AUSTRALIAN INNOVATION...Model SMK2 • Is made for the DP2 Door Phone • Order SMK2-V : When the Door Phone is to be mounted vertically • Order SMK2-H : When the Door Phone is to

....YOUR PABX ACCESSORIES PARTNER

+ Message On Hold solutions for Any PABX

+ Door Station solutions for Any PABX

+ Automatic Call Attendant - Call Processor

+ Call Recording for Any PABX Handset

+ PABX Fax Switch and Modem Switch

+ Paging Switches to connect a PA System

+ Privacy Switch and Eftpos Switches

+ Ring Indicator connects a Siren, Light or Loud Ringer

Innovative PABX Accessoriesfor Any PABX System

AUSTRALIAN INNOVATION

YOUR PABX ACCESSORIES PARTNER2 YOUR PABX ACCESSORIES PARTNER DESIGNED AND MANUFACTURED IN AUSTRALIA • TWO YEAR FACTORY WARRANTY

DMC Digital Message on Hold playerOur Australian Made DMC Digital Message Centre has been Australia’s best selling On Hold player since 1999. Over that time they have established a reputation for excellent performance and extreme reliability.

We are please to provide details of our 3rd Generation DMC device, with a number of completely unique options that have been specifically developed for today’s market.

Model DMC4 Standard Message On Hold player

DMC utilises our well proven MP3 engine and High Quality Amplifier to provide the ideal solution for Message On Hold applications. It is specifically designed to provide extreme operational reliability over a typical product life of 10-15 years.

DMC will continuously play one or more MP3 Message files that are loaded onto a standard SD Flash Card, from the moment power is connected. A 2GB Flash Card is provided which will allow for 1 or more Messages up to 2000 minutes of message duration.

A professionally recorded ’Royalty Free Generic Message’ is pre-loaded on the supplied SD Card, which is suitable for use by all customers as a temporary or permanent Message. This 4 Minute Generic Message uses both Male and Female voice professionals, that provide a number of generalised Messages to callers on Hold.

A professionally recorded ’CUSTOM Message’ can be created by any one of the large number of Message On Hold production companies that use our DMC and emailed direct to you or your customer for transfer to the supplied SD Flash card.

ACCESSORIESLine Isolation Unit

A High Quality and Ultra Reliable Line Isolation Unit with a 3.5mm Audio input is available for use with DMC.

LIU1 has an RJ (6 pin) plug, with a removeable 605M for use with MOST Telephone Systems.LIU3 has a 3.5mm Audio Plug for connection to the Telephone System. LIU4 has an RCA Plug for connection to the Telephone System.LIU5 has an RJ45 Plug specifically wired for Alcatel Telephone Systems.

SD Card Read/Write Programmer

A High Quality SD Card Programmer is available to allow for quick & easy transfer of MP3 files to the SD Flash Card.

Message On Hold devices for any Business Telephone System

YOUR PABX ACCESSORIES PARTNERYOUR PABX ACCESSORIES PARTNER DESIGNED AND MANUFACTURED IN AUSTRALIA • TWO YEAR FACTORY WARRANTY 3

ALTERNATIVE MODELSModel DMC5 Message On Hold with Encryption

DMC5 incorporates all of the new features of our DMC4 device and in addition provides our popular message Encryption facility. It is inexpensive, quick and easy to use. Our Encryption prevents unauthorised copying and use of message productions. The supplied Encryption program will Encrypt a typical MP3 file in less than 15 seconds.

Our DMC5 device will only play Encrypted MP3 files and these files, if copied cannot be used in any device other than a Natcomm Encryption play device.

DMC5 is also designed to work with our Email Message Update program. This program simplifies the process of transferring Message update files from your PC to the Flash Card and is ideal for those customers that are not PC experts. Our program will:

1) Identify the PC drive letter of the built in or external card programmer 2) Delete the old message on the Flash card 3) Automatically transfer the new message to the Flash card

These steps are performed automatically, by simply double clicking the attachment in the email. It also encrypts the file at the same time it saves it to the card.

Model DMC6 Time Programmable Message On Hold

DMC6 incorporates all of the new features of our DMC4 device and in addition provides an Intelligent Real Time Clock accessory, which will automatically play specified Messages at different times of the day, days of the week, or for special periods such as Christmas Holidays.

DMC6 can also be set to stop play at the expiration of a rental contract, ready to start play again after a contract has been renewed. Timetable instructions for DMC6 are quickly and easily set up using our supplied Dealer Control program.

DMC6 can also incorporate our Encryption facility at No Extra Charge.

Model DMS Message On Hold with After Hours Announcement

Our unique DMS Digital Message Centre has been designed to provide your customers with a combined After Hours Announcement and Message On Hold solution.

DMS Provides message on hold (as with DMC 4) during office hours.DMS answers all after hours calls and plays a high quality message of any duration to callers. DMS connects to both an LIU and also the connection which is normally used for an Answering Machine.


Door Stations for any PABX

PABX Door Phone Intercom Solutions Line Trunk ConnectionOur DS1, DS2, DS3 and DS6 Model DOOR STATION controllers are designed to connect to an unused analogue Trunk Input of any PABX system. They can also be fitted to a trunk with a PSTN line connection. In this application the DS door station controller connects to a telephone line immediately ahead of the PABX telephone system. The last line is normally selected.

You can then connect ONE or TWO of our range of surface mount or flush mount DOOR PHONES direct to the DOOR STATION controller. The door phones can be up to 300 metres from the door station controller.

When the call button of a door phone is activated, the controller will ring the attached telephone line. Upon answer communication is loud and clear, just like a phone call and there are NO call charges, unless the call is routed to an external number.

Model DS2 incorporates an internal relay which can be used to open or release a door or gate lock. Lock release time is fully programmable.

Models DS3 and DS6 provide two internal relays which can be used to open locks in two separate areas. The second relay in both these models can alternatively be used to SWITCH ON a light, a video camera/recorder or any other electrical device as soon as the call button is pressed on the door phone and then SWITCH THEM OFF after the call is complete.

Model DS6 when connected to a trunk with a PSTN connection, can also dial out to an external number when the site is unattended.

MODEL DS1• Trunk Connection• No Lock Control

MODEL DS2• Trunk Connection• Single Lock Control

MODEL DS6• Trunk Connection• Dual Lock Control• Automatic Dial Out Facility

MODEL DS3• Trunk Connection• Dual Lock Control

Door Phone

Unused Line Trunk Input

Power Adaptor Supplied

Telephone System Controller

Mai

n Li

ne

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Last

Lin

e

Incoming Telephone Lines


MODEL DS4• PABX Extension Connection• No Lock Control

MODEL DS5• PABX Extension Connection• Single Lock Control

MODEL DS6• PABX Extension or Trunk Connection• Dual Lock Control• Automatic Dialing Facility

PABX Extension

Power Supply

Door Gate Lock(Not Supplied)

12 Volt Out

12 Volt InOrange

Red

Black

Yellow

Green

Brown

PABX Door Phone Intercom Solutions Analogue Extension ConnectionOur DS4, DS5 and DS6 Model DOOR STATION controllers are designed to connect to an analogue extension of a PABX system, which can be programmed to Hot Dial.

You can then connect ONE or TWO of our range of surface mount or flush mount DOOR PHONES direct to the controller. The door phones can be up to 300 metres from the door station controller.

When the call button of a door phone is activated, our DS4, DS5 or DS6 controller will generate an off hook condition to the extension, which will then Hot Dial the door phone call as programmed.

Upon answer, communication is loud and clear, just like a phone call and there are NO call charges, unless the call is routed to an external number.

The door station controller will then terminate the call as soon as the called party hangs up.

If the PABX cannot be programmed to Hot Dial, then you should use our Model DS6 which can dial a pre-programmed internal or external number when triggered by the door phone.

Model DS5 incorporates an internal relay which can be used to open or release a door or gate lock. Lock release time is fully programmable.

Model DS6 provides two internal relays which can be used to open locks in two separate areas. The second relay in this model can alternatively be used to SWITCH ON a light, a video camera/recorder or any other electrical device as soon as the call button is pressed on the door phone and then SWITCH THEM OFF after the call is complete.


Door Phone Options

Model DP1• Surface mounting door phone• Plastic injection moulded casing• 2 Wire connectivity• Basic audio clarity and volume• Budget solution

Model DP2• Flush mounting door phone – compact size • Vertical & Horizontal Surface Mounting Kits are available (See page 7)• High Quality 316 marine grade stainless steel fascia• 4 Wire connectivity• Premium audio clarity and volume• Capacitive ‘touch switch’ activation• Available with touch switch aligned for horizontal or vertical orientation

Model DP3• Flush mounting door phone – industry standard size• Vertical & Horizontal Surface Mounting Kits are available (See page 7)• Mounting facility for a camera (camera not supplied)• High Quality 316 marine grade stainless steel fascia• 4 Wire connectivity • Premium audio clarity and volume• Capacitive ‘touch switch’ activation• Available with touch switch aligned for horizontal or vertical orientation

Model DP4• Flush mounting door phone – industry standard size• Vertical & Horizontal Surface Mounting Kits are available (See page 7)• Incorporates a low light, high resolution CCD colour camera • High Quality 316 marine grade stainless steel fascia• 4 Wire connectivity• Premium audio clarity and volume• Capacitive ‘touch switch’ activation• Available with touch switch & camera aligned for horizontal or vertical orientation

Model DP5• Flush mounting door phone – industry standard size• Vertical Surface Mounting Kit is available (See page 7)• Incorporates an integrated touch sensitive pedestrian access keypad • High Quality 316 marine grade stainless steel fascia• 4 Wire connectivity• Premium audio clarity and volume• Capacitive ‘touch switch’ activation• Available in vertical orientation only

(H) 132 mm(W) 100 mm

(H) 107 mm(W) 204 mm

(H) 130 mm(W) 264 mm

(H) 264 mm(W) 130 mm

(H) 264 mm(W) 130 mm


Door Phone Accessories

Surface Mounting KitsStainless Steel Surface Mounting Kits, with rain deflector are available for all DP2-DP5 door phones.

Model SMK2 • Is made for the DP2 Door Phone • Order SMK2-V : When the Door Phone is to be mounted vertically • Order SMK2-H : When the Door Phone is to be mounted horizontally

Model SMK3 • Is made for the DP3, DP4, DP5 Door Phones • Order SMK3-V : When the Door Phone is to be mounted vertically • Order SMK3-H : When the Door Phone is to be mounted horizontally

Door Phone Covers Are available for all door phones and are recommended whenever a flush mounted door phone is exposed to direct rain.

Model DPC1 • Is made for the DP1 door phone which is always mounted vertically

Model DPC2 • Is made for the DP2 Door Phone • Order DPC2-V : When it is to be mounted vertically • Order DPC2-H : When it is to be mounted horizontally

Model DPC3 • Is made for the DP3, DP4, DP5 Door Phones • Order DPC3-V : When it is to be mounted vertically • Order DPC3-H : When it is to be mounted horizontally

Wall Mount Boxes Are available for all flush mount door phones and are designed to make installation quicker and easier.

Model WMB2 • Is made for the DP2 flush mount door phoneModel WMB3 • Is made for the the DP3, DP4, DP5 flush mount door phones

ADSL FiltersWhere ADSL is used on the same line, it is important that you fit a high quality ADSL filter ahead of your door station controller unit (and security alarm if used). There are 2 models that we recommend :

Model C10-1 ADSL Filter SplitterSuitable for sites with few (up to 4) telephone devices connected to the line

Model C10-2 Central Style ADSL Filter SplitterRecommended for sites with numerous telephone devices connected to the line and or a security alarm system

(W) 190 mm(H) 85 mm(D) 40 mm

(W) 225 mm(H) 93 mm(D) 40 mm


PABX Call Attendant / Call Processor / Call Announcer

Our AAD Automatic Announcement Devices are designed to answer incoming telephone calls and play a High Quality Message Announcement to callers. After playing a Message, these devices can then :

• Hang Up• Re-Ring the Telephone Line so that you can take the call• Hook Flash and Dial a user programmed number (Model AAD2 only)• Respond to a DTMF input and transfer the call accordingly (Model AAD2 only)

These devices are ideal for applications such as:

• Providing telephone line information services• Advising callers that their call may be recorded before their call is connected• Advising callers of a new telephone number before their call is connected• Providing after hours announcements and information• Automatic Call Attendant for Multi-line telephone systems (Model AAD2 only)• Automatic Call Processor, sending calls to appropriate extensions (Model AAD2 only)

There are 2 models in our range :

Both AAD models incorporate our popular MP3 based Digital Message Centre technology, which provides for exceptional quality Message Announcements.

They also use an SD Flash Card to store messages, allowing for quick and easy Message change.

Model AAD1 Is designed to connect to an Analogue telephone line before the PABX, for applications such as :

• Advising callers that their call may be recorded, before connecting to the PABX • Advising callers of a new telephone number, before connecting to the PABX• Providing after hours announcements and information (when connected to an analogue extension)

Model AAD2 Is the ideal solution for Multi Line businesses that require a device to answer an incoming call when they are unable to. It is designed to connect to an Analogue extension and will :

• Answer incoming calls that are sent to the extension• Play a Greeting Announcement to the caller• Hook Flash to place the telephone call On Hold• Send the call to a Telephone Extension or Extension Group to be answered• Send calls to specific Extensions or Extension Groups on detection of a callers DTMF entry

Automatic Announcement Device


AAD2 is extremely powerful and offers the following operational modes :

Mode 1 Play Message and then Hang UpMode 2 Play Message and then Ring the attached TelephoneMode 3 Play Message, Hook Flash and then Hang UpMode 4 Play Message, Hook Flash, Dial a preset number and Hang Up. This is the Default ModeMode 5 Play Message and then listen for a DTMF entry after Message If No DTMF is detected, Hang Up. If DTMF is detected, Ring the attached TelephoneMode 6 Play Message and then listen for a DTMF entry after Message If No DTMF is detected – Hook Flash and Dial pre-programmed Number 0 If DTMF 1 is detected – Hook Flash and Dial pre-programmed Number 1 If DTMF 2 is detected – Hook Flash and Dial pre-programmed Number 2 If DTMF 3 is detected – Hook Flash and Dial pre-programmed Number 3 If DTMF 4 is detected – Hook Flash and Dial pre-programmed Number 4 If DTMF 5 is detected – Hook Flash and Dial pre-programmed Number 5 If DTMF 6 is detected – Hook Flash and Dial pre-programmed Number 6 If DTMF 7 is detected – Hook Flash and Dial pre-programmed Number 7 If DTMF 8 is detected – Hook Flash and Dial pre-programmed Number 8 If DTMF 9 is detected – Hook Flash and Dial pre-programmed Number 9

Installation Diagram

AAD1 Can be fitted direct to an incoming line of a PABX system

12V/1APower Supply

PABX System Controller

Incoming analogue telephone lines

VolLIUSD

Card

LINEIN 12V

LINEOUT

• The required line of the Phone System routes through AAD• An AAD can be fitted to as many lines as required

Incomming Analogue Telephone Lines

AAD1 and AAD2 can be fitted to a analogue telephone system extension


Telephone Call Recording

CRU3 is designed to allow ANY user of a Digital or Analogue Telephone Handset to Record their Telephone Calls, at a fraction of the cost of many other solutions.

CRU3 connects to the ‘Curly Cord’ of any handset, where 4 wire analogue audio is available. This means that it can also be used with conventional PSTN handsets.

CRU3 uses sophisticated circuitry, matched with a supplied CRS3 PC program to provide exceptional recording quality and flexibility.

CRU3 is the ideal ‘Personal Recording Solution’ for those applications where only certain staff need to record calls and where only some calls need to be recorded. This is often ideal for sales staff, management and administration staff. This means that individual CRU3’s need only be used by those staff that require telephone call recording, saving $1000’s for a typical business. Additional units can then be added to a business as required, in as little as 15 minutes each.

Call Recordings are started and stopped by pressing the ‘Record’ and Stop’ icons on the CRS3 Recording Software, which is always running as a minimized application. Recordings are saved as MP3 files, which reduces memory usage and facilitiates easy replay, storage and email transfer. WAV files can alternatively be selected. Recording files can be automatically saved on the local PC hard drive or on any network drive. All files are time and date stamped and can be automatically or manually named.

CRU3 also has the ability to inject ‘Recording Tones’ into the recorded call. An optional cable is required to do this together with a spare Serial or USB port on the PC.

Easy InstallationCRU3 is supplied with everything you need and can be installed in 15 minutes or less :

Long Curly Cord Supplied

AdaptorSupplied

12V Power Supply

Cable Supplied


Telephone Call Recording & Playback

Our professional Model CRU4 provides all of the capabilities of CRU3 and in addition can :

• Play an ‘Advisory Message’ to the caller before recording commences • Play back the recording or any previous recording during any telephone call • Play MP3 based files into a telephone call at any time • Has a Notes facility, which allow you to make, recall and edit notes for each recording • Record the start time, stop time and duration in the Notes facility

ADVISORY MESSAGE A custom MP3 Message can be automatically played to your callers, as soon as the Record icon is pressed, that will advise them that the call is about to be recorded. Recording will automatically commence at the end of the message. This message can be recorded directly from the handset connected to CRU4, or an MP3 file can be professionally recorded and saved within the program.

RECORDING PLAYBACK CRU4 has the ability to PLAY BACK recorded files into a telephone call. This means that you can play back the current recording to the other party as soon as you press the Stop icon, or you can play back any previous recording to a caller at any time. You can also ‘pause’ and ‘resume’ the recording or play it again by pressing the appropriate icons in the CRS 4 program.

AUDIO PLAY You can also play ANY other MP3 file during a telephone call. CRS 4 allows you to save a number of MP3 recordings within the program which can be selected and played to a caller at any time. This means that you can play important pre-recorded scripts such as Refund policies, Cancellation policies, Warranty policies, etc to callers at any time.

NOTES FACILITY The CRS4 software program has an integrated ‘Notes Facility’ where information typed within this area during a call or after the call, can be saved along with call recordings for future retrieval and display.

CALL RECORDING TIMES At the click of an icon, the CRS4 software program can also save to the Notes Facility the time that the last call commenced, ended and the duration of the call.

EASY INSTALLATION CRU4 installs just like CRU3, with the only exception being that the PC cable has an additional connector that must be connected to a USB port or Serial (Com) port. CRU4 is supplied with everything you need and can be installed in 15 minutes or less :

AdaptorSupplied

12V Power Supply

Cable Supplied

USB Port


PABX PagingSwitch

PA SWITCH PA Switch provides;

• Connection to a Public Address (PA) System from ANY PABX • PA capability for IP based PABX systems • PA capability for Cloud based PABX systems • PA capability for Remote Sites

Our PA Switches are designed to allow a Public Address (PA) system to be connected to an Analogue extension of any PABX system, so that Announcements can be made from ANY Telephone Extension at ANY time.

Making announcements over a PA System from a PABX handset is an extremely important business tool. However, not all PABX systems have the ability to do this or the cost of fitting this option to a PABX can be quite expensive. In particular, many new IP based PABX solutions do not provide for Paging facilities.

Features

Allows access to your PA system from ANY telephone extensionOperates with IP based PABX systems and Cloud based PABXWill allow access to a PA System at a Remote SiteSupplied with a High Quality Line Isolating Transformer

Two Models

There are 2 models in our range :

Model PA1 Terminates the announcement after a fixed period of time or when the user presses any DTMF digit on their handset

Model PA2 Terminates the announcement on detection of hang up tones, which occur as soon as the user hangs up

• PA2 is designed to detect standard Australian Hang Up tones and will automatically hang up after detection of the 2nd tone

• PA2 can also hang up after a fixed period of time, or silence, or when the user presses any DTMF digit on their handset

Easy Operation

Once installed, PABX users need only call the Extension Number that PA Switch is connected to and they will be able to make their PA announcement.


Installation 1) Connect the Line In port of PA Switch to any analogue extension

2) Using the supplied high quality Line Isolation Unit (LIU), connect the PA Amplifier to the PA SYSTEM port of PA SWITCH

3) Connect the supplied 12V Power Pack

4) PA Switches are pre-programmed for common applications and are therefore plug and play

A Programming port is provided on both PA Switches where a standard handset (or buttinski) can be connected

This allows PA Switch to be programmed for rings before answer, maximum call time and in PA2, Busy Tone and Silence detection parameters, using normal touch tone keys


SOURCE

SYSTEM

LIU

Line Isolation Transformer (Supplied)

Power Supply

PABX Extension

PA Amp


PABX FaxSwitch

FAXSWITCH 2For most businesses, there is no longer any need for an expensive Dedicated Fax Line.

• Fax Use is decreasing due to the increased use of Email • Telephone Line Rentals continue to increase • Telephone Line Installation Charges continue to increase

With FaxSwitch 2 you can :

• Move your Fax Line to your PABX Rotary Group to add an additional line • Cancel the existing Last Choice Line and replace it with the Fax Line

FaxSwitch 2 is specifically designed to allow a Fax Machine to Share the Last Choice line of a PABX Rotary Group (PSTN Lines only). It provides Completely Automatic Fax Reception, with 100% detection accuracy and reliability.

There is no need to change the Fax Number, as the Fax Line is now the Last Choice line.

Save over $475 per year ($39.95 per month) in unnecessary line rental alone. Save even more if a new line installation is involved.

Installation

• Connect the incoming ‘Last Choice’ telephone line to the Line In port of FaxSwitch 2 • Connect the Line Out port of FaxSwitch 2 to the PABX Trunk Input used for the ‘Last Choice’ telephone line • Connect the Fax Machine to the Fax Device port of FaxSwitch 2. Leave the Fax Machine settings unchanged • Connect the supplied 12V Power Pack and installation is complete

Operation

The only time a call will ring on the Last Choice line is when: 1) It is a Fax Call 2) It is a Telephone call, but ONLY if ALL other lines in the Rotary Group are in use

FaxSwitch 2 will answer all incoming calls on this line BEFORE the call rings on the PABX. It will then listen for a Fax Calling Tone. If the Calling Tone is detected, it will ring the Fax Machine so that it answers and then connect the Fax call to it so that it will receive the Fax transmission.

On the rare occasions that the incoming call is a Voice call, FaxSwitch 2 will ring the PABX system as normal, after a 4 second listening delay.


PABX ModemSwitch


MODEM SWITCH Some businesses require the ability to DIAL IN to a Modem based device, such as an Air Conditioner, Alarm System, Retail Cash Register, Vending Machine or ANY other device which has an analogue modem.

The need to DIAL IN is usually infrequent and the cost of using a dedicated telephone line is cost prohibitive and totally unnecessary.

Modem Switch operates in the same way as FaxSwitch 2, except that it is programmed to detect a Modem Calling Tone instead of a Fax Calling Tone.

When used on a PABX, Modem Switch connects in the same manner as the FaxSwitch 2 and the dial in Modem Number is simply the telephone number assigned to the Last Choice Line.

Modem Switch can also be used on a Fax Line, EFT-POS line or any other available telephone line. The normal use of the line remains unaffected.


Fax Machine

Mai

n Li

ne

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Last

Lin

e

Telephone Handsets

Telephone Handsets



INSTALLATIONFit Fax Switch 2 to the existing LAST LINE of the PHONE SYSTEM or move the Fax Line into the rotary group, to add an additional Voice Line. You still keep the existing Fax Number.


RING INDICATOR • Advises PABX users, in NOISY environments, when there is an incoming call• Easy ‘Plug In’ Installation • Simple, Cost Effective and Reliable

Ring Indicator Switch is designed to connect to an Analogue Extension of a PABX and to cause a Siren, Horn, Lights or any combination to operate whenever there is an incoming call. It can control the attached electrical device(s) to Turn ON and OFF in sequence with the incoming ring, or it can Turn the device(s) ON and leave then ON until the call is answered.

Ring Indicator Switch has an internal relay which will Close on detection of ring and and Open when the ring ceases. The relay is rated at 12V/1A and can be used to directly control an electrical device which operates on 12V (such as our optional Siren Accessory). A connection box with screw terminals that connects to the 4 pin RJ socket outlet of Ring Indicator is also supplied.

If the Electrical equipment to be used operates at 240V, then our optional Power Control Unit accessory should be used. It connects direct to the 4 pin RJ socket outlet of Ring Indicator with a supplied curly cord cable. The Power Control unit has a standard 240V plug which connects to an electrical socket and a standard 240V socket, which connects to the electrical device(s). Ring Indicator then causes the Power Control unit to CONNECT and DISCONNECT 240V power to the Electrical device, matching the incoming ring. Alternatively, power can be connected to the Electrical device(s) on detection of the first ring and only disconnected when the call is answered.

Siren AccessoryAs used with Security Alarms. Outputs 110dB, which is suitable for a small factory. This accessory is supplied with volume control adaptor.

Power Control Unit AccessoryControl up to 10A of electrical current. Suitable for any business size.

Can connect any 240V device such as a loud siren, horn or lighting system which will switch ON then OFF to advise of an incoming telephone call.

Use Model PCU-2 (which is normally OFF). Alternative Model PCU-1 (which is normally ON) is not suitable for this application.

PABX RingSwitch


Installation DiagramThe Power Control Unit Accessory should be used to control 240V Accessories for large factory areas

Installation DiagramThe Siren Accessory can be fitted direct for use in small factory areas


PABX PrivacySwitch

PRIVACY SWITCH Privacy Switch is designed to allow a DIAL OUT only device to share a Telephone Line of a PABX. Although this would normally be the Last Choice Line, it can be used on any PABX line. Incoming calls are directed to the normal destination without delay or answer. Outgoing calls can be made by both the NORMAL DEVICE and the ACCESSORY DEVICE.

Privacy Switch is ideal for connection of :

• An Alarm System • Dial Out only Modem Device such as a Vending Machine, Electronic Till or Time Clock • Pay Phone • Any other Dial Out only device

Barge-In protection ensures that the PABX or Accessory device, when connected to the Telephone Line, cannot be interrupted by the other device.

Installation

1. Connect the ‘Last Choice’ telephone line to the Line In port of Privacy Switch

2. Connect the Line Out port of Privacy Switch to the PABX Trunk Input

3. Connect the Accessory device to the Accessory port of Privacy Switch

4. Connect the supplied 12V Power Pack

Operation

1. Incoming calls connect to PABX as normal, without delay or answer

2. Outgoing Telephones calls can be made by either the PABX or Accessory device

3. Barge-In protection ensures only one device can connect to the line at one time

Telephone Syste m Controller

Mai

n Li

ne

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Last

Lin

e

Telep hone Handset s


Incoming Tel ephone Li nes

Fax Machine

1 2 3

4 5 6

7 8 9

* 0 #

Modem



PABX EftposSwitch

EFT-POS SWITCH EFT-POS Switch operates in the same way as PRIVACY SWITCH, with the exception that it provides full Telephone Line Voltage to the EFT-POS at all times, which is a requirement of EFT-POS Devices

• Incoming calls are directed to the normal destination, without delay or answer • Outgoing calls can be made by both the PABX and the Eftpos Device • Barge-In protection ensures that the PABX or Eftpos, when connected to the Telephone Line, cannot be

interrupted by the other device

Installation

1. Connect the ‘Last Choice’ telephone line to the Line In port of Eftpos Switc

2. Connect the Line Out port of Eftpos Switch to the PABX Trunk Input

3. Connect the EFT-POS device to the EFT-POS Device port of Eftpos Switch

4. Connect the supplied 12V Power Pack

Operation

1. Incoming calls connect to PABX as normal, without delay or answer

2. Outgoing Telephones calls can be made by either the PABX or Eftpos device

3. Barge-In protection ensures only one device can connect to the line at one time


Mai

n Li

ne

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Addi

tiona

l Lin

e

Last

Lin

e

Telephone Handsets



Eftpos Device


Innovative PABX Solutions Message On Hold Since 1999, our DMC brand Digital Message Centre devices have been Australia’s best selling Message On Hold players and they have established a reputation for exceptional performance and reliability. Our DMC devices are offered with the widest range of options available, to ensure that our Resellers can meet any customer requirement. See pages 2-3

Message On Hold with After Hours Announcement Many businesses also want to provide an informative After Hours Announcement for their callers. Our DMS device allows for a professionally produced message, of any duration, to be played to all after hours callers. See page 3 Door Station SolutionsA comprehensive range of Door Phone Intercoms are offered, which connect to Controller units that can be fitted to an Analogue Extension or an Analogue Trunk Input. The Door Phones can be both Surface Mounted and Flush mounted and all are offered with optional Rain Covers. Lock/Strike control is offered for 1 or 2 zones as is an integrated Keypad that allows for authorised Pedestrian Access. See pages 4-7

Automatic Call Attendant / Call Processor Our Automatic Announcement device is designed to connect to an Analogue Extension of ANY PABX. When calls are directed to it, it will play an MP3 based greeting message (stored on an SD card) to the caller and will allow them to make selections or just hold before being routed to other programmed extensions of the PABX. See pages 8-9 Telephone Call Recording and PlaybackUnique, Low Cost Call Recording devices are offered, which connect direct to a users Handset and allow for High Quality Telephone call recordings to be saved to a PC or Networked drive. This cost effective solution is ideal for sites that do not require all users to record calls. Supplied PC software allows for powerful ‘personal control’ of recordings. See pages 10-11

PABX Paging SwitchOur Paging Switches will allow you to to connect any PA system to your PABX equipment. Users can then make pages, by simply calling a specified extension. Paging Switches hang up on detection of ‘Australian Hang Up Tones’, Silence, DTMF or a fixed time. See pages 12-13

PABX FaxSwitchFax use has dropped dramatically in recent years, but the costs of operating a dedicated line keep increasing. Our Faxswitch provides for a 100% reliable solution that will save your customers a great deal of money. A PABX Modem Switch is also offered. See pages 14-15

Ring Indicator SwitchRing Indicator Switch is designed to Switch ON and OFF a 12V or 240V electrical device, to alert you that there is an incoming call. 240V devices require use of the PCU-2 Power Control Unit accessory. See pages 16-17

Privacy SwitchPrivacy Switch is designed to allow a DIAL OUT only device, such as an Alarm Panel, Electronic Till, Vending Machine, Time Clock, Payphone or any other device which incorporates a Modem, to Share an incoming analogue line of a PABX. See page 18

Eftpos SwitchEftpos Switch is designed to connect an Eftpos device to an incoming analogue line of a PABX so that the line can be shared. See page 19

Designed and Manufactured in AustraliaPhone (07) 5596 5128 Fax (07) 5596 5121 Email [email protected] Web www.natcomm.com.au

Units 11-12/39 Lawrence Drive Nerang Queensland 4211

AUSTRALIAN INNOVATION

Documents

AUSTRALIAN INNOVATION...Model SMK2 • Is made for the DP2 Door Phone • Order SMK2-V : When the Door Phone is to be mounted vertically • Order SMK2-H : When the Door Phone is to