ST Specific screen, transparent 45 x 32 cm (H x W) 7 cm higher than original F800ST

R 850 GS (94 > 01)



R 850 R (95 > 02)

635F Specific Monorack arms is compatible with the original side case holder / only match the plates M3, MM

R 850 R (03 > 07)

SR683 Special rack for MONOKEY® boxes Complete with M5 Monokey plate / it can be mounted with the original side-case holder / maximum load allowed 6 Kg

K 100 1000 (90)



K 1100 RS



R 1100 GS (94 > 99)

SR694 Specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included








- CAN AM - DUCATI

R 1100 R (95 > 01)


R 1100 RS (94 > 98)

E183 Specific rear plate for MONOKEY® case to fit to the original rack

R 1100 RT (96 > 00)


R 1100 S (98 > 06)

681F Specific Monorack arms only match the plates M3, MM / is compatible with the original side case holder

R 1150 GS (00 > 03)

SR694 Specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included


D233S Specific screen, transparent 48,5 x 36,6 cm (H x W)

R 1150 R (01 > 06)

SR683 Special rack for MONOKEY® boxes Complete with M5 Monokey plate / it can be mounted with the original side-case holder / maximum load allowed 6 Kg

R 1150 RT (01)


R 1150 RT (02 > 04)

E191 Specific rear plate for MONOKEY® case to fit to the original rack / MONOKEY® plate E250 included

D241ST Specific screen, transparent 48 x 51 cm (H x W)

K 1200 GT (03 > 04)


K 1200 RS (00 > 04)



K 1200 R (05 > 08) / K 1300 R (09 > 11)

SRA690 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

PLXR691 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the specific plate

K 1200 S (05 > 08) / K 1300 S (09 > 11)



K 1200 GT / K 1300 GT (06 > 10) NEW


R 1200 GS (04 > 11)

SRA692 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11

SR689 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / in replacement of original rack / is compatible with the original side case holder

SR684 Special rack for MONOKEY® boxes to fit to the original rack / maximum load allowed 6 Kg / MONOKEY® plate M5 in nylon included





APRI

LIA

- BE

NELL

IBM

W -

CAN

AM

- DU

CATI



330DT Specific screen, transparent 51,5 x 56,5 cm (H x W) 14,5 cm higher than original / adjustable as the original


AF330 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 54 cm (12 cm of extension) width 54 cm


BF07 Specific metal flange for fitting the TankLock tank bags - only year ’08

BF06 Specific metal flange for fitting the TankLock tank bags - year ’09 - ’11

R 1200 GS ADVENTURE (06 > 11)



R 1200 R (06 > 10)

688FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder / including fixing kit

PLX688 � Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ / can be mounted without the Monorack using the PLX688KIT / it can’t be mounted with the original top case

PLX688KIT � Specific kit to install the PLX without the Monorack

147A Specific screen, transparent 49,5 x 46 cm (H x W)


R 1200 R (11) NEW

SR5100 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included

PLXR5100 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES





R 1200 RT (05 > 11)

E193 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included

CAN AMSPYDER 990 (08 > 11)

PLX770 Tubular pannier holder for V35 MONOKEY® SIDE cases you must move from there original position / you can mount only V35 MONOKEY® SIDE CASES SIDE V35







- CAN AM - DUCATI

DUCATIMONSTER 696 / 796 / 1100 (08 > 11)

780FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg

A780 Specific screen, smoked 34 x 40 cm (H x W) including fixing kit

T681 Tubular side holder for soft luggage

7400KIT Specific kit to install the TE7400 and the T681 without the Monorack


MONSTER S2R / S4R / S4RS 800 - 1000 (04 > 08)


ST 2 / ST 4 900 (97 > 01)

675F Specific Monorack arms only match the plates M3, MM / it is not compatible with the original sidecase holder

ST 3 1000 (04 > 08)

675F Specific Monorack arms only match the plates M3, MM / it is not compatible with the original sidecase holder

MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 06)


MULTISTRADA 620 / MULTISTRADA 1100 (06 > 09)


848 - 1098 - 1198 (07 > 11)


STREETFIGHTER 1098 (09 > 11)

T682 � Tubular side holder for soft luggage

A781A * Specific fitting kit for 247N

* YOU CAN FIND SPOILERS PRICES ON PAGE 48

MONSTER 1100 EVO (11) NEW


A780 Specific screen, smoked 34 x 40 cm (H x W) including fixing kit / it is necessary to remove the small original screen

TE7400 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 7400KIT / you must move the indicators from their original position

7400KIT Specific kit to install the TE7400 and the T681 without the Monorack


MULTISTRADA 1200 (10 > 11) NEW

SR312 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / is compatible with the original side case holder








GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA

GILERATREND 50

M100K � Minirack kit without plate

RUNNER 50-125-180 (99 > 00)


RUNNER 50-125-200 (04 > 05)

E681 Specific rear plate for MONOLOCK® case maximum load allowed 6Kg / use the plate included in the box

RUNNER 50-125-200 (06 > 11)

SR126 Special rack for MONOLOCK® boxes it is neccesary to puncture the housing behind the saddle / maximum load allowed 3 Kg / use the plate included in the box

NEXUS 125 - 250 - 300 - 500 (06 > 11)

E682 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg

E682M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg


TB712 � Specific backrest you must puncture the housing in arranged sections / it cannot be mounted if rack and case are installed

NEXUS 500 (03 > 04)

E680 � Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle

E680M � Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle


NEXUS 500 (05)

E682 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg

E682M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg


TB712 � Specific backrest you must puncture the housing in arranged sections / it cannot be mounted if rack and case are installed

FUOCO 500 (07 > 11)

E710 Specific rear plate for MONOKEY® case MONOKEY® plate M2 in aluminium included

E710M Specific rear plate for MONOLOCK® case use the plate included in the box

340D Specific screen, smoked 64,5 x 54,5 cm (H x W)

D340KIT Specific fitting kit for 340D

GP 800 (08 > 11)

SR127 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / with integrated passenger grabrails

SR127M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / with integrated passenger grabrails


TB711 � Specific backrest it cannot be mounted if rack and case are installed / you must puncture the housing in arranged sections

T750 Tubular side holder for soft luggage to be mounted only the specific side-case





GILERA - HARLEYDAVIDSON - HONDA

HARLEY DAVIDSONSPORTSTER 883-1200 (09 > 11)

TS900 Backrest without luggage carrier

T900 Tubular side holder for soft luggage, chromed

HONDABALI 50-100

A94A � Specific fitting kit for 94A only available if article 94A is already fitted

ZOOMER 50 (RUCKUS 50) (04 > 11)


128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A


A303A � Specific fitting kit for 128A and 105A

LEAD 100 (03 > 07)

259A � Specific screen, transparent 48 x 47 cm (H x W)


LEAD 110 (08 > 11)

314A Specific screen, transparent 52 x 66,5 cm (H x W)



VISION 110 (11) NEW


308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)



@ 125-150 (00 > 03)

183A Screen, transparent 67,9 x 66,5 cm (H x W)


@ 125-150 (04 > 08)

183A Screen, transparent 67,9 x 66,5 cm (H x W)

CBF 125 (09 > 11)


317DT Specific screen, transparent 44,3 x 36 cm (H x W) 14 cm higher than original



CBR 125 (05 > 10)

262FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate





GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA

CBR 125 R (11) NEW


CG 125 TITAN (02 > 04)

25F Specific Monorack arms only match the plates M3, MM

PCX 125 (10 > 11) NEW

E231 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box / you must puncture the housing in arranged sections

D322ST Specific screen, trasparent, 59,5 x 44 cm (H x W) 18,5 cm higher than original

D322S Specific screen, smoked, 59,5 x 44 cm (H x W) 18,5 cm higher than original

323DT Specific screen, transparent 82 x 58 cm (H x W) 41 cm higher than original


SC231 Dry-Cool seat cover specific for Honda PCX 125 (11)

INNOVA 125 (07 > 11)

SR151 Special rack for MONOLOCK® boxes maximum load allowed 3 Kg / use the plate included in the box

DYLAN 125-150 (02 > 07)

SR22 Special rack in replacement of original rack





PANTHEON 125-150 (98 > 02)

SR140 Special rack

D199S * � Specific screen, smoked 49,9 x 72,5 cm (H x W)

D199ST * Specific screen, transparent 49,9 x 72,5 cm (H x W)

D202ST * Specific screen, transparent 60 x 74,4 cm (H x W) 10 cm higher and larger than D199ST and D199S

D199KIT Kit for spoilers D199S, D199ST and 202ST

* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH

PANTHEON 125-150 (03 > 08)

E216 � Specific rear plate

D219ST * Specific screen, trasparent 63 x 72,5 cm (H x W)


SH 125-150 (01 > 04)



TB21 � Specific backrest


SH 125I-150I (05 > 08)










SH 125I-150I (11) NEW


P205 � Single tubular side-case holder Compatible with the following Soft Bags: T467 - T457 - T450 / You have to mount it on the right side of the scooter




SC227 Dry-Cool seat cover specific for Honda SH 125i / 150i (09 > 11)

S-WING 125-150 (07 > 11)



XL 125V VARADERO (01 > 06)

E213 Specific rear plate for MONOKEY® case

E217 Specific rear plate for MONOLOCK® case maximum load allowed 5 Kg / use the plate included in the box







D311S Specific screen, smoked 46 x 33 cm (H x W) 19 cm higher than original

CBF 250 (04 > 06)

261FZ Specific Monorack arms maximum load allowed 6 Kg / we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate

CBF 250 (07 > 08)

264FZ � Specific Monorack arms maximum load allowed 6 Kg / we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate

CBR 250 R (11) NEW


CN 250 (89 > 00)

SR13 � Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included


FORESIGHT 250 (97 > 08)

SR140 Special rack






FORZA 250 (05 > 07)

E220 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / in order to fix you must remove the original backrest

E220M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ in order to fix you must remove the original backrest

D306ST Specific screen, transparent 73 x 61,5 cm (H x W) 34 cm higher than original





GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA

FORZA 250 X / EX (08 >11)

E226 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6 Kg

E226M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / Maximum load allowed 6Kg

315DT Specific screen, transparent 84 x 57,4 cm (H x W) 34 cm higher than original


SH 300I (07 > 10)






SH 300I (11) NEW






SC1100 Dry-Cool seat cover specific for Honda SH300 (11)

SILVER WING 400 (06 > 09)

SR19 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the original case holder

SR19M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the original case holder



AF214 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm

TB19 Specific backrest it can be mounted with the SR19 / SR19M

SW-T 400 - 600 (09 > 11)



D318ST Specific screen, transparent, 89 x 67 cm (H x W) 18 cm higher than the original

D318B Specific sports screen 52 x 49 cm (H x W)




CB 500 (94)

241F � Specific Monorack arms only match the plates M3, MM

CB 500 (97 > 05) / CB 500S (00 > 05)


CBF 500 (04 > 11)

260FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder


PLX174 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX174KIT

PLXR174 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the Monorack






PLX174KIT Specific kit to install the PLX without the Monorack

T218 Tubular side holder for soft luggage compatible from ’05 to ’06

TN450 � Specific engine guard we recommend fitting by a qualified mechanic

CB 600 F HORNET / S (98 > 02)



CB 600 F HORNET (03 > 06)


PL172 � Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack

A305 Specific screen, smoked 31,2 x 40,8 cm (H x W) including fixing kit / it can be installed without taking off the original light fairing / compatible from ’05 to ’06

A756A900 � Specific screen with fitting kit, matt silver - standard 36 x 45 cm (H x W) compatible from ’03 to ’04


CB 600 F HORNET / HORNET ABS (07 > 10)

263FZ Specific Monorack arms only match the plates M5, M5M, M6M / you need to remove the handle bar of the scooter to install it

PLX176 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / is mounted in conjuction with Monorack

A309 Specific screen, smoked 33,5 x 40,5 cm (H x W) including fixing kit / only for CB 600 F Hornet

A310 Specific screen, smoked 33,5 x 40,5 cm (H x W) including fixing kit / only for Hornet ABS





CBF 600S/ CBF 600N (04 > 11)






D303ST Specific screen, transparent 54 x 39,5 cm (H x W) 12,5 cm higher than original / only for faired models


TN369 � Specific engine guard we recommend fitting by a qualified mechanic / compatible with all years ’07

TN456 Specific engine guard we recommend fitting by a qualified mechanic / compatible from ’08


CBR 600 F (97 > 98)


CBR 600 F (99 > 09)

252F Specific Monorack arms it cannot be mounted with T208 / only match the plates M3, MM

D213S � Specific screen, smoked 45,5 x 37 cm (H x W) compatible with model ’01

CBR 600 F (11) NEW


1102KIT Specific kit to install the TE1102 and PLX1102 without the Monorack

PLX1102 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1102KIT

1105D Specific screen, smoked 39,5 x 36 cm (H x W) 5,5 cm higher than the original





GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA


TE1102 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1102KIT


CBR 600 FS (01 > 02)

D213S � Specific screen, smoked 45,5 x 37 cm (H x W)

CBR 600 RR (05 > 06)


CBR 600 RR (07 > 09)


HORNET 600 (11) NEW



A1102 Specific screen, smoked 28,5 x 36 cm (H x W) including fixing kit


1102KIT Specific kit to install the TE1102 and PLX1102 without the Monorack



SILVER WING 600 / ABS (01 > 09)





AF214 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm


VT 600 C SHADOW (89 > 01)

TS800 � Backrest with detachable small luggage carrier

XL 600 RM/LM


XL 600 V TRANSALP (88)


XL 600 V TRANSALP (89 > 93)







D205S Specific screen, smoked 54,2 x 38,9 cm (H x W) 10 cm higher than D191S










D205S Specific screen, smoked 54,2 x 38,9 cm (H x W) 10 cm higher than D191S



NT 650 V DEAUVILLE (98 > 05)

SR15 Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included

SR15M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included


DOMINATOR 650 (< 92)


DOMINATOR 650 (92 > 94)


185D � Specific screen, smoked 30,4 x 31,7 cm (H x W) only with spoiler


DOMINATOR 650 (95)

185D � Specific screen, smoked 30,4 x 31,7 cm (H x W) only with spoiler


DOMINATOR 650 (96 > 02)


XL 650V TRANSALP (00 > 07)


PL167 Tubular pannier holder for MONOKEY® boxes You must move from there original position

D209S Specific screen, smoked 56 x 36 cm (H x W)

T213 Tubular side holder for soft luggage it can be mounted with the specific plate

TN366 Specific engine guard we recommend fitting by a qualified mechanic / mount with central tripod mounted

DN-01 700 (08 > 11)

265FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg



INTEGRA 700 (12) NEW

1108FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the sidecase holder



PL1109 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the 1109KIT


1109KIT Specific kit to install the PLX1109 / PL1109 / TE1109 without the Monorack

NC700X (12) NEW



1111KIT Specific kit to install the TE1111 without the Monorack






GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA

NT 700 DEAUVILLE (06 > 11)

E221 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included/ for fixing the original lid must be drilled

E221M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ for fixing the original lid must be drilled

D307ST Specific screen, transparent 49 x 46,5 cm (H x W) 9 cm higher than the original


XL 700V TRANSALP (08 > 11)

E225 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included


PL203 Tubular pannier holder for MONOKEY® boxes it can be mounted with the specific plate

D313S Specific screen, smoked 44,5 x 37 cm (H x W) 15,5 cm higher than original

T221 Tubular side holder for soft luggage it can be mounted also without the specific plate



AFRICA TWIN 750 (90 > 92)


D181S Specific screen, smoked 48,7 x 33,1 cm (H x W) only with spoiler




TN362 Specific engine guard we recommend fitting by a qualified mechanic / only for ’95






BLACK WIDOW 750 (00 > 02)

A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version

A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version

AS100A2 Specific fitting kit for A23 and A35N


A42 Universal screen, 40,3 x 45,7 cm (H x W) low, transparent version

AS300A2 Specific fitting kit for A41N and A42

CB 750 SEVEN FIFTY (92 > 00)


VFR 750 F (90 > 93)


VFR 750 F (94 > 97)


VT 750S (10 > 11)

A35 Specific screen, transparent 54,9 x 46,8 cm (H x W)


GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA





A23 Specific screen, transparent 38,8 x 41 cm (H x W)

AS122A2 Specific fitting kit for A35 and A23

T223 Tubular side holder for soft luggage, chromed

TS808 Backrest with detachable small luggage carrier, chromed

VT SHADOW 750 (04 > 11)

A23 Universal screen, transparent 38,8 x 41 cm (H x W) low, transparent version




TS806 Backrest with detachable small luggage carrier

VT SHADOW SPIRIT 750 (07 > 10)





A42 Universal screen, 40,3 x 45,7 cm (H x W) low, transparent version

AS300A2 Specific fitting kit for A41N and A42

T220 Tubular side holder for soft luggage mounting is only possible with TS807


CROSSRUNNER 800 (11) NEW


PLXR1104 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDE V35

PLX1104 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1104KIT / you must move the indicators from their original

1104KIT Specific kit to install the PLX1104 without the Monorack



VFR 800 (98 > 01)

257FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself

PL257 Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack


VFR 800 VTEC (02 > 11)

166FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder / reinforced version






CB 900 HORNET (02 > 07)


PL256 � Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack

A257A * � Specific fitting kit for 240A, 240BL and 240N902






GILE

RA -

HAR

LEY

DAVI

DSON

- H

ONDA

CB 1000 R (08 > 11)


A312A * Specific fitting kit for 247A and 247N compatible from ’08 to ’10

A1101A * Specific fitting kit for 247A and 247N compatible from ’11





CBF 1000 / ABS (06 > 09)






D303ST Specific screen, transparent 54 x 39,5 cm (H x W) 12,5 cm higher than original




CBF 1000 / CBF 1000 ST (10 > 11)

SR777 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are reproduced by the rack itself / is compatible with the original side case holder

SR777M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / is compatible with the original side case holder

PLXR208 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / mounting is only possible with SR777 / SR777M or 777KIT


777KIT Specific kit to install the PLXR without the plate

D320ST Specific screen, transparent 49 x 42,5 cm (H x W) 15 cm higher than original / adjustable as the original



CBR 1000 F (89 > 92)


Y155 � Specific wingrack fitting kit only with chassis N141

CBR 1000 F (93 > 00)


Y155 � Specific wingrack fitting kit only with chassis N141

CBR 1000 RR (06 > 07)

D308SP � Protective deflector above applies to the original spoiler for increased protection

CBR 1000 RR (08 > 09)


VTR 1000 F (97 > 04)











D203ST Specific screen, transparent 62,4 x 55 cm (H x W)


XL 1000V VARADERO / ABS (03 > 06)


PL170 Tubular pannier holder for MONOKEY® boxes to be mounted using original bolts




XL 1000V VARADERO / ABS (07 > 11)


PL177 Tubular pannier holder for MONOKEY® boxes it can be mounted with the specific plate




TN454 Specific engine guard we recommend fitting by a qualified mechanic / compatible with all years ’10

CBR 1100 XX (97 > 09)


Y158 Specific wingrack fitting kit only with chassis N140

DH196 Specific screen, smoked 42,6 x 62 cm (H x W)

ST 1100 PAN EUROPEAN

E190 Specific rear plate


CROSSTOURER 1200 (12) NEW

SR1110 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included

SRA1110 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / to be mounted on the original case carrier

VFR 1200 F (10 > 11)

267FZ Specific Monorack arms only match the plates M5, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / is compatible with the original side case holder


267KIT Specific kit to install the PLX without the Monorack



CB 1300 / CB 1300 S (03 > 09)



CB 1300 S (10 > 11)


D324S Specific screen, smoked 56 x 36 cm (H x W) 20,5 cm higher than original







KAWA

SAKI

- K

EEWA

YKT

M -

KIMC

O -

LML

PAN EUROPEAN ST 1300 (02 > 11)


GOLD WING 1800 (01 > 10)

D319ST Specific screen, transparent, 82 x 72 cm (H x W) 20 cm higher than the original / Without the frontal loophole for the original grill

KAWASAKIER 5 500 (98 > 00)


ER 5 500 (01 > 07)


GPZ 500 S (94 > 03)


ER 6N / ER 6F 650 (05 > 08)

445FZ Specific Monorack arms maximum load allowed 6 kg / only match the plate M5M or M6M

PLX445 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ is mounted in conjuction with Monorack / you must move the indicators from their original position

D404S * Specific screen, smoked 59,5 x 35,5 cm (H x W) 8,5 cm higher than the original / for faired version

A445A Specific fitting kit for 245N, 246G730 and 246N902 it requires the fitting of 245N painted black internally as not to reflect the light / not for faired version




ER-6N / ER-6F 650 (09 > 11)

449FZ Specific Monorack arms you need to remove the handle bar of the scooter to install it

PLX449 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / original grabrails should be removed / can be mounted without the Monorack using the PLX449KIT


A448A * Specific fitting kit for 247N only for 6N models

D409S Specific screen, smoked 44 x 35 cm (H x W) 6 cm higher than original / only for ER-6F




ER-6N / ER-6F 650 (12) NEW



A4104 Specific screen, smoked 32 x 30 cm (H x W) including fixing kit / only for ER-6N

D4104S Specific screen, smoked 50 x 40 cm (H x W) 10 cm higher than original / only for ER-6F



ZZR 600 (93 > 01)







KAWASAKI - KEEWAYKTM - KIMCO - LML

KLR 650 ENDURO (07 > 11)


E581M Specific rear plate for MONOLOCK® case


408D Specific screen, smoked 540 x 350 mm (H x W) 23 cm higher than original



VERSYS 650 (06 > 09)

447FZ Specific Monorack arms only match the plates M5, M5M, M6M / including fixing kit

PL447 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the PLX447KIT



D405ST Specific screen, transparent 46 x 44,5 cm (H x W)

VERSYS 650 (10 > 11)


PLR450 Rapid release tubular side-case holder for MONOKEY® cases can be mounted without the Monorack using the 450KIT / you must move the indicators from their original position

PLXR450 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 450KIT / you must move the indicators from their original position

450KIT Specific kit to install the PLR and the PLXR without the Monorack





ZR 7 / ZR 7 S 750 (99 > 04)


Z 750 (04 > 06)


402D Specific screen, smoked 41 x 38,5 cm (H x W)

D402KIT � Specific fitting kit for 402D


Z 750 S (05 > 07)


Z 750 (07 > 11)

448FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position


TE265 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the T265KIT / you must move the indicators from their original position

T265KIT Specific fitting kit for tubular holder


VN 800 CLASSIC (96 > 02)

A36 Specific screen, transparent 40,7 x 41 cm (H x W) low and transparent version / only available if article AS126A2 is already fitted

A37N Specific screen, transparent 54 x 47,2 cm (H x W) high and shaded bottom version / only available if article AS126A2 is already fitted

TS835 � Backrest without luggage carrier compatible from ’00 to ’02





KAWA

SAKI

- K

EEWA

YKT

M -

KIMC

O -

LML

W 800 (11) NEW

SR4101 Special rack


A4101 Specific screen, smoked 37 x 33,5 cm (H x W) including fixing kit


TN4101CR Specific engine guard, chromed we recommend fitting by a qualified mechanic


VN 900 CUSTOM / CLASSIC (06 > 11) NEW


A36 Specific screen, transparent 40,7 x 41 cm (H x W) low and transparent version / only for Classic version

A37N Specific screen, transparent 54 x 47,2 cm (H x W) high and shaded bottom version / only for Classic version

AS128A2 Specific fitting kit for A36 and A37N only for Classic version

A23 Universal screen, transparent 38,8 x 41 cm (H x W) low, transparent version / only for Custom version

A35N Universal screen, transparent 54,9 x 46,8 cm (H x W) high and shaded bottom version / only for Custom version

AS100A2 Specific fitting kit for A23 and A35N only for Custom version

A42 Universal screen, transparent 40,3 x 45,7 cm (H x W) low, transparent version / only for Custom version

A41N Universal screen, transparent 53,7 x 51,6 cm (H x W) high and shaded bottom version / only for Custom version

AS300A2 Specific fitting kit for A41N and A42 only for Custom version



GTR 1000

E128 � Specific rear plate for MONOKEY® case

D74S � Specific screen, smoked 48,2 x 53,5 cm (H x W) only with spoiler

KLV 1000 (04 > 10)





D260ST Specific screen, transparent 57 x 48 cm (H x W) compatible with models ’04 / 18 cm higher than original / only with spoiler



VERSYS 1000 (12) NEW

SR4105 Special rack for MONOKEY® boxes MONOKEY® plate E250 in nylon included

SR4105M Special rack for MONOLOCK® boxes use the plate included in the box

SRA4105 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / to be mounted on the original case carrier

PLR4105 Rapid release tubular side-case holder for MONOKEY® cases you must move the indicators from their original position



AF4105 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 52 cm (12 cm of extension), width 48 cm



Z 1000 (03 > 06)

442FZ � Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg



KAWA

SAKI

- K

EEWA

YKT

M -

KIMC

O -

LML





Z 1000 (07 > 09)

448FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position

A447 Specific screen, smoked cm 34 x 34 cm (H x W) including the kit to specific attachments

Z 1000 (10 > 11)


T267 Tubular side holder for soft luggage can be mounted without the Monorack using the T267KIT

T267KIT Specific fitting kit for tubular holder



Z 1000 SX (11) NEW


PLXR4100 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 4100KIT

4100KIT Specific kit to install the PLXR4100 without the Monorack

4100D Specific screen, smoked 56 x 37 cm (H x W) 14 cm higher than original




ZRX 1100 / ZRX 1100 S (97 > 01)

433F Specific Monorack arms maximum load allowed 6 Kg / only match the plates M3, MM

D174S Specific screen, smoked 36,2 x 32,1 cm (H x W) for faired version

ZZR 1100 (93 > 01)


ZZR 1200 (02 > 05)

441FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself


ZRX 1200 (02)


ZRX 1200 R (02)



ZRX 1200 S (01 > 02)


GTR 1400 (07 > 11)

SR410 Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included

D407ST Specific screen, transparent 58 x 53 cm (H x W) 8,5 cm higher than original (07 > 09) / 2,5 cm higher than original (10)

ZZR 1400 / ZX 14 (06 > 11)








KAWA

SAKI

- K

EEWA

YKT

M -

KIMC

O -

LML

KEEWAYGOCCIA 50 (09 > 11)

E851 � Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box



RY6 50 (10 > 11)



A853A Specific fitting kit, black for 288A

RY8 50 EVO SPORT (10 > 11)




OUTLOOK 125-150 (09) NEW




KTMDUKE 125 (11) NEW


A7701A * Specific fitting kit for 247A and 247N



ADVENTURE 950 / 990 (03 > 11)




990 SMT (09 > 11)

SRA750 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case








KYMCOAGILITY 50-125-150 R16 (08 > 11)





DINK 50-125-200I (06 > 11)


292DT Specific screen, transparent 67 x 58 cm (H x W) 37 cm higher the original


LIKE 50-125-200I (09 > 12)




442A � Specific screen, transparent. 52 x 66.6 cm (H x W)


PEOPLE S 50-125-200 (05 > 11)




B&W 125-150 (00 > 06)

102A Specific screen, transparent 66 x 68 cm (H x W) only available if article A135A is already fitted


DOWNTOWN 125I-300I (09 > 11)

SR92 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg

SR92M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box

TB82 Specific backrest it cannot be mounted if rack and case are installed

D294ST Specific screen, transparent 81.5 x 64 cm (H x W) 15,5 cm higher than original

DINK CLASSIC 125-150 (97 > 06)

SR80 � Special rack for MONOLOCK® boxes it requires fitment of cases up to 42 ltr

132A * Specific screen, transparent 72,5 x 55,1 cm (H x W)



GRAND DINK 125-150-250 (00 > 07)

SR87 � Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included


290DT Specific screen, transparent 60,6 x 70 cm (H x W)

D290KIT � Specific fitting kit for 290DT

G-DINK 125-300 (12) NEW






MBK

- MO

TO G

UZZI

MOTO

MORI

NI -

PEU

GEOT

PEOPLE GTI 125-300 (10 > 11)


443A Specific screeen, transparent 53 x 72 cm (H x W)


PEOPLE 250 (04 > 05)

A45 � Specific screen, transparent 60, 5 x 69,5 cm (H x W)

XCITING 250-300-500 (05 > 09)





XCITING R 300I-500I (09 > 11)




D295ST Specific screen, transparent 85.5 x 66 cm (H x W) 25 cm higher than original


MYROAD 700 (11) NEW


SR6100M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included

LMLSTAR 125-150 (09 > 11)





MBKOVETTO 50-100 (97 > 02)


OVETTO 50 (08 > 11)









MBK - MOTO GUZZIMOTOMORINI - PEUGEOT

CITYLINER 125 (07 > 11)


D439ST Specific screen, transparent with serigraphy 71 x 77 cm (H x W) 22 cm higher than original

FLAME X 125 (07 > 11)





SKYCRUISER 125 (05 > 09)

SR355 Special rack for MONOKEY® boxes you must puncture the housing in arranged sections / MONOKEY® plate M5 in nylon inlcuded

SR355M Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box

D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W) 25,5 cm higeher than original


SKICRUISER 125 (10 > 11)

SR370 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle

SR370M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / it is neccesary to puncture the housing behind the saddle / use the plate included in the box






SKYLINER 125-150 (99 > 00)

SR43 � Special rack


SKYLINER 125-150 CAT. (01 > 11)



130DT Specific screen, transparent 69,2 x 68,2 cm (H x W)


WAAP 125 (10 > 11)




SKYLINER 250 (00 > 07)


SR44M � Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included

D124ST * Specific screen, transparent 80 x 70,7 cm (H x W) with air intake

D127ST * Specific screen, transparent 80 x 70,7 cm (H x W) without moulding steel / without a hole for the air

* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH

KILIBRÈ 300 (03 > 07)


TB50 � Specific backrest it cannot be mounted if rack and case are installed





MBK

- MO

TO G

UZZI

MOTO

MORI

NI -

PEU

GEOT

MOTO GUZZIBREVA 750 (03 > 11)


BREVA 850-1100-1200 (05 > 11)

SR210 Special rack for MONOKEY® boxes is compatible with the original side case holder / MONOKEY® plate M5 in nylon included

SR210M Special rack for MONOLOCK® boxes is compatible with the original side case holder / MONOLOCK® plate M5M in nylon included

NORGE 850-1200 (06 > 11)


SR210M Special rack for MONOLOCK® boxes is compatible with the original side case holder / MONOLOCK® plate M5M in nylon included

STELVIO 1200 (08 > 11)



PL708 � Tubular pannier holder for MONOKEY® boxes

D610ST Specific screen, transparent 61 x 46 cm (H x W) 13 cm higher than original / 13 cm più alto dell’originale / compatible from ’08 to ’10

MOTO MORINIGRANPASSO 1200 (08 > 11)


SR780M � Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included

PEUGEOTTWEET 50-125-150 (10 > 11)



LXR 125-200 (09 > 11)





GEOPOLIS 125-250-400 (07 > 11)

SR63 Special rack for MONOLOCK® boxes maximum load allowed 6 Kg / use the plate included in the box / only for 250 cc. version.

SR64 � Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box / only for 400 cc. version.

SV 250 (02)

SR140 Special rack







PIAGGIO - SUZUKISYM - TRIUMPH

PIAGGIOFLY 50-100-125-150 (04 > 11)




GRILLO 50

M150K � Minirack kit without plate

LIBERTY 50-125-150-200 (02 > 08)

SR103 � Specific plate for MONOLOCK® boxes only for 125-150-200 cc version / use the plate included in the box

E342 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr



LIBERTY S 50-125-200 (06 > 11)

SR107 Special rack for MONOLOCK® boxes it is necessary to remove the original grab handle / maximum load allowed 3 kg / use the plate included in the box

LIBERTY 50-125-150 (09 > 11)


E342 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr



SC132 Dry-Cool seat cover specific for Piaggio Liberty 50-125-150 (09 > 11)

TYPHOON 50-125 (11)




VESPA LX 50-125-150 (05 > 11)


104A Specific screen, transparent 51,5 x 69,5 cm (H x W)


VESPA S 50-125-150 (07 > 11)


355A � Specific screen, transparent 60 x 69 cm (H x W)

354A � Specific screen, transparent 60 x 69 cm (H x W) with fantasy serigraphy









PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H

ZIP 50-125 (00 > 11)

SR56 Special rack


BEVERLY 125-200 (01 > 04)

E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg

BEVERLY 125-250-400 (04 > 07)

E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / only for ’04 version

E344 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible from model ’05

A350A � Specific fitting kit for 113A, 113AS and 114AS only available if article 113A, 113AS or 114AS is already fitted

BEVERLY TOURER 125-250-300-400 (08 > 10)






BEVERLY 125IE-300IE (10 > 11)






E109B Polyurethane backrest, brown, specific for Monolock® top-cases E370

CARNABY 125-200-250 (07 > 11)


113ASF � Specific screen, transparent with serigraphy 66 x 67 cm (H x W)

MP3 125-250-300-400 (06 > 11)

SR134 “Folding” specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR134M “Folding” specific plate for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR108 Special rack for MONOKEY® boxes complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg

SR108M Special rack for MONOLOCK® boxes complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg

D501ST * Specific screen, transparent 82 x 64 cm (H x W) 40 cm higher than original (06-08 Model) / 24 cm higher than original (09 Model)

D502S Specific screen, smoked 58 x 46 cm (H x W) 16 cm higher than original (06>08 model) / The same height as the original (09 model)

D504ST Specific screen, transparent 74 x 64 cm (H x W) 32 cm higher than original (06>08 model) / 16 cm higher than original 09 model)




MP3 YOURBAN 125-300 (11) NEW



SR5600MM Special rack for MONOLOCK® boxes maximum load allowed 6 kg / MONOLOCK® plate M6M in nylon included

5600DT Specific screen, transparent 67 x 74 cm (H x W) 35,5 cm higher than original








D5600ST Specific screen, transparent 57 x 44,5 cm (H x W) 25,5 cm higher than original


VESPA PX 125-150-200


VESPA PX 125-150 (11 > 12) NEW




VESPA 125-200 GRANTURISMO (03 > 08)



X7 125-250 (08 > 11)

SR109 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / it is neccessary to drill the handle and mudguard / maximum load allowed 6 kg

SR109M Special rack for MONOLOCK® boxes it is neccessary to drill the handle and mudguard / maximum load allowed 6 kg / use the plate included in the box

D503ST � Specific screen, transparent 62 x 56 cm (H x W) 17 cm higher than original

X7 EVO 125I-300I (09 > 10)


D503ST � Specific screen, transparent 62 x 56 cm (H x W) 17 cm higher than original

X8 125-150-200-250-400 (04 > 10)




X9 125-180-250 (00 > 02)


SR54M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in nylon included


D227ST � Specific screen, transparent 81,2 x 50,1 cm (H x W) for 250 cc version / only till years ’01

TB54 Specific backrest

X-EVO 125-250-400 (07 > 11)




X9 200-250-500 EVOLUTION (03 > 08)










PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H

BEVERLY CRUISER 250 - 500 (07 > 11)

E345 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / Maximum load allowed 6 Kg

E345M Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / use the plate included in the box

352A Specific screen, transparent with serigraphy 50,5 x 78,5 cm (H x W)



VESPA GTS 250 (06 > 11)



CARNABY CRUISER 300 (09 > 11)




MP3 TOURING 300 - 400 (11) NEW

SR134 “Folding” specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR134M “Folding” specific plate for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR108 Special rack for MONOKEY® boxes complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg

SR108M Special rack for MONOLOCK® boxes complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg



VESPA GTS 300 SUPER (08 > 11)




SC131 Dry-Cool seat cover specific for Piaggio Vespa GTS 300 Super (08 > 11)

BEVERLY 500 (03 > 07)

E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible with ’03 and ’04

E344 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible from ’05





X9 500 (01 > 02)










SUZUKISIXTEEN 125-150 (08 > 11)

E532 � Specific rear plate for MONOLOCK® case use the plate included in the box

169A Specific screen, transparent with serigraphy 56,5 x 71,5 cm (H x W)


UH 125-150 BURGMAN (02 > 05)

SR114 Special rack for MONOLOCK® boxes use the plate included in the box / maximum load allowed 4 kg


BURGMAN 125-200 K7-K8-K9-L0 (06 > 11)

SR118 Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box

SR117M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 3 kg

267DT * Specific screen, transparent 88,5 x 65,5 cm (H x W) 33 cm higher the original

D267KIT * Specific fitting kit for 267DT




AN 250-400 BURGMAN (98 > 02)


SR111M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included

156D * Specific screen, smoked 72,5 x 79,5 cm (H x W)

156DT * Specific screen, transparent 72,5 x 79,5 cm (H x W)

D156KIT * Specific fitting kit for 156D and 156DT


AN 250-400 BUSINESS (01 > 03)


156D * Specific screen, smoked 72,5 x 79,5 cm (H x W)

156DT * Specific screen, transparent 72,5 x 79,5 cm (H x W)

D156KIT * Specific fitting kit for 156D and 156DT


AN 250-400 BURGMAN (03 > 06)



TU 250X (97 > 04)

A601 Universal screen with 2 point handlebar, bronzè 36,9 x 42,5 cm (H x W)

AN 400 BURGMAN TYPE-S (05)


BURGMAN 400 K7-K8-K9 (06 > 11)

E531 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included/ it is neccesary to puncture the housing behind the saddle

E531M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ it is neccesary to puncture the housing behind the saddle







PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H


TB531 Specific backrest it can be mounted only if rack and case are installed


GS 500 E (97 > 00)


GS 500 E (01 > 07) / GS 500 F (04)


GSF 600 BANDIT / S (96 > 99)



GSF 600 BANDIT / S (00 > 04)





GSR 600 (06 > 11)

SR116 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included/ you must remove the grabrails / maximum load allowed 6 kg

SR116M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails / maximum load allowed 6 kg

PLX538 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ mounting is only possible with SR116 / SR116M

A167A * Specific fitting kit for 245A, 245N and 246_ _ _ it requires the fitting of 245N painted black internally as not to reflect the light / compatible with ’06 and ’07

A170A * Specific fitting kit for 247A and 247N compatible only with ’08 model

T255 Tubular side holder for soft luggage to be mounted only with SR116 / SR116M




GSX 600 F (98 > 02)


GSX 600 F (03 > 06)


GSX R 600 / 750 (08 > 10)


AN 650 BURGMAN EXECUTIVE (02 > 11)

E529 Specific rear plate for MONOKEY® case the rack cannot be mounted in conjunction with the TB529 / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest

E529M Specific rear plate for MONOLOCK® case the rack cannot be mounted in conjunction with the TB529 / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest

D257ST Specific screen, transparent 80 x 72 cm (H x W) compatible with all years ’04

D263ST Specific screen, transparent 78,5 x 72 cm (H x W) for models having electrically adjustable screen / compatable from ’05

DL 650 V-STROM (04 > 11)





PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H







D260ST Specific screen, transparent 57 x 48 cm (H x W) 18 cm higher than original / only with spoiler

AF260 Specific sliding wind-screen for, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm



DL 650 V-STROM L2 (11 > 12) NEW

SR3101 Special rack for MONOKEY® boxes MONOKEY® plate E250 in nylon included


SRA3101 Special rack in aluminium for Monokey® cases, black maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case




AF3101 Specific sliding wind-screen , transparent, complete with fitting kit. Maximum height 56 cm (12 cm of extension) width 43 cm

3101DT Specific screen, transparent 52 x 46 cm (H x W)



RP3101 Oil carter protector in Aluminium


GLADIUS 650 (09 > 11)

SR121 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg

SR121M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg


A172 Specific screen, smoked 29,5 x 30,5 cm (H x W) including fixing kit

A172S Specific screen, black and grey 29,5 x 30,5 cm (H x W) including fixing kit



GSF 650 BANDIT / BANDIT S / BANDIT ABS (05 > 06)


PL534 � Tubular pannier holder for MONOKEY® you must move from there original position / only for version without ABS

D262S Specific screen, smoked 45,7 x 3,6,5 cm (H x W) 11,7 cm higher than original / for semi faired version

GSF 650 BANDIT / GSF 650 BANDIT S K7-K8 (07 > 11)



PLX539 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position

A168A Specific fitting kit for 245A and 245N it will be necessary to remove the original painted trim above the headlight / it requires the fitting of 245N painted black internally as not to reflect the light

D262S Specific screen, smoked 45,7 x 36,5 cm (H x W) 11,7 cm higher than original / for semi faired version


* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.

GSF 650 BANDIT / GSF 650 BANDIT S K9 (09 > 11)


PLXR541 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack


* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.






PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H

GSX 650F (08 > 11)




D270S Specific screen, smoked 45 x 38,5 cm (H x W) 10 cm higher than original


SV 650 / SV 650 S (99 > 02)

521FL Specific Monorack arms only match the plate M35

SV 650 / SV 650 S (03 > 08)


GSX 750 (98 > 02)



GSX 750 F (98 > 02)


GSX 750 F (03 > 06)


GSR 750 (11) NEW

3100FZ Specific Monorack arms only match the plates M5, M11, M5M, M6M


TE3100 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 3100KIT / you must move the indicators from their original position



VS 800 INTRUDER

A10 Specific screen, bronze 37,1 x 39,2 cm (H x W) only available if article A93A is already fitted

DL 1000 V-STROM (02 > 11)





D255ST Specific screen, transparent 60 x 37,5 cm (H x W) only with spoiler / 16 cm higher than original / compatable from ’02 to ’03

D260ST Specific screen, transparent 57 x 48 cm (H x W) 18 cm higher than original / only with spoiler / compatible from year ’04

AF260 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm compatible from year ’04



SV 1000 / SV 1000 S (03 > 08)


GSX 1200 (98 > 02)







GSF 1200 BANDIT (96 > 99)


GSF 1200 BANDIT / BANDIT S (00 > 05)


PL523 Tubular pannier holder for MONOKEY® boxes You must move from there original position

D252S Specific screen, smoked 44,8 x 39,7 cm (H x W) only for faired version

GSF 1200 BANDIT / BANDIT S (06)



GSF 1250 BANDIT / BANDIT S (07 > 11)




A168A Specific fitting kit for 245N it requires the fitting of 245N painted black internally as not to reflect the light


GSX 1300R HAYABUSA (08 > 11)

541FZ Specific Monorack arms only match the plates M5, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / maximum load allowed 6 Kg

GSX 1400 (02 > 09)


PL527 � Tubular pannier holder for MONOKEY® mounting is only possible with Monorack arms / compatible with models from ’02 to June ’05

TN394 � Specific engine guard we recommend fitting by a qualified mechanic / compatible with models from July ’05

SYMFIDDLE II 50-125 (09 > 11)



SYMPHONY 50-125-151 (09 > 11)



296A Specific screen, transparent with serigraphy 52 x 63 cm (H x W)

A294A Specific fitting kit for 294A-296A Only for 50 cc. version

A295A Specific fitting kit for 294A-296A Only for 125 cc. version



SYMPHONY SR 50-125-151 (10 > 11)







PIAG

GIO

- SU

ZUKI

SYM

- TR

IUMP

H

SYMPLY 125 (08 >09)




JOYRIDE 125-150-200 (01 > 08)



JOYRIDE EVO 125-200 (09 > 11)

SR233 � Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg

SR233M � Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box

D651ST Specific screen, transparent 62 x 60 cm (H x W) 15,5 cm cm higher than original

HD 125-200 (05 > 07)


128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A / only available if article A290A is already fitted

HD EVO 125-200 (07 > 11)






HD2 125-200 (11) NEW




JOYMAX 250 (05 > 08) / JOYMAX EVO (09 > 11)

SR230 Special rack



CITYCOM 300 (08 > 11)

SR231 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the housing in arranged sections



MAXSYM 400 (11) NEW










TRIUMPHSTREET TRIPLE 675 (07 > 11)





BONNEVILLE 865

SR226 Special rack, chromed


TIGER 800 / TIGER 800 XC (11) NEW


SRA6401 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / you must puncture the housing in arranged sections


6401DT Specific screen, transparent 53 x 46,5 cm (H x W) 17 cm higher than original


AF6401 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 60,5 cm (12 cm of extension) width 45,5 cm



TIGER 955 (00 > 01)

E250 Universal rear plate complete with fitting kit for MONOKEY®. to fit to the original rack

TIGER 1050 (07 > 11)

SR225 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg / it is not compatible with the original sidecase holder


D225ST Specific screen, transparent 50,5 x 49,3 cm (H x W) 12,5 cm higher than original


T704 Tubular side holder for soft luggage can be mounted without the SR225 using the T700KIT

T700KIT Specific kit to install the T704 without the plate


ST 1050 SPRINT (05 > 11)


D224S � Specific screen, smoked 49,5 x 39 cm (H x W) only with spoiler / 12 cm higher than original


SPEED TRIPLE 1050 (08 > 10)

T702 Tubular side holder for soft luggage for models from ’08


SPEED TRIPLE 1050 (11) NEW


SPRINT GT 1050 (10 > 11) NEW

SRA227 Special rack in aluminium for Monokey® cases, black it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case

D6400S Specific screen, smoked 49,5 x 38,5 cm (H x W) including the kit to specific attachments






YAMA

HA

YAMAHABW’S 50 (05 > 11)

SR356 Special rack for MONOLOCK® boxes it is necessary to remove the original grab handle / use the plate included in the box

NEO’S 50-100 (97 > 02)


NEO’S 50 (08 > 11)





BW’S 125 (10 > 11)

SR372 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box / you must remove the grab rails, they are replaced by the rack itself



CIGNUS X 125 (04 > 06)


CIGNUS X 125 (07 > 11)





MAJESTY 125-150 (99 > 00)



MAJESTY 125-150-180 (01 > 11)



130DT Specific screen, transparent 69,2 x 68,2 cm (H x W)


VITY 125 (10 > 11)




X-CITY 125-250 (07 > 11)



XENTER 125-150 (12) NEW

SR2102 Special rack maximum load allowed 6 kg


YAMA

HA




YAMAHA



X-MAX 125-250 (05 > 09)

SR355 Special rack for MONOKEY® boxes you must puncture the housing in arranged sections / MONOKEY® plate M5 in nylon inlcuded


D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W) 25,5 cm higeher than original


X-MAX 125-250 (10 > 11)


SR370M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / it is neccesary to puncture the housing behind the saddle / use the plate included in the box






XT 125 R/X (05 > 11)


MAJESTY 250 (96 > 99)

SR42 � Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included


D115ST * Specific screen, transparent 73 x 79 cm (H x W)


MAJESTY 250 (00 > 07)



D124ST * Specific screen, transparent 80 x 70,7 cm (H x W) with air intake

D127ST * Specific screen, transparent 80 x 70,7 cm (H x W) without moulding steel / without a hole for the air

* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH

XV 250 VIRAGO ( > 99)


A14 Specific screen, transparent 38,7 x 40,8 cm (H x W) low and transparent version

XC 300 VERSITY (03 > 07)



MAJESTY 400 (04 > 08)



D137ST Specific screen, transparent 74 x 64 cm (H x W) 4 cm higher than the original


TB48 Specific backrest it cannot be mounted if rack and case are installed / compatible from ’04 to ’06


YAMAHA




YAMA

HA

MAJESTY 400 (09 > 11)



D445B � Specific sports screen, black. 66 x 44 cm (H x W)

445DT Specific screen, transparent 86 x 66 cm (H x W) 22.5 cm higher than original


AF445 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 79.3 cm (12 cm of extension) width 65 cm




T-MAX 500 (01 > 07)



D128B Specific sports screen , smoked 52 x 44,5 cm (H x W)





T-MAX 500 (08 > 11)


SR364M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle



SR369 � Special rack for MONOKEY® boxes Can not be mounted with art. TB52 or T273 / MONOKEY® plate M5 in nylon included / maximum load allowed 5 Kg / It is necessary to drill the tail fairing of the scooter in the indicated points to mount it

SR369M � Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / it is necessary to drill the tail fairing of the scooter in the indicated points to mount it / maximum load allowed 5 Kg / Can not be mounted with art. TB52 or T273

SR2100 Special rack for MONOKEY® boxes maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company

D442B Specific screen, black 59 x 45 cm (H x W) including two rubber stoppers to close the holes of mirrors for those who want to move from the original place



TB52 � Specific backrest to be mounted only with specific carrier

TB53 Specific backrest it cannot be mounted if rack and case are installed / you must puncture the housing in arranged sections


SC2013 Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)

T-MAX 530 (12) NEW




SC2013 Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)

XV 535 VIRAGO (89 > 00)


A14 Specific screen, transparent 38,7 x 40,8 cm (H x W) low and transparent version

FZS 600 FAZER (98 > 99)







YAMAHA

FZS 600 FAZER (00 > 03)


D122S Specific screen, smoked 42 x 34,4 cm (H x W) compatible from ’00 to ’01

FZ6/FZ6 600 FAZER (04 > 06)




D136ST Specific screen, transparent 61 x 53,5 cm (H x W) 12,5 cm higher than original / for faired version

140D Specific screen, smoked 35 x 36cm (H x W) not for faired version



T351 Tubular side holder for soft luggage can be mounted without the Monorack using the 351KIT

351KIT Specific kit to install the PL351 and T351 without the Monorack


FZ6 S2 / FZ6 600 FAZER S2 (07 > 11)




440D Specific screen, transparent 57 x 57 cm (H x W) 19 cm higher than the original / for faired version

D440KIT Specific fitting kit for 440D for faired version

D441S Specific screen, smoked 54 x 33,5 cm (H x W) 16 cm higher than original / does not need attaches / for faired version

A284A * � Specific fitting kit for 245A, 245N, 246_ _ _ not for faired version



351KIT Specific kit to install the PL360, PLX360, TE351 without the Monorack



XJ 600 DIVERSION (91 > 95)





XJ 600 DIVERSION N (96 > 99)


XJ6 / XJ6 DIVERSION / XJ6 DIVERSION F 600 (09 > 11)



A286 Specific screen, smoked 28 x 30 cm (H x W) including fixing kit / only for XJ6

A286NO Specific screen, black 28 x 30 cm (H x W) including fixing kit / only for XJ6

D444S Specific screen, smoked 42.5 x 38 cm (H x W) 10 cm higher than original / only for XJ6 Diversion

D449S Specific screen, smoked, 50 x 38 cm (H x W) 19,5 cm higher than original / only for XJ6 Diversion F





YAMAHA




YAMA

HA

XT 600 E (95 > 02)


MT 03 600 (06 > 11)

356FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / with integrated passenger grabrails

A281A * Specific fitting kit for 245A, 245N, 246_ _ _





YZF 600 THUNDER CAT (96 > 02)


YZF 600 R6 (06 > 07)


XVS 650 DRAG STAR (97 > 02)




XVS 650A DRAG STAR CLASSIC (98 > 07)

A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)

AS102A2 Specific fitting kit for A39


XT 660 R / XT 660 X (04 > 06)




XT 660 R / XT 660 X (07 > 11)

SR365M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 3 kg


D433S Specific screen, smoked 37 x 36,5 cm (H x W) only for XT 660 R version


XT 660Z TENERÉ (08 > 11)








XTZ 750 SUPER TENERÉ (89 > 99)


D98S Specific screen, smoked 35,4 x 28,6 cm (H x W) compatible from ’91 to ’94


YAMA

HAYA

MAHA




YAMAHA

XV 750 VIRAGO (89 > 98)

A35N Universal screen, transparent 54,9 x 46,8 cm (H x W) compatible from ’92 to ’98 / high and shaded bottom version

A23 Universal screen, transparent 38,8 x 41 cm (H x W) compatible from ’92 to ’98 / low, transparent version

AS99A2 � Specific fitting kit for A23 and A35N

FZ8 / FAZER 8 800 (10 > 11)


SR2100 Special rack for MONOKEY® boxes maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company

PLXR366 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 366KIT

366KIT Specific kit to install the PLXR366 and TE366 without the Monorack

A287 Specific screen, smoked 28 x 30 cm (H x W) including fixing kit / not for faired version

A287N Specific screen, black 28 x 30 cm (H x W) including fixing kit / not for faired version

D448S Specific screen, smoked 55,5 x 55,5 cm (H x W) 19 cm higher than original


TE366 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the 366FZ Monorack using the 366KIT


TDM 850 (96 > 01)


PLA336 Tubular side-case holder (black) in order to fix the top-case you have to combine with PA01


TDM 900 (02 > 11)

347F Specific Monorack arms only match the plates M3, MM / maximum load allowed 6 Kg

SR347 Special rack maximum load allowed 5 kg

PL347 Tubular pannier holder for MONOKEY® boxes maximum load allowed 3 kg / the indicators must be moved from original position


D132S Specific screen, smoked 41 x 32,5 cm (H x W) only with spoiler






Y215 Specific wingrack fitting kit only with chassis N140

XVS 950 A MIDNIGHT STAR (09 > 11)


A47 Specific screen, transparent 56 x 57 cm (H x W)

AS103A2 Specific fitting kit for A46, A47


FZS 1000 FAZER (01 > 02)



FZS 1000 FAZER (03 > 05)


PL349 Tubular pannier holder for MONOKEY® boxes you can only mount MONOKEY® E21 CRUISER cases / is mounted in conjuction with Monorack


YAMAHA




YAMA

HA


FZ1 FAZER 1000 (06 > 11)

359FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate / It requires fitment of cases up to 37 ltr / maximum load allowed 6 kg

PLX359 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position / can be mounted without the Monorack using the PLX359KIT

PLXR359 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDE V35 / can be mounted without the Monorack using the PLX359KIT

PLX359KIT Specific kit to install the PLX and the PLXR without the Monorack

D437S Specific screen, smoked 52 x 44 cm (H x W) 14 cm higher than the original



FZ1 1000 (06 > 11)

365FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg

PLX359 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / you must move the indicators from their original position / can be mounted without the Monorack using the 365KIT

PLXR359 Tubular pannier holder for V35 MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT

365KIT Specific kit to install the PLX and the PLXR without the Monorack


T271 Tubular side holder for soft luggage can be mounted without Monorack


YZF R1 1000 (09)


BT 1100 BULLDOG (02 > 09)


XV 1100 VIRAGO (89 > 99)



AS99A2 � Specific fitting kit for A23 and A35N

XVS 1100 DRAG STAR (99 > 02)




XVS 1100 DRAG STAR CLASSIC (00 > 02)

A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)

AS102A2 Specific fitting kit for A39

FJ 1100


FJ 1200 (87 > 99)


XJR 1200 (95 > 98)





142 � = Item available until it runs out of stock

YAMAHA

V-MAX 1200

A123 Specific screen, smoked 31 x 29,5 cm (H x W)

XT 1200Z SUPER TENERÉ (10 > 11)

SR371 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / is compatible with the original side case holder / to open the original side -cases you ought to remove the back top case from the plate

SRA2101 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / to open the original side -cases you ought to remove the back top case from the plate / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case







FJR 1300 (01 > 05)



FJR 1300 (06 > 11)

E228 Specific rear plate for MONOKEY® case Maximum load 6 Kg. / Complete with M5 Monokey plate

E228M Specific rear plate for MONOLOCK® case Maximum load 6 Kg. / Complete with M5M Monolock plate


PLX357 � Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / to be mounted only the specific side-case

D436ST Specific screen, transparent 52 x 49,5 cm (H x W) 5 cm higher that the original


XJR 1300 (98 > 02)


XJR 1300 (04 > 06)


XJR 1300 (07 > 11)



XVS 1300 MIDNIGHT STAR (07 > 11)

A46 Specific screen, transparent 56 x 57 cm (H x W)

AS103A2 Specific fitting kit for A46, A47




Documents

Aplika ní tabulky GIVI 2012 - motosp.cz tabulky GIVI_2012.pdf · scarabeo 125-200 (da luglio 11) new sr6701 special rack for monolock ... sportcity cube 125-200-300 ... scarabeo