Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
FINOLEX ACADEMY OF MANAGEMENT AND TECHNOLOGY, RATNAGIRI
(Approved by AICTE, Recognized by DTE and Affiliated to Mumbai University)
MECHAZINE
Bi-Annual Bulletin of
Mechanical Engineering Department
Volume 1, Issue 1(1stJan 2017 to 30th June 2017)
Publishers Dr. Milind S. Kirkire (Head of Department)
Prof. Amar S. Yekane
Prof. Shodhan U. Mayekar
Contents
1. Departmental Vision …………………………………………. 1
2. Departmental Mission …………………………………………. 1
3. Program Specific Objectives (PSOs)……………………………. 1
4. About Department……………………………………………….. 1
5. Departmental Events…………………………………………….. 2
6. Social Events…………………………………………………….. 12
7. Faculty Achievements……………………………………………. 14
8. Student’s Achievements………………………………………….. 17
9. Placements………………………………………………………... 18
List of Faculty/Staff Members in Department
Faculty Members
Prof. (Dr.) Kaushal K. Prasad (Principal) Prof. Mahadeo L. Naik (Assistant Professor)
Prof. (Dr.) Milind S. Kirkire (HoD) Prof. Shodhan U. Mayekar (Assistant Professor)
Prof. (Dr.) Shashikant S. Goilkar (Dean, R & D) Prof. Vikram V. Nagale (Assistant Professor)
Prof. V. Murali Mohan (Associate Professor) Prof. Sachin S. Gurav (Assistant Professor)
Prof. Umesh D. Gulhane (Associate Professor) Prof. Prabodh B. Horambe (Assistant Professor)
Prof. Milind S. Yadav (Associate Professor) Prof. Tushar V. Kavatkar (Assistant Professor)
Prof. Vikram S. Chougule (Associate Professor) Prof. Deep S. Bandivdekar (Assistant Professor)
Prof. Sachin S. Mestry (Assistant Professor) Prof. Ganesh A. Sankpal (Assistant Professor)
Prof. Vidyasheel S. Bagade (Assistant Professor) Prof. Sagar N. Sakharkar (Assistant Professor)
Prof. Abhilasha S. Jadhav (Assistant Professor) Prof. Dipak V. Patil (Assistant Professor)
Prof. Gayatri J. Abhyankar (Assistant Professor) Prof. Dayanand G. Potdar (Assistant Professor)
Prof. Sumit S. Malusare (Assistant Professor) Prof. Shivraj D. Kavhale (Assistant Professor)
Prof. Harshal R. Salvi (Assistant Professor) Prof. Pranav P. Thakur (Lecturer)
Prof. Hemant V. Chavan (Assistant Professor) Prof. Priyanka S. Tupe ( Lecturer)
Prof. Amar S. Yekane (Assistant Professor) Prof. Rushikesh M. Rasal ( Lecturer)
Prof. Jayesh S. Anavkar (Assistant Professor)
Staff Members
Mr. L. G. Patil Mr. A. V. Nhivekar
Mr. V. V. Lohar Mr. R. V. Utekar
Mr. R. R. Bhosale Mr. A. V. Lingayat
Department of Mechanical Engineering, FAMT, Ratnagiri.
1
Department Vision
To become a center of quality education by developing competent engineers who can address
challenges in the field of mechanical engineering.
Department Mission
1. To establish state of the art facilities in department enabling effective training of
students and creating research environment
2. Evolve competent technical professionals through effective delivery of curriculum
and contents beyond, which fulfill the needs of industry and society.
3. To inculcate sense of social responsibility and human values amongst the students.
Program Specific Outcomes (PSOs)
1. Students will be able to investigate problems in the fields of design, thermal and
manufacturing processes through application of statistical techniques.
2. Students will be able to provide computer based automation solutions to
manufacturing and process industries.
Highlights of the Department Intake BE : 120, ME (Machine Design):18
Total 567 students on roll
31 Highly qualified faculty members from institutes like IIT, NIT, VJTI, etc.
Post graduate course (ME Mechanical with specialization in Machine Design)
16 Spacious and state of the art laboratories
Departmental library facility
Advanced licensed software’s like ANSYS, CATIA, Autodesk Inventor, Ideas, Solid
Works, Cam Works
Departmental computing facility with 80 computers
SAE and ISHRE collegiate club
ICT class rooms
GATE forum
Industry tie-ups for training, projects, internships and industrial visits of students
Department of Mechanical Engineering, FAMT, Ratnagiri.
2
Programs organized by the Department
1. Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted expert lecture on “Opportunities in PLM Engineering” on
20th
January, 2017 for the students of final year Mechanical Engineering. It was delivered by
Mr. Parag Hadap, Director, CADEM software solutions, Pune. Prof. M. L. Naik and Prof. P.
B. Horambe organized it.
Mr. Parag Hadap addressing the audience during expert lecture on -Opportunities in PLM Engineering
2. Department of Mechanical Engineering organized Expert lecture on “Employability
Enhancement” on 14th
January 2017 in IT Seminar Hall for students of Third Year
Mechanical Engineering.
Mr. Paresh Teredesai interacting with students during expert lecture on - Employability Enhancement
Department of Mechanical Engineering, FAMT, Ratnagiri.
3
The lecture was delivered by Mr. Paresh Teredesai, IT Service Centre Head, Kone Cranes
India Pvt. Ltd, Pune. Prof J. S. Anavakar introduced the Resource person to the audience. Mr.
Teredesai interacted with student regarding expectation of industry from fresh engineering
graduates. He also guided students on how to write resume, how to face technical and
personal interview and group discussion through his experiences. The event was organized by
Prof J. S. Anavkar and Prof S. S. Mestry.
3. The Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted an expert lecture on “Opportunities of Energy Saving in
Thermal, Refrigeration and Air-Conditioning” on 18th
January, 2017 for the students of final
year Mechanical Engineering. It was delivered by Mr. Ajitkumar S Datar who is
professionally an approved energy auditor by BEE Government of India. Prof. V S Bagade,
Prof. S U Mayekar, Prof. H V Chavan and Prof. D S Bandivadekar were the coordinators for
this expert lecture.
Prof. M. N. Tagare (Dean, Student Affairs), Dr. M S Kirkire (HoD), Prof. V S Bagade and Mr. Ajitkumar Datar
(the guest) during expert lecture on - Opportunities of Energy Saving in Thermal, Refrigeration and Air-
Conditioning
4. The Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted Career guidance seminar on “Oil and Gas sector and
HVAC” on 9th
February, 2017 for the students of final year Mechanical Engineering. It was
delivered by Mr. Vasant Dinkar Mestry who is Managing Director of Suvidya Institute of
Technology, Mumbai. Prof. H V Chavan, Prof. M. L. Naik, Prof. P. B. Horambe and Prof D.
S. Bandivadekar were the coordinators for this seminar.
Department of Mechanical Engineering, FAMT, Ratnagiri.
4
Mr. V. D. Mestry addressing the students during Career guidance seminar on - Oil and Gas sector and HVAC
5. The Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri arranged seminar on “Awareness of GATE 2018” on 07th February,
2017 for the students of third year Mechanical Engineering. It was delivered by Mr. Vijay
Acharya who is Business Development Manager (Strategic Alliances) of Vidyalankar Group
of Institutions. Speaker included importance of GATE, historical result analysis of GATE,
Strategies of preparation & time management while writing the exam. Prof. H V Chavan,
Prof. S U Mayekar & Prof. M L Naik were the coordinators for this seminar.
Mr. Vijay Acharya addressing the students during seminar on - Awareness about GATE 2018
6. The Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted a 40 hours “Course on ANSYS FEA” during 11th - 12th
and 17th - 19th February 2017 for third year Mechanical Engineering students in
Department of Mechanical Engineering, FAMT, Ratnagiri.
5
collaboration with ARK Info solutions pvt. Ltd. Dr. M. S. Kirkire, Prof. M L Naik and Prof.
P B Horambe coordinated the workshop successfully. Prof. V Murali Mohan, Prof. Rasal and
Prof. Kavhale extended the necessary support during the workshop.
Dr. M. S. Kirkire felicitating Mr. Saumil Trivedi and Mr. Krishna Chaitanya with Prof. P B Horambe during
commencement of - Course on ANSYS FEA
7. Mechanical Engineering Students Association (MESA) organized an event TECHNO-VERVE
2K17 under the valuable guidance and support of Dr. M. S. Kirkire (Head, Mechanical
Engineering Department on 2nd
and 3rd
March 2017.
Dr. Kaushal Prasad (Hon. Principal) formally inaugurating TECHNO-VERVE 2K17
8. The Department of Mechanical Engineering, organized Industrial visit to Automotive
Corporation of Goa Limited (ACGL), Sattari, Goa on 4th
of March 2017 for B.E Mechanical
Engineering students. Entire visit was successfully planned and coordinated by Prof.
Department of Mechanical Engineering, FAMT, Ratnagiri.
6
Mahadev Naik and Prof Priyanka Tupe. Total 34 students of B.E. Mechanical along with 2
faculty members visited ACGL.
Industrial Visit to ACGL, Goa Campus
9. The Department of Mechanical Engineering conducted a 3 days workshop on “PLC (Allen
Bradley) & SCADA (Wonder Ware In Touch)” during 17th
- 19th
March 2017 for the third
year Mechanical Engineering students. It was conducted by Mr. Ramesh Wagchure (Senior
Project Developer, Prolific Systems & Technologies Pvt. Ltd., Pune). Workshop commenced
on 17th
of March 2017.Prof. V. V. Nagale, Prof. A. S. Yekane & Prof. S. S. Gurav
coordinated the workshop successfully.
Participants - during theory/practical session during workshop on - PLC & SCADA
10. Department of Mechanical Engineering organized two days Industrial training for final
year Mechanical Engg students at Accurate Engg, Hadapsar, Pune with an objective to
Department of Mechanical Engineering, FAMT, Ratnagiri.
7
minimize gap between curriculum and industrial practices in the field of metrology. Total 30
number of students participated in this training. The training was based on application based
advanced metrology, geometric dimensioning and tolerancing (GD &T) and 3D coordinate
measuring machine (CMM) with scanning system. The whole program was successfully
organized and coordinated by Prof. Hemant V Chavan.
Prof. H V Chavan with participants during two days Industrial training at Accurate, Pune
11. Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted workshop on “Maintenance of Refrigeration and Air-
Conditioning Systems” on 24th March, 2017 for students of final year Mechanical
Engineering. Prof. V S Bagade and Prof. S U Mayekar coordinated this workshop.
Mr. J A Jaygade demonstrating components of RAC workshop on - Maintenance of Refrigeration and Air-
Conditioning Systems
Department of Mechanical Engineering, FAMT, Ratnagiri.
8
12. Department of Mechanical Engineering organized a course enrichment program for
second year Mechanical Engineering students on 25/03/2017 at C-1/6. The students were
enriched with contents beyond syllabus such as - kinematic synthesis of mechanisms,
accuracy points, spacing of accuracy points, coupler curves and cognate linkages. At the end,
students were introduced to SAM (Synthesis and Analysis of Mechanism) software. Total
109 students registered for the course. The course was conducted by Prof. Sachin Mestry and
coordinated by Prof. Milind Yadav under the guidance of Dr. Milind Kirkire (Head,
Mechanical Engineering Department).
Prof. Sachin Mestry with participants during course enrichment program on - Introduction to Analysis and
Synthesis of Mechanisms
13. Department of Mechanical Engineering conducted seminar on ‘Six Sigma’ on 29th
March,
2017 for final year Mechanical Engineering students. With an objective to give overview of
Six Sigma and its benefits for students in career, the seminar was delivered by Dr. M. S.
Kirkire (Head, Mechanical Engineering department) and coordinated by Prof. H. V. Chavan
and Prof. M. L. Naik. Total 99 students were present for the seminar.
Dr. M. S. Kirkire addressing the audience during seminar on - Six Sigma
Department of Mechanical Engineering, FAMT, Ratnagiri.
9
14. The Department of Mechanical Engineering of Finolex Academy of Management and
Technology, Ratnagiri conducted training program on “Aptitude Test” on 27th
to 29th
January, 2017 for the students of final year Mechanical Engineering. It was delivered by Mr.
Mandar Zarekar, CEO, MUDRAA Training. Prof. M. L. Naik and Prof. P. B. Horambe were
the coordinators for this programme.
Mr. Mandar Zarekar addressing the audience during training program on - Aptitude Test
15. The Department of Mechanical Engineering, Finolex academy of management and
technology organized two day industrial visit at Finolex Industries Limited, Ratnagiri on 20-
04-17 &21-04-17, for third year Mechanical Engg students. Entire visit was organized and
conducted by Mr. Hemant Chavan, Asst Professor in Mechanical Engg Department. Total 77
numbers of students have participated in this industrial visit.
Industrial Visit to Finolex Industries Ltd. Ranpar
16. The Department of Mechanical Engineering, Finolex Academy of Management and
Technology organized one day industrial visit at Gadre Marine Exports Pvt. Ltd., Ratnagiri
on 14 April 2017,for third year Mechanical Engineering students. Visit was organized with
the aim to overview of different mechanical components of steam boilers and their actual
Department of Mechanical Engineering, FAMT, Ratnagiri.
10
operation. Hence, the students visited the boiler division. The visit was organized and
conducted by Mr. Deep Bandivadekar.
Industrial Visit to Gadre Marine Exports Pvt Ltd, Ratnagiri
17. The department of Mechanical Engineering conducted Parents Meet of T.E. Mechanical
Engineering on 25 February, 2017. Prof J. S. Anavkar welcomed all parents for the meet. Dr.
M. S. Kirkire, HoD, addressed the parents while highlighing overall functioning of the
department along with co-curricular & extracurricular programs conducted/organized by the
department; the future plans for various value added & add-on courses and its’ importance
for placement of the students were also discussed.
Dr. M. S. Kirkire addressing the parents during parent meet
Department of Mechanical Engineering, FAMT, Ratnagiri.
11
Social Events 1. The Department of Mechanical Engineering of Finolex Academy of Management and Technology, Ratnagiri organized a “One day training program based on carpentry” at Abhyankar MukBadhir Vidyalaya, Ratnagiri, on 7th February 2017 for the physically handicapped students. In this, training program Prof. Amar Yekane and Mr.Deepak Mestry enlightened the students about the importance, applications and opportunities in context with carpentry.
Introductory speech by Mrs.Tatke (Head Mistress, Abhyankar MukBadhir Vidyalaya) during One day
training program based on carpentry
2. Driving licenses (learning) camp was organized on 21st January 2017. Mr. S. N. Barge and
Mr. R. S. Dhobale (RTO Inspector, Ratnagiri) graced the camp with their presence. Mr. S.N.
Barge addressed students regarding importance of road safety. Driving licenses (learning)
were issued to 98 students from various departments of FAMT. The event was organized by
Prof M.S.Yadav and Prof. H.V.Chavan.
Instructions and form filling activity during the driving licence camp
Department of Mechanical Engineering, FAMT, Ratnagiri.
12
Faculty Achievements
Journal/Conference Publications
1. Dr. Kaushal Prasad published paper entitled as “Experimental Study of Residual Tensile
Strength of Drilled composite” in International Journal of Material Science and
Engineering, Vol. 4, DOI: 10.17706/ijmse.2017.5.1.pp:35-46,March 2017.
2. Dr. Kaushal Prasad published paper entitled as “Screw Feeder performance prediction
using Discrete Element Method (DEM)” in International Conference on Sustainable
Development in Design and Manufacturing, at Saraswati College of Engineering (SCOE)
Navi Mumbai, January 2017.
3. Dr. Kaushal Prasad published paper entitled as “Analytical Study of Thrust Force for
Drilled Composite” in International Conference on Sustainable Development in Design
and Manufacturing, at Saraswati College of Engineering (SCOE) Navi Mumbai, January
2017.
4. Dr. M. S. Kirkire published paper entitled as “Evaluation of success factors for medical
device development using grey based DEMATEL approach” in the Journal of Modelling
in Management. (Emerald Publications) Scopus indexed.
5. Dr. M. S. Kirkire published paper entitled as “Optimization of CNC Milling Parameters
Using “Artificial Neural Network” in Imperial Journal of Interdisciplinary Research
(IJIR) Vol-3, Issue-2, 2017 ISSN: 2454-1362. (Impact Factor: 3.75).
6. Dr. M. S. Kirkire published paper entitled as “Investigation of Effect of Joint Clearance
on Vibration of Planar Mechanism” in International Journal of Modern Trends in
Engineering and Research, Vol. 3 Issue 7, pp. 139-144. (Impact Factor: 3.518).
7. Dr. M. S. Kirkire published paper entitled as “Finite Element Analysis of Femur
Prosthesis Using ASYS in Static and Dynamic Condition” in 2nd Biennial International
Conference on Nascent Technologies in Engineering (ICNTE 2017) (January 27-28). An
IEEE Technically Co-Sponsored Conference. Fr. C. Rodrigues Institute of Technology,
Vashi, Navi Mumbai, India.
8. Dr. M. S. Kirkire published paper entitled as “Design and Analysis of High Pressure
Extractor with Supercritical Fluid” in 6th National Conference RDME 2017, 17th- 18th
March. M.E.S. College of Engineering, Pune.
9. Dr.S.S.Goilkar published research paper entitled as “Design and Development of
variable damping device for vibration control with ER fluid.” In International Journal of
Advances in Intelligent System Research Vol.137 ISBN 978-94-6252-305-0 , 2017
10. Dr.S.S.Goilkar presented research paper entitled as “Establishment of Innovative and
Entrepreneurship development center to promote Entrepreneurship among Engineering
students-A case study” In International conference on Emerging Issues in Commerce,
Management, Finance, Humanities and Extension work 4th February 2017.
11. Dr.S.S.Goilkar presented research paper entitled as “Implementation of University Policy
to Incubate Extension work among Professional Students” In International conference on
Emerging Issues in Commerce, Management, Finance, Humanities and Extension work
4th February 2017.
Department of Mechanical Engineering, FAMT, Ratnagiri.
13
12. Prof. U.D. Gulhane published paper entitled as ”Investigating the Effect of Material’s
Initial Temperature on surface roughness for Milling of Al 6061 alloy using full factorial
approach” in World journal of engineering research and
technology,www.wrjert.org,wrjt,2017 , vol 3 issue3 April 2017.
13. Prof. U.D. Gulhane published paper entitled as” Wear analysis of composite material
made by blending of naturally available coconut shell powder (CSP)” in World journal of
engineering research and technology, www.wrjert.org,wrjt,2017,vol 3 issue3, April 2017.
14. Prof. M.S. Yadav published paper entitled as “Parametric study on oxy hydrogen gas
generation and related energy consumption using Taguchi’s design of experiment
concept.” In 2nd
Biennial International conference of Nascent Technology in Engineering ,
January 2017
15. Prof. V.S.Bagade published paper entitled as “Experimental Investigation of Convective
heat transfer by permeable fins at different angle of inclination on Reynolds’s no in
forced convection “in Journal of Advances in Science and technology vol.13 Issue 1,
March 2017.
16. Prof. V.S.Bagade published paper entitled as “Structural analysis of Gas turbine blade” in
International research journal of Engineering and technology Vol.4, Issue 5, May 2017
17. H.R. Salvi has published paper on “ Design and Analysis of Intelligent Braking system”,
in International Journal of Engineering and Development Research 2017 volume5 Issue 1
ISSN:2321-9939
18. Prof. H. V. Chavan published paper entitled as “Heat transfer enhancement by using
twisted tape insert” in IJSER, Volume 8, issue 1, January 2017.
19. Prof. H. V. Chavan published paper entitled as “Heat transfer enhancement using twisted
tape of different twisted ratio” in IRJET, volume 4, issue 5, May 2017.
20. Prof. M.L.Naik published paper entitled as “Fault Diagnosis and Experimental analysis of
Four stroke four Cylinder petrol engine using Fault tree analysis. “in International Journal
of Engineering trends and Technology, Vol 46,2017
21. Prof. S. U. Mayekar published paper entitled as “Experimental investigation of effects of
angle of inclination on convective heat transfer through permeable fins in natural
convection”, in Journal of Advances in Science and Technology ,Vol. 13, Issue No. 1,
(Special Issue) March-2017
22. Prof. S. U. Mayekar published paper entitled as “Experimental Investigation of
Convective Heat Transfer by Permeable Fins at Different Angles of Inclination and
Reynolds Numbers in Forced Convection” in 1st National Conference on Mechanical
Engineering in Next Decade (NC-MEND 2017), March 10-11, 2017 at Government
Engineering College, Karad, Maharashtra, India.
23. Prof. T.V.Kavatkar published paper entitled as “ Design and Analysis of Intelligent
braking System” in International Journal of Engineering and Development research,
Vol.5, Issue 1, 2017
24. Prof. T.V.Kavatkar published paper entitled as “Experimental and Statistical parametric
investigation of CWML sandwich panel” in International Journal of Innovations in
Engineering and technology, vol 8, Issue 1, 2017
25. D.V. Patil published paper entitled as“ Finite Element Analysis of thin walled beams
joined by spot welding” in International Journal of Scientific Development and research
2017
Department of Mechanical Engineering, FAMT, Ratnagiri.
14
26. Prof. P.P.Thakur published paper entitled as“ Effect of GTAW – SMAW Hybrid welding
process parameters on Hardness of weld” in International Journal of Engineering research
and technology, Vol.10,March 2017
27. Prof. R.M.Rasal published paper entitled as “Response surface methodology based
optimization of operating parameters of variable compression ratio C.I. engine fuelled
with diesel-fish oil blends for minimal emissions” in International Journal on Current
engineering and technology, Issue 5, June 2017
28. Prof. R.M.Rasal published paper entitled as “Optimization of Operating Parameters of
C.I. Engine Fuelled with Diesel-Fish Oil Blends at Various Compression Ratios and
Injection Timings Based on Taguchi's Concept of Doe for Minimal Emissions” in
International Journal Scientific Research and Development, vol.5, Issue 2, April 2017.
Book Publications
1. Prof. V. Murali Mohan published book entitled as “Free Vibration Analysis of Structural
Joints” and published by LAP LAMBERT Academic Publishing Germany (ISBN13:
783659963278, ISBN10: 3659963275, EAN: 9783659963278), (Published on: 05th OCT,
2016).
2. Prof. V. Murali Mohan published book entitled as “Residual Stress Analysis in
Orthogonal Cutting Process” and published by LAP LAMBERT Academic Publishing
Germany, (ISBN-13: 978-3-330-01015-4 , ISBN-10: 3330010150 , EAN:
9783330010154)
Faculty Development Programs
1. Prof.J.S.Anavkar has attended One week short term training program on “Modeling &
Optimisation Techniques for Engineering Applications” at SVNIT Surat, December 2016.
2. Prof.J.S.Anavkar has attended short term training programon “Modernization in
Mechanical Engineering Education “at D.Y.Patil Engineering College Pune, December
2016.
3. Prof.M.L.Naik has attended One week short term training program on “Modeling &
Optimization Techniques for Engineering Applications “at SVNIT Surat, December 2016
4. Prof.S.U.Mayekar has attended AICTE sponsored STTP on “Advances in Refrigeration
and Sustainable Energy”, December 2016.
5. Prof.V.S.Bagade has attended STTP on “Introduction to Computational Fluid Dynamics-
Application, Design and Development” at IIT Bombay, May-June 2017.
Other
1. Dr. Kaushal Prasad won best paper award in International conference held at Saraswati
College of Engineering, Kharghar.
2. Dr. M. S. Kirkire chaired a Technical Session at National Conference CTRD 2017 at
RMCET, Ambav.
3. Dr. M. S. Kirkire was resource person for career in Engineering & Technology at Career
fair organized by University of Mumbai
4. Dr. M. S. Kirkire is nominated as Member, Board of Studies in Fisheries Engineering
5. Dr. S. S. Goilkar is author of a Chapter entitled as “ Managing Relationship with
Management and Colleagues” of a book “Higher Education Faculty career orientation and
Department of Mechanical Engineering, FAMT, Ratnagiri.
15
advancement “ Published by Center of Education growth and research released on 18th
April 2017 Delhi.
6. Dr. S. S. Goilkar worked as Review committee member of 5th National Conference on
“Innovations in Mechanical Engineering” (NCIME2017) SIT Lonavala in 7-9 April 2017
7. Prof. M. S. yadav chaired a Technical Session at National Conference CTRD 2017 at
RMCET, Ambav.
Student’s Achievements
Mr. Suraj Patinge won best paper award in International conference held at Saraswati College
of Engineering, Kharghar.
Publications
1. Sawant, F. K. Phansopkar & H. T. Prabhu published paper entitled as “ Maintenance &
repair of gear pump test rig” in International research journal of engineering and
technology, Vol. 4, Issue 4, April 2017.
2. Rajat Prabhu, Shubham Rahate, Priyanka Prabhu & Harshal Narvankar published paper
entitled as “ Sress analysis of meshing gears with addendum modification” in International
journal of advance research in science & engineering, Vol. 6, Issue 2, February 2017.
3. Vishal Patil, Nathaji Chavan, Amit Patne & Gaurav Dongare published paper entitled as “
Invistigation of effect of shot peening on fatigue life of composite material ” in
International research journal of engineering and technology, Vol. 4, Issue 4, April 2017.
4. Suresh Jangale, Pushpak Joshi, Niraj Kadam& Akhilesh Vinchu published paper entitled as
“Experimental & Statistical Parametric Investigation of CWML Sandwich Panel”, International
Journal of Innovations in Engineering and Technology. 2017 IJIET | Volume 8, Issue 1.
5. Keyur N. Rege published paper entitled as “Experimental Investigation of Convective Heat
Transfer by Permeable Fins at Different Angles of Inclination and Reynolds Numbers in
Forced Convection” in Journal of Advances in Science and Technology ,Vol. 13, Issue No.
1, (Special Issue) March-2017
6. Aniket Pendse and Sarveshkumar Pashte published paper entitled as “Experimental
investigation of effects of angle of inclination on convective heat transfer through
permeable fins in natural convection”, in Journal of Advances in Science and Technology,
Vol. 13, Issue No. 1, (Special Issue) March-2017.
Vehicle competitions at National Level
1. TEAM MATADORS, a team of 15 students from Mechanical, Electrical and Electronics
department participated in National Level ECO KART SERIES 2017, Season 4 at BML
MUNJAL University, Haryana. 54 teams got qualified for this dynamic event across the
country and finally team Matadors achieved 15th
rank amongst 104 teams from colleges
across the nation.
Department of Mechanical Engineering, FAMT, Ratnagiri.
16
Team Matadors with mentor Prof. V Murali Mohan
2. Team 25 Nightmares comprising of 25 students from second year and third year
Mechanical Engineering of FAMT, Ratnagiri and led by Team Captain Mr. Sairaj Koltharkar
secured the 2nd
Rank in the National level Student Grand PRIX 2K17 event organized by
Seven Motors at Visakhapatnam during 26 - 28 February 2017. Team Mentors viz. Prof.
Milind Yadav, Prof. Hemant Chavan and Prof. Dipak Patil of Mechanical Engineering
Department.
Team 25 Nightmares
Department of Mechanical Engineering, FAMT, Ratnagiri.
17
3. Indian Karting Championship 2017 powered by Nexus Group Of Institute held on 26th –
30th of January 2017 at PCNTDA Traffic Park, Pune. The journey of the event began with
the virtual round where teams must submit their design report which includes analysis,
simulation, cad models and calculations of the proposed vehicle. After submissions, scores
were declared wherein Team Redline of FAMT Racing achieved 23rd
rank. Team mentor
Prof. Tushar Kavatkar.
Team Redline Racing
4. NSVC 2016-17 organized by Dynamist Motorsports, New Delhi invites students to design
single person, light weight, high efficiency electrical vehicle with three or four pneumatic
tires. The vision of NSVC is to stir the minds of young technocrats to make way for India to
become largest renewable energy hub in the world by increasing public awareness and
understanding of efficient alternative electric vehicles and related technologies. Team
Saurveg of FAMT secured 5th
place in country’s first edition of National Solar Vehicle
Challenge out of 69 teams and grabbed the best innovation prize and the lightest vehicle
award and a total prize money of Rs.25000/-. The competition was conducted during 21st to
24th
March 2017. Team mentors- Dr. Kaushal Prasad, Prof. Sumit Malusare, Prof. Rushikesh
Rasal.
Team Saurveg during prizes distribution
Department of Mechanical Engineering, FAMT, Ratnagiri.
18
Placements
During academic year 2016-17, total 141 students were eligible for placements out of which
88 students have been offered jobs in various organizations.