Embed Size (px)
Citation preview
MicrophoneCamera
Eyes with LED lights
Loud-speaker
Lights in the bottom
Charger input
Lights on top of the head
Standby-modeIn standby-mode, AV1 has a full battery and is ready to be used. This is signalled through a weak and pulsating light at normal pace at the bottom front of AV1, a dropping head and no lights in the eyes and head.
ConnectedThis shows that AV1 streams video and sound to the user. This is visible as the head of the robot is raised, the lights in the bottom of the robot go from pulsating to lightly glowing, and because the eyes and the top of the head lights up.
AV1’s head is flashingWhen the lights on top of the head is flashing, the user is raising her/his hand and wants to say something.
AV1’s head is blueThe user prefers to pay attention to the class without actively participating.
Low batteryMeans that the battery needs charging. This is signalled through a strong and fast-paced pulsating light at the bottom of AV1. Connect AV1 to a charger immediately. Charging takes 8-10 hours, thus we recommend to charge AV1 over night to avoid having to charge during the day.
Full battery when chargingWhen AV1 is fully charged, the lights on the bottom of AV1 stop pulsating.
AV1 turned offWhen AV1 is off, the head droops and all lights are turned off. Test by inserting the charger. If it doesn’t start, something isn’t working. Check the user guide before contacting support.
You can reach support per telephone +47 908 74 495 or e-mail us at [email protected]
AV1’s statuses
