BACKHOE LOADER | 2CX

A Product of Hard Work

Stepping up a size, the next machines in the JCB backhoe family are the 2CXs:

four models offering high performance and versatility in a compact package.

Every 2CX features a powerful, self-levelling loader with high lift capacities

and breakout forces, maximising productivity, while also being able to

maintain the load level during raise and lower cycles. And for enhanced

versatility, an optional hydraulic loader quickhitch lets you switch quickly

between shovel and forks.

These machines also work hard for the operator: a ROPS/FOPS canopy or

cab provides a safe and roomy environment; exceptional visibility improves

productivity and safety; and a low-noise environment reduces fatigue.

From this superb base, each machine then offers its own unique benefits.

First, the 2CX and 2CXS boast a side-shift back-end design. Available with

either a fixed or Extradig dipper, one can maximise backhoe performance

and production with these powerful machines.

With a rear-mounted air compressor, the 2CX Airmaster can run hand-

held air-tool attachments, making roadway maintenance much easier.

The 2CX Streetmaster has an excavator quickhitch, extending dipper,

streetpads and hammer pipework as standard, allowing it to utilise its

compact dimensions effectively in the utilities markets.

The JCB hydraulic hand-held tool circuit and retractable hose reel, an

industry exclusive, can run a variety of tools including breakers, pumps, and

disc-cutters up to 9m working radius of the machine, eliminating the need

for seperate power packs, and giving huge savings in fuel and manpower.

These really are compact machines that exceed your expectations, time

and time again.

Unique compact solutions

Four-wheel steer offers excellent manoeuvrability

– turns within a single carriageway

Extradig dipper on the 2CX and 2CXS gives superior

backhoe performance

2CX Airmaster’s rear mounted air compressor

can operate a wide array of attachments

ROPS/FOPS canopy or cab enhances operator

safety and comfort

Wide variety of attachments available

BACKHOE LOADER | 2CX

Operator environmentFront sloping bonnet for excellent forward visibility

Cab heater, optional air conditioning and adjustable suspension seat keeps the operator comfortable

Engine 75hp (55kW) turbo charged four-cylinder engine (2CX, 2CX Streetmaster, 2CXS), 73hp (53.8kW) turbo charged four-cylinder engine (Airmaster)

Tier 3 compliant engine

83 litre fuel tank for reduced refuelling and day-long productivity

Pannier-mounted fuel tank for easy refilling

Loader Hydraulic quickhitch for fast changeover of attachments

Self-levelling loader arm – suitable for pallet fork work

Optional auxiliary hydraulic circuit operates an array of attachments

TyresChoice of turf, industrial or agricultural tyres to suit all applications

ExcavatorEqual length boom and dipper maximises trench length with less repositioning of the machine

Narrow boom and dipper gives superb visibility enhancing operator safety and performance

Rams and hoses are concealed within the boom for increased protection

Manual control lever for ease of operation

Single acting auxiliary circuit powers a wide range of attachments

HydraulicsGear pump hydraulics with power modulation valve matches hydraulic power to digging conditions

Integrated Hand-Held Tool Circuit (HHTC), for operating a wide range of hand-held attachments adding to the machines versatility and eliminates the need to carry around a separate power pack.

To compliment this option JCB now offers a 9m hose reel on all 2CX models with the following benefits:

• Larger working radius

• Reduced damage during storage

• Additional hose protection during storage

Transmission34kph (21mph) transmission for fast travel between sites

4-speed synchromesh transmission with powershuttle

Four-wheel drive and automatic limited slip differential for maximum traction in arduous terrain

Four-wheel steer allows the machine to turn around in the tightest of turns

BACKHOE LOADER | 2CX

2CXSUPE

R

A

B C

DE

F

G

H

K J

2CXSUPER

BACKHOE LOADER |2CX/2CX STREETMASTER/2CXS

MAX. ENGINE POWER: 55kW (75hp) MAX. BACKHOE DIG DEPTH (STANDARD DIPPER): 3.67 metres (12ft 0in)

STATIC DIMENSIONS

JCB Backhoe Loaders feature heavy-duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key.

Machine model 2CX 2CX Streetmaster 2CXS

m (ft-in) m (ft-in) m (ft-in)

A Total travel length 5.13 (16-10) 5.40 (17-9) 5.13 (16-10)

B Axle centreline distance 1.99 (6-6) 1.99 (6-6) 1.99 (6-0)

C Slew centre to rear axle centre distance 1.13 (3-8) 1.13 (3-8) 1.13 (3-8)

D Stabiliser feet clearance 0.31 (1-0) 0.31 (1-0) 0.31 (1-0)

E Kingpost clearance 0.49 (1-7) 0.49 (1-7) 0.49 (1-7)

Machine model 2CX 2CX Streetmaster 2CXS

m (ft-in) m (ft-in) m (ft-in)

F Steering wheel centre height 1.76 (5-9) 1.76 (5-9) 1.76 (5-9)

G Cab roof height 2.65 (8-8) 2.65 (8-8) 2.65 (8-8)

H Total travel clearance 2.72 (8-11) 2.72 (8-11) 3.05 (10-0)

J Rear frame width 1.85 (6-1) 1.85 (6-1) 1.98 (6-6)

K Shovel width 1.85 (6-1) 1.85 (6-1) 2.00 (6-7)

A

B

C

DD

F G

BACKHOE LOADER | 2CX AIRMASTER

STATIC DIMENSIONS

JCB 2CX Airmaster Loaders feature heavy-duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key.

Machine model 2CX Airmaster

m (ft-in)

A Total travel length 5.17 (16-11)

B Axle centreline distance 1.99 (6-6)

C Steering wheel centre height 1.76 (5-9)

D Cab roof height 2.65 (8-8)

Machine model 2CX Airmaster

m (ft-in)

E Total travel clearance 2.72 (8-11)

F Shovel width (blacktop GP shovel) 1.37 (4-6)

G Width over tyres 1.83 (6-0)

MAX. ENGINE POWER: 53.8kW (73hp)

A

B

C1

C2

BACKHOE LOADER | 2CX

GROUND LINE ANGLES ENGINE

Direct injection diesel. Belt driven water pump, cold start aid – territory dependent.

2CX

Machine model 2CX Streetmaster 2CX Airmaster

2CXS

Engine emissions Stage III Stage III

Manufacturer JCB JCB

Aspiration Turbo charged Turbo charged

Displacement litre 4.4 4.4

No. of cylinders 4 4

Bore mm 103 103

Stroke mm 132 132

Rated engine rpm 2200 1900

Power ratings

Rated ISO 14396 (SAE J1995 Gross) kW (HP) 55 (75) 53.8 (73)

Maximum torque

Rated ISO 14396 (SAE J1995 Gross) Nm (lbf ft) 329 (243) 329 (243)

Max. torque rpm 1200 1200

Full power hydrostatic system utilising the main hydraulic pump with integral steering priority valve. In the event of engine failure, emergency steering is maintained.

Machine model

2CX 2CX 2CXS 2CX

Streetmaster Airmaster

Steering axles Front and rear Front and rear Front and rear Front and rear

Steering turns – lock to lock

4 4 4 4

m (ft-in) m (ft-in) m (ft-in) m (ft-in)

Kerb – kerb turning circle – unbraked – 4WS

6.85 (22-6) 6.85 (22-6) 7.20 (23-9) 6.85 (22-6)

Kerb – kerb loader clearance circle – unbraked – 4WS

8.71 (28-7) 8.71 (28-7) 9.35 (30-8) 8.71 (28-7)

(2000mm GP)

STEERING

ENGINE SUPPORT SYSTEM

Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals.Fuel type Diesel.Fuel filter Replaceable spin-on cartridge plus water/sediment separator.Air cleaner Dual, dry element cyclonic type.Oil filter and lubrication Full flow, spin-on type filter.Cooling system Hot climate specification, pressurised 14.5 psi (1.0 bar) suction fan. Pressurised recovery tank.

Machine model 2CX

2CX 2CXS

2CX Streetmaster Airmaster

kg (lb) kg (lb) kg (lb) kg (lb)

Weight 5900 (12980) 6300 (13860) 6150 (13530) 5890 (12958)

OPERATING WEIGHTS

A Approach angle 45°B Interference angle/ramp to ground plane 130°C1 Departure angle 27°C2 Departure angle 27°

The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximise production.

Machine model 2CX 2CX 2CXS

2CX AM

Streetmaster Airmaster

Manufacturer JCB JCB JCB JCB

Type Syncroshuttle Syncroshuttle Syncroshuttle Syncroshuttle

Torque converter 280mm (11") 280mm (11") 280mm (11") 280mm (11")

Torque converter ratio 2.67:1 2.67:1 2.67:1 2.67:1

Gears forward/reverse 4 4 4 4

Gear selection Manual Manual Manual Manual

Shuttle control – F/R Power shuttle Power shuttle Power shuttle Power shuttle

Travel speeds kph (mph) kph (mph) kph (mph) kph (mph)

Tyres – front 12.5x18

Gear 1 3.6 (2.2) 3.6 (2.2) 3.6 (2.2) 3.3 (2.1)

Gear 2 9.9 (6.2) 9.9 (6.2) 9.9 (6.2) 8.9 (5.5)

Gear 3 20.5 (12.7) 20.5 (12.7) 20.5 (12.7) 18.1 (11.2)

Gear 4 33.1 (20.6) 33.1 (20.6) 33.1 (20.6) 28.8 (17.9)

BACKHOE LOADER | 2CX

TRANSMISSION

JCB front axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations.

Machine model All models

Type JCB Max-trac steer drive torque proportioning

Axle ratings kg (lb)

Static load rating 7484 (16500)

Dynamic load rating 3765 (8300)

Oscillation angle 9.5°

Steering ram Double acting

FRONT AXLE

JCB rear axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations.

Machine model All models

Type JCB Max-trac torque proportioning with outboard planetary drive

Limited slip

Axle ratings kg (lb)

Static load rating 7484 (16500)

Dynamic load rating 3765 (8300)

REAR AXLEELECTRICAL AND INSTRUMENTATION

12 volt negative ground, utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal.Gauges Tachometer, engine coolant temp, fuel level, hourmeter clock.Warning system Audible and visual system for engine oil, transmission, park brake, battery, air cleaner, alternator.Battery 900 CCA/110 A/hr.Pre-wire Radio speakers (cab), beacon (all).Horn Controlled from both front and rear.Alternator 95 amp.Front working lights 2 twin beam fixed position.Rear working lights 2 adjustable.

• Excellent visibility (and safety) is provided by the extra large tinted glass areas. Cab frame is ROPS and FOPS approved for maximum operator protection. ISO standard 3471 and 3449 (SAE J1040 and J231).

• A fully adjustable seat with lumbar support combines with ergonomically positioned controls to minimise operator fatigue.

• The in-cab noise levels are the lowest in the business for maximum operator comfort.

• A radio location is provided as standard plus twin speakers for stereo sound.

• Cab provides easy access through a left hand single door. Standard features include: lap seat belt, 3 speed fresh air/recycle heater, front and rear screen wash/wipers (cab), front and rear horn, exterior mirrors, and flat easy-clean floor.

• The instrument panel is positioned to the right-hand side for ease of viewing from either the loading or excavating position and has an optional lockable cover for vandal proofing. Engine speed, fuel and coolant temperature gauges, (and clock on cab builds) are mounted in the panel.

• Fixed steer column.

• Large opening rear window (cab).

• Static or mechanical suspension seat gives the operator a comfortable operating position.

• 12V power supply.

CAB

The JCB braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and is oil immersed for minimum maintenance and a long operating life.

• Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground.

• Automatic compensation ensures ‘straight’ machine braking.

• Disc diameter: 165 mm (6.5 in). Friction area: 130502 sq.mm (202 sq. in) per brake.

• The independent parking brake is mounted on the input shaft rear axle and will hold the machine on 1:3 gradients. It is an over-centre type, adjustable within the cab, with transmission disconnect to prevent premature brake pad wear. Park brake disc diameter: 285 mm (11.2 in). Friction area: 74984 sq.mm (116 sq. in).

BRAKES

BACKHOE LOADER | 2CX

Machine model 2CX, 2CX Streetmaster, 2CXS, 2CX Airmaster

ltr (gal)

Cooling system 14 (3.70)

Fuel tank 83 (18)

Engine oil with filter 11 (2.42)

Transmission with filter 17 (3.74)

Rear axle 9.0 (2.0)

Front drive axle 9.0 (2.0)

Hydraulic system incl. tank 83 (18)

SERVICE CAPACITIES

The Open Centre system uses gear pumps with a power modulation valve that automatically varies hydraulic power to match digging conditions for extra performance and power.

• Open centre hydraulic system using simple and reliable high efficiency gear pump.

• Single pump system with priority valve to ensure metered supply to steering and main hydraulic system.

• Easily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing operator fatigue.

• A full flow 10 micron filter ensures that oil stays free of contaminants.

Machine model 2CX, 2CXS, 2CX Airmaster**

2CX Streetmaster

Pump flows at 2200rpm* l/min (gal/min)

Main pump output 81.0 (17.8)

System working pressure bar (lbf/sq in)

Backhoe and loader 230 (3335)

*Optimum flow**1900rpm

HYDRAULIC SYSTEM

TYRES

340/65 x R18 Goodyear340/80 x R18 Michelin XMCL12.5 x 18 x 10 Goodyear340/80 R18 Goodyear IT530

• The screw type compressor is purpose-designed for resurfacing work. It offers true 140 cubic feet per minute (66 litres per second) capacity. A heavy duty cage protect against impact damage while an automatic speed setting on the compressor ensures maximum economy by providing power on demand.

• An external stop/start facility means that the operator doesn’t have to be in the cab to engage the compressor drive. It also allows fast shutdown in an emergency.

• With the oil/air receiver only requiring an inspection every 6 years, maintenance time will be cut to a minimum.

• The compressor will only operate when the parking brake is applied. And to minimise the risk of mechanical damage, overheat sensors will disengage the compressor drive if the oil temperature rises above normal.

Type Compair Holman screw typeAir output 140CFM, 66 litres/secPressure at outlet taps 7 bar (100psi)Engine speed control Fully modulating engine speed control linked to air demandCompressor drive DirectCompressor cooling Air blast typeAir outlets 2¾ locksCompressor oil capacity 17 litres (3.3 gal)Ground clearance under compressor assembly 273mm (10.7 in)Weight of compressor plus balance weight 900kg (1983 lb)Tool stowage Two heavy duty breakersPower take off Independent, hydraulically operated

COMPRESSOR (Airmaster model only)

Machine model 2CX 2CX 2CXS 2CX Streetmaster Airmaster

Extending dipper ❍ l ❍ –

Exavator quickhitch ❍ l ❍ –

Loader quickhitch ❍ l ❍ ❍

Hammer pipework ❍ l ❍ –

Streetpads ❍ l ❍ –

Toolbox and tools l l l l

Battery isolator l l l l

Smooth ride system (SRS) ❍ ❍ ❍ ❍

Loader arm pipework ❍ ❍ ❍ ❍

Return to dig ❍ ❍ ❍ ❍

Object handling kit ❍ ❍ ❍ –

LiveLink ❍ ❍ ❍ ❍

Biodegradeable oil ❍ ❍ ❍ ❍

Air condiotioning ❍ ❍ ❍ ❍

Hydraulic tool circuit ❍ ❍ ❍ –

Hydraulic hose reel (9m) ❍ ❍ ❍ –

l= Standard, ❍= Option

SPECIFICATION

LOADER DIMENSIONS

M

T

V

P

S

R

Q

U

NO

LOADER DIMENSIONS

Narrow bucket GP shovel 6 in 1 shovel

m (ft-in) m (ft-in) m (ft-in)

Overall width with bucket 1.37 (4-6) 2.00 (6-7) 2.00 (6-7)

M Dump height 2.42 (7-11) 2.49 (8-2)* 2.48 (8-2)*

N Load over height 2.99 (9-10) 2.99 (9-10) 2.99 (9-10)

O Loader hinge pin height 3.24 (10-8) 3.24 (10-8) 3.24 (10-8)

P Pin forward reach 0.33 (1-1) 0.33 (1-1) 0.33 (1-1)

Q Reach at ground (toe plate horizontal) 1.43 (4-8) 1.43 (4-8) 1.44 (4-9)

R Max. reach at full height 1.13 (3-9) 1.13 (3-9) 1.14 (3-9)

S Reach at full height fully dumped 0.71 (2-4) 0.71 (2-4) 0.71 (2-4)

T Dig depth 0.10 (0-4) 0.10 (0-4) 0.10 (0-4)

U Roll back at ground degrees 45° 45° 45°

V Dump angle degrees 45° 45° 45°

Jaw opening width N/A N/A 0.70 (2-3)

Available on

2CX l l

2CXS l l

2CX Streemaster l

2CX Airmaster l l l

JCB loaders provide parallel lift self levelling on the up and down cycle enhancing load retention and use of optional pallet forks. High capacity buckets combined with high lift and breakout forces maximise productivity.

G.P. Shovel 6 in 1

Bucket breakout force kgf (lbf) 3600 (7921) 3600 (7921)

Loader arm breakout force kgf (lbf) 3850 (8471) 3850 (8471)

Lift capacity to full height (1850mm wide) kg (lb) 2200 (4844) 2100 (4624)

LOADER

BACKHOE LOADER | 2CX

W

X

Y

Z

BACKHOE LOADER | 2CX

LOADER ATTACHMENTS

LOADER DIMENSIONS – Forklift Performance Data

Quickhitch mounted forks

m (ft-in)

W Forks – tine length 1.20 (3-11)

Forks – tine width 0.1 (0-4)

X Forks reach at ground level 1.02 (3-4)

Y Forks reach at full height 0.71 (2-4)

Z Forks lift height – max. 3.04 (9-11)

Fork spacing – min 0.15 (0-6)

Fork spacing – max 1.28 (4-2)

SWL @ 500mm load centres kg (lb) 1600 (3526)

Max. rollback at ground degrees 10°

Loader buckets are listed according to size and application. All buckets are drilled to accept optional auxiliary cutting edge or teeth. Flat top box section provides rigidity and assists in bucket levelling.

2CXS

G.P. Shovel Capacity SAE 6 in 1 Shovel Capacity SAE

Width mm (ft-in) Rated m³ (yd³) Struck Rated m³ (yd³) Struck

2000 (6-7) 0.7 (0.92) 0.56 (0.73) 0.6 (0.78) 0.49 (0.64)

2CX, 2CX Streetmaster, 2CX Airmaster

G.P. Shovel Capacity SAE 6 in 1 Shovel Capacity SAE

Width mm (ft-in) Rated m³ (yd³) Struck Rated m³ (yd³) Struck

1850 (6-0) 0.6 (0.7) 0.46 (0.59) 0.6 (0.78) 0.49 (0.64)

LOADER ATTACHMENTS – Direct Mount

JCB backhoe buckets are designed specifically for use on JCB machines with pin positions to maximize tearout, load retention and straight wall digging characteristics.

Width Capacity SAE

mm (in) m3 (ft3) m3 (ft3)

230 (9) 0.028 (1.0) 0.022 (0.79)

300 (12) 0.03 (1.07) 0.03 (1.07)

350 (14) 0.04 (1.43) 0.03 (1.07)

400 (16) 0.05 (1.79) 0.04 (1.43)

450 (18) 0.06 (2.14) 0.05 (1.79)

600 (24) 0.09 (3.21) 0.07 (2.50)

750 (30) 0.11 (3.93) 0.09 (3.21)

BACKHOE ATTACHMENTS – Standard Profile Bucket

Width Capacity Rated

mm (in) m3 (ft3)

1200 (48) 0.16 (5.71)

BACKHOE ATTACHMENTS – Grading Bucket

Required oil flow 20 – 68 ltrs per minute

Strike rate 300 – 1675 blows per minute

Tool diameter 63mm

Joules per blow 350

Working weight 230kg (506lb)

BACKHOE ATTACHMENTS – Hammermaster 260L Rockbreaker

A

B

C

D

F

G

E

C H

J

2CXSUPER

2CXSU

PER

2CXSUPER

2CXSU

PER

A

B

C

D

F

G

E

C H

J

2CXSUPER

2CXSU

PER

2CXSUPER

2CXSU

PER

2CX 2CX, 2CX Streetmaster

Standard Dipper Extradig

m (ft-in) m (ft-in)

A SAE max dig depth Ext 3045 (10-0) 3701 (12-2)

Ret – 3053 (10-0)

SAE 2ft flat bottom

Ext 3020 (9-11) 3675 (12-1)

Ret – 3026 (9-11)

B Reach – ground level to rear wheel centre Ext 5114 (16-9) 5727 (18-9)

Ret – 5107 (16-9)

C Reach – ground level to slew centre Ext 3987 (13-1) 4600 (15-1)

Ret – 3980 (13-1)

D Reach – at full height to slew centre Ext 1406 (4-7) 1897 (6-3)

Ret – 1406 (4-7)

E Side reach – to centre line of machine Ext 4428 (14-6) 5045 (16-7)

Ret – 4432 (14-6)

F SAE operating height Ext 4073 (13-4) 4454 (14-7)

Ret – 4028 (13-3)

G Maximum loadover height Ext 2772 (9-1) 3235 (10-7)

Ret – 2809 (9-3)

H Total kingpost travel Ext 894 (2-11) 894 (2-11)

Ret – 894 (2-11)

J Bucket rotation 187° 187°

BACKHOE DIMENSIONS – 2CX & 2CX Streetmaster

2CX 2CX, 2CX Streetmaster

Standard Fixed Dipper Extradig

kgf (lbf) kgf (lbf)

Bucket tearout 4200 (9259) 4200 (9259)

Dipper tearout Ext – 1733 (3821)

Ret 2253 (4967) 2284 (5035)

kg (lb) kg (lb)

Lift capacity of bucket pivot at full reach Ext – 729 (1607)

Ret 980 (2161) 821 (1810)

BACKHOE DIMENSIONS – 2CX & 2CX Streetmaster

BACKHOE LOADER | 2CX

A

B

C

D

F

G

J

E

C H

2CXSTREETM

ASTER

2CX

STRE

ETMA

STER

2CXSTREETM

ASTER

2CXSTREETMASTER

A

B

C

D

F

G

J

E

C H

2CXSTREETM

ASTER

2CX

STRE

ETMA

STER

2CXSTREETM

ASTER

2CXSTREETMASTER

Standard Dipper Extradig

m (ft-in) m (ft-in)

A SAE max dig depth Ext 3.66 (12-0) 4.31 (14-2)

Ret – 3.66 (12-0)

SAE 2ft flat bottom

Ext 3.59 (11-8) 4.24 (13-11)

Ret – 3.59 (11-8)

B Reach – ground level to rear wheel centre Ext 5.74 (18-10) 6.35 (20-10)

Ret – 5.73 (18-10)

C Reach – ground level to slew centre Ext 4.61 (15-2) 5.22 (17-2)

Ret – 4.60 (15-1)

D Reach – at full height to slew centre Ext 2.67 (8-9) 3.16 (10-4)

Ret – 2.67 (8-9)

E Side reach – to centre line of machine Ext 5.15 (16-11) 5.73 (18-10)

Ret – 5.13 (16-10)

F SAE operating height Ext 4.59 (15-0) 4.97 (16-4)

Ret – 4.59 (15-0)

G Maximum loadover height Ext 3.32 (10-11) 3.74 (12-3)

Ret – 3.32 (10-11)

SAE loadover height

Ext 3.29 (10-10) 3.70 (12-2)

Ret – 3.28 (10-9)

H Total kingpost travel 1.02 (3-4) 1.02 (3-4)

J Bucket rotation 187° 187°

BACKHOE DIMENSIONS – 2CXS

Standard Dipper Extradig

kgf (lbf) kgf (lbf)

Bucket tearout 4200 (9259) 4200 (9259)

Dipper tearout Ext 2487 (5483) 1970 (4343)

Ret – 2487 (5483)

kg (lb) kg (lb)

Lift capacity of bucket pivot at full reach Ext 747 (1646) 453 (998)

Ret – 697 (1536)

BACKHOE PERFORMANCE – 2CXS

BACKHOE LOADER | 2CX

JCB | LIVELINK

As part of our dedication to looking at new, innovative ways to help you get the most out of your machine, our latest development is JCB LiveLink: an advanced machine monitoring system that enables you to better protect your investment and accurately monitor and improve machine performance.

JCB LiveLink is a software system that enables JCB owners to monitor and manage their machines remotely. All you need is a PC connected to the internet. The LiveLink computer is built into the machine where it collects information from a number of sensors. This information is sent, using mobile communications technology, to JCB’s secure data centre. Machine management information is then displayed to users via the LiveLink website, by email or via mobile phone.

By providing you with information on the usage and productivity of your fleet, JCB LiveLink enables you to keep track of each machine’s efficiency, ensuring that you get the best value for money possible.

By providing information on the location, movement and activity of machines, the system can also assist in ensuring machines are operated at the correct times and helps to protect them from theft. And, JCB LiveLink helps machine owners to confirm that their machines are well maintained and in good health without having to travel around work sites inspecting machines.

In response to increasing concerns regarding machine security, we now also offer JCB Guardian as an option on every new JCB machine. JCB Guardian is a package of theft protection and monitoring systems that includes LiveLink telemetry along with *CESAR identification, immobiliser technology and a host of optional locks and guards. It’s your peace of mind

solution that can also result in considerable insurance premium savings.

*Territory specific

Your machine – working efficiently, secure and in good health

JCB LiveLink and Guardian are the key to all three

JCB | ASSETCARE

Flexible aftercare solutions from JCB Assetcare

JCB Assetcare offers you the following options, which can be tailor-made to meet your specific requirements including excellence as standard:

For complete peace of mind and total budget predictability, your JCB dealer can offer a Full Repair and Maintenance package, with a fixed monthly sum covering all regular maintenance and necessary repairs including Flexicare for excavators and wheeled loading shovels, to give a pay by the hour alternative.

A JCB Service Agreement allows you to plan and manage your maintenance budget over a period of hours, or years of machine use, as determined by you. The price is maintained for the duration of the agreement and includes all parts, lubricants, labour and travel to maximise your machine performance.

JCB Sure Price Service (pay as you go) includes all genuine JCB lubricants, filters, greases and other parts and is carried out as you require it. The all-inclusive price also covers labour, 100 point check and any travel. Service intervals are hours based (usually every 500 hours) and no prior agreement is required; simply advise your dealer when the machine reaches the recommended service interval for great value for money.

JCB Machinery Protection Plan protects you against any unexpected failure for up to 2, 3, 4 or 5 years or up to 10,000 hours depending on machine type. You can take up a Machinery Protection Plan at any time during the first three months of ownership, and the package is transferable on the initial machine sale. Coverage options are 500, 1000, 1500 or 2000 hours per year (model dependent).

JCB Driveline Protection Plan – sign up to a Service Agreement on backhoe or Loadall mechanical transmission machines and get FREE Driveline Protection for every 1,000 hours you commit to (covers engine,

transmission and axle).

For the full terms and conditions of the above programmes please speak to your local dealer.

“For complete peace of mind and cost predictability

choose JCB Assetcare.”

JCB Assetcare is a range of flexible service options designed

to ensure you get the very highest standards of machine

servicing, no matter what your budget. It guarantees you the

optimum level of aftersales support, with highly skilled,

factory-trained engineers using genuine JCB parts and

lubricants to maintain maximum machine performance.

This allows your machine to be covered to maximise

uptime and profitability throughout its operating life.

JCB | A FEW WORDS

A few words about JCB

A groundbreaking, world class family business with a commitment

to supporting our customers and protecting the environment

A family company on a global scale. JCB is no ordinary company.

From the dreams of one man, Joseph Cyril Bamford, we have grown

into the world’s largest privately owned construction equipment

company. Since 1945, the same attention to detail, passion for progress

and family spirit has taken us from strength to strength.

Nowadays JCB operates across six continents, manufacturing at 20

factories in the UK, Brazil, Germany, China, North America and India.

With 2,000 dealer depots selling and supporting our products in over

150 countries, we are the global market leader for backhoe loaders and

telescopic handlers.

A history of world-class innovation. Our business has always

been driven by innovation, using only the most advanced technology,

meticulous design, precision engineering and rigorous testing. Evidence

of this commitment to innovation is illustrated in our revolutionary JCB

DIESELMAX engine. Having grabbed the headlines when it smashed the

world diesel land speed record at 350.092mph, it is now providing our

customers with tomorrow’s performance today.

Doing things more efficiently, more sustainably. Since 2007 we have

reduced our carbon emissions by 20%. We are continually working to further

reduce the carbon footprint of our operations and, in partnership with our

suppliers, our whole supply chain. We are also committed to designing our

products to be sustainable during manufacturing, over the life of the machine

and through end-of-life recycling. Our new ECO machines, for example, offer

significant fuel and carbon savings; an average of 16% on the ECOs, ECO skid

steers and ECO compact track loaders, and 22% on the 8085 ECO.

JCB | BACK-UP

Manufacturing Facilities Dealers

The best back-up in the business

Whether we’re providing you with support, parts or finance, we aim for 100% satisfaction. It’s all part of our

promise to put you, the customer, first

Wherever you are, we are. Our mission to provide world-class

support and deliver 100% satisfaction reaches into more than 2,000

dealer depots, spanning 150 countries across six continents. The aim?

To bring you global expertise at a local level. We truly believe no other

manufacturer does more to understand the subtle differences between

one region of the world and another. It’s a degree of attention that

we maintain at every level of the company and an assurance to our

customers that wherever they are in the world, JCB will fulfil their needs.

Trust the genuine article. At the heart of the support network is our

impressive World Parts Centre, a state-of-the-art facility operating 24/7

to dispatch more than a million genuine parts and attachments every

week to our dealers and international distribution centres. Because

we understand the need to minimise downtime, we utilise the latest

logistics and warehouse management systems and have committed to an

‘Anywhere in 24 hours’ strategy.

Keeping you up and running. Just as important as genuine JCB

parts are the people who fit and maintain them. Our JCB-trained

technicians in all of those 2,000-plus dealer depots provide excellent,

expert customer care, whether it’s routine servicing or something more

urgent. If there is an emergency breakdown situation, we need to act

fast. This is why all our dealers operate their own fleets of support

vehicles, enabling parts to be delivered quickly and fitted expertly, and

fulfilling our promise to keep our customers working.

Maximising earning potential. We grow as our customers grow.

That’s why, at JCB, we are committed to offering expert financial advice

and support to help customers maximise their earning potential.

Finance options* are available for new and used machinery, all part of

our dedication to helping customers preserve their working capital while

spreading costs in the most effective and tax-efficient way.

And as well as financial help, we are also happy to offer JCB Insurance.*

We specialise in construction and industrial insurance and in offering

Insurance Premium Finance facilities.

* Please check individual countries for available services.

Parts Distribution Centres

JCB Sales Limited, Rocester, Staffordshire, United Kingdom ST14 5JP. Tel: +44 (0)1889 590312 Email: salesinfo@jcb.com Download the very latest information on this product range at: www.jcb.com©2009 JCB Sales. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB Sales.

JCB reserves the right to change specifications without notice. Illustrations and specifications shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.

9999/5463 07/11 Issue 3

www.carbonbalancedpaper.comunique print number