Upload
ngolien
View
222
Download
4
Embed Size (px)
Citation preview
1
2.
3.
4.
5.
6.
7.
1.
2.
3.
Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the
proposed interior & electrical work of Khajutti Branch,Vill+P.O-Khajutti,Block-Bagnan-I, P.S-
Bagnan, Dist - Howrah, Pin-711303 West Bengal. The work is to be completed within 2(Two)
weeks.
(Government of India Undertaking)
NOTICE INVITING TENDER
Interested agencies having experience in work of similar nature & magnitude and fulfilling the
eligibility criteria given below may download detailed tender document from Bank's Website
http:bankofbaroda.com
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility
criteria & the technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial
bid along with a copy of the tender document, duly signed in all pages both shall be separately
sealed & submitted in another sealed envelope to the Deputy. General Manager, Bank of Baroda,
West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt Lake City,
Kolkata : 700 091, by 3 P.M. on 05.03.2013 along with Earnest money amounting to Rs. 7,000/- by
Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.
Part 'A' will be opened at 3.30 p.m.. on 05.03.2013.
Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the
tender document. The unopened part 'B' along with Earnest Money deposit for those not fulfilling
qualifying criteria will be returned.
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our
Consultant M/s. AXIS, C206, 2nd floor, City Center, SEC-I, Saltlake City, Kolkata - 700064, Phone no -
9831932317 , 9143120969.
The Bank reserves the right to summarily reject any or all application without assigning any reason
there for.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
The tenderer should have completed in last three Financial years (i.e. current year & two previous
financial year) in Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc.
minimum 3 (three) similar composite work (Interior Furnishing & Electrical) costing not less than Rs.
15.00 lacs in single contract. (Work order & completion Report in support must be submitted &
marked annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be
minimum as 25.00 lacs per year in contract work. In support of this the Tenderer should submit
audited balance sheet duly Certified by the Chartered Accountant & marked annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an
amount of 200% of the advertised Tender value marked annexure-III.
Bank of Baroda
1
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
d)
e)
List of technical persons available on hand, years of their association with the firm & proposed to be
engaged for the subject work, if selected (marked annexure-IX) ;
List of important plant & machinery available on hand (own) and proposed to be inducted (own &
hired to be given separately) for carpentry & electrical work (marked annexure-X)
- marked annexure - IV
- marked annexure - V
- marked annexure - VI
- marked annexure - VII
- marked annexure - VIII
The Tenderer should also submit the following documents along with the Tender.
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for
day to day supervision & coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not
be accepted.
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt. Govt.
undertaking / Corporate Sectors giving description of work, organisation for whom executed,
approximate value of contract at the time of award, date of award and date of scheduled
completion of work, date of actual completion and final value of contract should also be given
(marked annexure-XI)
List of works in hand indicating description of work, contract value, approximate value of balance
work yet to be done and date of award (marked annexure-XII)
2
1.
2.
3.
4.
5.
6.
7
8.
9.
10.
11.
All the tenderer are advised in their own interest to be present on the date of opening of the Bids, at
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to
be used in the work.
GENERAL TERMS & CONDITIONS
The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.
Contractors will be required to arrange for their own storing. Dismantled materials are to be carted
away from site at own cost and disposed of in conformity with Municipal regulations.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory
taxes, transport, handling delivery at site and installation, complete in all respect, as per drawing,
directions or instructions of Employer/Consultant. The quoted rates are also to include dismantling of
partitions, counters, old electrical wirings etc. and stacking serviceable materials and disposal of
debris, etc.
The arrangement for “ Wire Management " is to have prior approval of the Client.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any
causes whatsoever, shall be entertained.
The time of completion shall be two (2) weeks from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of
offer.
Payments will be made once on completion by the Employer within 15 days after certification of bill
by the Consultant 10% of the total payable amount is to be retained as retention money and will
become due for release after expiry of six months from the date of completion of the installation &
subject to satisfactory maintenance of the executed work.
Tenders addressed to Deputy General Manager, Bank of Baroda, West Bengal & Sikkim Region and
submitted at his office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata :
700 091, by 3 P.M. on 05.03.2013, accompanied by Earnest Money amounting to Rs. 7,000/- by Bank
draft payable to Bank of Baroda and other documents as mentioned in NIT. Part 'A' of the tenders
will be opened at 3.30 P.M. on the same date.
The Employer reserves the right to themselves to accept or reject any or all offers without assigning
any reason therefor.
the specified time. Any corrigendum will be issued only in our website.
3
SL.NO. ITEMS
1 False Ceiling / Channels
Wood Frame Work / Wood Section : All Wood
Must be well seasoned, free from knots, other
defects decay and defects due to handling and
Transportation. Wherever necessary, provide with
anti – termite Treatment.
3 Wood Skirting / Moulding / Lipping / Bidding
a) Door frame :
4 Wood Preservative :
5 Fire Reterdent Paint
6 BWR Ply / BWP Block board with ISI mark
7 Flush Door
Laminate ( 1.0mm thk.)
9 Door Closure ( Heavy Duty )
10 Floor Spring ( Heavy Duty )
11 Door Lock ( Dead )
12 Door Handles ( ‘H’ Shape)
13 Drawer / Storage Handle ( 4”/ 6” )
14 Drawer / Storage Lock ( Multipurpose )
15 Night latch
16 Screws
17 Hinges
18 Sliding Telescopic Drawer Channel
19 Key Board Tray ( Metal)
20 Telescopic CPU Stand ( Metal )
21 Cable Organiser
22 Adhesive
23 Aluminium Door Frame
24 Soft Board
25 Vertical Blinds
26 Glass
27 Paints (Synthetic Enamel / Acrylic Emulsion)
28 PVC Flooring
29 Texture Paint
30 Mirror
31 European WC / Washbasin
32 Sanitary Fittings
33 G.I. Pipe
34 Cement
35 Footmat
36 Vitrified Tiles
37 Ceramic Tiles
38 Chairs
39 All other items not covered above
LIST OF APPROVED MATERIALS FOR CIVIL & FURNISHING WORK
2
8
APPROVED MAKE
India Gypsum
Malaysian Sal
White Beach / White Ceader
Teak wood
STP Pentaphene Pale / Termiseal by PCI / Bison by
British Paint
Sunmica / Euromica / Green lam /Merino / Century mica /
Royal Touch
Industrial grades of Noble / Viper
Kich /Neki / Hassley/EGL ( HMS –B – 9122 / 9123)
Ebco / Hafele /Hettich /Doorset /Godrej/Kombo ( 502)
Green /Century/Sylvan
Green /Century/Sylvan
Godrej / Archi / Sterling ( DC 2000)
Godrej / Archi / Sterling ( FS 3000 )
Godrej / Hafele /Hettich / Kich / Doorset / 4C Acme ( ML
– REG – SS )Godrej / Hafele /Hettich / Kich / Doorset / 4C Acme (
PHG – HSS )
Mac / Annums / Window Fashion
Jolly Board
Modi /Ashai / Saint Gobain
Godrej / 4C Acme ( RL – MACHO – OS – SS )
GKW / Nettle fold
CIEF
Ebco / Kombo
Ebco / Innofitt Systems ( KD 510. M)
Ebco / Innofitt Systems ( CPU MST )
Ebco / Innofitt Systems ( CM 63.C )
Fevicol SH / Fevimate TL
Jindal
Naveen /Jhonson/Euro
Johnson / Naveen/Kajaria
Godrej/Methodex/Monarch
Asain Paints ( Colour World) / Berger( Colour Bank )
Krishna Vinyl / Armstrong / LG
Spectrum/Asian paints/Nerolac
Modi /Ashai / Saint Gobain
Hindware /Parryware
Jaquar / Essco Delux
As per sample approved by Employer/Consultant
Tata ( Medium ) / Jindal /Bansal
Ambuja/ Laferge / ACC
Birla 3M / Approved Equivalent
4
SL.NO.
1 ITEMS
2 MS pipe ISI mark. 16 SWG
3 M.S. fittings (Bend / Elbow / G.I Saddle / 3way
circular box)
4 Wire PVC insulated copper flexible wire. (FRLS)
5 A.C. starter
6 250 Volt 6 Amp type switch, socket, modular plates
7 250 Volt 6/16 Amp. 3 pin modular type switch,
socket
8 Relay
9 Capacitor
10 Current Transformer
11 Changeover Swiitch
12 Amps meter & Voltmeter. 96 x 96 mm (Analog)
13 Miniature Circuit Breaker & MCB Distribution
Boards, RCBO
14 Amoured Cable
15 Telephone Socket RJ - 11
17 Telephone Cable ( 0.51 mmsq) 10/20 pair
18 Lugs
19 Terminal Connector
20 SFU / SPN / TPN Sheet metal housing / Open
execution front handle with housing
21 Telephone Connector
22 Selector Switch ( Rotary type)
23 Rigid PVC Conduit
24 Sliding fuse / DZ fuse
25 PVC casing ( 20 mm )
26 Clock switch / Time switch
27 PVC Tape
28 Join box ( 6” x 4” MS box ) heavy type
29 Call Bell
30 Brass cable gland
31 LED Indicator ( bright type)
32 PVC Flexible pipe
33 Metal Clad socket & plug having scraping earth
arrangement
34 MCCB
35 Light fittings
36 All other items not covered above
Wipro / Philips / Havell’s
As per sample approved by Employer/Consultant
Mikadov / L&T / MDS
Hanuman / Precession / Kalinga
Siemens / L& T/ MDS / Schneider
Siemens / L& T/ Northwest Wipro / Havell’s
Steel Grip / Anchor
Local Make
Anchor / Max / Nortwest
ESSEN
L & T / Siemens / Havell’s
KORN type
Kaycee / A.E./ L& T/ Siemens
Arun ( heavy type ) / Dowells
BEC / Kalinga / Plaza / AKG / Precession
Bharat Lender / BCH
Precession / Supreme / Oriplast
L & T/ MDS / GIC / T & C
Dowells
Kappa / L&T / Schneider (CG) A.E.
L&T HPL / GEC / Havells
AE / IMP / L&T ALSTOM/ HPL / Havlells
Siemens / Northwest wipro / Havell’s
North – West / Crabtree/ MDS Legarand
NICCO / Northwest Wipro/ Havell’s CCl
Crabtree / ABB / MDS
National / Delton / Netco / Finolex / Retco
Kolors/ Anchor/Northwest Wipro
Legrand / Siemens/ Nortwest Wipro
ALSTOM / L & T
Mamal / L&T
APPROVED MAKE
BEC / NIC
BEC / NIC
Finolex / Havel’s / R.R. Kable
LIST OF APPROVED MAKE OF MATERIALS FOR ELECTRICAL WORKS
5
Sl.No. Item of Works Unit Quantity Rate Amount
1 PARTITIONS:-
NOTE:
A. The rate for wooden partition or cladding will
include for making out outlets of appropriate size for
electrical, telephone and computer terminals wherever
required. The surface of the electrical boxes if any shall
be hidden/ flushed with laminate work according to
design.B. All wooden framework for partition or any allied
work shall be free from large knots, cracks, saps and
other defects and to be treated with two coats of
solignum paint. Timbers shall be of specified quality
and approval of competent authority shall be obtained
before fixing the framework.
C. All plywood shall be of BWR grade and blockboard
shall be BWR.
D. All door frames and members of the partition walls
to be fixed securedly with RCC, ceiling and floor.
E. All framework shall be of sesoned kapur wood
unless otherwise mentioned.
a Solid Partition :-
Supplying and erecting full height partly glazed
partition as per drawing and conforming to the
following specification Basic Framework:- Full height Solid partition with
kapur wood frame of C.S size 2" x 2" at required
spacing but not exceeding than 2'-0" x 2'-0". The
framework shall be treated with two coats of wood
preservative and fire retardant material
Skin Membrane:- The skin shall comprise of a
covering of 6mm thick BWR grade plywood
Finishing:- 1mm thick laminate of prescribed shade on
both sides. The groove between two laminate joint shall
not exceed 1.0 mm as or otherwise specified by the
architect.
Skirting:- The skirting shall be 4" high thick finished
with prescribed shade of laminate as per design.
SIZE
1.a.1 UP TO CEILING HT. SFT 240.00
1.a.2 UP TO 5'-6" HT. SFT 75.00
1.a.3 UP TO 4'-0" SFT 55.00
b Partially Glazed Partition :-
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
Supplying and erecting full height partly glazed
partition as per drawing and conforming to the
following specification. Basic Framework :- kapur wood frame of C.S size 2" x
2" at required spacing but not exceeding than 2'-0" x 2'-
0". All the framework shall be coated with two coats of
wood preservative and Fire Retardant material.
Skin Membrane :- The opaque portion of the partition
(3'-0" from the finished floor level) as per design shall
be covered with BWR grade 6 mm thick ply on both
sides of the partition.
Finishing :-The opaque portion shall be covered with
1mm thick laminate of the prescribed shade .The groove
between two laminates shall be not more than 1mm.
Skirting:- The skirting shall be 4" high thick covered
with BWR grade 6 mm thick ply and finished with the
prescribed shade of laminate.
Glazing:- The transparent parts of the partition shall
comprise of 12 mm thick clear glass (etched as per
design) tightened in place with teakwood glazing bead
of approved shape and polishing the same with wood
polish of mahogany colour as per the instruction of the
architect. In case of Cash counters the glass shall have
hole for transaction of money and papers.
Edge Moulds:- All free top/ end surfaces shall have
teakwood moulds of approved shape (80 x 25 mm C.S)
finished with wood polish of mahogany colour. Rate shall include providing cutouts and provisions to run electrical conduits, switches etc. It shall a
SIZE
b.1 UP TO 5'-6" HT. SFT 45.00
b.2 UP TO 4'-0" HT. SFT 0.00
2 PANELLING FOR WALLS AND FREE
STANDING PILLARS:-
2.a Column Encasing (upto false ceiling level) works as
per drawing and conforming to the following
specification:
SFT 30.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
Basic Framework:- Well kapur wood Sections treated
with two coats of wood preservative and Fire retardant
material of cross section size 2" x 1" at horizontal and
vertical spacing of not more than 2'-0" x 2'-0" c/c.
Skin Membrane:- Providing and fixing 6 mm thick
plywood of BWR grade as per drawing/ instruction.
Finishing:- 1 mm thick laminate of same or
combination shades as per drawing or instruction and
groove not more than 1 mm.
Skirting :- Providing and fixing of Malaysian Sal of
size 4" x 1" C.S and membraning the same with 4 mm
thick plywood of BWR grade and finishing it with 1
mm thick laminate of same or combination shade as per
instruction/ drawing.
Rate shall also include providing cutouts and provisions
to run electrical conduits, switches etc. The thickness of the partition may vary as per design and the rates shall include the changes in the thickness as well
2.b ACP PANEL
Encasement area for entrance doors and columns
with Aluminium Composite panel. Company :
Alstone. Till 2'-6" Height Colour Code VL-07/VL-04.
Colour Above 2'-6" Height till the false ceiling level
Colour Code VL-03 (For the Columns). For the Door
Encasement Colour Code VL-03. All the Aluminium
Composite panelling needs to be done with required
Aluminium Framework.
SFT 95.00
3 DOORS:-
a Solid Flush Door:- Supplying and fixing in position
overall 37 mm thick solid core hot pressed phenol
formaldehyde bonded approved flush door shutter
finished with 1 mm thick laminate sheet of approved
shade and colours with a groove of not more than I mm
in case of two different laminates colours. The rates
shall include the cost of door frame, hardware, bolt,
locks, hinges, handles etc.
3.a.1 Blocked door in entry toToilet&cash area, Pantry &
Store Room with vision panel (3'-0"x7'-0")
NO 3.00
`
3.a.2 Entry to cash and cash area door ( 3'-0" & 2'-3" x 5'-
6")
NO 2.00
3.a.3 Entry door to store room without etching ( 3'-0" x 4'-0") NO 0.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
3.b Glazed Main Door:- Providing and fixing in position
of single leaf door shutter made out of 12 mm thick
float glass etched as per design. The other side of the
door shall have fixed glass as per design. The door shall
rotate on floor springs of ISI make on which the
shutters shall be pivoted at top and bottom. Door
handles shall of H-type of satin finish stainless steel
handlesThe rates shall include cost of door frame,
hardware, bolt, locks, hinges, handles etc. Door size: 4'-
0" x 7'-0". The rates shall include etching the Bank's
logo and emblem on the glass in the size and design as
prescribed by the architect.
sft 50.00
4 FURNITURES:-
4.a Providing and fixing of officer/ CSR desk made out of
19 mm thick BWR grade ply. The top shall be 25 mm
thick finished with prescribed shade of laminate. All
drawers and shelves shall be of 12 mm thick ply. All
exposed surface shall be of the prescribed shade of
laminates 1 mm thick and the internal portions of
drawers and cabinets shall be done with 0.8 mm thick
white laminates. Each table shall have one drawer of 4"
height and 1'-6 " wide and a tea tray above that as well
as a shelved and shutter cabinet below that . The table
shall as per design. The table size is of 5'-0" x 2'-6".
The height shall be 2'-6" standard. Placement of
drawers and shelves shall be as per design. All the ply
edges shall be lipped and finished with prescribed shade
of polish . The rate shall also include the cost for
hardwares like hinges, towerbolts, handles, magnets,
wire manager etc.
Nos. 1.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
4.b Providing and fixing of Branch Manager's table made
out of 19 mm thick BWR grade ply. The top shall be 25
mm thick with prescribed shade of laminate All drawers
and shelves shall be of 12 mm thick ply. All exposed
surface shall be of the prescribed shade of laminates 1
mm thick and the internal portions of drawers and
cabinets shall be done with 0.8 mm thick white
laminates. Each table shall have one drawer of 4" height
and 1'-6" wide with a tea tray above and a shelved and
shutter cabinet below that . The table shall have CPU
tray (INNOFITT system or equivalent) and keyboard
tray (INNOFITT System or similar). The table size is of
5'-6" x3'-0". The height shall be 2'-6" standard.
Placement of drawers and shelves shall be as per
design. The side unit shall be 3'-0" in length and 1'-6"
wide with the standard height of 2'-6". The side unit
shall have shelves beneath with sliding shutters.All the
ply edges shall be lipped and finished with prescribed
shade of polish . The rate shall also include the cost for
hardwares like hinges, towerbolts, handles, magnets,
wire manager etc.
Nos. 1.00
4.c Providing and fixing of clerical desk made out of 19
mm thick BWR grade ply. The top shall be 25 mm thick
finished with prescribed shade of laminate. All drawers
and shelves shall be of 12 mm thick ply. All exposed
surface shall be of the prescribed shade of laminates 1
mm thick and the internal portions of drawers and
cabinets shall be done with 0.8 mm thick white
laminates. Each table shall have one drawer of 4" height
and 1'-6 " wide and a tea tray above that as well as a
shelved and shutter cabinet below that . The table shall
have space for CPU tray (INNOFITT systems or
similar) and keyboard tray (INNOFITT systems or
similar) as per design. The table size is of 4'-0" x 2'-0"".
The height shall be 2'-6" standard. Placement of
drawers and shelves shall be as per design. All the ply
edges shall be lipped and finished with prescribed shade
of polish . The rate shall also include the cost for
hardwares like hinges, towerbolts, handles, magnets,
wire manager etc.
Nos. 1.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
4.d Providing and fixing of Cash Counters made out of 19
mm thick BWR grade ply. Working counter side : The
Height of this side shall be 2'-6" All drawers and
shelves shall be of 12 mm thick ply. All exposed
surface shall be of the prescribed shade of laminates 1
mm thick and the internal portions of drawers and
cabinets shall be done with 0.8 mm thick white
laminates. Each table shall have set of 3 drawers1'-6"
width on slide channels on one side . The table shall
have CPU tray on the other side and akeyboard tray
(INNOFITT system / similar). The table size is of 4'-0"
x2'-0". The portion projecting on the customer side
shall be 10 " deep and have intermediate shelf 12 mm
thick shall have 2 sets of sliding shutter and a locking
arrangement for keeping currency note. customer
transaction side: The top shall be at a finished of (ht. 3'-
8") , 1'-6" wide and projecting 6" on the customer side.
This top shall be finished with 18 mm thick
Granite(Red) moulded as per instruction above a 19
mm ply and the total height includes this granite top.
The space between the working counter side and customer transaction side is utilized from the working side for keeping currency notes. The panel thus framed shall be finished with 1 mm thick laminate from outside and completed as per the instruction of the
NO 1.00
All the ply edges shall be lipped and finished with
prescribed shade of polish and the glass edge shall be
polished and bevelled. The rate shall also include the
cost for hardwares like hinges, towerbolts, handles,
magnets, wire manager etc. Note that the portion above
the 3'-8" partition shall have glass with a hole for
money and paper transaction.
RFt. 0.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
4.e Providing and fixing writing ledge consisting of 25 m
thick BWP grade ply at base finished on all faces with 1
mm thick laminate, 5 mm thick glass partitions at
approx 150 mm c/c fixed on base with D brackets for
keeping withdrawal/ deposit forms and 8 mm thickened
toughened glass on top with help of studs all complete
as per drawings (approx width 300 mm). A cheque drop
box of size 2' x 2' x 6" with 1" wide slit for inseting
cheques made of 19 mm thick BWP grade ply finished
with 1 mm thick laminate of prescribed shade. The
inside of the box shall be painted with prescribed shade.
Nos. 1.00
4.f STORAGE
Providing and fixing of low height storages (height till
2'-6") made out of 19 mm thick BWR grade ply finished
with 1 mm thick laminate outside and 0.8 mm thick
laminate from inside. All the intermediate shelves shall
be 12 mm thick BWR grade plywood. The shutter shall
be of BWR grade blockboards of sliding types fixed
with sliding channels. The vertical divisions of the
storages shall be as per instruction/ drawings. Free
edges shall be lipped and polished with prescribed
colour shade of polish. The rates shall include sliding
handles, sliding channels and locks etc.
SFT 40.00
4.g General chairs with handle for front office, back office,
cash area and clients of Methodex or equivalent make .
The upholstery shall be of black rexin.
Nos. 3.00
4.h Executive High back upholstered chairs for Branch
Manager (Methodex Make or equivalent)
Nos. 1.00
4.i General still chairs with out handle for customer Nos. 6.00
4.j Multi seater for customer waiting area of approved
make (3 seater)
Nos. 2.00
5 FALSE CEILING :-
ARMSTRONG
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
5.a Providing , fabricating and erecting lay in type tegular
or drop type ARMSTRONG false ceiling of 600 mm x
600 mm grid with approved brand of armstrong. The
rate shall include the additional cost of Tee and L
supports and other accessories near the ends/ odd size
edges/corners. Provide additional length support from
the ceiling to the false ceiling grid wherever necessary,
making necessary openings for electrical light fittings,
alarm detectors and any other fixtures. No extra
payment for making openings in the panel/grids for the
purpose of light fittings. Item rate shall include all the
taxes, transportation, erection, loading and unloading
and any other incidental expenditure for completing the
work.
SFT 0.00
5.b Providing and fixing in position dropped ceiling in two
levels including vertical surfaces in between two level
of ceiling surface with 12.5mm thick tapered edge
gypsum board conforming to IS 2095 including
providing and fixing of framework made of special
sections power pressed from MS sheet and galvanised
in accordance with Zinc coating 600 as per IS 277 and
costing of angle cleats of size 25mm wide x 16mm
yhick with flanges of 22mm and 37mm at 1200mm
center to center one flange fixed to the ceiling with dash
fastner 12.5mm dia x 40mm long with 6mm dia bolts to
the angle hangers of 25x25x5mm of required length and
other end of angle hanger being fixed with nut and bolts
SFT 0.00
6 MISCELLANEOUS:-
6.a Providing and laying Kota stone platform of 19 mm
thick and 2'-0" wide and at 2'-8" high above finished
floor level with machine polished edge in the pantry.
The rate shall include the profile cutting and fixing of
below counter sink and polishing the exposed edges of
the stone. A 2" kota stone shall be provided below the
moulded edge.
RFt. 18.00
6.b Providing of stainless steel sink, faucet and trap fixing
in the pantry and wooden overhead cabinet made out of
19 mm thick BWR grade ply and finished with 1mm
thick laminate of prescribed shade and all open edges
finished with lipping and polished with prescribed
polish colour
Ls. 1.00
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
6.c Providing and fixing of vertical blinds (PVC coated
polyester Fabric) of approved shade and colour as per
the instruction of the architect tailored to the size of the
window
SFT 80.00
6.d Providing and fixing in position frameless double
acrylic sheet 2'-6" x 1'-6" mounted with mirror screws
on the walls along with all accessories complete for
display of bank's schemes, posters and notices.
No. 2.00
6.e Providing and fixing of pin up notice board made of
soft cork board finished with fabric as approved
matching with the colour scheme with a wood moulding
of prescribed shape all around the edges.
Sq.Ft. 20.00
7 12 mm GLASS PARTITION:-
Providing and fixing in position 12mm thk machine
polished glass at top of Cash counter front.Necessary 1
1/2" x1/2" white beech/white ceader moulding with
natural polish to be provided. The work to be completed
in all respect as per design , direction and approval of
Architect.
SFT 15.00
8 SYNTHETIC DOOR MAT :-
Providing and fixing synthetic door mats of approved
shade from Birla 3M( 6mm thk).The work to be
completed as per approval of the Architect.
NOS 0.00
9 SUGGESTION BOX:-
Providing and fixing suggestion box made out of 19mm
block board and finished with 1.0mm thk laminate &
inside to be synthetic enamel painted.A 1" high slit &
small door with key and locking arrangement to be done
for dropping & taking out the slips.The work to be
completed as per design,direction & approval of the
architect.
NO 1.00
10 CHEQUE DEPOSIT BOX:-
Sl.No. Item of Works Unit Quantity Rate Amount
BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF
BARODA
Providing and fixing cheque deposit box made out of
19mm thk block board & finished with 1.0mm thk.
Laminate & inside to be synthetic enamel painted.a 1"
high slit & small door with key and locking
arrangement to be done for dropping & taking out the
slips.The work to be completed as per the
design,direction & approval of the architect.
NO 1.00
11 FIRST AID BOX:-
Providing & fixing in position first aid box made out of
19mm thk. BWR block board finished with 1.0mm thk.
Laminate.Inside to be enamel painted.all exposed edges
to be covered with white beach/white cedar lipping with
natural polish.Necessary hardware like multipurpose
lock, brass hinges and handle to be provided.The work
to be completed as per the direction & approval of the
architect.
NO
12 MAIN PANEL ENCASEMENT :-
Providing & Fixing main panel encasement in position
fabricated out of 19mm BWR BB with 1.0mm thk.
Laminate for top,both sides&front.Encasement will be
having powder coated alluminium louver & 6mm thk.
Glass for seeing the indicator in both pallahs.The
exposed surface of 19mm BWP BB will be finished
with white beach/white ceader lipping & inside to be
enamel painted . The item to be completed in all respect
as per design , direction and approval of the Architects.
SFT 40.00
13 ANTI - STATIC PVC FLOORING:-
Providing and laying 2mm thk. anti - static PVC
flooring in UPS/Server and strong room of approved
colour on the existing floor with adhessive. The floor
should be clean,smooth,level,dry and free from oil, The
item to be completed in all respects as per design,
direction and approval of the Architect.
SFT 0.00
TOTAL - A
SL. PARTICULAR Unit Qty Rate Amount
1 PANEL & DISTRIBUTION BOARDS.
1.1
Supplying, Fabricating, assembling, inter-connecting,
testing and connecting with incoming and outgoing power
cables and lines as required to comlete the job of CUBICAL
TYPE ELECTRICAL PANEL made from 14 SWG CRC
M.S sheet with proper earthing terminal(Nut-bolt and
washer)-02 nos. outside panel, same nut-bolt to tighten with
internal earth bus-bar of panelsituated inside loose wire box
(on top portion of the panel). On top side of the panel, cable
entry arrangement is to be done for incoming and outgoing
of lines. One 6" x 4" enamel type 440 Volts danger board to
be fixed on the main panel busbar cover. All switches are
front handle operated and all MCB knob should be visible.
All componenets are to be provided in separate
compartment and only DBs in one compartment. The main
componenets are
Nos 1
1.1.1 100 AMPs MCCB, 35 Kva as main - 1 set
1.1.2 100 AMPs 4 Pole Cu. Busbar - 1 set
1.1.3 63 AMPs 4pole change over switch - 1 no
1.1.4 63 AMPs 4 Pole MCCB as DG & main incomer- 2 nos
1.1.5 40 A D.P MCB (For 5 Kva Ups) - 2 nos
1.1.6 25 Amps SP MCB : 6 Nos. , 16 Amps. SP MCB 6 Nos.
1.1.7 10 Amp SP MCB : 6 Nos.
1.1.8 16 AMPs DP MCB as glow sign board main - 1 no
1.1.9
Ammeter 0-100 A with 3 Nos. CT & selector switch 96 x
96 mm-01 set (A.E make) (CT ratio 100/5) A.E. make - 1
set
1.1.10Voltmeter-0-500 Volt A.C. 50 Hertz 96 x96 mm with
selector switch (A.E make)-01 set
1.1.11 22 mm dia LED indicator Lamp - 6nos
1.1.12 02 AMPs sliding fuse - 6 set
1.1.13150 x 100 mm enamel danger board 440 Volt(to set on bus
bar cover) - 1 no
1.2
Supply and fixing of 100 AMPs TPN HRC type SFU at
WSEB for main incoming on MS angle frame and 02 nos.
cable end box including connection complete with wire, lug,
pvc tape
Nos 1
1.3
Supplying, installation and Termination of UPS out-going
power distribution system with 12 way SPN DB comprising
of 10A SP MCB : 10 nos. and 32 AMPs DP RCBO 300
MA as main (MDS make) IP-42 protection with double
door. Power is to be taken from existing DB.
Nos 2
1.4Supply, installation and termination of 40 Amp DP MCB
DB 8 way in ATM Nos 1
2 CABLES AND CABLE END TERMINATION
2.1Supply & Fixing 3.5 C X 35 Sqmm Al. Ar. Cable From
Meter room to Panel including cable End TerminationMtr 10
2.2Supply & Fixing 3.5 C X 35 Sqmm Al. Ar. Cable From DG
to Panel including cable end termination.Mtr 50
2.3Supply & Fixing 3.5 C X 25 Sqmm Al. Ar. Cable From
panel to power DB including cable end termination. Mtr 10
2.4Supply & Fixing 4.0 C X 10Sqmm Al. Ar. Cable From
Panal to Lighting DB including cable end termination.Mtr 60
BUDGETARY ESTIMATE OF ELECTRICAL WORKS FOR KHAJUTTY BRANCH, BANK OF
BARODA
SL. PARTICULAR Unit Qty Rate Amount
BUDGETARY ESTIMATE OF ELECTRICAL WORKS FOR KHAJUTTY BRANCH, BANK OF
BARODA
2.5
Supply & Fixing 3.0 C X 6 Sqmm Cu. PVC Insulated wire
in PVC Conduit (from panel to UPS) including cable end
termination.
Mtr 25
2.6
Supply & Fixing3.0 C X 6 Sqmm Cu. PVC Insulated wire
in PVC Conduit (from UPS to UPS DB) including cable
end termination.
Mtr 60
3
3.1
Wiring for Light Point with 20 mm PVC pipe with
2x1.5 Sqmm wire and 1x1.5 Sqmm green earth wire for
light Points as reqd. complete with modular switch with
front plate
3.1.1 One light controlled by 6A switch Nos 12
3.1.2 Two light controlled by 6A switch Nos 6
3.1.3Exhaust fan point with 6 A sw complete with modular
switch plate & M.S conceal box & 3 pin ceiling roseNos 4
3.1.4
Fan point complete with modular switch plate & M.S
conceal box & 3 pin ceiling rose with electric regulator,
modular type.
Nos 5
3.1.5Call bell point with push type switch, modular plate & M.S.
conceal box with buzzer or ding dong type bellNos 2
4
4.1
Supply, laying of circuit line 2x2.5 sq.mm +1 x 1.5 Sq.mm
PVC insulated copper wire from MCB type lighting DB to
6 amp plug points (3 nos. 6 Amps plugs to be connected
from one circuit line)
Mts 130
4.2Modular type 6 A switch with 6A 5 pin socket . Mounted
on suitable front plateNos 8
4.3
Wiring for Power Point 6/16 A Switch & Socket with
25mm PVC pipe with 2x2.5 Sqmm wire and 1x1.5 Sqmm
green earth wire for Power Points as reqd. This line has to
be drawn from the power DB. (02 nos. plugs to be
connected with one circuit)
Mtr 90
4.4Modular type 6/16 A switch. with 16A 5 pin socket .
Mounted on suitable front plate Nos 4
5
5.1
Wiring for Power Point 6/16 A Switch & Socket with
25mm PVC pipe with 2x2.5 Sqmm wire and 1x1.5 Sqmm
green earth wire through PVC casing 20 mm dia 16 SWG
with ISI mark to lay from UPS MCB DB to plug point
board
Mtr 120
5.2
Supply and fixing of 2 x 6 Amps 5 pin socket + 1 x 16
amps 6 pin socket in single board (under table) + 1 x 16 A
switch (Modular switch + socket) in another board above
table as per direction
Set 6
5.3
Do- but 3 x 6/16 , 6 pin socket with three control switch to
provide near HUB Rack and line printer to be connected
from UPS power.
Set 3
5.4
Supplying, installation of UPS incoming 32 Amps industrial
socket with 32 Amps SPMCB (2 nos. for out going and 2
nos. for incoming) for 2 Nos UPS
Set 2
6 DATA/ TELEPHONE-LOW VOLTAGE SYSTEM
WIRING
RAW POINT WIRING-The wiring shall pass through PVC
UPS WIRING
SL. PARTICULAR Unit Qty Rate Amount
BUDGETARY ESTIMATE OF ELECTRICAL WORKS FOR KHAJUTTY BRANCH, BANK OF
BARODA
6.1
Supplying, laying and connection of telephone points with 2
pair .51 sq.mm tinned Cu conductor through PVC casing
ISI mark from telephone point to Krone DB complete with
RJ 11 telephone socket modular type in PVC concealed
box.
Nos. 3
6.2Do- 10 pair 0.51 sq.mm copper conductor telephone cable
in 20 mm dia PVC pipeMtr. 50
6.3
Supply, fixing and connection of 10 pair KRONE connector
DB complete with PVC moulded Telephone DB box with
locking system
set 1
7
7.1Supply and Fixing 580x580 Size 4x 14 Watts TLD Mirror
Optic Light Fittings.( Havells make ) LHCTP8424340Nos. 0
7.2Supply and Fixing of 1x36/40 Watts 4' length Slim Tube
Light for Coffer Lights (Havells Make) LHIF71104011Nos. 21
7.3
Supply and Fixing of Modular Downlighter of 170mm size
with 2x18 watts PL-C/ Model-LHOC33218399 including
electronic ballast
Nos. 0
7.4
9" heavy duty exhaust fan with louvre in toilet / pantry
inclusive of hole cutting in the wall and finished with
plastering complete
Nos. 4
7.5Wall Hung fan complete with all fitting and mending good
all damagesNos. 0
7.6Ceiling Hung fan complete with all fitting and mending
good all damagesNos. 5
8 Providing Change over switch for generator running Job 1
9
9.1Suppy & fixing of starter with 3 pin plug in recessed MS
box suitable for 1.5TR AC.Nos. 0
9.2Supply and Fixing in 25mm PVC Pipe with 3x 6 Sqmm
Cu. Cable For Single phase A/C Point Complete & reqd.Mtr 0
9.3
Supplying & Installing hi wall AC split unit (1.5 TR) with
rotary compessor of voltas make inclusive of all allied
works like outdoor stand,draing piping,wall chesing, cutting
copper & electrical wiring etc complete in all respect
Nos. 0
10
10.1
Supplying, laying of main line with 2 x 2.5 sq. mm + 1 x
1.5 sq. mm through pvc conduit from main panel to glow
sign board
Mtr 25
10.2Supplying , fixing of 16 Amps DP MCB at main entrance
with Glow sign board timer (24 hours in original housing)set 1
11
11.1Supply & Fixing 25 mm PVC Pipe with 8 SWG 2no,
Copper wire for Earthing.Mtr. 25
11.2Supply & Fixing 25x 3 mm GI Earth Strip 2no,Earthpit to
Panal Mtr. 25
11.3
Supply & Fixing 20mm PVC Pipe with 4C x 1.5 Sqmm Cu.
Flexible. Cable for PIR Control ( From Control panal to
Each PIR Control Only Cabling)
LS 1
AIR CONDITIONER
GLOW SIGN BOARD
EARTHING
FIXTURES INCLUDING LAMPS.
SL. PARTICULAR Unit Qty Rate Amount
BUDGETARY ESTIMATE OF ELECTRICAL WORKS FOR KHAJUTTY BRANCH, BANK OF
BARODA
11.4
Providing and making earthing station complete with
300x300x3 MM Cu Plate Complete with salt coal and
watering pipe Complete with chamber as reqd.
Nos. 2
TOTAL
SL
NO.PARTICULARS AMOUNT
A FURNISHEING WORKS
B ELECTRICAL WORKS
C
GRAND TOTAL
BUDGETARY ESTIMATE FOR PROPOSED BANK OF BARODA - KHAJUTTI BRANCH
SUMMARY SHEET (ABSTARCT)