Upload
andie
View
47
Download
0
Tags:
Embed Size (px)
DESCRIPTION
A Comparison of Numerical Methods and Analytical Methods in Determination of Tunnel Walls Displacement. Behdeen Oraee-Mirzamani Imperial College London, UK Saeed Zandi Azad University, Iran Professor Kazem Oraee University of Stirling, UK. 32 th International Conference on - PowerPoint PPT Presentation
Citation preview
1
A Comparison of Numerical Methods and Analytical Methods in Determination of
Tunnel Walls DisplacementBehdeen Oraee-Mirzamani
Imperial College London, UK
Saeed ZandiAzad University, Iran
Professor Kazem OraeeUniversity of Stirling, UK
32th International Conference on Ground Control in Mining
Morgantown, WV
2
Structure of presentation
Background and introduction
Tunnels in underground mining
Case study
Analytical methods
Numerical methods
Summary
Conclusion
3
Tunnel
A tunnel is an underground passageway, used for access, ventilation etc, completely enclosed except commonly at both ends.
Tunnels are dug in different types of materials varying from soft clay to hard rock.
A tunnel may be used for foot, rail or vehicular road traffic.
4
Tunnel and Underground Mining
Tunnel
Room and Pillar
Sublevel Caving
Block Caving
LongwallSublevel Stoping
Shrinkage
Cut and Fill
5
Tunnels in Underground MiningTunnels are important parts in underground mines
and have a significant role in ore production and
transportation. In some methods such as room and
pillar mining, they represent an integral part of the
mining process.
Tunnels’ stability can affect production and
productivity in underground coal mines.
Tunnels’ instability or collapse can also cause safety
hazards and economic damages since it can disrupt or
stop production and ore transportation.
6
Therefore
Suitable and correct design and implementation of support systems is necessary in order to prevent collapse in tunnels.
In order to design a suitable support system for a tunnel, it is necessary to know the different types of stresses around the tunnel.
Analysis of tunnels’ roof and walls stability and determination of displacement in these regions, can help to design optimum support system.
7
Case study: Parvade Underground Coal MineThe Parvade coal field lies approximately 85km south of the
city of Tabas in Iran.The total probable anthracite reserve in the region is
approximately 1.2 billion tons.
The minable reserve suitable for underground production is 28 million tons in mine 1.
In this study, displacement fields in the roof and walls of the tunnels have been studied.
The tunnel’s dimensions are 4m by 4m.
8
Analysis Methods
There are various methods for analysis of tunnel stability and
determination of tunnels’ walls displacement. Two of the main
methods are:
Analytical Methods
Numerical Methods
These methods have been used widely in order to analyze the
stability of tunnels during the design process of underground
mines.
9
Numerical Method
For numerical modeling, Phase 2 software is used
Phase 2 is based on Finite Element Method (FEM)
It is a 2-dimensional program that calculates stresses and displacements around underground openings.
It can be used in a wide range of mining and civil engineering problems.
10
The Input Parameters Used in Numerical Modeling
11
Created Model in Phase 2
According to in-situ stresses and material properties, this finite element model was created.
12
Extracted Results from Phase 2Horizontal Displacement Deformation Vectors
13
Horizontal Displacement
According to the extracted results from Phase 2, the maximum tunnel walls displacement is 20mm.
14
Analytical Method
For the analytical modeling, the Duncan Fama Method is used.
This analytical method requires parameters such as: Modulus of elasticity (MPa), Poisson’s ratio, Internal angle of friction and Rock mass compressive strength.
This method has been used for drawing the Ground Reaction Curve in order to determine the tunnel walls displacement.
15
Ground Reaction Curve
The Ground Reaction Curve can be defined as a curve that describes the decreasing of the inner pressure and the increasing of radial displacement of the tunnel’s wall.
As evident from the Ground Reaction Curve obtained using the Duncan Fama method, the maximum tunnel walls displacement is 164mm.
16
Ground Reaction Curve
17
SummaryThe displacement of tunnel walls was calculated using
both numerical and analytical methods.
The maximum displacement of tunnel walls calculated using the numerical method was 20mm.
The maximum displacement of tunnel walls calculated using the analytical method was 164mm.
The comparison of these methods show a noteworthy difference in the tunnel walls displacement.
18
Summary
The reason for this difference is due to the difference in the assumptions and limitations within the two methods.
After this comparison, based on these results and mining conditions, the suitable method for stability analysis of tunnels can be chosen.
19
ConclusionsAnalytical solutions often have limited application because they
must be used within the range of assumptions.
These assumption usually include: Elastic behavior Isotropic and homogeneous materialTime independent behaviorQuasi-static loadingThe ratio of horizontal stress to vertical stress being constant
20
Conclusions One of the other limiting assumptions in analytical
methods is the need for the cross section of the tunnel to be circular.
Rocks may not be isotropic or homogeneous and the loading may not be static. Additionally the geometry of the problem may be complex.
In these cases, solutions can only be obtained numerically.
21
Conclusions
Numerical methods can be widely used to perform stability analysis in all underground excavations with different shapes and dimensions.
Comparing analytical and numerical methods, it seems that numerical methods (Phase 2) are more suitable for stability analysis of tunnels in underground coal mines.
22
Thank you for your attention