Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
344 Bloor St. West, Unit #607, Toronto, ON Canada M5S 3A7
www.lprglobal.com / www.uskoreahotlink.com
Tel. +1 416 – 423 – 5590
E-Mail [email protected]
Assembly Solutions:
Nutrunner &
Servo Press
Introduction
Servo Press & Nutrunner
Application
Automobile
Engine Part Manufacturing
Engine Assembly
Transmission Parts
Assembly of Auto Parts
Electronics
Assembly Lines
Industrial Manufacturing
Pressing / Bolt & Nut
Assembling & Dissembling
Our Loyal Customers Include: Hyundai-Kia motors, Hyundai Mobis, LG Electronics, Dimos, Wia,
Magna Power train, Hyundai Powertech, Renault-Samsung motors, Dongnam Precision, Myunghwa
Industry, Soosung Precision Machinery, Car Sub assembly suppliers
Our Servo press and Nutrunner can be
applied to all industrial markets- Automobile,
Electronics, etc.
With years of experience and abundant know-
how, we can provide turn-key production
systems which respond to our client's
engineering requests.
We will be your ideal partner in providing
superior design, production, and final
installation for your applications.
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Product Offering
Product
Product Offering
1. Nutrunner
2. Servo Press
3. Centering Unit
4. Servo System & Linear Robot
5. Loadcell & Transducer
Automation
1. Design
2. Machining and Manufacturing
3. Assembly and Installation
4. Test Run
5. Additional Parts upon request
3-Axis (Servo Press, Nutrunner, Robot)
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Linear Robot
Centering Unit
I/O or Communication
Main Function
Tight Contact Press
We have developed the most advanced and robust pressing method for part assembly.
The method significantly reduces equipment break down which in turn decreases
production down time significantly while improving part quality.
Load Pressure – Conventional Pressing Method (Not Recommended)
1. Force is applied when the press is not aligned properly with a part.
→ There is no way to make sure that the part is loaded properly
→ This can damage the part or the press; causing defects and
decreasing the life of the equipment.
2. Load tolerance detection is not precise
→ Force is applied without detection, creating a higher chance of
damaging the parts
→ As long as the tolerance level is within +/-0.15, the inspection
system will not identify a defect when it is created.
3. As the press is applying a significant amount of force, it can quickly
generate large amounts of scrap.
Pressure required is between 500 - 700 KGF; however, 1,500 KGF is used.
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Main Function
Tight Contact Press
2
1 3
1
1
2
2
3
3
4
4
Final OK. Load. Location OK
(In fact, the final pressed Position is too shallow)
Position : 081.413 Load : 465.000
Position : 081.460 Load : 465.000
Position : 081.380 Load : 465.000
Position : 081.315 Load : 253.000
Position : 081.215 Load : 253.000
Position : 081.248 Load : 230.000
Adhering Pressure Final OK.
Load Pressure
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Adhering Pressure – Our Pressing Method (Recommended)
1. Detects initial and final press position.
2. Final position’s load pressure is lower.
→ Increases the durability of the equipment
→ Prevents deformation of the material
3. Controlled press force that can detect when the press cycle is not
completed which is typically very difficult to determine.
4. Right amount of pressure is used for the OD tolerance and the ID
tolerance.
5. Detects defects from destruction of the tooling or from friction.
6. Detects defects in the parts or the inserting material.
Multi – Functional System Layout
Our Servo press & Nutrunner are designed for convenient multi-function systems. It will
provide you the most simple system connection without I/O hard wiring. By simply
connecting I/O to the master unit, it can be easily connected to the several slaves without
any further electrical wiring works.
Power 100 - 220V
50 - 60Hz
Parameter Setting &
Data Managing PC
PLC
I.O &
Communication
Monitor
Motor
Loadcell
Reducer Multi Connection
Multi Connection
n
n
Reducer
Motor
Transducer
Main Function
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Controller
Master Controller
With easy operation coupled with high efficiency,
our controllers consist of two CPUs and high
performance memory. One CPU is for servo
motion, the other for data processing.
With a display of motor loads, press speed and
details of error type, it is easy to understand
current status of the press unit.
MP(N)S-MC040
MP(N)S-MC040
112.5
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Model Drawing
MPS-001-100
0.1Ton/150ST
MPS-005-100
0.5Ton/100ST
MPS-010-100
1.0Ton/100ST
MPS-030-100
3.0Ton/100ST
Servo Press Specification
Straight Type
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Servo Press Specification
Model Drawing
MPS-050-100
5.0Ton/100ST
MPS-060-100
6.0Ton/100ST
MPS-070-100
7.0Ton/100ST
MPS-010-100
10Ton/100ST
Straight Type
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Model Drawing
MPSU-005-100
0.5Ton/100ST
MPSU-070-100
7.0Ton/100ST
Our servo press model varies from 0.1 Ton to 10 Ton capacity.
All the Straight type presses have equivalent specifications to the U-Gear type.
If you have a special need, all of our presses can be customized.
Servo Press Specification
U-Gear Type
10
422
65
24
357
259
?75
24
?66
-0.0
1-0.0
29
20t
AN120-M5(SMC)
?15
+0.0
2 0
6
74
E2S-W22
AN120-M5
(SMC)
182.5
MOVICO
SERVO PRESS
15
85
100
42.5
CMM71-1A-T1
?120
34
560
125 435
365 70
33110
15
50t
120
250
?25
+0.0
2 0
6
CM62-T5?108
0 -0.0
4 MOVICO
SERVO PRESS
MPSU-D070-150
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Other Company Our Products
Compensation
Installation
3-Dimensional Compensation
Centering Unit
Our Centering Unit can compensate in all directions (X,Y,Z,α,β,γ) in order to press to the
exact position compared to other centering units which have limited compensation
functions.
Depending on the equipment, a Loadcell can be placed on the top or the bottom to
maximize the function of the equipment.
X,Y,Z, α,β,γ
All Direction Compensation
Horizontal Install Vertical Install
X
Z
α
β
γ
X Y
Z α
β
γ
Vertical Only Vertical, Horizontal,
All directions possible
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Centering Unit
Conventional Pressing Method
When spindle center and the material are not in alignment,
destruction of jig & fixture or the material can be caused. Also,
the material does not get placed properly, as the final pressed
position is not in the correct location.
Material and the center of spindle are not in alignment.
Centering Unit applied Pressing Method
Centering unit is moving automatically to adjust the
location and the angle of the spindle. That way, the
press force is centered with the material, and the
equipment does not get damaged as the press applies
force and completes its cycle.
The material & the center of the spindle are aligned
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Centering Unit
Center of spindle and the material are aligning. (Loadcell installed at upper position)
→ Lines do not have waves; lines are smoother. (Defects are easily detected.)
Center of spindle and the material are not aligning. (Loadcell installed at lower position)
→ Lines have waves on the graph. (It is impossible to detect defects.)
Press jig or the inserted material is jostling to make it to the right location. There’s no waves in the line. Load
pressure is lower as well.
Before Applying the Centering Unit
After Applying the Centering Unit
Figure 1.1 Figure 1.2
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Model Drawing
MNS-017M
170kg*cm
MNS-020M
200kg*cm
MNS-040M
400kg*cm
MNS-060M
600kg*cm
Nutrunner Specification
Straight Type
4-M4 TAP, THRU
?4.2 PIN HOLE
M4
M4
4-M4 TAP, THRU
?4.2 PIN HOLE
M4
M4
4-M4 TAP, THRU
?4.2 PIN HOLE
M4
M4
4-M4 TAP, THRU
?4.2 PIN HOLE
M4
M4
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Model Drawing
MNS-070M
700kg*cm
MNS-080M
800kg*cm
MNS-130M
1300kg*cm
MNS-200M
2000kg*cm
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Nutrunner Specification
Straight Type
4-M4 TAP, THRU
?4.2 PIN HOLE
M4
M4
?5.2 PIN HOLE
4-M6 TAP, THRU
?5.2 PIN HOLE
4-M6 TAP, THRU
?5.2 PIN HOLE
4-M6 TAP, THRU
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Model Drawing
MNS-250M
2500kg*cm
MNS-300M
3000kg*cm
MNS-070K
700kg*cm
Custom products are available depending on your specification needs.
Nutrunner Specification
Straight Type
?5.2 PIN HOLE
4-M6 TAP, THRU
?5.2 PIN HOLE
4-M6 TAP, THRU
?5.2 PIN HOLE
4-M6 TAP, THRU
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Model Drawing
MNO-4000K
4000kg*cm
MNO-060M
600kg*cm
Our Offset type models have equivalent specifications as Straight type models.
Additional specifications can be custom made depending on your specific needs.
Offset Type
Nutrunner Specification
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
Note : Drawings might have been modified to improve the performance of the unit. Please consult
with us before applying the unit.
Client List
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
+1 416-423–5590 / [email protected] / www.lprglobal.com / www.uskoreahotlink.com
LPR Global Inc. 344 Bloor St. West, Unit #607, Toronto, ON Canada M5S 3A7
www.lprglobal.com / www.uskoreahotlink.com
TEL. +1 – 416 – 423 – 5590
Email. [email protected]
Your connection to manufacturing and industrial equipment