2
100% NOT GREATER THAN NON PRIMARY MATERIALS 70% 3 Kg 18-24 Kg ALPHACRETE ® ATHENA ARCHITECTURAL MASONRY SPECIFICATION Fine surface finish and sharp, straight lines Features & Benefits ° A fine surface finish and sharp, straight lines. ° Ofers superb resistance and sound reduction qualities. ° Ideal for internal and external use. ° An economical alternative to traditional materials. ° Dimensionally accurate flat surfaces make it the perfect complement for adding detailing features, banding or panelling to the Phoenix range. ° A comprehensive selection of special shapes is available for detailing purposes. ° Aggregates sourced from our own quarries located at Fivemiletown, Belcoo and Pomeroy. Sienna Veronese Venetian Red Sporting Green COLOURS: All colours made to order (minimum quantity required). Francesco Ash Minerva Basalt Verona Sand Ernestone Buff Baroque Terracotta Classico Blanco Palazzo Sepia Pantheon Amber Sustainability Data ENERGY USE: 100% renewable WATER USED: 100% rain water harvesting RECYCLABLE: 100% of this product can be recycled MANUFACTURING Produced in the UK from LOCATION: locally sourced materials NON-PRIMARY: Not greater than 70% WASTE WOOD & PLASTIC: 100% recycled CARBON FOOTPRINT: 18 - 24 Kg CO 2 / m 2 CARBON REDUCTION: 3 Kg CO 2 / m 2 BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification. # Building Research Establishment’s Environmental Assessment Method.

ARCHITECTURAL MASONRY SPECIFICATION - Acheson · ARCHITECTURAL MASONRY SPECIFICATION ... Download our Declaration of Performance (DOP) data at: ... BS EN: 771-3: 2011 (category D2)

  • Upload
    donhan

  • View
    231

  • Download
    0

Embed Size (px)

Citation preview

100%

3

NOT GREATER THAN

NON PRIMARYMATERIALS

70%3 Kg18-24 Kg

ALPHACRETE® ATHENAARCHITECTURAL MASONRY SPECIFICATION

Fine surface finish and sharp, straight lines

Features & Benefits° A fine surface finish and sharp, straight lines.

° Offers superb resistance and sound reduction qualities.

° Ideal for internal and external use.

° An economical alternative to traditional materials.

° Dimensionally accurate flat surfaces make it the perfect complement for addingdetailing features, banding or panelling to the Phoenix range.

° A comprehensive selection of special shapes is available for detailing purposes.

° Aggregates sourced from our own quarries located at Fivemiletown, Belcooand Pomeroy.

Sienna Veronese Venetian Red Sporting Green

COLOURS: All colours made to order (minimum quantity required).

Francesco Ash Minerva Basalt Verona Sand Ernestone Buff Baroque Terracotta Classico Blanco Palazzo Sepia Pantheon Amber

Sustainability DataENERGY USE: 100% renewable

WATER USED: 100% rain water harvesting

RECYCLABLE: 100% of this product can be recycled

MANUFACTURING Produced in the UK from LOCATION: locally sourced materials

NON-PRIMARY: Not greater than 70%

WASTE WOOD & PLASTIC: 100% recycled

CARBON FOOTPRINT: 18 - 24 Kg CO2 / m2

CARBON REDUCTION: 3 Kg CO2 / m2

BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification.

# Building Research Establishment’s Environmental Assessment Method.

ALPHACRETE® ATHENAARCHITECTURAL MASONRY SPECIFICATION

MANUFACTURE: Alphacrete® Athena architectural masonry blocksare manufactured from quarried limestone,cement and pigment. The fine finish of theAlphacrete® range is due to the most moderncomputer-controlled manufacturing process.

PLANT OF MANUFACTURE (POM):Made at our Fivemiletown Production Plant.

STANDARDS & PERFORMANCE:Manufactured and tested to category D2 withinBS EN 771-3: 2011 - Class 2 (Length: +1 / -3mm,Width: +1 / -3mm, Height: + or - 2mm).

SPORTING GREEN: AG developed the Sporting Green colour to helpachieve the requirement as prescribed by SportEngland in the design guidance notes (section 5)February 2011. AG’s Sporting Green colour willgive sufficient contrast against sportingaccessories. Further to this, the finish of the blockwork will give a uniform look across all planesadding aesthetic value to the project.

CERTIFICATION:

ISO 14001: Environmental Management.

OSHAS 18001: Occupational Health and SafetyManagement.

CE Marking: Download our Declaration ofPerformance (DOP) data at:

www.acheson-glover.com/cemarking

SPECIFICATION REFERENCE:

NBS PLUS: 45-80-50/300 Aggregate concreteblocks

F10 Brick/ block walling - 255CONCRETE FACING BLOCKWORK

BS EN: 771-3: 2011 (category D2)

NOTES: Alphacrete masonry units are manufactured using natural stonewhich can vary slightly in tone. Where possible it is advised to orderfrom the same production run to avoid the possibility of tonevariations (shading).

We also recommend that products are selected from at least threebales, within each delivery. This will eliminate 'banding'.

Like all quality concrete products with a high cement content,Alphacrete masonry units can display the effects of efflorescence.Sometimes known as ‘white bloom’, this naturally occurringphenomenon will disappear over time and does not effect thestructural integrity of the blocks.

Care should be taken when handling Alphacrete masonry units.During transport and delivery some ‘chipping’ (up to 5%) can beexpected. These can be used for cuts and detailing.

All faces can be exposed excluding the top and bottom of the unit.

Frost ResistantT: 028 8778 8112 | www.ag.uk.com

PRODUCT DATA:product/code size in colours m2 per compressive units unit weight packs per packs per

(mm) stock available pack strength # per pack weight per pack 8 wheeler unit lorry

Athena A100 440x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 72 18.5 Kg 1.37 t 13 20Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A102 440x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 72 14 Kg 1 t 14 IRE 20 / GB 22Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A200 440x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 48 25.7 Kg 1.28 t 13 IRE 20 / GB 21Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A206 440x215x140 MTO Baroque Terracotta / Classico Blanco / 4.96 10 N/mm 48 19 Kg 0.83 t 21 30Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A302 440x215x215 MTO Baroque Terracotta / Classico Blanco / 4.05 10 N/mm 40 23.5 Kg 0.98 t 14 IRE 20 / GB 28Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A101 215x215x100 MTO Baroque Terracotta / Classico Blanco / 7.29 10 N/mm 144 9.5 Kg 1.37 t 13 20Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A201 215x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 96 13 Kg 1.28 t 13 IRE 20 / GB 21Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

Athena A303 220x215x215 MTO Baroque Terracotta / Classico Blanco / 3.24 10 N/mm 64 13 Kg 0.78 t 13 IRE 20 / GB 22Half Block Hollow Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Sporting Green / Venetian Red / Verona Sand

MTO - made to order (minimum order size 500m2). # Additional unit strengths are available (N/mm) - please ask for more information.