2
INSTRUCTIONS AA-3400 12-Lead EKG Trainer When used by a qualified instructor, this trainer is an excellent tool for training in Lead Placement for a 12-Lead EKG. The instructor should ensure that the correctly labeled Magnet Lead is used in its proper position on the manikin. Can be used in conjunction with your own 12 Lead Monitor and the optional AA-600 series 12-Lead Simulators. Contents: 1 - Manikin 1 - Signal Generator* 1 - Set of 10 Magnet Leads 1 - Signal Generator EKG Cable Instruction For Use: Electrode Placement Training 1. Connect the manikin to the Signal Generator. 2. Push the red power button to activate Signal Generator. Note: The unit turns itself off after 10 minutes of inactivity. 3. Place the Magnet Leads in their proper positions on the manikin. As each Magnet Lead is placed, the instructor should verify that the appropriate light on the signal generator has illuminated. When all ten Magnet Leads are in place the “ALL” signal will illuminate. 575 Knightsbridge Pkwy. P.O. Box 700 Lincolnshire, IL 60069-0700 800/323-4220 847/913-0101 FAX: 847/913-0138 www.armstrongmedical.com [email protected] Armstrong Medical INDUSTRIES INC. Optional 12 Lead Simulator 1 3 3

Armstrong Medical the Magnet Leads in their proper positions on the manikin. As each Magnet Lead is placed, the instructor should verify that the appropriate light on the signal generator

  • Upload
    lamkhue

  • View
    212

  • Download
    0

Embed Size (px)

Citation preview

INSTRUCTIONS

AA-3400 12-Lead EKG Trainer

When used by a qualified instructor, this trainer is an excellent toolfor training in Lead Placement for a 12-Lead EKG. The instructorshould ensure that the correctly labeled Magnet Lead is used in itsproper position on the manikin. Can be used in conjunction withyour own 12 Lead Monitor and the optional AA-600 series 12-Lead Simulators.

Contents: 1 - Manikin1 - Signal Generator*1 - Set of 10 Magnet Leads1 - Signal Generator EKG Cable

Instruction For Use:Electrode Placement Training

1. Connect the manikin to the Signal Generator.2. Push the red power button to activate Signal Generator.

Note: The unit turns itself off after 10 minutes of inactivity.3. Place the Magnet Leads in their proper positions on the manikin.

As each Magnet Lead is placed, the instructor should verify that theappropriate light on the signal generator has illuminated. When allten Magnet Leads are in place the “ALL” signal will illuminate.

575 Knightsbridge Pkwy. • P.O. Box 700 • Lincolnshire, IL 60069-0700 • 800/323-4220 • 847/913-0101 FAX: 847/913-0138 • www.armstrongmedical.com • [email protected]

Armstrong MedicalI N D U S T R I E S I N C .

Optional 12Lead Simulator

1 3 3

Electrode Placement Training With Rhythm Training

1. Connect the manikin to the Signal Generator.2. Connect the Signal Generator EKG cable to the

Signal Generator.3. Attach the Signal Generator EKG leads wires to the

optional 12-Lead Simulators (as shown).4. Connect your monitors EKG leads to the correct

snap position on the Signal Generator.5. Turn on the simulator, Signal Generator and monitor.6. Place the Magnet Leads in their proper positions on

the manikin to view rhythms on the monitor.

* The Signal Generator has 10 minute auto shut-off when not in use to preserve battery life.

INSTRUCTIONS

AA-3400 12-Lead EKG Trainer

C A U T I O N !Manikins soft flesh colored parts are extremely porous and can be easily stained by ink from pens or printed material,lipstick, grease and dirt. Do not let these items come in contact with manikin or stains will almost surely occur and bedifficult or impossible to remove.

Place/Snap ECGleads from your 12Lead ECG Monitor

AA 600 SeriesSimulator

800/323-4220 • FAX: 847/913-0138www.armstrongmedical.com • [email protected]

Armstrong MedicalINDUSTRIES, INC.