Applications, that precisely do yours

Machine Tool Line-up

Applications, that precisely do yours

01 UGINTMachine Tool Line-up

Prologue

Great Productivity,by Our Vertical Tapping Centers

02

UGINT Series with innovative design and productivityA new leader in vertical tapping machine It would be the best choice for mass producing automobile parts, IT parts and mold process! We are the future vertical machining center with cutting-edge technologies and compact size

Automobile & Module

GeneralElectric parts

ITIndustry

Product Mapping

UT280

HSK BT /BBT 30 BT 30/BT 40

MAX-G300MAX-D320

SC-N300

UT360D

UT380

UT420

UM450

PT400S

XT3000SXT6000S/2SP

Work

Specia

ltyM

ach

inin

g C

apability

Stroke

03

02 MachineBasic

Long last Precision with high-stability and Consistency

Our spindles that are all direct driven perform a wide range of machining process along with betterment of the main axis rigidity that prevents heat distortions. The maximum round per min of our spindles is 24,000 rpm.

We have adapted the rigid tapping as a standard feature for all products, which should be able to maximize customers’ productivity with “inch perfect” accurate/prompt tap processing. In addition, the precision of our rigid tap process has been proved in accordance with all relevant ISO certificates and also even tapping tool life can be extended. Furthermore the processing time has been saved on the reverse rotation with triple speed up return.

(Mitsubishi CNC command: G84Z-10.R3.F1.0.S2000,R1,S6000)

We also apply big plus tooling system (BBT#30) that is the dual contact (the surface of spindles tool tapers) to hold tools to reduce vibration and process rigid machining with high-speed. We have developed to maximize the diameter of tool contact spot in order to improve the accuracy repeatability of automatic tool changer and prevent Z-axis from distortions. This BBT system also increase tool life time as well

Rigid Tapping

Spindle

Spindle TaperBefore Clamping After Clamping

Clamping

Non Contact Contact

Axial Movement is Important for Face Contact Applying spindle fixing 2 faces (PT400S Standard)

The system uses main axis fixing 2 faces (BBT #30) which contact main axis and taper cross-sections to reduce vibration and realize high-speed processing with high precision.

ATC repetitive precision is improved by increasing standard diameter and extends tool life by protecting Z-axis from deformation during high-speed operation.

Technology

04

Servo Motor

High raised Column

Guide Way

Ball Screw

Rapid transfer speed of each axis can reach out to for reach up to 60m/min in maximum that also can reduce a great amount of non-cutting time with 1G of acceleration and deceleration. (the range of rapid traverse for each axis is various and depending on machines)

An optional high raised column is also available, which can level up to 150mm height at Z-axis in order for customers to be able to get more machining space. (Except for DUAL TABLE machine : UT360D)

LM Guide with excellent response has been equipped to minimize noise during traverse of axes and this LM Guide is also another great factor to reduce non-cutting time. In addition, our guide way system maintains to keep machines in high-precision even for long-term usage and minimize slide side abrasion and stick slip that general guide way easily gets

Our Ball screws have been developed to minimize heat distortions and remove backlash with 4 column preloaded angular thrust bearings from both sides. (No. of preloaded angular thrust bearings: X 4ea / Y 4ea / Z 5ea) Moreover Ball screws on our machines have been directly connected with individual servo motors to allow machines to attain the high-precise axes traverse.

High-speed axes traverseOur rapid traverse for each axis has been accomplished up to 60m/min in maximum and 1G of acceleration and deceleration has been also added to reduce a great amount of non-cutting time, which make customer’s productivity by a lot than any other vertical machining center

the most advanced mechanism of high-speed technology

05

High-speed tool changer being driven by enhanced technologies

Basically the standard automatic tool changer (ATC) is turret type with 14 tool magazines. Optional features of it are turret type with 20 tool magazines, twin arm type with 20 and 24 tool magazines. Specially, in case of twin arm type, the tool changing time are at the speed of 1.1sec. for T-T (tool to tool) and 2.0 sec. for C-C (chip to chip)

Servo Motor ATCServo Motor ATC is recently “Must have item” for the maximum productivity.It would be the best choice to have servo motor ATC when a machining process requires various tools and multiple tool changing.

ATC & Magazine(Optional features are depending on machines)

14EA [20EA] {20, 24EA}BT303kg

RANDOM1.2sec {1.1sec}2.1sec {2.0sec}

UT38014EA {20EA}

BT303kg


UT28014EA [20EA] {20, 24EA}

BBT303kg


PT400S14EA [20EA] {20, 24EA}

BT30 [BT40]3kg {2.8kg}RANDOM

1.2sec {1.1sec}2.1sec {2.0sec}

UT420 / UM45014EA {20, 24EA}

BT303kg


UT360DITEMNo. of ToolsTool ShankMax. Tool WeightTool Selection MethodTool Change Time

T-T

C-C

{ } : Twin Arm Type

Twin Arm TypeArmless Type

[ ] : Option

03 PeripheralDevice

Technology

06

Table

Dual Table

Automatic Oil Lubricator

Optimized high-performance features

We have various sizes of tables throughout all product line and also they have perfect side way structure to block chips and cutting oil for all the guide surfaces.

UT360D has dual table system as a standard. Particularly the rotatable table adopts Rack & Pinion system, worked by hydraulic mechanism and is designed to simply determine location through location pin.

Automatic Oil LubricatorAutomatic lubrication is provided to the linear guide ways and ball screws. Lubrication oil is delivered by metered piston distributors, which precisely control the volume of oil. A Low-level alarm prevents the machine from being restarting preventing possible damage

Controller

CNC Application

MITSUBISHI CNC M70/M700 Series

MITSUBISHI-70VB

MITSUBISHI-70VA

MITSUBISHI-720VS

MITSUBISHI-730VS

FANUC-0iMD (α packge-X,Y,Z)

FANUC-0iMD/Hybrid pack (α -Z / β-X,Y)

SIEMENS 828D

● ● ● ● ●

○ ○ ○ ○ ○

○ ○ ○ ○ ○

○ ○ ○ ○ ○

○ ○ ○ ○ ○

○ ○ ○ ○ ○

○ ○ ○ ○ ○

UT UT UT UT UM 280 380 360D 420 450

CNCController

MITSUBISHI-70VB

MITSUBISHI-70VA

MITSUBISHI-720VS

MITSUBISHI-730VS

FANUC-0iMD (α packge-X,Y,Z)

FANUC-0iMD/Hybrid pack (α -Z / β-X,Y)

SIEMENS 828D

X ○ ○ X X

○ ● ● ● ●(1Sp.)

● ○ ○ ○ ●(2Sp.)

○ X X X X

X X X X X

X X X X X

○ X X X X

PT MAX MAX XT XT 400S G300 320/D320 3000 6000

CNCController

FANUC 0 i

SIEMENS 828D

07

UT380The reformed best-selling machine out of its class by our exquisite innovationSpecification

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)

Rapid Traverse (X/Y/Z)

Tool Storage

Mitsubishi : M70-Vb [VA/720Vs/F0iMD/s828D]

620 X 390

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000]

520/380/350 {480}

60/60/60

14 [20] {20/24}

◆ Products : HDD Base & Arm, iPhone Case & Buttons, small automotive parts etc.

UT280The machine that gives you freedom from cramped conditionsSpecification

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage


540 X 400

3.7/5.5 [2.2/3.7]

12,000 [15,000/24,000(720Vs)]

360/280/250 {380}

60/60/60

14 {20}

◆ Products : Smart Phone Case & Buttons, HDD Arm etc.

[ ] : Option, { } : Twin Arm Type


540×400 2.1sec{2.0sec}

14EA12,000[15,000][24,000]

{20EA} 150kgs[200kgs]

X : 360Y : 280

Z : 250{380}

620×390 2.1(2.3)sec{2.0sec}

14EA[20EA]

12,000[15,000][24,000]

{20EA}{24EA}

150kgs[200kgs]

X : 520Y : 380

Z : 350{480}

08

UM 450The hybrid manufacturing solution with high-speed and heavy duty cuttingSpecification (BT40)

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage


800 X 460

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000/24,000(720Vs)]

700/450/350 {480}

50/50/48

14 [20] {20/24}

◆ Products : Automotive/motor cycle parts, power generator etc.

UT420Great flexible manufacturing equipment with high-speed and rigidity of BT40 machining centersSpecification (BT40)

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage


800 X 420

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000/24,000(720Vs)]

700/420/350 {480}

50/50/50

14 [20] {20/24}

◆ Products : small/mid-sized automotive parts, cell phone case etc.



800×420 2.1sec[2.3sec]{2.2sec}

14EA[20EA]

12,000[15,000][24,000]

{20EA}{24EA}

200kgs[250kgs]

X : 700Y : 420

Z : 350{480}

800×460 2.1sec[2.3sec]{2.0sec}

14EA[20EA]

12,000[15,000][24,000]

{20EA}{24EA}

200kgs[250kgs]

X : 700Y : 450

Z : 350{480}

09

UT360DThe best dual table machining spec compared to its price categories Specification

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage


2-650 X 400

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000/24,000(720Vs)]

520/360/350 {480}

48/48/60

14 {20/24}

◆ Products : Over mid-sized automotive and aircraft parts etc.

PT 400SThe 1st choice from the world class IT companies, literally the best hyper-speed performerSpecification

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage

Mitsubishi : M720Vs [s828D]

620 X 390

2.2/3.7

24,000 [20,000 (s828D)]

520/400/350 {480}

60/60/60

14 [20] {20/24}

◆ Products : IT parts, small automotive parts, exquisite cosmetic processing etc.



620×390 2.1sec[2.3sec]{2.0sec}

14EA[20EA]

24,000[20,000]

{20EA}{24EA}

150kgs[200kgs]

X : 520Y : 400

Z : 350{480}

2-650×400 2.1sec{1.8sec}

14EA12,000[15,000][24,000]

{20EA}{24EA}

2x250 kgs[2x300 kgs]

X : 520Y : 360

Z : 350{480}

10

Distinctions - UT/PTSeries

Spindle10Krpm 12Krpm 15Krpm 16Krpm 20Krpm 24Krpm

√std. √opt. √opt.

√std. √opt.




√opt. √std.

√ std. √ opt.

√ std. √ opt.

Model

UT280

UT380

UGINT UT420

UM450

UT360D

PT400S

Acompany R***series

Bcompany T***series

Rapid TraverseModel Rapid (X/Y/Z)m/min

UGINT PT400S 60/60/60

Acompany α-**** √std. 48/48/48

Bcompany T*-**** 50/50/50

When total tool weight is 8kgs with Servo motor ATC

Model Turret Twin-Arm 14magazines 20magazines

BT/BBT30 T-T C-C T-T C-C

UT280/380

UT360D/420 1.2sec 2.1sec 1.1sec 2.0sec

UM450

PT400S 1.1sec 2.1sec 1.1sec 2.0sec

UGINT 1.78sec

Acompany 2.10sec

Bcompany 2.40sec

the farthest tool changing

ATC & Magazine

•Turndia. :1,100mm(43.3″)

•JigHeight:300mm(11.8″)

•Tablesize:650×400(25.6″x15.7″)-1side

•Maxload :250[300]kgs(551[661]lbs)–1side

Dual Table - UT360D

“1.78 sec”

300mm

1,100mm

Single Table

Weight Standard Option Allowance (kgs/lbs) (kgs/lbs)

UT280/380PT400S 150/331 200/441

UT420/UM450 200/441 250/551

11

•��The�world�2nd�earliest�developer�of�direct�type�24,000rpm�spindle

•��A�wide�range�of�speed�for�spindle�(12K,�15,�20K,�24K)

•��Adopting�Ceramic�ball�bearings�with�groundbreaking�long�life

•��All�spindles�are�made�in�house�(no�out-sourcing�manufacturing)�to�keep�the�best�quality

MAX SeriesThe official manufacturing solution of the world No.#1 IT company (Micro Milling Center)Specification

CNC Sysetm

Table Size (mm)

Spindle Spec.

Spindle Speed (rpm)

Spindle Power (kW)

Travel (X/Y/Z/W) (mm)

Rapid Traverse (X/Y/Z/W)

Tool Storage

MAX-G300

Mitsubishi : M70-VA [720Vs]

820 X 350

hsK / 4 [2] EA / Pitch 240mm

40,000 [60,000]

3.3 [2.2]

400/300/230/15

60/60/48/15

4EA/spindle (AtC Option)

MAX-320


820 X 350

Collet / 2 [4] EA / Pitch 300mm

30,000 [40,000 / 60,000]

2.4 [3.3 / 2.2]

1,300/320/200/15

48/48/48/15


MAX-D320


820 X 350 (2 table)

Collet / 4 [2] EA / Pitch 200mm

30,000 [40,000 / 60,000]

2.4 [3.3 / 2.2]

1,300/(320 X 2)/200/15

48/(48 X 2)/48/15


◆ Products : Tablet PC, Smart phone, Notebook

and other IT parts etc.

* The pitch distance between Spindles can be changeable

upon request as an option

* ATC with 4~6 tool magazines can be available as an

option.

820×350MAX G300

840×360[2 Table]

MAX 320MAX D320

-

-

4EA

4EA

40000 × 4EA

30,000

150 kgs

150 kgs

X : 400Y : 300Z : 230

X : 1,300Y : 320Z : 200W : 15

12

The great innovation to cut tool setting time with just one-touch setting from the controller

Always one better choice from uGiNt (W-axes fully loaded for the best productivity and versatilities)

High-frequency SpindleModel 30Krpm 40Krpm 60Krpm

MAX-G300 √opt. √std. √opt.

MAX-320 √std. √opt. √opt.

MAX-D320 √std. √opt. √opt.

Opt.:Air-Spindle

ATC Automatic Loading System

Smart tool pot - ATC with 4~6 tool magazines can be available as an option.

(SingleTableOnly)

Manual tool setting:Manual tool setting time is all different in infinite variety by users’ skill

ZeropointoffsetManualToolSetting ToolsettingwithW-axes

Zeropointoffset

W1 W2 W3 W4

Distinctions - MAXSeries

13

• High-frequency spindles with hyper-speed with ceramic ball bearings

• Perfect optimized machining solution for IT parts, plastic injection

mold, glass fibers and even metal cutting (Opt. : Air Spindle)

• Hyper-precise multiple head stocks and spindles bring the max.

Productivity (MAX-G300 : 4SP[Opt. 2SP] (MAX-320 : 2SP, MAX-D320 : 4SP)

XTSeriesUnique work piece vs. Unique machining solution with custom-made mechanical designSpecification XT3000S XT6000S/2SP

CNC Sysetm

Table Size (mm)

Spindle Power (kW)

Spindle Speed (rpm)

Travel (X/Y/Z) (mm)


Tool Storage


3,300X460(1650X460-2)

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000/24,000]

3,000/420/350

24/48/50

14

Mitsubishi : M70-VA(1sp.) M720Vs(2sp.)

6,600X460(1650X460-4)

3.7/5.5 [2.2/3.7] [5.5/7.5 : 12K rpm]

12,000 [15,000/24,000]

6000/420/350

36/48/50

14

◆ Products : LED, LCD TV Panels/frames and base plate etc.

XT3000

3,300×4502-1,650x460

6,600×4604-1,650x460

XT3000S

XT6000S/2SP

2.1

2.1

14EA

14EA

12,000[15,000][24,000]

12,000[15,000][24,000]

600 kgs

1,200 kgs

X : 3,000Y : 420Z : 350

X : 6,000Y : 420Z : 350

14

14EA

BT30

3kg

RANDOM

1.2sec

2.1sec

XT6000S/2SP14EA

BT30

3kg

RANDOM

1.2sec

2.1sec

XT3000SITEM

No. of ToolsTool ShankMax. Tool WeightTool Selection MethodTool Change Time

T-T

C-C

[ ] : Option ATC & Magazine

Table Linear Scale (XT6000S/2SP)

Colum Moving

XT3000S -3,200×460mm and XT6000S -6,600×460mm have a wide table of work area, which will make users allow having the best use of maximum work area all among its same class of equipment.

The precision of XT6000S/2SP has been upgraded by applying X axis Linear Scale. This linear scale system can control the machining accuracy within 0.5㎛ of X-axis regardless sizes of wok pieces. (XT3000S : Ball screw)

Linear Motor (XT6000S Series)Linear Motor has a low fever, without rigid drop and backlash, and can accurately perform position determination and interpolation, contour control in the high speed feedrate. (XT3000S : Ball screw)

We adapt column moving design to make XT series handle heavy weight work pieces great and stay with high-precise machining while machining.

Basic Structure

Moving Control Panel

XT6000S/2SP has been increased the precision by applying X axis Linear Motor, and also advanced work capability and productivity with two of Colum Moving Type spindle.

XT6000S/2SP

Distinctions - XTSeries

15

Advanced new standard for MITsubIsHI CNC

MITSUBISHI CNC M70/M700 Series

04 ControllerEasy to Operate

Technology

• Increasing process and reducing tack time

- 0.1um for minimum input unit and 1nm for interpolation unit to realize highly smooth mechanical processing - Upgrading calculation speed due to high-speed PLC engine to reduce cycle time

• Fresh and advanced operability reducing setup time

- Popups, operation, program and alarm guidance with no screen layer - Implementing ‘NAVI MILL’ and ‘NAVI LATHE’ for simple programming

• Compact size

- Implementing 60mm of compact design integrating the screen and CNC controller

16

Programming system for creating CNC programs easily.

Existing backlash calibration due to backlash from elastic deformation from ball screws causes excessive calibration and abrasion.

In the progressive backlash, the protrusion is effectively reduced by gradually changing calibration values to realize highly precise processes.

Users select a process on the screen and input data to automatically write programs for each process.

Tool paths are visualized as graphics if users register tool and cutting conditions in advance.

Automatic Determination in Cutting ConditionsThe system automatically determines cutting conditions for each process from cutting condition

files or pre-registered tool files.

Customizing processing programsMacro programs write the processing program and it is possible to add orders among processes in the edit screen and the manufacturer may customize macros for each process.

Calibrating Location-dependent progressive backlash

Simplified AutomaticProgramming System (NAVI MILL)

NC Monitor / NC Explorer (Ethernet)

The device may directly search for process programs from inserted CF card in the slot or HDD (M700). Also, it is possible to edit the programs directly from the device.

It is possible to call subprograms from the processing program in the memory card or HDD and there is no limit on program formats.

Data Server Operation

CF Card

M700Series

M70SeriesEthernet

17

Displaying the same screen on theNC display with the PCIf needed, it is possible to check and configure data through the HMI with the same standard screen by connecting to NC controlling unit.

It is possible to easily transfer processing programs and NC data like variables and parameters by connecting NC and host PC through the Ethernet.

Other Controllers

FANuC 0i-MD sIEMENs 828DSiemens 828D control system carries 6 numerical controls that can certainly measure circuit and it has been perfectly optimized to drive vertical/horizontal milling and machining centers. Especially the newly-developed contouring control can also run applications for tool and mold making better than any other NC manufacturer.

< Operating convenience based on intuitive grasp >

Intuitive operating Siemens NC includes as followings;

* CNC Rotary table(C-axis) that can process 2 stations* Reversible CNC clamping device (A-axis) that can do

milling and hole-machining on cylindrical work pieces* CNC Gantry axis (for Gantry operation)* Tilting free axis or rotary table that can do milling and

hole-machining on surfaces of rotating work pieces* CNC-Controlled tool changer

Ultra-Compact CNC with Simplified Cables, High-Reliability

The most recent 0i CNC is proudly presented with the most powerful integrated system by easier control to coincide various customers’ needs

0i CNC series are designed to fit literally all work processing application in aspect of milling, turning or even grinding operations. Especially the CNC for milling operation can even drive 5 individual axes (including 4 axes concurrent control) and control up to 2 spindle motors at the same time.

• Spindle Control with Servo Motor

• Tool Management Function

• Unexpected Disturbance Torque Detection Function

• Composite Control

Enriched CNC Functions

Fast Data Server

RJ 45 Ethernet

Enabled for Communication

USB 2.0

Compact Flash Card

18

spindle Motor Power & Torque

MITsubIsHI

MITsubIsHI FANuC 0i-MD

sIEMENs 828D

Power (kW) Torque (N.m) Power (kW)

23.6N.m (15min)

3.7kW (15min)

14N.m (Cont.)

2.2kW (Cont.)

1,500 15,000

2.36

14

23.6

3.7

2.2

1.4

Torque (N.m)Power (kW)

47.7N.m (15min)

7.5kW (15min)

35N.m (Cont.)

5.5kW (Cont.)

1,500 12,000

5.97

35

47.7

7.5

5.5

4.38

Torque (N.m)

Power (kW)

3.7kW (15min)

2.2kW (Cont.)

1,500

1,700

2,000 3,000 24,000

1.47

17.7

12.4

7

23.6

3.7

2.2

0.88

Torque (N.m)

23.6N.m (15min)

12.4N.m (Cont.)

Power (kW) Torque (N.m)Power (kW) Torque (N.m)

14 45

21

4

0 3,000 20,000

45N.m (15min)

21N.m (Cont.)

14kW (15min)2.2kW (15min)

1.5kW (15min)

14 45

21

4

0 3,000 15,000

4.1kW (Cont.)

Power (kW) Torque (N.m)

7

4.7


0

2.2

1.5

3,000 15,000

7N.m (15min)

2.2kW (15min)

4.7N.m (Cont.)

1.5kW (Cont.)


7N.m (15min)

4.7N.m (Cont.)


23.6N.m (15min)

3.7kW (15min)

14N.m (Cont.)

2.2kW (Cont.)

1,500 15,000

2.36

14

23.6

3.7

2.2

1.4


47.7N.m (15min)

7.5kW (15min)

35N.m (Cont.)

5.5kW (Cont.)

1,500 12,000

5.97

35

47.7

7.5

5.5

4.38

Torque (N.m)

Power (kW)

3.7kW (15min)

2.2kW (Cont.)

1,500

1,700

2,000 3,000 24,000

1.47

17.7

12.4

7

23.6

3.7

2.2

0.88

Torque (N.m)

23.6N.m (15min)

12.4N.m (Cont.)


14 45

21

4

0 3,000 20,000

45N.m (15min)

21N.m (Cont.)


1.5kW (15min)

14 45

21

4

0 3,000 15,000

4.1kW (Cont.)


7

4.7


0

2.2

1.5

3,000 15,000

7N.m (15min)

2.2kW (15min)

4.7N.m (Cont.)

1.5kW (Cont.)


7N.m (15min)

4.7N.m (Cont.)


23.6N.m (15min)

3.7kW (15min)

14N.m (Cont.)

2.2kW (Cont.)

1,500 15,000

2.36

14

23.6

3.7

2.2

1.4


47.7N.m (15min)

7.5kW (15min)

35N.m (Cont.)

5.5kW (Cont.)

1,500 12,000

5.97

35

47.7

7.5

5.5

4.38

Torque (N.m)

Power (kW)

3.7kW (15min)

2.2kW (Cont.)

1,500

1,700

2,000 3,000 24,000

1.47

17.7

12.4

7

23.6

3.7

2.2

0.88

Torque (N.m)

23.6N.m (15min)

12.4N.m (Cont.)


14 45

21

4

0 3,000 20,000

45N.m (15min)

21N.m (Cont.)


1.5kW (15min)

14 45

21

4

0 3,000 15,000

4.1kW (Cont.)


7

4.7


0

2.2

1.5

3,000 15,000

7N.m (15min)

2.2kW (15min)

4.7N.m (Cont.)

1.5kW (Cont.)


7N.m (15min)

4.7N.m (Cont.)


23.6N.m (15min)

3.7kW (15min)

14N.m (Cont.)

2.2kW (Cont.)

1,500 15,000

2.36

14

23.6

3.7

2.2

1.4


47.7N.m (15min)

7.5kW (15min)

35N.m (Cont.)

5.5kW (Cont.)

1,500 12,000

5.97

35

47.7

7.5

5.5

4.38

Torque (N.m)

Power (kW)

3.7kW (15min)

2.2kW (Cont.)

1,500

1,700

2,000 3,000 24,000

1.47

17.7

12.4

7

23.6

3.7

2.2

0.88

Torque (N.m)

23.6N.m (15min)

12.4N.m (Cont.)


14 45

21

4

0 3,000 20,000

45N.m (15min)

21N.m (Cont.)


1.5kW (15min)

14 45

21

4

0 3,000 15,000

4.1kW (Cont.)


7

4.7


0

2.2

1.5

3,000 15,000

7N.m (15min)

2.2kW (15min)

4.7N.m (Cont.)

1.5kW (Cont.)


7N.m (15min)

4.7N.m (Cont.)


23.6N.m (15min)

3.7kW (15min)

14N.m (Cont.)

2.2kW (Cont.)

1,500 15,000

2.36

14

23.6

3.7

2.2

1.4


47.7N.m (15min)

7.5kW (15min)

35N.m (Cont.)

5.5kW (Cont.)

1,500 12,000

5.97

35

47.7

7.5

5.5

4.38

Torque (N.m)

Power (kW)

3.7kW (15min)

2.2kW (Cont.)

1,500

1,700

2,000 3,000 24,000

1.47

17.7

12.4

7

23.6

3.7

2.2

0.88

Torque (N.m)

23.6N.m (15min)

12.4N.m (Cont.)


14 45

21

4

0 3,000 20,000

45N.m (15min)

21N.m (Cont.)


1.5kW (15min)

14 45

21

4

0 3,000 15,000

4.1kW (Cont.)


7

4.7


0

2.2

1.5

3,000 15,000

7N.m (15min)

2.2kW (15min)

4.7N.m (Cont.)

1.5kW (Cont.)


7N.m (15min)

4.7N.m (Cont.)

M-12,000rpm

F-12,000rpm

S-12,000rpm

M-12,000rpm

F-15,000rpm

S-15,000rpm

M-15,000rpm

M-24,000rpm

S-20,000rpm

19

Optional functions for customers’ needs

05 OptionalFunctions

Touch Sensor Tool

Mist Collector

Door Safety Sensor

Oil Skimmer

It automatically and immediately sets up basic coordinates by the signal between touch sensor and work pieces

An environmental equipment to collect micro oil mist automatically in machining area and prevent pollution in work area and improve machines’ durability

An optional safety door with automatic laser sensor

A cost-effective device to collect lubricating oil from coolant mixture and to keep coolant long last

An optional work table that can operate machining with 4 or 5 axes

A confirmation device to let users know if work pieces reaches in good condition on the table by air pressure

An optional connector for hydraulic supply in work tables

*4 to 10 ports of connections are available

TLM (Touch & Laser)

Linear Scale (embedding Type)

Rotary Table

Air Gap Sensor

Hyd. Supply Device

It gives users hyper-precise positioning accuracy consistently and also can interpolate heat distortions to get work pieces more exquisitely done

Spindle Thru CoolantIt would be the wise choice if work pieces are required such as deep hole drilling process. This option can reduce a great amount of heat from machining to have stable tolerance and make tool life extended.

Options for work environment and user safety

20

Tool length measuring device that can indicate automatically measured values of tool abrasion, off-set and even check if tools being broken

standard & Optional Features

Machine guidanceHWTM(Tool monitoring system)DNC softward (Cable 2m included)Interactive programTool ID ManagerHeat distortion compensation device for spindleSpindle warming-up functionMiscellanies

Adjusting tool and tool boxSpecial color (based on 2 colors)CAD&CAM softwardElectrical devices

3 color call light3 color call light & buzzerWork lightLight in electric cabinetDoor interlocks (front door)

MPG

3 axes MPG

Spindle load meter (LED type)

Spindle RPM meter (LED type)

Work counterTotal counterTool counter

Multi tool counter

Earth leakage breaker AVR(Auto Voltage Regulator)transformer (MITSUBISHI)transformer (FANUC)transformer (SIMENS) Flash memory card (USB Port is Std.)Auto Power Off deviceBack-up module for power failureMeasurement

Work safe campling confirmation deviceWork measuring deviceAutomatic work measuring device(Marposs/Renishaw etc.)Tool broken detector (Limit Switch Type)Linear scale (embedded in LM guide)Coolant level sensor (whe applying chip conv.)User's environment

Air conditionerdehumidifier Oil mist collectorDust collectorOil skimmer (when applying chip conv.)Fixture & Automation

Auto door

Automatic shutter (when applying automation process)Sub-control panelAir Gap Switch (For clamping fixture)

NC Rotary table interface

Control additional axis

Additional External M-code

Interface for automation machining process

Additioinal I/O (IN & OUT)

Hyd. supply device (Including vacuum)

Std. Hyd. Unit

Centric hyd. Supply device

Centric hyd. Supply device(Simple pattern)

Hyd. unit for fixture

S/W

12,000rpm(5.5/3.7kW) - MITSUBISHI15,000rpm(3.7/2.2kW) - MITSUBISHI24,000rpm(3.7/2.2kW) - MITSUBISHI12,000rpm(7.5/5.5kW) - FANUC12,000rpm(6.6/4.1kW) - SIEMENS15,000rpm(3.7/2.2kW) - SIEMENS20,000rpm(3.0/2.2kW) - SIEMENS30,000rpm(2.4kW) 40,000rpm(3.3kW) 60,000rpm(2.2kW) Spindle cooling systemCNC Upgrade

MITSUBISHI-70VBMITSUBISHI-70VAMITSUBISHI-720VSMITSUBISHI-730VSFANUC-0iMD (alpha packge-X,Y,Z)FANUC-0iMD/Hybrid pack (alpha -Z / Beta-X,Y)SIEMENS 828DATC

ATC extension

Tool shank type

STUD BOLT COLLET changing

Table / Column

APC

TAP TYPE TableT-SLOT TableNC Rotary Table

High raised Column

Coolant system

Std. Coolant system (Nozzle)Bed flushing coolantCTS prepped. (Rotray joint is NOT included)

Coolant Thru. Spindle

TOP COVER (Mandatory when CTS)Jet coolantGun coolantDual coolant systemAir gunSpindle Air blowTool measuring air blow (When TLM being selected)Special air blow (for Factory-Automation)CTS MQL device (MQL is NOT included)Coolant tankReverse CTS washing deviceSpindle taper washing deviceCoolant cooling device (a belly tank)Pwer coolant system (for Factory-Aumation)Chip disposal

Coolant tankInternal chip auger (Screw type)

Chip conveyor (Hinge/Scraper)

Special chip conveyor (DRUM FILTER)

Chip Box

Safety device

Total splash guard (Top Cover in NOT included)

Direct DriveDirect DriveDirect DriveDirect DriveDirect DriveDirect DriveDirect DriveHigh-frequencyHigh-frequencyHigh-frequency

14(Turret)20(Turret)14(Turret/Servo)20(Turret/Servo)20(Twin-arm)24(Twin-arm)4pots/per spindle6pots/per spindleBT30BBT30BT40HSK25Ø6 Collet type45°60°90°

ROTARY TURNFIXED TYPE

150mm300mm

20bar30bar70bar, 15ℓ70bar, 30ℓ

Side HingeRear HingeSide ScraperRear Scraper

Std. (180ℓ)Swingable (200ℓ)Swingable (270ℓ)Bulk size (330ℓ)Speical size

● ● ● ● ● X

○ ○ ○ ○ ○ X

○ ○ ○ ○ ○ ●

○ ○ ○ ○ ○ X

○ ○ ○ ○ ○ X

○ ○ ○ ○ ○ X

- - - - - ○

- - - - - -

- - - - - -

- - - - - -

- - - - - -

● ● ● ● ● X

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ X

○ ○ ○ ○ ○ X

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

X ○ X ○ ○ ○

○ ○ ○ ○ ○ ○

X ○ X ○ ○ ○

○ ○ ○ ○ ○ ○

X ○ ○ ○ ○ ○

X X X X X X

X X X X X X

● ● ● ● ● ○

○ ○ ○ ○ ○ ●

X X X ○ ○ X

X X X X X X

X X X X X X

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

X X X X X X

- - ● - - -

- - - - - -

○ ○ ● ○ ○ ○

● ● ○ ● ● ●

○ ○ ○ ○ ○ ○

○ ○ X ○ ○ ○

○ ○ X ○ ○ ○

● ● ● ● ● ●

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

X X X ※ ※ X

X X X ※ ※ X

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

※ ※ ※ ※ ※ ※

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

※ ※ ※ ※ ※ ※

● ● ● ● ● ●

UT UT UT UT UM PT 280 380 360D 420 450 400S

UT UT UT UT UM PT 280 380 360D 420 450 400S

Spindle

●Std.○Opt.※ConslutingrequiredXCannotapply–NotAvailable

Munsel NO.required

(Green/Red/Yellow)(Green/Red/Yellow)+buzzer

MITSUBISHIFANUCMITSUBISHIFANUCSIEMENSMITSUBISHIFANUCSIEMENSMITSUBISHIFANUCSIEMENSDigitalDigitalDigital6pcs9pcs

220V: 20kVA380V: 20kVA

TACOSMC

Touch typeLaser type

X/Y/Z axis

Cylinder typeHigh-speed type

SingleChannel1 add. axis2 add. axis8sets20sets

16pcs32pcs

45bar/30ℓ2x2(4ports)2x3(6ports)2x5(10ports)2x2(4ports)2x3(6ports)45bar70bar

❖ The specifications as above will only serve as a reference.

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

※ ※ ※ ※ ※ ※

● ● ● ● ● ●

※ ※ ※ ※ ※ ※

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

● ● ● ● ● ●

※ ※ ※ ※ ※ ※

● ● ● ● ● ●

● ● ● ● ● ●

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

※ ※ ※ ※ ※ ※

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

※ ※ ※ ※ ※ ※

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

- - ● - - -

- - ○ - - -

- - ○ - - -

- - ○ - - -

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○

21

standard & Optional Features

Machine guidanceHWTM(Tool monitoring system)DNC softward (Cable 2m included)Interactive programTool ID ManagerHeat distortion compensation device for spindleSpindle warming-up functionMiscellanies

Adjusting tool and tool boxSpecial color (based on 2 colors)CAD&CAM softwardElectrical devices

3 color call light3 color call light & buzzerWork lightLight in electric cabinetDoor interlocks (front door)

MPG

3 axes MPG

Spindle load meter (LED type)

Spindle RPM meter (LED type)

Work counterTotal counterTool counter

Multi tool counter

Earth leakage breaker AVR(Auto Voltage Regulator)transformer (MITSUBISHI)transformer (FANUC)transformer (SIMENS) Flash memory card (USB Port is Std.)Auto Power Off deviceBack-up module for power failureMeasurement

Work safe campling confirmation deviceWork measuring deviceAutomatic work measuring device(Marposs/Renishaw etc.)Tool broken detector (Limit Switch Type)Linear scale (embedded in LM guide)Coolant level sensor (whe applying chip conv.)User's environment

Air conditionerdehumidifier Oil mist collectorDust collectorOil skimmer (when applying chip conv.)Fixture & Automation

Auto door

Automatic shutter (when applying automation process)Sub-control panelAir Gap Switch (For clamping fixture)

NC Rotary table interface

Control additional axis

Additional External M-code

Interface for automation machining process

Additioinal I/O (IN & OUT)

Hyd. supply device (Including vacuum)

Std. Hyd. Unit

Central hyd. Supply device

Central hyd. Supply device(Simple pattern)

Hyd. unit for fixture

S/W

12,000rpm(5.5/3.7kW) - MITSUBISHI15,000rpm(3.7/2.2kW) - MITSUBISHI24,000rpm(3.7/2.2kW) - MITSUBISHI12,000rpm(7.5/5.5kW) - FANUC12,000rpm(6.6/4.1kW) - SIEMENS15,000rpm(3.7/2.2kW) - SIEMENS20,000rpm(3.0/2.2kW) - SIEMENS30,000rpm(2.4kW) Collet40,000rpm(3.3kW) HSK 2540,000rpm(2.4kW) Collet60,000rpm(2.2kW) ColletSpindle cooling systemCNC Upgrade

MITSUBISHI-70VBMITSUBISHI-70VAMITSUBISHI-720VSMITSUBISHI-730VSFANUC-0iMD (alpha packge-X,Y,Z)FANUC-0iMD/Hybrid pack (alpha -Z / Beta-X,Y)SIEMENS 828DATC

ATC extension

Tool shank type

STUD BOLT COLLET changing

Table / Column

APC

TAP TYPE TableT-SLOT TableNC Rotary TableHigh raised ColumnCoolant system

Std. Coolant system (Nozzle)Bed flushing coolantCTS prepped. (Rotray joint is NOT included)

Coolant Thru. Spindle

TOP COVER (Mandatory when CTS)Jet coolantGun coolantDual coolant systemAir gunSpindle Air blowTool measuring air blow (When TLM being selected)Special air blow (for Factory-Automation)CTS MQL device (MQL is NOT included)Coolant tankReverse CTS washing deviceSpindle taper washing deviceCoolant cooling device (a belly tank)Pwer coolant system (for Factory-Aumation)Chip disposal

Coolant tankInternal chip auger (Screw type)

Chip conveyor (Hinge/Scraper)

Special chip conveyor (DRUM FILTER)

Chip Box

Safety device

Total splash guard (Top Cover in NOT included)

Direct DriveDirect DriveDirect DriveDirect DriveDirect DriveDirect DriveDirect DriveHigh-frequencyHigh-frequencyHigh-frequencyHigh-frequency

14(Turret)20(Turret)14(Turret/Servo)20(Turret/Servo)20(Twin-arm)24(Twin-arm)4pots/per spindle6pots/per spindleBT30BBT30BT40HSK25Ø6 Collet type45°60°90°

ROTARY TURNFIXED TYPE

150mm

20bar30bar

160ℓ/ XT Series is special

Side HingeRear HingeSide ScraperRear Scraper

Std. (180ℓ)Swingable (200ℓ)Swingable (270ℓ)Bulk size (330ℓ)Speical size

- - ● ●

- - ○ ○

- - ○ ○

- - X X

- - X X

- - X X

- - - -

○ ● - -

● ○ - -

○ ○ - -

○ ○ - -

● ● - -

○ ○ ○ X

● ● ● ●(1Sp.)

○ ○ ○ ●(2Sp.)

X X X X

X X X X

X X X X

X X X X

X X ● ●

X X ○ ○

X X ○ ○

X X ○ ○

X X ○ ○

X X ○ ○

○ ○ X X

○ ○ X X

X X ● ●

X X ○ ○

X X X X

● ○ X X

○ ● X X

- - ● ●

- - ○ ○

- - X X

- - - -

○ ○ - -

○ ○ ● ●

● ● ○ ○

○ ○ ○ ○

※ ※ ○ ○

● ●(Air) ● ●

○ ○ ● ●

X X ○ ○

X X ○ ○

X X ○ ○

○ ○ X X

※ ※ ○ ○

※ ※ ○ ○

※ ※ ○ ○

● ● ○ ○

● ● ● ●

※ ※ ○ ○

※ ※ ○ ○

※ ※ ○ ○

● ※ ● ●

- - ○ ○

- - ○ ○

※ ※ ○ ○

※ ※ ○ ○

● ● ● ●

※ ※ ※ ※

○ - ○ ○

○ ○ X X

○ - ○ ○

○ ○ X X

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

※ ※ ※ ※

● ● ● ●

MAX MAX XT XT G300 D320 3000S 6000S/2SP

MAX MAX XT XT G300 D320 3000 6000

Spindle

●Std.○Opt.※ConslutingrequiredXCannotapply–NotAvailable

Munsel NO.required

(Green/Red/Yellow)(Green/Red/Yellow)+buzzer

MITSUBISHIFANUCMITSUBISHIFANUCSIEMENSMITSUBISHIFANUCSIEMENSMITSUBISHIFANUCSIEMENSDigitalDigitalDigital6pcs9pcs

220V: 20kVA380V: 20kVA

TACOSMC

Touch typeLaser type

X/Y/Z axis

Cylinder typeHigh-speed type

SingleChannel1 add. axis2 add. axis8sets20sets

16pcs32pcs

45bar/30ℓ2x2(4ports)2x3(6ports)2x5(10ports)2x2(4ports)2x3(6ports)45bar70bar100bar(vacumm only)❖ The specifications as above will only serve as a reference.

● ● ● ●

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

※ ※ ※ ※

● ● ● ●

※ ※ ※ ※

○ ○ ○ ○

● ● ● ●

○ ○ ○ ○

● ● ● ●

※ ※ ※ ※

● ● ○ ○

● ● ● ●

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ●

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○,(X-axis:●)

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ X X

○ ○ ○ ○

○ ○ ○ ○

※ ※ ※ ※

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

※ ※ ※ ※

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○

- - ○ ○

- ※ - -

- ※ - -

- ※ - -

- ※ - -

- ※ - -

○ - ○ ○

○ - ○ ○

○ ○ - -

22

External DimensionsExternal Dimensions

UT380PT400S

UT280

unit : mm

UT420

23

External Dimensions

MAXG300

unit : mm

UM450

UT360D

24

External Dimensionsunit : mm

MAXD320

XT3000S

XT6000S/2SP

25

540

400

8080

540

400

8080

540

400

8080

XT3000S

XT6000S/2SP

UT380 / PT400SUT280 UT420

UT360D

UM450

T-Slot

T-Slot

T-Slot Tap

Tool shink & Table Dimensions

unit : mm

• Footnote) Ø2.5mm for coolant thru. spindle is optional

BT30/BBT30 TOOL MAS403 P30T-1

26

MAX-G300/320/D320

T-Slot

specification

27

Table

ATC

Travel

Spindle

Controller

Machine

UT280 UT380 UT420

540×400

150

360

280

250{380}

150~400{150~530}

444

60/60/60

3.7/5.5 [2.2/3.7]

12,000[15,000/24,000]

35/1,500 [20.8/1,700]

Armless{Twin Arm}

14{20}

BT30 [BBT30]

Ø80{Ø80}

1.2{1.1}

2.1{2}

1,320×2,020

2,280

2,400

M70-VB [VA/720VS]

[F0i-MD/S828D]

620×390

150

520

380

350{480}

150~500{150~630}

444

60/60/60

3.7/5.5 [2.2/3.7] [5.5/7.5]

12,000 [15,000]

35/1,500 [20.8/1,700]

Armless{Twin Arm}

14(20){20(24)}

BT30 [BBT30]

Ø80{Ø80/(Ø65)}

1.2(1.3){1.1}

2.1(2.3){2}

1,720×2,093

2,388{2,632}

2,800

M70-VB [VA]

[F0i-MD/S828D]

800×420

200

700

420

350{480}

150~500{150~630}

484

50/50/50

3.7/5.5 [2.2/3.7] [BT40:5.5/7.5]

12,000[15,000/24,000]

35/1,500 [20.8/1,700]

Armless{Twin Arm}

14/(20){20}

BT30 [BBT30/BT40]

Ø80{Ø80}

1.2(1.3){1.1}

2.1(2.3){2}

2,100×2,575

2,468

3,500

M70-VB [VA/720VS]

[F0i-MD/S828D]

Size

Allowable

X-axis

Y-axis

Z-axis

Motor Power

Spindle Speed

Max. Torque/Rpm

ATC Type

Tool Storage

Tool Shank

Max. Tool dia.

Tool to tool time

Chip to chip time

Floor Space (L x W)

Height

Weight (std.M/C)

NC Unit

Spindle Nose to table top

Spindle Center to column)

Rapid traverse (X/Y/Z)

❖ RemarkMachine specifications and other features are subject to change without notice.㈜ 1. ATC : Standard - 14 Tools Armless Type , Option - 20 / 24 Tools Twin Arm Type

mm

kg.f

mm

mm

mm

mm

mm

m/min

kW

rpm

N.m/rpm

Armless

ea

-

mm

sec

sec

mm

mm

kg

-

ITEM


specification

28

Table

ATC

Travel

Spindle

Controller

Machine

UM450 PT400S UT360D

800×460

200

700

450

350{480}

150~500{150~630}

524

50/50/48

3.7/5.5 [2.2/3.7] [BT40:5.5/7.5]

12,000[15,000/24,000]

35/1,500

Armless{Twin Arm}

14/(20){20/24}

BT30 [BBT30/BT40]

Ø80{Ø80/(Ø65)}

1.2/(1.3){1.1}

2.1/(2.3){2}

2,090×2,644

2,383

3,800

M70-VB [VA/720VS]

[F0i-MD/S828D]

620×390

150

520

400

350{480}

150~500{150~630}

444

60/60/60

2.2/3.7

24,000 [20,000(S828D)]

23.5/1,700

Armless{Twin Arm}

14/(20){20/24}

BT,BBT30

Ø80{Ø80/(Ø65)}

1.2/(1.3){1.1}

2.1/(2.3){2}

1,600×2,120

2,388{2,632}

2,800

M720VS [S828D]

2-650×400

2×250

520

360

350{480}

200~550{200~680}

444

48/48/60

3.7/5.5 [2.2/3.7] [5.5/7.5]

12,000[15,000/24,000]

35/1,500 [20.8/1,700]

Armless{Twin Arm}

14{20/24}

BT30 [BBT30]

Ø80{Ø80/(Ø65)}

1.2{1.1}

2.1{1.8}

1,840×2879{2,015×3,220}

2,586{2,837}

4,500

M70-VB [VA/720VS]

[F0i-MD/S828D]

Size

Allowable

X-axis

Y-axis

Z-axis

Motor Power

Spindle Speed

Max. Torque/Rpm

ATC Type

Tool Storage

Tool Shank

Max. Tool dia.

Tool to tool time

Chip to chip time

Floor Space (L x W)

Height

Weight (std.M/C)

NC Unit


Spindle Center to column



mm

kg

mm

mm

mm

mm

mm

m/min

kW

rpm

N.m/rpm

Armless

ea

-

mm

sec

sec

mm

mm

kg

-

ITEM


specification

29

Table

ATC

Travel

Spindle

Controller

Machine

MAX G300

820×350

150

400

300

230

150~380

414

60/60/48

3.3

40,000×4EA [60,000]

7.8

-

4

HSK25 / Collet

-

-

-

1,600×1,950

1,988

2,800

M70-VA [720VS]

MAX 320

820×350

150

1,300

320

200

140~340

-

48/48/48/15

2.4

30,000×2EA [40,000/60,000]

7.64

-

6/3

Ø1~Ø10 Collet / HSK25

Ø1~Ø6

-

-

TBD

TBD

TBD

M70-VA [720VS]

MAX D320

820×350 (2 Table)

150

1,300

320×2

200

140~340

-

48/48/48/48/15

2.4

30,000×4EA [40,000/60,000]

7.64

-

6/3

Ø1~Ø10 Collet / HSK25

Ø1~Ø6

-

-

2,450×2,510

2,500

5,500

M70-VA [720VS]

Size

Allowable

X-axis

Y-axis

Z-axis

Motor Power

Spindle Speed

Max. Torque/Rpm

ATC Type

Tool Storage

Tool Shank

Max. Tool dia.

Tool to tool time

Chip to chip time

Floor Space (L x W)

Height

Weight (std.M/C)

NC Unit



Rapid traverse (X/Y1/Y2/Z/W)


mm

kg

mm

mm

mm

mm

mm

m/min

kW

rpm

N.m/rpm

Armless

ea

mm

sec

sec

mm

mm

kg

-

ITEM

[ ] : Option

specification

30

Table

ATC

Travel

Spindle

Controller

Machine

XT 3000S XT 6000S/2P

3,300×460 [1650×460-2]

600

3,000

420

350

250~600

484

24/48/50

3.7/5.5 [2.2/3.7] [5.5/7.5]

12,000[15,000/24,000]

35/1,500

Armless

14

BT30 [BBT30]

Ø80

1.2

2.1

4,500×2,500

2586

6,900

M70-VA [720VS]

6,600×460 [1650×460-4]

1200

6000

420

350

250~600

484

36/48/50

3.7/5.5 [2.2/3.7] [5.5/7.5]

12,000[15,000/24,000]

35/1,500

Armless

14

BT30 [BBT30]

Ø80

1.2

2.1

7,860×2,617

2,550

11,000

M70-VA (1Sp.) 720VS (2Sp.)

Size

Allowable

X-axis

Y-axis

Z-axis

Motor Power

Spindle Speed

Max. Torque/Rpm

ATC Type

Tool Storage

Tool Shank

Max. Tool dia.

Tool to tool time

Chip to chip time

Floor Space (L x W)

Height

Weight (std.M/C)

NC Unit





mm

kg

mm

mm

mm

mm

mm

m/min

kW

rpm

N.m/rpm

Armless

ea

mm

sec

sec

mm

mm

kg

-

ITEM

[ ] : Option

Mitsubishi M70/M700 Controller

Standard Accessories

● Splash guard [1set]

● Work light [1set]

● Door interlocks [1set]

● Bed flushing [1set]

● Spindle air blast [1set]

● Call light (3 colors) [1set]

● Automatic lubrication system [1set]

● Electric cabinet heat exchanger [1set]

● Coolant system (work coolant) [1set]

● Coolant tank [1set]

● 8.4”LCD-NC display [1set]

● Standard tool [1set]

● Mitsubishi controller manual [3sets]

● User manual [1set]

Easy to Operate

AxisControl

Interpolations

FeedFunction

ProgrammingFunction

Display

Interface

STMFunction

ToolFunction

Reference

SideFunctionofProgram

Simultaneous controllable axes

Least Command

Least input

Absolute

Inch / Metric conversion

Positioning

Linear

Circular

Dwel

Handle travel Override

Travel Override

Feed Override

Jog Override

acceleration/deceleration

Storage Length

Registered programs

Program edit

Program index

Squence index

Program data input

Background edit

Rigid Tapping

LCD/MDI

Language

Data in/out

Tape code

Sp. Speed

Tool

M,B

Tool length measurement

Cutter compensation C

Tool offset amount

Reference point return

Reference point return check

Auto work reference

Reference System

Etc.

Fixed drilling cycle

mirror image

Program restart

3 axes(X/Y/Z)

0.001mm (0.000039″)

0.001mm (0.000039″)

G20, G21

G00

G01

G02, G03

G04

0.001/0.01/0.1mm (0.000039″/0.000039″/0.000039″)

F0, 25, 50, 100%

0-200% (10% unit)

0-6000mm/min (196.9ipm) (20steps)

Rapid travel : linear

Cutting feed : exponential Soft over treavel

M70 : 600m M700 : 1280m

M70 : 400 M700 : 1000EA

Del, Ins, Alt, Protect

Program Name

N4 Digits

G10

8.4″ Color LCD

English/Korean/Chinese/EU etc.

RS-232C

CF CARD

S5 digit

T2 digit

M2, B2 digit

400조

G28

G27

G53(machine), G54-G59

M

31

FANuC 0i-MD Controller

3 axis (X, Y, Z)

3 axis (G00 & G01 : 3axis, G02 & G03 : 2axis)

X, Y, Zaxis: 0.001 mm (0.0001”)

X, Y, Zaxis: 0.001 mm (0.0001”)

G20 / G21

Each axis / All axes

All axis

Over Trable

+/- 0~9999 pulse (rapid traverse & cutting feed)

8.4” color LCD

Need DNC Program

Sequence, Program

Dry run, program check

Rapid, Jog, handle

x1, x10, x100

F code feedrate direct command

0~200% (10% Unit)

0~5,000 mm/min (197 ipm)

F0, F25%, F50%, F100%

G62

Positioning/Linear/Circular (G00/G01/G02/G03)

G61 / G09

Controlled axes

Simultaneous controllable axes

Least input increment

Least command increment

Inch/Metric conversion

Interlock

Machine lock

Emergency stop

Stored stroke check 1

Stored stroke check 2,3

Mirror Image

Follow-up

Servo off

Backlash compensation

Position switch

Stored pitch error compensation

LCD/MDI

Automatic operation (memory)

MDI operation

DNC operation

Search function

Program restart

Wrong operation prevention

Buffer register

Program check function

Single block

Handle interrupt

Manual jog feed

Manual handle feed-rate

Feed command

Feedrate override

Jog feed

Rapid traverse override

Override cancel

Rapid traverse bell-shaped acceleration/deceleration

Auto corner override

Label Skip

Control in/out

Nano Interpolation

Exact stop mode/

Exact stop

Axiscontrol/Displayunit

Operation

Feedfunctions

Programinput&Interpolationfunctions

Max. T8 digits

G40~G42

Z Axis INPUT C

G43, G44, G49

+/- 6 digits)

400 pairs

RS232C

100Mbps

1280m (512 Kbyte)

400 ea

Copy, move, change of NC program

Alarm & operator message

Selection of 5 optional language

Screen saver

4, 5 Axis

8.4″ color LCD

10.4″ color LCD (Interactive Program)

9 ea (Application can be limited)

40 Block

200 Block

1GB

100 Mbps (Option board is required)

5120m (2 Mbyte)

Tool function

Cutter compensation C

Tool length measurement

Tool length compensation

Tool offset amount

Tool offset pairs

Tool life management

Reader/Puncher interface

Memory card input/output

Embeded Ethernet

Part program storage length

Registered programs

Memory lock

Back ground editing

Extended part program editing

Self-diagnosis function

History display

Help function

Run hour/Parts count display

Actual cutting feedrate display

Spindle/Servo setting screen

Multi-language display

Dynamic switching display language

LCD Screen Save

Sub Axis Control

Two way pitch error compensation

Manual Guide 0i

Manual Guide i

Dynamic graphic display

Optional block skip add

AI contour control(AICC)

AI contour control(AICC) Ⅱ

Nano Smoothing

Tool Management Function

Protection of data at 8 levels

Data server

FASTethernet

Part program storage

length Expand

Toolfunctions/Toolcompensation

Datainput/Output&Editingfunctions

Setting,display,diagnosis

Option

G04, 0~9999.9999sec

G33

G28

G27

G30

M00, M01 / M02, M30

EIA RS-244/ISO 840 (Automatic recognition)

1 EA

+/- 9999.9999 (+/- 8 digits)

O4 /N8

G90 / G91

G17, G18, G19

G52~G59

G50.3

G54.1 P1 ~P48 (48 pairs)

"On" fixed

G10

10 Step

#100 ~ #199 , #500 ~ #999

G02, G03

G73, G74, G76, G80 ~ G89

G31

G68, G69

G50.1, G51.1

G60

Tool offset/message/machine zero point shift

G5.1 (20 Block)

G15, G16

M3 digits

S5 digits, binary output

50%~120% (10% unit)

Dwell

Helical interpolation

Threading/synchronous feed

Manual reference point return

Reference point return

Reference point return check

2nd, 3rd, 4th Reference point return

Program stop/end

Tape code

Optional block skip

Max. programmable dimensions

Program number

Absolute/incremental command

Decimal point input

Plane selection

Work coordinate system setting

Work coordinate preset

Additional work coordinate system

Manual absolute

Programmable data

input

Sub program call

Custom macro

Addition to custom macro common variables

Circular interpolation

Canned cycle

Optional chamfering/corner R

Skip function

High speed Skip function

Automatic coordinate system setting

Coordinate system rotation

Programmable mirror image

Single direction positioning

External data input

Cylindrical interpolation

AI advanced preview control

Polar coordinate command

Miscellaneous function

Miscellaneous function lock

Spindle speed command

Spindle speed override

Spindle orientation

Rigid tapping

Programinput&Interpolationfunctions

Sub/Spindlefunctions

•Figures in inch are converted from metric values.

•Design and specifications subject to change without notice.

32

sIEMENs 828D Controller

5MB

23 digits

7Level

G90 - G91

M - Code

M00, M01, M02, M30

AICC

128/256

Soft Limit

Time, Parts

Internal

Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian,

Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish

5 axes

6 axes (axes + spindle)

0.0001mm / 0.00001inch

0 - 120%

F1, 5, 25/50, 100%

50% - 120%

Max 4 axes

High Speed, Hight Rigidity Function

100EA

TFT 10.4˝ Color

Ref 1, 2 Approach

Start, Stop, Rev, Jog, Ort.

2D

Max. configuration of axes

Max. configuration of axes and sp.

Least Command/input

Feedrate Override

Rapid Traverse Override

Acceleration with jerk limitation

Programmable acceleration

Follow-up mode

Measuring system 1 and 2,

selectable

Separate path feed for corners

and chamfers

Travel to fixed stop

Spindle Override

Spindle Orientation

Spindle Speed Limitation

Rigid Tapping

Linear interpolation axes

Circle via center point

and end point

Circle via interpolation point

Helical interpolation

non-uniform rational B splines

Advanced Surface

Compressor for 3-axis machining

Tool Radius Comp.

Zero Offset

(G54, G55, G56, G57 ,G58, G59)

Programmable Zero Offset

3D Tool Radius Compensation

Tool management

CRT / MDI

Screen saver

Manual Handle/Jog Feed

Reposition

Reference Approach

Spindle Control

Single Block

Feed Hold

Optional Block Skip

Machine Lock

Dry Run

Simulation

ControlFunction

FeedFunction

SpindleFunctions

Interpolations

ToolFunction

DiagnosisFunction

ProgrammingFunction

Alarm display

Monitor

PLC status/LAD display

Part Program Storage Length

Program Name

Subroutine Call

Absolute/incremental Command

Scaling, ROT

Inch / Metric Conversion

Interactive CYCLE program

Block Search

Macro

Read / Write System Variable

BackGround Editing

Miscellaneous Functions

Skip

Program Stop

Lookahead , Jerk LimitationFeed &

forward control

SIEMENS Program exe

Maximum number of tools/cuttings

Number of levels for skip blocks 1

Emergency Stop

Over Travel

Contour Monitoring

Program Protection

Actual Speed Display(Monitor)

Tool Life Management

Work Count Function

Two Language switchable

RS 232C I/F

Ethernet

USB Memory Stick & CF Card

DRF offset

Load and save of MDI

Teach-in

Number of levels for skip blocks 8

Simulation in 3-D display

ShopMill

TRACYL

Transmit

Display

ManualOperation

AutoOperation

ProtectionFunction

AutomationSupportFun.

LanguageFunction

DataTransfer

Option

•Figures in inch are converted from metric values.

•Design and specifications subject to change without notice.

33

HQ and Factory 139, Techno jungang-daero, Yuga-myeon, Dalseong-gun, Daegu, KoreaTel. 053) 582-8036~8 Fax. 053) 582-8039 Homepage. www.ugint.co.kr

Dasa CNC (Weihai) Co., LtdKaiyuan West Road 108-3-4, Lingang Economic and Technological Development Zone, Weihai, Shandong, ChinaTel. 86-631-596-7036~8 Fax. 86-631-596-7039 Homepage. www.dasacnc.com

UG

INT M

achine Tool Line-up Ver. 01 English

business Netwrok

Documents

Applications, that precisely do yours