BER1530

DataTransmissionAnalyzer

UsersManual

V2.0

DADITelecom

ExceptionClauseThis information and all other documents in printed orelectronicformareonlyprovidedforreference.Althougheffortshavealreadybeenmadetoconfirmtheintegralityand accuracy of this information, the Liuzhou DadiTelecommunication Equipment Co., Ltd. Just offers thisinformation and all other documents As Is (theoriginal)withoutanyguarantee,andrefusestoprovideany guarantees within the range permitted as wide aspossible, including but not limited to those guaranteesconcerning the implicated marketability,noninfringement and the suitability to specificapplications In addition, the Liuzhou DadiTelecommunicationEquipmentCo.,Ltd.Willnottaketheresponsibility for any damages due to the use of suchinformation or other documents (including but notlimited to any direct, indirect, inevitable or accidentalones). Though some contents may supplement eachother, no contents included in such information or anyotherdocumentswillmakeanyguaranteesorstatementsof the LiuzhouDadi Telecommunication Equipment Co.,Ltd (or its suppliers or licensers), and any changes tothoseclausesapplicabletothe licenseagreementofthissoftwareaswell.

CopyrightThisproductisundertheprotectionofthecopyrightlaw.

Withouttheauthorization inwritingbytheLiuzhouDadi

Telecommunication Equipment Co., Ltd. In advance, no

one is allowed to copy, print, adapt, translate or

abbreviateallorpartofthisproductanddocumentsinto

any electronic or machinereadable forms, unless

otherwise expressly provided in this software license

agreement.

All rights reserved 2005 2012. Liuzhou Dadi

TelecommunicationEquipmentCo.,Ltd

DADIScience&TechnologyDistrict,Liuzhou

New & Hightech industrial Development

Zone,Liuzhou,Guangxi,China

Allrightsreserved.PrintedinChina.

Trademark

Dadi is the registered trademark of the Liuzhou DadiTelecommunication Equipment Co., Ltd. In China andother countries. Pentium and Intel are the registeredtrademarksof the IntelCorporation inU.S.A. andothercountries. Windows 2000 is the trademark of theMicrosoftCorporation inU.S.A.orothercountries.Logossuch as ActiveX, Microsoft, NetMeeting, PowerPoint,Windows,WindowsNTandWindowsare the registeredtrademarks of the Microsoft Corporation in U.S.A. orother countries. The names of other products andcompanies mentioned may be the trademarks orregisteredtrademarksoftheirowners.

SafetymattersIn thewhole testprocess,please complywith common.safetypreventnorms. Ifyouuse the testerwithout thisusermanual, and the tester is damaged,DADI Telecomwont undertake any responsibility. Please be sure toobey the followingsafetynorms, lestcausebodily injuryortesterdamage.

Warning

BatterychargingChargingthebatterymustusethechargerfromthemanufacturer.

Youcantuseanyunauthorizedcharger,lestcausetesterdamage

oraccident.

BatteryreplacementPleaseusethemanufacturerconfiguredLibatteries.Youcant

operatethetesterininflammableorexplosiveenvironment.Donot

usethetesterinenvironmentwithinflammableorexplosiveliquid

orsteam.Inthisenvironment,itwillbedangerouswithany

electricalinstruments.

OpenrearcoverUnlessyouwanttoreplacemodules,pleasedontopenrearcover

orbottomcover.Thereplacemustbeoperatedbyformaltrained

stuff.Thereishighvoltageinsomeareasinsidethetesterwhich

willcausedangerousifitismishandled.

LCDIftheLCDisdamagedandliquidoutflows,pleasedontinhaledit

intomouthorsplashonskin.Iftheliquidissplashedintoeyeor

mouth,pleaseimmediatelyrinsewithwaterandgotothehospital;

iftheliquidissplashedonskinorclothes,pleasewipewithalcohol

firstly,andthenwashwithsoapandwater.Inaddition,takecare,

dontbescratchedbyglassfragments,donttouchtheborderof

glassfragments.

CatalogueChapter1 General...............................................................1Chapter2 Inspection...........................................................3

2.1 UnpacktheInstrument..........................................32.2 AccessoryandOption............................................32.3 PowerSupply.........................................................3

Chapter3 TesterConfiguration............................................53.1 FrontView.............................................................5

3.1.1 LEDs..............................................................63.1.2 Buttons.........................................................6

3.2 TopPanel................................................................73.2.1 PowerAdapterPlug......................................73.2.2 E1UnbalancedPort......................................73.2.3 E1BalancedPort...........................................73.2.4 USBPort.......................................................7

3.3 BottomDatacomPort............................................83.4 OtherAccessories..................................................8

3.4.1 TouchPen.....................................................83.4.2 L9SelftestCable..........................................83.4.3 LoopbackTestPlug.......................................8

Chapter4 Operation............................................................94.1 MainOperationInterface......................................94.2 E1Test..................................................................10

4.2.1 E1TestConfiguration..................................11

4.2.2 TimingTest.................................................124.2.3 TestandStatistics.......................................134.2.4 ViewData...................................................154.2.5 DefectInject...............................................164.2.6 VFMeasurementandSPEAKSlot...............174.2.7 DelayandAPSMeasurement.....................18

4.3 Datacom(VSeriesPort)Test................................194.4 RecordsManagement..........................................204.5 SaveRecordstoPC...............................................214.6 SystemSettings....................................................214.7 SoftwareUpgrade................................................21

Chapter5 MalfunctionAnalysisandSolution...................23Chapter6 MainTechnicalParameters...............................25

6.1 E1BERtestparameter.........................................256.2 Datacomtestparameter......................................256.3 Others..................................................................26

Informationaboutservice......................................................26

BER1530 1

Chapter1 General

BER1530DataTransmissionAnalyzer is the latestcompacthandheld

tester. With large touch screen TFT color LCD, and builtin

rechargeableLiionbattery. ItcanbeforE1/2Monlinemonitoringas

wellasBER test from50b/s to2048kb/s,which is thenecessary tool

fornetworkequipmentinstallation,troubleshootingandmaintenance.

Functionz TX/RXoftheframeandunframedsignalz Supportthetermination,monitoringandbridgedz Bit,Code,FAS,CRCerrorinjectionanddetectionz Frame,Signaling,timeslotdataviewingz ITUTG.821/G.826/M2100erroranalysisz LoopbackdelayandSwitchingtimetest z Voice&FrequencyMeasurementz VSeriesPortTestz Testresulthistogramdisplayz Savethedetailsoferrorandalarmformorethan5000timesz TestrecordscanbetransferredtoPCbyUSBz Large capacity Liion battery guarantees more than 8 hours

workingwithoutexternalpowersupply.

2 BER1530

BER1530 3

Chapter2 Inspection

Its absolutely necessary for you to read inspections before unpack

packageandcheck the instrumentor test. In thischapter,wewould

liketohelpyouknowtheinitialworkstatusoftheinstrument.

2.1 UnpacktheInstrument

Beforeunpacking,please checkwhether there isanydamage in the

cartonandthebag.Ifany,pleasesortallofthearticlesperthepacking

list.

In case that damaged bag or incomplete articles happen or the

instrument cannot achieve function tests, please contact us

immediately.

2.2 AccessoryandOption

Accessories to the instrument, please refer to the packing list. If

receivedarticlesarenotthesamewithwhatisspecifiedinthepacking

list,pleaseinformusimmediatelysoasnottomakeanyinfluenceon

using.

2.3 PowerSupply

The instrument supports two power supplymodes,DC and battery,

withabuiltin large capacity rechargeable lithiumbattery for8hour

longconsecutiveoperationafterbeingfullycharged.

When using external power supply, the battery will charge

automaticallywiththebatterycapacityshownontherighttopcorner

4 BER1530

ofLCDoftheinstrumentatanymoment.

WhenusingACpower,pleaseusetheACchargeraccompanied,orthe

instrumentwillbedamaged.

Precautions:

Dontdisposewastedbatteryinwaterorfireforfearofbackfireorpollution.

!Dontmake the twopolesof thebattery inshortcircuit for fearof

dangers.

!Dontmakebatteryclose to firesourceoruse inhigh temperature

forfearofseverepersonalinjury.

BER1530 5

Chapter3 TesterConfiguration

3.1 FrontView

6 BER1530

3.1.1 LEDs

SpecificationsoftheLEDsasfollows:

IfthealarmorERRLEDContinuouslight,itshowsthatalarmorerror

alwaysbefound;IftheLEDflashes,itshowsthatalarmorerrorhasbe

foundbutwithoutconfirm.YoucanclicktheHisttocleanthehistory

records.

3.1.2 Buttons

z Powerbutton:Press thebutton topoweron the tester.Whenthetesterisopen,ifcontinuouslyPressthebuttonfor1second

theshutdowndialogueboxwillpopup,theuserclicksokto

close the tester. If the tester cannotbe closedby the related

system icon,Pressthepoweron/offbuttonforabout5second

toshutoffthepowerofthetester.z Softkeyboardkey:pressittorecallsoftkeyboardonthedisplay

bottomorcloseit.

Name Meaning

LOS LossofsignalAIS AISsignalhavebeenfoundLOF/LOP LossofframeorLossofpattern RDI RDIhavebeenfoundERR ErrorhavebeenfoundPower Testeratpoweronstatus

BER1530 7

3.2 TopPanel

3.2.1 PowerAdapterPlug

Specificpoweradapter:Input50HzAC220V(Tolerancerangeis10%),

outputDC8.4V.

3.2.2 E1UnbalancedPort

Unbalancedport(75)forE1output(TX).Unbalancedport(75/highimpedance)forE1input(RX).

3.2.3 E1BalancedPort

Balancedport(120)forE1output(TX:Pin4,5).Balancedport(120/highimpedance)forE1input(RX:Pin1,2).

3.2.4 USBPort

ThetestercanworkasanUSBdisk,afterconnectingtoPC;thestored

recordcanbedownloaded.WecanupgradetesterssoftwareviatheUSBport.

87654321

8 BER1530

3.3 BottomDatacomPort

The datacom port is a DB25 multiprotocol interfacecan supportV.35V.36V.24X.21RS530 etc standard datacom interface viavariousCablewire.

3.4 OtherAccessories

3.4.1 TouchPen

Touchpenisusedtoclickandinputonthescreen.Itisusuallyplaced

inthebackofthetester.Pleasekeepitintotheoriginalpositionafter

usetopreventloss.

3.4.2 L9SelftestCable

UsefortestingtheE1unbalancedports(RX&TX) tochecktheE1testfunction.

3.4.3 LoopbackTestPlug

Usefortestingthedatacomport,tocheckthedatacomtestfunction.

BER1530 9

Chapter4 Operation

4.1 MainOperationInterface

Press the power button and the tester begins to work, DADI logo

displaysonthescreen,thenoperationinterfacedisplaysasfollows:

This bar includes battery volume and present time indication. Click

present timeandadialogueboxwillpopup;youcanmodify time

and date through this dialogue box. When battery icon turns red,

pleasechargeimmediately.

z functionsiconbarThis bar includes some functions icons, each represents a function,

clicktheiconandenterthefunctioninterface.

z ToolBar

statusindicatorbar

functionsiconbar

toolbar

10 BER1530

This bar includes return iconreturn to upper operation

interfaceand SIPiconopen/closesoftinputpanel.

4.2 E1Test

You can make an E1 test by L9 or RJ48 port on the top panel, as

follows:

BER1530 11

4.2.1 E1TestConfiguration

Asabove,wehavepreset twousualmodes:outline testandonline

test. Outline mode is default as BER test with unframe structure,

termination and 2E151 pattern; online mode is default as high

impedancemonitor, LIVE (frame BER) test, only frame structure is

optional.ClickDetailfordetailedconfiguration.

If the above setting can not meet test needs, you can choose

customized mode, and click Detail button .The pop up detail

dialogueboxlistsalloptionalitems,asfollows:

Note:Allmodifications indetaildialogueboxwillbe available,until

youclickOKinConfigdialoguebox.

12 BER1530

4.2.2 TimingTest

As above, you can set single or continuous timing test. Auto test

results will be automatically saved as a file that labeled with test

finishingtime.YoucanviewautotestresultsatRecordsManagement.

BER1530 13

4.2.3 TestandStatistics

Asabove,clickstarttostarttest;asmalltesticonwilldisplayonthe

statusbar forteststatus.ClickErrororRXCLK labeltoseemore

realtimetestresults.

ClickStat.buttonorclickStat. icon inE1 testmain interfaceand

youcanviewtheerroranalysisaccordingtoG.821,G.826,M2100;and

detailsoferrorsoralarms.

14 BER1530

Aneventdetails resolution is1 second, thecount iserrorsquantity

within1secondoralarmsustainedtime.

BER1530 15

4.2.4 ViewData

Thetesterrealtimedisplaysreceivedtimeslotdata,FASwords,MFAS

words,andsignaling.

16 BER1530

4.2.5 DefectInject

Youcanselecttoinjectalarmsorerrors,andasmallinjecticonwill

displayonthestatusbarfordefectinsertstatus.

BER1530 17

4.2.6 VFMeasurementandSPEAKSlot

VoiceFrequencyrangeis503950Hz,levelrangeis359dBm.

18 BER1530

4.2.7 DelayandAPSMeasurement

As thedelayof a loopedback signal,before clicking test key, the

signalmustbeloopbackatremote.Delaytestmaxtimeis3seconds.

BER1530 19

ClickTestkey in10secondsbeforeswitch,andbesurethattester

receives without any alarm and error. After switch, tester will

calculateAPStimeaccordingtothesignaldefects.

4.3 Datacom(VSeriesPort)Test

Youcanmakeadatacom (v seriesport) testbyDB25multiprotocol

portatthebottomoftester,asfollows:

Exceptthetestconfiguration,otherfunctionsaresameastheE1test,

thedatacomsignalconfigurationasfollows:

20 BER1530

4.4 RecordsManagement

The test records are stored into internal flash chip with *.CSV file

format, listed intheViewRecordwindow.Thedisplayofrecords is

thesameasrealtimetest.

BER1530 21

4.5 SaveRecordstoPC

ThetestrecordsalsocanbecopiedtoPCviaUSBport.Whenthetest

isconnectedtoPCbyMini_USBcable,itwillworkasanUSBdiskwith

recordsinCSVfileformatsameasRecordsManagement.

4.6 SystemSettings

Timing set of backlight and automatic shutdown, factoryset and

screencalibrationfunctionareprovided.Asfollows:

Note:FormatDiskwillclearupallstoredtestrecords.

4.7 SoftwareUpgrade

ThetestercanupgradesoftwarethroughUSBport. Inordertoavoid

errors, please contact us before you upgrade (contact on the back

cover),confirmtherequirementandcompletetheupgradeunderour

techniquesupport.

Thedetailedupgradingstepsareasfollows:

1ConnectthetesterUSBportwithPC2Pressthepowerandsoftkeyboardbuttonsatthesametime

22 BER1530

whenthetester isoff,thenthetesterscreenbecomeswhite,waiting

forsoftwareupgrading.

3OpenthesoftwareonPC,anditwillfindainstrumentautomatically(ontheActionscolumntherewillbeasimilardisplay 00 Internal

Flash 256sectors..)asfollows:

4Click button,selecttheupgradedocument.

5Click button to startupgrade, at thismomentthe bottom scroll bar will display the progress. After complete the

upgrade,click toexit.

BER1530 23

Chapter5 MalfunctionAnalysisandSolution

Faults Causes Solutions

Tester can notopen

LowbatteryTurn on after fullcharge

Alarms orerrors existingalways

Be injectingdefects

Cancel error oralarminsertion

LOF occurs onPCM30testing

PCM31systemisSet the tester toPCM31

LOS existingalways

1.NoInputsignal 2.120portisselected

1.Check the inputcable2.Select75port

Errors appearall the time inthe onlinemonitoring.

Test type selectedasBERMode

Select the testtypeasLiveMode

UnknownfaultsThe confusion ofsettings

Load defaultsetting

24 BER1530

BER1530 25

Chapter6 MainTechnicalParameters

6.1 E1BERtestparameter

z internalclock2048KHz5ppmz testcodeHDB3/AMIz framingPCM30/PCM30CRC/PCM31/PCM31CRCunframez testpatternPRBS2n1n=6,9,11,15,20,23,all0all1

101016bitsusertestpatternsz errorinjectiontypebitCodeCRC4FASz errorinjectionmodesinglemultipleRate110nn=34

567z TX clockRXclockinternaloscillatorz alarmdetectionLOSAISLOFRDILOCz TXclockoffset125+125ppmz audiofrequencymeasurementsz frequencyrange50Hz3950Hzresolution1Hzz levelrange+3dBm59dBmresolution1dBmz TXportunbalancedL975balanced120z RXportunbalancedL975balanced120monitor>2K

6.2 Datacomtestparameter

z bitrate50bit/s2048kbit/sz codebinarycodestreamz testpatternPRBS2n1n=6,9,11,15,20,23,all0all1

101016bitsusertestpatterns

26 BER1530

z errorinjectionsingle,Rate110nn=34567z interface standardV.24/RS232V.35V.36/RS449X.21

RS530

6.3 Others

z 320240TFTcolorLCD,touchscreenz embeddedoperationsystem,Iconinterfacez 5000recordscanbesaved,workasanUdisktoPC,z Storagespace: 2MBytez builtin7.4V1500mAhLibatterymaxsystempower2.5Wz batteryoperationtimeabout8hoursz batterychargingtime:about6hoursz temperaturerange

nominalrangeofuse10+50storagerange40+70

z size146mm87mm50mmz weight0.6Kg

Informationaboutservice

CompanyWebsite:http://www.lzdd.com

BusinessLine:(086)1082511182

TechnicalSupportLine:(086)1082867177

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice