Autocad 2010 Demo

8/6/2019 Autocad 2010 Demo

1/48

AutoCadAutoCad 20102010Guide for Highway GeometricGuide for Highway Geometric

ProjectProject


2/48

1:Create Surface1:Create Surface SurfaceSurface--createcreate

surfacesurface--make suremake sureto change name toto change name toxxxxx_yournamexxxxx_yourname--

Click OkClick Ok


3/48

Layer ManagerLayer Manager

Turn off all layersexcept Intermediate

and Index (OrangeAve)

How to do this?

Right click light bulb

Click Select all

Turn all bulbs off

Turn on bulbs forlayers listed above(INTERMEDIATE /

INDEX)TIP: Can also access the layer

manager by typing LAYER

in thecommand line


4/48

ViewView

ViewView-- ToolspaceToolspace SurfaceSurface--Surface_yournameSurface_yourname--

Definition_ContoursDefinition_Contours RightRightclick addclick add--OKOK-- Select allSelect allcontours right click.contours right click.


5/48

Turn on All Layers!Turn on All Layers!How to do this?

Click on lightbulb

Right click,select all

Turn all bulbs

on


6/48

2: Create Alignment2: Create Alignment

AlignmentAlignment--alignmentalignmentcreation toolscreation tools--Name asName asAlignment_ your nameAlignment_ your name

Click on Design CriteriaClick on Design Criteriatabtab

change to speed ofchange to speed ofyour choiceyour choice

click use criteria basedclick use criteria baseddesigndesign

Uncheck use designUncheck use design

criteria.criteria.


7/48

Alignment layout toolAlignment layout tool

First tool on the barFirst tool on the barClick Curve and spiralClick Curve and spiralsettingssettings Click SpiralClick SpiralType of Your choiceType of Your choice

Add radius of yourAdd radius of your

choicechoice First toolbarFirst toolbar TangentTangent

-- Tangent with CurveTangent with CurveDraw your alignmentDraw your alignment


8/48

Sample of AlignmentSample of Alignment


9/48

3:Profile3:Profile from surfacefrom surface

ProfileProfile--Create profile from surfaceCreate profile from surface


10/48

3:Profile3:Profile from surfacefrom surface

AddAdd Click SampleClick Sampleoffsets.offsets.

list in box your valueslist in box your valuesof your choice!of your choice!

Click addClick add DrawDraw--profile viewprofile view


11/48

Change NameChange Name Click NextClick Next


12/48

Choose Automatic or userChoose Automatic or userspecified.specified.

Choose Next two moreChoose Next two moretimestimes


13/48

--Leave Center checked, butLeave Center checked, butuncheck the other twouncheck the other twosurfacessurfaces

Click Create Profile ViewClick Create Profile View Now you will be asked toNow you will be asked to

Insert profile. Please doInsert profile. Please dothis below drawing!!!this below drawing!!!


14/48

Profile from surfaceProfile from surface


15/48

4: Profile4: Profile

ProfileProfile-- Profile Creation ToolsProfile Creation Tools Click on your actual profileClick on your actual profile


16/48

Change name-design-same settings as above.


17/48

Profile layout toolsProfile layout tools--curve settingscurve settings--parabolicparabolic-- use a K value of your choiceuse a K value of your choice

Draw tangent with curves.Draw tangent with curves.

Can see Profile Grid View (On toolbar)Can see Profile Grid View (On toolbar)


18/48

Profile by LayoutProfile by Layout


19/48

5: Assembly5: Assembly

AssemblyAssembly -- CreateCreateAssemblyAssembly change namechange name

Click ok, Click on openClick ok, Click on openspacespace


20/48

Click on assembly and the toolClick on assembly and the tool

palette for assembly will appearpalette for assembly will appear


21/48

Click on Tool PaletteClick on Tool Palette


22/48


23/48


24/48

Final Product of the AssemblyFinal Product of the Assembly


25/48

6: Generating a Corridor6: Generating a Corridor

CorridorCorridor createcreatecorridorcorridor

then click enterthen click enter

(follow steps on(follow steps oncommand line)command line)

choose alignment,choose alignment,profile, andprofile, andassemblassembl


26/48

Set TargetsSet Targets


27/48

Select Click here to set all,Select Click here to set all,

then choose your surfacethen choose your surface


28/48

ChangeChangefrequencyfrequency

to 100to 100


29/48


30/48

CorridorCorridor


31/48

7: Create corridor from surface7: Create corridor from surface

RIGHT CLICK theRIGHT CLICK thecorridorcorridor-- select corridorselect corridorpropertiesproperties


32/48

Go to surfaces tabGo to surfaces tab-- click create corridorclick create corridor

surfacessurfaces


33/48

Change name toChange name to Corridor_yourCorridor_yourname_topname_top

Chose render materialChose render material

Select paving surfacing asphaltSelect paving surfacing asphalt

Select overhangSelect overhang-- selectselect toplinkstoplinks

Specify codeSpecify code-- add TOPadd TOP

Repeat for Datum, Pave, and MedianRepeat for Datum, Pave, and Median


34/48


35/48

For more detailed directions seeFor more detailed directions see

tutorial page 327.tutorial page 327.

Tutorial is found on helpTutorial is found on help


36/48

8: Create Boundary Surface8: Create Boundary Surface

Click on the corridorClick on the corridor--right click corridorright click corridorpropertiesproperties

Go to Boundary TABGo to Boundary TAB


37/48

Right Click on the Nameselect AddRight Click on the Nameselect AddAutomaticallyAutomatically-- daylightdaylight outside boundaryoutside boundary

Add outside boundary daylights to theAdd outside boundary daylights to the

Top, Datum, Pave and MedianTop, Datum, Pave and Median Click okClick ok


38/48

9: Create Sample Lines9: Create Sample Lines

SectionsSections--createcreatesample linessample lines

Change nameChange name

Go to surface, goGo to surface, go

to style, changeto style, changeto exist. Groundto exist. Ground

Change theChange thesecondsecond[standard]one to[standard]one to

all codesall codes Change rest toChange rest to

finished gradefinished grade


39/48


40/48

Sample lines continuedSample lines continued

Then on sample line tools (toolbar toThen on sample line tools (toolbar tothe top )the top )

DropboxDropbox--from corridor stationsfrom corridor stations

Left swath and right swath change toLeft swath and right swath change to150.150.

Click okClick ok


41/48

10: Create Section Views10: Create Section Views

SectionsSections-- create multiple sectionscreate multiple sections


42/48

Cross SectionsCross Sections


43/48

11: Quantity Takeoff ofVolumes11: Quantity Takeoff ofVolumes

SectionsSections -- compute materialscompute materials

Alignment and selected sl group okAlignment and selected sl group ok

Be sure quantity takeoff item is setBe sure quantity takeoff item is setto earthworkto earthwork

Click on EG under Object NameClick on EG under Object Name

set to your name surfaceset to your name surface

click on datum under object nameclick on datum under object name set to datum corridorset to datum corridor


44/48


45/48

SectionSection Generate Volume ReportGenerate Volume Report

sectionsection -- generategeneratevolume reportvolume report click okclick ok

select style sheet asselect style sheet as

earthworkearthwork can display as xml reportcan display as xml report

or notor not--click okclick ok

SectionSection--create mass haulcreate mass hauldiagramdiagram

Change nameChange name -- NextNext


46/48


47/48

Toolspace..settings,Toolspace..settings,

sectionsection labellabel

stylesstylesgradegradebreakbreakEG stations,EG stations,

right click editright click edit--

generalgeneral--labellabel-- changechangeto falseto false

12: Modifying crosssection labels tip:


48/48

The EndThe End

Questions?Questions?

Documents

Autocad 2010 Demo