8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

1/8

Belajar mengkonfigurasi basic OSPFv3 diJuniper(11 juni 2010)

http://iwing.wordpress.comhttp://www.ittelkom.ac.id/pinguin

Percobaan ini menggunakan logical router, topology yang digunakan adalah sebagai berikut:

Langkah-langkahnya adalah sebagai berikut:

----------------------------------------------------------------------------------------Configure R1----------------------------------------------------------------------------------------[edit logical-routers R1]root@iwing#set interfaces lo0.1 family inet address 1.1.1.1

root@iwing#set interfaces fxp1.1 family inet6 address 10::10:1/64root@iwing#set interfaces fxp2.2 family inet6 address 13::13:1/64root@iwing#set protocols ospf3 area 0 interface lo0.1 pasiveroot@iwing#set protocols ospf3 area 0 interface fxp1.1root@iwing#set protocols ospf3 area 0 interface fxp2.2

----------------------------------------------------------------------------------------Configure R2----------------------------------------------------------------------------------------[edit logical-routers R2]

root@iwing#set interfaces lo0.2 family inet address 2.2.2.2root@iwing#set interfaces fxp2.1 family inet6 address 10::10:2/64root@iwing#set interfaces fxp3.2 family inet6 address 11::11:1/64root@iwing#set protocols ospf3 area 0 interface lo0.2 pasiveroot@iwing#set protocols ospf3 area 0 interface fxp2.1root@iwing#set protocols ospf3 area 0 interface fxp3.2

----------------------------------------------------------------------------------------Configure R3

----------------------------------------------------------------------------------------[edit logical-routers R3]

root@iwing#set interfaces lo0.3 family inet address 3.3.3.3root@iwing#set interfaces fxp4.1 family inet6 address 11::11:2/64root@iwing#set interfaces fxp2.3 family inet6 address 12::12:1/64root@iwing#set protocols ospf3 area 0 interface lo0.3 pasiveroot@iwing#set protocols ospf3 area 0 interface fxp4.1root@iwing#set protocols ospf3 area 0 interface fxp2.3

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

2/8

----------------------------------------------------------------------------------------Configure R4----------------------------------------------------------------------------------------[edit logical-routers R4]

root@iwing#set interfaces lo0.4 family inet address 4.4.4.4root@iwing#set interfaces fxp1.2 family inet6 address 13::13:2/64root@iwing#set protocols ospf3 area 0 interface lo0.4 pasive

root@iwing#set protocols ospf3 area 0 interface fxp1.2----------------------------------------------------------------------------------------Configure R5----------------------------------------------------------------------------------------[edit logical-routers R5]

root@iwing#set interfaces lo0.5 family inet address 5.5.5.5root@iwing#set interfaces fxp1.3 family inet6 address 12::12:2/64root@iwing#set protocols ospf3 area 0 interface lo0.5 pasiveroot@iwing#set protocols ospf3 area 0 interface fxp1.3

----------------------------------------------------------------------------------------how to check 1 (run show ospf3 neighbor[logical-router..])----------------------------------------------------------------------------------------[edit]root@iwing# run show ospf3 neighbor logical-router R4ID Interface State Pri Dead1.1.1.1 fxp1.2 Full 128 30Neighbor-address fe80::2aa:0:1e00:104

[edit]root@iwing# run show ospf3 neighbor logical-router R1ID Interface State Pri Dead2.2.2.2 fxp1.1 Full 128 31Neighbor-address fe80::2aa:0:a00:104

4.4.4.4 fxp2.2 Full 128 32Neighbor-address fe80::2aa:0:1e00:103

[edit]root@iwing# run show ospf3 neighbor logical-router R2ID Interface State Pri Dead1.1.1.1 fxp2.1 Full 128 32Neighbor-address fe80::2aa:0:a00:103

3.3.3.3 fxp3.2 Full 128 30Neighbor-address fe80::2aa:0:1400:106

[edit]

root@iwing# run show ospf3 neighbor logical-router R3ID Interface State Pri Dead5.5.5.5 fxp2.3 Full 128 36Neighbor-address fe80::2aa:0:2800:103

2.2.2.2 fxp4.1 Full 128 39Neighbor-address fe80::2aa:0:1400:105

[edit]root@iwing# run show ospf3 neighbor logical-router R5ID Interface State Pri Dead3.3.3.3 fxp1.3 Full 128 33Neighbor-address fe80::2aa:0:2800:104

----------------------------------------------------------------------------------------how to check 2 (run show route protocol ospf [logical-router..])----------------------------------------------------------------------------------------[edit]

root@iwing# run show route protocol ospf logical-router R4

inet.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

inet6.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both

10::/64 *[OSPF/10] 00:17:12, metric 2> to fe80::2aa:0:1e00:104 via fxp1.2

11::/64 *[OSPF/10] 00:17:12, metric 3> to fe80::2aa:0:1e00:104 via fxp1.2

12::/64 *[OSPF/10] 00:17:12, metric 4> to fe80::2aa:0:1e00:104 via fxp1.2

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

3/8

ff02::5/128 *[OSPF/10] 00:17:22, metric 1MultiRecv

[edit]root@iwing# run show route protocol ospf logical-router R1

inet.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

inet6.0: 10 destinations, 11 routes (10 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both

11::/64 *[OSPF/10] 00:38:10, metric 2> to fe80::2aa:0:a00:104 via fxp1.1

12::/64 *[OSPF/10] 00:23:44, metric 3> to fe80::2aa:0:a00:104 via fxp1.1

ff02::5/128 *[OSPF/10] 01:10:20, metric 1MultiRecv

[edit]root@iwing# run show route protocol ospf logical-router R2

inet.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

inet6.0: 10 destinations, 11 routes (10 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both

12::/64 *[OSPF/10] 00:23:47, metric 2> to fe80::2aa:0:1400:106 via fxp3.2

13::/64 *[OSPF/10] 00:19:14, metric 2> to fe80::2aa:0:a00:103 via fxp2.1

ff02::5/128 *[OSPF/10] 01:10:56, metric 1MultiRecv

[edit]root@iwing# run show route protocol ospf logical-router R3

inet.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

inet6.0: 10 destinations, 11 routes (10 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both

10::/64 *[OSPF/10] 00:37:10, metric 2> to fe80::2aa:0:1400:105 via fxp4.1

13::/64 *[OSPF/10] 00:19:16, metric 3> to fe80::2aa:0:1400:105 via fxp4.1

ff02::5/128 *[OSPF/10] 01:09:50, metric 1MultiRecv

[edit]root@iwing# run show route protocol ospf logical-router R5

inet.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)

inet6.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both

10::/64 *[OSPF/10] 00:21:42, metric 3> to fe80::2aa:0:2800:104 via fxp1.3

11::/64 *[OSPF/10] 00:21:42, metric 2> to fe80::2aa:0:2800:104 via fxp1.3

13::/64 *[OSPF/10] 00:19:23, metric 4> to fe80::2aa:0:2800:104 via fxp1.3

ff02::5/128 *[OSPF/10] 00:21:52, metric 1MultiRecv

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

4/8

----------------------------------------------------------------------------------------how to check 3 (run ping and treceroute [logical-router..])----------------------------------------------------------------------------------------[edit]

root@iwing# run ping 12::12:2 logical-router R4 count 4PING6(56=40+8+8 bytes) 13::13:2 --> 12::12:216 bytes from 12::12:2, icmp_seq=0 hlim=61 time=1.740 ms

16 bytes from 12::12:2, icmp_seq=1 hlim=61 time=1.293 ms16 bytes from 12::12:2, icmp_seq=2 hlim=61 time=1.540 ms16 bytes from 12::12:2, icmp_seq=3 hlim=61 time=1.726 ms

--- 12::12:2 ping6 statistics ---4 packets transmitted, 4 packets received, 0% packet lossround-trip min/avg/max/std-dev = 1.293/1.575/1.740/0.181 ms

[edit]root@iwing# run traceroute 12::12:2 logical-router R4traceroute6 to 12::12:2 (12::12:2) from 13::13:2, 30 hops max, 12 byte packets1 13::13:1 (13::13:1) 0.975 ms 1.255 ms 0.937 ms2 10::10:2 (10::10:2) 1.661 ms 1.008 ms 0.827 ms3 11::11:2 (11::11:2) 1.460 ms 1.701 ms 1.195 ms4 12::12:2 (12::12:2) 1.385 ms 1.130 ms 1.464 ms

[edit]

root@iwing# run ping 13::13:2 logical-router R5 count 4PING6(56=40+8+8 bytes) 12::12:2 --> 13::13:216 bytes from 13::13:2, icmp_seq=0 hlim=61 time=1.619 ms16 bytes from 13::13:2, icmp_seq=1 hlim=61 time=1.319 ms16 bytes from 13::13:2, icmp_seq=2 hlim=61 time=1.853 ms16 bytes from 13::13:2, icmp_seq=3 hlim=61 time=1.300 ms

--- 13::13:2 ping6 statistics ---4 packets transmitted, 4 packets received, 0% packet lossround-trip min/avg/max/std-dev = 1.300/1.523/1.853/0.229 ms

[edit]root@iwing# run traceroute 13::13:2 logical-router R5traceroute6 to 13::13:2 (13::13:2) from 12::12:2, 30 hops max, 12 byte packets1 12::12:1 (12::12:1) 1.358 ms 0.876 ms 0.803 ms2 11::11:1 (11::11:1) 1.461 ms 1.069 ms 0.881 ms3 10::10:1 (10::10:1) 1.256 ms 1.112 ms 1.796 ms

4 13::13:2 (13::13:2) 1.454 ms 1.244 ms 1.383 ms

----------------------------------------------------------------------------------------konfigurasi lengkapnya @_@----------------------------------------------------------------------------------------

root@iwing# show## Last changed: 2010-06-10 09:49:52 UTCversion 8.3R2.8;system {

host-name iwing;root-authentication {

encrypted-password "$1$bd4ySf8Q$EaiiIc24ycXAWCQHKOJCf0"; ## SECRET-DATA}services {

ftp;

telnet;}syslog {

user * {any emergency;

}file messages {

any notice;authorization info;

}file interactive-commands {

interactive-commands any;

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

5/8

}}

}logical-routers {

R1 {interfaces {

fxp1 {unit 1 {

vlan-id 10;family inet6 {address 10::10:1/64;

}}

}fxp2 {

unit 2 {vlan-id 30;family inet6 {

address 13::13:1/64;}

}}fxp3 {

unit 4 {vlan-id 50;

}}lo0 {

unit 1 {family inet {

address 1.1.1.1/32;}

}}

}protocols {

ospf3 {area 0.0.0.0 {

interface fxp1.1;interface lo0.1 {

passive;}

interface fxp2.2;}

}}

}R2 {

interfaces {fxp1 {

unit 5 {vlan-id 60;

}}fxp2 {

unit 1 {vlan-id 10;family inet6 {

address 10::10:2/64;

}}

}fxp3 {

unit 2 {vlan-id 20;family inet6 {

address 11::11:1/64;}

}}lo0 {

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

6/8

unit 2 {family inet {

address 2.2.2.2/32;}

}}

}protocols {

ospf3 {area 0.0.0.0 {interface fxp3.2;interface fxp2.1;interface lo0.2 {

passive;}

}}

}}R3 {

interfaces {fxp2 {

unit 3 {vlan-id 40;family inet6 {

address 12::12:1/64;}}

}fxp4 {

unit 1 {vlan-id 20;family inet6 {

address 11::11:2/64;}

}}lo0 {

unit 3 {family inet {

address 3.3.3.3/32;}

}}

}protocols {

ospf3 {area 0.0.0.0 {

interface fxp4.1;interface lo0.3 {

passive;}interface fxp2.3;

}}

}}R4 {

interfaces {

fxp1 {unit 2 {

vlan-id 30;family inet6 {

address 13::13:2/64;}

}}lo0 {

unit 4 {family inet {

address 4.4.4.4/32;

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

7/8

}}

}}protocols {

ospf3 {area 0.0.0.0 {

interface fxp1.2;

interface lo0.4 {passive;}

}}

}}R5 {

interfaces {fxp1 {

unit 3 {vlan-id 40;family inet6 {

address 12::12:2/64;}

}}

lo0 {unit 5 {family inet {

address 5.5.5.5/32;}

}}

}protocols {

ospf3 {area 0.0.0.0 {

interface fxp1.3;interface lo0.5 {

passive;}

}}

}}R6 {

interfaces {fxp5 {

unit 1 {vlan-id 50;

}}lo0 {

unit 6;}

}}

}interfaces {

fxp1 {

vlan-tagging;}fxp2 {

vlan-tagging;}fxp3 {

vlan-tagging;}fxp4 {

vlan-tagging;}fxp5 {

8/9/2019 Belajar Mengkonfigurasi Basic OSPFv3 DiJuniper

8/8

vlan-tagging;}fxp6 {

vlan-tagging;}

}

[edit]

root@iwing#----------------------------------------------------------------------------------------sekian dulu dan semoga bermanfaat...."salam sedogedoi"----------------------------------------------------------------------------------------