Upload
dewanto-wicaksono
View
216
Download
0
Embed Size (px)
Citation preview
7/24/2019 B_C10038.23757
1/48
l i n e a .
S e l f - b e a r i n g c o v e r p l a t e s , a l l t h e b a s i c
f u n c t i o n s a n d V i m a r q u a l i t y i n a f l e x i b l e ,
r e l i a b l e a n d e c o n o m i c a l s e r i e s .
T o s p r e a d p o s i t i v e e n e r g y i n s i d e t h e h o u s e .
C A T A L O G U E E n g l i s h
LINEA
7/24/2019 B_C10038.23757
2/48
7/24/2019 B_C10038.23757
3/48
Positive energy. This is our philosophy. This
is our story. A story which started over fifty years
ago, on the first of May 1945, when Walter Viaro
and Francesco Gusi decided to celebrate Labour
Day in a special way, by setting up a new com-
pany. And so the story of the Vimar V began. A
story written with enthusiasm of people who take
pride in what they do. Energy, positive vision, the
drive to continually improve product quality, the
ability to listen to commercial partners: these are
the ingredients which have enabled the company
to grow to its present size.
VIMARS.p.A. Viale Vicenza, 14 - 36063 Marostica VI - Italy
Tel +3 9. 04 24 .4 88 .6 00 - Fa x +3 9. 04 24 .4 88 .7 09
ww w.v im ar. eu
7/24/2019 B_C10038.23757
4/48
From Italy to the Far East.A consolidated production organisation in Italy. A sales and assembly network that comprises nine international units. Over 2500 employees who work in
sinergy with professionals and operators in the local markets. Continually expanding sales, which this year touched 10,000,000 Euro. A product range with some three thousand codes,
that is able to meet a vast array of standard and special requirements.
Head office.Marostica, where Vimar was first established over fifty years ago, is
the location of the new headquarters. It can be easily reached from the airports of
Venice, Milan, Bologna, Verona and Trieste.
ITALIA
GRECIA
ROMANIA
VENEZUELA
Production sites
SIRIACHINA
CHILE
7/24/2019 B_C10038.23757
5/48
7/24/2019 B_C10038.23757
6/48
Quality system.Laboratory tests and inspections track the products from initial design through to final packaging, to guarantee certified quality.
7/24/2019 B_C10038.23757
7/48
From design to distribution.Seventy thousand square metres of industrial area - the hub of our production energies. Research and development of new products. Design and
product engineering using CAD systems. Working, pressing and moulding of plastics and metals. Fully computerised production, up until packaging and stock control. To answer to the
needs of the markets in real time.
7/24/2019 B_C10038.23757
8/48
From historic cafs to cruise ships. More than twenty-three million residential homes. And prestigious installations in Italy and around the world. From
the historic Caff Pedrocchi in Padua, to the great Fincantieri cruise ships. From the Sangiorgi Theatre in Palermo, to the Malpensa 2000 international airport.
7/24/2019 B_C10038.23757
9/48
From tourist resorts in the Aegean to the Ferretti Motoryachts. From the Venice Ghetto to French Television. From restoration of the national heritage,
to major public works.
7/24/2019 B_C10038.23757
10/48
7/24/2019 B_C10038.23757
11/48
7/24/2019 B_C10038.23757
12/48
7/24/2019 B_C10038.23757
13/4811
LINEA
Index
Equipments from page
Types of mounting 38
IP55 enclosures 41
Accessories 36
Switches 15
Regulation and comfort 35
Acoustic and optical signalling equipments 33
Socket outlets and for signal reception 21
7/24/2019 B_C10038.23757
14/4812
General features
Wrap round structure for theusers complete protection.
Protected terminals withdouble entry and patentedconfiguration.
Balanced and noiselessrocking action.
7/24/2019 B_C10038.23757
15/48
LINEA
13
General features
Socket outlets with shuttered livesocket-contacts (degree of protection2.1 Italian standard CEI 23-16,increased protection CEI 23-50).
Screw covering strips forself-bearing cover plates.
Self-bearing cover plate with captivecross-slotted head screws zinc-platingtreatment and olive green passivation.
Terminals placed on the backof the device. For 1 or 2 rigidor flexible cables, sized from0,75 mm2to 4 mm2.
7/24/2019 B_C10038.23757
16/4814
Switches - TECHNICAL CHARACTERISTICS
Devices
10037
For switch location in the dark:pilot lamp always lit
For switch location in the dark:pilot lamp unlit when the controlled load is on
Indication of the operation state of appliancesnot visible from the operating point:
pilot lamp lit when the controlled load is on
10038
Wiring diagrams for luminous 1 P 1-way and 2-way switches with signalling unit 250 V~
L1 2
L
N
10037
L1 2
L
N
10037
L1 2
L
N
L1 2
3
L1 2
3
L
N
L1 2
3
L1 2
3
L
N
L1 2
3
L1 2
3
L
N
10038 10038
ScopeSwitching on and off of ohm-inductive loads.
lighting circuits for:
- lighting fittings for use with incandescent lamps
- lighting fittings for use with fluorescent lamps with or without
power factor compensation
dedicated circuits for:
- motor driven appliances (fans, ventilators, canopy hoods, etc.)
- switched socket outlets
To locate the switches in case of reduced lighting or darkness,
use luminous switches or switches with luminescent indicator.
Conformity to StandardsLV Directive
Standard EN 60669-1
Technical specifications rated voltage: 250 V~
rated current:
- 10 A for push buttons
- 10 AX or 16 AX for equipments that control circuits of
fluorescent lamps with power factor compensation
contact opening gap: > 3 mm
insulation resistance: > 5 M tested with 500 V d.c.
dielectric strength: > 2000 V~
minimum breaking capacity:
200 operations with 1,25 rated current, 275 V~ cos 0,3 and
200 operations with 1,2 rated current, 250 V~, with load of
tungsten filament lamp (except push buttons)
minimum electrical life:
- 40.000 operations with rated current, 250 V~, cos 0,6
- 10.000 operations for 10 AX equipments (5.000 for 16 AX
equipments) with rated current, 250 V~, with load of
fluorescent lamps
balanced and noiseless rocking action for 1-way, 2-way andreversing switches
noiseless lever action with patented toggle joint for push buttons
7/24/2019 B_C10038.23757
17/4815
LINEA
Switches
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Blank module and cable outlet10319 Blank module10314 Cable outlet with cord-grip
1P 1-way switch 250 V~10000 1P 10 AX 1-way switch10001 1P 16 AX 1-way switch10037 1P 10 AX 1-way switch, luminous, for signalling unit. Supplied without signalling unit10016 2P 16 AX 1-way switch
10319
10016
10314
10037
20
23,5
35,5
1000010001
23,5
35,5
20
R. 3
10
1P 2-way switch 250 V~10004 1P 10 AX 2-way switch
10005 1P 16 AX 2-way switch10038 1P 10 AX 2-way switch, luminous, for signalling unit. Supplied without signalling unit
1000410005
10038
23,5
35,5
23,5
35,5
7/24/2019 B_C10038.23757
18/4816
Devices
Switches - TECHNICAL CHARACTERISTICS
Luminous switchesSignalling units
Insertion of the signalling unit
For switch location in the dark:pilot lamp always lit
Wiring diagram for luminous 1P push button 10268with signalling unit 250 V~
L1 2
L
N
Article Type Supply voltage W max Colour
10490 incandescent 12 V 0,5 white light
10491 incandescent 24 V 1 white light
10492 neon 110 V~ 0,5 red light
10493 neon 250 V~ 0,5 red light
10493.V fluorescent 250 V~ 0,5 green light
10493.AZ fluorescent 250 V~ 0,5 blue light
Range and technical specifications of signalling units
A 1,5 F 400 V~ capacitor should be connected in parallel to neon or fluorescent signallingunits to avoid self-ignition in special circuits
7/24/2019 B_C10038.23757
19/4817
LINEA
Switches
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Special 1P NO push button10270 1P NO 10 A 250 V~ cord-operated push button, with 1,5 m cord
10270
23,5
37
1P NO push button 250 V~10235 1P NO 10 A push button, general symbol10236 1P NO 10 A push button, bell symbol10268 1P NO 10 A push button, general symbol, luminous, for signalling unit. Supplied without signalling unit
10268
10235
23,5
35,5
23,5
35,5
1P reversing switch 250 V~10013 1P 16 AX reversing switch
10013
37,5
26
10236
7/24/2019 B_C10038.23757
20/4818
Devices
Switches - TECHNICAL CHARACTERISTICS
Article Type Supply voltage W Dimensions Colour
07054 incandescent 12 V 3 7x29 mm white light
07055 incandescent 24 V 3 7x29 mm white light
Luminous name-plate push buttonTo be supplied through safety isolating transformer
Microtube lamps
Range and technical specifications for microtube lamps
Cover plates dimensions:
10725: 98x76 mm - flush depth: 33,5 mm
10773: 120x76 mm - flush depth: 33,5 mm
Switches with directional arrowsThese switches can be used for the direct control of motor
driven loads, i.e. roller blinds, gates, etc.
The push buttons may be associated with relays to control
motor driven loads by pulses, i.e. roller blinds, gates, etc.10285 10280
10773
10773 - Microtube lamp fitting/replacement
7/24/2019 B_C10038.23757
21/4819
LINEA
Switches
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EUSide views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
Special 1P NO push button10773 1P NO 10 A 12-24 V (SELV) lightable name-plate push button for 12 or 24 V 3 W 7x31 mm lamp - provided with resin self-bearing cover
plate, ivory, for 3-module mounting boxes and screw covering strips 10797.01
10773
Switches 250 V~ with directional arrows10285 1P 10 AX (3 terminals) 2-way switch, with directional arrows and central OFF position10280 1P 10 A (3 terminals) 2-way push button, with directional arrows and central OFF position
1028010285
43,5
31,5
7/24/2019 B_C10038.23757
22/4820
Devices
Socket outlets - TECHNICAL CHARACTERISTICS
Technical specifications of Italian standard socketoutlets rated voltage: 250 V~
rated current: 10 A or 16 A
shuttered live socket-contacts (degree of protection 2.1
according to Italian standards CEI 23-16, increased
protection according to Italian standard CEI 23-50)
insulation resistance tested with 500 V d.c.: > 5 M;
dielectric strength: 2000 V~
breaking capacity: 50 operations (plug insertion and
withdrawn) with 1,25 rated current 275 V~ cos 0,6
electrical life: > 5000 (plug insertion and withdrawn) with rated
current and voltage cos 0,6
resilient wrap socket-contacts
priority of connection on earthing socket-contacts
ScopeSupply of electrical appliances, portable lighting fittings, etc.
Conformity to StandardsItalian Standard CEI 23-50 (IEC 60884-1)
5
5 26
4
4
19
4
4
18
5
5
5
26
4
4
4
19
Plugs standard VIMAR products
2P 2.5 A
2P+E 20 A 6
6
5
26
MILLE
SUPERNOVA
MILLE
SUPERNOVA
MILLE
SUPERNOVA
SUPERNOVA
Matching plugs and socket outles standards
P11
10140
01020 - 01020.B
01040 - 01040.B
01045 - 01045.B
01026 - 01026.B
01043 - 01043.B
01048 - 01048.B
P17/11
10145
01020 - 01020.B
01040 - 01040.B
01045 - 01045.B
01021 - 01021.B
01041 - 01041.B
01046 - 01046.B
01021 - 01021.B
01041 - 01041.B
01046 - 01046.B
00200 - 00200.B 00200 - 00200.B
---
---
---
00202 - 00202.B
00207 - 00207.B
00212 - 00212.B
---
---
---
00201 - 00201.B
00206 - 00206.B
00211 - 00211.B
00201 - 00201.B
00206 - 00206.B
00211 - 00211.B
---
--- ---
19
26
19
2P 10 A
2P 16 A
2P+E 10 A
2P+E 16 A
S10
S11
SPA11
S11
S11
SPA11
S11
S17
SPA17
S17
S17
SPA17
S17
S10
S10
Europlug
S16
Plugs and socket outlets - matching possibilities
7/24/2019 B_C10038.23757
23/4821
LINEA
*Only for Countries not members of the EUSide views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
Socket outlets
Italian standard socket outlet 250 V~10140 2P+E 10 A SICURY socket outlet, Italian standard P1110145 2P+E 16 A Bpresa SICURY socket outlet, Italian standard P17/11
10140
24,5
32,5
10145
24,5
32,5
7/24/2019 B_C10038.23757
24/4822
Devices
Socket outlets - TECHNICAL CHARACTERISTICS
5
5 26
4
4
19
4
4
18
5
5
5
26
4
4
4
19
Plugs standard VIMAR products
2P 10 A
2P 2.5 A
2P 16 A
2P+E 10 A
2P+E 16 A
MILLE
SUPERNOVA
MILLE
SUPERNOVA
MILLE
SUPERNOVA
SUPERNOVA
Plugs and socket outlets matching possibilities
01020 - 01020.B
01045 - 01045.B
01026 - 01026.B
01048 - 01048.B
01021 - 01021.B
01046 - 01046.B
00200 - 00200.B
01020 - 01020.B
01045 - 01045.B
S10
S10
S10 00200 - 00200.B
---
---
00202 - 00202.B
00212 - 00212.B---
00230 - 00230.B
---
00201 - 00201.B
00211 - 00211.B
---
01021 - 01021.B
01046 - 01046.B
00201 - 00201.B
00211 - 00211.B
2P 16 A
19
4,8
2P+E 16 A
19
4,8
4,8
4,8
00231 - 00231.B
00241 - 00241.B
00230 - 00230.B
00231 - 00231.B
00241 - 00241.B
P30
19
12,7SICUREZZA
UNIVERSALE
26
19
Europlugs
S11
S11
S11
S11
S16
German
standard
German
standard
German+ French
standard
German
+ French
standard
S17
S17
S17
S17
SICURY socket outlets, universal, other characteristics:
- abbreviations I and D (Italian and German standards) and
USA 2P (American standard) positioned next to the holes of
the socket outlets for a correct matching
- no earth connection is realized with 2P+E 16 A 250 V~ French
standard plug
Cover plates dimensions:
- 10714: 98x76 mm - flush depth: 40 mm
- 10764: 120x76 mm - flush depth: 40 mm
- 10765: 120x76 mm - flush depth: 40 mm
- 10719: 98x76 mm - flush depth: 40.5 mm
- 10768: 120x76 mm - flush depth: 40.5 mm
7/24/2019 B_C10038.23757
25/4823
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Socket outlets
Italian standard socket outlet 250 V~10714 2P+E 16 A SICURY socket outlet, Italian standard P30 (lateral and central earth contacts) with ivory self-bearing cover plate for round
mounting boxes and screw covering strips 10798.01
10764 As above, with ivory self-bearing cover plate for rectangular mounting boxes and screw covering strips 10797.0110765 As above + 1-gang, with ivory self-bearing cover plate for rectangular mounting boxes and screw covering strips 10798.01
10714 10764
10765
Italian standard socket outlet 250 V~10719 2P+E 16 A SICURY socket outlet, universal, for 2P 2,5 A Europlugs, 2P and 2P+E 10 A and 16 A Italian standard plugs, 2P+E 16 A
250 V~ German standard plugs, 2P 15 A 125 V~ American standard plugs with non-polarized flat blades - with ivory self-bearing coverplate for round mounting boxes and screw covering strips 10798.01.No earth connection with French standard plug
10768 2P+E 16 A SICURY socket outlet, universal, for 2P 2,5 A Europlugs, 2P and 2P+E 10 A and 16 A Italian standard plugs, 2P+E 16 A250 V~ German standard plugs, 2P 15 A 125 V~ American standard plugs with non-polarized flat blades - with ivory self-bearing coverplate for rectangular mounting boxes and screw covering strips 10797.01.No earth connection with French standard plug
10719 10768
7/24/2019 B_C10038.23757
26/4824
Devices
Other standard plugs and socket outlets
Italian standard plug S10
Italian standard plug S11
2P 2,5 A Europlug
2P+E 16 A 250 V~ German standard plug
2P+E 16 A 250 V~ German/French standard plug
2P 15 A 125 V~ American standard plug
2P 15 A 250 V~ American standard plug
2P+E 15 A 127 V~ American standard plug
2P+E 15 A 250 V~ American standard plug
10194 10195 - 10196 10197
Standard plug matching the socket outlet
Standard plug matching the socket outlet
without continuity of earth connection
10192 10191
10200
2P+E 10 A 250 V~ Argentinian standard plug
2P+E 20 A 250 V~ Argentinian standard plug
10206
Socket outlets - TECHNICAL CHARACTERISTICS
Foreign standard VIMAR plugs00230: 2P+E 16 A plug 250 V~ German standard
00231: 2P+E 16 A plug 250 V~ German/French standard
00241: 2P+E 16 A plug 250 V~ German/French standard
01096: 2P+E 15 A plug 127 V~ American and Saudi Arabian standard
01105: 2P+E 15 A plug 250 V~ American standard
7/24/2019 B_C10038.23757
27/4825
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Socket outlets
Other standard socket outlet*10192 2P 15 A 250 V~ socket outlet for 2P 15 A 125 V~ American standard plugs with non-polarized flat blades and for 2P plugs with 4 mm
and 4,8 mm pins, 19 mm distance between centres*10191 2P+E 15 A 250 V~ socket outlet, for 2P 15 A 125 V~ American standard plugs with polarized and non polarized flat blades and for 2P
and 2P+E plugs with 4 mm pins, 19 mm distance between centres
10191
10192
24
35
21,5
32,5
Other standard socket outlets*10194 2P 15 A 250 V~ socket outlet, for 2P American standard plugs (15 A 125 V~ polarized and non-polarized + 15 A 250 V~ flat blades)
and for 2P plugs with 4 mm and 4,8 mm pins, 19 mm distance between centres*10195 2P+E 15 A 127 V~ socket outlet, American and Saudi Arabian standards*10197 2P+E 15 A 250 V~ socket outlet, American standard*10196 Two 2P+E 15 A 127 V~ socket outlets, American and Saudi Arabian standards - 3 modules
10195
1019610197
10194
26
37
24
35
24
35
21,5
32,5
Other standard socket outlet*10200 2P+E 10 A 250 V~ socket outlet, Argentinian standard
*10206 2P+E 20 A 250 V~ SICURY socket outlet, Argentinian standard - 2 modules
10206
10200
24
35
21,5
32,5
7/24/2019 B_C10038.23757
28/4826
Devices
Socket outlets for signal reception - TECHNICAL CHARACTERISTICS
Telephone socket outlets
Technical specifications connection with screw terminals
TX
L2 L1
TS TSTX
T2
L2 L1
TSTX
T
A
2
B
L2 L1
10215
RJ11
4 contacts
10216
RJ12
6 contacts
10217
RJ45
8 contacts
L1
TS
L2
TX
10215
L1
TS
L2
TX
10215
L1
L2
L1
TS
L2
TX
10215
NOTEL1-TS line is interrupted when the socket connectors are wired as shown above: if thetelephone plug is withdrawn from a socket connector, all socket connectors connectedafter it in the installation would be disconnected. To overcome this incovenience, insert aplug with L1-TS bridge.
Wiring diagram for 10215Wiring diagrams for telephone socket outlets
7/24/2019 B_C10038.23757
29/4827
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Socket outlets for signal reception
Special socket outlet10159 2P 6 A 24 V (SELV) polarized socket outlet for 01616 and 01617 plugs (1 3 mm pin and 1 4 mm pin, 12,4 mm distance between
centres). For Hi-Fi installations, HFTR reception etc..
10159
18
26
Phone jacks10215 RJ11 phone jack, 6-position 4-conductor (6/4), screw terminals10216 RJ12 phone jack, 6-position 6-conductor (6/6), screw terminals10217 RJ45 phone jack, 8-position 8-conductor (8/8), screw terminals
34,5
42,5
102151021610217
7/24/2019 B_C10038.23757
30/4828
Devices
Coaxial TV-RD-SAT 5-2400 MHz socket outlets - TECHNICAL CHARACTERISTICS
Scope connect user equipments to systems for the distribution of ana-
logic or digital sound and video signals, from terrestrial, satellite
or cable link, in the 5-2400 MHz frequency band
permit the connection of a single device (e.g. TV or SAT
receiver)
can be used for satellite Internet applications and, thanks to the
5-40 MHz return channel, also for interactive functions (hotel
communications and cable TV)
a choice of single connection socket outlets allows the passage
of d.c. current and control signals, and of through-line socket
outlets with three different attenuation ratings and ensures
optimal utilisation on any type of individual or central
distribution configuration (see table on the left)
The range
1 single connection socket outlet which allows the passage of
d.c. current and control signals (24 V 500 mA max)
3 through-line socket outlets with:- connection attenuation 10 dB
- connection attenuation 15 dB
The through-line socket outlets can become line-end socket
outlets if closed with the special terminal resistor 16330.
They allow d.c. current and control signals (24 V 500 mA max)
to pass through the line, but not to the user port (IEC 60169-2
male connector).
Technical specifications frequency range: 5-2400 MHz
output: IEC 60169-2 male connector
return channel in 5-40 MHz band shielding efficiency: A class
cable dimensions:
- internal wire 3 mm max
- external insulating sheath: 5-7 mm
Conformity to StandardsEN 50083-1, EN 50083-4 Standards
EMC Directive
EN 50083-2 Standard
How to connect
Programmes - Applications
Terrestrial TV
Radio
receiver
STB
(Set Top Box)
Satellite TV and radio
Programmes - Applications
Terrestrial radio
SAT
IEC 60169-2 male
IEC 60169-2 male
IEC 60169-2 male
IEC 60169-2 male
Coaxial cable connection SCART cable connection
Programmes - Applications
Cable TV (CATV)
Interactive hotel communications
Programmes - Applications
Socket type
Single connection 1 dB
Attenuation type
Connection attenuation (dB)
Frequencies (MHz)
40-470 470-862 862-950 950-1750 1750-24005-40
0,2 0,3 0,3 0,5 0,70,1
Through-line 10 dB
Connection attenuation (dB) 10 10 10 10 11,511,5
Throughpass attenuation (dB) 1,2 1,2 1,3 1,7 21,5
Through-line 15 dB
Connection attenuation (dB) 15 15 15 15 1515
Throughpass attenuation (dB) 0,8 0,8 0,9 1,1 1,40,8
i i
i
Attenuations
Multiple socket outlets in cascade
Multiple parallel connected socket outlets
Combined cascade/parallel connectedMulti-switch for satellite signal distribution
Multi-switch for combined terrestrial and satellite signal distribution
Combined cascade/parallelwith IF-IF conversion unit for single-cable distribution of combined terrestrial and satellite signals
Combined cascade/parallel with modular unit for feedingterrestrial and satellite programs in the 40-862 MHz band(terrestrial)
Some examples of the supported system topologies
7/24/2019 B_C10038.23757
31/4829
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Coaxial TV-RD-SAT 5-2400 MHz socket outlets
200
200
15 82
120 12
0
15 82
TV-RD-SAT through-line socket outlet
Cable drop from below Cable drop from above Closing the cord-grip
Coaxial TV-RD-SAT 5-2400 MHz socket outlet10190.01 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, single connection,with IEC 60169-2 male connector, connection attenuation 1 dB.
Allows the passage of d.c. current and control signals (24 V 500 mA max).
10190.01
28,5
36,5
10190.1010190.15
28,5
36,5
Coaxial TV-RD-SAT 5-2400 MHz socket outlet10190.10 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, through-line, with IEC 60169-2 male connector, connection attenuation 10 dB10190.15 As above, connection attenuation 15 dB
IEC 60169-2 male
24 V 500 mA max
Ad: 1 dB
Single-connection
IEC 60169-2 male
Ad: 10 dB
15 dB
20 dB
Through-line
7/24/2019 B_C10038.23757
32/4830
Devices
TV socket outlets - TECHNICAL CHARACTERISTICS
TV socket outlet
without attenuation
Amplifier
unit
TV socket
outlets
without
attenuation
Tap-off
Amplifier
unit
TV socket outlets
without attenuation
TV socket outlet
for line end
Amplifier
unit
08175
Directional
TV socket outlets
Fig. 1 Single down-line Fig. 2 Collective installationline from distribution boxes
Fig. 3 Collective installationwith looped distribution
Fig. 4 Collective installationwith looped distribution
Coaxial 40-862 MHz TV socket outlets
Technical specifications patented cord-grip for easy and reliable connection of the
coaxial cable
captive screw terminals and toothed pressure plate, for the
central conductor
realization of the articles with 9,5 output with relevant
capacitor series connected directly to the internal terminal, or
through an adequate radiofrequency repeater, to protect the
installation against dangerous voltages from connected
receivers ( 4.1.02 Italian standard CEI 12-15)
TV socket outlet without attenuation: to be used for single
down-lines or for collective installation lines from distribution
boxes or tap-offs (Fig. 1 and 2)
through-line TV socket outlet and line-end socket outlet:
resistive type with connection attenuation 20 dB for installations
with several socket outlets connected in cascade (looped
distribution - Fig. 3)
TV directional socket outlet, microstrip parallel-line type (see
table for attenuations); for collective installations with looped
distribution (figure 4). The line-end socket outlet shall be fitted
with 75 resistive load 08175
Dimensions (in mm)
01644
17,5
33
44
01645
17,5
33
44
01634 16,5
17
41
01635 16,5
17
41
01654
9
13,
5
19,
8
7/24/2019 B_C10038.23757
33/4831
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
TV socket outlets
Coaxial TV 40-862 MHz socket outlet*10178 Coaxial TV socket outlet, single connection, with IEC 60169-2 female connector*10179 Coaxial TV through line, with IEC 60169-2 female connector, throughpass attenuation 3 dB, connection attenuation 20 dB
30,5
38,5
1017810179
Coaxial F-type socket outlet and terminal resistor10188 Coaxial socket outlet with F-type female connector (IEC 60169-24).
For frequencies up to 2400 MHz. In/out connection with F-type male connector 01654
16330 Z 75 terminal resistor for TV-RD-SAT socket outlets line end, for frequencies up to 2400 MHz
10188
30,5
16330
Coaxial TV-RD-SAT connector for frequencies up to 2400 MHz01644 Coaxial male connector IEC 60169-2, axial cable entry - Z 75 , white
01645 Coaxial female connector IEC 60169-2, axial cable entry - Z 75 , white01634 Coaxial male connector IEC 60169-2, 90 cable entry - Z 75 , white01635 Coaxial female connector IEC 60169-2, 90 cable entry - Z 75 , white01654 Coaxial male connector type F - Z 75 , for cable RG59 ( external 7 mm).For 20318, 16331, 14318, 08186 and 10188
01644 01645 01654 01634 01635
7/24/2019 B_C10038.23757
34/4832
Devices
Signalling - Protection - TECHNICAL CHARACTERISTICS
Bells snd buzzers12 V and 24 V bells and buzzers are to be supplied through
safety isolating transformer
Conformity to StandardsLV Directive for 10349, 10363
Luminous indicator unitsMicrotube lamps
Conformity to StandardsLV Directive
A 1,5 F 400 V~ capacitor should be connected in parallel to neon or fluorescent microtubelamps to avoid self-ignition in special circuits
Assembly
Fuse carrier
Conformity to StandardsLV Directive
Fuse replacing
Colour of Article Type Voltage W Lamp Bulb Lamp Diffuseremitted light dim.(mm) dim. (mm) colour colour
white 07054 incandescence 12 V 3 W 7x31 8x15 white white
white 07055 incandescence 24 V 3 W 7x31 8x15 white white
orange 07054 incandescence 12 V 3 W 7x31 8x15 white orange
orange 07055 incandescence 24 V 3 W 7x31 8x15 white orange
red 07053 neon 110 V~ 0,5 W 6,3x28 red red
red 07052 neon 250 V~ 0,5 W 6,3x28 red red
green 07052.V fluorescent 250 V~ 0,5 W 6,3x28 green green
blue 07052.AZ fluorescent 250 V~ 0,5 W 6,3x28 blue white
Note Colour of emitted light = colour of microtube lamp + diffuser colour
Technical specifications of microtube lamps
7/24/2019 B_C10038.23757
35/4833
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Signalling - Protection
Bell and buzzer10349 Bell, 230 V~ 50 Hz 8 VA10363 Buzzer, 230 V~ 50-60 Hz 8 VA
32
40
34
42
10349 10363
Luminous indicator unit10306 Indicator unit for 6,3x28 mm or 7x31 mm lamp, red diffuser. Provided without lamp
10306
23
31,5
Protection device10370 1P 16 A 250 V~ fuse carrier for 5x20 mm and 6,3x32 mm miniature fuses. Supplied without fuse
10370
23
31
7/24/2019 B_C10038.23757
36/4834
Devices
Regulation - Comfort - TECHNICAL CHARACTERISTICS
10336 and 10337 - Wiring diagram
Fuse carrier with
F5AH fuse
Fuse carrier with
F5AH fuse
Fuse carrier with
F5AH fuse
L
N
Fuse carrier with
F5AH fuse
Fuse carrier with
F5AH fuse
L
N
L
N
L
N
L
N
Relay
10340 - Dimmer fo resistive loads
Conformity to StandardsLV Directive
EMC Directive
EN 60669-2-1 Standard
1 2 3 4
L
Diagram 1
N
1 2 3 4
L
Diagram 2
N
1 2 3 4
L
Diagram 3
N
10472 - Wiring diagrams
10472 - Electronic time delay switch
Technical specifications supply voltage: 230 V~ 10% 50-60 Hz
output relay with contact rating:
- 6 A 230 V~ for incandescent lamps
- 2 A 230 V~ for fluorescent lamps and motor-driven equipments
time setting: 30 s to 15 min it can be connected in parallel with non luminous NO push
buttons
Operating control of lighting with time delay switching off through built-in
push button or through parallel connected non luminous NO
push buttons:
- diagram 1: the delay time cycle is resettable only when lightsare off
- diagram 2: the delay time cycle is resettable also when lights
are on, pressing on the built-in push button only
control of lights and household exhaust fans through 2P 1-way
switch:- diagram 3: simultaneous operation of lights and exhaust fan.
The delay time cycle starts when lights are switched off and itbe reset by pressing the built-in push button. The exhaust fan
switches off at the end of the delay t ime cycle.
Conformity to StandardsLV Directive
EMC DirectiveEN 60669-2-1 Standard
Trimmer forthe delay time regulation
Control push button
Pilot lamp forlocation in the dark
7/24/2019 B_C10038.23757
37/4835
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
*Only for Countries not members of the EU
Regulation - Comfort
1033710336
36
48
Dimmers for resistive and inductive loads*10336 Dimmer, supply voltage 230 V~ 50-60 Hz for: 60-900 W incandescent lamps, 60-300 VA ferromagnetic transformers, without radio
interference suppression filter, control and regulation by rotary potentiometer, visible in darkness*10337 Dimmer, supply voltage 120 V~ 50-60 Hz for: 30-500 W incandescent lamps, 30-300 VA ferromagnetic transformers, without radio
interference suppression filter, control and regulation by rotary potentiometer, visible in darkness
10472
32,5
43
Electronic time delay switch10472 Electronic time delay switch for control of stair lighting, utility rooms, exhaust fans, NO 6 A 230 V~ relay output, visible in darkness,
supply voltage 230 V~ 50-60 Hz - 2 modules
7/24/2019 B_C10038.23757
38/4836
Microtube lamps and fuses
Accessories
Incandescent microtube lamps07054 7x31 mm, 8x15 mm bulb, 12 V 3 W, white light07055 7x31 mm, 8x15 mm bulb, 24 V 3 W, white light
07054
07055
Fuses07050.02 2 A 250 V~ miniature fuse, 5x20 mm, glass tube07050.04 4 A 250 V~ miniature fuse, 5x20 mm, glass tube07050.06 6 A 250 V~ miniature fuse, 5x20 mm, glass tube07050.08 8 A 250 V~ miniature fuse, 5x20 mm, glass tube
07050.10 10 A 250 V~ miniature fuse, 5x20 mm, glass tube07050.HF.2.5 F2,5AH fast-blow fuse with high breaking capacity, breaking capacity 1500 A, steatite tube07050.HF.5 F5AH 6,3x32 fast-blow fuse with high breaking capacity, breaking capacity 1500 A, steatite tube07050.HFF.16 FF16AH extra fast-blow fuse with high breaking capacity, breaking capacity 1500 A, steatite tube
07050... 07050.HF... 07050.HFF.16
Neon and fluorescent microtube lamps07053 Neon glow lamp, 6,3x28 mm, 110 V~ 0,5 W, red. Lamp life: 15000 hours (with rated voltage)
07052 Neon glow lamp, 6,3x28 mm, 250 V~ 0.5 W, red. Lamp life: 15000 hours (with rated voltage)07052.V Fluorescent lamp, 6.3x28 mm 250 V~ 0.5 W, green. Lamp life: 10000 hours (with rated voltage)07052.AZ Fluorescent lamp, 6.3x28 mm 250 V~ 0.5 W, blue. Lamp life: 5000 hours (with rated voltage)The above indicated colour is the colour of emitted light
07053...07052...
7/24/2019 B_C10038.23757
39/4837
LINEA
Side views show the overall dimensions and the flush depth in mm
Mounting boxes and cover plates, page 38
Signalling units - Screws
Signalling unit10490 Incandescent signalling unit, 12 V~ 0,5 W, white light. Life of the signalling unit: 10000 hours (with rated voltage)10491 Incandescent signalling unit, 24 V~ 0,5 W, white light. Life of the signalling unit: 10000 hours (with rated voltage)10492 Neon signalling unit, 110 V~ 0,5 W, red light. Life of the signalling unit: 25000 hours (with rated voltage)10493 Neon signalling unit, 250 V~ 0,5 W, red light. Life of the signalling unit: 25000 hours (with rated voltage)
10493.V Fluorescent signalling unit, 250 V~ 0,5 W, green light.Life of the signalling unit: 10000 hours (with rated voltage)
10493.AZ Fluorescent signalling unit, 250 V~ 0,5 W, blue light. Life of the signalling unit: 5000 hours (with rated voltage)
1049010491
10492...
10493...
Technical specifications
Incandescent lamp life: 200 hours.
Note
Lamp life can be considerably increased by lowering the
power supply voltage: for example, a 20% reduction in sup-
ply voltage increases lamp life by approximately a factor of
10.
The table overleaf shows the variations in:
lamp life
current
efficiency
luminous flux
obtained by varying the supply voltage.
50
Life
LifeE
fficien
cy
Efficie
ncy
Lumin
ousflux
Lumin
ousflu
x
30
20
10
8
6
4
2
100% = 1
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,15
7
6
5
4
3
2
1,5
100% = 1
0,0260% 80% 100% 120% 140%
(100% = rated voltage)
0,03
0,04
0,06
0,08
0,1
0,2
0,3
0,4
0,8
0,60,5
1,2
M
ultiplicationfactor
Supply voltage
Curren
t
Current
Incandescent lamps
Screw07935 19 mm length, with cross-slotted head for mounting frame fixing on mounting boxes07937 35 mm length, with cross-slotted head for mounting frame fixing on mounting boxes07939 50 mm length, with cross-slotted head for mounting frame fixing on mounting boxes
07935 07937 07939
7/24/2019 B_C10038.23757
40/4838
Flush mounting - 1- and 2-module self-bearing cover plates
V71001*GW 650 C, light blue
V71001.AU*GW 960 C, black*) Not suitable for:
10064..., 10065..., 10081...
Flush mounting - 1-, 2- and 3-module cover plates
Flush and surface mounting
Types of mounting
VIMAR VIMAR
10705With claws.
Dimensions:
98x76 mm
10706With claws.
Dimensions:
98x76 mm
VIMAR
VIMAR
VIMAR
VIMAR
VIMARVIMAR
VIMAR
VIMA R
09968*,ivory*) Not suitable for: 10064..., 10065..., 10081...
V71303GW 650 C,
light blue
V71303.AUGW 960 C, black
V71613For hollow walls
GW 850 C,
light blue
09973,ivory
09973.ARAL 9001 ivory
09974, ivory
09974.ARAL 9001 ivory
107351-module.
Dimensions:
120x76 mm
106351-module.
Dimensions:
119,5x75,5 mm
10735.U1-module.
Dimensions:
76x120 mm
107362-module.
Dimensions:
120x76 mm
106373-module.
Dimensions:
119,5x75,5 mm
106362-module.
Dimensions:
119,5x75,5 mm
107373-module.
Dimensions:
120x76 mm
10660Blaking module.
Dimensions:
119,5x75,5 mm
105313-module,with screws
7/24/2019 B_C10038.23757
41/4839
LINEA
Flush mounting - 5-, 6- and 3+3-module self-bearing cover plates
Flush and surface mounting - Cover plates
VIMAR
VIMAR
VIMAR
107384-module.
Dimensions:
142,5x76 mm
10739
5-module.Dimensions:
164,5x76 mm
107406-module (3+3).
Dimensions:
164,5x76 mm
V71304GW 650 C,
light blue
V71304.AUGW 960 C, black
V71614For hollow walls
GW 850 C,
light blue
09996GW 650 C,
light blue
09996.AUGW 960 C, black
V71305
GW 650 C,light blue
V71305.AUGW 960 C, black
Range of cover plates
Anodized aluminium cover plate, Gold Self-bearing cover plate
with ivory strips
7/24/2019 B_C10038.23757
42/4840
ScopeThe IP55 surface boxes extend the utilization possibilities of
Linea series in locations where the IP55 protection degree is re-
quired (industrial and agricultural environments, buildings sites,
tourists harbours, sport installations, gardens, camping sites,
ecc.).
They furthermore permit to realize electrical installations in loca-
tions where explosions or fires are liable to occur, in compliance
with Italian standards EN 60079 and CEI 64-2.
Technical specifications protection degree Ip 55 in compliance with CEI EN 60529
(CEI 70-1)
granted if installation has been done according to good engi-
neering practice, with the use of appropriate cable/conduit en-
tries, glands and coupling accessories and with closed cover
resistance to abnormal heat and to fire (Glow Wire test):
650 C
resistance to ageing according to CEI 23-48: 7 days at 70 C resistance to heat: ball-pressure test according to Italian
Standard CEI 23-48: 70 C
Conformity to StandardsLV Directive
EN 60670-1 Standard
IP55 boxes - TECHNICAL CHARACTERISTICS
Surface mounting boxes
12330
68 65,5
83
12335
68 65,5
83
VIMAR
12352
68 65,5
83
12331
68 65,5
83
12202
68 65,5
83
12201
68 65,5
83
Dimensions (in mm)
7/24/2019 B_C10038.23757
43/4841
LINEA
IP55 boxes
1- and 2-module box12201 1-module surface mounting box12202 2-module surface mounting box
1220212201
Devices supplied with surface mounting box12331 2P+E 16 A 250 V~ SICURY socket outlet, Italian standard P30 (lateral and central earth contacts)12335 2P+E 16 A 250 V~SICURY socket outlet, universal, for 2P 2,5 A Europlugs, 2P and 2P+E 10 A and 16 A Italian standard plugs,
2P+E 16 A German standard plugs, 2P 15 A 125 V~ American standard plugs with non-polarized flat blades.No earth connection is realized with French standard plug
12330 2P+E 16 A 250 V~ SICURY socket outletm German standard12352 1P NO 10 A 12-24 V (SELV) push button, with luminous name-plate, for 12-24 V 3 W 7x31 mm microtube lamps.
Supplied without lamp
12335
12330
12331
12352
7/24/2019 B_C10038.23757
44/4842
Information
Marks and certifications
General notesVIMAR products are built according to all safety measure, in
full compliance with the requirements of the Laws 186/68 and
791/77.
If they are assembled, installed and used properly, they do not
constitute a hazard to the safety of people, pets and property.
VIMAR realizes electrical installations in accordance with the
requirements of the electrical installation Laws 46/90.
All the VIMAR products which are regulated by EEC Directives
(EMCDirective, LV Directive, R&TTE Directive) are in compli-
ance with the essential requirements thereof.
With the CE mark, they may be marketed and used within the
European Union without further formalities.
The CE MARKING placed on the product and/or on the
packing and/or on any usage warnings that may accompany
the product, "indicate compliance with the Directives" above
mentioned.
Product managerCertification by recognized third-party boards is voluntary and
adds value to the product provided with a mark of compliance.
In some countries certification is compulsory and represents
an essential market requisite.
Certified products are subject to permanent inspection by the
recognized third-party boards, through both inspections of the
manufacturing site and market spot-checks.
The trademarks and certifications listed below refer to the
products which dave been approved as of the printing date
of this catalogue.
Approval may be in progress for other products, or unplanned
for those products which are not considered by standards,
yet, and thus not subject to marking procedures.
Marks and certifications
IMQ - Italy IMQ - Italy LCIE - France
SIQ - Slovenia VDE - Germany GOSSTANDART - Russia
TSE - Turkey
MEEI - HungaryKONCAR - Croatia
UL - USA ENEC IMQ ENEC VDE
Istituto Italiano delMarchio di Qualit
IMQ - ItalyMarchio IMQ-UNICIG
per gli apparecchi utilizzatoria gas e relativi accessori
Certificato conSorveglianza IMQ
Laboratoire Centraldes Industries Electriques
Slovenian Institute ofQuality andMetrology
Testing and CertificationInstitute
Turkish StandardsInstitution
BBJ-SEP - PolandAssociation of PolishElectrical Engineers
Testing laboratory BBJ-SEP
EZ - Czech Republic AENOR - SpainSpanish Associationfor Standardisationand Certification
ElectrotechnicalTesting Institute
Hungarian Institute forTesting and Certificationof Electrical Equipment
Electrical EngineeringInstitute
UnderwritersLaboratories Inc.
European NormsElectrical Certification
European NormsElectrical Certification
NOM - Mexico
1
RAEE Directive
2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17
22
18 19
IMQ - ItalyMarchio IMQ
Sistemi di Sicurezza
21
IRAM - ArgentinaIstituto Argentinode Normalizacin
20
CERT
IFI
CACI
NDE C
ONFORMIDADDELAFA
BRIC
ACIN
SELLO
2071
SEV - Switzerland
CQC - China
Swiss ElectrotechnicalAssociation
China QualityCertification Center
ENEC VEEuropean Norms
Electrical Certification
IQC - ArgentinaInternational
Quality Certification
24 25
CSA - CanadaCanadian Standard
Association
99
The equipment marked with this symbol are included in the application of the RAEE Directive and will have to be disposed separately from the urban
waste and returned to the distributor at the moment of the purchase of a new equivalent equipment.
23
INMETRO - BrazilTUV Rheinland do Brasil
7/24/2019 B_C10038.23757
45/4843
LINEA
Index
Article Description Packquantity
Page Marks(See the marks table
page 42)
Notes
V71001 Flush mounting box 60mm light blue 200 38 1 - 8
V71001.AU Flush mounting box 60mm light black 200 38 1 - 8
V71303 Flush mounting box 3M light blue 300 38 1 - 8
V71303.AU Flush mounting box 3M black 300 38 1 - 8V71304 Flush mounting box 4M light blue 96 39 1 - 8
V71304.AU Flush mounting box 4M black 96 39 1 - 8
V71305 Flush mounting box 5M light blue 84 39 1 - 8
V71305.AU Flush mounting box 5M black 84 39 1 - 8
V71613 Flush-mount box 3M for hollow walls blue 135 38 1
V71614 Flush-mount box 4M for hollow walls blue 110 38 1
01634 TV-RD-SAT male 90-connector white 50 31 1
01635 TV-RD-SAT female 90-connector white 50 31 1
01644 TV-RD-SAT male axial connector white 50 31 1
01645 TV-RD-SAT female axial connector white 50 31 1
01654 TV-RD-SAT F type male connector 100 31 1
07050.02 2A 5x20mm fuse 50 3607050.04 4A 5x20mm fuse 50 36
07050.06 6A 5x20mm fuse 50 36
07050.08 8A 5x20mm fuse 50 36
07050.10 10A 5x20mm fuse 50 36
07050.HF.2.5 5x20mm F2,5AH quick-acting fuse 50 36
07050.HF.5 5x20mm F5AH quick-acting fuse 50 36 07050.HFF.16 5x20mm FF16AH extra quick-acting fuse 50 36
07052 250V 0,5W neon lamp red 50 3607052.AZ 250V 0,5W fluorescent lamp light blue 50 3607052.V 250V 0,5W fluorescent lamp green 50 3607053 110V 0,5W neon lamp red 50 3607054 12V 3W incandescent lamp white 50 3607055 24V 3W incandescent lamp white 50 3607935 Screw for frame fixing - 19mm 100 3707937 Screw for frame fixing - 35mm 500 3707939 Screw for frame fixing - 50 mm 500 3709968 Surface-box+bottom 3M 40mm depth 20 38 1
09973 Surface-box 3M 40mm depth white 20 38 1
09973.A Surface-box 3M 40mm depth ivory 20 38 1
09974 Surface-box 3M 48mm depth white 20 38 1
09974.A Surface-box 3M 48mm depth ivory 20 38 1
09996 Flush-box 6(3+3)M blue 20 39 1
09996.AU Flush-box 6(3+3)M self-extinguish black 20 38 1
100001P 10AX 1-way switch
50 151 - 10 - 14 - 19 - 20
10001 1P 16AX 1-way switch 50 15 1 - 10 - 14 - 19 - 20
10004 1P 10AX 2-way switch 50 15 1 - 10 - 14 - 19 - 20
10005 1P 16AX 2-way switch 50 15 1 - 10 - 14 - 19 - 20
10013 1P 16AX reversing switch 50 17 1 - 10 - 14 - 19 - 20
10016 2P 16AX 1-way switch 50 15 1 - 10 - 14 - 19 - 20
10037 1P 10AX 1-way switch luminous 50 15 1 - 10 - 14 - 19 - 20
10038 1P 10AX 2-way switch luminous 50 15 1 - 10 - 14 - 19 - 20
10140 2P+E 10A P11 outlet 50 21 1
10145 2P+E 16A P17/11 outlet 50 21 1
10159 Polarized 2P 6A 24V SELV outlet 50 27
* 10178 TV 9,5IEC single conn. outlet 50 31* 10179 TV 9,5IEC through-line outlet 50 31
10188 F type female socket connector 10 31 1
10190.01 TV-RD-SAT single conn.male outlet 1dB 20 29 1
10190.10 TV-RD-SAT through-line male outlet 10dB 20 29 1
10190.15 TV-RD-SAT through-line male outlet 15dB 20 29 1
* 10191 2P+E 15A USA+EU outlet - 4mm 50 25 19* 10192 2P 15A USA+EU outlet - 4,8mm 50 25 19* 10194 2P 15A USA+EU outlet - 4,8mm 50 25 19* 10195 2P+E 15A USA+SASO outlet 50 25 19* 10196 Two 2P+E 15A USA+SASO outlets 20 25 19* 10197 2P+E 15A American outlet 50 25 19* 10200 2P+E 10A Argentinian outlet 50 25 20* 10206 2P+E 20A Argentinian outlet 10 25 20
10215 RJ11 phone jack 6/4 20 2710216 RJ12 phone jack 6/6 20 2710217 RJ45 phone jack 8/8 20 2710235 1P NO 10A push button general symbol 50 17 1 - 10 - 14 - 19 - 20
10236 1P NO 10A push button bell symbol 50 17 1 - 10 - 14 - 19 - 20
10268 1P NO 10A push button general symbol lms 50 17 1 - 10 - 14 - 19 - 20
10270 1P NO 10A cord-operated push button 20 17 1 - 10 - 14 - 20
10280 1P 10A 2-way push button 20 19 1 - 10 - 14 - 20
10285 1P 10AX 2-way switch 20 19 1 - 10 - 14 - 20
10306 Red indicator unit 50 33
10314 Cable outlet with cord-grip 50 15 1
10319 Blank module 50 15 1
* 10336 Dimmer 230V 60-900W/60-300VA 20 35 * 10337 Dimmer 120V 30-500W/30-300VA 20 35 19
10349 230V 50Hz bell 50 33 3
10363 230V 50-60Hz buzzer 50 33 3
10370 1P 16A 250V fuse carrier 50 33
10472 230V time-delay switch 10 35
*Only for Countries not members of the EU
7/24/2019 B_C10038.23757
46/4844
Article Description Packquantity
Page Marks(See the marks table
page 42)
Notes
10490 12V incandescent signalling unit white 50 37
10491 24V incandescent signalling unit white 50 37
10492 110V neon signalling unit red 50 37
10493 250V neon signalling unit red 50 3710493.AZ 250V fluorescent signalling unit blue 50 3710493.V 250V fluorescent signalling unit green 50 3710531 Frame 3M +screws 50 38 1
10635 Plate 1M aluminium gold 20 38 1
10636 Plate 2M aluminium gold 20 38 1
10637 Plate 3M aluminium gold 20 38 1
10660 Blanking plate aluminium gold 20 38 1
10705 Self-bearing plate 1M for 60mm box 20 38 1
10706 Self-bearing plate 2M for 60mm box 20 38 1
10714 2P+E 16A P30 outlet for 60mm box 10 23 1 - 10
10719 2P+E 16A universal outlet for 60mm box 10 23 19
10735 Self-bearing plate 1M box 3M 20 38 1
10735.U Self-bearing plate 1M USA type 20 38 1
10736 Self-bearing plate 2M box 3M 20 38 1
10737 Self-bearing plate 3M box 3M 20 38 1
10738 Self-bearing plate 4M box 4M 10 39 1
10739 Self-bearing plate 5M box 5M 10 39 1
10740 Self-bearing plate 6M box 6M 10 39 110764 2P+E 16A P30 outlet box 3M 10 23 1 - 10
10765 2P+E 16A P30 outlet+1M box 3M 10 23 1 - 10
10768 2P+E 16A universal outlet for box 3M 10 23 19
10773 10A 12-24V name-plate push box 3M 10 19
12201 IP55 enclosure for Linea 1M 10 41 1
12202 IP55 enclosure for Linea 2M 10 41 1
12330 IP55 2P+E 16A German SICURY outlet 10 4112331 IP55 2P+E 16A P30 outlet 10 41 1
12335 IP55 2P+E 16A universal outlet 10 4112352 IP55 1P NO 12-24V name-plate push button 10 4116330 Terminal resistor - 75ohm 50 31
Index
Index
7/24/2019 B_C10038.23757
47/48
Terms and conditions of sale
1. The contractual relationship resulting from the acceptance of each
individual order is regulated by the rules described in these general
terms of sale.
The purchaser waives any other general purchasing conditions,
unless otherwise specifically accepted in writing by VIMAR.
2. The purchase order is irrevocable and binding for the purchaser,and shall be considered accepted when the purchaser receives
formal confirmation thereof from VIMAR.
Once confirmed, the purchase order may not be cancelled without
the previous written consent of VIMAR. In this event, VIMAR shall
have the right to a suitable indemnity for the expenses and costs
sustained in beginning to fulfil the order.
3. The prices indicated in the sale catalogues/price lists are purely
indicative, and may change during the validity period of the some
catalogues/price lists due to increased production costs. Once
confirmed according to the procedures set forth in art. 2, the
sale prices indicated in the order shall become binding, except
in the event of unforeseen increases in production costs beyond
VIMAR's control. In this event VIMAR shall inform the purchaser of
the price increase, indicating the cause thereof.
4. Delivery terms are purely indicative unless specifically agreed
otherwise. Should the manufacturer be unable to fulfil the order
due to circumstances of force majeure, irregular supply of raw
materials or other unforeseeable circumstances, the terms of
delivery shall be considered extended, and the new terms will be
established by mutual agreement between the parties.
5. Risk is transferred to the purchaser when the products are deliv-
ered to the personnel indicated by the latter. The purchaser shall
indicate the selected means of shipment while ordering. Should no
shipping means be indicated, the VIMAR shall choose the means
of shipment for the products, with no right to claim.
VIMAR is exempt from any liability, with particular regard to theft,
breakdowns, or tampering that may occur during the shipment.
The packing costs for the products shall be met by the purchaser
and invoiced at cost.
6. The purchaser undertakes to verify the quantity and state of the
packages shipped in confrontation with the carrier or forwarding
agent.
Any complaints regarding quantity discrepancies or damaged
packages must be notified within 8 days from the receipt of the
merchandise. No products may be returned unless previously
agreed upon with VIMAR. In the case of authorized returns, the
products returned via free port and packing free of charge, shall
be credited at the purchase price minus 10% for inspection and
repackaging costs.
7. The product guarantee issued to the end user shall be deemed
to be a contractual guarantee pursuant to s. 1519(7) of the Civil
Code, with the result that the consumers rights expressly laid
down by legislation on the sale of consumer goods is not preju-diced in any way. As the consequent the consumer may always
enforce such rights against the vendor, on the terms and condi-
tions laid down in the said legislation and in this contractual guar-
antee.
The products are guaranteed for the period of three yearsfrom
the date of purchase. In any event, in order to enforce the guaran-
tee, the purchaser must report the non-conformity in writing to the
vendor within two months of the date of its discovery. Whether the
purchaser fail to do it by the expiry its rights will lapse.
In the event of non-conformity of the products sold, the consumer
may request their repair or replacement. As specified in s. 1519(4)
of the Civil Code, if the remedy requested is objectively impossible
or excessively onerous, involving considerable, unreasonable costs
for the vendor, VIMAR will restore the conformity of the product by
activating the alternative remedy. In any event, in accordance withthe last paragraph of s. 1519(4) of the Civil Code, a slight non-
conformity for which it would be objectively impossible or
excessively onerous for VIMAR to provide the remedies specified
above shall not entitle the consumer to terminate the contract of
sale. VIMAR guarantees to repair or replace non-confirming goods
free of charge. The consumer has the responsibility for demonstrat-
ing that this guarantee is still valid by producing a delivery docu-
ment issued by the vendor or other documentary evidence (fiscalreceipt, till receipt or the like, product code, orders, contract, etc.)
which shows the vendors name and the date of the sale. The
guarantee shall not operate in the event of improper use of the
goods, and in particular in the event of use thereof for commercial,
business or professional. In any at these cases the terms of ss.
1490 et seq. of the Civil Code remain applicable. Equally, non-
conformities due to negligent or careless use (e.g. failure to comply
with the instructions for operation of the equipment), installation
or maintenance performed by unauthorised personnel, damages
caused during transport or by circumstances unrelated to manu-
facturing defects and/or non-conformity of the product are not
covered by the guarantee. VIMAR declines all liability for any dam-
age or injury which may be caused directly or indirectly to persons,
property and domestic animals as a result of failure to comply with
the directions given in the instruction book, in particular those relat-ing to installation, use and maintenance of the product.
8. The products must be installed and/or used in compliance with
their technical specifications and the instructions provided by
VIMAR; they must also be installed and/or used in observance of
safety regulations and requirements governing the installation and/
or use of electrical material in force in the country where the prod-
ucts are installed and/or used.
For this purpose the purchaser expressly relieves VIMAR of
any liability in regard to improper use, failure to observe safety
standards, technical specifications and operating instructions.
Products that do not comply with the standards and/or technical
specifications in force within the European Union shall be supplied
only to those purchasers who specify in the order that the destination
country is not a member of the European Union, and who state
that all necessary investigations have been carried out as to the
compatibility of safety standards in force in the non-EU country for
which they are intended.
9. Payments must be made to the registered offices of VIMAR.
Failure to pay invoices, in full or in part, beyond the established
due date shall immediately lead to the application of interests at
the legal rate, in addition to any bank charges and commissions.
Failure to pay for any reason shall authorize VIMAR to suspend
additional shipments of material.
10.As per the terms of art. 10 of the law 675/96, the purchaser is
hereby informed that all personal information shall be entered into
the VIMAR database. That is necessary to uphold the contractual
relationship correctly in and compliance with certain legal
requirements, as well as for statistical, commercial, marketing,
promotional purposes, credit protection, management and transferthereof.
The purchasers personal information is processed by automated
means and by authorized persons, with the use of security
measures aimed at ensuring confidentiality.
VIMAR S.p.A. is the owner of processed data, whom the purchas-
er may contact to exercise his rights as set forth in article 13 of the
law cited above.
To this end the purchaser is hereby informed that he may access
his own personal information at any time, and request that it be
updated, corrected, or deleted and/or refuse to allow processing
thereof.
11. The rights and obligations of the parties are regulated by the Italian
law. The Court of Bassano del Grappa has non-exclusive jurisdic-
tion over any controversy that may arise in relation to the sale of
the products. The purchaser accepts irrevocably the jurisdiction of
the Court of Bassano del Grappa should VIMAR file suit with this
court.
LINEA
7/24/2019 B_C10038.23757
48/48