beka

led

lume-mini

ElEctrical

Switching/dimming control

Incorporated Nema socket assembly

Pre-programmable stand-alone dimming

OWLET remote management

Solar version Refer to BEKA SOLAR brochure

Surge protection 20kA

correlated colour temperature Warm white (3000K)

MEchanical

Mounting Levelling spigot adaptor

Ø42mm spigots

Ø60mm spigots

Ø60mm bottom entry pole

Ø76mm bottom entry pole

ProtectorGlass (IK 08)

Polycarbonate (IK 10)

colourPearl Light Grey (RAL 9022)

Other RAL colours available on request

PhOtOMEtricS

Optics

5068 5102 5118 5138

5091 5103 5119 5139

5094 5112 5136 5140

5098 5117 5137 5141

OPTIONS AND ACCESSORIES

Designed and manufactured by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles06/15

BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 0180info@beka-schreder.co.za | www.beka-schreder.co.za

ORDERING DATA

DEScriPtiOn lEDS cUrrEnt (ma) lUMEn MaSS (KG)

BEKA LEDlume-mini 26W 8 1 000 2 664 5.05

BEKA LEDlume-mini 18W 16 350 2 360 5.05

BEKA LEDlume-mini 26W 16 500 3 240 5.05

BEKA LEDlume-mini 36W 16 700 4 128 5.05

BEKA LEDlume-mini 53W 16 1000 5 328 5.05

Standard optic: 5068 – urban road Standard finish: Unpainted aluminium

CHARACTERISTICS – LUMINAIREOptical compartment tightness level: IP 66 (*)

Control gear tightness level: IP 66 (*)

Impact resistance (glass): IK 07 (**)

Nominal voltage: 108-305V - 50Hz

Electrical class: I or II (**)

Weight (total): 5.05kg

Correlated colour temperature (CCT): Neutral white light

(4000K, CRI ≥70)

Materials: Body: Marine grade aluminium

(EN 1706 AC-44300)

Protector: High-impact clear

glass or polycarbonate

Installation height: 4-8m

Aerodynamic resistance (CxS): 0.026m2

Standard finish: Unpainted aluminium

(*) according to SANS 60598

(**) according to SANS 62262

APPLICATIONS• Designed for lighting of Group A4 and Group B roads

• Perimeter lighting

• Suitable for solar-powered applications in the 12V/24V

version

• Outdoor lighting in eco-friendly applications

KEY ADVANTAGES• Designed and manufactured in South Africa

• Designed to operate LED light sources of up to 53W in an

ambient temperature environment of up to 35˚C, without

reducing the useful lifetime of 60 000 hours, at a lumen

depreciation of not more than 20% (L80)

• Slim, aesthetical design optimised for LED characteristics

• Provides energy savings of up to 70%

• Easy to install

• No lamp or component replacements for more than 10 years

• Designed for easy technology upgrade (FutureProof)

• Unsurpassed light uniformity

PHOTOMETRY

OVERVIEW Lifetime residual flux @ tq 25˚C (**)

Number of LEDs Neutral white (4000K) 8 LEDs 16 LEDs @60.000h @100.000h

Current: 350mA Nominal flux (lm)* – 2360

90% 70%

Power consumption (W) – 18

Current: 500mANominal flux (lm)* – 3240

Power consumption (W) – 26

Current: 700mANominal flux (lm)* – 4128

Power consumption (W) – 36

Current: 1000mANominal flux (lm)* 2664 5 328

Power consumption (W) 26 53

(*) The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental

conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology(**) In accordance with LM-80 – TM-21

Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base

SA Pat. 2012/07685

APPLICATIONSThe BEKA LEDlume-mini luminaire was specifically developed for the functional lighting of Group A4 and B roads, where

energy saving, low maintenance and precise light control considerations are important factors. The flexibility of the

LensoFlex® photometric engine allows for multiple light distributions to ensure that the specific requirements of each

application are met. Furthermore, the options for varying the number of LEDs allows for a precise adaptation of the

nominal power of the luminaire according to the area that is to be lit.

ø42

450

235

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

180°

90°

0°

270°

180°

90°

0°

270°

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

180°

90°

0°

270°

Paths and bike paths Residential streets Shared zones, commercial streets in urban areas

88 Aerodynamic resistance: 0.026m2

BEKA LEDlume

-mini • Designed to replace conventional HID and CFL streetlight

luminaires

• Marine grade, high-pressure die-cast aluminium housing

• No ingress of dust and moisture into the LED and controller

compartment - IP 66

• Integrated vent for rapid pressure equalisation and reduction of

condensation

• Three-compartment housing, ensures reliable ingress protection

• Automatic disconnection of power when opened

• Surge protection 10kV/10kA

CONSTRUCTION DETAILSThe luminaire consists of an LED engine, power supply and spigot

compartment. This allows the easy installation of the LED engine

by means of a hinging action onto a spigot base casting, with

incorporated leveling device. It is secured by stainless steel

latches and an access screw. The LED engine, consisting of the

LED light source and the power supply, can be easily replaced or

upgraded (FutureProof ).

Both compartments are rated IP 66.

Electronic temperature monitoring prevents overheating of LEDs

and power supply, positioned directly next to LEDs (ThermiX®).

The power supply is automatically disengaged when opening the

luminaire. The luminaire housing is manufactured of marine grade

aluminium. It is designed for LED light sources between 18W and

53W.

OPTIONS• Incorporated Nema socket assembly

• Adjustment knuckles enable correct alignments on existing

side- or bottom entry spigots

• Surge protection up to 20kV/20kA

• Pre-programmable stand-alone dimming

• Vandal resistant, polycarbonate protector (IK 10)

• Glass (IK 08)

• Owlet nightshift Telemanagement module

DIMENSIONS IN MM

CHARACTERISTICS – LUMINAIREOptical compartment tightness level: IP 66 (*)

Control gear tightness level: IP 66 (*)

Impact resistance (glass): IK 07 (**)

Nominal voltage: 108-305V - 50Hz

Electrical class: I or II (**)

Weight (total): 5.05kg

Correlated colour temperature (CCT): Neutral white light

(4000K, CRI ≥70)

Materials: Body: Marine grade aluminium

(EN 1706 AC-44300)

Protector: High-impact clear

glass or polycarbonate

Installation height: 4-8m

Aerodynamic resistance (CxS): 0.026m2

Standard finish: Unpainted aluminium

(*) according to SANS 60598

(**) according to SANS 62262

APPLICATIONS• Designed for lighting of Group A4 and Group B roads

• Perimeter lighting

• Suitable for solar-powered applications in the 12V/24V

version

• Outdoor lighting in eco-friendly applications

KEY ADVANTAGES• Designed and manufactured in South Africa

• Designed to operate LED light sources of up to 53W in an

ambient temperature environment of up to 35˚C, without

reducing the useful lifetime of 60 000 hours, at a lumen

depreciation of not more than 20% (L80)

• Slim, aesthetical design optimised for LED characteristics

• Provides energy savings of up to 70%

• Easy to install

• No lamp or component replacements for more than 10 years

• Designed for easy technology upgrade (FutureProof)

• Unsurpassed light uniformity

PHOTOMETRY

OVERVIEW Lifetime residual flux @ tq 25˚C (**)

Number of LEDs Neutral white (4000K) 8 LEDs 16 LEDs @60.000h @100.000h

Current: 350mA Nominal flux (lm)* – 2360

90% 70%

Power consumption (W) – 18

Current: 500mANominal flux (lm)* – 3240

Power consumption (W) – 26

Current: 700mANominal flux (lm)* – 4128

Power consumption (W) – 36

Current: 1000mANominal flux (lm)* 2664 5 328

Power consumption (W) 26 53

(*) The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental

conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology(**) In accordance with LM-80 – TM-21

Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base

SA Pat. 2012/07685

APPLICATIONSThe BEKA LEDlume-mini luminaire was specifically developed for the functional lighting of Group A4 and B roads, where

energy saving, low maintenance and precise light control considerations are important factors. The flexibility of the

LensoFlex® photometric engine allows for multiple light distributions to ensure that the specific requirements of each

application are met. Furthermore, the options for varying the number of LEDs allows for a precise adaptation of the

nominal power of the luminaire according to the area that is to be lit.

ø42

450

235

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

180°

90°

0°

270°

180°

90°

0°

270°

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

50˚

60˚

80˚

90˚

40˚

10˚ 0˚0˚/180˚ 90˚/270˚

cd/klm200 100300400500

70˚

30˚20˚

180°

90°

0°

270°

Paths and bike paths Residential streets Shared zones, commercial streets in urban areas

88 Aerodynamic resistance: 0.026m2

BEKA LEDlume

-mini • Designed to replace conventional HID and CFL streetlight

luminaires

• Marine grade, high-pressure die-cast aluminium housing

• No ingress of dust and moisture into the LED and controller

compartment - IP 66

• Integrated vent for rapid pressure equalisation and reduction of

condensation

• Three-compartment housing, ensures reliable ingress protection

• Automatic disconnection of power when opened

• Surge protection 10kV/10kA

CONSTRUCTION DETAILSThe luminaire consists of an LED engine, power supply and spigot

compartment. This allows the easy installation of the LED engine

by means of a hinging action onto a spigot base casting, with

incorporated leveling device. It is secured by stainless steel

latches and an access screw. The LED engine, consisting of the

LED light source and the power supply, can be easily replaced or

upgraded (FutureProof ).

Both compartments are rated IP 66.

Electronic temperature monitoring prevents overheating of LEDs

and power supply, positioned directly next to LEDs (ThermiX®).

The power supply is automatically disengaged when opening the

luminaire. The luminaire housing is manufactured of marine grade

aluminium. It is designed for LED light sources between 18W and

53W.

OPTIONS• Incorporated Nema socket assembly

• Adjustment knuckles enable correct alignments on existing

side- or bottom entry spigots

• Surge protection up to 20kV/20kA

• Pre-programmable stand-alone dimming

• Vandal resistant, polycarbonate protector (IK 10)

• Glass (IK 08)

• Owlet nightshift Telemanagement module

DIMENSIONS IN MM

beka

led

lume-mini

ElEctrical

Switching/dimming control

Incorporated Nema socket assembly

Pre-programmable stand-alone dimming

OWLET remote management

Solar version Refer to BEKA SOLAR brochure

Surge protection 20kA

correlated colour temperature Warm white (3000K)

MEchanical

Mounting Levelling spigot adaptor

Ø42mm spigots

Ø60mm spigots

Ø60mm bottom entry pole

Ø76mm bottom entry pole

ProtectorGlass (IK 08)

Polycarbonate (IK 10)

colourPearl Light Grey (RAL 9022)

Other RAL colours available on request

PhOtOMEtricS

Optics

5068 5102 5118 5138

5091 5103 5119 5139

5094 5112 5136 5140

5098 5117 5137 5141

OPTIONS AND ACCESSORIES

Designed and manufactured by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles06/15

BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 0180info@beka-schreder.co.za | www.beka-schreder.co.za

ORDERING DATA

DEScriPtiOn lEDS cUrrEnt (ma) lUMEn MaSS (KG)

BEKA LEDlume-mini 26W 8 1 000 2 664 5.05

BEKA LEDlume-mini 18W 16 350 2 360 5.05

BEKA LEDlume-mini 26W 16 500 3 240 5.05

BEKA LEDlume-mini 36W 16 700 4 128 5.05

BEKA LEDlume-mini 53W 16 1000 5 328 5.05

Standard optic: 5068 – urban road Standard finish: Unpainted aluminium