AS72-E-IN-tt-hd-wr

Heying Company Alton, Iowa 51003 Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA Copyright Heying Enterprises.

Chisel Setup. No Tools Needed to switch implements from “Grooming” to “Chiseling”. The chisel is standard on all AS machines, and is used to break up hard infields. Abrasion resistant steel teeth. Chisel can be followed by the Broom and Drag Mat if desired. Pull 3 easy to remove quick pins and all implements drop away from the frame when changing setup.

Heavy Duty Steel Welded Frame.

Tongue, Hitch and Chained Hitch Pin. Hitch quickly adjusts up or down without needing tools to different tow machine drawbars. Tongue is also easy to remove for storage.

Premium Powder Coated Finish on all steel parts.

Weight Trays. Heavy Duty 1/4” Steel. Hold four large cement blocks or other material for adding weight when needed.

No-Air, No-Flat Wheels

Rear 2-Brush Smoothing Broom. Provides a smooth, well-manicured finish. Brushes mount in our exclusive

aluminum channels. Synthetic, long lasting, mildew resistant.

Drag Mat Brackets. Drag Mat is rolled up and then carried

by the brackets.

Grading-Leveling Bar. Does the heavy work when grooming infields. Cuts off high areas, mixes as it travels, and releases material into low areas where it’s needed.

Deters water puddling and helps control weeds.

Grooming Setup. The Grading-Leveling Bar attached directly to the frame for grooming infields (shown in main photo). The Smoothing Broom and Drag Mat follow behind. No Tools Needed to switch implements from the “Grooming” setup to breaking up hard infields with the “Chisel” attachment.

Over 90% of Assembly completed at the factory! Compare to many other machines that require

extensive assembly in the field.

Steel Mesh Drag Mat is standard on all AS machines. Helps smoothen the surface. Easy to remove when not needed.

Customer chooses width of mat when ordering.

“On-Board Electric Lift System” with Wireless Remote Control. The On-Board Electric System allows the user to pull the AS72 with any towing machine.

No wiring required to user tow machine(s). System complete with Heavy Duty (hd) Electric Cylinder, Full Size 12 Volt Battery, Metal Battery Tray, Plastic Battery Case, Battery Charger,

Low Battery Monitor, Manual Override Tools, and our exclusive Wireless Remote Control.

Heavy Duty 12v Electric Cylinder

Pg. 1

AS72-E-IN-tt-hd-hw

Heying Company Alton, Iowa 51003 Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA Copyright Heying Enterprises.

Chisel Attachment. No Tools Needed to switch implements from “Grooming” to “Chiseling”. The chisel is standard on all AS machines, and is used to break up hard infields. Abrasion resistant steel teeth. Chisel can be followed by the Broom and Drag Mat if desired. Pull 3 easy to remove quick pins and all implements drop away from the frame when changing setup.

Heavy Duty Steel Welded Frame.

Tongue, Hitch and Chained Hitch Pin. Hitch quickly adjusts up or down without needing tools to different tow machine drawbars. Tongue is also easy to remove for storage.

Premium Powder Coated Finish on all steel parts.

Weight Trays. Heavy Duty 1/4” Steel. Hold four large cement blocks or other material for adding weight when needed. No-Air, No-Flat Wheels

Rear 2-Brush Smoothing Broom. Provides a smooth, well-manicured finish. Brushes mount in our exclusive

aluminum channels. Synthetic, long lasting, mildew resistant.

Drag Mat Brackets. Drag Mat is rolled up and then carried

by the brackets.

Grading-Leveling Bar. Does the heavy work when grooming infields. Cuts off high areas, mixes as it travels, and releases material into low areas where it’s needed.

Deters water puddling and helps control weeds.

Grooming Setup. The Grading-Leveling Bar attached directly to the frame for grooming infields (shown in main photo). The Smoothing Broom and Drag Mat follow behind. No Tools Needed to switch implements from the “Grooming” setup to breaking up hard infields with the “Chisel” attachment.

Over 90% of Assembly completed at the factory! Compare to many other machines that require

extensive assembly in the field.

Steel Mesh Drag Mat is standard on all AS machines. Helps smoothen surface. Easy to remove when not needed. Customer chooses width of mat when ordering.

“HW” Hard Wired version uses your tow machine’s 12v battery to power the electric lift. “HW” wiring package complete with dash-mount rocker

switch, wiring, connectors, fittings & protective sleeve to be installed on user’s 12v tow machine. Wiring installation required on user tow machine.

For machines other than 12v user must supply voltage converter.

Heavy Duty 12v Electric Cylinder.

Pg. 2

AS72-M-IN-tt-xx-mn

Heying Company Alton, Iowa 51003 Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA Copyright Heying Enterprises.

Chisel Implement. No Tools Needed to switch implements from “Grooming” to “Chiseling”. The chisel is standard on all AS machines, and is used to break up hard infields. Abrasion resistant steel teeth. Chisel can be followed by the Broom and Drag Mat if desired. Pull 3 easy to remove quick pins and all implements drop away from the frame when changing setup.

Heavy Duty Steel Welded Frame.

Tongue, Hitch and Chained Hitch Pin. Hitch quickly adjusts up or down without needing tools to different tow machine drawbars. Tongue is also easy to remove for storage.

Premium Powder Coated Finish on all steel parts.

Posi-Lock Manual Lift Control System. Manual lift & lock holds Implements in their engaged position while grooming or breaking up infields & locks them

into a raised position when traveling off the field. After a lock position is chosen with the lift arm fine depth adjustments are made using the Turnbuckle.

Weight Trays are heavy duty 1/4” steel and hold four large cement blocks, or other materials, for adding weight when desired. No-Air, No-Flat Wheels

Rear 2-Brush Smoothing Broom. Provides a smooth, well-manicured finish. Brushes mount in our exclusive

aluminum channels. Synthetic, long lasting, mildew resistant.

Drag Mat Brackets. Drag Mat is rolled up and

then carried by the brackets.

Grading-Leveling Bar. Does the heavy work when grooming infields. Cuts off high areas, mixes as it travels, and releases material into low areas where it’s needed.

Deters water puddling and helps control weeds.

Grooming Setup. The Grading-Leveling Bar attached directly to the frame for grooming infields (shown in main photo). The Smoothing Broom and Drag Mat follow behind. No Tools Needed to switch implements from the “Grooming” setup to breaking up hard infields with the “Chisel” attachment.

Over 90% of Assembly completed at the factory! Compare to many other machines that require

extensive assembly in the field.

Steel Mesh Drag Mat is standard on all AS machines. Helps smoothen the surface. Easy to remove when not needed.

Customer chooses width of mat when ordering.

Turnbuckle

Pg. 3

New for 2013 - Model Numbers changed to AS72. The AS72 All Star Groomer was formerly our AS58. This machine was originally designed as only a

Chisel Machine, and the chisel implement was 58 inches wide, thus the number “58”. It did not originally have any other ball field grooming implements (Grading Bar, Broom, etc.). Over the years however we have

added implements for grooming which are now standard equipment. The grooming implements are 72 inches wide so the number “58” has not made sense in the model numbers for quite some time.

It will now be Model AS72.

Heying Company Alton, Iowa 51003 Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA

Copyright, Heying Enterprises.

Pg. 4

“hd” Cylinder Speed: Full stroke in 8 seconds.

“HW” Wiring package complete with “hd” Heavy Duty 12v Electric Cylinder, Dash Mountable Rocker Switch,

Wire, Fuse, Fuse Holder, Connectors, & Protective Wire Sleeve.

Requires wiring assembly to user tow machine (12 volt).

Heavy Duty Connectors.

12v battery shown for reference only and represents user’s tow machine battery.

Note: HW system wiring should be performed by a qualified professional. HW systems are intended to have 12 volt power supplied by the user’s tow machine. For tow machines other than 12 volt user responsible for providing a voltage converter.

Rocker Switch. 4 Contact. Mom-ON-off-Mom-ON.

Fits dash cutout hole range of: .820” to .830” wide X

.142” to .148” high.

Battery Charger included. Plugs into a standard 110v cord.

Our exclusive Low Battery Monitor Is included. Audible beep sounds when the battery voltage drops to unsafe level.

“WR” Electric Lift System is completely “on-board” providing the flexibility of being able to tow the MG72 with a variety of towing machines.

Complete with “hd” Heavy Duty 12v Electric Cylinder, Wireless Remote Control, Metal Battery Tray, Plastic

Case, Full size 12v Battery, Battery Charger, Low Battery Monitor and wiring.

No wiring required to user tow machine.

The “original” Manual Lift version utilizes our exclusive “Posi-Lock” Lift and Hold Manual Lift.

“hd” Cylinder Speed: Full stroke in 8 seconds.

Wireless Remote Control - the ultimate in flexibility.

Posi-Lock Manual Lift Control System. Manual lift & lock holds implements in their engaged position while grooming or

breaking up infields. After a lock position is chosen with the lift arm fine depth adjustments are made using the Turnbuckle.

When traveling on and off the field this system also locks the implements into a raised carrying position.

Heying Company Alton, Iowa 51003 Ph. 712.756.8847 Fax 712.756.8849 www.HeyingCompany.com Made in USA

Copyright, Heying Enterprises.

Pg. 5