Upload
others
View
21
Download
0
Embed Size (px)
Citation preview
Basic Mechatronics WorkshopModule 3: Introduction to PLC
Lecture-5PLC Introduction
History and elements
1
Dr. Mohamed AbdalbarLecturer, Mechatronics Department,
Egyptian-Korean Faculty of Technological Industry and Energy,
Beni Suef Technological UniversityEmail: [email protected]
Objectives
Upon completion of this chapter, Student should be able to
✓ Define PLC and its function
✓ Explain the difference between hard wired control and PLC control
✓ Explain the different section of PLC
✓ List the advantages of PLC over electromagnetic relays.
✓ Explain the PLC hardware architecture.
✓ Learn hardwired and PLC system characteristics.
Lecture-5PLC Introduction
History and elements
SIMATIC Controller (PLC)
S7-200
S7-300
S7-400
PLC systems consists of three division
1. Input section – Consists of pushbuttons, switches and sensors which
are connected to specific input addresses in the program. They
transfer address information to the processing section
2. Processing section –The microprocessor receives the input signals
from input sections and executes the information (called instructions)
in the software program and sends the processed signals to output
section
3. Output section –Takes the signal from processing section and modify
the signal from the processor to operate output devices connected to
specific output addresses.