English

Rev. 1.0.0 / 2017-02-13

Appliance

IPS 10 000 SMAVIA Enterprise JBOD

Quick Guide

SMAVIA Appliance

www.dallmeier.com 2

Information about copyright, trademarks, design patents

© 2017 Dallmeier electronic

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

We reserve the right to make technical modifications.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer.

Dallmeier electronic GmbH & Co.KGBahnhofstr. 1693047 RegensburgGermany

www.dallmeier.cominfo@dallmeier.com

All trademarks identified by ® are registeres trademarks of Dallmeier electronic.

All trademarks identified by *) are trademarks of the following owners:

Third-party trademarks are named for information purposes only.Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of thirdparty trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

SMAVIA Appliance

www.dallmeier.com 3

1 Introduction ...................................................................................................41.1 Validity .............................................................................................................41.2 Documents ......................................................................................................41.3 Typographical Conventions.............................................................................5

2 Safety Instructions........................................................................................6

3 General Notes................................................................................................83.1 Appropriate Use ..............................................................................................83.2 Warranty .........................................................................................................83.3 Approvals/Certifications ..................................................................................8

4 Installation .....................................................................................................94.1 Required Components ....................................................................................94.2 Requirements..................................................................................................94.3 Installation .....................................................................................................10

5 Configuration ..............................................................................................115.1 Local Login....................................................................................................115.2 Remote Login................................................................................................125.3 JBOD-Storage Configuration ........................................................................145.4 HDD Management ........................................................................................14

Table of Contents

SMAVIA Appliance

www.dallmeier.com 4

1.1 ValidityThis document is valid for the SMAVIA Recording Server appliance IPS 10 000 in con-junction with a SMAVIA Enterprise JBOD extension.The images in this document might differ from the actual product.

1.2 DocumentsData SheetTechnical specifications and data(for trained system integrators)

CommissioningInstructions for installation, connection and commissioning(for trained system integrators)

Service (this document)Instructions for maintenance and cleaning(for trained system integrators)

ConfigurationInstructions for configuring the software (for trained system integrators)

Quick Guide (this document)Instructions for connecting and configuring a JBOD extension(for trained system integrators)

1 Introduction

SMAVIA Appliance

www.dallmeier.com 5

1.3 Typographical ConventionsThis document may contain various warning words and symbols that indicate potential sources of danger.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

NOTICE indicates practices for preventing property damage, incorrect configurations or faulty operations.

For reasons of clarity and readability, various text formatting elements and types of em-phasis are used in this documentation:

Instructions are indicated by arrows (). Always carry out instructions one after the other in the sequence described.

Expressions in bold/italics generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu entries).

Paragraphs in italics provide information on basic principles, special features and efficient procedure as well as general recommendations.

SMAVIA Appliance

www.dallmeier.com 6

Only use the units described in this document if they are technically in proper working condition and for the intended purpose while keeping safety and potential dangers in mind.

QualifiedPersonnelThe installation, mounting, connection, commissioning and configuration of the units may only be carried out by qualified personnel.This also applies to the maintenance, testing and repair, whereat the regulations of the DIN VDE 0701 series of standards (repair, modification and inspection of electrical appli-ances) must be followed.

RegulationsThe use of video and audio surveillance systems is, in general, strictly regulated.Inform yourself about the currently valid laws and regulations regarding data, worker and environmental protection before using the units and ensure compliance with them.

System ComponentsOnly use internal components that have been tested and approved by Dallmeier.Inappropriate internal components may cause malfunctions, damages and data loss and may result in the loss of warranty.

ModificationsDo not make any modifications to the hardware or software that have not been tested and approved by Dallmeier.Inappropriate modifications may cause malfunctions, damages and data loss and may result in the loss of warranty.

DocumentationThe product documentation contains several documents which are included in the scope of delivery in a printed form and/or on a digital medium.Read the documents included in the delivery carefully and thoroughly.Always follow the contained instructions, notes and warnings and observe the technical specifications in the product data sheet.Keep all documents in legible condition and in a suitable location for future reference.Regularly check the website www.dallmeier.com for the latest updates on product docu-mentation.

Condensation WaterIf the units are brought from a cold to a warm environment, resulting condensation water may cause malfunctions and damages.In this case, wait (up to 8 hours) until the units have reached room temperature before commissioning.

2 Safety Instructions

SMAVIA Appliance

www.dallmeier.com 7

Earthing & Equipotential BondingFor the safety of persons (protection against dangerous contact voltages) and devices (protection against overvoltages) and the immunity of information and communication technology equipment to electromagnetic interferences (EMI), all protective measures, which are specified by the currently valid DIN, VDE and ISO standards and which provide for a standard-compliant earthing and a correct equipotential bonding of electrical and electronic devices, are mandatory and must be fulfilled by all means.

Lightning StormsTo avoid damage to the units by electrical surge during lightning storms, unplug the units from the mains power supply (pull out the power plug).This is also recommended, when the units have been unused for a long period of time.

Operating ConditionsUnfavorable operating conditions can shorten the life of the units and may cause malfunc-tions, damages and data loss and may result in the loss of warranty.Observe the specifications given in the technical data, the operating condition require-ments and the maintenance instructions.

ShocksShocks can cause malfunctions and damages.The units may not be moved while in operation.

Foreign BodiesIf objects or liquids get into the units, immediately disconnect them from the power supply (pull out the power plug).Contact the sales partner responsible for your area.

Burnt SmellIf you notice burnt smell or formation of smoke from the units, immediately disconnect them from the power supply (pull out the power plug).Contact the sales partner responsible for your area.

OpeningThe housings of the units may only be opened by qualified personnel for commissioning, inspection, maintenance and repair.

DisposalDo not dispose waste electrical and electronic equipment into the household trash.Disconnect the units from the power supply.Remove all connected devices.Return the units to your respective sales partner.

SMAVIA Appliance

www.dallmeier.com 8

3 General Notes

3.1 Appropriate UseThe appliance IPS 10 000 combines the proven and extended VideoIP software SMAVIA Recording Server with a reliable and high-performance server hardware.Best matched components ensure high storage speed and thus allow the recording of up to 100 HD video channels in real-time. The integrated RAID 6 storage system already provides a high storage capacity and can be expanded by a external SMAVIA Enterprise JBOD extension. Thereby this appliance is the optimal recording system for large video installations in stadiums, shopping malls, casinos or convention centers.

3.2 WarrantyThe terms and conditions valid at the signing of the contract shall apply.

3.3 Approvals/CertificationsAt the time of the generation of this document, the device was certified as follows:

IPS 10 000:• CE• FCC• ACA• UL• tested according to DIN 50130-4

SMAVIA Enterprise JBOD:• CE

Notice possible updates on www.dallmeier.com.

SMAVIA Appliance

www.dallmeier.com 9

4.1 Required ComponentsThe following components are required, in order to be able to use an IPS 10 000 with a SMAVIA Enterprise JBOD extension.

• IPS 10 000 Appliance with mounted MegaRAID Controller Board (see below)• SMAVIA Enterprise JBOD extension• At least six SATA HDDs of identical construction for mounting in the JBOD extension• Cable (SFF-8088 auf SFF-8088) to link the devices

4.2 RequirementsIn order to be able to use an IPS 10 000 with a SMAVIA Enterprise JBOD extension, both devices have to meet certain requirements:

• Only SATA HDDs are supported, when using both devices together.• The storage capacities of the HDDs used in the IPS 10 000 and the JBOD extension

can be different, but have to be same in the respective device.• MegaRAID Controller Board including Battery Backup Unit (BBU-08) has to be

mounted in the IPS 10 000

The RAID Controller Board in the IPS 10 000 is only available ex factory.The Battery Backup Unit serves the power supply of the cache in case of a short term power cut, and has to be switched after 36 months. New BBU-08 are available as option.

• A viable license for the usage of the software interface for connecting the SMAVIA Enterprise JBOD extension is needed on side of the recorder.

4 Installation

SMAVIA Appliance

www.dallmeier.com 10

4.3 Installation Shut down the IPS 10 000 appliance. Mount six SATA HHDs of identical construction in the JBOD extension (see the “SMAVIA Enterprise Storage JBOD Commissioning” documentation). Connect the IPS 10 000 and the JBOD extension with the SFF-8088 cable, using the MegaRAID Controller Board as interface.

The lower of the two SF-8088 interfaces on the JBOD system functions as input, the upper interface as output. The interfaces are not labeled on the device.

In

Out

Connect the JBOD extension to the power supply system. Use both power supply units to guarantee failure safety. Start the JBOD extension. Start the IPS 10 000 appliance.

SMAVIA Appliance

www.dallmeier.com 11

5 Configuration

After connecting and operating the devices, the appliance can be configured locally (mon-itor) or on the Ethernet (workstation with NetConfig3).

Note the documentation “Commissioning”. It contains detailed instructions on mounting, connection assignment and commissioning of the device.

5.1 Local LoginIn order to access the configuration interface of the appliance, proceed as follows:

Move the mouse pointer to the bottom of the screen.

The Login button is displayed.

Click Login.

The virtual keyboard is displayed.

Enter the password. Confirm with OK.

The configuration interface is displayed.

SMAVIA Appliance

www.dallmeier.com 12

Make the required settings (see below). Click Close in order to exit the configuration interface.

5.2 Remote LoginA remote login to an appliance in a network is possible via the PService3 software appli-cation.

Note the documentation “Operation” of the PService3 application. Start PService3. Scan the network. Select the required appliance. Open the context menu with a right-click. Click NetConfig3.

The connection is established.

SMAVIA Appliance

www.dallmeier.com 13

Login Mode User Login Enter User Name and Password. Click Login.

Login Mode Group Login Enter the Password. Click Login.

The configuration interface is displayed.

Make the required settings (see below). Click Close in order to exit the configuration interface.

SMAVIA Appliance

www.dallmeier.com 14

5.3 JBOD-StorageConfiguration Open the JBOD-Storage configuration under Interfaces > JBOD Management.

The respective HDDs with their different features of performance and current state are displayed.

Choose RAID 6. Confirm with OK.

The configuration of the SMAVIA Enterprise JBOD extension is now complete.

5.4 HDD ManagementFor monitoring the total storage capacity of the system, the internal Hard Disks Manage-ment can be checked.

Open Recording > HDD Management.

The capacity of the system in gigabyte is shown.

1Introduction1.1Validity1.2Documents1.3Typographical Conventions

2Safety Instructions3General Notes3.1Appropriate Use3.2Warranty3.3Approvals/Certifications

4Installation4.1Required Components4.2Requirements4.3Installation

5Configuration5.1Local Login5.2Remote Login5.3JBOD-Storage Configuration5.4HDD Management