Embed Size (px)
Citation preview
Kaba Door Furniture
AS1428 Design for Access and Mobility
Kaba Australia has been designing and developing door furniture in Australia for over 30 years. Our extensive range includes a wide selection of items that are suitable for installations needing to comply with the Australian Standard AS1428 Design for Access and Mobility.
LEVER HANDLES
240 Series Page 1270 Series Page 2280 Series Page 3740 Series Page 4
PLATE FURNITURE
100 Series, 600 Series Page 5N100 Series, N600 Series1500 Series, 2900 Series Page 6DA Turn Snibs Page 7
TAFE AND WAFE
Tafe and Wafe Page 8
PULL HANDLES
Pull Handles, Handles on 300 Plate Page 9PP300 and PH300 Plate5200 Push Plate and Pull Handles5250 Push Plate and Pull Handles Page 10
ELECTRONIC DOOR FURNITURE c-lever Page 11E-Flash Range Page 12
Index
PRIVACY INSIDE Shown as 240 rose
Lever Handles
240 Series
The 240 Series is a high quality, cost effective range of handles suitable for commercial and domestic applications. Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door. This series has been designed to suit Kaba mortice locks and latches but is also compatible with similar locks and tubular latches.
240-30 DIMENSIONS
LENGTH 102mm
PROJECTION 49mm
CLEARANCE 43.4mm
53
49
27
43.4
21.7
102
22
240-32 DIMENSIONS
LENGTH 118mm
PROJECTION 57mm
CLEARANCE 45mm
240-33 DIMENSIONS
LENGTH 113mm
PROJECTION 64mm
CLEARANCE 43mm
240-36 DIMENSIONS
LENGTH 113mm
PROJECTION 53mm
CLEARANCE 45mm
53
6443.0
37
21
113
16
53
57
2925.3
45.0
118
24
45
26
53
53
113
15
Kaba Australia has numerous lever handle options that meet the requirements of AS1428, covering both contemporary and classic designs. All Kaba lever sets are sold as a pair.
Page 1
Lever Handles
270 Series
The 270 Series is a premium quality range of door furniture constructed of a solid brass mounting plate. The range has been designed for commercial applications and is best suited to heavy traffic areas or for external applications. Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door and have been designed for use with Kaba mortice locks and latches but are also compatible with similar locks and tubular latches.
270-30 DIMENSIONS
LENGTH 102mm
PROJECTION 49mm
CLEARANCE 43.4mm
53
49
27
43.4
21.7
102
22
270-25 DIMENSIONS
LENGTH 113mm
PROJECTION 64mm
CLEARANCE 43mm
53
6443.0
37
21
113
16
270-32 DIMENSIONS
LENGTH 118mm
PROJECTION 57mm
CLEARANCE 45mm
53
57
2925.3
45.0
118
24
Page 2
Lever Handles
280 Series
The 280 Series is a premium quality range of door furniture constructed of a solid brass mounting plate and 316 grade stainless steel dress ring and lever. The range has been designed for commercial applications and is suited for use in coastal or harsh climate conditions.Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door and have been designed for use with Kaba mortice locks and latches but are also compatible with similar locks and tubular latches.
280-20 DIMENSIONS
LENGTH 124.5mm
PROJECTION 63mm
CLEARANCE 44mm
280-21
Page 3
5338 23 57.4
19
12153
25 63
44
124.5
19
DIMENSIONS
LENGTH 121mm
PROJECTION 57.4mm
CLEARANCE 38mm
COMING SOON
Lever Handles
740 Series
The 740 Series is a high quality, cost effective range of round rose door furniture suitable for commercial and domestic applications. Levers are fitted on a 65mm round rose projecting 12mm from the door. This series has been designed for use with Kaba mortice locks and latches but is also compatible with similar locks and tubular latches.
740-30 DIMENSIONS
LENGTH 102mm
PROJECTION 49mm
CLEARANCE 43.4mm
102
22
740-32 DIMENSIONS
LENGTH 118mm
PROJECTION 57mm
CLEARANCE 45mm
740-33 DIMENSIONS
LENGTH 113mm
PROJECTION 64mm
CLEARANCE 43mm
740-36 DIMENSIONS
LENGTH 113mm
PROJECTION 53mm
CLEARANCE 45mm
118
24
113
15
Page 4
65
49
27
43.4
21.7 65
57
2925.3
45.0
65
6443.0
37
21
113
16
45
26
65
53
Plate Furniture
Our 100 and 600 Series are suitable for all levers stated within this brochure. These plates are best suited for commercial applications due to their hard wearing design and features. Available in a square end 600 Series and round end 100 Series to compliment the modern architectural design of Kaba lever handles. The levers are mounted on a 165mm high x 44mm wide solid forged brass base plate projecting 12mm and are designed for use with Kaba mortice locks and latches but also are compatible with similar locks and tubular latches.Our N100 and N600 Series are our narrow stile plate furniture and match with our 25 Series lever only (see 270-25 for lever style) for compliance with AS1428. Constructed from forged solid brass, this series has been designed for use with the Kaba SBM Narrow Back Set Mortice latch and similar products.
N100 Series N600 Series
Kaba Australia has plate furniture available to compliment the range of compliant handles specified in the previous section. Our plate furniture has been designed for use with Australian mortice locks and latches and is available in a variety of configurations including, concealed and visible fixing, with cylinder hole and with AS1428 compliant turn snibs.
100 Series 600 Series
Page 5
Plate Furniture
Our 1500 Series of plate furniture matches with the 32 Series and 20 Series levers (see previous section). The 1500 Series plates, along with the levers used for this application are of 316 grade stainless steel.Our 2900 Series, harm minimisation and vandal resistant plate furniture matches with the 32 Series lever only (see 740-32 for lever style). These plates, along with the lever are manufactured using 316 grade stainless steel. The 2900 Series is are also available in a narrow stile, if required.
2900 Series
316SS
160
mm
160mm
1500 Series
160
mm
160mmSHOWN WITH 20 LEVER
SHOWN WITH 32 LEVER
SHOWN WITH 32 LEVER
Page 6
DA Turn Snibs
The Kaba Case Fixed Turn Snib has been designed for use of all of our plate furniture, except for the 2900 and N2900 Series.
The Kaba Surfaced Fixed DA Turn Snib is available on all our plate furniture, excluding 2900 Series and N2900 Series, as well as our round rose furniture. If a round rose is the selected door furniture, a cylinder escutcheon is required for aesthetic purposes. Please consult your Kaba catalogue to see our full range of escutcheons.
FA311 Case Fixed Turn Snib
Surface Fixed DA Turn Snib
Page 7
45.3
14.0 12.7
52.5
SHOWN ON 600 SERIES PLATE
Tafe and Wafe
TAFE
WAFE
Available in both visible and concealed fixing, our Tafe and Wafe range features a 316 grade stainless steel handle on a forged brass plate. The Tafe pulls have been designed to suit our 600 Series plate furniture (outlined previously), while our Wafe pulls suit our 100 Series plate furniture (outlined previously).
TAFE03 concealed
left hand
TAFE03 visible
left hand
WAFE03 concealed
left hand
WAFE03 visible
left hand
WAFE04 concealed
left hand
Page 8
DIMENSIONS
PLATES 180mm length 40mm width 10mm depth
HANDLE 150mm length 16mm diameter 45mm finger clearance
Pull Handles
PH5111SSS PH5111VSSS
19mm Diameter Tubular Pull Handle
Kaba Australia has a range of stainless steel pull handles that satisfy the requirements of AS1428. Pull handles are available with through fixings, visible fixings, via the use of a 40mm rose, and on plate furniture. Push plates are also available to match with our pull handle range.
PH150SSS PH220SSS PH230SSS
PH5120SSS PH5120VSSS
PH5000SSS PH5000VSSS
16mm Diameter Offset Solid Pull Handle
Handles on 300 Plate
20
3m
m
43mm35mm
115
mm
150
mm
40mm
65mm
30
0m
m
150
mm
DimensionsPlates : length - 300mm, width - 65mm, depth - 2mmHandle : PH5160 length - 150mm, diameter - 16mm, finger clearance - 43mm
Page 9
35mm
150
mm
PH5115SSS PH5115VSSS
Pull Handles
5200 Push Plate and Pull Handle on Plate
5250 Push Plate and Pull Handle on Plate
PP300 and PH300 Plate
20
3m
m
30
0m
m
43mm
100mm
PH300VSSS
DimensionsPlates : length - 300mm, width - 100mm, depth - 2mmHandle : PH5120 length - 203mm, diameter - 19mm, finger clearance - 43mm
DimensionsPlates : length - 250mm, width - 200mm, depth - 2.5mmHandle : PH5120 length - 203mm, diameter - 19mm, finger clearance - 43mm
DimensionsPlates : length - 320mm, width - 160mm, depth - 2.5mmHandle : PH5150 length - 250mm, diameter - 19mm, finger clearance - 43mm
PH5200V-25SSLPP5200V
All plates are available in visible or concealed fix and with oval cylinder hole or round cylinder hole.
20
3m
m
25
0m
m43mm
200mm
25
0m
m
32
0m
m
43mm
160mm
PH5250V-25SSLPP5250V
Page 10
Electronic Door Furniture
Kaba c-lever
Our commercial grade c-lever product is lock and cylinder independent, providing any door with a stand-alone access control system which is easy to program and operate.Kaba c-lever can be purchased complete with our MS2 mortice lock and cylinder or it can be retrofitted to an existing Australian mortice lock and cylinder. The cylinder system provides a mechanical key override and can be implemented as a master key system for added security.
Along with the mechanical door furniture listed above, Kaba Australia has a range of electronic door furniture that complies with AS1428.
Page 11
Electronic Door Furniture
The Kaba E-Flash is a residential electronic door lock available in proximity card and biometric versions. Both versions come in an Egress model, perfect for use on apartment blocks where compliance to AS1428 is necessary.The Kaba E-Flash comes with a pin code and key override as standard on all models and has a range of accessories to add to the convenience of the system.
Kaba E-Flash
EF680 EF780
Prox Card
Accessories
Mifare Card Remote Control Additional Keys Prox Fob
Page 12
Kaba Australia Pty Limited
Tel: 1300 728 088Fax: 1300 728 708
Kaba New Zealand Limited
Tel: 09 274 3341Fax: 09 274 3301
[email protected] © Copyright Kaba Australia Pty Ltd 01102-1
